Related
RESOLVED
I ran the RUU for my phone, re-ran the update and am stable on 1.08.652.11 710RD
Original post:
I'm getting a consistent kernel crash on all kernels, stock, etc. after the latest HTC update for sprint-vm cdma. Basically, I can get any rom to boot, after about 10-30 seconds, kernel crashes causing the phone to reboot.
I've attached the dmsg log that contains the crash information.
I'm not sure what I can do to fix this issue, as it appears to be a firmware problem. Thoughts?
wendall911 said:
I'm getting a consistent kernel crash on all kernels, stock, etc. after the latest HTC update for sprint-vm cdma. Basically, I can get any rom to boot, after about 10-30 seconds, kernel crashes causing the phone to reboot.
I've attached the dmsg log that contains the crash information.
I'm not sure what I can do to fix this issue, as it appears to be a firmware problem. Thoughts?
Click to expand...
Click to collapse
Try stock kernel if that crashes then custom rom
Sent from my One V using xda app-developers app
cybervibin said:
Try stock kernel if that crashes then custom rom
Click to expand...
Click to collapse
Stock kernel and all custom roms, ICS and JB have the same exact result. This is why I'm suspicious that this was a bad firmware update. I've read several posts about spontaneous reboots, but most people don't know about dmesg, so I don't have anything to compare to.
wendall911 said:
Stock kernel and all custom roms, ICS and JB have the same exact result. This is why I'm suspicious that this was a bad firmware update. I've read several posts about spontaneous reboots, but most people don't know about dmesg, so I don't have anything to compare to.
Click to expand...
Click to collapse
Does it happen like this?
http://www.youtube.com/watch?v=IIqT-xd0AqU&feature=youtu.be
I have the same issue man. It's bizarre.
patbushnell said:
Does it happen like this?
I have the same issue man. It's bizarre.
Click to expand...
Click to collapse
Yes, this is the same behaviour. I'm not sure if you're able to dump the dmsg stuff from adb, but certainly same crash. Typically the phone network status shows a little x, right before the reboot. But the lagginess starts happening when the 5 second kernel reboot is issued.
I've tried to change to airplane mode, disable sdcard and everything else I can think of, still crashing and I'm not able to make much of the logging info
When you applied the OTA were you completely back to stock. Like locked bootloader and stock recovery?
sentfromybrain
aaronrw said:
When you applied the OTA were you completely back to stock. Like locked bootloader and stock recovery?
sentfromybrain
Click to expand...
Click to collapse
Yes, completely back to stock. Unfortunately, I didn't create a backup of the stock image that booted after the OTA update was applied I just restored pre-OTA rom, cwm recovery and boot.img. Everything appeared to be working fine after the update on the stock ROM. However, I didn't leave it on long enough to confirm if the crash issue existed then. Just checked the version info to confirm the update had been applied and rebooted.
UPDATE
I'm going to go through the process again with the RUU and see if I can boot something stable.
wendall911 said:
Yes, completely back to stock. Unfortunately, I didn't create a backup of the stock image that booted after the OTA update was applied I just restored pre-OTA rom, cwm recovery and boot.img. Everything appeared to be working fine after the update on the stock ROM. However, I didn't leave it on long enough to confirm if the crash issue existed then. Just checked the version info to confirm the update had been applied and rebooted.
UPDATE
I'm going to go through the process again with the RUU and see if I can boot something stable.
Click to expand...
Click to collapse
You will surely get the RUU to make your phone working perfectly. That's what I did.
patbushnell said:
You will surely get the RUU to make your phone working perfectly. That's what I did.
Click to expand...
Click to collapse
Confirmed RUU -> Update worked the second time. This is probably the safest method. This appeared to work initially, but clearly did not. Thanks for all the feedback!
I can't get any non-stock rom to boot after applying the OTA update. Well ok it boots but loops after about 10-15 seconds.
I have to RUU it and not apply the update to get any non-stock rom to work.
CDMA/VMUSA here.
