Related
Using stock 4.0.1 here, and have always had the brightness set to auto. But it never seems to do anything? If I am in a light or dark room it is always dark, often darker than the lowest brightness setting.
I am just worried that the sensor might not be working, if the phone needs to be sent back it needs to be done soon. Anyone else with this issue? I know the sensor that turns off the phone screen when in call works, but the auto brightness might use a different one.
Fatila said:
Using stock 4.0.1 here, and have always had the brightness set to auto. But it never seems to do anything? If I am in a light or dark room it is always dark, often darker than the lowest brightness setting.
I am just worried that the sensor might not be working, if the phone needs to be sent back it needs to be done soon. Anyone else with this issue? I know the sensor that turns off the phone screen when in call works, but the auto brightness might use a different one.
Click to expand...
Click to collapse
Auto brightness is just simply low on this device. There are some hacks in the dev section to increase it...but they don't work on my ROM.
I just started using juicedefender to adjust the auto birghtness
So auto brightness itself is broken and sensor is pry OK? I wonder if there are any apps to test it.
Fatila said:
So auto brightness itself is broken and sensor is pry OK? I wonder if there are any apps to test it.
Click to expand...
Click to collapse
Simply put a bright light to it and watch the screen brighten up. The sensor is fine.. auto brightness simply is a little too conservative, probably because more people would moan about battery life than screen brightness.
My auto brightness works just fine. Sometimes I have to the screen off then on for it to adjust. Other than that, the levels are fine. I'm on 4.0.3.
Sent from my Galaxy Nexus using XDA App
Just curious if anyone else is having this issue.
I have the box checked, but I found myself manually adjusting, thinking it just wasn't very sensitive. I turned on auto brightness, moved the slider all the way to dim, went out to the sunlight, and it had no effect. Unchecked, and rechecked the box, restated the phone, did the opposite in a dark room... No effect.
Swifted from my LGOG-Pro
davidusr said:
Just curious if anyone else is having this issue.
I have the box checked, but I found myself manually adjusting, thinking it just wasn't very sensitive. I turned on auto brightness, moved the slider all the way to dim, went out to the sunlight, and it had no effect. Unchecked, and rechecked the box, restated the phone, did the opposite in a dark room... No effect.
Swifted from my LGOG-Pro
Click to expand...
Click to collapse
I believe the slider sets the maximum brightness. So when you go out in the sunlight the spot where you placed it is the brightest it will get.
mrfeuss said:
I believe the slider sets the maximum brightness. So when you go out in the sunlight the spot where you placed it is the brightest it will get.
Click to expand...
Click to collapse
I thought that also... But when I had the slider at full bright, with auto turned on, in a pitch black room, it should have dimmed, correct?
Swifted from my LGOG-Pro
Looks like my phone might be doing the same thing... I'm wondering if I should swap my phone out before it's too late to exchange it for an S4.
+1 in the same boat
Sent from my LG-E980
davidusr said:
I thought that also... But when I had the slider at full bright, with auto turned on, in a pitch black room, it should have dimmed, correct?
Click to expand...
Click to collapse
Yeah, you're right. Do you have a screen protector on that might be interfering with the ambient light sensor, by any chance?
mrfeuss said:
Yeah, you're right. Do you have a screen protector on that might be interfering with the ambient light sensor, by any chance?
Click to expand...
Click to collapse
Butt naked! No case, nothing... I see I'm not alone though.
Swifted from my LGOG-Pro
davidusr said:
Butt naked! No case, nothing... I see I'm not alone though.
Swifted from my LGOG-Pro
Click to expand...
Click to collapse
Same here must be a bug. But I don't use that function so no biggie for me.
Sent from my Nexus 7 using xda premium
---------- Post added at 08:02 PM ---------- Previous post was at 07:49 PM ----------
nthknd said:
Same here must be a bug. But I don't use that function so no biggie for me.
Sent from my Nexus 7 using xda premium
Click to expand...
Click to collapse
Seems to work with a third party app so I think its software related
Sent from my LG-E980 using xda premium
I don't think it's a bug. The auto brightness on some LG phones doesn't work like the rest of Android phones. On some LG phones, you set the brightness to a certain level and the auto brightness will work around that particular level.
