Related
can this be done using the a flashable note 3 rom ?
http://www.androidfilehost.com/?fid=23159073880932541
Well i am not developer
But.i really wonder that what happens if note 3 rom flashed to note 2..
The leaked rom of 4.3 of note 2 has old kernel. So note applications are falling when its ported.probably because of old kernel.
But my question is what happens if note 3 rome is directly flashed to note 2..
Sent from my GT-N7100 using xda app-developers app
m_carleone82 said:
Well i am not developer
But.i really wonder that what happens if note 3 rom flashed to note 2..
The leaked rom of 4.3 of note 2 has old kernel. So note applications are falling when its ported.probably because of old kernel.
But my question is what happens if note 3 rome is directly flashed to note 2..
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
I'm also not a dev. And I wondered that too. Then I thought... if that was even possible someone would have already done it by now, right? Still, maybe we all wait for someone to try it... So, feeling courageous? Go ahead and let us know if that worked. But don't blame me if u get ur device bricked or something.
Sent from my GT-N7100 using xda app-developers app
Obviously you can't flash the note3 rom to note2 without modifying it. If it would even flash, your device would get bricked by the note3 kernel.
In the end, this is a question/answer thread. Please someone move it to the proper section or close it. No development going on here.
Gesendet von meinem GT-N7105 mit Tapatalk 2
Ok, I actually have been trying to port a N3 ROM over to N2 with no success. I have very limited time, a crashed hard disk and no Internet at home. If anyone is interested, I can upload (in maybe a few days - no net at home ) a half-baked port that just about gives the N3 boot sound and gets stuck at the Samsung text boot animation. I haven't gotten a logcat from it too, so its more like shooting in the dark.
Even if you are not interested in my half-baked port and want to start afresh, note that the /system partition's size in the N3 is pretty different. You'll either have to try a .PIT that gives you ~3GB to the /system or go my way of chopping down on the /system's contents to fit it to N2's default partitions...
I tried flashing ROMs based on the leak, and my Note 2 gets as far as the boot screen, where it starts to vibrate in a Morse code type pattern. I'm thinking combining one of the ROMs with a different kernel will get something started...
sabrdawg said:
I tried flashing ROMs based on the leak, and my Note 2 gets as far as the boot screen, where it starts to vibrate in a Morse code type pattern. I'm thinking combining one of the ROMs with a different kernel will get something started...
Click to expand...
Click to collapse
After you get stuck in the repeated vibrating pattern, reboot to recovery and head to /data/logs - pull the latest tar log (by UTC time) and go through the txt it contains - you will have the kernel log, logcat and all that you need to debug.
My mistake was I downloaded an incomplete dump that is missing part of the framework. Will try again with a different base when I get the time.
Awesome! So even after a battery pull, this information will still show on the log? A battery pull is my only way out after this happens. I'll give it a try!
---------- Post added at 09:08 AM ---------- Previous post was at 09:06 AM ----------
I need to add that I'm using a T-Mobile Note 2 (SGH-T889).
I do think that it's nearly impossinle, dur to the difference in resolution and width between N2 and N3 even if it boots up it will look distorded, and also is the N2 missing sensors that the N3 has..
some of the apk's are working on the leaked 4.3 firmware, i think u should help in getting the air command working properly, it's working but no icons, the thread is over in the apps section
slitex said:
I do think that it's nearly impossinle, dur to the difference in resolution and width between N2 and N3 even if it boots up it will look distorded, and also is the N2 missing sensors that the N3 has..
some of the apk's are working on the leaked 4.3 firmware, i think u should help in getting the air command working properly, it's working but no icons, the thread is over in the apps section
Click to expand...
Click to collapse
That is not a problem. We have seen ports from different resolutions in the past. We may have to change the resolution of png files in the drawables for some apk.
That said - and this is for all members - THIS IS A DEV DISCUSSION. UNLESS YOU ARE ATTEMPTING TO PORT THE ROM OR DO SOME DEV STUFF, PLEASE DO NOT POST HERE. USE THE GENERAL FORM INSTEAD. Hope you understand the importance of keeping a dev thread uncluttered.
