Hi guys,
I'm trying to learn something about Android, GIT and Linux, and best way to do so is getting my hands dirty.
As a Slim user I'm playing a bit with with SlimROMs, and since they dropped support for our device, I'm sharing with you my builds.
FAQs:
SlimLP 5.1:
Q: Is SlimLP stable enough for daily use?
A: If you don't mind the issues reported bellow, yeah, it is.
Q: Can I use another kernel?
A: Yes, of course. Just be sure it includes new PVR drivers.
Q: Are RRO Overlays supported?
A: Yes.
Q: Is F2FS supported?
A: Yes, you can use F2FS as FS for data/ and cache/
Q: Is Xposed working on this ROM?
A: Yes.
SlimKAT:
Q: Is this SlimKAT build different from OFFICIAL?
A: It's just SlimKAT "stock", you will notice no difference between this and official. It's built with Linaro and has some optimizations under the hood.
Q: Is it really faster/smoother?
A: I would say YES, but I can't guarantee over placebo effect, so I will just say that I've got a slightly better average score [~7-8%] in Antutu Benchmarks, for what it's worth. Let me know guys.
Q: Is F2FS supported? A: Nope. You have to use this tool and a kernel that supports F2FS.
Q: Will you...
... update this ROM? A: r2 is already up to date with official.
... publish a changelog? A: Yes. See next post.
... push more tweaks and switch to new PVR? A: I hope so. I would like to say "I will update ALL THE THINGS" but as an engineering student I can't really promise I will.
Q: What kind of optimizations? A:
SlimKAT is built with Linaro 4.8.3 [2014.04]. -O3, LTO, C++11 and strict aliasing are enabled.
Built-in Kernel is compiled with with Linaro 4.9.3 [2014.11] optimized for ARM Cortex-A9. Anyway, it is built from official source and has no enhancement, so I highly recommend you use a custom kernel for better performances and battery life.
Thanks:
Really HUGE thanks to @MWisBest, @Ziyan and to everyone who is working on SlimROMs.
Disclaimer:
Code:
#include
/*
* I am not responsible for bricked devices, dead SD cards, thermonuclear war,
* or the current economic crisis caused by you following these directions.
* YOU are choosing to make these modificiations, and if you point your
* finger at me for messing up your device, I will laugh at you.
*/
Please, make a Nandroid backup of ALL your partitions (system, data, boot, EFS).
These zips work for me, but you know Murphy's law is always ready to strike.
Known issues: If you find more, please, let me know.
SlimLP: [what is NOT working yet - the most are common to all Lollipop (5.0 and 5.1) based ROMs]
There's still a small band on the bottom of recorded videos;
Do you have an issue with your device? Here's How to Report an Issue or a Bug:
Please, before reporting any issues take these few steps. Many of the bugs are NOT caused by the ROM itself.
Are you sure you installed the right Gapps package? If not, flash SlimLP one.
Have you recently installed (or updated) any app or Xposed module? If so, uninstall or disable it.
Disable Xposed.
Are you using stock kernel?
Have you dirty flashed over your previous installation?
5.1 requires a factory reset if coming from 5.0 or older.
Still got the issue? Take a logcat and a dmesg and attach them to your report.
Screenshots are welcome if you think they might help.
Keep in mind that "MY GNEX IS LAGGY!!!" is NOT a useful bug report.
Downloads: Be sure you have read the previous part of the post!
SlimLP Builds [5.1.1]
SlimLP_maguro-5.1.1-BUILD_12-25.zip
GAPPS: use SlimLP official gapps mini package.
Older builds:
SlimLP:
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_9v2.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_9.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_8.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_7v2.zip
SlimLP_maguro-5.0.2-LOLLIPOP_BUILD_7.zip
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD6.zip
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD5.zip
MD5: 2D4D297B4C523F770D529DA6FA267895
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD4.zip
MD5: 15FCC0974A56D3AD281D9EAA1BAEB9D0
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD3.zip
MD5: B12B6865F8C801F453CB015C20E35BCA
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD2.zip
MD5: FE0387E5D2B2C0FB5319076D94801736
SlimLP_maguro-5.0.2-LOLLIPOP_TEST_BUILD1.zip
MD5: CD11529BD4490B7D093D04B458C48EAE
SlimKAT:
slim_maguro-4.4.4-9.0-BETA_v1_UNOFFICIAL.zip
MD5: 4c746a31678c99f9f510c8a41e2dbcbc
slim_maguro-4.4.4-9.0_UNOFFICIAL_r2.zip
MD5: ED3273B360D655CB496D7350B8792397
GAPPS: use SlimKAT official gapps.
XDA:DevDB Information
SlimLP (maguro), ROM for the Samsung Galaxy Nexus
Contributors
theBlackEnd
Source Code: https://github.com/eMarco/
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: SlimLP
Version Information
Status: Beta
Current Beta Version: 0.12
Created 2014-12-22
Last Updated 2015-12-25
Reserved
Changelog:
SlimLP 5.1:
TestBuild 1 >> TestBuild 2
- Some fixes here and there;
- 5.1.1 r3 has been merged
- SlimPIE is back;
TestBuild 2 >> 06/26:
- SlimRecents, Blacklist and Expanded Desktop are back;
- Cursor buttons in navigation bar while typing are back too (Settings -> Navigation);
- Fix to camera crashing while taking videos with WhatsApp\Snapchat\... built in camera app;
- Fix mic mute during call (thanks to @MWisBest);
- Bootanimation is now smooth;
- Synced with SlimROMs repos (alpha 0.4);
06/26 >> 08/07:
- Fixed sound when waking the device through Volume keys;
- Dialer vibration is back (vibrate when call is answered, etc)
- Bump to Beta 0.3 (based on Android 5.1.1 r9);
- Various fixes and translations updates;
08/07 >> 08/11:
- Fix for some apps FC;
08/11 >> 09/13:
- LiveDisplay and ColorCalibration have been fixed;
- Kernel: switch back to Boype's RAM Timings;
- Synced with SlimLP Beta 0.7 (Android 5.1.1 r16);
- Flip to Mute/Reject Call;
- CellularTile: Long-click triggers detail view instead;
- Show icon of the app associated to Toast notification;
- ResolverActivity: reduce elevation to make it flat
- More;
09/13 >> 10/31:
- BFQ IO Scheduler has been added (CFQ is still default though);
- Vibration intensity can be set;
- Synced with SlimLP Beta 0.10 (based on Android 5.1.1 r20);
- New Messaging App;
- Lock Pattern has been improved;
- A few fixes and improvements;
10/31 >> 12/25:
- Synced with SlimLP Beta 0.12 (Android 5.1.1 r30);
- A few fixes and improvements;
SlimKAT:
OFFICIAL >> r1
- built using Linaro 4.7.4 [2014.06-1~dev] (ROM), Linaro 4.9.3 [2014.11] (Kernel);
- Compilation flags: O3, C++11, strict aliasing;
- Minor changes;
r1 >> r2
- ROM is now built with Linaro 4.8.3 [2014.04];
- LTO is now enabled.