---------- Post added at 09:24 PM ---------- Previous post was at 09:19 PM ----------
wendall911 said:
Confirmed RUU -> Update worked the second time. This is probably the safest method. This appeared to work initially, but clearly did not. Thanks for all the feedback!
Click to expand...
Click to collapse
So are you able to run any other roms without reboots? Or are you only on stock?
MasterTec said:
I can't get any non-stock rom to boot after applying the OTA update. Well ok it boots but loops after about 10-15 seconds.
I have to RUU it and not apply the update to get any non-stock rom to work.
CDMA/VMUSA here.
---------- Post added at 09:24 PM ---------- Previous post was at 09:19 PM ----------
So are you able to run any other roms without reboots? Or are you only on stock?
Click to expand...
Click to collapse
I applied the OTA update. Only the stock kernel (after update) will boot now. Any non-stock kernel crashes - always seems the last line is rmt_storage, which the IPC to shared memory of the boot loader I believe.
Noob question
wendall911 said:
Yes, completely back to stock. Unfortunately, I didn't create a backup of the stock image that booted after the OTA update was applied I just restored pre-OTA rom, cwm recovery and boot.img. Everything appeared to be working fine after the update on the stock ROM. However, I didn't leave it on long enough to confirm if the crash issue existed then. Just checked the version info to confirm the update had been applied and rebooted.
UPDATE
I'm going to go through the process again with the RUU and see if I can boot something stable.
Click to expand...
Click to collapse
Can you link me to a working RUU?
i got my one v primoc back in the beginning of summer, but then something fell on it and cracked the screen super bad but i loved the phone so much that i bought another at the end of october. i unlocked, wiped, and flashed JB roms... which seemed to work fine for a while & then would have issues of staying stuck in roaming. i've tried different roms. i never had this issue with my first one v... could my new one have the update already when i bought it? i ran the RUU football posted and was able to boot the stock rom... but right away it goes into roaming again, with my phone not even recognizing that it's using a VM service.
real confused...
jetfactor said:
i got my one v primoc back in the beginning of summer, but then something fell on it and cracked the screen super bad but i loved the phone so much that i bought another at the end of october. i unlocked, wiped, and flashed JB roms... which seemed to work fine for a while & then would have issues of staying stuck in roaming. i've tried different roms. i never had this issue with my first one v... could my new one have the update already when i bought it? i ran the RUU football posted and was able to boot the stock rom... but right away it goes into roaming again, with my phone not even recognizing that it's using a VM service.
real confused...
Click to expand...
Click to collapse
Yes it's possible that you got one with the update already on it however the problem you are having is completely different than the problem we're describing in this thread and could be caused by many other things - not necessarily the OTA update.
Seems a bit off topic for this thread...
More of the rebooting problem
I have 2 phones one with this problem, the other without it. My friend got one of these phones after i installed jelly bean on mine. He had it long enough to have updated the firmware using the stock image. I made a backup of the stock image, but it seems to have been corrupted (zero byte .zip file). I need to get the phone working (stock or updated, at this point there is no preference so long as it works)
In the bootloader, the radio version of the crashing one is:
1.00.00.0928
The working one is:
1.00.00.0521_2
As far I can tell, this is the only difference. I Used the same SD card and the same procedure for wipe/installing the OS with the same files.
Have you found a solution to this? If so, can you point me to the downloads/instructions for how to fix it?
Looking for help
wendall911 said:
RESOLVED
I ran the RUU for my phone, re-ran the update and am stable on 1.08.652.11 710RD
I'm not sure what I can do to fix this issue, as it appears to be a firmware problem. Thoughts?
Click to expand...
Click to collapse
This may be a bit noob-ish, but can you please add instructions with links for any downloads. I am new to android hacking and have not yet picked up all of the short hand.
Thanks!
madhephaestus said:
This may be a bit noob-ish, but can you please add instructions with links for any downloads. I am new to android hacking and have not yet picked up all of the short hand.
Thanks!
Click to expand...