@sabrdawg - yes, you pull the logs after battery pull (or holding down power-vol up-home to reboot into recovery. And I am using the N7100 leaked 4.3 as a base and N9005 stock to port. I am not sure if the T889 will work with the N7100's firmware - if it does not and if you cannot get the 4.3 leak to work on your phone you should hold back (unless you first port the N7100's leak to your device).
My porting attempts or on hold. The base ROM I picked (n a whole bunch of them I checked) are having problems with missing files in the framework. I have used up my monthly internet quota in my 3G and also the add-on pack's quota (and do not have internet at home ). Whoever is attempting a port, please download a full ROM from sammobile(say, SM-N9005 - UK or Singapore for example) extract it and deodex it to use as a base for porting to our device (Read up this link under "CONVERSION OF STOCK TAR.MD5 LEAK TO CWM FLASHABLE FOR NEW AND UPCOMING DEVELOPERS" (towards the bottom 3/4th of the page) if you are not sure how to go about it. Finally here is a good guide about porting.
Note that it would be helpful if you have some experience in porting, debugging using logcat and other logs. In any case, if you are not at least knee deep into Linux, Android and generally some technical affinity, you should not be attempting this. All the best. I will give it a shot if I can whenever I get some internet connection I can use to download the ~1.5GB stock ROM.
Maybe you can use a custom rom based on the leak for note 2...and a custom rom based on the official android 4.3 for note 3 and try this
http://forum.xda-developers.com/showthread.php?t=1957219
I dont have the note 2...or the note 3 to try this. But Im thinking maybe you can use wannamlite based on the leak fot note 2 and a wannamlite for note 3 (I really dont know if there is one).
Im not a dev but I use this metod to port some roms for my atrix and works ok.
So, in other words, one could take any 4.3 ROM out there for the T-Mobile Note 2, and any ROM based on the Samsung leak and do this?
sabrdawg said:
So, in other words, one could take any 4.3 ROM out there for the T-Mobile Note 2, and any ROM based on the Samsung leak and do this?
Click to expand...
Click to collapse
I dont know....I made this for my atrix using cm7 roms and works ok...maybe this can be done in this case...I use some cm7 rom from the Motorola Photon (similar to the atrix but bigger screen) and a cm7 rom for the atrix....everything works ok.
Maybe someone can try that...I dont have the note 2...so...I cant do it
Q&A for 10.01.14 | 4.4.2 | LikeWise S5 4.2 | NE4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
BUG!
I have problems with the ROM, when no stack, no single load cell is restarted. HEEEEEEEEELP!
yo tengo problemas con la ROM, cuando no tiene pila, no carga el celular solo se reinicia. AYUDAAAA!!
Sorry, but I honestly don't have any idea what you mean here. Those are terms not really used when dealing with rom issues.
But the simple solution is to flash stock, factory reset and start again.
Beyond that, we'd need a better description of the problems.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Queartion about flashing
So i am on cyanogenmod 11 4.4.4 right now. I noticed it says you will need a 4.3 modem and bootloader. What does that mean? Am I not able to flash this rom? Sorry for the dumb question, I am new to rooting and flashing roms.
That is referring to your base firmware version. When you flash firmware via Odin, it flashes multiple partitions to what ever build is being flashed. This includes the bootloaders, modem, and others. You can then flash roms on top of that, but the base firmware would remain unchanged. Roms only flash the system and boot (kernel) partitions (sometimes data too).
For the 4.4.2 TouchWiz roms to work, that base firmware MUST be at least a 4.3 build.
To check what you currently have, install and open Terminal Emulator from the store and enter this:
getprop ro.bootloader
It will tell you your current base firmware/bootloader version. If it's not a 4.3 or 4.4.2 build, you have to update before flashing the rom.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
It says I747UCDLK3, do I have to flash an update to the bootloader?