Say you have it at 75% brightness and auto brightness on, the level will go up to maybe about 85% while outdoors and maybe to about 65% in a dim room. Set it at 35% brightness with auto brightness on, the level goes up to 45% in a bright area and 25% in a dark area. That's how my old iPhone 4 used to work.
Sharpshooterrr said:
I don't think it's a bug. The auto brightness on some LG phones doesn't work like the rest of Android phones. On some LG phones, you set the brightness to a certain level and the auto brightness will work around that particular level.
Say you have it at 75% brightness and auto brightness on, the level will go up to maybe about 85% while outdoors and maybe to about 65% in a dim room. Set it at 35% brightness with auto brightness on, the level goes up to 45% in a bright area and 25% in a dark area. That's how my old iPhone 4 used to work.
Click to expand...
Click to collapse
The way you described the functionality is what I have witnessed mine doing. I had to play around with it for a few days before I figured out what it was doing. No matter which level of brightness I set, auto brightness will adjust up and down from there based on ambient lighting. I do like having this option since it basically lets you further tweak the auto brightness to a comfortable level. On my other phones, a lot of the times the auto brightness was either to bright or too dark compared to what I would have preferred.
I thought there was something wrong with the auto brightness on mine as well. I have it on 70% auto bright set and it never seems to change. I have a screen protector but it has cutouts around the camera and other sensors and ear piece so I knew it wasn't that and I also tested it prior to putting the screen protector on.
Seems odd that LG would go a different route on what auto brightness is compared to the rest of the Android OEM's. sort of defeats the purpose but perhaps that is why we have to keep the setting so high to begin with.
RaptorMD said:
I thought there was something wrong with the auto brightness on mine as well. I have it on 70% auto bright set and it never seems to change. I have a screen protector but it has cutouts around the camera and other sensors and ear piece so I knew it wasn't that and I also tested it prior to putting the screen protector on.
Seems odd that LG would go a different route on what auto brightness is compared to the rest of the Android OEM's. sort of defeats the purpose but perhaps that is why we have to keep the setting so high to begin with.
Click to expand...
Click to collapse
I got mine to work. Its kinda strange. I was playing around and I shot a video as I played the video back I hit the menus button and there is a setting for auto dimming so I check it and my phone dimmed so then I checked to see if my main auto brightness would work so I went into settings and checked auto bright there too and the screen dimmed. Havent been outside yet but before this the setting did nothing see if you guys can get it to work on yours.
Sent from my LG-E980 using xda premium
nthknd said:
I got mine to work. Its kinda strange. I was playing around and I shot a video as I played the video back I hit the menus button and there is a setting for auto dimming so I check it and my phone dimmed so then I checked to see if my main auto brightness would work so I went into settings and checked auto bright there too and the screen dimmed. Havent been outside yet but before this the setting did nothing see if you guys can get it to work on yours.
Sent from my LG-E980 using xda premium
Click to expand...
Click to collapse
mine too, the 'auto brightness' seem doesn't work properly, just got dimmed, but not working as well as other phones's auto brightness did
Sharpshooterrr said:
I don't think it's a bug. The auto brightness on some LG phones doesn't work like the rest of Android phones. On some LG phones, you set the brightness to a certain level and the auto brightness will work around that particular level.
Say you have it at 75% brightness and auto brightness on, the level will go up to maybe about 85% while outdoors and maybe to about 65% in a dim room. Set it at 35% brightness with auto brightness on, the level goes up to 45% in a bright area and 25% in a dark area. That's how my old iPhone 4 used to work.
Click to expand...
Click to collapse
Yes, autobrightness on LG works this way since ICS was rolled out for LG Nitro. At 100% even with autobrightness screen will not dim, and at 0% level with or w/o autobrightness screen will not light up.
RaptorMD said:
Seems odd that LG would go a different route on what auto brightness is compared to the rest of the Android OEM's. sort of defeats the purpose but perhaps that is why we have to keep the setting so high to begin with.
Click to expand...
Click to collapse
No, it's right way because brightness sensor works different than human eye and like was said here other phones usually set brightness too dim or too bright using that sensor.
I also think the work Auto Brightness is on the phone E980 strange ... I do not see any change in brightness depending on the ambient light ... Not like all the other android phones
Billy Madison said:
Yes, autobrightness on LG works this way since ICS was rolled out for LG Nitro. At 100% even with autobrightness screen will not dim, and at 0% level with or w/o autobrightness screen will not light up.