Click to collapse
hey can i please know how to fix the radio on my phone i have the same problem, my phone will boot and turn on but after 10 seconds in turns off again and boots again? can i please get help ?
I had previously tried to root my phone and decided to flash it back to factory. I downloaded last nights OTA 4.3 update and after it installed, now my ATT S3 SGHi1747 gets stuck at the ATT logo AFTER the Samsung logo appears then disappears. My pc is no longer recognizing the device nor do I know how to get in there to at least get it up and running to try and flash it back to factory THEN download 4.3.
Any suggestions on how to get this fixed would be appreciated!
'Sider said:
I had previously tried to root my phone and decided to flash it back to factory. I downloaded last nights OTA 4.3 update and after it installed, now my ATT S3 SGHi1747 gets stuck at the ATT logo AFTER the Samsung logo appears then disappears. My pc is no longer recognizing the device nor do I know how to get in there to at least get it up and running to try and flash it back to factory THEN download 4.3.
Any suggestions on how to get this fixed would be appreciated!
Click to expand...
Click to collapse
ODIN back to stock.
Question
Did you try using ODIN or did you find a factory ROM to flash?
'Sider said:
I had previously tried to root my phone and decided to flash it back to factory. I downloaded last nights OTA 4.3 update and after it installed, now my ATT S3 SGHi1747 gets stuck at the ATT logo AFTER the Samsung logo appears then disappears. My pc is no longer recognizing the device nor do I know how to get in there to at least get it up and running to try and flash it back to factory THEN download 4.3.
Any suggestions on how to get this fixed would be appreciated!
Click to expand...
Click to collapse
Try booting into recovery and factory resetting, this usually fixes this problem.
polobunny said:
ODIN back to stock.
Click to expand...
Click to collapse
Downloaded ODIN, still a little fuzzy on how to operate it
Cadle said:
Did you try using ODIN or did you find a factory ROM to flash?
Click to expand...
Click to collapse
Im not too tech savvy obviously lol, can you point me in the direction of a factory ROM
dntesinfrno said:
Try booting into recovery and factory resetting, this usually fixes this problem.
Click to expand...
Click to collapse
Tried this twice, no luck.
Im assuming once I get this thing flashed back, I can download that app that will reset the counter?
'Sider said:
Downloaded ODIN, still a little fuzzy on how to operate it
Click to expand...
Click to collapse
If you google for "odin flash rom" there's lot of good tutorials out there, many on this forum alone. As for stock, i'm not sure where to find it since I flashed custom the day after I got my phone and never looked back...can't stand stock touchwiz. You could also try flashing any custom ROM you happen to have layin around...worth a shot until you find a custom one. I use BeanStalk ROM, which has 4.3 and 4.4 versions out now.
Best of luck to ya!
goombah88 said:
If you google for "odin flash rom" there's lot of good tutorials out there, many on this forum alone. As for stock, i'm not sure where to find it since I flashed custom the day after I got my phone and never looked back...can't stand stock touchwiz. You could also try flashing any custom ROM you happen to have layin around...worth a shot until you find a custom one. I use BeanStalk ROM, which has 4.3 and 4.4 versions out now.
Best of luck to ya!
Click to expand...
Click to collapse
I suggest here that everyone here read some of the other threads here on XDA, and see all the problems people are having flashing and rooting after taking this latest 4.3 OTA before advising the next person on how to make ANOTHER paper weight.
As for Sider,
You might be out of luck here, as there is no official 4.3 firmware yet available to flash back to stock, and also AT&T has done something with the new software update, where trying to downgrade it back to a previous version is going to either fail or brick phones.
Also, I haven't read yet where anyone has been successful flashing a custom recovery to fix any issues, but the posts are going up so fast right now that I might have easily missed it.
Edit: OK, someone was able to get TWRP installed, but is also having issues with root.
polobunny said:
ODIN back to stock.
Click to expand...
Click to collapse
DO NOT ODIN after last update (OTA 4.3) installed on phone. You will brick your phone.
norbarb said:
DO NOT ODIN after last update (OTA 4.3) installed on phone. You will brick your phone.