Weather on Lockscreen
Is there a way to get the weather on the lock screen of a At&t galaxy S3 4.4.2 KK Rom like the attached picture?
There is no "additional Information" selection under the main lock screen setting.
Likewise Galaxy S5 Rom for Galaxy S3
Can anyone confirm if this rom works well with SGH-i747M from Bell Mobile? Also, if I download this, will I still be able to recieve OTA updates? And if not, will Samsung Kies still detect it? And if so, would it install at all or what?
Does anyone have a guide with steps on how to flash this properly?
Any help at all would be appreciated, I'm still bit of a newbie at this... :/
You can only get ota if you are 100% full stock. No root, no mods, no custom anything.
You flash just like any other rom or mod. If you are not familiar with this, I highly recommend you don't do anything until you've read the sticky threads and searched the forums for remaining questions or concerns.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
[SOLVED] Weather on Lock Screen
Beesvee said:
Is there a way to get the weather on the lock screen of a At&t galaxy S3 4.4.2 KK Rom like the attached picture?
There is no "additional Information" selection under the main lock screen setting.
Click to expand...
Click to collapse
For those who wanted the weather on the lock screen like the attached picture: Note I am a total noob who just likes fiddling around. I do not know why or how this worked but.... I am running Enewman17 S5-EXperience Rom Found in the Likewise S5 thread.
1. renamed the SecSettings, SecSettings Porvider, and Keygard to .bak. in the priv-app using root explorer.
2. I used the SecSettings, SecSettings Provider, and Keygard from the S5 Sensation Rom and placed them into the priv-app and changed the premissions rw-r-r.
3. Reboot. Upon rebooting I got FC on settings but once the phone settled FC never happened again.
4. Go into the settings, lockscreen, then select additional settings, toggle on and select weather on lock screen.
5. Lock the screen to notice the affect.
6. I had to repeat steps 4 and 5 a few times for some reason but now Bam! its working. Hopefully the geniuses working on Likewise can get the UPSM to work and we will have a full blown S5 Rom. Awesome Job guys!
DocHoliday77 said:
You can only get ota if you are 100% full stock. No root, no mods, no custom anything.
You flash just like any other rom or mod. If you are not familiar with this, I highly recommend you don't do anything until you've read the sticky threads and searched the forums for remaining questions or concerns.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
That's very unforunate :/
I have actually flashed my phone back to the official firmware because I was on cyanogenmod at one point and didn't like it and tried to figure out if there was a way to go back to the stock rom, I had people help me on a different forum site though.
All I really want is a touchwiz rom that doesn't lag every two seconds, Samsung has too much bloat on their phones D:
There are a number of 4.3 roms you can try, and theres Likewise, TMS3KK and S3Rx built from 4.4.2.
All are great roms and you can always remove a lot of the bloat that you dont like. Likewise does have a heavier memory footprint though. But thats understandable and it still hasnt caused me any problems.
I agree with you about cm, but ive hardly ever had a single issue running on Touchwiz.
And dont take my response as not wanting to help. Im always happy to help folks out, but on xda it goes a long way with everyone if you are willing to take the time to try to help yourself first. Thats why I suggest reading the stickies. It can be a lot, but theres a lot of great info there that can help you on many ways.
Sent from my SGH-T999 using Tapatalk
I'm thinking about downloading the xposed installer but I'm scared of the word soft brick lol I've soft bricked my phone once and it took days to get it back has anyone soft bricked their phone downloading the xposed installer?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
On the 10 24 build I'm getting settings fc when booting and changing clock color and changing ringtone I did clean flash and wiped everything any
Ideas
S Health Pedometer
Has anyone been able to make this pedometer for S Health actually work? I cannot get it to count steps. It's always at 0 no matter how far I walk. And yeah its not on pause. Any help would be appreciated.
No mms (net10)
Hey Developers!
I have Problems with the Rom (No MMS).. I configure the APN and Nothing..
Thanks from Puerto Rico..
Questions I would VERY much appreciate answers to
DocHoliday77 said:
There are a number of 4.3 roms you can try, and theres Likewise, TMS3KK and S3Rx built from 4.4.2.
