Related
Code:
[STRIKE]I just XBMC'd and rooted my Fire TV recently and sideloaded the play store successfully on my Fire TV.
However Google looks at the fire TV as TV device and thus does not show all apps or make them accessible (hulu android version (free content viewing))
I used this method but it looks like that Market Helper is crashing after step 1.
[url]http://www.aftvnews.com/how-to-trick-google-play-store-into-allowing-all-apps/[/url]
Went to the dashboard and the new device is not showing up....any ideas? :(
[/STRIKE]
I'm thinking about editing the Build.prop but I dont know what to put to mimic a AT&T Nexus 7 in the USA
I want to fake my entire device so I can use hulu for android on it. As android you can view free content on a mobile device without a plus account. I'm thinking about editing the Build.prop but I dont know what to put to mimic a AT&T Nexus 7 in the USA. I have a non-carrier Nexus 7 2012 and I can get the information from that but I'm slightly cautious...I've seen HDX threads how this is safe but what about on the Fire TV? I don't want a brick ;__:
lol looking at the build.prop the code name for the Fire TV was...Bueller..Like Ferris Bueller
Thread Topic Changed
seriously? no one has tried this yet??
stanleyopar2000 said:
seriously? no one has tried this yet??
Click to expand...
Click to collapse
Probably because your OP is confusing.
Okay, you want to spoof Hulu, that is what I am gathering from your post. I mean, who doesn't want to spoof Hulu so we can get some free entertainment?
Okay, the Hulu app, even though people seem to claim you can get free stuff on it, doesn't allow free stuff on it. So that leaves web browsers.
So far, my best luck has been Dolphin since you can change it to tell websites you are on a Desktop. Which is basically loads up, but I haven't been able to get it beyond that.
What we need is a custom browser for the AFTV that spoofs being a desktop (don't need to spoof the phone/tablet ****), that then layouts the page so it's useful for AFTV users. And that can, of course, actually play the shows, which I assume are flash crap, but I could be wrong.
nyder said:
Probably because your OP is confusing.
Okay, you want to spoof Hulu, that is what I am gathering from your post. I mean, who doesn't want to spoof Hulu so we can get some free entertainment?
Okay, the Hulu app, even though people seem to claim you can get free stuff on it, doesn't allow free stuff on it. So that leaves web browsers.
So far, my best luck has been Dolphin since you can change it to tell websites you are on a Desktop. Which is basically loads up, but I haven't been able to get it beyond that.
What we need is a custom browser for the AFTV that spoofs being a desktop (don't need to spoof the phone/tablet ****), that then layouts the page so it's useful for AFTV users. And that can, of course, actually play the shows, which I assume are flash crap, but I could be wrong.
Click to expand...
Click to collapse
Hulu allowed android users to stream free content that they can get on desktop free on mobile. It's only android. Not iPhone Every other platform (even the Desktop WIndows 8.1 app) requires a paid plus account. I was watching a full anime series (BECK) on the official hulu app on my Note 3 with a free account via chromecast screen mirroring. Using the Hulu Plus app on my smartphone. FREE. It's possible. I can jump on my Nexus 7 and go to the hulu app with a free account and pop on attack on titan without any issues (well with ads of course)
http://blog.hulu.com/2014/07/30/sample-free-content-on-hulu-for-android-2/
It says so here.
My problem is...is that when android hulu app starts up. It looks at the build.prop to see what device and model it is...and if it doesn't match the criteria of an android smartphone or tablet, it will be denied the free login.
currently my XBMC'd Fire TV has a "bueller" code name and a AFTV in the model area. Which is telling Hulu it's not an official android phone or tablet. I already used market helper to get full range of play store apps but that's just for the play store. My theory is that, if I change the build prop model and build names to my nexus 7 (2012) would it trick hulu into thinking the AFTV was a Nexus 7? thus allowing free content "sampling?"
I've changed the build.prop on my other devices for various things and reasons in the past and I can do it now. But is it safe to do on a AFTV??
stanleyopar2000 said:
Hulu allowed android users to stream free content that they can get on desktop free on mobile. It's only android. Not iPhone Every other platform (even the Desktop WIndows 8.1 app) requires a paid plus account. I was watching a full anime series (BECK) on the official hulu app on my Note 3 with a free account via chromecast screen mirroring. Using the Hulu Plus app on my smartphone. FREE. It's possible. I can jump on my Nexus 7 and go to the hulu app with a free account and pop on attack on titan without any issues (well with ads of course)
http://blog.hulu.com/2014/07/30/sample-free-content-on-hulu-for-android-2/
It says so here.
