Related
looking to root, install twrp, and flash cleanrom.
i saw a root method that says to use a stock recovery, and i also saw the i shouldn't wipe the cache using twrp... can anyone give me a proper procedure to get to where i need? i have two little kids that are keeping me from doing the proper research myself, otherwise i would.
i am on mk1 firmware btw...
thanks!
wow, no one?
I haven't done this yet as I am kinda hoping there'll be a non-warranty killing approach available soon. I am in much the same boat as you, kids and all, too.
But I think the way to do it is:
1. Root the device with cf auto root: http://honai-android.blogspot.com.au/2013/12/how-to-root-galaxy-note-101-2014.html / http://forum.xda-developers.com/showthread.php?t=2490805
2. Install TWRP via Odin
3. Install cleanROM via TWRP: http://forum.xda-developers.com/showthread.php?t=2577389
I hope this at least gets you started. Let us know how you go as I will probably be following in your footsteps as soon as I can't stand this unrooted tablet any more... which will probably be very darn soon, warranty killing or not.
Or maybe someone else will chime in with better instructions.
Good luck!
+1 I'm about to send my warranty to hell. Stock ROM is ridiculously over bloated. The only thing i need is a working ROM with my "exotic" p605m variation.
I really need working radio / LTE.
Sent from my SM-P605M using XDA Premium HD app
anthropoidape said:
I haven't done this yet as I am kinda hoping there'll be a non-warranty killing approach available soon. I am in much the same boat as you, kids and all, too.
But I think the way to do it is:
1. Root the device with cf auto root: http://honai-android.blogspot.com.au/2013/12/how-to-root-galaxy-note-101-2014.html / http://forum.xda-developers.com/showthread.php?t=2490805
2. Install TWRP via Odin
3. Install cleanROM via TWRP: http://forum.xda-developers.com/showthread.php?t=2577389
I hope this at least gets you started. Let us know how you go as I will probably be following in your footsteps as soon as I can't stand this unrooted tablet any more... which will probably be very darn soon, warranty killing or not.
Or maybe someone else will chime in with better instructions.
Good luck!
Click to expand...
Click to collapse
Excellent, thanks! If I am gonna use TWRP, do I need to flash the stock recovery? Or can I just use the autoroot and then flash TWRP?
Which note 10.1 do you guys have? Wifi only?
Sent from my SCH-I925 using xda app-developers app
grmcrkrs said:
Which note 10.1 do you guys have? Wifi only?
Sent from my SCH-I925 using xda app-developers app
Click to expand...
Click to collapse
Yeah, I have the SM-P600, which is wifi only. We have a confirmed root, custom recovery, and CleanROM, but the Knox counter gets tripped, and for now there is no way around it.
a.demarco said:
Excellent, thanks! If I am gonna use TWRP, do I need to flash the stock recovery? Or can I just use the autoroot and then flash TWRP?
Click to expand...
Click to collapse
TWRP is custom recovery so yes you have to flash it using Odin.
read here: http://forum.xda-developers.com/showthread.php?t=2515656
After that you can download .zip file to storage and then install it using TWRP recovery.
WeedyEyes said:
TWRP is custom recovery so yes you have to flash it using Odin.
read here: http://forum.xda-developers.com/showthread.php?t=2515656
After that you can download .zip file to storage and then install it using TWRP recovery.
Click to expand...
Click to collapse
Yeah, I know that... My question was do I have to flash the stock recovery after rooting if I am gonna flash TWRP? Or can I just use the autoroot and then flash TWRP.
After ota 4.3 on stock att I747 Itried cf autroot and installed trp successfully. Somehow wiped the os off and now stuck n Samsung screen. I can get into download mode and recovery please help
You can load a custom recovery in Odin and flash a custom ROM.
Brandon136 said:
After ota 4.3 on stock att I747 Itried cf autroot and installed trp successfully. Somehow wiped the os off and now stuck n Samsung screen. I can get into download mode and recovery please help
Click to expand...
Click to collapse
Annoying, but not that hard to fix. You have two or three choices. If you made a backup, you can restore that from recovery mode.
You could go to download mode and flash a stock ROM onto the phone, then root it again.
