Hello, first I'd like to thank you for your time reading this.
Note: I've searched the forums a lot, even for other LG Devices (G2 for ex) but I couldn't find a solution.
Trying to flash CM12 by _infected (amazing rom, working as a daily driver on my other lg pad btw) and messed up something on TWRP.
-First trying to do a Factory Reset via TWRP gave me "failed to mount /data" and "/system" I rebooted and the device went straight to TWRP Recovery, I rebooted again, this time making sure I selected "Reboot to System" and it went again to TWRP Recovery...
- I did another wipe, this time wiped everything (all checkboxes in TWRP), reboot and... no boot...
Now my LG Pad is at the following State:
- Black Screen (No LG Logo)
- Connecting USB to Windows gives the "connected sound"
- Adb doesnt find device (driver was installed and working).
- Device Manager "refreshes" on USB plug but doesnt show the device (or I can't find it?).
- Holding Power on the tablet while USB plugged to Windows gives the "disconnected sound" -> "connected sound" -> "connected sound".
- Can't boot into Download Mode.
- Can't turn off the Tablet... only Reboots holding Power key.
Please? Any help?
What can I do?
Is warranty void at this point?
Thank you very much for any help you can provide.
I have a G pad in the same situation, and I wasn't able to fix it. I managed to pick up another cheap one, but I'll follow this thread in case you get an answer.
You have to find a way to get it into download mode or you wont be able to fix it with LG Tool
What did you mess up, and how did you install twrp ? Also what twrp version abd base.
mekoneko said:
What did you mess up, and how did you install twrp ? Also what twrp version abd base.
Click to expand...
Click to collapse
For me personally, I assumed it'd be as easy as the twrp page makes it out to be , or my nexus 4 was, so I just went for it. I ran into that secure boot error with twrp, and rebooted back into stock. There was an OTA update, so I did it (stupid I now realise) and that bricked it on reboot. It won't turn on at all. If i plug into USB on a computer it OCCASIONALLY brings something up on the screen, the LG logo I think or something, but I cannot for the life of me get it into download mode. It's at home right now, so ic anot remmeber the exact thing it shows on screen, but almost certainly not download mode, and none of the hardware buttons seem to be responsive for doing factory resets or download or anything.
I managed to send the LG G Pad to warranty and got a new one... Lucky me...
Guess that if we can't get into DL mode they can't either.
However after much investigation I've realized that the problem was a corrupted system partition...
Related
So I just got an LG G pad 10.1 VK700 from Verizon the other day. I rooted the device on the first day but never really added any additional apps or software.
Another member in the household was using the tablet and it asked if they wanted to accept the VZW Update for KitKat 5.0. They downloaded the update, and now the tablet is stuck in a bootloop at the Fastboot screen.
There are only 3 options I can select from this screen in the top left using the volume keys: RESTART, RESTART BOOTLOADER & POWER OFF. Any time I select either of the restart options, the screen just goes blank and hangs. I have to manually power off, and upon turning back on I am right back to this limited Fastboot menu.
Bottom left reads:
FASTBOOT MODE
PRODUCT_NAME - E9LTE_VZW
VARIANT - e9lte_vzw Toshiba 16GB
HW VERSION - rev_10
BOOTLOADER VERSION - N/A
BASEBAND VERSION - N/A
CARRIER INFO - N/A
SERIAL NUMBER - VZ7005xxxxxxx
SECURE BOOT - disabled
LOCK STATE - locked
I booted into Recovery mode, but any of the options I select from the System recovery menu send me right back to the Fastboot screen.
Is there anything to be done at this point?
UPDATE: Problem solved. Research into the other variants of the LG G Pad lead me to the the LG Mobile Support Tool, which you can find by googling B2CAppSetup.exe.
Now, if you are stuck in a Fastboot loop as I was, I ended up having to restart the device while holding down the Power + Volume UP & DOWN. This brought up a screen displaying a bar code and the device MSN and IMEI number. Using this number return to the LG Mobile Support tool and select Options>Upgrade Recovery. Even if your device is already plugged in via USB, the software will not recognize the device -- you may want to double check to make sure your device drivers were installed prior to this step. Input your IMEI number into the box and restart the device in to download mode. It took a few attempts due to the quick action of Fastboot, but I was finally able to access the menu while USB was plugged in to the device and restarting while holding the Volume + key. Now you can continue with the installation and you will be back into your tablet in no time.