My problem is...is that when android hulu app starts up. It looks at the build.prop to see what device and model it is...and if it doesn't match the criteria of an android smartphone or tablet, it will be denied the free login.
currently my XBMC'd Fire TV has a "bueller" code name and a AFTV in the model area. Which is telling Hulu it's not an official android phone or tablet. I already used market helper to get full range of play store apps but that's just for the play store. My theory is that, if I change the build prop model and build names to my nexus 7 (2012) would it trick hulu into thinking the AFTV was a Nexus 7? thus allowing free content "sampling?"
I've changed the build.prop on my other devices for various things and reasons in the past and I can do it now. But is it safe to do on a AFTV??
Click to expand...
Click to collapse
Okay, with the recovery installed, I don't see why it's not safe to change the build.prop. Not the expert on it though.
nyder said:
Okay, with the recovery installed, I don't see why it's not safe to change the build.prop. Not the expert on it though.
Click to expand...
Click to collapse
thanks for helping me so far! so install a custom recovery and backup and then change the build.prop and watch what happens?...I wish more people would weigh in on this.............
stanleyopar2000 said:
thanks for helping me so far! so install a custom recovery and backup and then change the build.prop and watch what happens?...I wish more people would weigh in on this.............
Click to expand...
Click to collapse
I did some searching, found this article about it: http://apcmag.com/how-to-fake-an-android-device.htm
Found this also, different direction then spoofing build.prop http://www.makeuseof.com/tag/problems-with-hulu-on-android-fix-it-with-two-simple-and-easy-apps/
nyder said:
I did some searching, found this article about it: http://apcmag.com/how-to-fake-an-android-device.htm
Found this also, different direction then spoofing build.prop http://www.makeuseof.com/tag/problems-with-hulu-on-android-fix-it-with-two-simple-and-easy-apps/
Click to expand...
Click to collapse
Thanks much! I will definitely look into this!
I keep on reading that the Fire TV Stick is supposed to have this dedicated free app to control be able to control it from your android device (and ios coming soon...blah blah) and use voice search from your phone/tablet also....but I can't find where to download it!! Don't know if it will even work to Fire TV but it would be pretty dumb if they didn't allow it too!!
Anybody know how and where to get this app??
Had my fire tv at my girlfriends house and her little crazy dog has destroyed 2 remotes so I bought her a chromecast and brought the Fire TV back home. I leave 1tb backup drive connected to the usb to play movies through xbmc and everytime I leave the house and come back I have to disconnect it, plug in wireless keyboard, start droidmote server, reconnect drive and remount using stickmounte...it's a waste of a whole 60 seconds but still a pain!!
I don't believe it has been released yet. Still two more weeks or so until the fire tv sticks start shipping, I would expect to see it before then.
Sent from my SCH-I545 using Tapatalk
Mike3.14159 said:
I keep on reading that the Fire TV Stick is supposed to have this dedicated free app to control be able to control it from your android device (and ios coming soon...blah blah) and use voice search from your phone/tablet also....but I can't find where to download it!! Don't know if it will even work to Fire TV but it would be pretty dumb if they didn't allow it too!!
Anybody know how and where to get this app??
Had my fire tv at my girlfriends house and her little crazy dog has destroyed 2 remotes so I bought her a chromecast and brought the Fire TV back home. I leave 1tb backup drive connected to the usb to play movies through xbmc and everytime I leave the house and come back I have to disconnect it, plug in wireless keyboard, start droidmote server, reconnect drive and remount using stickmounte...it's a waste of a whole 60 seconds but still a pain!!
Click to expand...
Click to collapse
Keep an eye out for it here: http://www.aftvnews.com/
AFTVNews is very good @ keeping up with new app releases. Sometimes even a day or two before it happens...
Mike3.14159 said:
I keep on reading that the Fire TV Stick is supposed to have this dedicated free app to control be able to control it from your android device (and ios coming soon...blah blah) and use voice search from your phone/tablet also....but I can't find where to download it!! Don't know if it will even work to Fire TV but it would be pretty dumb if they didn't allow it too!!
Anybody know how and where to get this app??
Had my fire tv at my girlfriends house and her little crazy dog has destroyed 2 remotes so I bought her a chromecast and brought the Fire TV back home. I leave 1tb backup drive connected to the usb to play movies through xbmc and everytime I leave the house and come back I have to disconnect it, plug in wireless keyboard, start droidmote server, reconnect drive and remount using stickmounte...it's a waste of a whole 60 seconds but still a pain!!
Click to expand...
Click to collapse
Why you must start droidmote server manually ? It should start automatically if in settings you have checked auto start on boot.