Or you can go with a custom ROM as the poster above suggested. You generally need a custom recovery for that, so you'd go to download mode and install a custom recovery first. Followed by the custom ROM. If the custom ROM is a tar file, you'd also flash that with Odin in download mode. If it is a flashable zip file then the custom ROM would be flashed after you boot to the custom recovery mode first.
If flashing a stock image, ensure that it is a version 4.3 AT&T image. Trying to flash an earlier version will do bad things to your phone.
.
fffft said:
Annoying, but not that hard to fix. You have two choices.. you can go to download mode and flash a stock ROM onto the phone, then root it again.
Or you can go to download mode and install a custom recovery, followed by a custom ROM as the poster above suggested. If the custom ROM is a tar file, you'd also flash that with Odin in download mode. If it is a flashable zip file then the custom ROM would be flashed after you boot to the custom recovery mode first.
If flashing a stock image, ensure that it is a version 4.3 AT&T image. Trying to flash an earlier version will do bad things to your phone.
.
Click to expand...
Click to collapse
As far as I know, there is no stock 4.3 AT&T image available because one was never released by AT&T. However, I think there may be some 4.3 based ROMs that can be flashed.
Mobile Odin can also be used to flash an image since mobile Odin does not flash a bootloader or modem.
audit13 said:
As far as I know, there is no stock 4.3 AT&T image available because one was never released by AT&T. However, I think there may be some 4.3 based ROMs that can be flashed.
Mobile Odin can also be used to flash an image since mobile Odin does not flash a bootloader or modem.
Click to expand...
Click to collapse
It can be painful to be an AT&T customer at times. If a full factory 4.3 ROM wasn't released, the OP could still flash a properly formatted backup of someone's stock AT&T 4.3. But it would of course be easier to adopt a custom ROM as you suggested. One choice would be S3Rx 3.0.
.
Thanks for the help. However I tried to flash several 4.3 stock based roms and got nothing. I had an older s3 with a busted screen so I took the mother board out and put in this. I then flashed twrp and rooted. Im on the ota 4.3 and would really like a custom rom. Im currently on the hunt.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Brandon136 said:
Thanks for the help. However I tried to flash several 4.3 stock based roms and got nothing. I had an older s3 with a busted screen so I took the mother board out and put in this. I then flashed twrp and rooted. Im on the ota 4.3 and would really like a custom rom. Im currently on the hunt.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
You didn't give us nearly enough details to really know what you tried, let alone why it might have failed. AT&T is much more restrictive than most carriers and is locking their bootloader, so you have to be careful not to flash someone else's bootloader or a pre 4.3 version.
But since you have a rooted phone again.. installing a custom ROM wouldn't be hard to do.. I gave you a link to decent custom ROM that would work for you. Or you can browse other custom ROMs if you prefer. There are detailed instructions in the thread to guide you. Basically confirm that you have one of the listed AT&T bootloaders and modems, download the custom ROM to your phone, boot to twrp, do a "factory wipe", then install the custom ROM (flashable zip file) from the twrp install menu.
.
Try Philz Touch recovery instead of TWRP. If it doesn't work with Philz, let us know the error messages you're getting.
Can you post a link where I can find custom roms for att i747. Sorry for the noob question I have looked and cannot find one. Thank you. Im on rooted ota 4.3 with twrp currently.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Brandon136 said:
Can you post a link where I can find custom roms for att i747. Sorry for the noob question I have looked and cannot find one. Thank you. Im on rooted ota 4.3 with twrp currently.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
You can't find custom rooms cause you're blind or can't read. Backup out of the Q&A forum to the s3 page with all the forum listing then click on the forum that says AT&T galaxy s3 development. If you can't find one there you need to stop trying...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Brandon136 said:
Can you post a link where I can find custom roms for att i747. Sorry for the noob question I have looked and cannot find one. Thank you. Im on rooted ota 4.3 with twrp currently.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I have had better luck flashing ROMs with CWM than TWRP.
There are lots of ROMs here: http://forum.xda-developers.com/galaxy-s3-att/development
Couldmyou point me in the direction to switch over. I have read alot on that same issue
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Download Philz Touch zip from here and flash in TWRP. Reboot into recovery and you should have CWM installed.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
Sammobile.com has the stock images don"t they? Thats where i got my Fido factory image.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
I know thats right. This is my first so needless to say its all new. I looked for just custom roms and not delelopment. Sorry, thanks for the help.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Brandon136 said:
I know thats right. This is my first so needless to say its all new. I looked for just custom roms and not delelopment. Sorry, thanks for the help.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Any luck?
