Q&A for [ROM][4.4.2_r2] SlimKat -deb [Stable 5.0 + Weeklies]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.2_r2] SlimKat -deb [Stable 5.0 + Weeklies]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
sms
does it have sms functionality?
After loading n7 lte kitkat-bootloader to run SlimKat Bricked Phone
So my phone has officially died after following the advice to install "n7 lte kitkat-bootloader" onto my s3. My computer now reads it as SMS and won't apply any drivers to it. The screen is black and cannot be started into download mode or back into twrp Not sure what to do. I've been looking for a way to interact with the phone via usb without using adb but without any luck. It is my guess that the "n7 lte kitkat-bootloader" cause a boot failure within the phone. Perhaps there's someone with some advice?
Slim-deb-5.1.1.alpha.0.3-UNOFFICIAL-20150609-2258 and Slim-deb-5.1.1.alpha.0.4-UNOFFICIAL-20150613-0612 not working for me(
Chocoman said:
Slim-deb-5.1.1.alpha.0.3-UNOFFICIAL-20150609-2258 and Slim-deb-5.1.1.alpha.0.4-UNOFFICIAL-20150613-0612 not working for me(
Click to expand...
Click to collapse
Can you elaborate? Both of these worked for me, but it took a few tries flashing it. First few flashes resulted in bootloops. I don't know why it eventually worked; I must have clean flashed three times into bootloops before it finally booted.
groksteady said:
Can you elaborate? Both of these worked for me, but it took a few tries flashing it. First few flashes resulted in bootloops. I don't know why it eventually worked; I must have clean flashed three times into bootloops before it finally booted.
Click to expand...
Click to collapse
Thank you so much. It's work now)
Related
Q&A for [ROM][MK3][4.3][TW]The People's ROM GS3.31 5/18/14
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][MK3][4.3][TW]The People's ROM GS3.31 5/18/14. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Awesome ROM. Used it for over half a year. Thanks!
EDIT: Guess my comment was moved to Q&A..
FancyJesse said:
Awesome ROM. Used it for over half a year. Thanks!
EDIT: Guess my comment was moved to Q&A..
Click to expand...
Click to collapse
It is something new to allow new users with less than 10 posts to ask a question directly in the development thread...but to avoid spam and such it makes a Q&A thread and alerts the developer. I am glad you liked the ROM. I wish I had time to Update it to ND8 or to work on the HTC M8 but at the present I don't.
Old-style installer
It's not your flash card. Look in Phil'z settings for the option to "Don't Allow Old update-binary". Uncheck it. Install the zip. Enjoy the goodness.
2 questions
This is a great rom @Kenny!!Thanks first for all the work you've put into it.
I have 2 questions....I initially installed 3.31 and wiped all including system. Then I factor reset back to stock and flashed 3.17 following the instructions to a T. Now im trying to flash 3.31 and i get the error
format() expects5 args, got 3
E: Error in /storage/sdcasrd1/The PeoplesRomv3.31.zip
(STATUS 7)
ill try the response about checking Phil settings and reply back what happens.
Also since running 3.17 i have been promted to update firmware to 4.3,what i want to know is will this foob anything up as i really like this rom and would hate to start again and have possible issues. if i update will i continue to get update prompts...i was on 4.4.2 before i started this all.
Thanks in Advance
EDIT: Figured it out(looking thru the thread),updated to the latest Philz,reflashed 3.17 rebooted and signed in. Rebooted to recovery flashed 3.31 and all is well(did lose root though,but reflashed SU as well)....really nice rom...:good::good:
Xposed Mods and SuperSU
So forgive me if this has already been answered I did try searching the thread prior to posting and didnt find anything. Nonetheless when I click on the Framework Installer button or the Wanam Mods I get the message " Unfortunately, Wicked ROM Control has stopped" and it essentially force closes. What is it that I need to do to remedy this? Thanks in advance
Q&A for [RECOVERY] TWRP Method for ROOT users
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWRP Method for ROOT users. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
knock on feature loss after twrp install?
RacerBoy said:
Autorec works with ZVE, I just did mine today. I did have the problem with white lines on waking the screen which was fixed by flashing another kernel. Try this thread:
http://forum.xda-developers.com/sprint-g2/general/ls980-zve-ota-zip-update-zvc-zve-t2912488/page18
If you don't already have root stump using their brute force option works with ZVE.
Click to expand...
Click to collapse
I am on zve and still with stock recovery. I have tried to install twrp recovery before and did the white line fix and all was working well until I realized that I lost the knock on feature. does anyone know of a fix for this? I really want to start tweaking the rom but I can do much with out twrp because I don't want to have to keep lg flashing from the start every time I mess it up. my phone is the sprint lg g2 LS980ZVE stock rom currently with 200 app frozen with app quarantine. thanks for any input.
There are newer twrp releases that have a working knock. I just use AutoRec it's a TeamWin Recovery worth it no question. ?
Q&A for [ROM][4.4.X] Paranoid Android for Note 8.0 N5100/N5110 | PEEK - PIE - HOVER
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.X] Paranoid Android for Note 8.0 N5100/N5110 | PEEK - PIE - HOVER. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
b.huss2 said:
Yea full wipe. I even wiped the storage because it's been a while. Loaded the ROM and gapps onto the external and flashed from there. I may re-download both to my internal and re-flash and see what happens. Thanks for the response, it answered my question whether or not these were common.
Click to expand...
