Related
It is a long story, started with wanting Photoshare App. After rooting using Odin got into all sort of process stopped error. Desperate, downloaded and tried to flash CM10 using CWM. All I got was CM logo circling endlessly for 30 minutes. Pulled the plug and now, I seem to have a brick, can't even boot to recovery or download mode. When I try to boot to downlad mode, the warning screen appears for just a second and goes away. When I try recovery mode Samsumg log appears and then blank.
Is there anything I can do at this point? I appreciate any help I can get.
dileepan said:
It is a long story, started with wanting Photoshare App. After rooting using Odin got into all sort of process stopped error. Desperate, downloaded and tried to flash CM10 using CWM. All I got was CM logo circling endlessly for 30 minutes. Pulled the plug and now, I seem to have a brick, can't even boot to recovery or download mode. When I try to boot to downlad mode, the warning screen appears for just a second and goes away. When I try recovery mode Samsumg log appears and then blank.
Is there anything I can do at this point? I appreciate any help I can get.
Click to expand...
Click to collapse
Hm. if you boot up your phone are you stuck at the cm bootup? If you are im sorry bro you cant fix it for free by sending it to samsung. JTAG for 60 bucks or samsung for 60 bucks. Reason being that it shows that you have rooted and modded your device. If you were hardbricked and nothing would turn on at all you would be able to send it to samsung and get it fixed for free!
Well if it shows Download mode then it might be working, just not showing, if you see a blue ID:COM number in Odin its working. Try to flash a stock ROM in Odin while in Download mode and make sure its in PDA or you will brick. Check only Auto-Reboot and F. Reset time.
If it works congrats if not search this forum for a service called JTAG which repairs bricks.
\(._.\) To the window, to the wall.
(/._.)/
A little update ...
I was able to get to download mode after many trys and got back to stock -- unrooted. I should have stopped when I was ahead, but I was feeling invincible after this feat of reviving the phone and that was really stupid.
I wanted to root and flash CM10 nightly. I followed the instructions from http://rootzwiki.com/topic/32486-gu...m10-nightlies-without-k-exec-updated-8-18-12/. After unlocking the bootloader step, I wanted to backup the stock ROM I had on the phone -- I don't know why I wanted to do that as I had just flashed the stock and didn't have anything customized. Anyway, when I clicked backup from CWM everything died, kaput, nothing. I have been desperately holding the power button, reovery combination of buttons, download mode combination, anything I can think of, the phone is giving me the total silent treatment, which BTW I am used from a more human source.
Let me know if there is anything I can do, perhaps stand on one leg and try switching it on perhaps. http://forum.xda-developers.com/images/smilies/redface.gif
Sorry for the dumb jokes, I am a little frustrated, but I am sure I will get over it.
Thanks for those who took interest to read my question and those who cared to respond, I appreciate it....
Cheers!
are you getting any signs of life with the phone plugged in with or without the battery in?
jeeper11 said:
are you getting any signs of life with the phone plugged in with or without the battery in?
Click to expand...
Click to collapse
Absolutely nothing, not even the light that comes on when plugged in for charging.
best ...
dileepan said:
Absolutely nothing, not even the light that comes on when plugged in for charging.
best ...
Click to expand...
Click to collapse
Best advice...take out the battery, leave for 1-2 hours, insert battery, try to access download, flash stock in odin, reboot, don't flash any more Jelly Bean roms. lol
I have a samsung galaxy s3 through rogers it was rooted then factory reset and some apps were takin off that were not supposed to it worked fine right before i reset it now when i turn it on it stops at the welcome screen where you choose english or french when you choose english it says setup wizard has stopped working please tell me how to totally reset and reprogram to basic os, also when i try to download the driver to use kies for my computer it wont download...
Easiest thing to do is to reboot into download mode and install your stock ROM through Odin.
Stock Firmware can be found here.
After flashing, expect to have to boot into stock recovery to wipe data and cache. A bootloop often follows flashing stock. Don't be alarmed.
HELP!!!
