Related
Hello guys. I got my Note 8 at the holidays, I used OTA to get the 4.2.2 update, and I used autoroot, and just checked my recovery and I have Philz touch 5 installed.
When I check for OTA updates, I find the message your device has been modified, no updates available.
I am running stock 4.2.2. Do I need to unroot and return to stock recovery for OTA updates? I did not remove any apps or freeze anything. The only difference is recovery and being rooted. This question is in anticipation of the release of 4.4 kitkat, slated to be pushed to our device- but I'm not holding my breath for when that will be.
Thanks for your input!
sashusmom said:
Hello guys. I got my Note 8 at the holidays, I used OTA to get the 4.2.2 update, and I used autoroot, and just checked my recovery and I have Philz touch 5 installed.
When I check for OTA updates, I find the message your device has been modified, no updates available.
I am running stock 4.2.2. Do I need to unroot and return to stock recovery for OTA updates? I did not remove any apps or freeze anything. The only difference is recovery and being rooted. This question is in anticipation of the release of 4.4 kitkat, slated to be pushed to our device- but I'm not holding my breath for when that will be.
Thanks for your input!
Click to expand...
Click to collapse
Hi, I had rooted my 4.2.2 and installed a bunch of root apps... At this time, my Kies says there are no updates available. You will have to wait for 4.4.3 to come out for any update feature to work.
For myself I will do a factory system reset to bring my tablets update apps out of freeze and clear out any cache and the apps that were installed. Once the tablet is booted, I use Kies to push the new firmware once it is released.
Care should be used in restoring apps... many are not 4.4.3 compatible like 4.2.2. So some issues will arise with using customizations. I may hold off another year before installing 4.4.3... I don't like being a tester, been doing that for 30 years now, and like the stability of 4.2.2.
gooberdude said:
Hi, I had rooted my 4.2.2 and installed a bunch of root apps... At this time, my Kies says there are no updates available. You will have to wait for 4.4.3 to come out for any update feature to work.
For myself I will do a factory system reset to bring my tablets update apps out of freeze and clear out any cache and the apps that were installed. Once the tablet is booted, I use Kies to push the new firmware once it is released.
Care should be used in restoring apps... many are not 4.4.3 compatible like 4.2.2. So some issues will arise with using customizations. I may hold off another year before installing 4.4.3... I don't like being a tester, been doing that for 30 years now, and like the stability of 4.2.2.
Click to expand...
Click to collapse
Thanks for that reply. So, will putting back to factory system reset take root off too? And restore factory recovery? Thanks again gooberdude.
I have kies set up. And good tip about apps not being compatible with updated platform. I hope to remember that when the time comes!!
sashusmom said:
Thanks for that reply. So, will putting back to factory system reset take root off too? And restore factory recovery? Thanks again gooberdude.
I have kies set up. And good tip about apps not being compatible with updated platform. I hope to remember that when the time comes!!
Click to expand...
Click to collapse
Actually if you are using SuperSU you can do a complete wipe of root... Titanium Backup also has a root remover option. I think both force a reboot when given the ok to wipe. I found by doing the factory reset clears out root and all the apps as well all in one stroke. Though it will take some time while it initializes a fresh copy of the OS.
Rooting does not play with boot loaders, or partitioning. It is just like any common app so to speak but are system files to allow root access permissions with apps. So even if you leave a root alone, a ROM upgrade should overwrite the root files as they are not protected or hard encoded into a partition in any way.
I do believe any full ROM upgrade will remove all system mods. But it is good practice to wipe the old OS settings by doing a factory reset. Kies will do all that is needed for installing a new ROM. As it is designed to do that function in the best manner possible.
For the most part Odin is a tool that requires a certain amount of user input to perform tasks... it is not fully automatic as to clearing and formatting key areas before loading custom firmware. As custom firmwares may load differently than OEM ROMs.
gooberdude said:
Actually if you are using SuperSU you can do a complete wipe of root... Titanium Backup also has a root remover option. I think both force a reboot when given the ok to wipe. I found by doing the factory reset clears out root and all the apps as well all in one stroke. Though it will take some time while it initializes a fresh copy of the OS.
Rooting does not play with boot loaders, or partitioning. It is just like any common app so to speak but are system files to allow root access permissions with apps. So even if you leave a root alone, a ROM upgrade should overwrite the root files as they are not protected or hard encoded into a partition in any way.
I do believe any full ROM upgrade will remove all system mods. But it is good practice to wipe the old OS settings by doing a factory reset. Kies will do all that is needed for installing a new ROM. As it is designed to do that function in the best manner possible.