Yes I have cwm and titanium back pro, busy box pro, and a few other goodies. So I made me a backup and flashed 4.4.2. I'm playing with it now. It seems really solid and way better customizations. I'm about to head over and give the developers thanks. Thank you as well for your advice.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
OK, so I have been rooted almost a year, and have flashed several roms. I am currently on 4.1 of I believe Hybrid's rom. I believe I have had a 4.3 at one time but my last flash, whenever I started trying to flash a 4.4 version I started running into problems along the way. Is there anything special I need to do to upgrade to 4.4? Like besides flashing the rom, is there anything else I need to flash? Anyone have any recommendations?
Thanks!
Brandon.
wwe9112 said:
OK, so I have been rooted almost a year, and have flashed several roms. I am currently on 4.1 of I believe Hybrid's rom. I believe I have had a 4.3 at one time but my last flash, whenever I started trying to flash a 4.4 version I started running into problems along the way. Is there anything special I need to do to upgrade to 4.4? Like besides flashing the rom, is there anything else I need to flash? Anyone have any recommendations?
Thanks!
Brandon.
Click to expand...
Click to collapse
I have the same question here.... I just rooted my phone on 4.3 jelly bean stock but if one day a stock 4.4 is comming out do I need to unroot my phone to make the update ?
carlosQC said:
I have the same question here.... I just rooted my phone on 4.3 jelly bean stock but if one day a stock 4.4 is comming out do I need to unroot my phone to make the update ?
Click to expand...
Click to collapse
No one still has answered lol. I tried to flash a few different 4.3's and they kept failing. I'm using TWRP or whatever it's called 2.6.0.0 not sure what that's about. I had to flash an older rom I had on my computer to get it to allow my phone to work.
I prefer using CWM or Philz Touch which is based on CWM rather than TWRP. I tried TWRP with a few ROMs but they always failed to install. Once I switched to CWM, they installed without issue.You can flash the tar version of Philz using Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
To run 4.4.2 ROMs, you should update to the latest 4.1.2 bootloader, load a custom recovery, boot into recovery, wipe cache, Dalvik, data, system, and flash the new ROM.
audit13 said:
I prefer using CWM or Philz Touch which is based on CWM rather than TWRP. I tried TWRP with a few ROMs but they always failed to install. Once I switched to CWM, they installed without issue.You can flash the tar version of Philz using Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
To run 4.4.2 ROMs, you should update to the latest 4.1.2 bootloader, load a custom recovery, boot into recovery, wipe cache, Dalvik, data, system, and flash the new ROM.
Click to expand...
Click to collapse
I already updated my bootloader to the one that said "you cannot downgrade from this one or you will brick your device" I think that's the latest one I'm not sure lol.
By "Boot into recovery" are you meaning boot to the recovery screen? Sorry, I like to make sure of what I am doing so I don't brick anything lol. Although in a month I'm buying the Note 3 .
How do I go about switching back to CWM? Sorry to ask and sound dumb -- which I am not I have an associates of science in computer programming but just reciently switched to Mechatronic Engineering due to higher job growth in my area. I digress.
I could probably find dozens of articles on here how to go about it, but its generally quicker if someone just posts the link to the correct one to use for my device, every time I go searching these forms, I end up on every-which phone other than mine -- I do apologize.
You need the newest version of cwm to flash anything 4.4.
If you're rooted use goomanager from play store it will install cwm or look in the stickies there are files and instructions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
audit13 said:
I prefer using CWM or Philz Touch which is based on CWM rather than TWRP. I tried TWRP with a few ROMs but they always failed to install. Once I switched to CWM, they installed without issue.You can flash the tar version of Philz using Odin.
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att
To run 4.4.2 ROMs, you should update to the latest 4.1.2 bootloader, load a custom recovery, boot into recovery, wipe cache, Dalvik, data, system, and flash the new ROM.
Click to expand...
Click to collapse
If I have already TWRP installed can I install CWM over it ?
theramsey3 said:
You need the newest version of cwm to flash anything 4.4.