- Video playback has been fixed;
- Video recording now should work properly, too;
- Some enhancements to bionic (check my github);
- Minor changes;
SlimLP 5.0:
Initial revision:
- SlimLP on maguro;
- New PVR;
Test Build 1 >> TB 2:
- Toolchains: same as SlimKAT, check first post;
- Built-in kernel (based on @Ziyan's OMAP kernel) is now working;
- Stock camera is now saving pictures (YEEEEEEEEEEEEE!), unless you switch flashlight toggle on in notification drawer. If so, you probably need to reboot and\or clear camera cache in Settings > Apps > Camera;
- Synced up with SlimLP repos;
TB 2 >> TB 3:
- Improvements to the kernel, but you won't notice them unless you like your phone to be dead quiet; :silly:
- Photos should not look yellowish anymore. [NON-PIE support has been enabled (temporarily) to let fRom download camera calibration files];
- Long SMS sending should be fixed; (thanks to @Ziyan)
- Synced up with official repos;
- Minor changes;
TB 3 >> TB 4:
- Audio is now working properly and so is video recording, you won't need an external kernel;
- Kernel is now built with GCC 4.9.3 [12.14] Optimized for Cortex A9;
- Merged lastest MWisBest's changes to camera, I guess it should be a bit more stable now;
TB 4 >> TB 5:
- Torch tile is now working;
- ScreenRecord should be fixed;
- Video playback works fine on stock gallery apps;
TB 5 >> TB 6:
- F2FS support has been added (data and cache);
- New open-source bin to get camera calibration file (thanks to Ziyan), non-PIE support has been disabled;
- Built with SaberMod 4.8.5 [01.15]. C++11, -O3 and strict aliasing have been enabled (thanks to MWisBest);
- Synced up with official repos;
TB 6 >> Build 7:
- Enabled F2FS kernel support;
- Switched from SELinux Permissive to Enforcing (thanks to @freshgiammi);
- Darkened UI a bit (Dark Material) [boot to reduce screen burn-in, notifications, powermenu] (thanks to @ezio84);
- Added RRO Themes support;
- Some Updates to RIL [long text sending fix, ...];
- Brought back some audio changes to the kernel. Following MWisBest, this will allow bsmitty83 to build just one version of his kernel;
- Added pngquant PNG compression to lower ROM zip size;
- Synced up with official, minor changes;
Build 7 >> 7v2
- Built-in Superuser is now working;
- SettingsUI themed Dark Material, too;
- Tuned Low Memory Killer values. Thanks to Ziyan;
Build 7v2 >> 8:
- Workaround for Google Play Services FC. You need to wipe /system before updating;
- Revert Dark Material UI;
- Added full RRO Themes support;
- Minor changes;
Build 8 >> 9:
- Switch from JEMalloc to DLMalloc (memory allocation);
- Built-in ART now includes changes needed by XPosed (*);
- Recents lag fix;
- Some fixes here and there;
- Synced up with SlimROMs repos (improvements, updates to translations\built-in apps, ...);
Build 9 >> 9v2:
- Fix bootloop issues on VYL00M;
9v2 >> 10:
- XPosed updates to ART;
- Revert to old working controller for headset buttons;
- Netflix and other DRM using apps should work fine now; [TBC]
- OpenGL ES 2.0 support has been brought back;
- New Install App interface (more details, comparison between current and new permissions and more);
- Some improvements and fixes here and there (RRO, memory management, ...);
- Switch to new Camera\DOMX [Hashcode's omap4-next];
Reserved
Very smooth and seems to be very stable. Thank you for your ROM. But the scale is very small. How to make bigger ?
I want lollipop. please.
KATAMAPAH said:
Very smooth and seems to be very stable. Thank you for your ROM. But the scale is very small. How to make bigger ?
Click to expand...
Click to collapse
Change dpi. Use "prop editor" to do that
Sent from my Nexus 5 using XDA Free mobile app
Hey guys, I'm uploading r2 right now.
I'm sorry it took so long but I had to fix some bugs and each one required at least one clean build.
I tried to build with SaberMod 4.8.5, I got slightly better performances but had sudden reboots enabling WiFi, so I had to revert to Linaro 4.8.3.
LinkTimeOptimization is now enabled (for real). Video playback is fine, video recording should, too.
Changelog is now available in post #2.
Is Camera App Working
theBlackEnd said:
Hey guys, I'm uploading r2 right now.
I'm sorry it took so long but I had to fix some bugs and each one required at least one clean build.
I tried to build with SaberMod 4.8.5, I got slightly better performances but had sudden reboots enabling WiFi, so I had to revert to Linaro 4.8.3.
LinkTimeOptimization is now enabled (for real). Video playback is fine, video recording should, too.
Changelog is now available in post #2.
Click to expand...
Click to collapse
CM 12 and FML Roms does not have the Camera App working and there is bug in charging the mobile when its offline. Are these bugs fixed in this ROM? Just asking as I do not see any open bugs in the description.
Thanks,
fearlessaryan
fearlessaryan said:
CM 12 and FML Roms does not have the Camera App working and there is bug in charging the mobile when its offline. Are these bugs fixed in this ROM? Just asking as I do not see any open bugs in the description.
Thanks,
fearlessaryan
Click to expand...
Click to collapse
This ROM is still KitKat based and doesn't use new GPU drivers, so yeah, camera and offline charging are working.
CM12 and FML are based on Lollipop instead.
torch
Thank you for this amazing work.
SlimKat 9.0 the final release for kitkat is out, when will you work on it?
please don't forget to add the torch tile in quicksettings.
thanks
Egyoneman said:
Thank you for this amazing work.
SlimKat 9.0 the final release for kitkat is out, when will you work on it?
please don't forget to add the torch tile in quicksettings.
thanks
Click to expand...
Click to collapse
Everything should be already up to date since r2. I'll let you know.
I forgot to re-add torch, my bad. :|
Atm I'm working on Lollipop, I got it booting right now (you see my avatar? well, that's an actual picture of me) using @bsmitty83's FML beta-3 kernel.
The one I'm compiling won't work. I've got several logs, I hope I'll figure out what's wrong with it.
Audio is working fine, data too (on edge, I can't test HSDPA atm as I've got a very weak signal at my home), Camera2 doesn't save any picture, ...
BUT HEY, IT'S SLIMLP ON MAGURO!
Thanks again to @MWisBest, @Ziyan and @freshgiammi.
----- Edit
I heard you like test builds, so I'm uploading this one. I have to study for my exams and I don't think I'll work on it anymore for today.
Is this Rom EXT4 or F2FS or Both??
subabaduba said:
Is this Rom EXT4 or F2FS or Both??
Click to expand...
Click to collapse
Since it is using @bsmitty's kernel.. It supports both ext4 and f2fs
Sent from my AOSP on Galaxy Nexus using XDA Free mobile app
subabaduba said:
Is this Rom EXT4 or F2FS or Both??
Click to expand...
Click to collapse
rajputrajat said:
Since it is using @bsmitty's kernel.. It supports both ext4 and f2fs
Click to expand...
Click to collapse
SlimLP should, but SlimKAT r2 doesn't support F2FS, you have to use poo706's tool. I'll add f2fs support in r3, I think.
Edit:
Errata corrige, I didn't add f2fs support in device tree. You'll have to wait for next builds. However, keep in mind that adding f2fs support is not my priority. I have to get kernel working and try to help with camera.
New build is up.
Changelog:
- Built-in kernel is now working. Overclock is not enabled.
You can use another kernel, of course. Just be sure the one you're going to flash includes new PVR drivers (eg bsmitty83's betas).
- Stock camera is now saving pictures (YEEEEEEEEEEEEE!), unless you switch flashlight toggle on in notification drawer. If so, you probably need to reboot and\or clear camera cache in Settings > Apps > Camera;
- Now using same toolchains as SlimKAT, check first post;
- Synced up with SlimLP repos;
What's not working yet:
- Video recording and video playback.
- Offline charging
- If you boot while in airplane mode you will be prompted to enter your PIN and won't be able to unlock your SIM. You should manage to disable airplane mode before being prompted for it.
- More common to all LP builds and not. If you find more, please, let me know.
Edit: I made a mess with download links, please check you're downloading test build 2.
theBlackEnd said:
New build is up.
Changelog:
- Built-in kernel is now working. Overclock is not enabled.
You can use another kernel, of course. Just be sure the one you're going to flash includes new PVR drivers (eg bsmitty83's betas).
- Stock camera is now saving pictures (YEEEEEEEEEEEEE!), unless you switch flashlight toggle on in notification drawer. If so, you probably need to reboot and\or clear camera cache in Settings > Apps > Camera;
- Now using same toolchains as SlimKAT, check first post;
- Synced up with SlimLP repos;
What's not working yet:
- Video recording and video playback.