For the most part Odin is a tool that requires a certain amount of user input to perform tasks... it is not fully automatic as to clearing and formatting key areas before loading custom firmware. As custom firmwares may load differently than OEM ROMs.
Click to expand...
Click to collapse
That's what I thought too. I am surprised that OTA says I have altered the OS, so I can't do OTA upgrade. The only thing I think I have done is root. I just can't remember 3 months ago if I tweaked it any other way.
I have used ODIN- mostly when I got this tablet back in November. Had to learn how to use it, but it was fine. I always read 3 times, and do things correctly Sort of like measure twice, cut once:silly: Most likely will odin back to stock when the time comes. More work, more brain power required
sashusmom said:
That's what I thought too. I am surprised that OTA says I have altered the OS, so I can't do OTA upgrade. The only thing I think I have done is root. I just can't remember 3 months ago if I tweaked it any other way.
I have used ODIN- mostly when I got this tablet back in November. Had to learn how to use it, but it was fine. I always read 3 times, and do things correctly Sort of like measure twice, cut once:silly: Most likely will odin back to stock when the time comes. More work, more brain power required
Click to expand...
Click to collapse
I re-read your original post... you said you installed a custom recovery. The only way to get your OTA back is to do a factory root load. There was one to download somewhere on a rooting thread, or on a custom recovery thread.
If you do perform the custom recovery removal, you may also have to run triangle away to clear out the counters and reset to zero.
Since I had a full custom setup before reverting back to OEM, I had everything done in order. Triangle away running to clear counter, custom recovery and SuperSu.
Before I started with Odin to load my factory ROM, I first removed root with SuperSU, as Triangle Away was properly setup to perform the clear counter. Once I removed SuperSU and rebooted. I then ran Triangle Away and had it reset to boot to stock recovery uploader. Then used Odin to perform the factory ROM install.
=================
Now since you are probably jumping around... I would try seeing if your custom recovery is still intact. Try to boot into your custom recovery, an if so clear all cache and userdata and format your partition, and load the factory ROM from SD. It may perform all the actions for your OEM ROM to be detected properly.
If you by chance have cleared out the custom recovery, then it is a matter of installing Triangle away, and performing the reset of counters. Once done and rebooted, Kies should show your device's ROM info without any issues from your previous customizations.
gooberdude said:
I re-read your original post... you said you installed a custom recovery. The only way to get your OTA back is to do a factory root load. There was one to download somewhere on a rooting thread, or on a custom recovery thread.
If you do perform the custom recovery removal, you may also have to run triangle away to clear out the counters and reset to zero.
Since I had a full custom setup before reverting back to OEM, I had everything done in order. Triangle away running to clear counter, custom recovery and SuperSu.
Before I started with Odin to load my factory ROM, I first removed root with SuperSU, as Triangle Away was properly setup to perform the clear counter. Once I removed SuperSU and rebooted. I then ran Triangle Away and had it reset to boot to stock recovery uploader. Then used Odin to perform the factory ROM install.
=================
Now since you are probably jumping around... I would try seeing if your custom recovery is still intact. Try to boot into your custom recovery, an if so clear all cache and userdata and format your partition, and load the factory ROM from SD. It may perform all the actions for your OEM ROM to be detected properly.
If you by chance have cleared out the custom recovery, then it is a matter of installing Triangle away, and performing the reset of counters. Once done and rebooted, Kies should show your device's ROM info without any issues from your previous customizations.
Click to expand...
Click to collapse
Great info! Thank you Gooberdude! And I don't Jump .LOL. I just take it one step at a time....Smoothe, then if things are screwed up, I jump around!!! And call out for help!!! And duh- I forgot custom recovery is a problem.
I think I have access to both recoveries. Is that possible? I think I can get into the stock recovery by holding down the correct buttons sequence, but can get into Philz by using my cheat app that I really love, Flapps PowerTool. I'll review what I have and how to do the button sequence to pull up stock recovery and post back.
Thank you for the detailed instructions...Appreciate it. It will probably be awhile before kit kat is put out for our Note 8's anyway.
*********************************************************
Nope. Just Philz custom.
sashusmom said:
Hello guys. I got my Note 8 at the holidays, I used OTA to get the 4.2.2 update, and I used autoroot, and just checked my recovery and I have Philz touch 5 installed.
When I check for OTA updates, I find the message your device has been modified, no updates available.
I am running stock 4.2.2. Do I need to unroot and return to stock recovery for OTA updates? I did not remove any apps or freeze anything. The only difference is recovery and being rooted. This question is in anticipation of the release of 4.4 kitkat, slated to be pushed to our device- but I'm not holding my breath for when that will be.
