Hi guys,
I briefly describe the situation: I've got a "working" system ROM (CM11) which is rebooting after about 30 seconds from home screen boot; I decided to do a full wipe, just to make the thing faster; now the problem, when I try to wipe everything TWRP says everything is done well, but nothing changes, it means I've got the same old stuff on my phone. What can I do? Thanks in advance.
PS. I also tried to go back to stock with factory image of Android 4.3, but it get stuck on writing 'system'. It seems everything is read only!
INFO: TWRP 2.6.3.2, CM 11 M12
Emmc fried.
Related
[Problem Solved]
Method is in my next post.
-------
Dear Friends!
Salaam!
I decided to updated my ROM to JB4.2. In order to do this, I formatted my memory card (which deleted all data including old backup) and made fresh backup using Clockword Recovery.
After that when I started the cell, it was on loop. LG logo appears and after that boot-screen logo appear and after that cell phone restarts.
I installed few roms, and same thing is happening again and again. Phone starts, LG logos appears, Rom boot screen appears and sometime language selection shows and phone starts again. This is happening again and again.
- I tried to restore my backup but no sucess.
- I have wiped every thing (Factory reset, Cache, Dalvik and even Batt Status).
- I'm using latest official recovery CWR.
- I tried, Avatar, Pac Rom, CM10, ICS and other too. But no success.
Kindly guide. Highly appreciated.
Looking forward.
---
Dr Faryal Saeed Abdal
I am having the EXACT same issue!
faryal said:
Dear Friends!
Salaam!
I decided to updated my ROM to JB4.2. In order to do this, I formatted my memory card (which deleted all data including old backup) and made fresh backup using Clockword Recovery.
After that when I started the cell, it was on loop. LG logo appears and after that boot-screen logo appear and after that cell phone restarts.
I installed few roms, and same thing is happening again and again. Phone starts, LG logos appears, Rom boot screen appears and sometime language selection shows and phone starts again. This is happening again and again.
- I tried to restore my backup but no sucess.
- I have wiped every thing (Factory reset, Cache, Dalvik and even Batt Status).
- I'm using latest official recovery CWR.
- I tried, Avatar, Pac Rom, CM10, ICS and other too. But no success.
Kindly guide. Highly appreciated.
Looking forward.
---
Dr Faryal Saeed Abdal
Click to expand...
Click to collapse
it appears you have solved your problem ... if that is correct , can you post how did you solve it ? for other people assistance
thanks
Thanks to the XDA, slimbaba (Mohammad Ali) and expression104 and devcon69 from TipidCP.com
Mohammad Ali was a big help.
Problem was with my USB drivers which I couldn't flash phone properly.
The most useful links for flashing are
http://www.tipidcp.com/viewtopic.php?tid=33686&page=1
http://wiredsoup.blogspot.com/2013/02/lg-optimus-su640-comfirmed-working.html
I'll be happy to help, if any one needed.
Hi,
Recently my brother gave up on his G-Nexus due to some complications that I soon discover. After he gave up reviving his phone, I took the liberty to try to ''revive'' his phone and found the same frustration that plague my brother.
Here's the thing:
1. I reflashed STOCK ROM + UNROOT. (tried 4.0.4/ 4.2.2/ 4.3. No success)
2. the phone is unable to BOOT, just BOOT LOOPs.
3. CAN boot into FASTBOOT.
4. unable to enter STOCK RECOVERY. (or in any rare case I could, cleared data, but bootloop persists).
5. fastboot flashed recovery TWRP and CWM , cleared data, reboot, and bootloop persist.
I'm out of option. I've googled for hours and nothing seems to help. Hoping the members here could provide assistance.
I've sent the phone for a troubleshoot, and the man told me it was the motherboard that was the case.
The thing with this is that I've flashed different stock ROMS and wasn't able to boot, not one successful boot.
My theory is that I've had a corrupted NAND?
Could anyone help me?