If you're rooted use goomanager from play store it will install cwm or look in the stickies there are files and instructions.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thats how I got TWRP I believe x). And ok thanks, I'll look around.
wwe9112 said:
Thats how I got TWRP I believe x). And ok thanks, I'll look around.
Click to expand...
Click to collapse
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
IT WORKED! Thanks so much. I am using Liquid Kit-Kat lol. Thanks again!
theramsey3 said:
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
It does work. I have flashed every 4.4 rom there is with that version of TWRP. Which is way better than cwm for me. :silly:
theramsey3 said:
Sorry I confused the cwm and twrp install process. Goo manager will download the newest twrp which is 2.6.3.1 I don't know if it will flash 4.4 roms or not... And yes you can flash cwm directly over twrp. You will want to use rom manager from play store to flash cwm. Sorry for the confusion...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
I have checked in the rom manager app it will install a version for galaxy s3 (metroPCS) d2mtr .... Is it going to work ??
carlosQC said:
I have checked in the rom manager app it will install a version for galaxy s3 (metroPCS) d2mtr .... Is it going to work ??
Click to expand...
Click to collapse
I just downloaded rom manager today and it installed cwm for I747 D2ATT. Perhaps you need a newer version of rom manager?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
I just downloaded rom manager today and it installed cwm for I747 D2ATT. Perhaps you need a newer version of rom manager?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Rom manager by clockworkmod ?? Why the **** it says "sorry we do not have a version for i747m " I dont understand why haha
carlosQC said:
Rom manager by clockworkmod ?? Why the **** it says "sorry we do not have a version for i747m " I dont understand why haha
Click to expand...
Click to collapse
I can not verify anything about the I747M, I have the AT&T I747. However I have heard it is safe for you guys to use the I747 D2ATT version of cwm. I am trying out the philz touch cwm that audit13 keeps suggesting, it is highly modifiable. Thus far I am happy.
Can anyone on the I747M verify it is safe to flash the D2ATT recovery? I do know for a fact you guys can use any of our roms.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
I can not verify anything about the I747M, I have the AT&T I747. However I have heard it is safe for you guys to use the I747 D2ATT version of cwm. I am trying out the philz touch cwm that audit13 keeps suggesting, it is highly modifiable. Thus far I am happy.
Can anyone on the I747M verify it is safe to flash the D2ATT recovery? I do know for a fact you guys can use any of our roms.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
yeahh maybe it will find it for your phone but not for mine .....
carlosQC said:
yeahh maybe it will find it for your phone but not for mine .....
Click to expand...
Click to collapse
Go to the general section and read the stickies here is a quote from the recovery thread I have heavily clipped it you need to read the whole thing in its original form. From what I read it is safe for your phone to use the D2ATT recovery image, I however take no responsibility for any thing that happens successful or not if you you flash it you wear it...
dstruct2k said:
So you've got your device rooted, and you want to install a custom recovery? Great! Don't just follow any guide you stumble across though, as some of the early recovery packages for the "AT&T" model were actually just copies of the custom Sprint recovery, and then you'll have all sorts of fun trying to install ROMs. ("Status 7" errors anyone? )
While this may seem difficult, it's really not. Grab a recovery image (these files end in ".img") such as ClockWork Mod (CWM) or Team Win Recovery Project (TWRP) for your device. Most ROM developers say to use CWM, but they both work equally well.
In our case, we need an image for the Samsung Galaxy S3 AT&T. Telus, Rogers, Bell, and SaskTel phones are (almost*) the exact same phone as AT&T, if you have one of these devices, you will be installing the AT&T recovery.
*NOTE: While we're on the topic, let's take a second to talk about what makes the Canadian I747M different from the AT&T I747.
The short version is... The modem. AT&T is using completely different and incompatible modem firmware in their phones when compared with the Canadian models. Rogers, Bell, Telus, and any other Canadian I747M are the same device (Samsung worked some strange voodoo and got all the Canadian carriers to agree on the same hardware!) which means that if Rogers releases a new modem firmware update, a SaskTel user could install it without issue. AT&T modem updates will not work on Canadian models, nor will Canadian updates work on AT&T phones! I've tried it. Trust me. You don't want to deal with the hassle of fixing it.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
Go to the general section and read the stickies here is a quote from the recovery thread I have heavily clipped it you need to read the whole thing in its original form. From what I read it is safe for your phone...