All are great roms and you can always remove a lot of the bloat that you dont like. Likewise does have a heavier memory footprint though. But thats understandable and it still hasnt caused me any problems.
I agree with you about cm, but ive hardly ever had a single issue running on Touchwiz.
And dont take my response as not wanting to help. Im always happy to help folks out, but on xda it goes a long way with everyone if you are willing to take the time to try to help yourself first. Thats why I suggest reading the stickies. It can be a lot, but theres a lot of great info there that can help you on many ways.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
A few more questions, what do you mean by "stickie"?
And I noticed you have a "light" version of the ROM, but there's two different ones, what's the difference between them?
Also, in the regular rom the google drive link doesn't work, and the other link you have has multiple download links inside it, is it just the top one?
What do you mean by "4.3 modem and bootloader?" And how can I check if I have these things? Will it work if my phone is already at stock 4.4.2?
Is this rom compatible with Samsung Kies? I am asking because I need it to restore all my data if I manage to flash this successfully
Last question, would you recommend this rom as a daily driver? Also, whenever you release a new version, do I download it like any other software update? Where I can do it in the phone itself without any hassle?
Hello. On the latest version 4.4 is there a way to add screen shot to the power menu? Also awesome job on 4.4!!
bigfoot.kom said:
Hello. On the latest version 4.4 is there a way to add screen shot to the power menu? Also awesome job on 4.4!!
Click to expand...
Click to collapse
I've added it with GravityBox [KK].
MMS Not working
S0T0MAY0R said:
Hey Developers!
I have Problems with the Rom (No MMS).. I configure the APN and Nothing..
Thanks from Puerto Rico..
Click to expand...
Click to collapse
Sometimes you have to use another msg app like Gosms pro. is the one I use and it works fine
I have a tmo note 10.1 2014. Are any of these lte roms compatible at all??
Why yes they are I'm running xKat 5.0, SE permissive stock kernel, and TWRP (and have been since the night I got that tablet a week or so ago). SO glad that T-Mobile is carrying this hardware, AND that they're generally cool with rooting / modding etc. I even told the guy at the Tmo store my "policy" that I WILL NOT buy (well, much more trade in this case :good: ) any device that has arbitrary restrictions preventing me from gaining root (i.e. the ability to administer my own device.) He was ridiculously cool... even told me he was pretty sure it was cool if I flashed custom firmware on my new completely gratis "cellspot" router if I restored it to stock before I returned it (or likely will end up buying). SO glad Tmo is making all of these pro-consumer moves... and also that it seems to be working out for them so well (not to mention, their customers)!
I've read some of your posts around here. You mention removing a few files before flashing. Did you? If so, can share with me what/how you did?
Sent from my SM-P607T using XDA Premium HD app
No, I didn't... as you've probably noticed, info re: the entire process of root, recovery, custom ROM is kind of spread out around the forum. I thought that might be necessary because I recalled reading something about having to do that to flash a p605 ROM on a p607t (might have pertained to a specific ROM or something), but I asked specifically in the xKat thread to make sure and found it (well, first by just trying it - then took a look at the thread mid flash and saw that someone had responded :good that the xKat zip can be flashed as-is. Select any options you'd like in the Aroma installer and you're good to go! (You do need to flash an additional file after at least one reboot - otherwise you'll need to enter your wifi pass after each reboot... it's the OP of the ROM thread).
I can only say for certain that xKat w/ SE permissive kernel works great on the 607t... I think any p605 ROM can actually just be flashed without modification (hopefully someone will chime in and correct me if that isn't true - I think the info about modifying zips was just speculation, but was found not to actually be the case). Just make sure to make a nandroid of the stock ROM before flashing
How are you liking the new tablet? Loving it here! I hope now the T-mobile is selling it (by far the best of their Android tablets), this device will gain back some popularity that it lost from the TabPro release a few months later. Perhaps the forum will liven up a bit
I absolutely love this tablet. Im coming from a Nexus 10 and although they share the same screen resolution, this one is much faster, sleeker, brighter, and I'm loving the S pen. I had it rooted ten minutes after i brought it home. I've also recovered from a soft brick after having flashed the wrong twrp. Woops! Ive been dying to try different rom on this bad boy, hence all the questions for you. I'm gonna give xkat a go here. I'll report back to you with my results!
