Smartwatch SW2 functionality - Sony Smartwatch 2

Hello, i have some question about sony smartwatch 2
When i connect my phone with SW2 and then disconnect it, does it still show time?
What apps/functions are avaiable when the phone is disconnected?
When i turn on the smattwatch, can is set time or i have to connect them to phone and then disconect to time be shown?
Last question: can be smart menu accesed by tapping display or only by clicking on/off button?

old fox said:
1 : When i connect my phone with SW2 and then disconnect it, does it still show time?
2 : What apps/functions are avaiable when the phone is disconnected?
3 : When i turn on the smattwatch, can is set time or i have to connect them to phone and then disconect to time be shown?
4 : Last question: can be smart menu accesed by tapping display or only by clicking on/off button?
Click to expand...
Click to collapse
1 : Yes
2 : Alarm, stopwatch, timer, calculator, and all app with text (note) data (all this are stored in memory) : notification history, Evernote, Smartnote....
3 : Yes you have time for most of face time widget or standard face
4 : Must press power button to activate screen and use smart button
OR
Use app/face wich keep screen activated like some NeFa Studio face_app with screen always active and smart button stay active, or also with Wearable Widget / Zooper Widget.

1. yes it will still show time
2. too many apps to mention in a single post, but most are notification and watchface oriented
3. normally the watch syncs with the phone to set the date/time, but you can also set it manually, if you disconnect after syncing, it will still show the correct date/time
4. you have to press the power button to access the menu (twice, in fact)

Whats the functionality of the watch without any phone? I assume its very limited

Hours, Alarms, Stopwatch, Timer, calculator and all note app Evernote, Smartnote.... and notification history.

dersie said:
Hours, Alarms, Stopwatch, Timer, calculator and all note app Evernote, Smartnote.... and notification history.
Click to expand...
Click to collapse
Man I'm thinking to buy it.
Is it have sleep monitor and heart rate?
(deep sleep time - vibrate wake up - pulse)

henry1550 said:
Man I'm thinking to buy it.
Is it have sleep monitor and heart rate?
(deep sleep time - vibrate wake up - pulse)
Click to expand...
Click to collapse
No No sensor just ambiant sensor for backlight. I use a Fitbit One (or my Gear S) My Wear Watch LG-R (and G) are very bad, maybe in 10 years.....

Fb extension
Fb smart extension not working on my Sony sw2 can u help me pls..

Fb do not work since awhile. Fb changed his notification system and now do not permit 3rd app to read his notification system. Many many..... app with Fb notification do not works now

Related

How to use the tectiles?