Y314K said:
Keep an eye out for it here: http://www.aftvnews.com/
AFTVNews is very good @ keeping up with new app releases. Sometimes even a day or two before it happens...
Click to expand...
Click to collapse
Yeah, have had that site bookmarked for a while now - one of the 6-7 android type sites I check when I get to my college every morning.
zulu99 said:
Why you must start droidmote server manually ? It should start automatically if in settings you have checked auto start on boot.
Click to expand...
Click to collapse
Thanks for the heads up, didn't realize that I could start it on boot!!
zulu99 said:
Why you must start droidmote server manually ? It should start automatically if in settings you have checked auto start on boot.
Click to expand...
Click to collapse
I see that one can install the server on Windows. But can the client be installed on Windows. Planning on switching from an Android table to a full Windows 8.1 Tablet in the future. But could not find a reference of Windows 8.1 being the client to control the FTV. Not so much for games but mouse & keyboard inputs.
Y314K said:
I see that one can install the server on Windows. But can the client be installed on Windows. Planning on switching from an Android table to a full Windows 8.1 Tablet in the future. But could not find a reference of Windows 8.1 being the client to control the FTV. Not so much for games but mouse & keyboard inputs.
Click to expand...
Click to collapse
If you want you can already do:
https://plus.google.com/103019026671039069038/posts/DzuU4AA5cQE
Or you can also use Bluestack
zulu99 said:
If you want you can already do:
https://plus.google.com/103019026671039069038/posts/DzuU4AA5cQE
Or you can also use Bluestack
Click to expand...
Click to collapse
cool.. thanks for the info...
zulu99 said:
Why you must start droidmote server manually ? It should start automatically if in settings you have checked auto start on boot.
Click to expand...
Click to collapse
Zulu,
Any plans to get droidmote on the Amazon App Store? I would be happy to pay a premium on it there since I could use my amazon coins to buy it....
I would like a lot, but I can not for now for a question of the security of the app. It is not easy to be an Android app developer, despite the applications are very cheap, there is always someone ready to rip you off and because of this, there is often more work to do on the protection that on the app.
I think the Google Play should be installable for FREE on any Android devices. (like the Amazon app store) I do not understand why it should be sold by GMS license from Google if it contains apps that are owned by the developers. I hope that this serious problem of the Android world will be solved soon.
zulu99 said:
Why you must start droidmote server manually ? It should start automatically if in settings you have checked auto start on boot.
Click to expand...
Click to collapse
Any idea how to force the setting menu to open with a wireless keyboard?? I see the 3dot menu on the google play pics but don't have it on the app on my fire TV...even downloaded the 3dot xposed module but no luck! I know that the fire stick remote app is officially being released tmrw but really like this app and is probably still gonna be more useful than the official remote app!
Never mind!! Was able to open it with droidmote!
Mike3.14159 said:
Never mind!! Was able to open it with droidmote!
Click to expand...
Click to collapse
Yes you can use the menu button of DroidMote Client.
Aside from that, I wanted to make a clarification:
The circle icon that you see when you move the mouse, is not a DroidMote stuff. If you use the Server on a standard Android device, you can see the classic mouse icon.
Instead the TouchMouse (for apps without mouse support, selectable by client settings ) is a DroidMote stuff and is the red transparent circle. But it is another thing.
Why your FireTv show the circle instead of the classic mouse icon ?
Because those who built the firmware has changed this icon replacing it with a really ugly in the Android Framework.
Where is the mouse icon inside the Android Framework ?
You can read this link to know, but do not try to change if you're not an expert on the Android OS.
http://forum.xda-developers.com/showthread.php?t=1478523
P.S.
Android is an operating system that is constantly changing and all the apps within it change so fast-paced.
To have a good remote control, you need a lot of work and testing on many applications during the evolution of the OS.
For example with Android Lollipop, Android has been completely changed from the ground up, and it took a lot of work to adapt to it.
A good application for remote control, can only exist if a developer follows her and love her everyday, adapting to all the innovations, to apps and games that constantly change.
This is what I do every day.
zulu99 said:
Aside from that, I wanted to make a clarification:
The circle icon that you see when you move the mouse, is not a DroidMote stuff. If you use the Server on a standard Android device, you can see the classic mouse icon.
Instead the TouchMouse (for apps without mouse support, selectable by client settings ) is a DroidMote stuff and is the red transparent circle. But it is another thing.
Why your FireTv show the circle instead of the classic mouse icon ?
Click to expand...