Sent from my SM-P607T using XDA Premium HD app
Nice man! Feel free to PM me if you get stuck anywhere along the way
BTW: Something I just learned, even if you select the SE permissive kernel, your kernel will be enforcing unless you manually change it, either via terminal or that SElinux Changer app (forgot exactly what it's called). I had been confused re: why in "About device" it said that the kernel was SE enforcing even though I installed the permissive one. Just FYI
Does spen work on xkat anybody revert successfully and gain the function back?
Neozx25 said:
I absolutely love this tablet. Im coming from a Nexus 10 and although they share the same screen resolution, this one is much faster, sleeker, brighter, and I'm loving the S pen. I had it rooted ten minutes after i brought it home. I've also recovered from a soft brick after having flashed the wrong twrp. Woops! Ive been dying to try different rom on this bad boy, hence all the questions for you. I'm gonna give xkat a go here. I'll report back to you with my results!
Sent from my SM-P607T using XDA Premium HD app
Click to expand...
Click to collapse
Hi, I have this tablet as well I've been on this build ne2 since I got it, & rooted it with towelroot but can't for some reason update I trying to update to the latest version that cam yesterday ota but it keeps failing can u help me please pm me
Ok, I'll start off by saying that I have searched around, but haven't been able to find a definitive and up-to-date answer. Either that, or I just didn't understand an answer because I know almost nothing about any of the technical jargon.
Here's my problem. I just got a new Sprint Note 4 and it unfortunately came with 5.1.1 already loaded, so I didn't have a choice. I've seen the difference between Lollipop and Kitkat (and read numerous complaints), so I know that I would definitely prefer to be running Kitkat. And if there's any way to downgrade for 4.4.4, I'd like to do it now while the phone is new so I wouldn't have to worry about backing up a lot of data.
Useful information: the phone is an SM-N910P and is on N910PVPU4COG5, which I believe is the latest version.
Is there currently any known method--non-root, rooting, flashing, going to 5.0 and then to 4.4.4, etc.--to downgrade a Sprint Note 4 on COG5 to Kitkat? And if so, where does a laymen like myself start?
Thanks a lot.
bastienfils said:
Ok, I'll start off by saying that I have searched around, but haven't been able to find a definitive and up-to-date answer. Either that, or I just didn't understand an answer because I know almost nothing about any of the technical jargon.
Here's my problem. I just got a new Sprint Note 4 and it unfortunately came with 5.1.1 already loaded, so I didn't have a choice. I've seen the difference between Lollipop and Kitkat (and read numerous complaints), so I know that I would definitely prefer to be running Kitkat. And if there's any way to downgrade for 4.4.4, I'd like to do it now while the phone is new so I wouldn't have to worry about backing up a lot of data.
Useful information: the phone is an SM-N910P and is on N910PVPU4COG5, which I believe is the latest version.
Is there currently any known method--non-root, rooting, flashing, going to 5.0 and then to 4.4.4, etc.--to downgrade a Sprint Note 4 on COG5 to Kitkat? And if so, where does a laymen like myself start?
Thanks a lot.
Click to expand...
Click to collapse
Not possible.
http://forum.xda-developers.com/showthread.php?p=62923032
pcmanager said:
Not possible.
http://forum.xda-developers.com/showthread.php?p=62923032
Click to expand...
Click to collapse
+1 Way too many risks trying to downgrade. There was a way mentioned to flash any Lollipop ROM but I doubt it applies to KitKat.
Give Lollipop 5.1.1/OG5 a chance. It's got some security and bug fixes the other stock versions and ports don't have. There's even some ports like themes and Screen Off Memo that work with it. And Xposed works as well.