No, it's right way because brightness sensor works different than human eye and like was said here other phones usually set brightness too dim or too bright using that sensor.
Click to expand...
Click to collapse
If that is the case, why is there no effect of ambient light on the screen??? The brightness remains the same whatever be the light condition.
I thought my phone had the same issue as everyone else but noticed this weekend when I stepped into a very bright area my screen automatically adjusted the brightness to a higher setting.
Sent from my LG-E980 using Tapatalk 2
now works correctly in this firmware: http://forum.xda-developers.com/showthread.php?t=2419802
Mine has worked from day one and better than my GnoteII I upgraded from... As others have said, it's configured around the amount of brightness you originally set it to.
where is the light sensor of the OGPro located...?
In a 100% dark area (movie theater, etc.), when I flick my wrist to turn on the watch, it turned on with full brightness on. It stay there indefinitely... sometimes it'll go away by itself, other time I have to do something, like swiping cards before the screen will go dim.
In a semi (50% dark), the screen will not turn on to its full brightness, but at... dim. WTH?!
Stick watch face?
I've noticed this as well (when driving at night). Since it turns on all the time (I steer with the same hand I wear my watch on), I've noticed lots of strange behavior. Sometimes it turns on very bright, and then goes back to sleep. Sometimes it turns on bright and then dims to the minimal brightness that it should be. Sometimes it turns on with the appropriate, minimum brightness. There seems to be no rhyme or reason to it. I'm running a stock watch face, and have very few apps installed.
As someone offered up 'muting' the watch while driving in another thread as a possible solution, it doesn't help me. Whether or not the watch is muted, it still wakes up all the time, and varying brightness levels.
bruceo said:
Stick watch face?
Click to expand...
Click to collapse
Emm...you mean stock watch face? If yes, I am using the classic one.
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
v3ngence said:
Auto brightness works well for me with ambient mode ON, I think I remember it being buggy with ambient mode OFF, what is yours set to?
Click to expand...
Click to collapse
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
pakure said:
Cut it out guys. ..or this thread will be locked
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
^^This...well probably not locked
I did a little thread cleaning to remove the off topic arguments about using a device (phone or watch) in a movie theatre. There were a lot of people who quoted these posts, and unfortunately I had to remove these posts as well...sorry for that.
Here is the thing, this thread is about the buggy behavior of the watch waking up at full brightness. It doesn't matter if it is in a theatre, whilst driving the car, or you just woke up in the middle of the night and want to check the time. More that one person has reported the issue and there has been a proposed fix...please keep the thread focused on finding the root causes, fixes, work arounds, etc. No matter what, please knock off the name calling, that will only get you into trouble!
Thanks!:good:
lanwarrior said:
I have ambient mode OFF to save battery. Will turning it on fix the issue? I use Sleep as Android for sleep tracking and turn Ambient off and it lights up here and there at night.
Click to expand...
Click to collapse
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
v3ngence said:
Try turning ambient mode ON during the day,
I just tested and with it off the screen does occasionally come on at full brightness even in the dark. With ambient on it only comes on bright the first time, quickly dims, and stays dim until taken into daylight :good:
Click to expand...
Click to collapse
Interesting. So with ambient ON, it still turn on at full brightness but momentarily. I'll test this and will report back.
Well, I'm having the opposite problem following the last update.
it frequently (at work right now, for example) comes up EXTREMELY dim, I'd guess maybe 5x dimmer than brightness setting '1'.
I'm setting it to '1' as a workaround for now.
- Frank
Wait for the next 5.0 update. .there's options like theater mode. ..and other brightness modes coming to wear
Sent from my SM-N910C using Tapatalk 2
Smart Brightness for Moto 360
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Instant buy. Thanks allot, that makes in combination with the 5.0 update, Watchmaker and Bubble Cloud Launcher my watch perfect.
[email protected] said:
Try the application "smart brightness for moto 360" from the Google play. With this application you can set a minimum brightness and better view in low light environments.
With the minimum set to 20% and auto brightness on you will get better battery life and better experience in dark situation.
Click to expand...
Click to collapse
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Smart Brightness for Moto 360
TheGoD said:
Sadly, the auto brightness doesn't seem to work...yeah, just realized that after using it for a week.
Click to expand...