Click to expand...
Click to collapse
You're right. I completely forgot about that.
I have been using Cyanogenmod 11 Nightlies for my device for about as long as they have been out, so I know it is still a work in progress, and most of the issues I have faced have gone away as newer nightly builds have been released, so I have not reported any issues as of yet.
Within the last month or so, I have noticed a new issue. The mobile data has been randomly cutting out, allowing only emergency phone calls. It only goes out for about a minute or two, but it is still a huge inconvenience. It seems to happen randomly, except after I finish a phone call -- it almost always cuts out immediately after (very frustrating for when calls are dropped, because I need to wait a minute or two before I can call back).
Has anyone else experienced this or know of a fix? I just tried re-flashing the latest radio and that did not seem to help. I have also tried full system/data wipes as well and none of the Nightly builds for the last month or so have been able to fix it.
Thanks, everyone.
You need to flash any touchwiz rom in order reset your nvram.
Corvetrims77 said:
You need to flash any touchwiz rom in order reset your nvram.
Click to expand...
Click to collapse
Is that even possible? I thought there were issues with going from 4.4.x back to 4.3?
Also, how would I go about locating the latest stock firmware and flashing it? I haven't even thought about touching stock since flashing CM.
pravus87 said:
Is that even possible? I thought there were issues with going from 4.4.x back to 4.3?
Also, how would I go about locating the latest stock firmware and flashing it? I haven't even thought about touching stock since flashing CM.
Click to expand...
Click to collapse
I can't find the original post, I don't have time to look for it right now, it was discussed frequently in Quantumroms thread. I needed to do this as I was experiencing the same issue. I restored the stock firmware on my device via samsungKise ( http://forum.xda-developers.com/showthread.php?t=2390147).
Corvetrims77 said:
I can't find the original post, I don't have time to look for it right now, it was discussed frequently in Quantumroms thread. I needed to do this as I was experiencing the same issue. I restored the stock firmware on my device via samsungKise ( http://forum.xda-developers.com/showthread.php?t=2390147).
Click to expand...
Click to collapse
I will take your word for it. But I have read elsewhere that the MJB bootloader makes it impossible to downgrade, which after checking, is the one that I have installed.
I have done the research on how to install stock firmware. I am just a little hesitant to do so. Any re-assurances would be great.
pravus87 said:
I will take your word for it. But I have read elsewhere that the MJB bootloader makes it impossible to downgrade, which after checking, is the one that I have installed.
I have done the research on how to install stock firmware. I am just a little hesitant to do so. Any re-assurances would be great.
Click to expand...
Click to collapse
From what I have read you are correct, but you just need to install any Touchwiz Rom, search through the quantum posts you will find your answers.
Corvetrims77 said:
From what I have read you are correct, but you just need to install any Touchwiz Rom, search through the quantum posts you will find your answers.
Click to expand...
Click to collapse
Thanks for your help. I was able to flash stock 4.1.1 and then reinstall CM11. So far, looks like the mobile data issue has been resoled.
pravus87 said:
Thanks for your help. I was able to flash stock 4.1.1 and then reinstall CM11. So far, looks like the mobile data issue has been resoled.
Click to expand...
Click to collapse
I'm having the same issue, would you mind giving a quick run through of what you did? I'm downloading the I747MVLUEMK5 firmware to flash in Odin right now. Don't want to do something I shouldn't.
mreadshaw said:
I'm having the same issue, would you mind giving a quick run through of what you did? I'm downloading the I747MVLUEMK5 firmware to flash in Odin right now. Don't want to do something I shouldn't.
Click to expand...
Click to collapse
I actually did not use Odin at all. I was able to find a thread that posted a 4.1.1 stock .zip, a .zip to keep root, and a .zip to keep custom recovery. (I have tried searching for the thread to share with you but am unable to find it). I was definitely over-thinking it. Just install the .zips from TWRP or CWM as you would any other custom ROM -- just make sure you do not have the 4.3 bootloader installed. That's it.