- Offline charging
- If you boot while in airplane mode you will be prompted to enter your PIN and won't be able to unlock your SIM. You should manage to disable airplane mode before being prompted for it.
- More common to all LP builds and not. If you find more, please, let me know.
Click to expand...
Click to collapse
Is the camera quality same as the quality in slimkat 4.4.4 camera or it is still yellowish ??
and flashlight thing i dint get it can u explain me again ??
thank u
iddu.daragah said:
Is the camera quality same as the quality in slimkat 4.4.4 camera or it is still yellowish ??
and flashlight thing i dint get it can u explain me again ??
thank u
Click to expand...
Click to collapse
I mean that flashlight toggle in notification drawer (check this gif) is not working and will break camera until reboot.
Flashlight is working in camera.
Some of the photos I took last night look slightly yellowish. I can't really say, I'm going out and I had to restore SlimKAT as I need everything working :/
You're welcome.
theBlackEnd said:
I mean that flashlight toggle in notification drawer (check this gif) is not working and will break camera until reboot.
Flashlight is working in camera.
Some of the photos I took last night look slightly yellowish. I can't really say, I'm going out and I had to restore SlimKAT as I need everything working :/
You're welcome.
Click to expand...
Click to collapse
So is it stable to use as a daily driver or camera will be soon fixed more ??
iddu.daragah said:
So is it stable to use as a daily driver or camera will be soon fixed more ??
Click to expand...
Click to collapse
Actually, these builds are not meant for daily use, but they're stable enough if you don't mind the issues in post #1. Make a full nandroid backup before flashing.
We're trying to get everything working, so yes, camera will get better, of course.
theBlackEnd said:
Actually, these builds are not meant for daily use, but they're stable enough if you don't mind the issues in post #1. Make a full nandroid backup before flashing.
We're trying to get everything working, so yes, camera will get better, of course.
Click to expand...
Click to collapse
No bootanimation ??? I am getting google logo with an unlocked bootloader sign.
Related
Welcome to the EternityProject!
What do we have here?
CM10.2-EPRJ --- Or... EternityProject's CyanogenMod 10.2 build for HTC One X!
Yeah, it's a long time I wanted to make something like that and... I'm proud of this now.
What's the point in using CM10.2-EPRJ?
It contains various optimizations made at compilation time. Moreover, it isn't being compiled with the default Android toolchain, but with a custom one that handles and optimizes the code better.
Is there anything not working?
....Watch at the bugs voice.
Everything is working well, until someone proves that something isn't!
Recommendations:
For achieving the BEST performance on CM10.2-EPRJ, make sure to use our EternityProject Kernel 3.4.37 for HTC One X: I'm developing that ROM always on our kernel and I'll also make this ROM to use the unique features that only our kernel is bringing at the time of writing this (04/08/2012).
Can I use a non-EternityProject Kernel on CM10.2-EPRJ?
For now, it's possible. Absolutely.
Features:
- All the standard CM10.2 Features are enabled
- New, custom toolchain for improved code optimization and better performance
- More to come
EPRJ-SleepLock (LP Lock)
Start by firing up a terminal (Terminal emulator or ADB), then.. here's how to use it:
Activate LP lock: echo "1" /sys/eprjmanager/power_lock
Deactivate LP lock: echo "0" /sys/eprjmanager/power_lock
Changelog:
Code:
20131008:
- CM repos synced
- New EternityProjectOS performance optimizations
- Built with GCC 4.8.x
v0.15
- CM repos synced (29/10/2012, 1.00PM GMT+1)
- OpenGL performance improvements
- libc performance improvements
- skia performance improvements
v0.08
- CM repos synced (31/08/2012, 5.00PM GMT+1)
- libcore performance enhancements
v0.07
- CM repos synced (24/08/2012, 11.00PM GMT+1)
- Call recording is now possible
- WiFi problems gone (along with new kernel)
v0.06
- CM repos synced (18/08/2012, 12.00AM GMT+1)
- Launcher settings now customizable
- USB Mass Storage transfer speedup!
- Camera: solve FC when switching to camcorder mode
- Other speed tweaks
- Some battery tweaks
v0.05
- Proprietary binaries updated to hTC 2.17.401.2
- Introduce experimental USB pendrive automount (for USBHost)
- Solve the crash in Settings -> Storage (remember to flash the latest kernel)
- Solve the inverted-axis problem that was happening in some apps (like camcorder)
- A little faster
v0.04
- CM repos synced (10/08/2012, 11.00AM GMT+1)
- WiFi Wakelock (de)activable!
- Included EternityProject SleepLock (no widget at the moment)
- Performance enhancements
v0.03:
- CM repos synced (06/08/2012, 8:40PM GMT+1)
- User customizable HW buttons!
- User customizable brightness settings (light sensor)
v0.02:
- CM repos synced (05/08/2012, 11:40PM GMT+1)
- skia enhancements (should give less overhead on 2DHW)
v0.01:
- First release.
Screenshots can be found following the download link.
How-To:
1. Copy the CM10.2-EPRJ and GApps packages on your internal memory
2. Flash CM10.2-EPRJ, then flash GApps
3. Make a complete wipe (erase cache and userdata)
4. Flash the kernel package
5. Reboot
6. Enjoy!
If you have WiFi problems, make sure you've flashed the latest EternityProject Kernel for CM10-EPRJ prior complaining!
Do I have to make a full wipe if coming from a previous version of this ROM?
Usually, you only have to wipe your CACHE, unless specified.... but I can't assure you at 100% that you won't have any problem. You shouldn't, but we're living in a world where the only sure thing is that sooner or later we will d.. ehm... understood?
Various:
- Have you got any problem? That's probably because you didn't do a SUPER-UBER-WIPE when coming from CM10/10.1 or Sense.
So, what to download?
You'll find everything here: EternityProject Website
Important: Flash our kernel AFTER flashing the ROM!
Hey, and what about GPL?
Search on my GIT: HERE
Or on our new self-hosted GIT: http://pubgit.eternityproject.eu
Thanks to:
The CyanogenMod Team for the CM base sources!
That said, enjoy!
The EternityProject Team Manager & Main Developer,
--kholk
Awesome, Thanks!
awesome！！！！！！！:good:
Cheers for this, downloading as I type (download seems rather slow though, 40min remaining bu I guess your server may be getting hammered at the moment?)
I'll report back.. thanks again
first page!! Congrats on new rom
No bugs sounds good to me! Right onto it! No need to flash boot.img???
@StomUK
Yeah, it is... and also, the downloadserver isn't that much fast. You should anyway be able to download at 400KB/s with normal load usually....
@KLUVJ
Thanks!
@sottyc
If you've flashed one of the EternityProject Kernels listed on the download page... no, you don't need to flash the boot.img found in the CM ZIP!
sottyc said:
No bugs sounds good to me! Right onto it! No need to flash boot.img???
Click to expand...
Click to collapse
kholk said:
Recommendations:
For achieving the BEST performance on CM10-EPRJ, make sure to use our EternityProject Kernel 3.4 for HTC One X: I'm developing it always using our kernel and I'll also make this ROM to use the unique features (like ION) that only our kernel is bringing at the time of writing this (04/08/2012)
The EternityProject Team Manager & Main Developer,
--kholk
Click to expand...
Click to collapse
If you are already running his latest kernel then I am assuming that you won't need to flash the new boot image, otherwise yes, you will need to do that also (personally I just reflash boot images and roms each time anyway to make sure that they are running as the developer has created them for finding bugs (or hopefully not finding bugs!))
No bugs !No freezes !That to on 3.4 kernel!!Brilliant !This might overshadow the new HTC release!!!
I am alone with no Wifi ?
-JFK- said:
I am alone with no Wifi ?
Click to expand...