So I want to use the tectile in my car. The setting is simple, I want to tap the tectile and my N2 will change into the drive/car mode.Also I want it to go back to normal mode when I get out of the car, do I need to set up another tectile for that?
The tectiles don't have a switch mode or toggle mode? I know nfc task launcher can make switches & toggles but I'm not sure of the tectiles app
So I'm using NFC Task Launcher and I set it to Drive Mode. And it works. But I noticed the settings will remain the same even when I tap it again. So in other words, I would need 2 tectiles, one to get it to drive mode and another one to get back to normal mode? That would be stupid and a waste.
When you select drive mode, does it give you the option to turn it on, off or toggle?
Edit: I see it does give you the option to toggle it. Select that option when writing to the tag. Should do the trick
im pretty sure you would have to make it 2 separate tiles because 1 tile changes what you want changed and every time you touch that tile, it'll do that until you change it yourself or use a different tile. your phone doesn't stay connected to the tectile, it just reads the comand and executes
eurohomie said:
im pretty sure you would have to make it 2 separate tiles because 1 tile changes what you want changed and every time you touch that tile, it'll do that until you change it yourself or use a different tile. your phone doesn't stay connected to the tectile, it just reads the comand and executes
Click to expand...
Click to collapse
Yeah. I figured it out by playing with it. I guess it's a way for them to make more money.
safeplayer22 said:
So I'm using NFC Task Launcher and I set it to Drive Mode. And it works. But I noticed the settings will remain the same even when I tap it again. So in other words, I would need 2 tectiles, one to get it to drive mode and another one to get back to normal mode? That would be stupid and a waste.
Click to expand...
Click to collapse
If you are using the current version of NFC Task Launcher, you hit the plus to add a new tag.
Select New Tag.
Add Enable Car Dock {Driving Mode?}
Swipe the screen to the left to create a Switch Tag and hit the Add a Task button.
Add the Disable Car Dock. {Driving Mode?}
Save and write.
Now the first time you do it, it will enable and the second time it will disable it.
I just created one to do just that.
If you have trouble, I can do screenshots in more detail.
Sent from my Transformer Prime TF201 using Tapatalk HD
pbelcomp said:
If you are using the current version of NFC Task Launcher, you hit the plus to add a new tag.
Select New Tag.
Add Enable Car Dock
Swipe the screen to the left to create a Switch Tag and hit the Add a Task button.
Add the Disable Car Dock.
Save and write.
Now the first time you do it, it will enable and the second time it will disable it.
I just created one to do just that.
If you have trouble, I can do screenshots in more detail.
Sent from my Transformer Prime TF201 using Tapatalk HD
Click to expand...
Click to collapse
That's pretty much what I did. I've written 3 tags so far. One for home, one for car, and one for office.
The one for home turns off gps, turns on wifi, sets sound profile to normal, loudest ring tone, enables auto-sync, and sets the brightness down to 20%. It also disables the lockscreen because frankly I don't need the lockscreen around the house.
The one in the car turns off wifi, turns on BT, turns on GPS, disables auto-sync, turns brightness up to 80%, sound profile normal, loudest ring volume.
And the one in the office turns off wifi, turns off BT, turns off GPS, disables auto-sync, brightness to 20%, sound profile vibrate.
This thing is just super fun. I have to think of more places I can put these tags on. I'm thinking of putting one in the bathroom to automatically turn on npr in the morning.
With NFC Task Launcher, there is "two tasks" so you can set 2 tasks with one tag. It's exactly what I wanted!
So I just set one for the office where: 1st Task: Ringtone and Notification goes to vibrate only. 2nd Task: Ringtone & Notification goes to level 5. So when I get into the office, I would tap it once and it will go into office mode, then when I leave the office, I tap it again and it will go into the "2nd Task"!
Also found out that you cannot use NFC while the screen is off! That's stupid. So I searched and found this but reading it tells me that it does not work for the N2.
http://forum.xda-developers.com/showthread.php?t=1709586
Edit: ok found this thread and it might work with screen off:
http://forum.xda-developers.com/showthread.php?t=1999569

