Develop Bugs

Firmware upgrade encountered an issue Galaxy S3 (Sprint)

Hello all:
First I let me apologize for being a noob at this.
I had my my S3 for a month and I rooted myself 2 weeks ago. I'm having some issues now and I'm wondering if you guy and gals can help me?
Right now my phone has a screen up that says "Firmware upgrade encountered an issue. Please selected recovery mode in Kies & try again."
The top left of the phone says this:
ODIN MODE
PRODUCT NAME: SPH-L710
CUSTOM BINARY DOWNLOAD: Yes (5 counts)
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
QUALCOMM SECUREBOOT: Enable
Could someone please help me with this issue, maybe walk me through step by step. I already have Odin 3.04 downloaded and I don't know what to do to fix it.

You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer

joeyhdownsouth said:
You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer
Click to expand...
Click to collapse
yuuup, what JoeyD said...flash a custom rom that'll solve your problems...

Naddict said:
yuuup, what JoeyD said...flash a custom rom that'll solve your problems...
Click to expand...
Click to collapse
I guess i didn't finish my explanation, I should have said to use toolbox to flash a stock rom, since he don't have alot of knowledge of standalone ODIN or download mode:what:
this message brought to you by my GalaxyS3 running Phantom's Blazer

joeyhdownsouth said:
You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer
Click to expand...
Click to collapse
Thanks I hope it works for me. Just one question (again sorry, I'm a first timer)
All I have to do is hook my phone up to my computer then download the toolkit or what?

CrooklynMayoKMJr said:
Thanks I hope it works for me. Just one question (again sorry, I'm a first timer)
All I have to do is hook my phone up to my computer then download the toolkit or what?
Click to expand...
Click to collapse
yuup, you got it...

joeyhdownsouth said:
You accepted on OTA while being rooted, correct? Never allow OTA updates while rooted, most custom roms block this for you, but stock rooted will allow OTA updates. You can try this toolbox, super simple, ODIN built in, puts your phone in download mode for you. BE SURE TO PICK SPRINT VERSION!
http://forum.xda-developers.com/showthread.php?t=1746680, Personnaly when I rooted, I deleted all Samsung apps, kies causes alot of problems IMO.
this message brought to you by my GalaxyS3 running Phantom's Blazer
Click to expand...
Click to collapse
i didnt try to update OTA but i was trying to use ODIN to put a stock ROM back on and now im in a simular situation, i can get into download mode, i can get pretty far on the ODIN update but it always fails in the end
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_L710VPALEN_L710SPRALEN_618049_REV03_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> sbl2.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl3.mbn
<ID:0/005> aboot.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> __XmitData_Read ..
<ID:0/005> XmitData Fail..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and i can't get my phone to load. i have the GS3 tookit, but i dont know what im supposed to do to get my phone back up. if you could help id appreciate it alot.
oh and i seem to be able to get into system recovery and download mode but can't seem to figure out what to do with it. when i try to use the GS3 options it doesnt go pass the "waiting for USB debugging to be enabled" which i can't do becaue it wont load pass the SAMSUNG logo.

hmm i dont know what i did different. i really didnt do anything different. but somehow this time around it completed and passed. waiting now to see if it reboots completely...taking a while... and it started. WOW. wtf. well thanks anyways guys =/

Sorted!
I've been searching everywhere for a solution. Stupid Samsung and their Knox and their Kies (which fixes nothing)
I finally got it sorted!
1. Pull out the battery.
2. Reinsert the battery and force the phone into Download Mode. (Yes, I'm aware that the phone is unable to go anywhere else at this point; but when I fixed mine, I did it manually so that it displayed the Android droid logo, rather than the "Firmware upgrade encountered an issue..." message.
3. By now, you've probably tried every version under the sun. Try one more. It's an Odin package with the recovery image built-in. Assuming that you already have your Samsung drivers, download the executable from Step 3 of this guide: http://forum.xda-developers.com/showthread.php?t=2755793
4. Good luck! I'm just glad I finally fixed mine. Beware the OTA!