Thanks for your input!
Click to expand...
Click to collapse
Here ya go http://forum.xda-developers.com/showthread.php?p=50156744
Sent from my SM-N900V using Tapatalk
So im on 4.4.2 right now with twrp and timur's kernel FI 2013 installed on the tablet. I keep getting an update message, and it will download 4.4.3 and restart, but it restarts into twrp, which is why, I'm guessing, the update doesn't install. What would be a good solution to updating the tablet to 4.4.3, or.4 if it is available? thanx.
[email protected] said:
So im on 4.4.2 right now with twrp and timur's kernel FI 2013 installed on the tablet. I keep getting an update message, and it will download 4.4.3 and restart, but it restarts into twrp, which is why, I'm guessing, the update doesn't install. What would be a good solution to updating the tablet to 4.4.3, or.4 if it is available? thanx.
Click to expand...
Click to collapse
Assuming you haven't modified any /system files the ota wants to update, the next time the update boots you into twrp, it will not automatically install, you must flash the ota manually, you will find the ota zip in /cache...you will have to flash the stock kernel before doing anything though...and if you get an error about a modified file in /system, you will have to revert the change or dirty flash the stock system.img...wipe dalvik though...after flashing the ota wipe dalvik and cache.
mdamaged said:
Assuming you haven't modified any /system files the ota wants to update, the next time the update boots you into twrp, it will not automatically install, you must flash the ota manually, you will find the ota zip in /cache...you will have to flash the stock kernel before doing anything though...and if you get an error about a modified file in /system, you will have to revert the change or dirty flash the stock system.img...wipe dalvik though...after flashing the ota wipe dalvik and cache.
Click to expand...
Click to collapse
If I flash the stock kernel wouldnt that get rid of timurs that I have now. That kernel is the only reason I have this thing. Just correct me if im wrong but your saying flash back to stock, install updatesthen reflash timurs? Why cant I just try and find a clean 4.4.4 zip which I have looked for but never found, and flash it through twrp instead of relying on the nexus' s self update. I looked in the destination u gave me and it wasnt there. Could this be because /cache is a temporary storage location and I have to do this immediately after the download
[email protected] said:
If I flash the stock kernel wouldnt that get rid of timurs that I have now. That kernel is the only reason I have this thing. Just correct me if im wrong but your saying flash back to stock, install updatesthen reflash timurs? Why cant I just try and find a clean 4.4.4 zip which I have looked for but never found, and flash it through twrp instead of relying on the nexus' s self update. I looked in the destination u gave me and it wasnt there. Could this be because /cache is a temporary storage location and I have to do this immediately after the download
Click to expand...
Click to collapse
There are multiple ways to update, you asked about OTA, in order for OTA to work, the OTA expects the device to have certain files at a certain version, one of the things it checks, besides files in /system, when there is a change to it, is the kernel, so a OTA will fail if it checks the kernel and finds timur's in its place, which is why I suggested you just flash the stock boot and system (yes, you can always go back to timur's afterward assuming it is compatible with the new ROM, you will also have to reroot/redo changes to /system).
The OTA is downloaded into /cache, and if the cache is wiped the OTA file will not be there, so once it is downloaded, use a root filemanager, and copy it to your sdcard, then it won't get wiped.
The other way to update is to just flash the changed images individually from the factory images using fastboot, making sure not to flash the images which would wipe any boot, userdata, or custom recoveries...as long as you do not flash boot.img, you will keep timur's kernel, but you will have to reroot/redo changes to /system.
You can also use the factory image flash-all.bat to do this, BUT you must delete the -w option in the bat file, not doing so will result in your device being wiped, you will still have to reflash timur's kernel using this method as well as reroot/redo changes to /system.
Either way, when you update, wipe dalvik and cache before rebooting.
Just from the way you described that to me i can tell that its going to take some time for me to relearn how to do all of this. Are there really any huge benefits to updating from 4.4.2 to .4 that would really make this worth it? Also if I did decide to put all of this effort into it, is there a way that i can save things like my preferences and my homescreen setup and widgets when i do attempt it? thanks
[email protected] said:
Just from the way you described that to me i can tell that its going to take some time for me to relearn how to do all of this. Are there really any huge benefits to updating from 4.4.2 to .4 that would really make this worth it? Also if I did decide to put all of this effort into it, is there a way that i can save things like my preferences and my homescreen setup and widgets when i do attempt it? thanks
Click to expand...