New Features Requested

Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
TRLOS said:
Hey guys.
I just contacted Motorola to request some new features be added to the stock ROM (which in my opinion) would be crucial to increasing the functionality and battery levels of the watch.
Don't know if any Motorola Dev's/Engineers are following this site but just in case, I'd love to have these features asap.
Please add more if there is anything I have missed.
1. Have the ability to turn Vibrate OFF while still receiving notifications on the watch
Why ? Because I have my phone in my pocket constantly, and my phone vibrates when a new notification comes up. I dont need my pocket and my wrist vibrating together.
Also, Increase battery life.
2. Need to have the ability to turn off notifications for certain apps. For Example, I want the watch to vibrate when an SMS or Email comes through, but turned off for Messenger, kik, and everything else.
Also, by having this feature, Im sure a developer could write up a small app to install onto the phone which would tell the watch which notifications to vibrate for, and which to just display on the screen.
And again, this will save battery life by turning the vibrate motor off for (in my case) 90% of the notifications coming through.
3. Have a slider to control the level of vibration or the burst of vibration.
Why ? This adds a level of customization to the watch.
Also, I see people complaining that the watch doesn't vibrate enough while in my case, its vibration time is too long. By having the ability to shortening the vibrate time, you also save battery life (if not by much).
By having all 3 features embedded into the ROM, On the average user, it should increase battery life by almost double (if not more).
Click to expand...
Click to collapse
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
HuStLaZ said:
Can't you turn off notifications for certain apps in the Android Wear app (mute apps)?
Click to expand...
Click to collapse
Im not talking about turning off notifications all together.
I was talking about turning off the vibration for certain apps, but still having the notifications pushed to the Moto360 display.
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
kingcliff00 said:
Number 2 can already be done you can go to the Android Wear App in Setting Click Block App Notification then Pick Whatever App u want to mute
Oops didn't see the last comment
Click to expand...
Click to collapse
Lol
Already found that setting.
Not what I was looking for. lol.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
I like this idea because sometimes it's hard getting the watch to light up with motion, so turning off that feature for when it does work would be fine.
In my case, I have the phone vibration turned off and rely on the watch to deliver notifications.
My one and only important feature request is the ability to create my own canned response list.
Of course, official support for 3rd party keyboards would be nice as well.
Bluetooth LE Peripheral Mode
I'm not sure if they intend to include Bluetooth LE Peripheral Mode in their Lollipop release. Google chose not to include peripheral mode for the Nexus 5 and Nexus 7, although it is included with the newer Nexus 6 and 9. But for Android Wear, Peripheral Mode would enable a huge number of new and useful apps, that would significantly improve the usefulness of the watch. The simplest one would be a beacon to help you find your watch when you forgot where you left it, but enabling service solicitation would open a whole new world of applications for the watch.
#1 has worked since day one.
I get a notification, my phone remains silent, the watch vibrates. It's in the AW app settings.
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
pratik_193 said:
according to me, since the watch has a inbuilt mic, a feature can be added that when someone calls, answer from the watch, just speak that you'll call back later & disconnect. this will be helpful if you are driving... no need to pick the phone ...
Click to expand...
Click to collapse
Instead of swiping to answer the call, You can just swipe upwards to reject call with similar messages sent automatically
Sent from my SM-N910C using Tapatalk 2
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
apgrovas said:
Good list, I have one more. Allow the setting of alarms for only certain days. For example, I would like to be able to set an alarm at 7 PM that goes off only on weekdays and not weekends, as I use this to let me know when I can get into the car pool lane when I am driving back home from work. That alarm is useless on the weekend, so no need for it to be turned on every day.
Click to expand...
Click to collapse
Just select the days you would in alarm setup, do not check saturday and sunday
I am still wondering which watch support Bluetooth peripheral?
As I know LG G watch 5.0.1 do not support it.
if (mBluetoothAdapter.isMultipleAdvertisementSupported()) {
will return false.
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
anthonyg45157 said:
Pretty neat ideas. I have one id like to add lol. I want to be able to turn off motion detection for the screen. I had this feature on my galaxy gear and it gave me an day and half EXTRA battery with it turned off. We could get similar battery life (3-4 days with average use,custom rom too) if this was disabled. I had to always press the button to turn the screen on to check the time, but notifications still lit the screen up when they came in. Totally worth an extra 24-36 hours of battery . However i like the idea of being able to tap the screen to wake the moto360.
So basically I want motion detection disabled but leave tap to wake on.
Click to expand...
Click to collapse
Quoting myself because my wish came true!! Props to moto
---------- Post added at 07:58 PM ---------- Previous post was at 07:52 PM ----------
aarons6 said:
on mine the whole notification thing is messed up..
sometimes it will vibrate and pop up when i get a text or email.. but then sometimes it doesnt do anything at all.
hardly ever, does it vibrate when i get a fb IM.. but it pops up and the screen lights up.
maybe they should fix it first before adding anything.
Click to expand...
Click to collapse
Pretty sure vibration is app dependent. Example, 8sms. You can change the vibration length in the settings. If you set your phone to 1000ms vibration when you get a text your phone AND watch will vibrate for 1000ms(or whatever vibration pattern you set) To further my point I would NEVER feel the vibration of Snapchat updates because it was so short. I'm using xposed(gravity box) to change snapchats vibration length and I feel the notification on my watch and phone every time.
I agree 100% google should have a universal setting to be able to change vibration,notification, and screen light up settings.
anthonyg45157 said:
Quoting myself because my wish came true!! Props to moto
Click to expand...
Click to collapse
OK, so how do you turn off the auto-on option?
GuyInDogSuit said:
OK, so how do you turn off the auto-on option?
Click to expand...
Click to collapse
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
goa200 said:
Have some of you even checked all options in the android wear app? let alone even opened it? seriously start looking around and you'll find it.
Click to expand...
Click to collapse
I have.