I have access to the device via usb / fastboot, adb is not registering. If anyone has any suggestions on what I can try, please let me know. I do not have a backup or a version of the OEM ROM. Every effort so far just sends me right back to the Fastboot screen with 3 options. Anything I can run from command prompt using fastboot alone that would help in this situation? Any way to do a factory restore without having an actual OEM image?
Well im stuck at the verizon screen too but for a different reason
JRSwole said:
So I just got an LG G pad 10.1 VK700 from Verizon the other day. I rooted the device on the first day but never really added any additional apps or software.
Another member in the household was using the tablet and it asked if they wanted to accept the VZW Update for KitKat 5.0. They downloaded the update, and now the tablet is stuck in a bootloop at the Fastboot screen.
There are only 3 options I can select from this screen in the top left using the volume keys: RESTART, RESTART BOOTLOADER & POWER OFF. Any time I select either of the restart options, the screen just goes blank and hangs. I have to manually power off, and upon turning back on I am right back to this limited Fastboot menu.
Bottom left reads:
FASTBOOT MODE
PRODUCT_NAME - E9LTE_VZW
VARIANT - e9lte_vzw Toshiba 16GB
HW VERSION - rev_10
BOOTLOADER VERSION - N/A
BASEBAND VERSION - N/A
CARRIER INFO - N/A
SERIAL NUMBER - VZ7005xxxxxxx
SECURE BOOT - disabled
LOCK STATE - locked
I booted into Recovery mode, but any of the options I select from the System recovery menu send me right back to the Fastboot screen.
Is there anything to be done at this point?
UPDATE: Problem solved. Research into the other variants of the LG G Pad lead me to the the LG Mobile Support Tool, which you can find by googling B2CAppSetup.exe.
Now, if you are stuck in a Fastboot loop as I was, I ended up having to restart the device while holding down the Power + Volume UP & DOWN. This brought up a screen displaying a bar code and the device MSN and IMEI number. Using this number return to the LG Mobile Support tool and select Options>Upgrade Recovery. Even if your device is already plugged in via USB, the software will not recognize the device -- you may want to double check to make sure your device drivers were installed prior to this step. Input your IMEI number into the box and restart the device in to download mode. It took a few attempts due to the quick action of Fastboot, but I was finally able to access the menu while USB was plugged in to the device and restarting while holding the Volume + key. Now you can continue with the installation and you will be back into your tablet in no time.
Click to expand...
Click to collapse
Hello I have the exact same model I got 28th my g4 and successfully rooted with kingroot and used supersume to change it to supersu. Everything was perfect and running fine and I tried an entropy engine I use on my other rooted phone and it was not help so I disabled it and rebooted like I have with my other one before and it stuck at that horrible red screen lol. I haven't done anything else major to alter anything to do with the OS like installing an OTA and I can only get to the same screens as you. My problem is I don't have a PC and haven't in a very long time and if I get to one I wouldn't know where to start out, last computer I owned has a floppy disk lol but I don't see how I would need to re flash the entire OS because of an entropy engine hickup. If you or anyone know of a way to slap this thing back to reality I would highly appreciate it. I got very familiar with the android os and how it works but never had a PC to go beyond a basic root so technically I'm still a noob in a way. I only care to expand dual window to other apps if I get it fixed cuz I'm not gonna risk screwing with it any more now than I have to, my luck is too bad lol thanks in advance
dadrumgod said:
Hello I have the exact same model I got 28th my g4 and successfully rooted with kingroot and used supersume to change it to supersu. Everything was perfect and running fine and I tried an entropy engine I use on my other rooted phone and it was not help so I disabled it and rebooted like I have with my other one before and it stuck at that horrible red screen lol. I haven't done anything else major to alter anything to do with the OS like installing an OTA and I can only get to the same screens as you. My problem is I don't have a PC and haven't in a very long time and if I get to one I wouldn't know where to start out, last computer I owned has a floppy disk lol but I don't see how I would need to re flash the entire OS because of an entropy engine hickup. If you or anyone know of a way to slap this thing back to reality I would highly appreciate it. I got very familiar with the android os and how it works but never had a PC to go beyond a basic root so technically I'm still a noob in a way. I only care to expand dual window to other apps if I get it fixed cuz I'm not gonna risk screwing with it any more now than I have to, my luck is too bad lol thanks in advance
Click to expand...