Have I bricked my phone :( - Experts plz help!

Guys,
!!!!! N00B Alert - I am not an expert in what I am doing. Just following instructions from experts like you. I will try to be as technically articulate as possible !!!
I had recently (about a month ago) rooted my phone to install CM 10.2. I love CM.
In an attempt to unlock my phone I wanted to get back to stock ROM. So I googled and bumped into a way to do it from Kies (not sure if it was a good idea). I followed the instructions and boom the firmware initialization failed half way through. Now when I turn my phone on I get this error "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again". So I tried again multiple times but it won't work.
Then I thought may be there is another way and googled and found this thread - http://forum.xda-developers.com/showthread.php?t=2186967
Followed the instructions to the word, but I see the dreaded FAIL message in ODIN.
Below is the log. (I tried twice in one stretch).
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCDLK3_I747ATTDLK3_I747UCDLK3_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
Another thing is I am not able to get to recovery mode. When I try I can only get to the Firmware error screen I mentioned above.
Any help to get out of this mess would be great!

did you make sure you had the LK3 bootloader before trying to flash stock? if so I also had Odin fail while flashing this firmware. only one that worked for me was root66 firmware. i never booted all the way in but i read that you have to uncheck "auto restart" before flashing, once it is done pull battery and boot into recovery and factory reset. if that doesn't work you can do what I did. Odin flash cwm and install a rom from your sdcard
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

andrewjae04 said:
did you make sure you had the LK3 bootloader before trying to flash stock? if so I also had Odin fail while flashing this firmware. only one that worked for me was root66 firmware. i never booted all the way in but i read that you have to uncheck "auto restart" before flashing, once it is done pull battery and boot into recovery and factory reset. if that doesn't work you can do what I did. Odin flash cwm and install a rom from your sdcard
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks for your response.
I didnt know I have to have the LK3 bootloader, may be I missed in the instructions.
Anyway, how do I flash Clockworkmod from Odin? if I can do that I can get back to CM 10.2 and then try paying for unlock code.

http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att/philz_touch_6.07.9-d2att.tar.md5
this is what I used but it didn't work for me without first flashing root66 firmware. i will try to find that link and post it also.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

http://click.xda-developers.com/api...747UCDLK3.7z&jsonp=vglnk_jsonp_13911206638286
this is the link to root66 for att.
BEFORE YOU DO ANY OF THIS YOU ARE ON AT&T RIGHT?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app

Make sure the bootloader that's currently on your phone is not from the 4.3 OTA update. If it is, you can't use Odin to restore a stock rom, you'll have to find a AT&T 4.3 ROM based on the leaked 4.3 AT&T ROM.

andrewjae04 said:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/d2att/philz_touch_6.07.9-d2att.tar.md5
this is what I used but it didn't work for me without first flashing root66 firmware. i will try to find that link and post it also.
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Thank You!
andrewjae04 said:
http://click.xda-developers.com/api...747UCDLK3.7z&jsonp=vglnk_jsonp_13911206638286
this is the link to root66 for att.
BEFORE YOU DO ANY OF THIS YOU ARE ON AT&T RIGHT?
Sent from my SAMSUNG-SGH-I747 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes I am on AT&T.
After I read your post about flashing CWM with ODIN I researched and found a method. I tried it and it PASSED!. Then my phone restarted and boom it booted directly into CM 10.2. Not sure how, felt a bit creepy. Then I updated to latest Nightly CM 11 build and brough back all my apps and my phone has LIFE right now. Thanks for the tip! :good:

audit13 said:
Make sure the bootloader that's currently on your phone is not from the 4.3 OTA update. If it is, you can't use Odin to restore a stock rom, you'll have to find a AT&T 4.3 ROM based on the leaked 4.3 AT&T ROM.
Click to expand...
Click to collapse
May be it is, I updated to 4.3 thru OTA and after a few days rooted and installed CM 10.2. How do I check?
Then this should be the reason that ODIN didnt work for me. Which genuine source I should look at for a AT&T 4.3 ROM based on the leaked 4.3 AT&T ROM.