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
ok good thank you for your help !!!
carlosQC said:
ok good thank you for your help !!!
Click to expand...
Click to collapse
I edited the above post please reread it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
theramsey3 said:
I edited the above post please reread it.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
So in on word I can't really do anything with my rooted phone ?? When you flash a rom does it change anything to the modem file ?
Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info
I posted a few days ago about my bootlooping in the recovery. I finally fixed it by these 3 steps.
1) Odin flashed Stock 4.4.2 complete as this sets the correct boot loader.
2) I downloaded Twrp 2.7.0 the one that list KitKat (Must say this) 4.4 version.
http://goo.im/devs/OpenRecovery/hltetmo/openrecovery-twrp-2.7.0.0-hltetmo-4.4.img.tar
3) Right from Odin when flashing this you set it not to reboot, Once finished you then unplug the usb cable and pull the battery. Let is sit for about 10 sec. Then with the upVlm,Home and Power it will boot to the recovery. It first will post what you said but wait about 10 sec more twrp will come up.
4) Now you should be able to flash any rom you want. I am using axmans N3 for now works great. I will be trying CM 11 later.
5) make a backup once in Twrp
Hope this helps.
helterkelter said:
Hi XDA! I have a Samsung Galaxy Note 3 N900T T-Mobile. I've had custom roms such as CM11 Nightly in the past. Well after trying to do a fresh install a while back of another custom rom, my phone at first had no OS because I wiped it like a doofus. So I flashed it back to stock, 4.3 at the time. And then starting a couple weeks ago I flashed CWM using CWM Manager app. That's when the same issue that's recurring over and over, began. My phone works great as long as I never reboot into recovery. If I reboot into recovery it gets stuck in a bootloop. However I noticed tonight after trying to reboot into recovery using goo manager, I noticed the last line when it first boots, then bootloops, says Set warranty bit-recovery. If I remember correctly shouldn't it say kernel?? I know this is my fault because I'm not as knowledgable as all of you (I'm still learning on my own). SO my question is this. I want to fix this once and for all because I can't ever flash a custom rom like Darthstalker (that's the one I'd like to flash)...after several failed attempts of flashing CM for example, to no avail. What can I do to fix this once and for all and be able to flash a kernel, and Darthstalker? I can get into download mode, needless to say. ANd all the other times it's bootlooped I flashed KitKat 4.4.2 and everything works fine until i try to reboot into recovery. I am at my witts end because this i I really want a custom rom instead of flashing only the md5. Would anyone please be willing to give me a tutorial of some kind? I know it's a lot to ask but I can't find another reliable source that can explain how to do all of this. You're the only site I trust and if anyone is willing to give mea tutorial via email , PM, etc. I'd be eternally grateful beyond belief. Thank you in advance for any advice or info
Click to expand...
Click to collapse
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.
dragonstalker said:
I'm honestly confused on what you are asking. What bootloader are you on . Jellybean or Kit Kat. That is the big part of the question. If you are on Kit Kat you can no longer run Darthstalker as it's a 4.3 rom. Just curious because you say that you flashed 4.4.2 rom and everything works. Also, the bootloop would either be your kernel or your recovery. I would suggest Philz or Twrp 2.7 as they are both updated and will work on either bootloader.
Once you have flashed a bootloader and custom recovery NEVER USE ODIN AGAIN UNLESS YOU HAVE BRICKED YOUR PHONE.
Click to expand...
Click to collapse
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?
helterkelter said:
I'm on 4.4.2.I figured it is my kernel. After sending this message last night I had my phone in download mode but didn't do anything to it. I decided to turn it off and then on again and it booted. So if this is a kernel issue where would I find one and how would I do this? Oh and when the bootloop occurred last night I was trying to boot into recovery via too manager. If I put Twrp on my phone when I have CWM will they interfere? I apologize for the likely stupid questions but I'm just wanting to get it done properly. One last thing is PacMan ROM compatible?
Click to expand...
Click to collapse
The kernels you can use are listed in the general thread. A user posted a very good listing of what's what. TWRP 2.7 or Philz Touch are the 2 recoveries i would recommend using. Whichever one you decide will overwrite the other. you can never have 2 recoveries.
OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app
helterkelter said:
OK I'm sorry but I'm a little confused. One solution mentioned was to flash 4.4.2 stock using Odin. But you said not to use it unless I've bricked my phone. So now I'm lost. Lol. Do I flash the stock with the above mentioned method? Or do I flash a kernel and then a ROM? I apologize for my inexperienced questions. I'm including my device info below in hopes you can tell me the very first step I should take. Thank you for all your help!!!
Baseband N900TUVUCNB4
KERNEL- 3.4.0-660648 [email protected]#1
BUILD #- KOT49H.N900TUVUCNB4
SE FOR ANDROID STATUS- ENFORCING SEPF_SM-N900T_4.4.2-0005
SECURITY SOFTWARE VERSION- MOF v1. Release 2
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You are already on the 4.4 bootloader so you can no longer use the Darthstalker rom, you can only use Kit Kat 4.4.2 and above roms from here on out. Next question would be have your rooted your phone since the update and have a custom recovery. If you have not rooted, then you will need to use Odin to run the CF_Autoroot, but that will trip your Knox to 0x1. Thus voiding your warranty.
Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Yes I rooted. But every time I try flashing CWM or Twrp it bootloops. And to get out of bootloop I have to boot in download and then cancel download and it reboots normal again. Is this a kernel or boot loader issue?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Which cwm and twrp are you trying to flash. The only 2 that will work on Kit Kat are PHilz touch latest one, and TWRP 2.7
Twrp 5.7.3
Sent from my SM-N900T using xda app-developers app
So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app
helterkelter said:
So do I flash stock as mentioned from another member or do I flash a kernel? I'm not sure what to do next
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
oh sorry for the late response. Just got back from boy scouts. Anyway. No you don't need to flash back to stock, Your just flashing the wrong version of TWRP. You can go to the android originial development thread and download the TWRP 2.7 and flash via recovery and you will be all good to go. Also, download the latest Wootever kernel just to make sure you have both angles covered. Both downloads are found in the same section.
Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Ok thanks so much. Im a little scared to flash in TWRP as it always puts me in bootloops. I did download philz and I was considering flashing that via Odin as I can't boot into recovery. Would that be the next best thing to do? Oh and dont apologize!! I can't thank you enough!
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
Yes, odin the custom recovery and you should have no more issues. As for the bootloops with TWRP, you only had issues with that, because the version you were trying to use was outdated and does not work on Kit Kat
Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Hmm found an interesting possible solution and would greatly appreciate your guidance. I found a ROM that supports KK and I think in this thread that it may indicate why I bootloop when trying to bootbin recovery. http://www.infamousdevelopment.com/...-recover-from-a-bad-flash-updated-for-kitkat/
I'm seriously considering following this whole tutorial of his to the letter. Would it be wise to do?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
You have already upgraded to Kit Kat, that part is done. and you ran CF_Autoroot correct in Odin correct? If you have done both steps all that is left is to Odin the Philz Touch Recovery that you downloaded.
Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app
helterkelter said:
Ok and yes I did both the first two steps you asked above. After I do flash philz can I flash a ROM it CM or PacMan as long ad they're 4.4.2?
Sent from my SM-N900T using xda app-developers app
Click to expand...
Click to collapse
As long as they are AOSP Roms that support both bootloaders yes, and as i've been told most if not all the AOSP Roms do support the Kit Kat bootloader that you are already on.
Ok thank you again. I will likely flash philz tonight (if hubby allows me to cuz I usually stay up all night til I got my phone the way I want it, ie no boot loops lol) I will report back to let you know if it works. This phone has been through hell and back with me but I've learned a lot!! Especially from contributors such as yourself. :thumbup:
Sent from my SM-N900T using xda app-developers app
Cool. I'm glad I read this thread. I too had same problems.
Sent from my NOTE 3 using Tapatalk
I've been searching and reading for last couple days and haven't been able to find a definite answer. I'm using note 2 i317 at&t with stock 4.3 out of the box. I've been able to root it and get past Knox successfully. My question is can I install a custom recovery using stock 4.3? I'm wanting to use xposed framework and I want to be able to make a backup and have recovery optons. I've heard it may not be possible on 4.3 due to possible locked bootloader and the Knox thing. Any help is appreciated.
Just flash your custom recovery using Odin...
The Knox bootloader is generation #1...and does not prevent the flashing of custom recoveries or kernel images. .