Click to collapse
Sorry for not being clearer - when I opened the app ALL I would see on the screen was the "big red circular button" in the center of the screen - the one that says off, not the cursor. But after using my keyboard to "click" the "button" and turn the service on I was able to use the client app to open up the setting and set it to start on boot
Mike3.14159 said:
Sorry for not being clearer - when I opened the app ALL I would see on the screen was the "big red circular button" in the center of the screen - the one that says off, not the cursor. But after using my keyboard to "click" the "button" and turn the service on I was able to use the client app to open up the setting and set it to start on boot
Click to expand...
Click to collapse
When you saw the red circle was because, inadvertently, in the settings of the Client you have selected the TouchMouse without selecting a correct TouchProfile.
The TouchMouse is useful when an app not have the mouse support. In all other circumstances, you can always use the mouse as rightly made at a later date.
For a quick start guide you can read this page:
http://www.videomap.it/dmcguide.htm
Hi all,
I picked up a second new FTV for my Daughter, Side loaded kodi and set it up, all works well.
Then proceeded to use LLama redirect (Tried Ikoni and Tubitv) and it will not launch Kodi. I can change the "run application" to Photos,netflix etc and the redirect works. I then switch it back to Kodi and poof..it starts the original sacrificial program.
What the heck am I doing wrong? or is this something new that I didn't find during a search?
one other weird thing, if I run test within LLama it will not start it from there either. But, if I uninstall Kodi (any 14.x version) and then reinstall and do not run it from FTV it will launch the program 1 time and show Kodi first time setup. Then POOF, its all done again .
Thanks in advance
Phil
Flame away is its something stupid lol
I can confirm this issue. Having the same exact problem on several of the newer fire tv's. Other apps are redirecting fine. only Kodi is not redirecting. Also I tried several different sacrificial apps and all would not launch kodi. I also tried a different version of llama, 10.24.2014 without success.
NTIMID8 said:
Hi all,
I picked up a second new FTV for my Daughter, Side loaded kodi and set it up, all works well.
Then proceeded to use LLama redirect (Tried Ikoni and Tubitv) and it will not launch Kodi. I can change the "run application" to Photos,netflix etc and the redirect works. I then switch it back to Kodi and poof..it starts the original sacrificial program.
What the heck am I doing wrong? or is this something new that I didn't find during a search?
one other weird thing, if I run test within LLama it will not start it from there either. But, if I uninstall Kodi (any 14.x version) and then reinstall and do not run it from FTV it will launch the program 1 time and show Kodi first time setup. Then POOF, its all done again .
Thanks in advance
Phil
Flame away is its something stupid lol
Click to expand...
Click to collapse
I wasn't entirely happy with the llama route for this, and now that a developer on xda has come up with firestarter, I removed all of the llama stuff and have been much happier. You might give it a try and see if it will work for you. http://www.aftvnews.com/firestarter...acement-with-fantastic-home-button-detection/
YumYum,
I was able to solve the issue by going into settings and forcing the latest sw/firmware update and everything started working. It was funny, I didn't even redo anything, I had updated the atv with both LLama boot redirect and application redirect. When the box rebooted kodi popped right up.
mscroggi said:
I wasn't entirely happy with the llama route for this, and now that a developer on xda has come up with firestarter, I removed all of the llama stuff and have been much happier. You might give it a try and see if it will work for you.
Thanks for the heads up, going to check it out as well.
Click to expand...
Click to collapse
I made 2 steps for Llama:
First kill IkonoTV (or any other app you used as sacrificial app) and afterwards start KODI.
Calibaan said:
I made 2 steps for Llama:
First kill IkonoTV (or any other app you used as sacrificial app) and afterwards start KODI.
Click to expand...
Click to collapse
please post the process here thanks in advance
Create a new rule with:
Set a condition "if IkonoTV" is active
add event "Kill application" for IkonoTV app
add second event "Start application" for KODI app
Now start IkonoTV from the start page. It will launch but also close directly shortly followed by the start of KODI as desired.
Thanks for the info, but did not work for me. Just got my Fire TV today (but have done the Kodi config successfully on a couple of Fire Sticks)
Tried with Classic TV (which now says "This App Is No Longer Available" and IkonoTV.
Any suggestions? Thanks!
Should make no difference which app you choose to kill for KODI.
The only prerequisites for this is to install an app from the Amazon App Store because only those appear on top within the original FireTV GUI. Because of this and because IkonoTV is for free it is done most the time with this app but it should be possible with every other (free) app from the Amazon App Store so you don´t need a TV related app it could be even something like calculator app
So I would suggest to install another free app from the app store and try it with this app.
I unplugged and rebooted the device, and Llama seems to be working now. Thanks again for the tip!