Click to collapse
The application really works. If you want see how works, do the followings steps:
1. open Smart Brightness App
2. Turn on the application
3. Set the minimum brightness to 20%
4. Turn on the auto brightness.
5. Go to a dark room and wait until Moto360 to turn off the screen.
6. Touch the screen to wakeup the screen. (This is necessary because the Smart Brightness application start when the screen is on and stop when the screen is off).
You will see a clear image after this steps. Now go to the smart brightness app and turn it off (Using the on/off switch located at the top of the screen). Repeat the steps 5 and 6. Now the screen will look dark, because it is the factory auto brightness.
I recommend to use the 7 days trial. After 7 days after using it you will notice the difference.
I'm using this app over a month and works fine. Please let me know any other concern about the application.
For me its not the low light the problem as this works, is outside doens't go bright enough in direct sunlight
Enviado do meu HTC One através de Tapatalk
no problems
i have always used it, never experienced any problems
Moto 360 on the second generation does not work
Fabio
With most Android Wear watches lacking an ambient light sensor, this Huawei one included, I'm wondering if you often have to manually adjust brightness, either not to be blinded at night, or to actually see the screen in daylight.
As far as I understand, an awake watch will get brighter, and ambient mode will be darker. There's also the double and triple crown clicks for theater (screen off) and sunlight (brighter) modes. And things like Display Brightness for Wear, or through AutoWear for finer grained and somewhat automated results.
And that's what I'm really wondering: if I can get a satisfying custom behaviour through AutoWear, by slices of day time (eg, brightest at noon, and progressively darker as night approaches), that'd be fine enough to me. But if I constantly have to adjust things manually, I fear that would quickly become annoying (I can spend a lot of energy tweaking automation to ensure I can be as lazy as can be afterwards ).
Do you choose a middle ground brightness setting and are fine with it most of the time, except when you rarely have to double or triple crown click? Do you find yourself manually adjusting brightness a few times a day? Do you constantly fiddle with brightness settings?
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
I missed it greatly from my urbane, so I went back to it.
suzook said:
I missed it greatly from my urbane, so I went back to it.
Click to expand...
Click to collapse
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
noraef said:
Uh? Missed what? The Urbane has no ambient light sensor either, does it?
Click to expand...
Click to collapse
UH! Yeah it does! Its by the lugs.
suzook said:
by the lugs
Click to expand...
Click to collapse
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Crown
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
gaikokujin said:
So, by hitting the crown three times, the brightness goes up one level?
Also, is the crown button function behavior customizable?
Thanks!
Click to expand...
Click to collapse
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
atoy74 said:
It actually goes to max brightness only until the screen goes back to sleep.
Sent from my SM-T810 using Tapatalk
Click to expand...
Click to collapse
I see, thanks.
I don't change it often at all. Most of the time 2 or 3 has been plenty bright for me, and the triple click to up it a bit works pretty well...
noraef said:
You're speaking of the two holes for the mic? Anyway, I'm not intested in the Urbane at all, so it's completely off topic.
What I'm interested in is how often do people with the Huawei watch feel the need to manually change brightness settings.
Click to expand...
Click to collapse
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Under direct sunlight, it's not always that easy to see even with the bright 3-click sunlight mode. But generally, twisting my wrist a little to avoid direct reflections, or at worst covering it a bit with my other hand, is enough.
noraef said:
Have the watch since tuesday ("Active", ie black, with single layer leather) And I agree: most of the time, 2 or 3 are enough. 1 is actually even too bright to me at night, especially since I'm seemingly unable to have ambient brightness get as low as how bright it is awake at 1 (is ambient brightness level fixed?).
Click to expand...
Click to collapse
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
agentdr8 said:
Ambient mode brightness is not configurable on the watch, but certain 3rd-party watchfaces offer this setting. I'm using Skymaster and it offers different brightness for ambient mode.
Click to expand...
Click to collapse
Does that setting only apply to the actual watch face, or to the whole display? I've managed to make it dimmer with a partially transparent black layer in WatchMaker, but it doesn't apply to cards previews, or icons such as mute...
SWapp True Dark allows for actually adjusting the brightness of the whole ambient display, which is already great, but I'd rather have that manageable through Tasker (to have it auto adjust by time of the day). Have asked João if this could be implemented in AutoWear, so maybe it'll end up manageable through that.