Click to collapse
Yeah, you can use TiB to backup apps and appdata. I would also advise you do a full nandroid (no need to backup cache though). Save them all to your PC.
As for whether it's worth it, you'll have to read the changelogs for yourself and find out if it is to you or not. Really it's not much work at all to update.
You can always wait around for Android L.
I rooted using PurpleDrake...
That said my questions are:
If I restore the Stock boot.img & Stock recovery.img then perform a *full Unroot in SuperSU can I install the OTA without issue?
How about system files... Does PurpleDrake change them in any way that could cause the OTA to fail even after reverting back to stock boot, stock recovery and Un-rooting?
* not positive this step is necessary or will even work?
TIA to anyone with input!
AndroidUzer said:
I rooted using PurpleDrake...
That said my questions are:
If I restore the Stock boot.img & Stock recovery.img then perform a *full Unroot in SuperSU can I install the OTA without issue?
How about system files... Does PurpleDrake change them in any way that could cause the OTA to fail even after reverting back to stock boot, stock recovery and Un-rooting?
* not positive this step is necessary or will even work?
TIA to anyone with input!
Click to expand...
Click to collapse
Wondering same thing. How to get update, the reroot without having to do a full return to stock first.
Try it and let us know. As long as you don't have twrp installed you won't bootloop. If it does get hung up at all just battery pull and boot normally. At worst it won't take and you'll stay on c.
It worked!
Swizzle82 said:
Try it and let us know. As long as you don't have twrp installed you won't bootloop. If it does get hung up at all just battery pull and boot normally. At worst it won't take and you'll stay on c.
Click to expand...
Click to collapse
Here's the steps that worked for me, your mileage may vary.
Made sure all factory apps were present and or defrosted.
Restored the factory recovery and factory boot image (thanks autoprime) with Flashify.
Then I restored "b1847cae892006ffa11c6822a408fe8528142a54.D85110c_00-D85110m_00_update.zip" to the Cache folder.
Re-Enabled OTA using dialer code for hidden menu.
Opened Settings > About phone > Update Center > System updates and was met with the Android System Update screen showing the update "Downloaded and verified 154.6MB", hit the "Restart & install" button and it rebooted to factory recovery installed the update without issue.
No data was lost, No reflashing factory "c" image wiping all your data and having to upgrade from there.
I did lose root but it took <2 minutes to get it back.
I know I could have waited for a TWRP update zip but I ran out of patience.
AndroidUzer said:
Here's the steps that worked for me, your mileage may vary.
Made sure all factory apps were present and or defrosted.
Restored the factory recovery and factory boot image (thanks autoprime) with Flashify.
Then I restored "b1847cae892006ffa11c6822a408fe8528142a54.D85110c_00-D85110m_00_update.zip" to the Cache folder.
Re-Enabled OTA using dialer code for hidden menu.
Opened Settings > About phone > Update Center > System updates and was met with the Android System Update screen showing the update "Downloaded and verified 154.6MB", hit the "Restart & install" button and it rebooted to factory recovery installed the update without issue.
No data was lost, No reflashing factory "c" image wiping all your data and having to upgrade from there.
I did lose root but it took <2 minutes to get it back.
I know I could have waited for a TWRP update zip but I ran out of patience.
Click to expand...
Click to collapse
Hey, I've been searching through the forums trying to find the stock recovery/boot images for the last hour to no avail. Would it be possible for you to post links to where you found them? Thanks!
EDIT: Annnnnnnnnnd of course as soon as I ask, I find it in another thread I was reading http://forum.xda-developers.com/showpost.php?p=55359856&postcount=125
Where can i found the stock boot.image and stock recovery.img
bjg020683 said:
Where can i found the stock boot.image and stock recovery.img
Click to expand...
Click to collapse
Link in post just above yours...
Thanks
Hi, I think I follow all of your steps except confused about this one:
"Then I restored "b1847cae892006ffa11c6822a408fe8528142a54.D85110c_ 00-D85110m_00_update.zip" to the Cache folder."
Can someone explain what the above means? Thanks!
laoh said:
Hi, I think I follow all of your steps except confused about this one:
"Then I restored "b1847cae892006ffa11c6822a408fe8528142a54.D85110c_ 00-D85110m_00_update.zip" to the Cache folder."
Can someone explain what the above means? Thanks!
Click to expand...
Click to collapse
That is the actual "m" build OTA update zip file. Why not go straight to "r"?
The only reason I had to restore it was because I had deleted it in the 1st place.
Check your Cache folder for any update zip that may be waiting already.
I did it this way only because I was too impatient to wait for the update zips to be posted here.