Click to collapse
Did u do a superwipe before flashing?
can anyone help me how to flash the kernel in mac?
i typed sh flash_osx.sh in the terminal but it doesn't flash even tho' i get a series of text saying its complete.. but full of errors..
thnx in advance.
I believe if you put some cool screenshots you will have more downloads
and also a feature list is mandatory
sounds nice; unfortunately the additional fixes, which are necessary for being able to build this, aren't given in your sources. device, vendor and kernel tree aren't sufficient for compiling. you can make a list with these fixes pls? *g*
So, if you say there a no bugs...you've fixed all the stuff which is not working on the other CM10 roms?
- Occasional soft-reboots with GPS On + Facebook ( http://forum.xda-developers.com/show...postcount=2184 )
- WiFi direct doesnt work
- MHL output is rotated incorrectly to portrait in horizontal mode (but workaround added since alpha 8 for hw decoded videos/youtube. Use bsplayer from playstore, almost all videos play with it in correct rotation in hwoverlay)
- No FM radio app in ROM. But Spirit FM works from market (it's commercial!)
- USB storage copies slower than normal
- Some paid apps loses settings/acconts due to this android jellybean problem: http://code.google.com/p/android/issues/detail?id=34880 Solution is to backup with Titanium Backup and restore to internal memory, not to sd
- You tell
Click to expand...
Click to collapse
i wonder is multitouch in games that cm10 suffers from fixed
nish77 said:
Did u do a superwipe before flashing?
Click to expand...
Click to collapse
+1 no wifi.Did full wipe before flash...
no wifi too.
yeah~~~a feature list? thank you for the works!
nteeb said:
+1 no wifi.Did full wipe before flash...
Click to expand...
Click to collapse
Probably a Drivers problem, we just have to wait he's working on
CyanogenMod 11
So guys, CMTeam drop CM11 brunch and now working on CM12, so I decided update my ROM to SnapShot M12.
CyanogenMod 11 Final 3.5 - 12.03.2015
Changelog:
Kernel updates: fixed MDP, BUS, QUP, LMK;
Weather in statusbar;
AppCicleBar;
AppSideBar;
Live Volume Steps;
RamBar;
Recents button changer;
Identicons;
Wakelock Blocker;
Rework some Settings;
Stereowinder support;
Recovery are updated;
And other little changes...
Download http://dfiles.ru/files/bqqo5cz0e
Download ODEX version http://dfiles.ru/files/yw4sij0fk
Download Kernel Hotfix: http://dfiles.ru/files/el3etronb
Wipe dalvik-cache before/after flashing.
My firmware and modem - P936-MDM9200B-v10f-OCT-08-2012-XX - http://dfiles.ru/files/2fz360d3e working exelent with my bootloader from GB 2.3
History:
Download Final 3.0 for P930: http://dfiles.ru/files/00rjwc90v
Download Final 3.0 for P930 ODEX version: http://dfiles.ru/files/dvz7vcr8f
Download Final 3.0 for SU640: http://dfiles.ru/files/cnvp20dii
Download Final 2.1: http://dfiles.ru/files/jmcn8pg0a
Download Final 2.0: http://dfiles.ru/files/kont48l50
Download Final 1.0 http://dfiles.ru/files/7n52236n8
Download RC4: http://dfiles.ru/files/hoegxbmp5
Download RC3: http://dfiles.ru/files/7qwqimj51
Download RC2: http://dfiles.ru/files/fy0ebwgyi
Download RC1: http://dfiles.ru/files/7xiu1ypjm
Download RC0: http://dfiles.ru/files/3hfvpucbi
Capability patch for LG SU640 - wifi_patch_su640.zip
P.S. I recommended format System part via recovery by yourself before install ROM.
Recommend make wipe dalvik-cache!
Thanks authors from Slim, Mokee and DirtyUnicorns team for interesting stuff.
Differences between official CM11:
Based on a new kernel 3.4 with all of the modern updates to ION, KGSL, MDP, CPU and other drivers;
Proprietary files from official JB for SU640 and private resources Qcom;
Adreno libs JB_2.5.5.04.02.02.092.059;
No BSOD;
Full hardware support for all audio and video formats (incl. support for 1080p playback );
Camcorder with FullHD;
Search and select a network;
767mb of RAM;
- Added Performance profiles;
- Added Multi-users;
- Added Navigation keys;
- Added Dynamic status bar/navbar;
- Added new List Animations;
- Added Overscrol options;
- Added PIE Control;
- Added option for on/off sound screenshot;
- Added option for on/off animation notification in statusbar;
- Added Double-tap-to-sleep options;
- Added option for on/off 3-point menu;
- Added LastApp menu on quick-key under button;
- Added New RIL class, with more compatibility GB firmware and LTE and SIM stuff;
- Added Traffic network indicator in statusbar;
- Added Softreboot in reboot option;
- Added Battery Bar;
- Added Battery Power Saver option;
- Added dual band WiFi 2.4/5Ghz (not sure if it working, need test, maybe need improve physical antenna);
- L-style navbar button;
- Added some fix and optimisations;
- More stable and flexible.
Stock launcher LG from LG G2 (4.4); - recommend it - super smooth interface!
Google Apps Lite built;
Different stuff from Slim, Mokee, DirtyUnicorns..
Work In Progress
Big thanks Ganster41 for hacking camera libs!
Special Thanks SpGG - Malte Schmidt-Tychsen from Germany for support!
Big thanks all comunity from Slim, Mokee, DirtyUnicorns for inttresting stuff.
Open Source Project - GPL - https://github.com/NitroKK
Tested on my LG Nitro HD - P930 - 630mb System part, old bootloader/modem/firmware from GB 2.3 - P936-MDM9200B-v10f-OCT-08-2012-XX, bootloader 10f or 10i
Screenshots:
Thanx for this!
I hope you will be able to mend the camera problem soon!
Miroslav i love you, thanks for this work.. im thankful for this!
downloading for test now!
Than You
miroslav_mm said:
TEST build CM11
Download: http://dfiles.ru/files/3tm778747
Differences between official CM11:
Based on a new kernel 3.4 with all of the modern updates to ION, KGSL, MDP, and other drivers;
Proprietary files from official JB for SU640 and private resources Qcom;
Adreno libs JB_2.5.5.04.02.02.092.059;
No BSOD;
Full hardware support for all audio and video formats (incl. support for 1080p playback );
Performance profiles;
Multi-users;
Navigation keys (aka Nexus4/5);
Search and select a network;
767mb of RAM;
Stock launcher LG from LG G2 (4.4); - recommend it - super smooth interface!
Google Apps Lite built;
etc.
Bugs:
The camera does not work - problem with compatibility for old camera library on new android versions;
Flashlight does not work as it is related with the camera driver;
Sometimes have reboot, problem with MDP driver, vertical synchronization need to improve.
Work In Progress
Click to expand...
Click to collapse
Thanks for your great work!
I wonder how about battery saving? Looking forward to your good news!
Thanks, very good work.. i hope camera work soon.. because a smartphone without camera.. is not a smarthphone
miroslav_mm said:
TEST build CM11
Download: http://dfiles.ru/files/3tm778747
Differences between official CM11:
Based on a new kernel 3.4 with all of the modern updates to ION, KGSL, MDP, and other drivers;
Proprietary files from official JB for SU640 and private resources Qcom;
Adreno libs JB_2.5.5.04.02.02.092.059;
No BSOD;
Full hardware support for all audio and video formats (incl. support for 1080p playback );
Performance profiles;
Multi-users;
Navigation keys (aka Nexus4/5);
Search and select a network;
767mb of RAM;
Stock launcher LG from LG G2 (4.4); - recommend it - super smooth interface!
Google Apps Lite built;
etc.
Bugs:
The camera does not work - problem with compatibility for old camera library on new android versions;
Flashlight does not work as it is related with the camera driver;
Sometimes have reboot, problem with MDP driver, vertical synchronization need to improve.
Work In Progress
Click to expand...
