How to set Frequency Keep on 810 Mhz and never get back as default frequency 1512Mhz? (Like the Frequency FILTER) ,
I often use ZL to play games with very long time (4 hours/day) already im set the freq to 810 Mhz , Interactive / CFQ but while playing Heavy Games the Freq Is cumback *Comeback* to the Default as 1512 Mhz. and make Device Going very HOT and drain battery Very Fast . I think if the Freq down and only 2 CPU works the Device not too hot for playing games and Battery not Drain Fast...Anybody got Right Solution ?
*Wi-fi not active and Im usually using 3G/HSDPA for Internet Connection.
Related
Hi,
I purchased SetCPU last night from Android market but I am unable to select the correct settings for it. I tried with 'Powersave' preset as I was going to sleep, but after 5 mins when I checked my phone it was off! and I had to turn it on. Every time I select Powersave mode it is forcing the phone to go off. Then I selected 'Ondemand' preset and went to bed at 0245 hrs. Today when I woke up at 1200 hrs ( ) the battery was at 48%, while yesterday night when I selected ondemand preset it was at 53%, it's a gap of 10 hours, in the mean time the Phone was in Flight mode and everything was set to OFF. So that's a 5% battery decrease overnight. But before that, when I was at all Default settings without SetCPU installed the battery was decreasing at a rate of 2-3% overnight under same settings. So I wonder after installing SetCPU the battery back up isn't extended but actually decreased. So I was thinking it may be a problem with my settings. Can you guys please tell me that what settings should I use to get the maximum juice out of my battery and that without compromising the clock rate of the CPU? Isn't there an Automatic settings that the CPU will run at Full speed when needed and check it's speed when in Idle? I thought 'Ondemand' preset would serve that purpose but I was wrong I guess!
Thanks in advance.
Here is a screen from SetCPU,
Regards.
I've got the same problem,any help would be appreciated.
Max 500 Min 200 and work from that adjust as needed .
jje
JJEgan said:
Max 500 Min 200 and work from that adjust as needed .
jje
Click to expand...
Click to collapse
Oh! And by setting the upper limit to 500 MHz we won't ever be able to use the CPU at 1200 MHz, great. I should've stick with my S8500 then, eh? What do you say?
ithehappy said:
Oh! And by setting the upper limit to 500 MHz we won't ever be able to use the CPU at 1200 MHz, great. I should've stick with my S8500 then, eh? What do you say?
Click to expand...
Click to collapse
aren't you eager to criticize. there are something called profiles. does your phone require to use 1.2 ghz in sleep , low battery conditions or overheating conditions? galaxy s2 uses ondemand governor at 200 to 1200 by default. meaning when it needs power it will ramp up to 1200. it does this in steps higher than battery saving governors so you spend more time in 1.2 ghz
my advice
sorted by priority
screen off = 200 - 500
in battery < 30 use 200 to 800
overheating = 200 - 800
charging = full speed
regular use when no profiles apply = full speed
Hi all, first post here at xda, am fairly new to android devices and am wondering if someone could share some knowledge please? After installing my first Rom (m1ndh4x3r 2.3.5) I haven't been receiving any calls... A friend today said I may be underclocking the phone too much for it to wake on time to ring? Had it set at 200mhz with screen off. After setting it to 480mhz I received a call straight away, question is, have you had this problem too and what's the lowest setting advised that I can have it on please?
Thanks in advance for any help/advice
Your phone is built to run at 600 MHz. Not at 200. You can use apps like setcpu and no frills cpu control to control your phone. These apps let you set the minimum and maximum value of the cpu frequency. You should let it run at its full capability. Optimal settings would be something like
Min: 320
Max: 600
Governor: smartass2
You can underclock more when you are not using it or not expecting calls ( in the night).
You can also set your minimum to 120 MHz, but usually, it'll go into deep sleep mode, rather than stay on 120 MHz. Also, when listening to music, I've noticed, it stays on 320 MHz.
My minimum setting is 120 independently from which ROM (i tried 5 ROMs) I use (3month use = 0 problems).
hey folks...