Development is coming along. Read the thread on Sacs Note 5 port for fixes fixes posted in the last 2 or 3 days for that ROM. (HINT: Before flashing, go into the zip archive to delete the test files in /system/etc/init.d and pull the build.prop and look for dpi and set it at 640 and replace it). That will get you started with a good custom ROM that should only get better going forward. I can't recall but I think was still yet another another fix posted in that thread.
Stock OG5 with Beastmode kernel is no slouch if you can get it setup to counter the issues from applying just root.
Sent from my SM-N910P using Tapatalk
samep said:
+1 Way too many risks trying to downgrade. There was a way mentioned to flash any Lollipop ROM but I doubt it applies to KitKat.
Give Lollipop 5.1.1/OG5 a chance. It's got some security and bug fixes the other stock versions and ports don't have. There's even some ports like themes and Screen Off Memo that work with it. And Xposed works as well.
Development is coming along. Read the thread on Sacs Note 5 port for fixes fixes posted in the last 2 or 3 days for that ROM. (HINT: Before flashing, go into the zip archive to delete the test files in /system/etc/init.d and pull the build.prop and look for dpi and set it at 640 and replace it). That will get you started with a good custom ROM that should only get better going forward. I can't recall but I think was still yet another another fix posted in that thread.
Stock OG5 with Beastmode kernel is no slouch if you can get it setup to counter the issues from applying just root.
Sent from my SM-N910P using Tapatalk
Click to expand...
Click to collapse
Now, see, I don't really understand a portion of what you just said. But I get the tone of what you're saying and I appreciate the help anyway. : P
bastienfils said:
Now, see, I don't really understand a portion of what you just said. But I get the tone of what you're saying and I appreciate the help anyway. : P
Click to expand...
Click to collapse
In that case, I highly recommend Hybrid X 3.0
The stock ROMs require a little attention. If you want to go with stock, I can send you a carbon copy of a PM I just sent to another user.
Sent from my SM-N910P using Tapatalk
I have purchased yet another note 4 for the grandson. His firmware is QI15. Original plan was for me to use it, but since my Pixel 3a XL is still yet a lease I might as well use it. Plus it is a lot faster anyway.. His mother does not have the money to buy one for him, so I figured what the hell, he can have it.Which roms can he use.. I no longer have mine, but will root this if it is still possible.. From reading you can't downgrade from MM to LL. But can you downgrade to a earlier version of MM? Thanks.
inYes, that is correct but also cant downgrade the bootloader/modem. That is because of fused 5, binary 4. and te old official stock 5DQ15 .tar md5 can be fashed via Odin. Any other stock firmware below that has a fused 4 and flashing will result in a bricked device.
If your already on 5DQ15 and wish to flash customer roms then use TWRP and make a back up of all partitions to external sd. The any custom rom for Sprint Note 4 (sm-n910p) on Marshmallow are/should compatible. Basically, follow the instructions provided by the rom developer but do not flash a different bootloader or modem. Other than that follow all other institution. For best results, start in setting , sustem update and turm of automatic updates then update PRL and Profile beforehand. Developer Option and usb debugging enabled.
Rooting the Sprint Note 4 on 5DQ15 still possible? Yes 100% SuperSu or Magisk are the preferred root methods.
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
[/COLOR]https://forum.xda-developers.com/no...are-customizations-mods-roms-kernels-t3960353
Also recommend you start with a stock deodexed rom as a base before flashing other custom roms. Rom only
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
or
https://forum.xda-developers.com/note-4-sprint/development/rom-t3568075
then reboot and give it time to properly set up set up. Check if hotspot is visible setting and check your apn settings. If all looks good and it should the return to TWRP and once again make a back up and rename (2019-10-05-deodexStockNoroot.....) so not to be mistaken with any other backups. After that flash root .zip and/or a custum rom of you choice.