Click to collapse
Great job！We are looking for your new version
You done a great job!
but can you make this rom for SU640, please?
Sent from my LG-SU640 using Tapatalk 2
I have flashed this rom.. But it locks in bootanimation for a long time and don't continue to gapps settings and nothing.. I had to pull down battery and reflash backup data..
Sent from my LG-P930 using XDA Premium 4 mobile app
Jordamo said:
I have flashed this rom.. But it locks in bootanimation for a long time and don't continue to gapps settings and nothing.. I had to pull down battery and reflash backup data..
Sent from my LG-P930 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Had the same issue with my Nitro....this is how I fixed it. Format system partition FIRST then flash ROM, then format cache, then do a FACTORY RESET (format data). First boot takes almost 10 min so be patient. BTW a battery pull is not necessary. Just hold down power button until it shuts off.
Sent from my LG-D800 using xda app-developers app
Does this kernel work in cm10.1?
Sent from my LG-P930 using XDA Premium 4 mobile app
its coming today...
miroslav_mm said:
its coming today...
Click to expand...
Click to collapse
Thanks!
CyanogenMod 11
Download RC0 - http://dfiles.ru/files/3hfvpucbi
Changelog:
- Global kernel update: ION, DMA, MDP, etc....
- Fix Camera and Camcorder (FullHD working!) - Big thanks Ganster41 for hacking camera libs!
- Latest CM sources.
- Etc.
miroslav_mm said:
http://dfiles.ru/files/3hfvpucbi
Click to expand...
Click to collapse
It was a long day
Is the kernel source available on github ?
thanks
Nz
miroslav_mm said:
http://dfiles.ru/files/3hfvpucbi
Click to expand...
Click to collapse
Thanks. Change log? Is the camera bug gone?
Sent from my LG-P930 using Tapatalk
miroslav_mm said:
http://dfiles.ru/files/3hfvpucbi
Click to expand...
Click to collapse
Hats off to you. Nice job with the camera and the ROM.
After flash and reboot my phone did not get past the cm logo, I noticed a lot of errors in logcat , so I reboot into recovery and formatted cache and rebooted again, them ROM booted
Sent from my LG-P930
notzippy said:
It was a long day
Click to expand...
Click to collapse
With Battlefield 4 you lose control over the time!
Hi,thanks for your great work.but can you upload this file to another site?depostfiles is blocked in my country
Downloading now...will install during the weekend!
Thanx again!
About OmniROM
The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. It’s another option for the billion Android users out there. Android (vs. iOS and every other mobile OS) has thrived on options as well as the gigantic, talented development community that has emerged to build those options. That’s the beauty of Android – that you can pick and choose from a smorgasbord of devices with varying features and functionality.
Omni is a chance to get involved, no matter who you are. Developers, whether you’ve been developing apps for a week, or ROM features for 3 years, you’re welcome. Users, we know you want to help out, and now you can – Omni actively encourages bug reports and feature requests, which can be added to our publicly accessible roadmap. What’s the point in giving you a ROM, and forcing you to not tell us about any bugs you find?
We also recognise how people use Custom ROMs – we’re all custom ROM users and developers ourselves – the argument that “nightlies are not for end users” is over-used, and no longer valid. We’ve found that the vast majority of users want to get nightly updates to their ROM. For that reason, nightlies aren’t a playground – nightlies are for new features that are finished. You should be able to expect the same stability and reliability from a nightly as you would from a “release” ROM, and can report any bugs that prevent this from happening.
We know not everyone wants to update their ROM daily, and you are free to update as frequently or infrequently as you like. Omni is about flexibility and giving users what they expect – and we are excited to see where the community goes with it.
Click to expand...
Click to collapse
Info from omnirom http://omnirom.org/general/android-l-omnirom-progressing/
Disclaimer
Standard disclaimer applies, your warranty is void, this may eat your dog or burn your house down, delete all your pictures, etc.
This is an early stage release so many things are broken since many patches and fixes haven't been imported from old branches yet.
How to install:
Reboot to recovey
A backup is Recommended, you're gonna loose all your data
Wipe data
Flash rom
Flash SuperSU 2.19 2.40 or up just after the rom
http://download.chainfire.eu/supersu -> This is IMPORTANT
Flash Netflix fix if you need it -> Download
Reboot
Around 5 minutes are required for the first boot
Reboot again to recovery
Flash Gapps (See below)
How to update from a previous version:
Reboot to recovey
Flash rom
Flash SuperSU 2.40 or up just after the rom http://download.chainfire.eu/supersu -> This is IMPORTANT (not needed anymore)
Flash Netflix fix if you need it -> Download
Reboot
Gapps download:
Check http://forum.xda-developers.com/android/software/gapps-consolidated-gapps-thread-t3064693
How to report a bug
Use the search function, if the bug has already been reported and I or another person has answered do NOT report it again. I'm tired of writing ten times the same thing.
A bug report function is embedded in XDA forum look at the top there's a section called "Bug Reports". Use it
Provide a logcat and/or dmesg. Search on XDA if you don't know how to get a proper log
Always provide which model you are using and other information that you think could be useful to solve the bug
Downloads:
This is an early preview with lots of bugs and not usable as a daily driver. You have been warned. Flash this only if you are sure about what are you doing.
Download folder: https://www.androidfilehost.com/?w=files&flid=21696
Starting from 20150506 I'm uploading automated builds: this means that they should be treated as nigthlies (I won't create a new one every 24 hours though). All the new files will be placed in the "Download folder" automatically, so, if no new changes from my part, I will NOT update the changelog. These builds will include all the updates and commits from official Omnirom repos plus my commits not yet merged for our tablets. Good luck
Commits: -> Updated to 5.1.1_r2
Necessary commits
In frameworks_native: https://gerrit.omnirom.org/#/c/13068/ and https://gerrit.omnirom.org/#/c/13069/
In frameworks_av: https://gerrit.omnirom.org/#/c/12528/, https://gerrit.omnirom.org/#/c/12529/ and https://gerrit.omnirom.org/#/c/12530/ (in this order)
In kernel_samsung_smdk4412: https://gerrit.omnirom.org/#/c/12223/ (SELINUX to permissive) , https://gerrit.omnirom.org/#/c/13055/ (Kernel compression)
Optional commits:
Enable Stylus pointer toggle: https://gerrit.omnirom.org/#/c/13606/, https://gerrit.omnirom.org/#/c/13650/, https://gerrit.omnirom.org/#/c/13651/
And finally, if you want to test and/or help:
Netflix experimental codecs fix: https://gerrit.omnirom.org/#/c/13716/
Other commits not made by me:
Nothing here as of now
If you wish to have a kernel with overclock and other features, you can find the kernel sources for my custom kernel "mm_alpha" at https://github.com/marco9333/android_kernel_samsung_smdk4412 . See branch mm_alpha_lollipop for the working and updated version working with this rom (and other lollipop roms). I can share a compiled version, PM me if interested
Screenshots -> Click here
Donations:
Many thanks to Heide Ruehle and @Rand_
Thanks to:
Omnirom core devs
@iofthestorm(ported omnirom 4.4 and made it official for our devices)
@humberos (various patches and asked for an official new android-5.0 branch)
@lirokoa (for his advices on wifi and camera hal)
I forgot someone ???
XDA:DevDB Information
OmniROM, ROM for the Samsung Galaxy Note 10.1
Contributors
marco9333
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.0.x
Based On: AOSP
Version Information
Status: Testing
Created 2014-11-23
Last Updated 2016-11-13
Status of things:
Broken:
Charging off mode isn't working
Using torch tile causes a forced reboot, use torch app instead
Wi-fi tethering isn't working
Screen recording causes an hard reboot (Now it just does nothing or System UI crashes and restart)
I haven't tested other things yet....