Sorry for the delayed response!
ok guys, i have a question for you. keep in mind that im new to the phone world lol. ok so a bout a month ago i wanted to unroot my phone but for some reason the tar files on sammobile wasnt working right. so i came on here and downloaded what i believed to be the file that i needed to go back to stock. after i used odin and the phone rebooted it automatically notified me that i had a update. after i accepted the update and it rebooted, it again notified me that i have yet another update. so after this happened i noticed that my phone was updated to 4.4.4 kitkat which would be great exept for the fact that it keeps freezing and when i am on wifi i have a problem getting phone calls aswell as text messages. also when i disconnect from wifi i have to restart the phone to get any data back. is there anything that i can do? is it possible to go back to 4.3 or even 4.2.2? any help would be very much appreciated.
hellrazr209 said:
ok guys, i have a question for you. keep in mind that im new to the phone world lol. ok so a bout a month ago i wanted to unroot my phone but for some reason the tar files on sammobile wasnt working right. so i came on here and downloaded what i believed to be the file that i needed to go back to stock. after i used odin and the phone rebooted it automatically notified me that i had a update. after i accepted the update and it rebooted, it again notified me that i have yet another update. so after this happened i noticed that my phone was updated to 4.4.4 kitkat which would be great exept for the fact that it keeps freezing and when i am on wifi i have a problem getting phone calls aswell as text messages. also when i disconnect from wifi i have to restart the phone to get any data back. is there anything that i can do? is it possible to go back to 4.3 or even 4.2.2? any help would be very much appreciated.
Click to expand...
Click to collapse
Hello! Did you make a back up of your phone before you started the update? That would be the easiest way to go back to how it was. If you used Odin and didn't install a recovery like TWRP or Clockwork you may not have done so. I believe you can reload from Odin with an older ROM it will just erase everything you did. There are stock ROMS here at XDA and galaxynote3root.com as well. Let me know it this helps, sorry for your troubles.
5225
Jedidanno said:
Hello! Did you make a back up of your phone before you started the update? That would be the easiest way to go back to how it was. If you used Odin and didn't install a recovery like TWRP or Clockwork you may not have done so. I believe you can reload from Odin with an older ROM it will just erase everything you did. There are stock ROMS here at XDA and galaxynote3root.com as well. Let me know it this helps, sorry for your troubles.
Click to expand...
Click to collapse
Thanks for the reply, so i wont have any problem downgradeing? I think i read somewhere that i could brick my phone. And if it is possible what version am i able to go back to?
Oh and to answer your question, i have never has a custom recovery on this phone and i didnt make a back up.
Can you post a screenshot of your about phone page?
Techniques said:
Can you post a screenshot of your about phone page?
Click to expand...
Click to collapse
is this good
I'm actually surprised that you did get an update to 4.4.4... You could try going back to NF9. The safest route I see that you can take is to install a custom recovery and make a backup before doing this. If you odin NF9 and it doesn't boot then you're kinda screwed because we technically don't have the 4.4.4 update yet, so if anything goes wrong, you can install a recovery again and restore the 4.4.4 backup.
Techniques said:
I'm actually surprised that you did get an update to 4.4.4... You could try going back to NF9. The safest route I see that you can take is to install a custom recovery and make a backup before doing this. If you odin NF9 and it doesn't boot then you're kinda screwed because we technically don't have the 4.4.4 update yet, so if anything goes wrong, you can install a recovery again and restore the 4.4.4 backup.
Click to expand...
Click to collapse
haha i was surprised to, i cant find anyone else that has it with this phone either, i was kinda wondering if i maybe downloaded the wrong file maybe for a different country or carrier. im not sure how to do the hole backup and custom recovery thing.
hellrazr209 said:
haha i was surprised to, i cant find anyone else that has it with this phone either, i was kinda wondering if i maybe downloaded the wrong file maybe for a different country or carrier. im not sure how to do the hole backup and custom recovery thing.
Click to expand...