Could someone please extract the following apps so the community can try to use them on Android TV? Other apps have been extracted and work.
All4, ITVHub, My5, RTÉ Player, 3Player, and TG4.
Depending on your location, UK or Ireland, you may or may not be able to extract all of these due to geo-blocking, but any with which you can help would be greatly appreciated.
Instructions on how to extract the APKs can be found here:
http://forum.xda-developers.com/showpost.php?p=64124593&postcount=3
and/or at the following link, skipping the final step 8:
http://www.aftvnews.com/how-to-transfer-amazon-fire-tv-apps-to-a-fire-tv-stick/
dusf said:
Could someone please extract the following apps so the community can try to use them on Android TV? Other apps have been extracted and work.
All4, ITVHub, My5, RTÉ Player, 3Player, and TG4.
Depending on your location, UK or Ireland, you may or may not be able to extract all of these due to geo-blocking, but any with which you can help would be greatly appreciated.
Instructions on how to extract the APKs can be found here:
http://forum.xda-developers.com/showpost.php?p=64124593&postcount=3
and/or at the following link, skipping the final step 8:
http://www.aftvnews.com/how-to-transfer-amazon-fire-tv-apps-to-a-fire-tv-stick/
Click to expand...
Click to collapse
i searched for these but couldn't find any, perhaps like you said it's location-based and I'm in the USA.
d3adpool said:
i searched for these but couldn't find any, perhaps like you said it's location-based and I'm in the USA.
Click to expand...
Click to collapse
Thank you very much for your efforts all the same
The first three definitely exist, they are the UK apps, the last three, the Irish apps, I am unsure of.
really need this!!!!
dusf said:
Thank you very much for your efforts all the same
The first three definitely exist, they are the UK apps, the last three, the Irish apps, I am unsure of.
Click to expand...
Click to collapse
Ok I did with a little effort manage to download and extract 3 of them from my firetv. 2 of them are attached and there's a link for the My 5 below.
https://mega.nz/#!8IxWEBjC!c88wn4dSoh9C8XaPXB_NTAd6ATNfHb56QXzuzvr1n_I
d3adpool said:
Ok I did with a little effort manage to download and extract 3 of them from my firetv. 2 of them are attached and there's a link for the My 5 below.
https://mega.nz/#!8IxWEBjC!c88wn4dSoh9C8XaPXB_NTAd6ATNfHb56QXzuzvr1n_I
Click to expand...
Click to collapse
Great, good job, thanks!!
I will try them this morning on Android TV and update this thread!
dusf said:
Great, good job, thanks!!
I will try them this morning on Android TV and update this thread!
Click to expand...
Click to collapse
Cool I hope it works out for you
d3adpool said:
Cool I hope it works out for you
Click to expand...
Click to collapse
Okay, so these install fine, but when they launch they give an error about no Amazon App Store found. I first mistakenly downloaded a version of Amazon Underground from Aptpoide, which also crashed after running, but on googling I found an official Amazon link which does work.
After logging into Amazon Underground, the apps no longer gave that error, but instead a new one about not having 'bought' these apps. I then tried to 'buy' them using the Amazon Underground app but they do not appear for me because I am in the Republic of Ireland.
I am sure I can get around this with some VPN trickery, just doing some when on our living room, mounting new TV etc, so have not gotten to it just yet.
In case you are wondering why I did not just set up a VPN in the first place and try to 'buy' the apps with an Android device, that is because I do not think this will give me a version compatible with a remote control, whereas we know the versions you have uploaded is.
I will update thread when I've set up VPN and tried all of this.
Has anyone else had any success?
dusf said:
Okay, so these install fine, but when they launch they give an error about no Amazon App Store found. I first mistakenly downloaded a version of Amazon Underground from Aptpoide, which also crashed after running, but on googling I found an official Amazon link which does work.
After logging into Amazon Underground, the apps no longer gave that error, but instead a new one about not having 'bought' these apps. I then tried to 'buy' them using the Amazon Underground app but they do not appear for me because I am in the Republic of Ireland.
I am sure I can get around this with some VPN trickery, just doing some when on our living room, mounting new TV etc, so have not gotten to it just yet.
In case you are wondering why I did not just set up a VPN in the first place and try to 'buy' the apps with an Android device, that is because I do not think this will give me a version compatible with a remote control, whereas we know the versions you have uploaded is.
I will update thread when I've set up VPN and tried all of this.
Has anyone else had any success?
Click to expand...
Click to collapse
I figured exactly what you mentioned, it's a shame that we have to sometimes jump thru all these hoops to get things working....keep us updated
..