mr_legolas said:
May be it is, I updated to 4.3 thru OTA and after a few days rooted and installed CM 10.2. How do I check?
Then this should be the reason that ODIN didnt work for me. Which genuine source I should look at for a AT&T 4.3 ROM based on the leaked 4.3 AT&T ROM.
Click to expand...
Click to collapse
I believe if you were originally on 4.1 then you still have that bootloader. I dont think OTA updates the bootloader so you should be able to downgrade with the root66 if that is the case.

audit13 said:
Make sure the bootloader that's currently on your phone is not from the 4.3 OTA update. If it is, you can't use Odin to restore a stock rom, you'll have to find a AT&T 4.3 ROM based on the leaked 4.3 AT&T ROM.
Click to expand...
Click to collapse
when you say "find" an AT&T 4.3 rom, I wish you could give me a link. I am working with a device that was handed to me that was on 4.3 then flashed to a t999 rom. Now I cannot get it to flash ANYTHING AT&T 4.3 (and I've looked all over), neither in odin, nor in recovery, except, oddly enough it will reflash the same t999 image. The radio (modem) also no longer works.

mr_legolas said:
May be it is, I updated to 4.3 thru OTA and after a few days rooted and installed CM 10.2. How do I check?
Then this should be the reason that ODIN didnt work for me. Which genuine source I should look at for a AT&T 4.3 ROM based on the leaked 4.3 AT&T ROM.
Click to expand...
Click to collapse
This is why your flash to stock failed, lucky for you. The MJB bootloader is not downgradable and if 'successful' is bad news...aka brick, requiring serious hacking if not JTAG service to repair. As far as ROM's go as long they do not attempt to change the bootloader (none i've seen do, but you never know) the worst that could happen is a 'status 7' fail in recovery and no change to your firmware, pertaining to the bootloader that is. There are any number of other reasons why something could go wrong during the process. MJB has been around long enough most customs ROM's have probably adapted their updater-script to include it. If not there are ways around this I (and several others) have documented elsewhere. My advice moving forward, make sure to educated yourself thoroughly before attempting anything that can brick your device and if you are not sure, ask first flash later.

dmplus said:
when you say "find" an AT&T 4.3 rom, I wish you could give me a link. I am working with a device that was handed to me that was on 4.3 then flashed to a t999 rom. Now I cannot get it to flash ANYTHING AT&T 4.3 (and I've looked all over), neither in odin, nor in recovery, except, oddly enough it will reflash the same t999 image. The radio (modem) also no longer works.
Click to expand...
Click to collapse
I assume your can get into download mode. If that is the case, try flashing this in Odin: http://forum.xda-developers.com/showthread.php?t=2498233

audit13 said:
I assume your can get into download mode. If that is the case, try flashing this in Odin: http://forum.xda-developers.com/showthread.php?t=2498233
Click to expand...
Click to collapse
I had tried to flash that via odin without success. What I was able to do to fix the issue was to flash a custom recovery via odin (TWRP). Then use the custom recovery to blind flash (no signature or md5 check) the ATT modem, and then I was able to flash the link you sent. After that it still didnt boot, so i had to reboot in TWRP, dump caches, reboot again, wait, literally like 5 minutes and it came back to life. Whew, what a day.

[Q] AT&T SGH-I747 Soft Brick Need Help!!!

I need help recovering my GS3, i tried using CF auto root to root my phone and i guess it didnt work because my phone doesnt boot past the samsung screen. I didnt have any custom recovery installed so i dont believe and thing was backed up. I am able to get into download mode and recovery mode. I tried flashing stock firmware using kies but it encounters a error saying its a problem with my phone, I tried using odin but it also gives me an error when flashing firmware saying
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
What do I do to fix my phone?