But now they exist...
Here is a better way:
If you are already rooted go Here > http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667 and follow the TWRP instruction for flashing KK builds D85110 C, M, R Untouched_Stock_Restore.zip or even Lollipop D85120B
This will allow you to go straight to "r" skipping "m" all together.
If you are feeling brave and competent you could go straight to Lollipop...
Be sure to also flash SuperSu and TWRP after flashing the restore zip and before rebooting or you will lose root and your custom recovery.
Good luck!
AndroidUzer said:
That is the actual "m" build OTA update zip file. Why not go straight to "r"?
The only reason I had to restore it was because I had deleted it in the 1st place.
Check your Cache folder for any update zip that may be waiting already.
I did it this way only because I was too impatient to wait for the update zips to be posted here.
But now they exist...
Here is a better way:
If you are already rooted go Here > http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667 and follow the TWRP instruction for flashing KK builds D85110 C, M, R Untouched_Stock_Restore.zip or even Lollipop D85120B
This will allow you to go straight to "r" skipping "m" all together.
If you are feeling brave and competent you could go straight to Lollipop...
Be sure to also flash SuperSu and TWRP after flashing the restore zip and before rebooting or you will lose root and your custom recovery.
Good luck!
Click to expand...
Click to collapse
Thanks for the lengthy explanation. Can I verify if what I'm trying to do is same as what you've done? Here's my situation.
- I have the stock LG 4.4.2 KK rom for D851. Not stock AOSP or CM or any other "custom ROM".
- It is rooted and have TWRP
- The only thing I've really done to the rom is to debloat - used Titanium to freeze lots of apps that came with the LG rom. I have not deleted any since I've read before that if you delete them, it will make it a pain to upgrade to newer Android versions.
So I've learned the hard way trying to update my phone from 4.4.2 to 5.0.1 LG rom.
- I took the OTA and tried to install it. Big mistake. I ended up in a TWRP bootloop. Had me cringing thinking I just lost everything until I found this post http://forum.xda-developers.com/lg-g3/development/fix-stuck-custom-recovery-trying-ota-t2907508 and fixed it with LG_G3_Flash2FixStuckRecovery.zip (flashed it with TWRP). What a godsend it was. Got me out of bootloop and I didn't have to do factory reset or anything. All my apps and data are intact just the way it was before I began OTA.
- So now I'm back to where I started originally before attempting to OTA to Lollipop.
If I'm reading correctly, what I need to do are:
- Unfreeze all apps
- Restore stock recovery (recovery.img) and boot file (boot.img) - this essentially reverses root and custom recovery. Use Flashify to do so.
- Flash the stock LG Lollipop update (btw - the phone says that the new ROM is already downloaded and ready to go but there's nothing in the cache folder... is there somewhere else I should be looking?)
- Before I reboot - I should flash SuperSU and TWRP which restores root and custom recovery
- Reboot phone, cross fingers.
Somewhere in the middle, am I reading that you need to restore LG stock Kitkat rom first (which I already am on), then update to Lollipop? I'm reading that from this part "This will allow you to go straight to "r" skipping "m" all together. If you are feeling brave and competent you could go straight to Lollipop..."
I'm confused here...
One last thing - Once I'm upgradded to Lollipop, is there an easy way to freeze all the apps I had frozen before instead of going one by one? I have the paid Titanium version but I can't figure out if it has a batch/mass freeze feature.
Thanks!!
No, sorry but you are way off base. I think you either did not read my post carefully or you totally misunderstood what I was trying to say.
You don't have to do the steps I did, they are not necessary with the files available at the linked post below.
Yes you can go straight to lollipop but for someone like yourself I would reccomend downloading and flashing KK build "r"
If you are already rooted go Here > http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667 and READ THE ENTIRE OP CAREFULLY then follow the TWRP Files/flashing guide for flashing KK build D85110R-Untouched_Stock_Restore.zip
*Be sure to also flash SuperSu and TWRP after flashing the restore zip and before rebooting or you will lose root and your custom recovery.
This will at least update you to the last build "r" of Kit Kat
Lollipop for the D851 still has some bugs to be worked out but you can flash it if you want.
You are on your own now...
Good luck!
AndroidUzer said:
No, sorry but you are way off base. I think you either did not read my post carefully or you totally misunderstood what I was trying to say.
You don't have to do the steps I did, they are not necessary with the files available at the linked post below.