S3 att stoped working all together. Won't even charge! Any suggestions?
sounds like a hard-brick. did you do anything else after the reset or did it just stop booting?
try pulling the battery for 30 minutes, plugging it into the charger for a few hours, pulling the battery again for 30 minutes and then try to start it.
xBeerdroiDx said:
sounds like a hard-brick. did you do anything else after the reset or did it just stop booting?
try pulling the battery for 30 minutes, plugging it into the charger for a few hours, pulling the battery again for 30 minutes and then try to start it.
Click to expand...
Click to collapse
Problem I think I'm having is I can't turn on debugging. So how do I get around that?
Later this night my tablet was working perfectly... I was charging the tablet that was with %1 of battery
Suddenly, the tablet turned off, and when I tryed to turn it back on, the screen started blinking, and I coulnd't even turn it on because it freezes every time i tryed to boot it...
I tryed restoring a Nandroid Backup, and it worked, for 10 seconds :victory:
The blinking started again, so I tried flashing a new ROM, maybe it could work, but no
I wiped the data, cache dalvik-cache, and formated system, but when I tried to choose the ROM, this message "Couldn't mount /sdcard" appeared
So, my last chance was to flash a firmware via Odin, but also, didn´t work
I enter into Download Mode, loaded the firmware, clicked start, and "FAIL" when writing "boot"
What I tried
_Stock firmware 4.1.2
_Stock firmware 4.2.2
_Odin 3.07
_Odin 3.09
_Windows 8
_Windows 8.1
First what was the % of the battery??? Did you say one (1) ? Try charging it all the way till it says 100%
Second do you still have custom recovery? If so go to mounts and storage and see if it says unmount in front of the SD card ... if so hit that and it should turn to unmount... then try again to find your Rom.
Hoping this helps you
Sent from my SPH-L900 using xda premium
Never flash or attempt to start a device under minimum power. That is rule number one!
Like the above answer, with the device off, plug in power and let it charge to 100%.
Start up recovery, and flash a backup ROM.
Not sure about windows 8. can't vouch for you there.
gooberdude said:
Never flash or attempt to start a device under minimum power. That is rule number one!
Like the above answer, with the device off, plug in power and let it charge to 100%.
Start up recovery, and flash a backup ROM.
Not sure about windows 8. can't vouch for you there.
Click to expand...
Click to collapse
Sorry if didn't specified better...
When it got broken the battery was %0, and I don't know if it´s getting charged because the only things I can do es enter into Download Mode, or watch that message about a bad flashing.
And about the Recovery, it got lost when the flashing went wrong. Anyway something happened with the internal storage that "wasn't mount", when in "mounts and storage" menu appeared like mounted
You think that if I charge the tablet some hours, will I be able to flash through Odin?
Or maybe any other idea?
rena14 said:
You think that if I charge the tablet some hours, will I be able to flash through Odin?
Or maybe any other idea?
Click to expand...
Click to collapse
When the tablet is off and you plug in the charger there should a battery "popping" up and should tell you how many % of charge it has, just let it charge all the way to 100%
Once it is completely charged you should be able to flash via Odin.
But the internal storage is kind of worrisome to me, when you tried to flash you did not by accident have the re-partition checked? I hope.
Anyway wait till its completely charged and try flashing a Stock Rom again.
Sent from my SPH-L900 using xda premium
Harjan112 said:
When the tablet is off and you plug in the charger there should a battery "popping" up and should tell you how many % of charge it has, just let it charge all the way to 100%
Once it is completely charged you should be able to flash via Odin.
But the internal storage is kind of worrisome to me, when you tried to flash you did not by accident have the re-partition checked? I hope.
Anyway wait till its completely charged and try flashing a Stock Rom again.
Sent from my SPH-L900 using xda premium
Click to expand...
Click to collapse
The thing is that battery popping up doesn't appear... There's just a message telling me that the flashing went wrong...
Anyway, I´m gonna rey letting it charge some houts and then try to flash again...
Thanks
rena14 said:
The thing is that battery popping up doesn't appear... There's just a message telling me that the flashing went wrong...
Click to expand...
Click to collapse
Try holding down the power button with the charger cable detached and see if that message disappears, it looks to me that the tablet is still on, if it does disappear plug your charge cable in and see what happens.
Sent from my SPH-L900 using xda premium
Any solutions?
rena14 said:
Later this night my tablet was working perfectly... I was charging the tablet that was with %1 of battery
Suddenly, the tablet turned off, and when I tryed to turn it back on, the screen started blinking, and I coulnd't even turn it on because it freezes every time i tryed to boot it...