Report if you found something new to add here
Notes:
Using a proxy in APN settings doesn't work. Thanks to @farinjini for pointing this out -> I don't know if this is working now or not
Changelog:
Older versions changelog
20141123
Initial release
20141125
Fixed stylus (S-PEN input)
Fixed graphical glitches in screenshots and while rotating screen Thanks to @lirokoa
Upstream changes -> updated to android release LRX21V and other "under the hood" changes
20141126 for N801x
Solved bootloop problem, I hope (not booting kernel)
20141130 for N8000
Partially working RIL (this has been really hard )
20141204-05
Upstream changes -> updated to android 5.0.1 LRX22C
Gps fixed. Thanks to @humberos
Added Performance control and Advanced in settings as in omnirom 4.4.4 (thanks to omnirom core devs)
Mobile partially fixed (need to run a script to make it completely work) (only N8000)
20141207 for N8000
Mobile data completely fixed
20141218
Upstream changes
Added advanced reboot (normal reboot, reboot to recovery and reboot to bootloader)
Fixed the problem with keyboard (need to disable physical keyboard from settings)
Fixed forced reboots caused by Youtube and G+
Minor fixes about technical things
20150108
Switched to android 5.0.2_r1 LRX22G
Upstream changes
Random reboots should be fixed -> see https://gerrit.omnirom.org/#/c/11024/ and https://gerrit.omnirom.org/#/c/10997/
20150206
Upstream changes -> See https://gerrit.omnirom.org/
Lots of code cleaning -> Better stability (I hope)
20150326/27
Switched to android 5.1 LMY47D
Upstream changes
20150401
Upstream changes
Switched to android 5.1_r3 LMY47I
Youtube, G+, firefox, etc. reboot fixed (experimental fix please report if problems)
20150407
Upstream changes
Netflix fix (experimental.. please report)
Properly "keyboard not showing" fix
20150506
Upstream changes
Android 5.1.1 LMY47V
New DRM vendor libs (Report if they "work miracles" with netflix)
20150510
Upstream changes
Pointer disabled by default when using S-Pen (Can be re-enabled in Settings see screenshot at #372)
Reintroduced keyboard fix (sorry about that)
20150519
Upstream changes
Android 5.1.1_r2 LMY47X
Netflix codec fix -> See https://gerrit.omnirom.org/#/c/13716/
20150628
Upstream changes
Android 5.1.1_r5 LYZ28E
20150928 or 20150927
Upstream changes
Android LYZ28J
Stagefright fixes
20151104
Upstream changes
Video playing fixed (Sorry guys and girls )
Chrome is now working
You need to enable the showing of keyboard after first boot: go to settings, language and input, current keyboard and enable Hardware(Show input method)
20161110
Untested build
Upstream changes
Android LYZ28N
Reserved
Workarounds and advices
Smoothness: Go to settings, about tablet and press repentantly Build_number until it gives you that you're now a developer, Go back, press on Developer options, scroll down and set Window animation scale, Transition scale and Animator scale to .5x
Toggle stylus (S-pen) arrow pointer:
Go to Settings, Language & input, put a tick or not on "show icon when using stylus" option
marco9333 said:
Status of things:
Working:
Boot
Bluetooth (switching on and scanning)
Rotation
Suspend/Resume (need to keep wifi on though)
Audio
Root (flashing SuperSU from recovery)
Gapps install and start (I've tried CM Gapps but login in is impossible)
Vibration
Hd videoplayback (tested youtube)
I forgot something ???
Partially working:
Screen -> Rotation causes graphics glitches
Video playbackaudio is working, decoders too but black video
Wifi (something wrong with this module, suspending the device with wifi off causes an hot reboot)
Broken:
RIL (phone calls, 3g and so on) for n8000 -> I'll try lirokoa advice -> need to import samsungRIL from android-4.4 tree
Camera (videos) -> Imported opensource camera hal -> taking pictures is fine but video are completely broken
Gps ->I 've waited enough and no position found -> some error regarding this in the logcat
I haven't tested other things yet....
Click to expand...
Click to collapse
Hey marco,
For graphics glitch when rotating you need:
https://github.com/CyanogenMod/andr...mmit/540345f70db4f0cea6ad3f1150d2cb2fac18da25
https://github.com/CyanogenMod/andr...mmit/4e7f61fd6a36345e7994c236d1c128c4c8a6a0ea
https://github.com/CyanogenMod/andr...mmit/db4cec0e189b84e5999ae5b3bef0e7a6c2bb3087
you can probably find those in 4.4 omnirom branch as well.
Then it should be fixed
lirokoa said:
Hey marco,
For graphics glitch when rotating you need:
https://github.com/CyanogenMod/andr...mmit/540345f70db4f0cea6ad3f1150d2cb2fac18da25
https://github.com/CyanogenMod/andr...mmit/4e7f61fd6a36345e7994c236d1c128c4c8a6a0ea
https://github.com/CyanogenMod/andr...mmit/db4cec0e189b84e5999ae5b3bef0e7a6c2bb3087
you can probably find those in 4.4 omnirom branch as well.
Then it should be fixed
Click to expand...
Click to collapse
Thanks I've already merged one of them yesterday (the first), and I need to check the second one. I don't know about the last one because I haven't found any settings in the various configs that enable BOARD_USE_MHEAP_SCREENSHOT. I need to check better though.
marco9333 said:
Thanks I've already merged one of them yesterday (the first), and I need to check the second one. I don't know about the last one because I haven't found any settings in the various configs that enable BOARD_USE_MHEAP_SCREENSHOT. I need to check better though.
Click to expand...
Click to collapse
Yes maybe the one for heap screenshot is not needed.
Sent from my Nexus 4 using XDA Free mobile app
i'll try and see if YT even works
Running N8010 device with N8000 BL
seems imposible to get it to work :silly:
LastStandingDroid said:
i'll try and see if YT even works
Running N8010 device with N8000 BL
seems imposible to get it to work :silly:
Click to expand...
Click to collapse
It's working I've just tested with a 720p video
marco9333 said:
It's working I've just tested with a 720p video
Click to expand...
Click to collapse
i'll see if it'll work for me i've never got it working with any build
LastStandingDroid said:
i'll see if it'll work for me i've never got it working with any build
Click to expand...
Click to collapse
I'm in the same boat as you, stuck with the leaked N8000 bootloader on my N8010, and youtube works great for me on last CM 11 build.
Nice work Marco!!
I've flashed your build (while building mine... ) and I've noticed that the keyboard doesn't show up, I had to go to Settings>Language & input>Current Keyboard and switch on the Hardware flag to make the keyboard appear.
Youtube works fine (audio and video)
I've played a couple of mp4 videos with a default gallery without a problem
Music plays fine with Apollo
It seem very good for such an early build...If only the log in with Google Account worked...:fingers-crossed:
Sooo nice rom only network works on N8000 and it will be my rom
- There is a problem with the default browser as it closes after opening on few seconds
- Graphics errors at multi tasks cards.
TheMorpheus said:
Nice work Marco!!
I've flashed your build (while building mine... ) and I've noticed that the keyboard doesn't show up, I had to go to Settings>Language & input>Current Keyboard and switch on the Hardware flag to make the keyboard appear.
Youtube works fine (audio and video)
I've played a couple of mp4 videos with a default gallery without a problem
Music plays fine with Apollo
It seem very good for such an early build...If only the log in with Google Account worked...:fingers-crossed:
Click to expand...
Click to collapse
I've tried CM gapps but it chrashes on login.... maybe some others google apps will work. I'll try to extract them from my nexus 5 official L rom.
mysarasaid said:
Sooo nice rom only network works on N8000 and it will be my rom
- There is a problem with the default browser as it closes after opening on few seconds
- Graphics errors at multi tasks cards.
Click to expand...