Yes you can go straight to lollipop but for someone like yourself I would reccomend downloading and flashing KK build "r"
If you are already rooted go Here > http://forum.xda-developers.com/tmobile-lg-g3/general/firmware-t-mobile-lg-g3-t2818667 and READ THE ENTIRE OP CAREFULLY then follow the TWRP Files/flashing guide for flashing KK build D85110R-Untouched_Stock_Restore.zip
*Be sure to also flash SuperSu and TWRP after flashing the restore zip and before rebooting or you will lose root and your custom recovery.
This will at least update you to the last build "r" of Kit Kat
Lollipop for the D851 still has some bugs to be worked out but you can flash it if you want.
You are on your own now...
Good luck!
Click to expand...
Click to collapse
I appreciate all of your advice. The thing is, I'm trying to upgrade to Lollipop... I'm already on Kitkat and not really interested in upgrading to a latter dot version of Kitkat.... It just seems like a difficult proposition to do OTA upgrade if you rooted and have non-stock recovery. Since I'm on tmobile d851 stock Kitkat (rooted with frozen apps), I should've never put put TWRP. I thought I might put custom ROM on it but never got around to it and since you pretty much lose wifi calling with non-Tmobile ROMs, I just never did... More of a pain now....
I have a Nexus 7 (2013) running Kit Kat (4.4.4) and recently got the the OTA update to 5.0.1, but haven't installed it yet. I rooted it using the WugFresh Nexus Root Toolkit sometime some the last OTA update.
So how do I update to Lollipop? Do I need to unroot with the toolkit first? Will I need to backup my apps first and restore after the update?
Also, for some unknown reason, I no longer have the OTA update although I was notified that it had been downloaded. Odd! Guess I'll have to manually download it and side load it.
Thanks in advance...
skallal said:
I have a Nexus 7 (2013) running Kit Kat (4.4.4) and recently got the the OTA update to 5.0.1, but haven't installed it yet. I rooted it using the WugFresh Nexus Root Toolkit sometime some the last OTA update.
So how do I update to Lollipop? Do I need to unroot with the toolkit first? Will I need to backup my apps first and restore after the update?
Also, for some unknown reason, I no longer have the OTA update although I was notified that it had been downloaded. Odd! Guess I'll have to manually download it and side load it.
Thanks in advance...
Click to expand...
Click to collapse
In order to run the stock OTA you need to put your system back to stock. That means stock recovery, remove ALL modifications to the system partition (root, ad blocks, etc...) then you can run it. If that sounds like too much work - just back up and flash the factory image then restore.
I was rooted with the Wugfresh toolkit. I downloaded the 5.0 (and later 5.0.1) factory image from Motorola and unpacked it. I edited the flash-all.bat batch file (right click, Edit -or- right click, Open With, select notepad/wordpad) and removed the -w flag from the end of the file. It's not the very end, but very close. Just delete the -w and any excess spaces and save the file. The -w flag is what tells it to do a wipe of all data, removing it will prevent that. Put your Nexus into bootloader mode and double click the batch file.
Once it finishes flashing, it will boot up and say "optimizing apps" or "Android is updating" or something like that. Mine took about 15 minutes. After that, run the Chainfire Auto Root (CFAR) script to get root access back, and you're back in business.
Note: flashing Factory Images and running CFAR require an unlocked bootloader. CFAR will unlock the bootloader AUTOMATICALLY as part of the script. This WILL RESULT IN A LOSS OF DATA. If you are already unlocked, you're fine, as long as you remove the -w flag from the batch file.
Also, you do not need to go from 4.4.4 to 5.0 to 5.0.1, you can jump straight from 4.4.4 to 5.0.1.
There is also this:
http://forum.xda-developers.com/nex.../rom-factory-stock-rooted-rom-lrx22c-t2960745
At least a few of us have used that with no issues. I was running stock rooted 4.4.4 with TWRP, so I updated my bootloader, rebooted into recovery, wiped cache and Dalvik (probably not necessary before flashing), flashed the ROM, wiped cache and Dalvik again, and rebooted, and it's working great with no loss of data.
Telyx said:
There is also this:
http://forum.xda-developers.com/nex.../rom-factory-stock-rooted-rom-lrx22c-t2960745
At least a few of us have used that with no issues. I was running stock rooted 4.4.4 with TWRP, so I updated my bootloader, rebooted into recovery, wiped cache and Dalvik (probably not necessary before flashing), flashed the ROM, wiped cache and Dalvik again, and rebooted, and it's working great with no loss of data.
Click to expand...
Click to collapse
^I am going to do this, after reading similar reports of success.
However, to OP I want to stress that it is important that you update your bootloader before flashing the ROM. The patch is attached to the linked post.