Click to collapse
You can get the latest TWRP recovery here : http://www.techerrata.com/file/twrp2/hltetmo/openrecovery-twrp-2.8.1.0-hltetmo-4.4.img.tar
Just odin that and after it's done, go into recovery by doing Vol down + Home and do a backup either in your internal or external storage. After that finishes, you can go back in download mode and odin NF9.
ok thanks for all you help man,
hellrazr209 said:
is this good
Click to expand...
Click to collapse
iam surprised as well how did you get the latest tar on tmobile note 3?
chipis said:
iam surprised as well how did you get the latest tar on tmobile note 3?
Click to expand...
Click to collapse
I got it on here, it was a tar for 4.4.2 i believe and after i downloaded it, it said i had a update. After that i had another update lol which brought me to the hell im in now lol 4.4.4
hellrazr209 said:
I got it on here, it was a tar for 4.4.2 i believe and after i downloaded it, it said i had a update. After that i had another update lol which brought me to the hell im in now lol 4.4.4
Click to expand...
Click to collapse
Well i believe if iam right samobile had not release it for tmo yet
chipis said:
Well i believe if iam right samobile had not release it for tmo yet
Click to expand...
Click to collapse
Yeah its not on their website. I have know idea what i got then lol anyway to fine out if i have something i shouldnt?
My problem started some months ago, when a friend tried to root my phone, he told me that he rooted it but every app that checks for root told me that it wasn't rooted and i couldn't use apps that needed root also, the downside to all this is that i couldn't use apps that do not allow root, like the banking app, or Pokemon Go, but i used the phone like that for some months until last week when i decided to try and fix it. I thought that if i flash a stock firmware everything should be fine and the phone should be as new. On the phone, it says that the model is SM-N910F(behind the battery), in the settings it also said SM-N910F, so i tried flashing a rom for this model at first and it kept failing with me not knowing why. After trying different thing and googleing some time, i finally noticed that in "Fast Download", it says that the phone's model is SM-N910P, so i started searching about this, i didn;t understand why there were 2 different models on my phone, then i found out about searching my IMEI on imei.info, so i tried it and here it was SM-N910C, i had no idea what all this meant, but at this time i already got stuck into bootloop. Eventually, i found this thread: https://forum.xda-developers.com/note-4/help/help-sm-n910f-sm-n910p-bootloader-t3299285 and did what cam_bob22 said, it worked, i finally flashed the firmware on my phone and it worked, i could use the bank app, pokemon go, everything was fine except the fact that i couldn't select or change my mobile operator, when going to mobile networks, the mobile operators options was greyed out and couldn't be pressed(i want to mention that i did have service and that data worked but the internet would work only in roaming and i couldn't get 4G). So i tried updating the software from 5.1.1 to 6.0.1 like it was said in the instructions and hopping that this update would fix the issue, but unfortunately for me after the update i somehow lost service completely, the signal sign was in the shape of a triangle with no bars, and the mobile operators setting was exactly as before.
So far i tried going back to 5.1.1 but besides the Hands Free activation that i can't make to go away, i still can't use the mobile operators setting and my data only works with roaming activated and doesn't get 4g. One thing that i forgot to mention is that the IMEI with the 5.1.1 firmware was of a samasung Galaxy S5 not a note 4, i checked it on imei.info.
I was wondering if there is any way for me to go back to the OS i had before my friend tried to root my phone, when it said in the settings that it was SM-N910F and everything worked as it should have.
Thank you for reading and i really hope someone can help me.
@robert11arad
There is no way to go back unless he made a backup. Which is why you should always do this before you flash anything.
I'm not sure if this will help but you could try flashing a international custom Rom after you have correct firmware. But if your phone is a Sprint version, you'll have to use a special data fix and kernel.
What firmware did you end up using to flash? Was it Sprint? If so, and you use gsm service, try flashing my Gsm stock Rom for Sprint phones. It's in post 2.
https://forum.xda-developers.com/no...t/05-15-17-debloated-deodexed-rooted-t3607029
You'll first need to be on current marshmallow firmware. So flash firmware with Odin first, then install Twrp with Odin. Then install Rom with Twrp.
aaron74 said:
@robert11arad
There is no way to go back unless he made a backup. Which is why you should always do this before you flash anything.