Edit:...custom recoveries will trip the Knox counter...and void the device warranty. ..
Once you have a custom recovery. ..you can create your full nandroid backup...
Then you'll be able to do anything you want with roms etc....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
Thanks I appreciate it. So if I do happen to get into trouble will I be able to just use my backup to restore things or use Odin to flash back to the stock 4.3 rom?
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
jaybeerange said:
Thanks I appreciate it. So if I do happen to get into trouble will I be able to just use my backup to restore things or use Odin to flash back to the stock 4.3 rom?
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
Click to expand...
Click to collapse
Not exactly. ..
Once you root...or flash a custom recovery. ..you will trip the Knox counter...(bootloader flag)
Effectively. ..that will void warranty...
However. ..This flag will not effect using your nandroid backup to restore the device if you should need it... (store that backup on your PC for safety)...
But if you don't care about warranty. ..then a revert to stock 4.3 is quite easy...minus the tripped bootloader flag....g
Sent from my SAMSUNG-SGH-I317 using XDA Premium 4 mobile app
OK sounds good. Thanks for all the helpful info. I did a lot of flashing long time ago on my old cappy but haven't really messed with anything this new. I appreciate it.
Sent from my SAMSUNG-SGH-I317 using XDA Free mobile app
i'm on stock 4.3 with root access... yet ES file manager will not let me copy files to the system/app folder. Root checker says i have root access. terminal emulator shows # when i type su.
when i turn on root explorer in ES file manager - i get test failed. feature can not run on my device. any help?
Dont you need to change to read/write?
I have one more question on the 4.3 boot loader thing. Am I able to flash Roms that are based on an earlier android version like 4.2.2 since I am on official 4.3 boot loader? I was looking at flashing a ported miui v5 ROM but I'm pretty sure its 4.2 based.
rangercaptain said:
Dont you need to change to read/write?
Click to expand...
Click to collapse
when i check the properties of the System/app folder with ES file explorer... it says yes to both readable and writable.
Sry if I seem like I'm thread jacking but just wanted to clarify something. So with the AT&T note 2 on the stock ota 4.3 we can still install a custom recovery and flash custom roms and kernels or does it have to be 4.3 touchwiz based roms? If so can someone tell me the steps to do so?
The only reason I'm asking is I have both an att not 2 and a Verizon both on 4.3 and with the Verizon note 2 I had to use safestrap to flash a custom rom but can't flash kernels (so I'm not really new to flashing and all but new to the att scene and wanted to make sure bc I was told that with a locked bootloader I couldn't flash roms and a custom recovery and don't want to break my phone)
Thanks (also I only had an att note 2 is so I can get 4g lte on straight talk but I like having the note 3 features)
Again thanks for the help as of right now my att note 2 is a paper weight and if I can flash any custom rom on stock 4.3 it'd be great bc at least I wouldn't have wasted my money haha
Sent from my SCH-I605 using XDA Free mobile app
ArmStrongDickPunch said:
Sry if I seem like I'm thread jacking but just wanted to clarify something. So with the AT&T note 2 on the stock ota 4.3 we can still install a custom recovery and flash custom roms and kernels or does it have to be 4.3 touchwiz based roms? If so can someone tell me the steps to do so?
The only reason I'm asking is I have both an att not 2 and a Verizon both on 4.3 and with the Verizon note 2 I had to use safestrap to flash a custom rom but can't flash kernels (so I'm not really new to flashing and all but new to the att scene and wanted to make sure bc I was told that with a locked bootloader I couldn't flash roms and a custom recovery and don't want to break my phone)
Thanks (also I only had an att note 2 is so I can get 4g lte on straight talk but I like having the note 3 features)
Again thanks for the help as of right now my att note 2 is a paper weight and if I can flash any custom rom on stock 4.3 it'd be great bc at least I wouldn't have wasted my money haha
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
I have the att note 2 and it came with stock 4.3 and I'm now running ezkat 4.4.2 with agni kernel. So yes you can run roms and kernels. Only thing I'm not 100% sure on is if you can downgrade to 4.2 or 4.1. Here is the link to the room I'm running. It's great and has a lot of note 3 features and some s5 features.
http://forum.xda-developers.com/showthread.php?t=2747733
jaybeerange said:
I have the att note 2 and it came with stock 4.3 and I'm now running ezkat 4.4.2 with agni kernel. So yes you can run roms and kernels. Only thing I'm not 100% sure on is if you can downgrade to 4.2 or 4.1. Here is the link to the room I'm running. It's great and has a lot of note 3 features and some s5 features.
http://forum.xda-developers.com/showthread.php?t=2747733
Click to expand...