Click to collapse
hey mate. did you managed to get it fixed? i had the same problem as well, so its not uncommon to you
For me, on my N5110, boot up takes an excessivley long time (about 2 mins each time). Several times I've had flickering between the home and lock screen. Can't transfer apps to SD, and the ROM just seems overall much slower then others I've tried. I tried/compared it to CM 12.1...... which boots in about 34 seconds. All the issues I mentioned above are not occurring with CM.
Overall I like it, it might just need some wrinkles ironed out.
Rotating 90 degree!
Could you please fix the issue rotating 90 degree when screen is off?
genious91 said:
Could you please fix the issue rotating 90 degree when screen is off?
Click to expand...
Click to collapse
This issue happens to me as well.
Btw, does gravitybox[LP] has an option to use home button to wake up from sleep?
Hi all, I tried the latest version of the rom, and installing supersu, how do I get root back with 5.1 many thanks in advance
Sent from my GT-N5110 using Tapatalk
diazlaz said:
Hi all, I tried the latest version of the rom, and installing supersu, how do I get root back with 5.1 many thanks in advance
Sent from my GT-N5110 using Tapatalk
Click to expand...
Click to collapse
SuperSU v2.49 beta This one worked for me.
Just discovered this Q&A so I will repeat my question here:
How can I get to the recent apps menu?
1. The home button brings me back to the home screen but a long press does not bring the recent apps to show up
2. PIE control is not working. I tried to turn it on by switching to immersive mode but nothing happened. I cleared the preferences in setting --> personal --> Backup & reset -->reset preferences
I'm using the 20150704 build on a N5110
THX
Happened the same - I just downloaded supersu 2.4.6 and installed via twrp. Worked fine.
Q&A for [ROM][5.0 Nightlies][OFFICIAL] Vanir[4.4.4 Stable]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0 Nightlies][OFFICIAL] Vanir[4.4.4 Stable]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
"Unfortunately, Wizard stopped" when I try to install the ROM (TWRP or CWM). I tried everything, every possible wipes. Downloaded other versions of the ROM, but gives the same error and I can not use. Help!
Give it up and try another 5.0.x ROM. From reading this Roms issues its nowhere near stable or worth all your hassle.
joe3681 said:
Give it up and try another 5.0.x ROM. From reading this Roms issues its nowhere near stable or worth all your hassle.
Click to expand...
Click to collapse
Then installed the Bliss Pop and is ok except the battery that seems to drain quickly compared to G3. I think I'll stay in the same G3. Thank U.
Yeah it's not that great yet. I did have quicker than stock drain. Only down side. Hopefully that gets worked out soon
I have the 12/29 build but I can't get the GPS to work. anyone having any luck? that is the primary phone function I need. I tried rolling back to 4.4 but I couldn't get it to work right and had go back to 5...
thanks for your work btw
camera
I really wish like to no if camera is up and running as yet hate to wipe everything
Again if it isn't?
GPS Fix
Does anyone happen to have the l ink to the CM12 gps fix? I read on the Discussion that someone applied it and it fixed GPS location. I, however, have been unable to find a link to download it myself to try.
whatsapp incompitable
flashed it,
everything working fine,
installing apps no problem,
but whatsapp incompitable??
dutch library
hi,
I love the vanir 4.4.4 rom!
And as soon as most of the bugs for 5.0 are gone i will upgrade!
But there is a little thing on the 4.4.4 rom that bothers me,
There is no dutch library in the rom..
So no auto correct and stuff..
Can you please insert it in the next update?
Thank you very much!
Greetings.
sd card mount,
Hello,
Another problem,
Sd card wont mount?
After rebooting and taking battery out it wont change,
Also in recovery mounting sdcard1 nothing changed, help please.
Regard wb
It's unfortunate that this thread has been closed. Also, I am unable to download the 4.4.4 stable Vanir. Can anyone share the 4.4.4 zip? Will greatly appreciate it. Thanks in advance
Q&A for T-Mobile WiFi Calling Fix For INTL Based Roms{TESTING}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for T-Mobile WiFi Calling Fix For INTL Based Roms{TESTING}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thank You!
steal25 said:
So after going crazy all night wondering why its working on my device and not others who have tested, the only thing i can think is that i am using @thicklizard s kernel so i have put together a 3rd zip for testing with it included. I flashed the included kernel with viper and it broke it, then reflashed ThickLizards kernel and again all is working as it should including Wi-Fi Only option.Just flash in recovery the zip below.
I had my phone bricked at the Viper one Logo. I just flashed your 3rd zip file and it came back.
I will update you on whether or not Wifi calling works when it completes booting. Thanks for posting the fix. Really wasnt looking forward to reflashing the rom!
Click to expand...
Click to collapse
mikeosia said:
steal25 said:
So after going crazy all night wondering why its working on my device and not others who have tested, the only thing i can think is that i am using @thicklizard s kernel so i have put together a 3rd zip for testing with it included. I flashed the included kernel with viper and it broke it, then reflashed ThickLizards kernel and again all is working as it should including Wi-Fi Only option.Just flash in recovery the zip below.
I had my phone bricked at the Viper one Logo. I just flashed your 3rd zip file and it came back.
I will update you on whether or not Wifi calling works when it completes booting. Thanks for posting the fix. Really wasnt looking forward to reflashing the rom!
Click to expand...
Click to collapse
Remember roms now take quite a while sometimes before "android is updating" even shows up. Please let me know if this works for you.
Click to expand...
Click to collapse
S-Off Needed for Wi-Fi Calling Fix
Is S-Off needed to install this zip package from TWRP? I have ViperOneM9 3.5.0 and tried to install this zip from TWRP after flashing Viper and the phone freezes on the HTC logo. Is it just that I do not have S-Off or is there something else I am missing? Thanks.