Related
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
all of patch is going to samsung,another way is make a custom rom like @wulsic doing
about news Kitkat for another Samsung device is stuck on S3 (i think),cause the lastest news i read is ,new touchwhiz launcher cannot run correctly on S3 with 1 gb of ram,and we should patient cause when S3 is not have Kitkat ,and we too not have way ,cause we have 512 mb of ram
Note:
you can check the lastest firmware for fame on www.sammobile.com,and go to tab firmware
When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.
davexd97 said:
When kitkat was released there were leaks that showed that Fame might get the update because it was supposed to support mid/low -end devices, but as we can see there are no updates.. i'll never get another samsung phone again, it's just my second and it's the last.
Click to expand...
Click to collapse
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]
Laelson said:
A guy there in forum CyanogenMod is working on CM10 and 11 "I am waiting for results. Believe we will soon have android 4.4.2 for kitkat Fame patience .. boy![emoji6]
Click to expand...
Click to collapse
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:
wulsic said:
Well that guy is me lol but uhh Laelson we have some progress. The Recovery is now 6.0.4.9 and it now has support to flash kitkat based roms.
https://drive.google.com/file/d/0B1u3mnq0nstfZnVSTDZpR0JKV2M/edit?usp=sharing
It still doesnt boot but its a kernel problem i believe that we need to fix it will take some time but yh so is life:angel:
Click to expand...
Click to collapse
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?
Laelson said:
I will apply the new recovery, and as the kernel? can not use another model? or must be the fame, only modified?
Click to expand...
Click to collapse
Well i still need to make a good working kernel for the kitkat cm11 rom just be patient :angel: i also contacted somebody else who is working on almost the same thing as me but he is further so i asked for advice with the kernel since the source is also 4.1.2 or he also knows a bit wether which patches need to be applied cause it will be faster then that i need to find everything myself since i am not a real kernel dev xd.
But yeah you can try to flash it but yeah... Rom doesnt boot yet but i think before the summervacation it might boot, or yeah my summer vacation is started next week i thought or the week after idk
Here...
Laelson said:
Have long since emerged android 4.4.2 and no release for the Galaxy staff there Fame .. Help please! Some light on how to install an kitkat in Mobile?
Enviado de meu GT-S6810B usando Tapatalk
Click to expand...
Click to collapse
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
that's a custom rom from stock ?????
Dunno
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
Really, i don't know. I'm new in all this and learning every day.
Farashto said:
Really, i don't know. I'm new in all this and learning every day.
Click to expand...
Click to collapse
Im not sure but i thought the guy in the video with that rom was using cwm 6.0.4.6 so... i thought that that version wasnt able to flash kitkat roms so yh.... I want to be 100% sure so im downloading itnow since guys with bad internet connection need to download hours to get the rom and i only around 3 minutes.
EDIT: Like i thought just 4.1.2 stock rom with kitkat theme a bit and edited settings to have more features and android version was 4.4.2 it said but in the fingerprint(Also for playstore neccesary) was 4.1.2)
The guy who made the rom has based it on the Latin stock rom 4.1.2(http://terafile.co/3395503ca6cc)
Farashto said:
Use this url, is in Spanish but, easy to understand (video inside). Any trouble, i'll glad to help. Hope this helps.
galaxyfame.jimdo.com/rom-kitkat-pro-by-c-s/
Regards.
Click to expand...
Click to collapse
I had installed the Deluxe C & S.. had a few mistakes but with GAPPS, could not be updated because they were modified .. then several applications not working (google+, hangouts, among others.) that these problems still there?
Kernel for cm11 ??
andris 934 said:
Kernel for cm11 ??
Click to expand...
Click to collapse
Im still busy with the kernel to make it good working to boot to cm11
And Kitkat is supposed to support low/mid - end devices? Probably Touchwiz but that explains how Google is able to release new versions of android and make them available as updates almost immediately on nexus devices. Im making a google kitkat experience rom but since no kitkat available for our device I have to use jelly bean as base. (Techno rom) Too complete it all I need is to change status bar and boot animation. And UI if possible because I'm new to making roms and this is my first. Any help is appreciated. :laugh:
please help me...
faizauthar12 said:
that's a custom rom from stock ?????
Click to expand...
Click to collapse
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....
ayushchauhan said:
can i use s6810 rom in s6812 if not how can i use s6810 rom in s6812....
Click to expand...
Click to collapse
i think ,in this forum,you can find custom rom for S6812
I would like to to download the sensei kernel but since the download is no longer valid I can't.
So I want to ask if some of you guys have an old download, and want to upload the file and link it?