[Q] Mute notifications when phone screen is on

Hi,
I'd like to find a way to mute notifications on my watch when I use my phone (= phone screen is on). It's really annoying when I hold a conversation on Facebook Messenger and every time I receive a message my watch vibrates...
I tried Feel The Wear in a free version - I can set a behaviour, when the phone screen is on, but... it doesn't work. Well, to be precise - when e. g. I set 3 x long pattern for an app and the above option is set to "vibrate", then I'll receive notification with 3 x long and... an extra short vibrate in the meantime. When I change the option to "mute" - there are no 3 x long vibrates, but... still is the short one. I have no idea what's going on with that additional short vibrate - it's not set anywhere...
Another problem with Feel The Wear - it doesn't work with custom patterns in Wear Messages app. I just can't mute that app in any way, its vibrate pattterns override FTW settings.
I tried to use MacroDroid and enabling "do not disturb" mode when screen is on and disabling when it's off. It seemed to be the solution, but... when watch is charging, my phone doesn't vibrate (even though the "don't disturb" is off then).
I have really no idea what else I can try. Do you have any idea wtf with that extra short vibration when using FTW? Do you know if the paid version has any option that would help? Any other ideas what to do with that problem?
I have MiBand 2 also and it doesn't have such problems, it automatically mutes when phone screen is on...
PS I use SW3 with Note 4, 6.0.1.
PS2 In Android Wear app the option "mute phone when wearing watch" is enabled.

[HELP] Mate 20 No notification or delay until screen is on

Hi guys,
There is 10-15 mins delay or no notification at all from some third party apps until I press the power button to turn on the screen - not unlock, just turn on.
It mostly happens to Gmail and the Reolink App for my security cameras.
After I turn on the screen I can receive real time message from these two apps for a while but soon goes back to how it was before.
Things I have done but doesn't help:
1. Enabled “Stay connected when device sleeps” in battery setting.
2. Set apps to "Manage Manually" in App Launch
3. Enabled all notification for Apps.
4. Set "Don't Optimise" for Apps in Battery optimisation
I even followed the instruction below provided by @klaus27 to disable PowerGenie but it is still behaving in this way.
https://forum.xda-developers.com/mate-20-pro/themes/remove-powergenie-to-allow-background-t3890409
I really dont have any idea now can any one please help me out? Thanks in advance.