Click to collapse
If you are stuck in this particular Fastboot loop without a computer I am afraid your options are going to be very limited. The only thing I can imagine that you would be able to try is restarting the tablet while holding down the Power + Volume Down keys to access the stock System recovery menu. You can try to use Factory data reset and Wipe cache to see if that can resolve the issue, but for me every attempt to perform actions from this menu brought me right back to the Fastboot screen. The only other way I could communicate to the device in this scenario was using command line, and even then I could only access fastboot and not abd.
I would highly advise getting at least a cheap older laptop with Windows if you plan on rooting any device, otherwise the dangers will far outweigh the benefits. I'm just hoping some development comes along for the VK700 G Pad 10.1, at least a TWRP or CWM release.
JRSwole said:
If you are stuck in this particular Fastboot loop without a computer I am afraid your options are going to be very limited. The only thing I can imagine that you would be able to try is restarting the tablet while holding down the Power + Volume Down keys to access the stock System recovery menu. You can try to use Factory data reset and Wipe cache to see if that can resolve the issue, but for me every attempt to perform actions from this menu brought me right back to the Fastboot screen. The only other way I could communicate to the device in this scenario was using command line, and even then I could only access fastboot and not abd.
I would highly advise getting at least a cheap older laptop with Windows if you plan on rooting any device, otherwise the dangers will far outweigh the benefits. I'm just hoping some development comes along for the VK700 G Pad 10.1, at least a TWRP or CWM release.
Click to expand...
Click to collapse
Thanks for your response, I have unfortunately tried that too and wipe cache, reset , all back to fastboot. I figured it would be impossible without a pc. Oh yea my stock recovery says modified in the top left corner, but anyway I can get access to a PC But honestly it's been awhile since I even needed to use one and don't know exactly where to start, like navigating around, and how to install what software on the pc. I can't find anyone that will walk me through it locally or online and every tutorial I find is missing some lil step I need. I know Android in detail but after basic root my experience hits a brick wall. I'm capable of more jus got to get broke in on a pc again. Now I only care to root for stuff like freezing apps, gesture control, and really want to use any app in dual window. Ain't screwing with any system tweaks again it was pointless lol I guess I need all the right files and hit up the pc...can't really do worse no??
Sent from my VS986 using Tapatalk
JRSwole said:
If you are stuck in this particular Fastboot loop without a computer I am afraid your options are going to be very limited. The only thing I can imagine that you would be able to try is restarting the tablet while holding down the Power + Volume Down keys to access the stock System recovery menu. You can try to use Factory data reset and Wipe cache to see if that can resolve the issue, but for me every attempt to perform actions from this menu brought me right back to the Fastboot screen. The only other way I could communicate to the device in this scenario was using command line, and even then I could only access fastboot and not abd.
I would highly advise getting at least a cheap older laptop with Windows if you plan on rooting any device, otherwise the dangers will far outweigh the benefits. I'm just hoping some development comes along for the VK700 G Pad 10.1, at least a TWRP or CWM release.
Click to expand...
Click to collapse
Oh yea I almost forgot I got side tracked earlier. I know there is already a twrp, I have 2 versions (2.8...something and the next version strait off twrp site. I was the one guy it wouldn't flash through flashify for but others claimed it did. God knows really, but I'm gonna wait till I have a PC of my own before I touch my g4 but man the ability to open any app in dual window is just too damn sweet...if I could only change that one word on build prop to false without all the other hassle
Sent from my VS986 using Tapatalk
JRSwole said:
Now, if you are stuck in a Fastboot loop as I was, I ended up having to restart the device while holding down the Power + Volume UP & DOWN. This brought up a screen displaying a bar code and the device MSN and IMEI number. Using this number return to the LG Mobile Support tool and select Options>Upgrade Recovery. Even if your device is already plugged in via USB, the software will not recognize the device -- you may want to double check to make sure your device drivers were installed prior to this step. Input your IMEI number into the box and restart the device in to download mode. It took a few attempts due to the quick action of Fastboot, but I was finally able to access the menu while USB was plugged in to the device and restarting while holding the Volume + key. Now you can continue with the installation and you will be back into your tablet in no time.
Click to expand...
Click to collapse
I tried following your recommendation, but the LGMobile Support Tool said the device wasn't plugged in no matter which combination of buttons I pushed while running the Upgrade Recovery option, and I wasn't able to figure out how to get to download mode either.
gnomesinrome said:
I tried following your recommendation, but the LGMobile Support Tool said the device wasn't plugged in no matter which combination of buttons I pushed while running the Upgrade Recovery option, and I wasn't able to figure out how to get to download mode either.