Thanks in advance
yeah i wanted to ask that too, but maybe it is dead (no longer supported or compatible)
The savior has arrived.
moglms said:
I would like to to download the sensei kernel but since the download is no longer valid I can't.
So I want to ask if some of you guys have an old download, and want to upload the file and link it?
Thanks in advance
Click to expand...
Click to collapse
I knew it someone would need it one day lol.
brownboy2050 said:
I knew it someone would need it one day lol.
Click to expand...
Click to collapse
Thank you so much!
I actually had no idea the Find 7 HAD a custom kernel.. If you don't mind my ignorance, could someone tell me with what ROMs it is compatible with and if it also works on the 7a? Thanks!!
I think its compatible to 5.0.2 roms not sure with 5.1.1 tho.
has issues with wifi etc2
I haven't tried it with lollipop but it worked perfectly in AOSP (4.4.4) ROMS. P.S: My friend had made this kernel. It was posted on XDA & OPPO Forums but since not many people thanked him it was discontinued.
brownboy2050 said:
I haven't tried it with lollipop but it worked perfectly in AOSP (4.4.4) ROMS. P.S: My friend had made this kernel. It was posted on XDA & OPPO Forums but since not many people thanked him it was discontinued.
Click to expand...
Click to collapse
yeah. works on 4.4 up to 5.0.2 aosp roms
but I wish he continued tho. oneplus one kernel is 90% identical to find 7/7s. wish more devs could make kernels and roms to this device but the lack of interest is low
Guys this kernel is alive. It back up and rolling after a long time.
This is the thread:http://forum.xda-developers.com/fin...-kernel-r1-t3196306/post62727434#post62727434
Please show support and test this kernel and review it. Thank you.
Hi guys. I have bad network reception on my N900T after upgrade to 5.0 Lollipop. I didn't want to install custom roms but I decided to try some to see how will my phone work with custom rom. Some custom rom with all working options will be awesome to try. Ty in advance
markokrstic said:
Hi guys. I have bad network reception on my N900T after upgrade to 5.0 Lollipop. I didn't want to install custom roms but I decided to try some to see how will my phone work with custom rom. Some custom rom with all working options will be awesome to try. Ty in advance
Click to expand...
Click to collapse
First your going to have reception issues with majority of custom roms. But it is easy to fix most issues that can occur.
My faves in order for 5.* sm-n900t are
Pac-rom - very easy to customize and tweak. Also light and fast. It's built from the best parts from many different roms.
Dompop - cool to use lots of different mods and such. Haven't used the latest nightly but one from a month ago had issues with lte signal but was simple to fix.
Cm 12.1 - although not as good as cm10 or cm12 was, 12.1 is a great Rom that shows off the experience the developers have gain over the countless roms for countless devices they've done.
Reply back and I can do you a quick tut and direct links to files needed. Currently using twrp and pac-rom 5.1.2
markokrstic said:
Hi guys. I have bad network reception on my N900T after upgrade to 5.0 Lollipop. I didn't want to install custom roms but I decided to try some to see how will my phone work with custom rom. Some custom rom with all working options will be awesome to try. Ty in advance
Click to expand...
Click to collapse
AryaMod is an awesome ROM that works with the N900T. It's stable and fast with tons of features (OTA updates, Aroma Installer, etc.) and development continues. The link is in my signature.
LiftedDroid said:
First your going to have reception issues with majority of custom roms. But it is easy to fix most issues that can occur.
My faves in order for 5.* sm-n900t are
Pac-rom - very easy to customize and tweak. Also light and fast. It's built from the best parts from many different roms.
Dompop - cool to use lots of different mods and such. Haven't used the latest nightly but one from a month ago had issues with lte signal but was simple to fix.
Cm 12.1 - although not as good as cm10 or cm12 was, 12.1 is a great Rom that shows off the experience the developers have gain over the countless roms for countless devices they've done.
Reply back and I can do you a quick tut and direct links to files needed. Currently using twrp and pac-rom 5.1.2
Click to expand...
Click to collapse
Thank you on ur time and help. Right now I have poor network reception after upgrading to official 5.0 Lollipop. Idk maybe to try PacRom or DomPop? I need S-Pen and Air command to work. Which one to install?
markokrstic said:
Thank you on ur time and help. Right now I have poor network reception after upgrading to official 5.0 Lollipop. Idk maybe to try PacRom or DomPop? I need S-Pen and Air command to work. Which one to install?
Click to expand...
Click to collapse
DomPop as long as you as you're good with full debloat. I personally need my samsung sync so I run Aurora full Note 4 port v6 with Lean Kernel hlte v6.3.