Click to collapse
OK how would I go about installing the custom recovery (also what did u use to root? And just saying I'm more familiar with the Verizon note 2 so that why i have some noobish questions lol) I'd rather not try downgrading
Could you please give me step by step instructions since i can't find any on how to install a custom recovery on stock 4.3?
Thanks
Sent from my SCH-I605 using XDA Free mobile app
ArmStrongDickPunch said:
OK how would I go about installing the custom recovery (also what did u use to root? And just saying I'm more familiar with the Verizon note 2 so that why i have some noobish questions lol) I'd rather not try downgrading
Could you please give me step by step instructions since i can't find any on how to install a custom recovery on stock 4.3?
Thanks
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
Here is a link that shows you step by step to root(this is how I did it) also you will probably need to do the tutorial at the bottom of the page for the Knox security. http://www.droidviews.com/root-att-galaxy-note-2-sgh-i317-on-android-4-3-ucubmk6-firmware/
And here is recovery I recommend http://forum.xda-developers.com/showthread.php?t=2159652
jaybeerange said:
Here is a link that shows you step by step to root(this is how I did it) also you will probably need to do the tutorial at the bottom of the page for the Knox security. http://www.droidviews.com/root-att-galaxy-note-2-sgh-i317-on-android-4-3-ucubmk6-firmware/
And here is recovery I recommend http://forum.xda-developers.com/showthread.php?t=2159652
Click to expand...
Click to collapse
Ok I'll just use saferoot to root since I used it before
http://forum.xda-developers.com/showthread.php?p=48392009
My question is though is how do I install the recovery (I'll read more into it but how did u do it so I don't brick the phone) and also how can we flash custom roms and kernels if it's on stock 4.3 with the locked bootloader? Or is it not locked?
Sent from my SCH-I605 using XDA Free mobile app
ArmStrongDickPunch said:
Ok I'll just use saferoot to root since I used it before
http://forum.xda-developers.com/showthread.php?p=48392009
My question is though is how do I install the recovery (I'll read more into it but how did u do it so I don't brick the phone) and also how can we flash custom roms and kernels if it's on stock 4.3 with the locked bootloader? Or is it not locked?
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
I just used Odin and flashed phils cwm file. You can get it in either a flashable zip or and Odin flashable file. The bootloader not really locked from what I understand it just won't let you replace it with an earlier version. Basically no problems flashing roms and kernels and such. You just have to kill the Knox security deal with super su
jaybeerange said:
I just used Odin and flashed phils cwm file. You can get it in either a flashable zip or and Odin flashable file. The bootloader not really locked from what I understand it just won't let you replace it with an earlier version. Basically no problems flashing roms and kernels and such. You just have to kill the Knox security deal with super su
Click to expand...
Click to collapse
Ok I've never used Odin before does it say how to use Odin to flash the recovery? And thanks for ur help
Sent from my SCH-I605 using XDA Free mobile app
ArmStrongDickPunch said:
Ok I've never used Odin before does it say how to use Odin to flash the recovery? And thanks for ur help
Sent from my SCH-I605 using XDA Free mobile app
Click to expand...
Click to collapse
I think it does. Basically load up Odin have your phone in download mode and put the recovery file into pda slot make sure Odin recognizes your phone and hit start.
jaybeerange said:
I think it does. Basically load up Odin have your phone in download mode and put the recovery file into pda slot make sure Odin recognizes your phone and hit start.
Click to expand...
Click to collapse
Ok sounds good I'll give it a try tomorrow I'll post any questions or how it goes. Thanks
Sent from my SCH-I605 using XDA Free mobile app
Deleted
jaybeerange said:
I think it does. Basically load up Odin have your phone in download mode and put the recovery file into pda slot make sure Odin recognizes your phone and hit start.
Click to expand...
Click to collapse
What version of Odin did you use or should I use? And can you send me a download link? And I just put the recovery file into pda slot and flash that's it?
Sent from my SCH-I605 using XDA Free mobile app