Seems quite crazy to me this setting is not available by default. Reminds me, even though I think Android is the best OS of its kind, how lame I find it without the truckload of customization I lay over it...
I have 8 days ago my Huawei SW. It's my first SmartWatch and I'm really disappointed not to do anything with Tasker and Android Wear to adjust brightness to my liking clock automatically.
On the day I need more brightness when I'm out and at night the minimum brightness of the screen saver is very strong.
The bothers me most at the moment is so intense brightness of screen saver at night. No achievement make it more tenuous. Anyone know if there is any app that you can do?
Hopefully one of the experts and boys of this site something to be developed further manipulate Androi tasker and wear.
I've been using Display Brightness for Wear. It allows for different brightness settings for day and night in different situations. I wish it was more customizable or there were some ways to control brightness with tasker. Unfortunately, I've been unable to find those.
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
brizey said:
Autowear just needs to be able to receive a message that ambient is selected. It thinks the watch is off instead of in ambient. Frankly, though, SWapp does what I need. I also use WatchMaker faces and customize the dim mode to my liking.
Click to expand...
Click to collapse
I {o] [URL]v I they're t5ttpp[emoji12] rr[/URL]way oo{o[oooooo] 599d55t
maximus96 said:
i use Wear Mini Launcher and have it set to show the widgets before the apps, so one swipe to the right gets me a brightness slider. Its very each to adjust this way. With Wear Mini Launcher I can also quickly set my phone to silent/vibrate mode, turn on flashlight, ping the phone even if the phone is on vibrate, etc
Click to expand...
Click to collapse
atoy74 said:
I don't touch it at all. I have it set to 4 and could even get away with 3 if I want. When you need a brightness boost just hit the crown three times and you're set.
Click to expand...
Click to collapse
wait...WAT?! i've never known this...btw it doesn't work with Android Wear 2.0 preview 2
I've thought of something somewhat cool but I'm no developer.
What if we can use our cellphone's ambient light sensor to sync with the watch so that the watch can get both bright and/or dim when needed?
Theoretically this will function correctly if your phone isn't in your pocket all the time.
Sent from my SM-G935T using XDA-Developers mobile app
Im not sure if these watches have auto brightness but im assuming they dont as there is nothing for that in the settings.
So what I did is with tasker and autowear i wrote a task that looks at my phone brightness every time the screen turns on and off and adjusts the wathc brightness to the same +15% (as it was a tad dark)
Anyone using a different way of auto adjusting the brightness?
Attached it
So i set some minimum values for watch brightness which is 50
also when i set my watch birghtness same as phone it was a bit dark so i added 10* in the one formula where it says *1.1
you will have to play with it
I created a action so it will run when screen turns on or off
HW2 has auto brightness, test with put it under a lamp
Grumps said:
Im not sure if these watches have auto brightness but im assuming they dont as there is nothing for that in the settings.
So what I did is with tasker and autowear i wrote a task that looks at my phone brightness every time the screen turns on and off and adjusts the wathc brightness to the same +15% (as it was a tad dark)
Anyone using a different way of auto adjusting the brightness?
Click to expand...
Click to collapse
I've tried to do the same but couldn't get it to work because my tasker skills are lacking. Please share your tasker profile and task(s).
dersie said:
HW2 has auto brightness, test with put it under a lamp
Click to expand...
Click to collapse
I know but hw2 sucks....
JimSmith94 said:
I've tried to do the same but couldn't get it to work because my tasker skills are lacking. Please share your tasker profile and task(s).
Click to expand...
Click to collapse
just added it to my first post
Grumps said:
Im not sure if these watches have auto brightness but im assuming they dont as there is nothing for that in the settings.
So what I did is with tasker and autowear i wrote a task that looks at my phone brightness every time the screen turns on and off and adjusts the wathc brightness to the same +15% (as it was a tad dark)
Anyone using a different way of auto adjusting the brightness?
Attached it
So i set some minimum values for watch brightness which is 50
also when i set my watch birghtness same as phone it was a bit dark so i added 10* in the one formula where it says *1.1
you will have to play with it
I created a action so it will run when screen turns on or off
Click to expand...
Click to collapse
Thanks for the task but shouldn't there be a profile to go with it? I'm not sure, but I think if you export the profile instead, the associated tasks get exported with it.