FuTuRisTiC Zo3 said:
I need help recovering my GS3, i tried using CF auto root to root my phone and i guess it didnt work because my phone doesnt boot past the samsung screen. I didnt have any custom recovery installed so i dont believe and thing was backed up. I am able to get into download mode and recovery mode. I tried flashing stock firmware using kies but it encounters a error saying its a problem with my phone, I tried using odin but it also gives me an error when flashing firmware saying
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> root66_ATT_I747UCDLK3.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
What do I do to fix my phone?
Click to expand...
Click to collapse
Ok I Installed Insecure Boot img via odin3 and my phone rebooted but now instead of it booting at the 1 second samsung screen it goes past it to the galaxy s 3 screen and just sits there. i also installed twrp, it let me mount everything but i cant u adb to push anything and it says i have no os installed. i dont know what moves to make anymore someone please help me out!!!

What version of Android did you have on your phone when it last worked, stock or custom ROM?

dawgdoc said:
What version of Android did you have on your phone when it last worked, stock or custom ROM?
Click to expand...
Click to collapse
its was a stock android rom i believe im not sure what version though.

Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time

lemngo02 said:
Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time
Click to expand...
Click to collapse
yes im able to go into download and recovery mode

lemngo02 said:
Are you still able to get it into download mode?
Press and hold volume down + home + power at the same time
Click to expand...
Click to collapse
oops didnt fully read your 1st post

lemngo02 said:
oops didnt fully read your 1st post
Click to expand...
Click to collapse
thats koo but the problem is i dont think my phone is rooted, i cant adb push using twrp cause my device wont show up when i adb devices

If you had the 4.3 bootloader on your phone, you cannot use Odin to flash a stock ROM.
Were you running the stock AT&T 4.3 ROM?

FuTuRisTiC Zo3 said:
thats koo but the problem is i dont think my phone is rooted, i cant adb push using twrp cause my device wont show up when i adb devices
Click to expand...
Click to collapse
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.

dawgdoc said:
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.
Click to expand...
Click to collapse
ok, not to jack his thread, but what if you are on the 4.3 bootloader? i didnt do what he did, but i am stuck in a similar situation. I am on the 4.3 bootloader, but i do have a custom recovery installed. problem is i get an error when i try to wipe. Ive tried flashing stock 4.3 rom via sideload in stock recovery, and modified rom though twrp. both roms install fine, but dont boot, but they do freeze in different points so i know something is being flashed. ive also tried wiping in cwm and stock. im bout ready to flash anything to this phone. oh and a nandroid restore fails after boot img flashes.

FuTuRisTiC Zo3 said:
its was a stock android rom i believe im not sure what version though.
Click to expand...
Click to collapse
From your message, you likely were on stock 4.3. Since you are able to get into recovery and download modes, you may try a restore via custom recovery. Please see the thread below on how to install custom recovery and do a stock restore ...
<http://forum.xda-developers.com/showthread.php?t=2658486>

fastludeh22 said:
ok, not to jack his thread, but what if you are on the 4.3 bootloader? I am on the 4.3 bootloader, but i do have a custom recovery installed.
Click to expand...
Click to collapse
I would then link you to the same thread Larry2999 provided.

dawgdoc said:
I would then link you to the same thread Larry2999 provided.
Click to expand...
Click to collapse
thanks. i had found that thread right after i posted. lets hope. its halfway downloaded. if that doesnt work,ill be posting a thread about the weird way i ended up here and detailed report of what i did and what ive tried...