Sent from my SM-N9005 using Tapatalk
LiftedDroid said:
First your going to have reception issues with majority of custom roms. But it is easy to fix most issues that can occur.
My faves in order for 5.* sm-n900t are
Pac-rom - very easy to customize and tweak. Also light and fast. It's built from the best parts from many different roms.
Click to expand...
Click to collapse
Thanks bro. Im on pacman but it seems to lag from time to time. Im on the latest build. can i go back to a TW rom by just flashing? TIA
jackherer420x said:
Thanks bro. Im on pacman but it seems to lag from time to time. Im on the latest build. can i go back to a TW rom by just flashing? TIA
Click to expand...
Click to collapse
thanks for info I will try Dompop then.
kcohen67 said:
DomPop as long as you as you're good with full debloat. I personally need my samsung sync so I run Aurora full Note 4 port v6 with Lean Kernel hlte v6.3.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
Hey fam. How's it going?
Are you using an N9005 or N900T? I downloaed the Aurora ROM but in that thread it doesn't mention the 900T so i got curious.
cgingermany said:
Hey fam. How's it going?
Are you using an N9005 or N900T? I downloaed the Aurora ROM but in that thread it doesn't mention the 900T so i got curious.
Click to expand...
Click to collapse
I used 9005. It's great and is setup for the 900t in the aroma already
Sent from my SM-N9005 using Tapatalk
OK cool. About to give it a shot thanks fam
cgingermany said:
OK cool. About to give it a shot thanks fam
Click to expand...
Click to collapse
How's it working out for ya?
Sent from my SM-N9005 using Tapatalk
jackherer420x said:
Thanks bro. Im on pacman but it seems to lag from time to time. Im on the latest build. can i go back to a TW rom by just flashing? TIA
Click to expand...
Click to collapse
If you want to do official 5.0 the just use Odin and open up lollipop in it and flash. If any force closes the clear cache and stuff followed by reboot. If you going to kitkat I usually install tw lp clean then do the down grade since I find that note 3 will usually have issues any other way. Make sure you do backups of you modem and efs always in case of corruption.
Personally I just use full backups so I have all my apps logins and such on booting.
kcohen67 said:
How's it working out for ya?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
To be honest with you it was FC a lot and I couldn't get it to work right. I somehow erased my backup and needed a ROM to work "now" LOL so I gave Alliance 1.2.1 a shot and this puppy is sooooooooooo smooth fam! I haven't had an issue yet. I don't know if you'd tried it, its really nice and enough customizing to satisfy me so I stayed here.
cgingermany said:
To be honest with you it was FC a lot and I couldn't get it to work right. I somehow erased my backup and needed a ROM to work "now" LOL so I gave Alliance 1.2.1 a shot and this puppy is sooooooooooo smooth fam! I haven't had an issue yet. I don't know if you'd tried it, its really nice and enough customizing to satisfy me so I stayed here.
Click to expand...
Click to collapse
I tried it. It IS a nice Rom so can't be mad atcha. I pushed Alliance all through 4.4, but 5.01 belongs to these guys. I'd ever you think you wanna give it another shot...holla. I. Gotcho back.
Sent from my SM-N9005 using Tapatalk
This one is the best for me now: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
No doubt. Thanks a lot fam!
markokrstic said:
This one is the best for me now: http://forum.xda-developers.com/galaxy-note-3/development/rom-darklord-s6-port-alpha-t3083087
Click to expand...
Click to collapse
does it work with n900w8. or the n900t did u have to flash any other files for modem e.t.c?
kiazand said:
does it work with n900w8. or the n900t did u have to flash any other files for modem e.t.c?
Click to expand...
Click to collapse
works on my n900t only one bug thats blinking when u play videos but it will be fixed in next update. I dont have other issues. for n900w8 idk. I was on Norma S6 rom and I flashed this N5 port with TWRP. Full wipe/format and clean install. all good.
markokrstic said:
works on my n900t only one bug thats blinking when u play videos but it will be fixed in next update. I dont have other issues. for n900w8 idk. I was on Norma S6 rom and I flashed this N5 port with TWRP. Full wipe/format and clean install. all good.
Click to expand...
Click to collapse
Which Kernel are you using?
Which camera did you choose in Aroma - N4 or S6? I was thinking to pick the N4 because it might have better S-pen support, on the other hand maybe the S6 has more advanced features being of the newer software.
I was wondering if in general Samsung might be trending to lighter apps, less menu options, etc in the S6/N5.
ymmp said:
Which Kernel are you using?