Question Vivo X80 Pro [Origin OS, CN Version] - Bugs & Experiences - Let's share

Dear Forum,
after scanning the x60 and x70 threads about notification issues I'm still struggling with missing notifications and badges for certain apps [in this case Signal and Threema]. What I did so far:
- uninstall com.vivo.pem via ADB App Control
- set notification settings correctly for the apps: (Allow notification, allow smart notification, Floating notifications on (Threema, Signal), Lock screen notifications on (Threema, Signal), display notification details on lock screen, Chats: priority display) // (Home Screen icon badges only for Whatsapp available for some reason)
- set single permission settings for the apps: autostart on, startup on, floating window on, desktop shotcuts on, display on lock screen on, background pop-ups on, Remove permissions and free up space off
- set display settings: show on the off-screen on, show on the lock screen on, show on the home screen on, show in the status bar on, notification method: original icon
- set battery settings correctly: Boost mode, saving mode off, high background power usage on, always on display on, optimize battery life off, auto enable battery saver off
[Phone settings: Drawer style, dark mode, Android Style control center, Vivo Origin System Launcher]
Whatsapp is working: Home Screen notifications, badges, also lock screen notifications - Threema and Signal are not working, driving me a bit crazy. "Sometimes" there is a notification sound, sometimes not. Starring at the lock screen with turned on blue ambilight, it sometimes appears, sometimes not. So my questions:
1) Is there anyone who has experience with Signal and Threema notifications on a Vivo device and could share his/her solution?
2) Should I uninstall also com.vivo.abe and com.iqoo.powersaving?
3) There are no badges for almost all third party apps (Whatsapp badges are working) - is there a way to change it, to get also badges for Signal, Threema, Telegram and so on? (Change Launcher?)
I appreciate your help!
ZarW said:
Dear Forum,
after scanning the x60 and x70 threads about notification issues I'm still struggling with missing notifications and badges for certain apps [in this case Signal and Threema]. What I did so far:
- uninstall com.vivo.pem via ADB App Control
- set notification settings correctly for the apps: (Allow notification, allow smart notification, Floating notifications on (Threema, Signal), Lock screen notifications on (Threema, Signal), display notification details on lock screen, Chats: priority display) // (Home Screen icon badges only for Whatsapp available for some reason)
- set single permission settings for the apps: autostart on, startup on, floating window on, desktop shotcuts on, display on lock screen on, background pop-ups on, Remove permissions and free up space off
- set display settings: show on the off-screen on, show on the lock screen on, show on the home screen on, show in the status bar on, notification method: original icon
- set battery settings correctly: Boost mode, saving mode off, high background power usage on, always on display on, optimize battery life off, auto enable battery saver off
[Phone settings: Drawer style, dark mode, Android Style control center, Vivo Origin System Launcher]
Whatsapp is working: Home Screen notifications, badges, also lock screen notifications - Threema and Signal are not working, driving me a bit crazy. "Sometimes" there is a notification sound, sometimes not. Starring at the lock screen with turned on blue ambilight, it sometimes appears, sometimes not. So my questions:
1) Is there anyone who has experience with Signal and Threema notifications on a Vivo device and could share his/her solution?
2) Should I uninstall also com.vivo.abe and com.iqoo.powersaving?
3) There are no badges for almost all third party apps (Whatsapp badges are working) - is there a way to change it, to get also badges for Signal, Threema, Telegram and so on? (Change Launcher?)
I appreciate your help!
Click to expand...
Click to collapse
the problem is dark mode. I have the same problem with Telegram. with clear mode no problem.
robbie1981 said:
the problem is dark mode. I have the same problem with Telegram. with clear mode no problem.
Click to expand...
Click to collapse
I turned dark mode off, Threema notifications in the status bar are working like 70% now, sometimes they don't - that's so weird.
Is there a solutions for getting badges? Maybe changing the launcher?
Same problem with Google's Messages app, so can't see when I receive a SMS.
I hope they will fix this ASAP.
xperia81 said:
Same problem with Google's Messages app, so can't see when I receive a SMS.
I hope they will fix this ASAP.
Click to expand...
Click to collapse
1) Set settings of the app like in 1st message
2) Set settings of battery/energy usage like in 1st message
3) Switch to bright/light-mode
4) restart phone
-> after doing that, almost 100% of all Threema message are shown as notification. Still struggling with AquaMail, but this will be fixed within next days.
ZarW said:
1) Set settings of the app like in 1st message
2) Set settings of battery/energy usage like in 1st message
3) Switch to bright/light-mode
4) restart phone
-> after doing that, almost 100% of all Threema message are shown as notification. Still struggling with AquaMail, but this will be fixed within next days.
Click to expand...
Click to collapse
Now at the moment everything seems to work even in dark mode, and even with AquaMail, I just followed this instruction:
https://www.chinahandys.net/vivo-china-version-einrichten/ (German)
No badges in AquaMail but in WhatsApp they work, but I dont need that.
xperia81 said:
Now at the moment everything seems to work even in dark mode, and even with AquaMail, I just followed this instruction:
https://www.chinahandys.net/vivo-china-version-einrichten/ (German)
No badges in AquaMail but in WhatsApp they work, but I dont need that.
Click to expand...
Click to collapse
I knew that tutorial before. For me the notifications in status bar and home screen for Threema and Signal did not work having dark mode turned on. Switching to the brigth/light mode the notifications work perfectly.
Considering the badges - I get used to it not having badges for messaging apps.
Just for the readers, you can turn on badges on the home screen for the following apps (Origin OS, Dim9000):
- Designs
- Settings
- iMusic
- iManager
- Kuaishou
- Messages
- Notes
- Recorder
- Telephone
- Clock
- V-Appstore
- Vivo
- Vivo.com
- VivoCloud
- Whatsapp
ZarW said:
Dear Forum,
after scanning the x60 and x70 threads about notification issues I'm still struggling with missing notifications and badges for certain apps [in this case Signal and Threema]. What I did so far:
- uninstall com.vivo.pem via ADB App Control
- set notification settings correctly for the apps: (Allow notification, allow smart notification, Floating notifications on (Threema, Signal), Lock screen notifications on (Threema, Signal), display notification details on lock screen, Chats: priority display) // (Home Screen icon badges only for Whatsapp available for some reason)
- set single permission settings for the apps: autostart on, startup on, floating window on, desktop shotcuts on, display on lock screen on, background pop-ups on, Remove permissions and free up space off
- set display settings: show on the off-screen on, show on the lock screen on, show on the home screen on, show in the status bar on, notification method: original icon
- set battery settings correctly: Boost mode, saving mode off, high background power usage on, always on display on, optimize battery life off, auto enable battery saver off
Click to expand...
Click to collapse
Thanks a lot for your suggestions, but no way to make the Telegram notifactions work...any suggestion? I don't have a sim inside the phone for the moment, but I don't think this is the problem
lukemo said:
Thanks a lot for your suggestions, but no way to make the Telegram notifactions work...any suggestion? I don't have a sim inside the phone for the moment, but I don't think this is the problem
Click to expand...
Click to collapse
1) set settings like in post 1
2) unmute chat in telegram (telegram itself)
3) switch into boost mode (battery settings)
4) allow background activity (battery settings)
5) turn off dark mode
6) restart phone
-> telegram is working perfectly for me with settings from post 1 and dark mode turned off. Always restart your phone to get things work. To be honest, this origin os behaves sometimes really strange :/ hope you get it work.
ZarW said:
1) set settings like in post 1
2) unmute chat in telegram (telegram itself)
3) switch into boost mode (battery settings)
4) allow background activity (battery settings)
5) turn off dark mode
6) restart phone
-> telegram is working perfectly for me with settings from post 1 and dark mode turned off. Always restart your phone to get things work. To be honest, this origin os behaves sometimes really strange :/ hope you get it work.
Click to expand...
Click to collapse
You are right about origin os...thanks again, I didn't put previously in boost mode and I only disabled com.vivo.pem...do you think that disabling is not enough?
lukemo said:
You are right about origin os...thanks again, I didn't put previously in boost mode and I only disabled com.vivo.pem...do you think that disabling is not enough?
Click to expand...
Click to collapse
To be honest, I do not know. While getting it working step by step I was very impatient at some point, so I can not tell you which setting is really needed to get it working - please feel free to test it step by step to figure out which settings are really needed. I will post my settings again a bit more structured.
The only thing I can tell you: I have uninstalled neither com.vivo.abe nor com.iqoo.powersaving, but with the settings below, uninstall of com.vivo.pem and a phone restart my notifications are working perfectly.
Tested and successfully working with Signal, Telegram, Threema, Whatsapp (Vivo X80 Pro, Origin OS, Dim 9000):
1) uninstall com.vivo.pem via ADB App Control
2) set notification settings correctly for the certain app (Settings/Notifications/App notifications/APP):
2a) allow notification
2b) allow smart notification
2c) floating notifications on
2d) Lock screen notifications on
2e) display notification details on lock screen on
2f) Chats: priority display (if there are chats listed, choose priority display)
3) set single permission settings for the certain app (long press App/App Info/App Permission/Settings Single Permission):
3a) autostart on
3b) startup on
3c) floating window on
3d) desktop shotcuts on
3e) display on lock screen on
3f) background pop-ups on
4) set single permission settings for the certain app (long press App/App Info/App Permission):
4a) permissions and free up space off
5) set display settings (Settings/Notifications/Display settings):
5a) show on the off-screen on
5b) show on the lock screen on
5c) show on the home screen on
5d) show in the status bar on
5e) notification method: original icon
6) set battery settings correctly (Settings/Battery):
6a) Boost mode on
6b) saving mode off
7) set battery settings correctly (Settings/Battery/More settings):
7a) always on display on
7b) optimize battery life off
7c) auto enable battery saver off
8) set battery settings for App correctly (Settings/Battery/background power consumption/App):
8a) high background power usage on
9) Restart Phone
ZarW said:
To be honest, I do not know. While getting it working step by step I was very impatient at some point, so I can not tell you which setting is really needed to get it working - please feel free to test it step by step to figure out which settings are really needed. I will post my settings again a bit more structured.
The only thing I can tell you: I have uninstalled neither com.vivo.abe nor com.iqoo.powersaving, but with the settings below, uninstall of com.vivo.pem and a phone restart my notifications are working perfectly.
Tested and successfully working with Signal, Telegram, Threema, Whatsapp (Vivo X80 Pro, Origin OS, Dim 9000):
1) uninstall com.vivo.pem via ADB App Control
2) set notification settings correctly for the certain app (Settings/Notifications/App notifications/APP):
2a) allow notification
2b) allow smart notification
2c) floating notifications on
2d) Lock screen notifications on
2e) display notification details on lock screen on
2f) Chats: priority display (if there are chats listed, choose priority display)
3) set single permission settings for the certain app (long press App/App Info/App Permission/Settings Single Permission):
3a) autostart on
3b) startup on
3c) floating window on
3d) desktop shotcuts on
3e) display on lock screen on
3f) background pop-ups on
4) set single permission settings for the certain app (long press App/App Info/App Permission):
4a) permissions and free up space off
5) set display settings (Settings/Notifications/Display settings):
5a) show on the off-screen on
5b) show on the lock screen on
5c) show on the home screen on
5d) show in the status bar on
5e) notification method: original icon
6) set battery settings correctly (Settings/Battery):
6a) Boost mode on
6b) saving mode off
7) set battery settings correctly (Settings/Battery/More settings):
7a) always on display on
7b) optimize battery life off
7c) auto enable battery saver off
8) set battery settings for App correctly (Settings/Battery/background power consumption/App):
8a) high background power usage on
9) Restart Phone
Click to expand...
Click to collapse
If i click on
settings/notifications/Display settings
everything is grayed out. I can not change nothing there. Anyone can help why I face this problem?
kenajanek said:
If i click on
settings/notifications/Display settings
everything is grayed out. I can not change nothing there. Anyone can help why I face this problem?
Click to expand...
Click to collapse
Just a guess - Vivo Account?
Are you logged in into your Vivo Account? If not, created one on their website and log in - please share if this is working...
ZarW said:
Just a guess - Vivo Account?
Are you logged in into your Vivo Account? If not, created one on their website and log in - please share if this is working...
Click to expand...
Click to collapse
Unfortunately Im already logged in into my vivo account. I disconnected, logged in again and restarted phone...Same outcome
kenajanek said:
Unfortunately Im already logged in into my vivo account. I disconnected, logged in again and restarted phone...Same outcome
Click to expand...
Click to collapse
What about your battery settings? Maybe before changing the display settings you need to do step 7) and 8) - but I've no clue why your display settings are grayed out. Have you deleted certain systemapps with ADB?
If you find the solution, just share it here.
ZarW said:
What about your battery settings? Maybe before changing the display settings you need to do step 7) and 8) - but I've no clue why your display settings are grayed out. Have you deleted certain systemapps with ADB?
If you find the solution, just share it here.
Click to expand...
Click to collapse
I tried several things now. Going back some steps and checking again ... always stays grayed out.
I deleted only vivo.pem and some Bloatware. Nothing what has to do with display settings ...
So at the moment I dont know what to do next, but with rest of settings all notifications working for me. Only lockscreen notifications dont show up as well as tiktok notification. But thats more or less OK for me.
If I find out how to change Display notification settings I will share here, for sure.
Hello
@kenajanek
Have you activated the Nano alerts ? (Settings/Notifications/Nano Alerts scenario settings )
Vivo_Fan said:
Hello
@kenajanek
Have you activated the Nano alerts ? (Settings/Notifications/Nano Alerts scenario settings )
Click to expand...
Click to collapse
Good point! If I activate them, I am able to change Display notification settings.
But is it recommendable to have them activated? I thought its kind of too chinese stuff, for being usefull here in europe.
ZarW said:
1) set settings like in post 1
2) unmute chat in telegram (telegram itself)
3) switch into boost mode (battery settings)
4) allow background activity (battery settings)
5) turn off dark mode
6) restart phone
-> telegram is working perfectly for me with settings from post 1 and dark mode turned off. Always restart your phone to get things work. To be honest, this origin os behaves sometimes really strange :/ hope you get it work.
Click to expand...
Click to collapse
thank for the hint,I think bug in darkmode is the root cause,I can get the notification sound but no visual in notification center, clearmode is ok!
I have reported this system level bug to the PM of iQOO(subsidiary of vivo, they share the same OS) via weibo, hope they can fix it in the later release!
kenajanek said:
Good point! If I activate them, I am able to change Display notification settings.
But is it recommendable to have them activated? I thought its kind of too chinese stuff, for being usefull here in europe.
Click to expand...
Click to collapse
greeting from China!
I have reported this system level bug in darkmode to the PM of iQOO(subsidiary of vivo, they share the same OS) via weibo, hope they can fix it in the later release!

Categories

Resources