While I am definitely tech savvy, I am not that comfortable with the WugFresh toolkit. For example, I just updated it to v1.9.9 and connected my device. While I know I previously unlocked the boot loader and rooted my device, the toolkit itself does NOT tell me if my device is unlocked or rooted.
Is there a tutorial somewhere describing how to update to Lollipop with the WugFresh toolkit? Thanks to @fury683 for the comment about editing the batch file. But I don't know what that means with respect to the toolkit user interface, that is what buttons are clicked in what order. I need a step by step list of instructions before starting.
@OrBy, by flash the stock image, do you mean the 4.4.4 image or the new 5.0.1 image? And how do I flash the image? WugFresh toolkit?
I used the WugFresh toolkit a few months ago, but have forgotten the steps I took. Should have written it down. I'll try to stick with the WugFresh toolkit.
Thanks for all the comments
Factory images and Wugfresh are not used together. Wugfresh is a collection of things while factory images return the device to 100% factory stock out of the box. If you modify the batch file as detailed above, no user data/apps are removed, just the system, recovery, etc partitions.
Factory images are a one click method that has a very similar end result as Wugfresh does to return to stock. I would go with factory images as it is the easiest and most straight forward method. Run batch, confirm, wait about 1-2 minutes, done.
skallal said:
@OrBy, by flash the stock image, do you mean the 4.4.4 image or the new 5.0.1 image? And how do I flash the image? WugFresh toolkit?
Click to expand...
Click to collapse
Well if your hung up on running the OTA then the 4.4.4 but if I were you I would just flash the 5.0.1 and skip the who OTA.
I managed to update to 5.0.1 without wiping the device using WugFresh. I went to the WugFresh site, read the FAQ, and found how to update without wiping clean. Turns out there is an option to disable wipe without editing the batch file. I was able to do the while procedure leaving the device unlocked.
I did have an unexpected issue. I had to reinstall in the USB drivers on my PC before I could re-root it. WugFresh made this part easy too, though I'm surprised a reinstall was even required. Once that was done, USB connection was restored and I could complete the rooting process.
I always stress out whenever updating Android in any way. The rules are different with each device and OS version.
One change I've noticed I'd that my Nexus 7 brightness I'd dimmer and I have to turn to setting higher. Hope the update is worth the trouble.
Follow up: after all the work upgrading to 5.0.1, I decided I didn't like the new version. I did the upgrade without a clean wipe. But I did the downgrade with a clean wipe.
The WugFresh toolkit is quite capable utility. I couldn't imagine doing it the hard way with the adb command line interface. At least know how to recover and rebuild my system should the need ever occur in the future. And Titanium Backup is indispensable too.
I found Lollipop to be a battery hog. Perhaps I'll try it again when some of the issues are worked out. There is no compelling reason change from Kit Kat at this time, IMHO.
OrBy said:
In order to run the stock OTA you need to put your system back to stock. That means stock recovery, remove ALL modifications to the system partition (root, ad blocks, etc...) then you can run it. If that sounds like too much work - just back up and flash the factory image then restore.
Click to expand...
Click to collapse
This is NOT true. I upgraded while rooted and it went fine. Just beware of xposed and other tools that mess up with /system and thus the upgrade scripts.
While I was able to update from KK (4.4.4) to LP (5.0.1) without wiping the data, it didn't work out for me. The battery life was terrible. It drained at least twice as fast compared to before the update. I was trying to avoid the pain of a clean install. But in the end, it wasn't worth with it.
I ended up going back to KK, and then to LP again but with a clean install. When installing LP the second time, I wiped the data and let Google reinstall all of the apps. There were a small number of apps, that I later restored the data from Titanium Backup, for example games with previous scores.
This made a huge difference in battery life. Plus the look and feel of many apps changed to the new Material design.
I'm not entirely sure I like the look of LP. I'd prefer LP under the hood, but the look of KK. Oh well!
Bottom line: don't do OTA updates with a major new release.
Hi...
I would like to upgrade my phone which has the systemless root.
I tried flashing the current stock recovery to see if OTA goes thru, but it doesn't. (It's a shame, since the OTA is only 11mb and I tend to like conciseness... but oh well.)
Since the OTA didn't go thru, I'd like to flash the upgrade myself - I have downloaded it.
It has the following images - is the following right if I want to upgrade stock ROM, without erasing my data -
radio-bullhead-m8994f-2.6.30.0.68.img - Flash
bootloader-bullhead-bhz10k.img - Flash
userdata.img - Do not flash - Will erase user data.
vendor.img - Flash? - I have Project Fi. Does it matter?
recovery.img - Do not flash - But it's okay if you flash, reflash TWRP.
cache.img - Flash? - Is it same as erasing cache?
boot.img - Flash - And reroot from TWRP.