I use the BeastMod r61 kernel by Freeza on a N4 Dtux V9 Legend rom. Fixed issues with network connection.
https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051
Mr. JAVI said:
inYes, that is correct but also cant downgrade the bootloader/modem. That is because of fused 5, binary 4. and te old official stock 5DQ15 .tar md5 can be fashed via Odin. Any other stock firmware below that has a fused 4 and flashing will result in a bricked device.
If your already on 5DQ15 and wish to flash customer roms then use TWRP and make a back up of all partitions to external sd. The any custom rom for Sprint Note 4 (sm-n910p) on Marshmallow are/should compatible. Basically, follow the instructions provided by the rom developer but do not flash a different bootloader or modem. Other than that follow all other institution. For best results, start in setting , sustem update and turm of automatic updates then update PRL and Profile beforehand. Developer Option and usb debugging enabled.
Rooting the Sprint Note 4 on 5DQ15 still possible? Yes 100% SuperSu or Magisk are the preferred root methods.
---------- Post added at 08:42 AM ---------- Previous post was at 08:16 AM ----------
[/COLOR]https://forum.xda-developers.com/no...are-customizations-mods-roms-kernels-t3960353
Also recommend you start with a stock deodexed rom as a base before flashing other custom roms. Rom only
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
or
https://forum.xda-developers.com/note-4-sprint/development/rom-t3568075
then reboot and give it time to properly set up set up. Check if hotspot is visible setting and check your apn settings. If all looks good and it should the return to TWRP and once again make a back up and rename (2019-10-05-deodexStockNoroot.....) so not to be mistaken with any other backups. After that flash root .zip and/or a custum rom of you choice.
I use the BeastMod r61 kernel by Freeza on a N4 Dtux V9 Legend rom. Fixed issues with network connection.
https://forum.xda-developers.com/note-4-sprint/development/rom-updated-1-14-2017-t3538051
Click to expand...
Click to collapse
you know what sucks, my last note 4 for Sprint hell I was able to downgrade from marshmallow to lollipop. But since this is for the grandson I guess it really doesn't matter I'll put something on there good for him and leave it at that
doubledragon5 said:
you know what sucks, my last note 4 for Sprint hell I was able to downgrade from marshmallow to lollipop. But since this is for the grandson I guess it really doesn't matter I'll put something on there good for him and leave it at that
Click to expand...
Click to collapse
I 100% agree that not being able to downgrade sucks big time. I hear all the hipe about new Android OS updates but there are advantages of older versions. In 2018, I searched for a replacement with a lower bootloader but simply couldn't find one. Knowing that peope were bricking there device and Odin fails I decided to get one in fair condition. Being the type to mod and flash yet unsure of what ir how to do that as custom roms are specific to bootloader and modem. I figured, I'll practice with a cheap on incase I hard brick. At the time there didnt seem to be specific information on what rom worked with 5DQ15. I started out with Stockist Plus tidbits Q15. My old Note 4 was on [MOAR v2.1] [ULTIMATE Note5 Hybrid] on lollipop 5.1.1. and had lost of customizations prebuild. So going from the Mother Of All Roms (MOAR) on lollipop to Stockish Q15 on marshmallow, just sucked. It didnt take long before I started taking calculated risks with flashing and porting, even from other models and variations. Stepping out side the box but within boundaries. For instance, the n910f is an international version but much of its software is compatible with the n910p. For instance, this one works on n910p with most stockish roms on Sprint Note 4. With Custum roms it may conflict depending on the setting. If stockish rom or custom rom come with a "rom control"app (interface) and .zip in the link bellow come with "rom control" app thin it is not compatible. One cool feature is it adds "multiple user" in setting.
https://forum.xda-developers.com/note-4/themes-apps/utility-rom-control-note-4-stock-roms-t3586944
These n910f worked for me and has the advantage of separate .zips moding specific parts but warn that one of these .zip in the link , I believe its the "settings theme" .zip when flashed removes "hotspot" from the settings. Just 6.0mm zips are compatible on dq15 n010p.
https://forum.xda-developers.com/note-4/themes-apps/theme-customize-galaxy-note-4-n910f-t3017621
The GRX is one of my favorites for stockish roms. It can be compatible with custom roms but its a complicated process. Im guessing it should work with the N7 hybrid rom. Its relatively easy and offers nice smooth customizations. Its a good idea to chech the setting of both settem and "setting GRX" as to avoid conflict. If you find it on XDA even better. For me, I find it to be the best thing on 6.0mm.
https://www.google.com/amp/s/androidfit.com/grx-touchwiz-mod-v8-apk-for-any-samsung/amp
And the PK1 hotspot mod will work as long as the hotspot is in the main settings.