Which camera did you choose in Aroma - N4 or S6? I was thinking to pick the N4 because it might have better S-pen support, on the other hand maybe the S6 has more advanced features being of the newer software.
I was wondering if in general Samsung might be trending to lighter apps, less menu options, etc in the S6/N5.
Click to expand...
Click to collapse
I had stock official 5.0 on N900T. First I installed Norma S6 but a lot of bugs. I only do full wipe format from stock 5.0 to Norma s6 and then I have done same from Norma S6 to DarkLord N5. Kernel is DarkLord, thats I got when I installed DarkLord N5 RC.
you want to divert from the available stock*Samsung*and AOSP based ROMs and experience something new, there is a new ROM for you that lets you enjoy*Galaxy S5*features on your old Galaxy S4 i9505.
The that lets U to enjoys S5 on S4 is GoldFinger rom that recently gets update and is became much stable.
Goldfinger rom is a full on pakage of nice features of Galaxy S5. Since it's a custom ROM so your phone must be rooted and have recovery tool CWM or TWRP installed in your phone.
Features of*GoldFinger ROM
•Based on the latest XXUGNI2 build (Android 4.4.2 KitKat)
●Galaxy S5*apps
▪Rooted,
•zipaligned,
▪init.d support and Busybox pre-installed
•4-way reboot menu
•Samsung*KNOX disabled
•Call recording
●Works with any GSM carrier and APNs can be edited
●AROMA*installer*that lets you choose what and what not to install before flashing*the ROM
●Download booster
●Google bloat removed
●Many*Samsung*bloats made removable: Activity zone, Chaton, Flipboard, Group Play, S-Health, S Note, S-Translator,Samsung*Wallet, Smart Remote, Trip Advisor,*Watch**on,*Samsung*Link, Guide and*Help,*Samsung*Apps,Samsung*Hub
DOWNLOAD GOLDFINGER ROM FOR S4 i9505
Mod Edit
Download rom,copy to phone sdcard,boot into recovery,flash it.
Have a great day...and enjoy your s4 i9505
downloading
Whats new?
droidblitz said:
Whats new?
Click to expand...
Click to collapse
You can experience S5 in S4 i9505
Download booster,s5 apps ,new ui,screen lock,settings etc...you can check Goldfinger rom features
These are old roms, why a new thread?
heblu said:
These are old roms, why a new thread?
Click to expand...
Click to collapse
It's a good rom and much people don't know about this that's why new thread
Lol what: http://forum.xda-developers.com/galaxy-s4/i9505-develop/moving-please-post-t2864816
TeChjEEpers... said:
It's a good rom and much people don't know about this that's why new thread
Click to expand...
Click to collapse
There is already a thread for it, the original one...
Anyway, good rom indeed
alesu69 said:
Lol what: http://forum.xda-developers.com/galaxy-s4/i9505-develop/moving-please-post-t2864816
Click to expand...
Click to collapse
It's quite similar..The thread I added is rom I flashed on my s4 I used it and added a thread to help other who don't know about it....have a gr8 day [emoji6]
TeChjEEpers... said:
It's quite similar..The thread I added is my work on my s4 I used it and added a thread to help other who don't know about it....have a gr8 day [emoji6]
Click to expand...
Click to collapse
What is your work if I may? The link you gave us is made by @iB4STiD right?
Don't get me wrong, I would like a new stuff in here, but I cannot see it...
heblu said:
What is your work if I may? The link you gave us is made by @iB4STiD right?
Don't get me wrong, I would like a new stuff in here, but I cannot see it...
Click to expand...
Click to collapse
I have this for my S4 and liked it and maked a thread for other people for help and anyone can see mine or iB4STiD's thread is the same thing..it's for helping purpose [emoji5]
helping purpose or not, you shouldn't say you added some "work" if you didn't, it's not fair for the developer.
alesu69 said:
helping purpose or not, you shouldn't say you added some "work" if you didn't, it's not fair for the developer.
Click to expand...
Click to collapse
I have just used this rom for my phone I mean it's my work for my s4 to make it look cool...I'm not saying about work on rom...I worked on my s4 for install this rom.i find it,and it was stable and thought that others must have it so I make a thread and again this rom is amazing developer had done an amazing work, I just published his work and I didn't mean that...
TeChjEEpers... said:
I have just used this rom for my phone I mean it's my work for my s4 to make it look cool...I'm not saying about work on rom...I worked on my s4 for install this rom.i find it,and it was stable and thought that others must have it so I make a thread and again this rom is amazing developer had done an amazing work, I just published his work and I didn't mean that...
Click to expand...
Click to collapse
Yeah but... his work is already published, not so many of us are still using kk otherwise his thread would be still alive.