I tryed restoring a Nandroid Backup, and it worked, for 10 seconds :victory:
The blinking started again, so I tried flashing a new ROM, maybe it could work, but no
I wiped the data, cache dalvik-cache, and formated system, but when I tried to choose the ROM, this message "Couldn't mount /sdcard" appeared
So, my last chance was to flash a firmware via Odin, but also, didn´t work
I enter into Download Mode, loaded the firmware, clicked start, and "FAIL" when writing "boot"
What I tried
_Stock firmware 4.1.2
_Stock firmware 4.2.2
_Odin 3.07
_Odin 3.09
_Windows 8
_Windows 8.1
Click to expand...
Click to collapse
Did you find a solution for this issue? I've had the same issue, I tried re flashing it, that gave me an error as well. Every subsequent attempt shows write fail.:crying:
My note 8.0 flicker
then shutdown
this only if not plugged in
I think i need new battery
---------- Post added at 10:04 AM ---------- Previous post was at 10:01 AM ----------
rena14 said:
Later this night my tablet was working perfectly... I was charging the tablet that was with %1 of battery
Suddenly, the tablet turned off, and when I tryed to turn it back on, the screen started blinking, and I coulnd't even turn it on because it freezes every time i tryed to boot it...
I tryed restoring a Nandroid Backup, and it worked, for 10 seconds :victory:
The blinking started again, so I tried flashing a new ROM, maybe it could work, but no
I wiped the data, cache dalvik-cache, and formated system, but when I tried to choose the ROM, this message "Couldn't mount /sdcard" appeared
So, my last chance was to flash a firmware via Odin, but also, didn´t work
I enter into Download Mode, loaded the firmware, clicked start, and "FAIL" when writing "boot"
What I tried
_Stock firmware 4.1.2
_Stock firmware 4.2.2
_Odin 3.07
_Odin 3.09
_Windows 8
_Windows 8.1
Click to expand...
Click to collapse
Whats new bro
Problem solved for me
rena14 said:
Later this night my tablet was working perfectly... I was charging the tablet that was with %1 of battery
Suddenly, the tablet turned off, and when I tryed to turn it back on, the screen started blinking, and I coulnd't even turn it on because it freezes every time i tryed to boot it...
I tryed restoring a Nandroid Backup, and it worked, for 10 seconds :victory:
The blinking started again, so I tried flashing a new ROM, maybe it could work, but no
I wiped the data, cache dalvik-cache, and formated system, but when I tried to choose the ROM, this message "Couldn't mount /sdcard" appeared
So, my last chance was to flash a firmware via Odin, but also, didn´t work
I enter into Download Mode, loaded the firmware, clicked start, and "FAIL" when writing "boot"
What I tried
_Stock firmware 4.1.2
_Stock firmware 4.2.2
_Odin 3.07
_Odin 3.09
_Windows 8
_Windows 8.1
Click to expand...
Click to collapse
I had the same problem. In my case, i realize that it had happend a few days after I opened the tablet (n5110). After the blinking problem, I opened again and disconneted the battery with the power cable on. Waited for a few seconds and confirm that the blinking is same side effect of the battery disconnected or with bad connection. After reconnect the battery, everything ok and charging normally again. Good luck for you all!
I have My Samsung GTN 5100 with me.Last day I plug it for charging and I went out. When i back it was 100% charged and i just leave it as it is. Suddently I started continually looping 'Samsung GTN 5100 Note 8.0'
Then I tried to hard reset by using Power Vol down and home. It doesnt Work, then try to open down load mode. It doesnt wrok. I hv tried wit Odin and Kies. the device is not recognize bt the PC. is there any software or method for gard brick
Rajeev Jayawickrama said:
I have My Samsung GTN 5100 with me.Last day I plug it for charging and I went out. When i back it was 100% charged and i just leave it as it is. Suddently I started continually looping 'Samsung GTN 5100 Note 8.0'
Then I tried to hard reset by using Power Vol down and home. It doesnt Work, then try to open down load mode. It doesnt wrok. I hv tried wit Odin and Kies. the device is not recognize bt the PC. is there any software or method for gard brick
Click to expand...