JJ-KwiK said:
I can try to patch out the Amazon dependencies. It's worked for a few apps that I've dumped from my fire tv to use with my shield.
No promises, but I'll give it a shot.
Sent from my SM-G925W8 using XDA Premium HD app
Click to expand...
Click to collapse
That would be great too, thanks.
I will still try it from my end.
By the way, which apps have you extracted for your shield already, and is there a centralised place anyone is collating fire extracted apks?
..
JJ-KwiK said:
I've extracted Spotify and WatchESPN. However, official Android TV versions of those apps have since been released. I've also extracted Flappy Birds Family. I don't know of any centralized area where all the exracted FireTV apps are being posted though.
I do have a post on the Wetek forums with Android TV and FireTV app mods, modified to work with regular android.
http://www.wetekforums.com/v/index.php?p=/discussion/27564
Anywho...
Here are the modded APKs. I've removed any Amazon checks. They install fine. I can't check if the video's play as I don't live in the proper geographical area.
All 4 - https://mega.nz/#!K4QlmBTK!PBWAbaGIPFh9Fx92_Oqxv_RKKlpQLtfCyWGX-H6hRpw
Demand 5 - https://mega.nz/#!7pJHmaIR!zfLnhoBG1CeyFpZVHpyjYamADqDq8AYHuLKJlrarZTI
ITV Hub - https://mega.nz/#!C0ZykJSb!IxOYC1w7CLCgkRGshT2VEdZ_j3fBU4BJQLbZsTXkjWg
Please let me know if they work.
Click to expand...
Click to collapse
Good work. I have a question: Do you do the reverse of this and remove checks from google play apks? Reason I ask is I've been trying to get Watch NFL network sideloaded on my firetvs, and they install but launching gives a can't launch from phone error and closes out. It works fine on my Minix neo x8 plus.
JJ-KwiK said:
I've extracted Spotify and WatchESPN. However, official Android TV versions of those apps have since been released. I've also extracted Flappy Birds Family. I don't know of any centralized area where all the exracted FireTV apps are being posted though.
Click to expand...
Click to collapse
Thanks, I have just uninstalled Emma+ and installed Spotify, I was not aware they released a native app.
JJ-KwiK said:
Anywho...
Here are the modded APKs. I've removed any Amazon checks. They install fine. I can't check if the video's play as I don't live in the proper geographical area.
All 4 - https://mega.nz/#!K4QlmBTK!PBWAbaGIPFh9Fx92_Oqxv_RKKlpQLtfCyWGX-H6hRpw
Demand 5 - https://mega.nz/#!7pJHmaIR!zfLnhoBG1CeyFpZVHpyjYamADqDq8AYHuLKJlrarZTI
ITV Hub - https://mega.nz/#!C0ZykJSb!IxOYC1w7CLCgkRGshT2VEdZ_j3fBU4BJQLbZsTXkjWg
Please let me know if they work.
Click to expand...
Click to collapse
Nice work, thanks! :good:
Okay so I just cleared data, storage, reset defaults and (not sure if necessary since I then...) uninstalled the older versions and reinstalled your uploaded versions.
ITV Hub works perfectly :highfive: only issue I can see with it is that when you press back it displays a dialogoue asking 'Do you want to exit the ITV Hub' with the options Okay and Cancel. Pressing cancel does nothing, not a huge deal just thought I would mention it in case it is a quick fix.
Demand 5 loads their splashscreen, then for an instant a progress disc, and then prints the following error:
Code:
Whoops!
An error has occured and the application will now shut down.
<Exit button>
(FTVD5-500)
All 4 loads their splashscreen, and then the screen goes black and stays black. Please note this is the same behaviour as before you modified it, that is to say, unmodified Demand 5 and ITV Hub did load but gave errors about Amazon Underground, whereas All 4 never got that far.
- d3adpool, do you think it possible the apk you uploaded could have become corrupt, or could we rule that out as if it were we would not even see the All 4 splashscreen?
Is there anything you could try?
JJ-KwiK said:
I do have a post on the Wetek forums with Android TV and FireTV app mods, modified to work with regular android.
http://www.wetekforums.com/v/index.php?p=/discussion/27564.
Click to expand...
Click to collapse
Cool, I had a look at the thread and I can see you have been busy - and are taking requests.