TeChjEEpers... said:
It's quite similar..The thread I added is rom I flashed on my s4 I used it and added a thread to help other who don't know about it....have a gr8 day [emoji6]
Click to expand...
Click to collapse
Ohh you ll get warned ..you should delete this. You didn t gave credit to original developer and others who helped . So delete it ... While u can!
Member conduct.
Thread Closed
Please have a look HERE
Regards,
Bajanman
Hello fellow XDA members, I recently purchased a Le Pro 3 and a Le S3 during the flash sale and would like to use Cyanogenmod on my devices. I was wondering if anyone on this forum has ever ported a ROM before as I have not, and only know about the CM porting guide and opensource.le.com for the kernel source. If anyone has any tips or would like to assist me in porting CM13 to the Pro 3 please reply to this thread or PM me. Thanks, and let's hope LeEco releases the source soon!
Love to help but this isn't my department ????. But we should probably see more support in a couple more days once they start arriving here
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
dr4stic said:
Just out of curiousity, what exactly had you hoped to achieve with this post? If you're interested in porting, ideally you should at least be able to build a rom (for another pre-existing device)... and then you'll have to hunt down help on the CM forums and then eventually IRC.
Talking about this on XDA is pointless.
Click to expand...
Click to collapse
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
limitlesscodes said:
The purpose of my post was to see if anyone in the XDA community had experience porting a ROM to a new device, and if they'd be interested in helping me. I have read through a few guides and understanding building a ROM, but am struggling to find what I must "merge." From what I've found so far, I'll need to edit/merge the directories in /system/libs and edit the kernel?
Click to expand...
Click to collapse
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
dr4stic said:
No, it's far more complicated than that. You'll need a copy of the kernel for sure, but you'll also need a device definition. You can use the op3's device as a template, it's probably the best example of an msm8996 device you can have.
You really should be checking into the CM forums. CM people are pretty uppity about not supporting things on XDA. They also don't tend to help. Even as a developer I find it difficult sometimes to get their attention. Your best bet is to go to them if you want their help. Good luck.
Click to expand...
Click to collapse
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
limitlesscodes said:
Yeah, I understand. I also found out that it will be about a month until LeEco officially releases all of the source.
Click to expand...
Click to collapse
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
dr4stic said:
Where did you get that information from? They "accidentally" released kernel sources not too long ago and seemingly withdrew it. I got a copy of them and that's what I've been working with. I don't have a device to verify if any of it works.
Click to expand...
Click to collapse
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Not a lot. I've identified the CAF tag the sources are based on and have been working to separate the relevant LeEco mods from the less relevant ones. I've also been attempting to remove the leeco specific things from the drivers that i'm keeping since they're a horrible mess and CM won't be able to make use of them anyway. I've also been finding the appropriate open versions of the drivers and taking the latest ones instead.
The mods from LeEco seem to be a mess, the dmesg output I got from a user on the chinese model (the x720) had segfaults from the modifications just after boot. The logcats are so full of errors I was unable to get the user to send me a full logcat from boot.
Interestingly enough, the chinese system rom looks like it came from a Le Max2. This makes sense since it's LeEco's first msm8996 device, and the Le Pro3 is the second one. I imagine the kernel sources work across a number of the 8996's.
Can you send me the link to where you got the open drivers.
limitlesscodes said:
I asked on this forum. Also my S3 is coming tonight, and my Pro tomorrow. I have a copy of the Pro 3 kernel source as well but as of now don't know what to do. What have you worked on so far?
Click to expand...
Click to collapse
Please share the sources.
Sent from my LEX727 using Tapatalk
ceo.mtcl said:
Please share the sources.
Sent from my LEX727 using Tapatalk
Click to expand...
Click to collapse
here
limitlesscodes said:
here
Click to expand...
Click to collapse
Thank you so much!
limitlesscodes said:
here
Click to expand...
Click to collapse
This is not a International version? Its USA version? Where is the International source code?
Here's a mega mirror in case the drive link goes down.
https://mega.nz/#!7Ek3HYaB!1H0WibOjwlg1P0vaaJ2qcrAAsl-PjruB9-_X1ECqfnw
Wish i could help more, but it looks like the kernel source is in there too, perhaps that means a fully functional cm13 rom that works AT LEAST as well as the stock rom. VERY EXCITE!
+1
I'm also waiting for CM13.
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
:good:
csyann said:
I'm also waiting for CM13.
Click to expand...
Click to collapse
giogio1 said:
:good:
Click to expand...
Click to collapse
Waiting for CM 14.1
http://opensource.le.com