dawgdoc said:
Based on your Odin printout in the first post you were flashing a modified 4.1.1 kernel to install root. This should be fine if you were on either the 4.1.1 or 4.1.2 stock ROM. If you were on the 4.3 stock ROM your root attempt is probably the source of the problem.
IMPORTANT How to proceed from here depends on if you were on 4.3 or an earlier version of stock.
Also, since this forum is for AT&T and Canadian variants; I see the title of the first post says i747 - is this correct? It matters.
Click to expand...
Click to collapse
audit13 said:
If you had the 4.3 bootloader on your phone, you cannot use Odin to flash a stock ROM.
Were you running the stock AT&T 4.3 ROM?
Click to expand...
Click to collapse
Yes the phone is AT&T and more than likely it was on 4.3 now what do i do

never mind folks i got it up and running my only option was to use the sd card so i found my adapter and fixed it. im on 4.1.2 now its updating software now im guessing to 4.3. thank you guys for all the help

FuTuRisTiC Zo3 said:
Yes the phone is AT&T and more than likely it was on 4.3 now what do i do
Click to expand...
Click to collapse
Before doing anything else, boot into recovery. If you are on a stock recovery the very first line will tell you that the system recovery is 3e
If you have one of the custom recoveries it will be different. If you have one of the custom recoveries, TWRP or CWM, you can use the link Larry299 posted earlier in this thread to restore your phone. If you are on the stock recovery and the 4.3 bootloader I don't know what to suggest.

dawgdoc said:
Before doing anything else, boot into recovery. If you are on a stock recovery the very first line will tell you that the system recovery is 3e
If you have one of the custom recoveries it will be different. If you have one of the custom recoveries, TWRP or CWM, you can use the link Larry299 posted earlier in this thread to restore your phone. If you are on the stock recovery and the 4.3 bootloader I don't know what to suggest.
Click to expand...
Click to collapse
I got everything back to normal im rooted on 4.1.2 and have a pending up date, is it safe for me to update via software updater or do i have to do something else

FuTuRisTiC Zo3 said:
I got everything back to normal im rooted on 4.1.2 and have a pending up date, is it safe for me to update via software updater or do i have to do something else
Click to expand...
Click to collapse
There is a chance that being rooted will prevent you from using the OTA official update. I've seen reports of people being able to update to the official 4.3 while rooted, but I've also seen reports of people not being able to update.
Before you make that update, bear in mind that the official 4.3 bootloader, its name ends in MJB, is the one that will prevent you from ever going back to an older bootloader. Some of the devs and the more experienced on here have no problem with that. Others do consider it an issue. An alternative is to install the leaked 4.3 bootloader, it's name ends in MJ2. That bootloader will allow you to downgrade to the 4.1.1 or 4.1.2 bootloaders, or so I have read. There is information about this in the development and the general forums for our device.
To muddy the waters more; if you intend to sim unlock your device without gettings codes from your carrier you need to do it from the 4.1.1 official ROM. A point you can not return to from the official 4.3 ROM, or so I've read.

I am having a huge booting issue with my Samsung Galaxy S3. Its a brand new one and I tried rooting it but it gave me this error:
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> cache.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I can get to download mode, but not recovery nor does it boot into the Android OS. I tried putting back the stock OS and it gave me this error:
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I've tried follow a bunch of these threads, but I can't seem to resolve my issue yet. I probably have that 4.3 bootloader which screwed everything up. Can someone help me resolve my issue? I literally got this phone today from AT&T. Thank you.

[Q] [Help] Flashed stock ROM via ODIN, hangs at T-Mobile splash screen

Need to warranty my Note 3 due to hardware camera problem. I unlocked my factory 4.3 bootloader, installed TWRP, and went to W03 Slim 8.5. I have never ran the official 4.4.2 update which I believe implies my bootloader is still the 4.3 version.
I launched ODIN 3.07, and flashed the N900TUVUBMI7 rom from this page: AndroidRootz
Everything appears to have ran in ODIN successfully:
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N900TUVUBMI7_N900TTMBBMI7_N900TUVUBMI7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl1.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> aboot.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> modem.bin
<ID:0/004> cache.img.ext4
<ID:0/004> RQT_CLOSE !!
<ID:0/004> RES OK !!
<ID:0/004> Removed!!
<ID:0/004> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
The phone boots up with no warnings on the Samsung splash and then gets to the white T-Mobile 4G LTE splash and just hangs there. I've tried reflashing the firmware from ODIN with the same result.
What should I do? Should I flash up to the 4.4.2 version? The phone is going back regardless so I don't care about anything other than getting this to boot up so I can exchange it.