If you are able to modify an Android TV app to work on regular Android, does that mean you can also do the reverse? If so could you please modify regular Android versions of RTÉ Player, 3Player, and TG4 so that they will work on Android TV with a remote? 3Player is giving me some bogus error at the moment so I have posted in an Irish forum to see if anyone else is experiencing it, and TG4 only comes up for me on Google Search showing a compatibility issue, and not in Play Store on either of my Android devices, so I have asked about that also, I just want to check they are working okay before I upload them for you. RTÉ Player does work and I have attached it below:
I'm not sure if they got corrupted or not. They did load for me on my ftv. Previous experience with sideloading ftv apps on other android devices tells me that usually it won't work. I have a MXIII and a Minix neo x8plus and on both I've attempted to sideload ftv apps and none of them have actually loaded. Either I would get a parsing error, sitting on a loading screen when trying to play a video, HDCP error (HBOGO), or some other random error. Most times you're better off installing apks from the google play store.
..
JJ-KwiK said:
@d3adpool - Send me the watch NFL apk and I'll see what I can do.
@dusf - I believe there is an issue with the all 4 apk. Hopefully we can find a fresh apk. The demand 5 app works fine on my end, but won't play video due to geographical location. What device are you testing it on?
I can't add remote functionality to touch apps though. Sorry.
Sent from my SM-G925W8 using XDA Premium HD app
Click to expand...
Click to collapse
I use an Nvidia Shield Android TV.
Real shame about All4 and Demand 5 not working, but great work with ITV Hub
..
JJ-KwiK said:
@dusf - Hey man, I just tested Demand 5 on my Wetek Core, nVidia Shield TV and Amazon Fire Stick. The app works on all 3 devices. I think the issue may be on your end? Can anyone else confirm if the app works for them? Can you try the updated version I posted below?
I also don't run into the, "press back displays a dialogue asking 'Do you want to exit the ITV Hub' with the options Okay and Cancel. Pressing cancel does nothing", issue. What controller/remote are you testing it with? I tried ITV Hub on my shield with the nVidia controller, nVidia remote and FireTV remote, and all worked fine.
Click to expand...
Click to collapse
I have all three, Nvidia Controller, Nvidia remote, and Amazon Fire TV Voice remote, so I will try all three again with the updated versions you posted. I also have to Nvidia Shield TVs, so I will try both if they do not work on one.
JJ-KwiK said:
Anywho... Since I tested ITV Hub and Demand 5 on my Android TV, and they both seemed to work fine, I added a banner and the proper intent to the manifest so they now show up in the Leanback Launcher. However, I can't check if videos play because I don't live in the proper geographical area.
Click to expand...
Click to collapse
Nice, having access to them from the launcher is a nice feature, and it did cross my mind when testing the last time but I was very happy to have ITV Hub in the first place
JJ-KwiK said:
If anyone can get their hands on a clean copy of the All 4 apk, I could try to modify that as well.
Click to expand...
Click to collapse
Can you define clean version? d3adpool has been a great help so far, perhaps if he is still willing, there is something he could do to make sure his version is not dirty?
About not being able to add remote functionality to the regular Android app, RTÉ Player app, is this something that would be possible if someone put enough time into it, or is it just set up in such a way that it would never work? I just know a bit of C and C++ at the moment, but perhaps when I learn a few more languages I could help with this. Would having access to the source code of Samsung Smart TV apps for the same channels help? This is something I could provide. I appreciate they are probably in a completely different language.
JJ-KwiK said:
@dusf - Hey man, I just tested Demand 5 on my Wetek Core, nVidia Shield TV and Amazon Fire Stick. The app works on all 3 devices. I think the issue may be on your end? Can anyone else confirm if the app works for them? Can you try the updated version I posted below?
I also don't run into the, "press back displays a dialogue asking 'Do you want to exit the ITV Hub' with the options Okay and Cancel. Pressing cancel does nothing", issue. What controller/remote are you testing it with? I tried ITV Hub on my shield with the nVidia controller, nVidia remote and FireTV remote, and all worked fine.
Anywho... Since I tested ITV Hub and Demand 5 on my Android TV, and they both seemed to work fine, I added a banner and the proper intent to the manifest so they now show up in the Leanback Launcher. However, I can't check if videos play because I don't live in the proper geographical area.
Amazon dependancies have been removed and the apps have been modified to work on Android TV devices.
ITV Hub -
Demand 5 -
If anyone can get their hands on a clean copy of the All 4 apk, I could try to modify that as well.
Click to expand...
Click to collapse
Hi thanks for sharing those, I tried Demand 5 on my nvidia shield tv, The app works fine apart from when you go to play a video. I just get the loading icon top right spinning continuously.
Hi!
As I have no access to the FireTV Amazon App Store, I would like to request two apk's. The first one is the Amazon App Store-app from FireTV, and the second one is the newly released official Apple TV-app available for Amazon FireTV. Are anyone able to extract those two for me?