Click to expand...
Click to collapse
If your problem is from an OTA failing due to taking it while modded and you can get to fastboot the following command might fix it:
Code:
fastboot erase cache
That will delete the OTA zip and break the bootloop.
I have just flash the custom 5.0.2 ROM using philz touch 6.48.4.
After I flashed the ROM, I reboot to the philz recovery and flashed back to cwm 6.0.4.8.
However, the device stuck on the LG logo screen.
I have try to enter Download mode/Emergence mode/Hard reset mode/Recovery, but all of them I cannot go into.
Please help! Thank you for your helping!!
pchuen said:
I have just flash the custom 5.0.2 ROM using philz touch 6.48.4.
After I flashed the ROM, I reboot to the philz recovery and flashed back to cwm 6.0.4.8.
However, the device stuck on the LG logo screen.
I have try to enter Download mode/Emergence mode/Hard reset mode/Recovery, but all of them I cannot go into.
Please help! Thank you for your helping!!
Click to expand...
Click to collapse
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
hawkwind212 said:
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
Click to expand...
Click to collapse
Thank you for replying.
I cannot do anythings since I cannot enter into download mode.
I pressed volume key + and - and insert the usb cable to computer. There is nothing happened, computer dose not show the devices attached and the phone stay in the LG logo screen.
Also, I cannot use adb commands to force the phone enters into download mode as it shows nothings under "List of devices".
Is there any methods I can go into the download mode???
Thank you!
pchuen said:
Thank you for replying.
I cannot do anythings since I cannot enter into download mode.
I pressed volume key + and - and insert the usb cable to computer. There is nothing happened, computer dose not show the devices attached and the phone stay in the LG logo screen.
Also, I cannot use adb commands to force the phone enters into download mode as it shows nothings under "List of devices".
Is there any methods I can go into the download mode???
Thank you!
Click to expand...
Click to collapse
If your phone shows LG start screen, it should go into Download mode. I had similar problem few days ago while I was testing some kernel patches, it just froze on the LG screen. Solution was to unplug it, remove it's battery, SIM & SD (you don't have to remove SIM & SD, I just work that way) , make sure it's off, return battery back, press Vol + & Vol - at the same time and plug-in the USB cable.
Before that, make sure you have installed LG Unified driver (can be obtained via LG's software from support site), because without that Windows won't recognise your device.
After that, once you make your phone usable with Freegee/whatever you use to install initial recovery, flash official TWRP, because others are too old - that Philz CWM is old but still working with Lollipop but not work good and is tends to lock itself into a bootloop if you use hardware keys to enter; that other one, from GPRO_recovery APK is not supported and not working well (for me since day one), so it should be replaced as soon as possible.
Also, I can suggest you to flash your phone from stock 4.1 (not KitKat), root, flash recovery via freegee and after reboot update to latest official TWRP via Flashify.
hawkwind212 said:
Your boot loader is broken. Gonna have to get to the down load mode and reinstall either the or the stock. You can probably flash the recovery with .IMG file with lg flashing tool. Nerdy blond's twrp is one of those files that you can use. You can even try installing it first with the adb shell command, you can get the instructions at the same place where you download.
http://forum.xda-developers.com/showthread.php?t=3144369
Click to expand...
Click to collapse
ShadySquirrel said:
If your phone shows LG start screen, it should go into Download mode. I had similar problem few days ago while I was testing some kernel patches, it just froze on the LG screen. Solution was to unplug it, remove it's battery, SIM & SD (you don't have to remove SIM & SD, I just work that way) , make sure it's off, return battery back, press Vol + & Vol - at the same time and plug-in the USB cable.
Before that, make sure you have installed LG Unified driver (can be obtained via LG's software from support site), because without that Windows won't recognise your device.
After that, once you make your phone usable with Freegee/whatever you use to install initial recovery, flash official TWRP, because others are too old - that Philz CWM is old but still working with Lollipop but not work good and is tends to lock itself into a bootloop if you use hardware keys to enter; that other one, from GPRO_recovery APK is not supported and not working well (for me since day one), so it should be replaced as soon as possible.
Also, I can suggest you to flash your phone from stock 4.1 (not KitKat), root, flash recovery via freegee and after reboot update to latest official TWRP via Flashify.
Click to expand...