Tried from ODIN 3.09 with the same result. I have the 4.4.2 firmware but I am hesitant to flash it until someone can shed some light on this issue.

negativefx said:
Tried from ODIN 3.09 with the same result. I have the 4.4.2 firmware but I am hesitant to flash it until someone can shed some light on this issue.
Click to expand...
Click to collapse
Try wiping /data or a factory reset in recovery.

Have you tried re-downloading the 4.3 firmware. Sometimes this can happen from a bad download.

Shawn said:
Try wiping /data or a factory reset in recovery.
Click to expand...
Click to collapse
You read my mind... Just read that an ODIN firmware flash doesn't wipe. Booted to recovery, did a wipe data from recovery and rebooted. Works like a champ. Thanks!

happened to almost everyone, I had to odin v3.09 and run 2 times... the 1st time it said it was successful, but stuck at the Samsung screen, the 2nd time booted up just fine..
on my link I have odin and the new firmware, old firmware my stock not rooted roms... all u need for my stock not rooted is chainfire superuser app, then download busybox, your done,
look on my signature for any files needed, also uploading the Samsung driver.. no kies needed.

negativefx said:
You read my mind... Just read that an ODIN firmware flash doesn't wipe. Booted to recovery, did a wipe data from recovery and rebooted. Works like a champ. Thanks!
Click to expand...
Click to collapse
No problem, I used to forget to wipe when I put my phones back to stock with Odin.

I'm currently running an AOSP rom 4.4.2...what are the steps to flash the 4.3 stock rom touchwiz??

4.4.2 is out? newest firmware available atm is nk3 4.4.2
anyway
1. d/l firmware file from sammobile.com
2. boot to download mode
3. run odin and plug phone into pc(if you have a mac your on your own from here as i have a pc and not a mac)
4. load file you just d/led(in tar.md5 format) into the pda slot(i'm assuming you have odin 3.07)
5. click start and wait to profit.
you can also d/l 4.3 firmware from same site if you really want it.
good luck

I meant I have a AOSP custom rom its regular google not touchwiz
Sent from my SM-N900T

right. thats how you restore stock touchwiz though. it's pretty simple.

will I lose root?..so if I have this current baseband which is MI7..does that mean that I still have 4.3 bootloader?
Sent from my SM-N900T

yeah you will lose root. but you can reroot it afterwards. and yes if you flash the 4.3 firmware it'll keep the 4.3 bootloader or should anyway. might want to wait on someone else to chime in here on the bootloader and baseband though as i am not really sure. i just upgraded from a note 2 to my note 3. and i run nk3 on my note 3. it's fine with all the roms i have tryed so far though. no issues at all.

I'll wait a lil bit cause someone just told me that since I'm on 4.4.2 custom aosp rom I won't be able to revert back to 4.3 Touch wiz
Sent from my SM-N900T

i'd just go with the nk3 firmware. it's 4.4.2 stock touchwiz. works great. but thats me. hehe

this is my android version and that is my baseband..im soo confused
View attachment 3079890
Sent from my SM-N900T

ok. your baseband and bootloader are 4.3, but your custom rom is a 4.4.2 rom. if you install the nk3 firmware. you'll have stock touchwiz 4.4.2 with the nk3 baseband and bootloader along with the csc file. and a bunch of otherstuff. it will all be upgraded. instead of having a custom 4.4.2 rom you'll be on the newest stock touchwiz version which is nk3.
nk3 can be rooted. you can install a custom recovery and still reinstall custom roms.
if that makes sense.

that's wat I was looking for, thanks dude..this is my version of ODIN that I have..this is what I used to root the phone when I first got it last year
View attachment 3079899
Sent from my SM-N900T