Click to collapse
i have identical problem. i disconnected also battery, but changes nothing. Any ideas?
I have similar problem and solved
I have similar problem, I left the phone charged, and suddenly the phone switched off and on again, the screen start blinking rapidly and stuck in boot screen. If I turned off and charge it, no battery signal pop, only empty battery with white circle (I thought it was stuck when the phone tried to show battery charging animation).
This is what have done:
1. Open the back case of the phone and checked the battery, and it was OK, but the phone still has same behavior after I put the battery back.
2. Tried to flash using ODIN and no luck, because the phone was not detected.
3. I suspect there was a connection problem between ODIN and the phone, so I checked the cable and PC USB driver, still no luck.
4. I am lucky have spare USB charger connector part (Female USB connector attached in the bottom of the phone with small PCB and ribbon cable). I replaced the part.
5. Try re-run ODIN and the phone was detected, I flashed it and my phone back to normal
I am not sure what cause the blinking screen, maybe there was some glitch in the software, but it is fixed after flashing the ROM using ODIN.
For undetected phone, I suggest you check the computer USB driver, USB cable and the connector. And for preemptive action, I suggest you force charging the phone, even no charging animation appear to make sure the phone is flashed with sufficient power.
Hope this helps you to solve the problem.
- Odin 3.10
- Win 10
- Android 4.2.2 original firmware
Tried removing battery and reconnecting, same as before..
What about getting a new battery?
Hi Guys,
've flash my Samsung Galaxy Note 2 N7100 to 4.4.2 KitKat it was successful, but after a few days my note 2 keeps auto shutting down randomly and sometimes I can't turn it on from sleep. I thought I've just missed something when flashing to 4.4.2 KitKat, what I did was to re-flash it and check if I've missed something but not. After I re-flash it, I've encountered this problem. I'm stuck at boot loop, I've done the Wipe process it was successful, but it didn't fix the problem, what I've noticed is when it's NOT charging or plug to PC it is stuck at boot loop, but when I plugged it to PC or charge it it continues loading the KitKat, sometimes prompting that it's not charging.
I'm wondering what could be the problem here. I've google any possible problem, I can't find any similar problem to mine. Can anyone help?
I'm still try any possible way to fix... HELP!
Dennis_Arlo said:
Hi Guys,
've flash my Samsung Galaxy Note 2 N7100 to 4.4.2 KitKat it was successful, but after a few days my note 2 keeps auto shutting down randomly and sometimes I can't turn it on from sleep. I thought I've just missed something when flashing to 4.4.2 KitKat, what I did was to re-flash it and check if I've missed something but not. After I re-flash it, I've encountered this problem. I'm stuck at boot loop, I've done the Wipe process it was successful, but it didn't fix the problem, what I've noticed is when it's NOT charging or plug to PC it is stuck at boot loop, but when I plugged it to PC or charge it it continues loading the KitKat, sometimes prompting that it's not charging.
I'm wondering what could be the problem here. I've google any possible problem, I can't find any similar problem to mine. Can anyone help?
I'm still try any possible way to fix... HELP!
Click to expand...
Click to collapse
Ive just encountered the same problem. Were u able to find a solution?
Shahin7631 said:
Ive just encountered the same problem. Were u able to find a solution?
Click to expand...
Click to collapse
I exactly encounter the same issue on my Note II. It seems that the automatic reboot (then the boot loop) when the phone is unplugged is generated with apps (or system) using internet connection or the camera.
Please help ! :crying:
Dennis_Arlo said:
Hi Guys,
've flash my Samsung Galaxy Note 2 N7100 to 4.4.2 KitKat it was successful, but after a few days my note 2 keeps auto shutting down randomly and sometimes I can't turn it on from sleep. I thought I've just missed something when flashing to 4.4.2 KitKat, what I did was to re-flash it and check if I've missed something but not. After I re-flash it, I've encountered this problem. I'm stuck at boot loop, I've done the Wipe process it was successful, but it didn't fix the problem, what I've noticed is when it's NOT charging or plug to PC it is stuck at boot loop, but when I plugged it to PC or charge it it continues loading the KitKat, sometimes prompting that it's not charging.