Edit: There are a couple of threads which are on similar lines, but they are all about some other objective and not specifically on upgrading, e.g. "unroot and rever to stock", etc.
Yes. I usually flash recovery, wipe cache, then flash twrp image, and re-root via TWRP.
https://www.androidpit.com/how-to-get-android-m-preview
You forgot to flash the most important partition: system.
For manually updating to the latest build without losing your data or having to reinstall everything you will pretty much always be able to get away with doing the following:
flash radio, vendor, system and boot.
reflash supersu (and every other module you flashed in twrp)
wipe cache/dalvik
reboot.
Works like a charm and you will not even have to setup anything again. Should take you max 15 minutes total.
I do reccommend starting with a nandroid backup beforehand just in case.
Ya i just updated (flashed) to 6.0.1 myself too last week. Systemless root. And now this 11mb ota happens.
So unroot, revert back to stock recovery, and apply ota update MMB29P?
How do i revert back to stock recovery?
^ one mentions flash recovery....flash recovery, wipe cache, flash twrp recovery, and then reroot.
^one doesnt mention flash recovey....flash radio, flash vendor, flash system, and flash boot?
vypinoy said:
Ya i just updated (flashed) to 6.0.1 myself too last week. Systemless root. And now this 11mb ota happens.
So unroot, revert back to stock recovery, and apply ota update MMB29P?
How do i revert back to stock recovery?
^ one mentions flash recovery....flash recovery, wipe cache, flash twrp recovery, and then reroot.
^one doesnt mention flash recovey....flash radio, flash vendor, flash system, and flash boot?
Click to expand...
Click to collapse
Just follow the steps I mentioned using the files from mmb29p factory image.
It's a method that has proven itself as working. No need messaging with the ota.
If you want to try to force the ota by flashing stock recovery by all means try that.
Keep in mind to check what build you are on and take the stock recovery from the factory image of your current build.
If you installed anything (exposed eg) to system partition the ota still won't work probably.
I'm saying just update from factory image mmb29p instead of ota since your basically will be downloading and extracting a factory image anyway so you won't save much time time by trying to run the ota.
peltus said:
Just follow the steps I mentioned using the files from mmb29p factory image.
It's a method that has proven itself as working. No need messaging with the ota.
If you want to try to force the ota by flashing stock recovery by all means try that.
Keep in mind to check what build you are on and take the stock recovery from the factory image of your current build.
If you installed anything (exposed eg) to system partition the ota still won't work probably.
I'm saying just update from factory image mmb29p instead of ota since your basically will be downloading and extracting a factory image anyway so you won't save much time time by trying to run the ota.
Click to expand...
Click to collapse
ok thanks
hopefully itll work. ill try it soon. I just had to go back to factory when i tried to flash to 6.0.1 from 6.0... and i kept getting the error when flashing system about it could not allocate ***** bytes. and then there was always an error flashing the vendor. so had to flash all the way back to what it was out of box i think. then go to 6.0.1.. only have time on the weekend. ill update then.... i also edited my build.prop... is that gna revert when i update?
vypinoy said:
ok thanks
hopefully itll work. ill try it soon. I just had to go back to factory when i tried to flash to 6.0.1 from 6.0... and i kept getting the error when flashing system about it could not allocate ***** bytes. and then there was always an error flashing the vendor. so had to flash all the way back to what it was out of box i think. then go to 6.0.1.. only have time on the weekend. ill update then.... i also edited my build.prop... is that gna revert when i update?
Click to expand...
Click to collapse
Yep there build.prop is on system. Back that up and restore it later.
It might also keep the ota from executing.
Google Nexus 5 Android 5.1 does come with lots of bug fixes, performance improvements, menu tweaks, and much much more.
pankaj554 said:
Google Nexus 5 Android 5.1 does come with lots of bug fixes, performance improvements, menu tweaks, and much much more.
Click to expand...
Click to collapse
think you posted in the wrong forum, this is the 5X forum not the 5. Also, 5.1 is old...
peltus said:
Yep there build.prop is on system. Back that up and restore it later.
It might also keep the ota from executing.
Click to expand...
Click to collapse
Got that "could not allocate ____bytes" error again when trying to flash system again. So just did it thru wugfreshs advanced utilities.
Other than that. It worked. Twrp was still there too. Which was weird. Installed SuperSU. And back and running again. Thanks!