Click to collapse
Thank you for your detail reply.
I have tried to reinstall the LG driver and try to enter download mode again.
The screen is still stuck on LG logo and I cannot find the device in hardware manager (cannot recognize it).
I cannot do anythings until it can recognize it.
(Is it the bootloader is broken? and can I fix it?)
Thank you very much and waiting for your reply soon.:good:
pchuen said:
Thank you for your detail reply.
I have tried to reinstall the LG driver and try to enter download mode again.
The screen is still stuck on LG logo and I cannot find the device in hardware manager (cannot recognize it).
I cannot do anythings until it can recognize it.
(Is it the bootloader is broken? and can I fix it?)
Thank you very much and waiting for your reply soon.:good:
Click to expand...
Click to collapse
Which version of Windows are you using? It should be displayed under Serial ports in Device manager (named something like LGE Serial device) and LGFlashTool should recognise it immediately. I can't make you a screenshot/check for real name because I'm running Linux right now and can't reboot.
Also, try with another cable/port, remove all other android drivers you may have (Samsung's, Google's...) and disable antivirus.
ShadySquirrel said:
Which version of Windows are you using? It should be displayed under Serial ports in Device manager (named something like LGE Serial device) and LGFlashTool should recognise it immediately. I can't make you a screenshot/check for real name because I'm running Linux right now and can't reboot.
Also, try with another cable/port, remove all other android drivers you may have (Samsung's, Google's...) and disable antivirus.
Click to expand...
Click to collapse
It does not work on Windows 7 and XP.
I did not find any LGE XXX under Serial ports part.
Thank you!
pchuen said:
It does not work on Windows 7 and XP.
I did not find any LGE XXX under Serial ports part.
Thank you!
Click to expand...
Click to collapse
Hm.... Phone shows that it have entered download mode? Black screen, centered gray message and "DOWNLOAD MODE" red text?
ShadySquirrel said:
Hm.... Phone shows that it have entered download mode? Black screen, centered gray message and "DOWNLOAD MODE" red text?
Click to expand...
Click to collapse
No... nothing happens, just showing LG logo...
pchuen said:
No... nothing happens, just showing LG logo...
Click to expand...
Click to collapse
OK, it doesn't enter download mode. So, step by step:
- remove battery and leave it for 15-30 seconds, return battery
- press Vol+ and Vol- at the same time and keep them pressed,
- plug USB cable in while keys are pressed
It should immediately put you into download mode, with no LG screen, just black screen with gray box and red text I've described to you.
ShadySquirrel said:
OK, it doesn't enter download mode. So, step by step:
- remove battery and leave it for 15-30 seconds,
- press Vol+ and Vol- at the same time and keep them pressed,
- plug USB cable in while keys are pressed
It should immediately put you into download mode, with no LG screen, just black screen with gray box and red text I've described to you.
Click to expand...
Click to collapse
I understand what download mode screen is.
I followed your methods, bur I still cannot enter it and the computer cannot recognize that.
Sorry for disturbing :crying:
pchuen said:
I understand what download mode screen is.
I followed your methods, bur I still cannot enter it and the computer cannot recognize that.
Sorry for disturbing :crying:
Click to expand...
Click to collapse
So, whatever you try to do, phone just shows LG logo, not even a message in an upper left corner?
I'm running out of ideas. I have exact same variant (E988) but only time it didn't want to enter download mode this way was when cable I was using was broken...
ShadySquirrel said:
So, whatever you try to do, phone just shows LG logo, not even a message in an upper left corner?
I'm running out of ideas. I have exact same variant (E988) but only time it didn't want to enter download mode this way was when cable I was using was broken...
Click to expand...
Click to collapse
I have changed the cable, but it is the same.
I hope I didn't end up with the proverbial brick, but I think I did. I was trying to restore my D-850 G3 to a native CM12 state to give to a family member. I did a good job with it but got stuck on not being able to change some settings. So I decided to wipe the cache and do a fresh install of CM12. I got far too aggressive and ended up wiping out everything. I have no recovery file on internal or external storage that I can access, and it appears the entire operating system is gone. I can't boot into recovery. When I try Power+volume up, nothing happens. I just get the LG startup screen and it's locked there. TWRP was on the phone but now I don't know if it is or not. If I could get to a menu and flash TWRP then CM12, I'd be OK I think (I just did that on the OnePlus 3). But I don't know how to get into the bootloader. I can probably find another way to load files onto the microSD card if that's necessary.