I'm wondering what could be the problem here. I've google any possible problem, I can't find any similar problem to mine. Can anyone help?
I'm still try any possible way to fix... HELP!
Click to expand...
Click to collapse
I had a similar problem with my note 2 N7100.
It used to reboot every 30 minutes.
The best solution was to reinstall the firmware using ODIN.
First you need to download the firmware from sammobile and put the phone in download mode and install it.
Hope this solution helps you too.
anish100 said:
I had a similar problem with my note 2 N7100.
It used to reboot every 30 minutes.
The best solution was to reinstall the firmware using ODIN.
First you need to download the firmware from sammobile and put the phone in download mode and install it.
Hope this solution helps you too.
Click to expand...
Click to collapse
Thank you anish. I already tried this solution (with stock firmware and Cyanogenmod 10.3 &11) but it didn't work for me
The phone boot only happens when I unplug the USB cable and launch an app. If I do nothing after unplugging the cable the phone don't boot immediatly.
GStriker said:
Thank you anish. I already tried this solution (with stock firmware and Cyanogenmod 10.3 &11) but it didn't work for me
The phone boot only happens when I unplug the USB cable and launch an app. If I do nothing after unplugging the cable the phone don't boot immediatly.
Click to expand...
Click to collapse
Hi guys ! I finally found a temporary work around to avoid automatic reboot. After multiple tests I noticed that the issue seems to come from CPU usage.My phone never went to deep sleep and often stayed around 1600MHz.
The work around was to go to Preferences > Performances > Processor/CPU > Strategy select "userspace" . The CPU goes down to 800MHz but I don't have any more automatic reboot when the USB cable is unplugged.
After reboot the boot loop is still there (so I need to put back in the USB cable to boot normally). I was wondering if the boot loop comes from the boot.img file...
GStriker said:
I exactly encounter the same issue on my Note II. It seems that the automatic reboot (then the boot loop) when the phone is unplugged is generated with apps (or system) using internet connection or the camera.
Please help ! :crying:
Click to expand...
Click to collapse
Ive literally tried everything .even repartioned the phone . it works fine in recovery and download mode but as soon as i want too boot to android unplugged it restarts . when plugged it has no problem
Funny thing. I have a factory Sprint Note 2 with the latest kitkat updat and I am experiencing the same problem. Phone has not been rooted or messed with. If anybody come across a solution let me know. I booted the phone and unplugged the power button to verify and it does the same thing. Only stays on when in airplane mode or charging.
One more thing. I tried somewhat to do what was posted above about performance / cpu power. I put the phone in powersave mode and checked limit cpu and is is fully operation. problem gone. If I turn power save mode off I'm back to square one.
To late. Took a picture by mistake and phone jumped into boot loop.
i have GT-N7100 and same problem phone is stuck on boot loop when unpluged
---------- Post added at 04:22 PM ---------- Previous post was at 03:24 PM ----------
i just tought maybe it needs new battery. cause before i unpluged it it showed 67% then bootlooped 2x then i pluged back in and it shows me only 5%. i think its battery cause it cant dishcharge in 1 or 2min
My initial problems were that it would drop signal and show an x with no bars intermittently. then i started having problems anytime the phone demanded use. Picture, internet, video. tried a few things listed above. Still would go into a boot loop when not plugged in. Battery would charge normally and show it percentage like normal. It would reach 100% with no difference in charge time. When battery saver is on it would not have a problem unless I use an app that demands more cpu usage, network connection, battery consumption. Put a new battery and problem is gone. some people say the battery show swelling but my battery looks identical to the new one. no swelling and it is not deformed in any way.
It also solves the problem for me ...but i dont know what to do after the restart ...have u found a permenant solution
Shahin7631 said:
It also solves the problem for me ...but i dont know what to do after the restart ...have u found a permenant solution
Click to expand...
Click to collapse
I was thinking. If you flashed with a bad battery whats there to keep it from affecting the flash / update. The stock system doesn"t allow an update unless the battery is charged. It doesn't know if the battery is faulty. Try to reflash after a new battery has been reinstalled and charged to full. It's just a thought.
dcmobiletech said:
I was thinking. If you flashed with a bad battery whats there to keep it from affecting the flash / update. The stock system doesn"t allow an update unless the battery is charged. It doesn't know if the battery is faulty. Try to reflash after a new battery has been reinstalled and charged to full. It's just a thought.