Thanks in advance!
Also waiting on these. Have 12 months free Apple TV but no way to play on TV
---------- Post added at 02:53 PM ---------- Previous post was at 02:47 PM ----------
So managed to put an old version on the Shield to get past the verification and then it tells me that I don't own this app (referring to Apple TV) and then it takes you to the app page on the App Store which tells you that the device isn't compatible. Looks like there isn't a way to bypass the check currently
Could we use this method? /fire-tv/help/bbc-iplayer-sideloaded-app-owned-error-t3315474/amp/
Found it with five minutes of googling
https://www.apkmirror.com/apk/apple...-tv-fire-tv-variant-1-2-android-apk-download/
Ravetcofx said:
Found it with five minutes of googling
Click to expand...
Click to collapse
Problem is it says you do not own this app when trying to run.
Can anyone patch this?
Too Fresh said:
Problem is it says you do not own this app when trying to run.
Can anyone patch this?
Click to expand...
Click to collapse
1) Install the phone/tablet Amazon Appstore app on TV/settop box.
2) Open app & sign in with your Amazon credentials
3) With your computer, or desktop mode on phone/tablet browser, visit this site: https://www.amazon.com/Apple-Inc-TV/dp/B07XDD7GYT/
4) Hit "Get App" icon, signing in if needed. Even though it says it is not compatible with any devices, it will still allow the 'purchase.' Let it continue, and you should see a confirmation text towards the top of the page that you now own the app.
5) Return to TV/settop box & run the app again.
Now I haven't used this update yet, but there may yet still be problems actually logging in with Apple ID.
ADDENDUM: This version checks build.prop so it likely won't work in anything but a compatible Fire TV model. This won't be an easy fix, and such a fix may require root.
Sent from my HD1905 using Tapatalk
GenesisDH said:
1) Install the phone/tablet Amazon Appstore app on TV/settop box.
2) Open app & sign in with your Amazon credentials
3) With your computer, or desktop mode on phone/tablet browser, visit this site:
4) Hit "Get App" icon, signing in if needed. Even though it says it is not compatible with any devices, it will still allow the 'purchase.' Let it continue, and ypu should see a confirmation text towards the top of the page that you now own the app.
5) Return to TV/settop box & run the app again.
Now I haven't used this update yet, but there may get still be problems actually logging in with Apple ID. I plan to try in a while.
Sent from my HD1905 using Tapatalk
Click to expand...
Click to collapse
Thanks for the instructions. I seem to have gotten closer but now run into a new error.
“To use Apple TV app, please install the latest fire tv software version in settings”
I’m using the Fire TV (first gen) with the newest software on it currently. Any idea on how to bypass this? (Some reason they decided to not give access to Apple TV on the 1st gen)
Too Fresh said:
Thanks for the instructions. I seem to have gotten closer but now run into a new error.
“To use Apple TV app, please install the latest fire tv software version in settings”
I’m using the Fire TV (first gen) with the newest software on it currently. Any idea on how to bypass this?
Click to expand...
Click to collapse
First gen Fire TV... I don't believe first gens are supported. Only Fire TV Stick 2nd Gen, and the Fire Stick 4K.
It might work with the 3rd gen, TV Cube or TV Editions, but do not know.
It appears to be looking at the build.prop (or maybe the Fire OS build version) upon launch, which you can't easily modify without root access. So it looks coded to fail if it isn't a supported device.
Sent from my HD1905 using Tapatalk
The link above and attached is good
https://www.apkmirror.com/apk/apple-inc/
The snag for me was that i had an Apple ID but that is not enough. You must open an iTunes account too. Once that was done I was in. Then, I was underwhelmed. Nothing new there except for the Jason Mamoa flick "See". You can watch two episodes free and then must pay. I passed.
After jumping the hoops it runs fine on my Cube 2 that is going back after my new Shield Pro arrives tomorrow. My second Cube 2 continually stalls like the first. Cannot duplicate the behavior on Stick 4k, Cube 1, Roku HD, Roku Stick 4k, and LG WebOS 3.5. YTTV, Netflix, Showtime, all stall. Nice that Fire now supports YTTV and Dis+ but too late for me. Tired of jumping from platform to platform. Cube 2 would have done it finally for me but tired of restarting programs. My Harmony Hub has HBO Now issues with the Cube 2 too. Select/OK doesn't work. Weird. Too many moving parts.
Has anybody managed to get this to work on Nvidia Shield without rooting it to change build.prop?
(And I assume that changing build.prop has the potential to break other things as well).