Click to collapse
I usually use chrome. Default browser should be "deprecated" and replaced by chrome. Graphical errors are still there (during switching off screen, rotation, taking screenshots and so on), lirokoa pointed some commits I'll try with them, but they should do the job. RIL is a priority for me too, but it's quite complex and the code changed a lot so I'll need some time to merge that part.
marco9333 said:
I've tried CM gapps but it chrashes on login.... maybe some others google apps will work. I'll try to extract them from my nexus 5 official L rom.
I usually use chrome. Default browser should be "deprecated" and replaced by chrome. Graphical errors are still there (during switching off screen, rotation, taking screenshots and so on), lirokoa pointed some commits I'll try with them, but they should do the job. RIL is a priority for me too, but it's quite complex and the code changed a lot so I'll need some time to merge that part.
Click to expand...
Click to collapse
For RIL, many things are needed and I can't test since I have N8013, but I can point you to some to a repo that might help you:
https://github.com/ArchiDroid/android_frameworks_opt_telephony/commits/cm-12.0
Looks to all SamsungExynos4RIL / Samsung STK commits. That should help.
lirokoa said:
For RIL, many things are needed and I can't test since I have N8013, but I can point you to some to a repo that might help you:
https://github.com/ArchiDroid/android_frameworks_opt_telephony/commits/cm-12.0
Looks to all SamsungExynos4RIL / Samsung STK commits. That should help.
Click to expand...
Click to collapse
I'll give it a try because when I tried to merge RIL from omnirom 4.4 I've got an enormous amount of conflicts. Thanks maybe them will speed up the fix
Sent from my Nexus 5 using XDA Free mobile app
I've tested latest Banks google apps for android L and they are working. This is the link http://fitsnugly.euroskank.com/?rom=banks&device=gapps (added in OP too)
marco9333 said:
I've tested latest Banks google apps for android L and they are working. This is the link http://fitsnugly.euroskank.com/?rom=banks&device=gapps (added in OP too)
Click to expand...
Click to collapse
it did remove my recovery after flashing this rom not sure why i was just unable to reboot to recovery (regular key combination)
used philz recovery rom worked and booted but recovery was gone (also using adb reboot recovery) made my phone go into bootloop
N8010 device with N8000 BL just to mention,
---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------
lirokoa said:
Yes maybe the one for heap screenshot is not needed.
Sent from my Nexus 4 using XDA Free mobile app
Click to expand...
Click to collapse
@llirokoa do u know what lib is patched to fix the graphic issue? is it the surfaceflinger?
LastStandingDroid said:
it did remove my recovery after flashing this rom not sure why i was just unable to reboot to recovery (regular key combination)
used philz recovery rom worked and booted but recovery was gone (also using adb reboot recovery) made my phone go into bootloop
N8010 device with N8000 BL just to mention,
---------- Post added at 10:24 PM ---------- Previous post was at 10:22 PM ----------
@llirokoa do u know what lib is patched to fix the graphic issue? is it the surfaceflinger?
Click to expand...
Click to collapse
I've written quite big in the third post that you need to flash supersu beta just after the rom or you won't be able to boot into recovery: you've been warned. I'm working on merging the fixes for graphics issues.
By the way I've fixed the stylus input which is working ok now. New version soon....
New version 20141125 out
I've just uploaded a new build. See OP for download links and second post for changelog. Before signaling a bug or something that isn't working, please read the third post, too.
Another bug I've found is in charging off script, please recharge your tablet while on until next release
On my n8013, every time I flash the ROM, then gapps, then superSU, I get a boot loop, never makes it to Omni logo. I tried to redownload all files from the OP, and still no luck. Tried 4 times now
THIS PROJECT IS NO LONGER UPDATED, MOVE ALONG!
When I received my Nexus 9 I was immediately missing the real custom rom love for this device.
So as I like to build my on sh*t I decided to roll up my buildmachine and start building. And as I don't like to wait too long for the nice parts of CyanogenMOD to come to the official nightlies (at the moment there are no official nightlies).
So these builds will be pretty pure Stock CM12 builds + some very carefully selected (and tested) cherry-picks from CMs gerrit/code review.
This will not be a rom where features will be added from other ROMs. Features will be strictly CyanogenMOD and will be on their gerrit.
I have personaly tested (runningn currently) this rom on my LTE Nexus 9. So it definately works
FEATURES/Modifications to cm source:
- Kernel doesn't force encryption
- SeLinux has been set to permissive state (atleast for now)
BUGS:
- You tell me!
Click to expand...
Click to collapse
XDA:DevDB Information
[DAILY][UNOFFICIAL][FLOUNDER](WIFI/WIFI+LTE] CM12 builds + Cherry-picks, ROM for the Nexus 9
Contributors
inffy
Source Code: http://github.com/Cyanogenmod
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMOD
Version Information
Status: Nightly
Created 2015-01-26
Last Updated 2015-02-10
DOWNLOAD
downloads
[/size]
Changelogs
CHANGELOGS
(not complete, check http://review.cyanogenmod.org/#/q/status:merged,n,z or http://www.cmxlog.com/12/ for all the merged changes)
5.2.2015:
- Synced CM source up to date
- Enabled 2.0A charging (faster charge time)
- fixes to SetupWizard
- Theme fixes
- Camera can now use power key as a shutter button
- Lockscreen shortcuts can now be disabled
Old Changelogs
4.2.2015
- Synced latest CM source
- Fixes to the new CM SetupWizard
- Theme Engine fixes
- Updates to Trebuchet (CM launcher)
- cherry-pick USB OTG should now be fully working (thanks @gladiac)
- cherry-pick Custom LCD Density
3.2.2015
- Synced latest CM source
- Navring customizations
- Whisperpush lollification
- No forced encryption for /data
- cherry-pick Custom LCD Density
- cherry-pick flounder: USB OTG support
29.1.2015
- Synced CM source
- Kernel set to not force encryption
- Settings : Add screen timeout tile
- cherry-pick Wifi: add option to show quick settings detail view
- cherry-pick Custom LCD Density
27.1.2015
- Synced latest cm source
- SystemUI: Lte -> LTE
- Add 2048x1536 boot animation
- Settings: add AudioFX tile
- cherry-pick Custom LCD Density
- cherry-pick Navring targets customization
- cherry-pick Wifi: add option to show quick settings detail view
26.1.2015
- First public build
- Synced latest cm source
- Theme fixes
- cherry-pick Custom LCD Density
- cherry-pick Navring targets customization
- cherry-pick Wifi: add option to show quick settings detail view
Click to expand...
Click to collapse
Thank you for this.
New build uploaded
CHANGELOG
27.1.2015
- Synced latest cm source
- SystemUI: Lte -> LTE
- Add 2048x1536 boot animation
- Settings: add AudioFX tile
- cherry-pick Custom LCD Density
- cherry-pick Navring targets customization
- cherry-pick Wifi: add option to show quick settings detail view
DOWNLOAD: https://www.androidfilehost.com/?fid=95916177934518012
Awesome
I assume this works with the Wi-Fi only Nexus 9 as well...
Great ROM, been looking for immersive mode ROM for N9 and here it is.
Sent from my Nexus 9 using XDA Free mobile app
EnginEAR said:
I assume this works with the Wi-Fi only Nexus 9 as well...
Click to expand...
Click to collapse
Works on both, wifi and wifi+lte models
What gapps are people using? Would like to try this later today.
mpmilestogo said:
What gapps are people using? Would like to try this later today.
Click to expand...
Click to collapse
Personally with CM I usually go with the PA Gapps (micro package)
I'm running this on my wifi Nexus 9. I used the full PA gapps package.
It's great so far. No issues. I like having the most recent nightly features. The new boot animation is great. Brighter, smiling vs vaguely malevolent.
Hi,
Thanks for this ROM. It's running much more smoothly than stock 5.0.1. However, I have a problem with GPS. I don't get a GPS fix in Google maps.
Do you have GPS working?
Question, does this include the new(er/ish) CM browser based on the AOSP browser? I've been running the official nightlies on my sons Galaxy Tab Pro 8 and it has their new materialish AOSP browser, and it's great, would love to see it on the N9.