I tried downloading and using various LG support tools but I can't even get it recognized on USB - no adb, no fastboot, no way to get to anything.
I'd love to be able to rescue this phone from death but it's looking bleak.
Is there any hope here?
Do you remember which software you used?
I tried it on my laptop and I know it works with other phones (that aren't bricked), but all the G3 does is charge.
I installed LGMovileDriver_WHQL_ver4.04 and nothing.
Also LG PC Suite and it doesn't see anything.
I'm on Windows 10 - I do have an old PC running Win7.
If I could just get the device recognized via USB, I think it's salvagable.
To enter twrp its "power" + "volume DOWN"
aaronkatrini said:
To enter twrp its "power" + "volume DOWN"
Click to expand...
Click to collapse
...And select " Factory reset " then " Yes " and you'll boot in TWRP !
aaronkatrini said:
To enter twrp its "power" + "volume DOWN"
Click to expand...
Click to collapse
I wish that worked but only resulted in the LG splash screen staying on until I removed the battery.
Hello Everyone!
I recently tried to root my wileyfox swift but failed miserably. I did the following when fastbooting the recovery image -> fastboot flash system ****.img.
However, i realized my mistake too late, and now my phone is all messed up!
The phone doesnt show anything when i try to start it and i cant access fastboot again, to undo my mistake. My device manager recognizes my phone when its plugged in to my computer but i cant access any files.
Am i screwed or is there any solution to this?
Thanks in advance!!
Try to access the bootloader with the hardware button combo first (volume down + power / volume up + power). If you get into recovery, you will be able to get to the bootloader with adb or a menu entry. Depends on what recovery you have installed for the latter.
In case you have no access to the bootloader (proper soft brick), go for the QFIL method. Avoid using it unless there is no other option.
Here is the thread:
http://forum.xda-developers.com/wileyfox-swift/general/how-to-set-device-tampered-to-false-t3276317
Cant access bootloader.
However, tried your second option and it went well until i got "SaharaDownload fail" at the last step, and now my computer doesnt recognize the phone in device manager. It does not show anywhere that my phone is connected.
narmista said:
Cant access bootloader.
However, tried your second option and it went well until i got "SaharaDownload fail" at the last step, and now my computer doesnt recognize the phone in device manager. It does not show anywhere that my phone is connected.
Click to expand...
Click to collapse
Does the phone give any indication of being connected? Notification light, starting the display, etc?
If yes, make sure the phone is in the correct mode and check the drivers - some of the other forum members mentioned this and the gymnastics around the battery. This would be on my to-do list. The device might come up on the device manager as different one, so monitor the manager for any changes once you connect the device.
If you happen to have Windows 7 device laying at you house, you can try with it (if only not to worry about compatibility and sporadic Win10 behaviour).
It will be a good idea to check the turkish website for General Mobile 4G (one of the Android one derivatives of the hardware) where some people have faced similar problems using the same tool.
narmista said:
Cant access bootloader.
However, tried your second option and it went well until i got "SaharaDownload fail" at the last step, and now my computer doesnt recognize the phone in device manager. It does not show anywhere that my phone is connected.
Click to expand...
Click to collapse
If you need my help via TeamViewer then WhatsApp me at +27799261595 or pm me
Finally got my phone back on the device manager! However, I still get sahara error when trying the back to false method.
imgur.com/a/FsSX0
*It says no port available since i removed the phone*
LG Pad Verizon 10.1 VK700
My tablet was stuck in upgrading firmware mode whenever I booted it up. Used LG tool to flash stock firmware, and it would hang at 28%.
Went into recovery mode and clicked wipe cache, and when I rebooted it now says
boot certification verify and the top left with the LG logo and it hangs here.
Can no longer enter download mode to reflash.
Recovery mode still works, but none of the options work
*Wipe cache (top of screen will say boot certification verify and hang)
*Restore factory defaults (will hang at Restoring Factory Settings)
*Safe mode (reboots to boot certification verify and LG logo)
Figured I could try to use SRK tools, but nothing comes up in my Device manager when I plug it in anymore (not even qhsusb_bulk)
When I power it off and on with usb plugged in, windows will occasionally make the new device detected sound, but then make the device disconnected sound about a second later, so nothing will appear in device manager.
Does anybody have any suggestions or any way I can get this thing running again? Or anyway I can get my computer to even recongnize it as qhsusb_bulk so I can use SRK tools?