I'm not sure if this will help but you could try flashing a international custom Rom after you have correct firmware. But if your phone is a Sprint version, you'll have to use a special data fix and kernel.
What firmware did you end up using to flash? Was it Sprint? If so, and you use gsm service, try flashing my Gsm stock Rom for Sprint phones. It's in post 2.
https://forum.xda-developers.com/no...t/05-15-17-debloated-deodexed-rooted-t3607029
You'll first need to be on current marshmallow firmware. So flash firmware with Odin first, then install Twrp with Odin. Then install Rom with Twrp.
Click to expand...
Click to collapse
Thank you for the reply, i wanted to say that with the Sprint firmware i used, after doing all the updates it unlocked the mobile operators option, but it couldn't find any.
robert11arad said:
Thank you for the reply, i wanted to say that with the Sprint firmware i used, after doing all the updates it unlocked the mobile operators option, but it couldn't find any.
Click to expand...
Click to collapse
Oh ok. So do you have service?
aaron74 said:
Oh ok. So do you have service?
Click to expand...
Click to collapse
No, the network operators is unlocked but there's still no service, when i try scanning for an operator it just stops with no message, and nothing happens.
I forgot to mention this, but before all this happened, I made a back-up of the phone with smart switch, is it possible to get back to how it was using that? And another thing is that when using the backup, it only restores music and photos, no contacts, no apps.(From what i've noticed so far)
robert11arad said:
No, the network operators is unlocked but there's still no service, when i try scanning for an operator it just stops with no message, and nothing happens.
I forgot to mention this, but before all this happened, I made a back-up of the phone with smart switch, is it possible to get back to how it was using that? And another thing is that when using the backup, it only restores music and photos, no contacts, no apps.(From what i've noticed so far)
Click to expand...
Click to collapse
You would have needed a system backup with twrp.
What country you in? What network you on? What firmware you on?
aaron74 said:
You would have needed a system backup with twrp.
What country you in? What network you on? What firmware you on?
Click to expand...
Click to collapse
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
robert11arad said:
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
Click to expand...
Click to collapse
Ok. About the best advice i can give is, because your on pure Sprint Rom, something is messing up with csc or something.
All i can suggest, is maybe try updating to QC1 with Odin and then try flashing my gsm Rom. Which is essentially just a tmobile rom.
And if that don't give you the function you you need. Then maybe try an international Rom.
It's hard to say what the last person did to the phone.
robert11arad said:
I live in the UK, i'm on giffgaff and the firmware is N910PVPU4COG5_N910PSPT4COG5_N910PVPU4COG5
Click to expand...
Click to collapse
Also. You stated your phone first showed as a 910f. So maybe flashing a international F rom, will provide the correct csc settings for your phone to work. Only problem your gonna have, is because it's Sprint hardware, you'll have to pair the Rom with a kernel that'll work and some lib files for data.
I can help you by putting together some files to flash. But the main question would be, Do you want a stock note 4 Rom?
Also before any of this happened, do you know what firmware you were on? Marshmallow? Lollipop?
aaron74 said:
Also. You stated your phone first showed as a 910f. So maybe flashing a international F rom, will provide the correct csc settings for your phone to work. Only problem your gonna have, is because it's Sprint hardware, you'll have to pair the Rom with a kernel that'll work and some lib files for data.
I can help you by putting together some files to flash. But the main question would be, Do you want a stock note 4 Rom?
Also before any of this happened, do you know what firmware you were on? Marshmallow? Lollipop?
Click to expand...
Click to collapse
I would really appreciate if you helped me put the files together cause i have no idea how any of this works, i'm new. But i wanted to ask, is there any chance for thia to brick my phone?
When it had sm-n910f on it i couldn't update it after 5.1.1, when i pressed update it wouldn't do anything.
And yes, if possible i would like it to be a stock firmware, but if it is not possible i don't mind using something else as long as it works properly.