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
Good luck to you and your grandson rooting and moding.
Mr. JAVI said:
I 100% agree that not being able to downgrade sucks big time. I hear all the hipe about new Android OS updates but there are advantages of older versions. In 2018, I searched for a replacement with a lower bootloader but simply couldn't find one. Knowing that peope were bricking there device and Odin fails I decided to get one in fair condition. Being the type to mod and flash yet unsure of what ir how to do that as custom roms are specific to bootloader and modem. I figured, I'll practice with a cheap on incase I hard brick. At the time there didnt seem to be specific information on what rom worked with 5DQ15. I started out with Stockist Plus tidbits Q15. My old Note 4 was on [MOAR v2.1] [ULTIMATE Note5 Hybrid] on lollipop 5.1.1. and had lost of customizations prebuild. So going from the Mother Of All Roms (MOAR) on lollipop to Stockish Q15 on marshmallow, just sucked. It didnt take long before I started taking calculated risks with flashing and porting, even from other models and variations. Stepping out side the box but within boundaries. For instance, the n910f is an international version but much of its software is compatible with the n910p. For instance, this one works on n910p with most stockish roms on Sprint Note 4. With Custum roms it may conflict depending on the setting. If stockish rom or custom rom come with a "rom control"app (interface) and .zip in the link bellow come with "rom control" app thin it is not compatible. One cool feature is it adds "multiple user" in setting.
https://forum.xda-developers.com/note-4/themes-apps/utility-rom-control-note-4-stock-roms-t3586944
These n910f worked for me and has the advantage of separate .zips moding specific parts but warn that one of these .zip in the link , I believe its the "settings theme" .zip when flashed removes "hotspot" from the settings. Just 6.0mm zips are compatible on dq15 n010p.
https://forum.xda-developers.com/note-4/themes-apps/theme-customize-galaxy-note-4-n910f-t3017621
The GRX is one of my favorites for stockish roms. It can be compatible with custom roms but its a complicated process. Im guessing it should work with the N7 hybrid rom. Its relatively easy and offers nice smooth customizations. Its a good idea to chech the setting of both settem and "setting GRX" as to avoid conflict. If you find it on XDA even better. For me, I find it to be the best thing on 6.0mm.
https://www.google.com/amp/s/androidfit.com/grx-touchwiz-mod-v8-apk-for-any-samsung/amp
And the PK1 hotspot mod will work as long as the hotspot is in the main settings.
https://forum.xda-developers.com/no...tock-deodexed-debloated-pk1-12-11-16-t3517454
Good luck to you and your grandson rooting and moding.
Click to expand...
Click to collapse
your in-depth detail of what works good for this phone with this particular bootloader is much appreciated thanks.
doubledragon5 said:
your in-depth detail of what works good for this phone with this particular bootloader is much appreciated thanks.
Click to expand...
Click to collapse
Thank you and your welcome, happy to help
doubledragon5 said:
your in-depth detail of what works good for this phone with this particular bootloader is much appreciated thanks.
Click to expand...
Click to collapse
If you install Busybox with the N7 hybrid kernel I offer a suggestion.
Busybox by Stephen (Stericson)
I never installed the Dr. Ketan rom but I did look at the Touchwiz launcher provided in the .zip and it is a MM. Dont know why you got FC's . Most likely its our latest firmware that to blame.
Wish I could remember what it was I flashed to get that in my settings as I think I remember you wanted that feature.