(sorry for my bad english )
Im using wildchild rom 2.0... using No-Frills CPU Control i over-clocked my cpu to
Max = 768 Mhz
Min = 122 Mhz
Gov = Scary
I/O = sio
phone runs smoothly without any lags and probs... but when i play music it plays without trouble and when the screen off the music starts to stuck ... and i cannot immediately wake my phone... it takes about 15 sec to get screen on ... so i changed the gov to - smartassv2 (with same freq)... and checkd the music.. it is playing smoothly.. then i put the phone on charger and gone out... my mom called me thinking that im having the phone... now my mobile got frozen at my mom's incoming call screen.. so i pulled the battery and turned on the phone
pls help.. which is the best frequency, gov for normal use... ( i want better battery backup)...
Kishoke said:
hey folks...
(sorry for my bad english )
Im using wildchild rom 2.0... using No-Frills CPU Control i over-clocked my cpu to
Max = 768 Mhz
Min = 122 Mhz
Gov = Scary
I/O = sio
phone runs smoothly without any lags and probs... but when i play music it plays without trouble and when the screen off the music starts to stuck ... and i cannot immediately wake my phone... it takes about 15 sec to get screen on ... so i changed the gov to - smartassv2 (with same freq)... and checkd the music.. it is playing smoothly.. then i put the phone on charger and gone out... my mom called me thinking that im having the phone... now my mobile got frozen at my mom's incoming call screen.. so i pulled the battery and turned on the phone
pls help.. which is the best frequency, gov for normal use... ( i want better battery backup)...
Click to expand...
Click to collapse
Set the minimum to 245 Mhz nd Governer to smartass. See if it fixes it.
I am currently doing some o/c on the Perseus-alpha27.4-i317-CWM. I noticed that when I force the cpu speed on STweaks with a minimum and maximum at 1800mhz, and run a stability test (on Stability Test) it would run for a while on 1800mhz. But then after a few minutes it would start to switch back and forth between 1800mhz and 1000mhz.
It doesn't just do this for 1800mhz. It does it for lower speeds as well. So if I force the speed to go at 1700mhz, it would be switch off between 1700mhz and some number below 1000mhz (I forgot what the exact number was).
Can anyone shed some light on why it is doing this even though I forced the cpu speed on STweaks at a set speed?
My CPU Speed automatically goes down to 810Mhz on all overclocked kernels.
Even in CM10 kernels,
It happens in between while I play a game or so.
Even if I install Kernel with only GPU overclock, it still happens.
But never happens on stock kernels. I have to manually increase the CPU speed by setCPU.
Any Solutions for it Guys?
Moved to Q&A
Try to use Kernel tuner, and normally the device uses 810 mhz too cool down...
patato800 said:
Try to use Kernel tuner, and normally the device uses 810 mhz too cool down...
Click to expand...
Click to collapse
Used kernel tuner but still the same result, it goes to 810mhz even if the phone is not hot (just homescreen) and when i increase it, it remains at max even if i play games and make it hot. but after some time (say 15 or 20 minutes) even if I am in standby mode the cpu goes down to 810Mhz. previously at some point it was 1134Mhz.
Guys, anyone with some help. It has even started to occur in Complete stock ROM. (flashed the ftf on locked bootloader, still the max cpu spped drops from 1.5 Ghz to 810 Mhz, some times both cores)
halleyrokz said:
Guys, anyone with some help. It has even started to occur in Complete stock ROM. (flashed the ftf on locked bootloader, still the max cpu spped drops from 1.5 Ghz to 810 Mhz, some times both cores)
Click to expand...
Click to collapse
I had the same problem but i discoverd that the Battery saver pro causes that problem for me. If you use the seme app untick control CPU frequency.
It is actually a built in security feature of our phones which gets activated when temperature of phone goes high . At least that's what I know .
Sent from my Xperia S using xda premium
Here's solution!!!
http://forum.xda-developers.com/showthread.php?p=32245228
Send from my stupid lt26i