Thanks in advance.
blooddoom said:
Hi,
Recently my brother gave up on his G-Nexus due to some complications that I soon discover. After he gave up reviving his phone, I took the liberty to try to ''revive'' his phone and found the same frustration that plague my brother.
Here's the thing:
1. I reflashed STOCK ROM + UNROOT. (tried 4.0.4/ 4.2.2/ 4.3. No success)
2. the phone is unable to BOOT, just BOOT LOOPs.
3. CAN boot into FASTBOOT.
4. unable to enter STOCK RECOVERY. (or in any rare case I could, cleared data, but bootloop persists).
5. fastboot flashed recovery TWRP and CWM , cleared data, reboot, and bootloop persist.
I'm out of option. I've googled for hours and nothing seems to help. Hoping the members here could provide assistance.
I've sent the phone for a troubleshoot, and the man told me it was the motherboard that was the case.
The thing with this is that I've flashed different stock ROMS and wasn't able to boot, not one successful boot.
My theory is that I've had a corrupted NAND?
Could anyone help me?
Thanks in advance.
Click to expand...
Click to collapse
If you've flashed the phone back to stock and it still won't boot then there's probably nothing you can do. Time for a new phone.
so much like a handful of other people around here today, I soft bricked my phone yesterday morning with an ATT OTA update.
I have managed to get CWM 6.0.4.7 working, and I have tried multiple ROMS, but I can not get anything to boot past the splash screen.
please, I know I must be missing some simple thing, but I can not find out what I am doing wrong despite digging through threads all day here.
I have reset caches, data, etc, dalvik, all the recommended steps...
nothing seems to be able to boot, but I feel like I am soooo close.
thanks in advance
solution - revert, reset, reinstall
this softbrick with no potential for rollback was solved with a combination of techniques.
firstly, I used zadig and heimdall to flash a cm11 recovery into the phone.....
then, I used that recovery to install roms....
they were all locking up on boot.
I reverted back to a stock recovery for the phone 4.3 ish
then did the zadig / heimdall recovery again, installed the latest nightly of CM, and it booted!
flashed carbon kitkat, with the proper gapps, and back in action...only took a whole day!
Hi,
I flashed on my SM-T805 with wifi and LTE the new Ironrom 2.5 . On my first try something was damaged, dont know why and what. Then via Downloadmode TWPR 2.5 with autoroot. Now I wiped everything in TWRP and after that I wiped the System via advanced...
Of course I have a backup, done with TWRP 3. I restored it but it also didnt worked. After a reboot I just get the Samsung Logo with the flying Pixels. Maybe a Bootloop?
After that the wiping Session again, flashing Samsung Firmware, flashing Iron Rom 2.5.
Now I waited endless just with the Logo and after that - maybe 20 Min or longer - was the first start of Iron Rom. After a new reboot again: Just the Samsung Logo till the akku was empty....
a.) How I'm able to format delete ALL? Or what should I do?
b.) could it be that the Backup didnt restored correctly cause it was made with TWRP 3 and restored with TWRP 2.x? Dont think so...
But who knows...
c.) does anyone know a functional Cyanogen for the SM-T805?
Please give me links too (ROMs, Tools, etc) in case of an answer.
Thank you in advance, good times and peace
Follyx
Hello, I recently went to upgrade Cyanogenmod 12 to Marshmallow, everything went fine, but when I went to reboot the system I got stuck in a boot loop. Following this I wiped my system, data, and stupidly my internal storage so I lost my nandroid backup. Installed earlier firmware (Android 4.4.4), everything worked but my system didnt recognize the SIM card. Opened LG Flash tool and went back to bone stock LG, rebooted and get stuck in intermittent boot loops in varying places along the setup process and once I get to the homescreen with many versions of the Verizon LG software varying from 5.0 to 6.0. I suspect my system permissions are all f***ed but I dont know for sure as I can't get the phone far enough to enable USB debugging. Enabling it in the stock system recovery screen doesnt seem to work. I've gone through many of the threads here regarding boot loops for the G3, but havent seen any with the stock hardware.......Any thoughts on where to go from here?
Bump. Please, any help would be appreciated