I'd launched flashtool.exe and it came out with windows 7 permission, after pressing yes it comes out NOTHING.
I'm using the latest version of flashtool and I've been reinstall for many times...
Installed the latest Java still nothing happened
Having a half bricked zl here, help me pls?
Sorry for my bad English
Related
Hi, i didn't know where to post so i just posted this here since i saw other huawei posts in here. (Moderators pls move if misplaced).
I've got a big problem!
I have got a Rooted Huawei Y300 and i've unofficially unlocked the bootloader with DC-Unlocker successfully, and have CWM Recovery installed!
Now here's the deal, i've downloaded Cyanogenmod 11 (4.4) but after i tried to install it, it stopped halfway with "set_metadata_recursive: some changes failed E:Error in /sdcard/name_of_rom_here" (Status 7).
I tried other CM's getting the same error.
Than i tried to reflash to original firmware (V100R001C00B175) from the huawei website, but since i bricked my phone i cannot move the "dload" folder to internal storage so i tried to place it on my sd-card and booting up using Vol- & Power, the upgrade stops at step 2/2 saying it failed.
I'm very sorry not having a backup of the original firmware before i tried CM out (a very stupid and hasty move).
Does anyone have a solution? The phone is just a week old and i've never bricked a phone before (all my old handsets from samsung's to sony's / htc's) and never failed installing a rom or anything related.
Frankly i never suspected CM to fail flashing since everybody else is succesfull ;-/
kind regards,
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
bricked huawei y300
JMailuhu said:
Ok here's a update. I managed to install AOKP (4.3.1) so i atleast revived my phone. I'm guessing it was something with CM11.
Anyway moderators you can delete this thread, since i found the solution myself..
Thanks
Click to expand...
Click to collapse
can you provide instructions on how revive? mine bricked it got stuck on boot logo after succesfully rooting then i installed chainfire 3d but after that when it reboots it got stuck on boot logo plsss help me on this..
please read carefully ..
I have note 2 gt-n7100 when I bought it it was running android 4.1.2 after a few weeks I updated it to 4.3 but I noticed that the download mode screen changed and additional details appeared like knox an warranty void which wasn't apear before but the strange thing is that the old download mode start to appear again when I use kies but it is use less and not download any thing seems like I have 2 download modes but I can't maje any of them default or delete the other altough when I press home and power and volume down the new one always appear.. I rooted my devise using odin and there was no problem then the new update of kitkat 4.4.2 comes to france I couldn't wait then i downloaded it flashing it using odin again and rooted it with no problrm via odin and philz touch .. a few weeks i tried to connect it to odin to downgrade it to 4.3 again but it didn't appear in odin ! i thought that it could be somthing in the new software like they have stoped flash player of working so i thought that they possible avoid using odin or someting like that .. i tried using mobile odin buy chain fire and i flashed 4.3 again but the root permission was lost .. i tried again to connect it with odin but nothing changed at all i tried every possible way to use odin again installing the new drivers required and the latest version of odin and using another pc and cables altough all of them was working with no problem after 4.3 version .. tried every possible one clike root app like framaroot and etc .. tried the adb mode via my pc and it said kernel is patched I updated it to 4.4.2 again via the built in software update and nothing changed .. any way to solve that re root my mobile again !!! .. it seems like a hopeless case :'( help me please and for any additional details I will reply immediately .. thx in advance and sorry for my bad english
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
patrickn2282 said:
Hi there,
i rooted my G3 using Towelroot and all worked fine.
Today i installed the actual Version Xposed Framework and after rebooting it entered a Bootloop.
So i tried to Hard Reset my G3 but when i confirm it the Android with the Gaers show up for a second and then my G3 keeps showing the LG Logo for a few Minutes till i disassamble the Battery.
Next step i try is to flash a firmware in Download mode, but i cant get the Drivers to work... =(
Someone have some hints for me?
Click to expand...
Click to collapse
Have you choosen ART modality?
If i would say "what the hell is that" ... would u slap me?
No.. i dont have chosen that..
Bigger problem is that i dont get any usb driver working for firmware update in Download mode.. =(
OK... i managed to get the drivers working.
But further Problem ist now that im not able to flash anything on my device...
Neither the TOT Method, nor updating with the Original LG Support Tool is working...
Support Tool tells me my Model Number and that my Version is most actual.
If i update anyway it stucks at 4% and tell me it cant connect.
TOT Tool tells me that my Version Number is not correct... but it is..
With the KDZ Update Tool it stucks at 4% like the Original method.
Same problem here
Any one can help us?
Solution
Hi there,
the Problem was my PC...
I was on a Windows 8.1 64bit.
Switched to a Win7-PC and all is working fine.
You should try to use the Original LG cable, or another "Original" Cable and connect it to a USB-Port on the Back of your PC (directly to the Mainboard)
On a blank Win 7:
- I installed the LG PC Suite
- Updated the PC Suite
- Connected my LG in Download Mode
- Let the PC install all drivers,
- Disconnected the Phone
- Downloaded the actual LG Mobile Support Tool
- Let the Support tool do the work
After this i got my first OTA Update and its working like a charme
Guys,
I´ve made a mistake when i flashing @mistercheese 7.0 Nougat Rom, i´ve flashed Mr. Bump before flash supersu, then i lost access to TWRP, the phone give me a black flashing screen and don´t enter the TWRP.
I´ve read and tried many tutorials for root or install TWRP by fastboot but pc don´t recognize my G3 as ADB device, i´ve tried 3 differents pc´s.
Someone have ideas?
PS: Sorry for my bad english, i´m from Brazil
https://m.youtube.com/watch?v=x-cTpsDLNF8
@mistercheese thats don't work for me, i have same black flashing screen with Android robot and red x icon aftet do this procedure.
The screen blinks too fast and i can't read the error message...
I have the same problem. No possibility to flash root from within Nougat ROM and computers not recognizing the phone correctly in fastboot mode. So also no possibility to flash TWRP again via Fastboot.
What to do? Anyone has experiences to go back from Nougat to stock MM via LG Flash Tool?
That would allow me to root again from MM platform with purpledrake or something.
@lal000r have you tested on windows 10 and 8? I've tested only windows 10 and no success on connection on bootloader mode....
I have tested on WIndows 10 and WIndows 7 with no luck on installing the correct driver. Tried different drivers from LG and Universal ADB/Fastboot drivers.
Same for me, well, just sit and wait
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Can anyone please help.
same thing happened to me but no solution
bunny374 said:
same thing happened to me but no solution
Click to expand...
Click to collapse
Now I suspect it is a hardware problem.Probably motherboard has failed.
Same problem here. SP Flash tool flashing successfully but phone won't even boot up
Sarvesh1 said:
My Canvas A1 isn't booting at all (nothing happens when power button is pressed),My phone has been unstable for quite some time now.Initially, I installed MIUI 8 and it crashed after one month or so.Then I installed Stock MM optimized version from XDA and it went well for sometime.Then after a month's period even stock OS crashed.Rebooted and stuck at bootloop.
After that I tried reinstalling the same OS but it always stuck at bootloop.
Hence,I went with SP Flashtool.Tried flashing (Download Only option) Official Lollipop FlashFile available here on XDA,it did flash successfully but phone wouldn't boot.
Next,tried All Format+Download option and again it flashed successfully but now nothing happens not even micromax logo shows up.Hence,I believe I have hard bricked my phone have tried every option that I could think of but to no avail.
I need expert advice on this hence posting it now.
Please Help.
Thanking in advance.
Click to expand...
Click to collapse
Must be problem with your charger use frog charger that worked for me after using different usb cables it happens..