Thank you for all your help, i don't know what i would do otherwise.
robert11arad said:
I would really appreciate if you helped me put the files together cause i have no idea how any of this works, i'm new. But i wanted to ask, is there any chance for thia to brick my phone?
When it had sm-n910f on it i couldn't update it after 5.1.1, when i pressed update it wouldn't do anything.
And yes, if possible i would like it to be a stock firmware, but if it is not possible i don't mind using something else as long as it works properly.
Thank you for all your help, i don't know what i would do otherwise.
Click to expand...
Click to collapse
Well, first, let me state,about bricking device. I have to state that it's not impossible to brick. But after hundreds of flashes never had problem. These devices are hard to brick. What hard bricks a device is messing with boot loader and partitions that shouldn't be messed with, like trying to unlock lte bands. But just flashing roms is fine unless you flash a Rom not for your phone and it over writes wrong partition.
All snap Dragon note 4s have the same layout so all you need is correct kernel, csc, and some ril lib files to get data working.
Now, mine main worry is that the phone is still unlocked,because I don't know what possible changes were made to it.
But with all that being said,I'll move on. With another post.
---------- Post added at 05:52 PM ---------- Previous post was at 05:13 PM ----------
@robert11arad
Before we go too deep into this and upgrade and stuff. I'd like to just test a custom Rom on your phone and see what works.
So what firmware are you on right now?
5.01, 5.1.1, or 6.0.1?
I'm gonna take a guess and move on. You last stated you were on OG5 which it's 5.1.1. So if that's true, let's try the following.
First I'm gonna assume you already used Odin to flash that firmware. So now we need to flash Twrp. So download this on pc https://eu.dl.twrp.me/trlte/twrp-3.1.1-0-trlte.img.tar
1 . Put phone in download mode. Open Odin and plug in phone.
2. In Odin options make sure everything is unticked except Reset Flash Counter.
3. Now click on AP and select the Twrp file.
4. Flash it. Let it flash until it states it's completed. Once done. Unplug phone. Pull out battery. Put back in and boot to recovery by holding power+home+vol.up
5. Now you should have Twrp. Just reboot phone so we can continue to next post.
PM sent
@robert11arad
Ok, here you go. If your where we left off, you should be on stock QC1 and have Twrp installed.
Just download this file, boot into recovery, and install. This file will delete dalvick/cache, so phone will take a few minutes to boot up.
I actually recommend before flashing, you do a factory reset in recovery then install.
Anyhow here you go. Let me know if it fixes what your looking for. If not, my only others option is to install a custom n910f Rom. I'll gladly walk you through if need be. But try this first.
aaron74 said:
@robert11arad
Ok, here you go. If your where we left off, you should be on stock QC1 and have Twrp installed.
Just download this file, boot into recovery, and install. This file will delete dalvick/cache, so phone will take a few minutes to boot up.
I actually recommend before flashing, you do a factory reset in recovery then install.
Anyhow here you go. Let me know if it fixes what your looking for. If not, my only others option is to install a custom n910f Rom. I'll gladly walk you through if need be. But try this first.
Click to expand...
Click to collapse
Alright so i just tried it and when starting my phone, i can't even set it up because i keep getting a message that com.android.phone has stopped. After about half an hour of trying to start it, i finally managed to get to setting and to app manager, there i looked for com.android.phone and it was nowhere to be found. Apart from this i noticed a N with some signal bars where my phone signal should've been and i didn;t get the hands free activation anymore, but that's all...
robert11arad said:
Alright so i just tried it and when starting my phone, i can't even set it up because i keep getting a message that com.android.phone has stopped. After about half an hour of trying to start it, i finally managed to get to setting and to app manager, there i looked for com.android.phone and it was nowhere to be found. Apart from this i noticed a N with some signal bars where my phone signal should've been and i didn;t get the hands free activation anymore, but that's all...
Click to expand...
Click to collapse
Ok. I must have forgot something in csc. Sorry. I'll get back with you.