Click to expand...
Click to collapse
Ive tried already with another battery ....its a very strange situation while everything works fine in download or recovery mode when its unplugged ...i have ordered a third party battery to see if it'll make a difference or not ....i'll keep u updated tomorrow
GStriker said:
Hi guys ! I finally found a temporary work around to avoid automatic reboot. After multiple tests I noticed that the issue seems to come from CPU usage.My phone never went to deep sleep and often stayed around 1600MHz.
The work around was to go to Preferences > Performances > Processor/CPU > Strategy select "userspace" . The CPU goes down to 800MHz but I don't have any more automatic reboot when the USB cable is unplugged.
After reboot the boot loop is still there (so I need to put back in the USB cable to boot normally). I was wondering if the boot loop comes from the boot.img file...
Click to expand...
Click to collapse
Where is the Preferences section? I am unable to find that on my Note 2 settings.
Experienced the same thing and this is the first time I had this. I was playing a game after I fully charged my battery and suddenly it turns off. So I waited for it to turn on where I noticed that it keeps on turning on and off and stuck on the " Samsung Galaxy Note 2" logo screen. Then I tried several things like clearing the cache and dalvik but it just do the same thing. I re-flashed the 4.4 ROM that I was using but sadly it does the same thing. I then noticed that if I plug in the charger it works normally and does not boot loop. And as soon as I remove the charger it will keep on restarting on and off on that screen. I was thinking that it might be a hardware failure or the battery itself. So I went to recovery mode and unplugged the charger, it stays on. Went to download mode without the charger and it stays on. Freakin' weird. I am about to flash a different ROM and will wipe everything and see what happens...
Fully charged the battery to 100%, unplugged the charger and it started to boot loop again. I allowed it to boot loop once and immediately went to recovery mode and saw that my fully charged battery went down to 3%. Tried different ROMS (Omega, DN3, and Phoenix), I still have this issue. Now can use my Note2 as long as the charger is plugged in...
Change your battery and solve the problem ?
Sent from my GT-N7100 using XDA Free mobile app
I did. Case closed!
red_hanks said:
I did. Case closed!
Click to expand...
Click to collapse
is it working fine after battery change? does it still get stuck in boot loop? mobile networks?
It works perfectly !
The phone is showing black screen after i flashed exitrecovery.zip file since i got stuck into a recovery bootloop and right after when i pressed reboot button in twrp phone died. Have i got the phone hard bricked?? :crying:
What i have tried so far is pressing various keys combination and nothing is happening, tried to get into download mode but right after putting the usb cable connected with pc into phone it gives a notification sound but doesn't shows anything on phone screen :crying:
I also tried to flash the stock rom with lg flash tool 2014 with kdz file but it reaches to a point in the beginning and it gives an error message that the "phone isnt connected pull out the cable and retry" and after pressing retry few times it gets stuck at 60%
Please help, is there a way to get out of this :crying:
When something similar happened to my Galaxy S4, I charged it to 100% first. Then I tried flashing the stock image back to it twice. The first time did not seem as if it completed. Second time was the charm. I know the phones are different but the symptoms are identical.
rigerp said:
The phone is showing black screen after i flashed exitrecovery.zip file since i got stuck into a recovery bootloop and right after when i pressed reboot button in twrp phone died. Have i got the phone hard bricked?? :crying:
What i have tried so far is pressing various keys combination and nothing is happening, tried to get into download mode but right after putting the usb cable connected with pc into phone it gives a notification sound but doesn't shows anything on phone screen :crying:
I also tried to flash the stock rom with lg flash tool 2014 with kdz file but it reaches to a point in the beginning and it gives an error message that the "phone isnt connected pull out the cable and retry" and after pressing retry few times it gets stuck at 60%
Please help, is there a way to get out of this :crying:
Click to expand...
Click to collapse
jmacguire said:
When something similar happened to my Galaxy S4, I charged it to 100% first. Then I tried flashing the stock image back to it twice. The first time did not seem as if it completed. Second time was the charm. I know the phones are different but the symptoms are identical.
Click to expand...
Click to collapse
ok let me try it out, please stay in touch?