Thanks
Dan
@inffy
im gonna take a whack at fixing the APN problem tonight, though i dont have an LTE tablet i do know how to somewhat test if it works, do you mind if i use you as my dummy Test Subject device tester?
EDIT: i think i found out why this doesnt include the APN's and how to fix it but i need someone to test this for me If you have an LTE device, Please PM me
EDIT2: the possible fix is packaged and waiting for someone to test it...tick tock...
dowenprs said:
Question, does this include the new(er/ish) CM browser based on the AOSP browser? I've been running the official nightlies on my sons Galaxy Tab Pro 8 and it has their new materialish AOSP browser, and it's great, would love to see it on the N9.
Thanks
Dan
Click to expand...
Click to collapse
The AOSP browser on this rom is MD enabled...so it does look nice.
P3CO said:
Do you have GPS working?
Click to expand...
Click to collapse
GPS is working for me.
vboyz103 said:
The AOSP browser on this rom is MD enabled...so it does look nice.
Click to expand...
Click to collapse
Huh, I don't see it anywhere. Is it packaged in the gapps for some reason? I just went straight to the newest build, maybe it was only in one of the older builds?
*edit*
Figured it out, the gapps package I was using was removing the aosp apps.
zawata said:
@inffy
im gonna take a whack at fixing the APN problem tonight, though i dont have an LTE tablet i do know how to somewhat test if it works, do you mind if i use you as my dummy Test Subject device tester?
EDIT: i think i found out why this doesnt include the APN's and how to fix it but i need someone to test this for me If you have an LTE device, Please PM me
EDIT2: the possible fix is packaged and waiting for someone to test it...tick tock...
Click to expand...
Click to collapse
@zawata
PM me the link I will test it
inffy said:
@zawata
PM me the link I will test it
Click to expand...
Click to collapse
Cool give me like 5 minutes
EDIT: you have been PM-ed
New build uploaded
Changelog:
28.1.2015
- Synced latest cm source
- Fixes to CM SetupWizard
- SystemUI: clean up Location tile
- cherry-pick Custom LCD Density
- cherry-pick Wifi: add option to show quick settings detail view
Download: https://www.androidfilehost.com/?fid=95916177934518833
Disclaimer
Your warranty is now void!
You will be doing everything at your own risk.
I am not responsible for bricked or damaged devices.
Recovery
Please use exclusively TWRP for flashing, other recoverys are not supported!
Changelog
aosp_kitkat_maguro-20150412
Rom: fix geolocation
Kernel: remove synchronize rcu
Bugs
You tell me
Download
AOSP Kitkat
Gapps Kitkat
Extensions
SuperSU
Sources
Sure look into GitHub
History
Code:
aosp_kitkat_maguro-20150410
Rom: add modded aosp launcher
Gapps: add some missing files
Gapps: update playstore
Gapps: update play services
Gapps: fix permissions
aosp_kitkat_maguro-20150406
Rom/Kernel: optimized for better performance
Rom: fix browser incognito mode
Rom: remove built in email
aosp_kitkat_maguro-20150403
Build: add missing variant cortex-a9
Rom: fix video playback
Rom: fix low speaker volume
Rom: add loudness enhancer
aosp_kitkat_maguro-20150402
Build: use linaro gcc 4.8 toolchain
Rom/Kernel: revert archidroid optimizations v3
Rom: add back livewallpapperspicker
Rom: update hosts file
Rom: disable dataroaming
Rom: allow override of dun settings
Kernel: rebase for clean codebase
Kernel: revert f2fs preparation
Kernel: add uksm
aosp_kitkat_maguro-20150328
Build: use google gcc 4.8 toolchain
Rom: archidroid optimizations v3
Rom: fixed grafical glitches
Kernel: prepared for f2fs
aosp_kitkat_maguro-20150325
Rom/Kernel: initial release
Rom: adblock built in
Rom: use launcher3 from omnirom
Rom: remove updater and bug report
Rom: clean up apps and wallpapers
Kernel: add asram (~50mb more ram)
Kernel: slightly gpu oc
More: much much more dont want to list all
Wow, thanks for keeping the GNex scene alive. I'm using your Unofficial CM11 and I'm really happy. I must try this, too!!!!.
I was also happy with CM11 but after try AOSP its an other world.
Lol!! 129MB!! I didn't see a tiny zip since ics :good:
anyway I found what I was talking about in the other thread
http://review.cyanogenmod.org/#/c/54900/
take a look if I you find it good!
Saw it already, will check it if its needed in AOSP or not.
Gesendet von meinem Galaxy Nexus
What's the difference between this ROM and Shiny ROM?
Based on lastest kitkat version, contains lastes kernel with asram (~50mb more useable ram) and so on.
Thank you very much, i'm trying this rom and it's very good and fast. Yes there are glitch when i go in standyby mode (pressing power button), in recent menu and in screenshot.
Thumbs up for helping keep our legacy device alive [emoji2]
---------- Post added at 05:24 PM ---------- Previous post was at 05:20 PM ----------
Can you implement rro layers theme engine in this awosome rom
alboz83 said:
Yes there are glitch when i go in standyby mode (pressing power button), in recent menu and in screenshot.
Click to expand...
Click to collapse
This is known as you have seen in first post, will work to fix them but it needs time.
CoDe LaZaRuS said:
Can you implement rro layers theme engine in this awosome rom
Click to expand...
Click to collapse
First of all we need to get this stable, after that we can talk about what can be added or not.
Please, in next release add in build.prop:
persist.sys.dun.override=0 (allows forced wifi hotspot for not friendly carriers)
persist.sys.root_access=1 (for supersu to work)
Edit:
Just tried the rom, it's good! :good::good:
Now here's what imo can be improved:
Very poor sound, it's very low.
Feel the lack of reboot menu.
There's no in/out data arrow signal (it's very stock!)
There's a huge delay when you put device in sleep mode and you hear the "click" sound of locked device.
Swipe up/down notification panel shows for a second a black status bar.
Conte Mascetti said:
Very poor sound, it's very low.
Feel the lack of reboot menu.
There's no in/out data arrow signal (it's very stock!)
There's a huge delay when you put device in sleep mode and you hear the "click" sound of locked device.
Swipe up/down notification panel shows for a second a black status bar.
Click to expand...
Click to collapse
1: For me sound is ok, but will take a look
2: Will come back soon, dont know when
3: Thats not true, you just have the signal indication in toggle
4: Just the sound delay which can be changed, will also take a look
5: Sswipe it up and down up and down again and again, no problem here
As you know AOSP needs more work as any other, since its stock google.
Be sure will work onto it, but this takes time so please be patient.
Yes I know, take your time, no hurry at all, I try my best to report a helpful user experience. ?
From GNexus
3. I meant in statusbar not the toggle
Conte Mascetti said:
3. I meant in statusbar not the toggle
Click to expand...
Click to collapse
Again stock google (AOSP) dont have this indications in statusbar.
On AOSP the indications are just in toggle, all other roms add it as "feature" thats shown also in statusbar.
sgspluss said:
Again stock google (AOSP) dont have this indications in statusbar.
On AOSP the indications are just in toggle, all other roms add it as "feature" thats shown also in statusbar.
Click to expand...
Click to collapse
True, I forgot about it, do u think to add them?
Few features will be add back later if the rom are stable.
We will see what will be added or not.
Will you be adding things at our request?
I never jumped back to Stock Android because I got used to Themes, Notification Bar Toggles, Mini and interactive tiles in the tile menu, Advanced Reset, Pre-Root (app integrated) and some settings that CM made famous.
Will add few features back, which exacly dont now at this point.
First of all we need to get this stable, the rest will follow then.
hmm but why is AOSP Kitkat soo much faster than CM11, which is also Kitkat?
Can you explain? Whats the biggest difference?
And...can i also use fancy-kernel with this ROM? Or would that slow down the Phone?