1.8.5 will work. been so long since i seen that version. just add the tar.md5 file to the pda slot. click start and profit

is it better to upgrade ODIN to tge latest version or just stick with 1.85?
Sent from my SM-N900T

[Q] Might have bricked (Firmware upgrade encountered an issue) Can get to bootloader

Okay I have been having issues galore trying to update my Sprint SPH-L900 to the new 4.4. Mainly unexpected errors package when trying to install. Already wiped cache and factory resetted. Still on 4.3 I hope now Kies3 will be able to help. Sunofabit KIES CRASHES AND NOW I AM STUCK ON FIRMWARE UPGRADE ENCOUNTERED AN ISSUE! I can still get into bootloader thankfully. Trying to flash back to 4.3 or 4.1.2 gives me a sboot.bin fail on Odin.
I also tried a second computer with Kies 3 to upgrade firmware initialization and it just sat there with Kies dimmed the whole freaking night! It'll say it's downloading the necessary things to do it and then it just sits there with Kies dimmed.
I have no idea what to do What should I do from here??
Any help here please greatly appreciated!

Looks like you will have to wait for the official tar from sprint. If you can get a custom recovery flashed via odin then you will be able to run custom roms till the tar is released.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Looks like you will have to wait for the official tar from sprint. If you can get a custom recovery flashed via odin then you will be able to run custom roms till the tar is released.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
What would be a good custom recovery/custom rom I can get real quick if you can help??

http://goo.im/devs/philz_touch/CWM_Advanced_Edition/l900
use version 6.07.9
1. open odin (recommend 1.85) and uncheck reboot option then click pda and select file
2. boot phone into download mode and connect to pc
3. flash file from odin
4. disconnect phone from pc and remove battery
5. while holding vol +, home key, power key insert battery (just to make sure it boots into recovery)
6. flash whatever rom you want aosp or touchwiz

<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L900VPUBMK4_L900SPTBMK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sboot.bin once again is what it gets stuck on

No flash the linked recovery only. Download 6.07.9 with the md5 extension.
Sent from my SPH-L900 using XDA Premium 4 mobile app

I am in recovery now!
That's one step closer to where I want to be, thank you again

Now just flash a custom rom. If you want stock 4.4.2 I have that too. I would even hook you up with my S5ish tester version if you want.
Sent from my SPH-L900 using XDA Premium 4 mobile app

jlmancuso said:
Now just flash a custom rom. If you want stock 4.4.2 I have that too. I would even hook you up with my S5ish tester version if you want.
Sent from my SPH-L900 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hi, im having similar issues and i tried your method above, with odin 1.85 and i cant get past the bootloop (samung logo) screen. I am relatively new to this and was on stock MK4 and flashed the 4.4.2 OTA file that was posted on XDA because i was too impatient to wait for the OTA. After flashing the 4.4.2 file, i decided i was going to go back to Stock MC2 (Billard's file) and just wait for the OTA updates all over again, which has proved to be stupid on my part. As i was going through the process of receiving the OTA for MK4, the phone just got hung up on the Samsung logo screen and i havent been able to get it back to normal yet.
I have tried your method above, tried going back to MK4 through an Odin Tar, tried flashing TWRP, and ive gotten nowhere. Ive spent the last two days on here, researching and downloading files that have worked for others. Im at wits end.
Any advice, aside what you've described above would be very much appreciated.
Thanks in advance for anything you can do.

Samsung Bootloop After Updating to MK4
I'm also having a similar issue. I'm able to successfully flash garwyn's modified mk4 stock rom using odin, but the original tar file always fails instantly after attempting to flash sboot.bin. When the original tar file is flashed, the phone reports "Unsupported Version" in the download screen. I was able to flash the stock mk4 recovery and the twrp and philz custom recoveries, but I was not able to get into the recovery mode. The phone remains in the "Samsung Galaxy Note II" screen when trying to boot normally or get into recovery. Any help would be greatly appreciated.