Stuck at choose network screen,not connecting to my network-my network is working on all other devices ,OUYA keeps on saying"please check your internet connection and try again"
Wifi or wired? Can you try the other way, or change locations, jacks, etc. If that doesn't work try changing the wifi network to a new broadcast SID name, maybe without security for testing.
Anything unusual about your network?
If using wireless go into settings and turn off ethernet...
First time connecting? The OUYA had wifi problems out of the box that have been...improved (not fixed), the best way to set it up is just use ethernet, after the initial updates you should be fine to use wifi
I have installed cwm recovery and is on ouya plus rom
its fault of ouya launcher,I managed to sideload nova launcher,am using nova as default launcher,now i can download from playstore:good:didnt checkout ouya store thoough
Hello everyone. I'm going to share a way for you to control your CWM install over WiFi, sort-of. Do not ask for a pure WiFi implementation, I am more interested in other projects here that may or may not happen with the release of 5.0 sources and rbox's partial unlock.
Next, here is a list of things you'll need:
A WiFi router
A laptop or WiFi device
patience
time
Now that we have all of this, you will connect your gateway into your wireless router, in order to provide an internet connection. If you do not have a way to plug in your gateway, you may want to explore using DD-WRT and the router as a client-bridge (this will connect to your home's network, then turn the router into a switch). With this completed, reboot your Fire TV to the recovery. You will see that it has an IP on your sub-net (just like your laptop and phone). This is because the router is doing all of the work and connecting the devices, much like if the WiFi inside of the Fire TV was utilized.
All you must do now is type the following:
Code:
adb connect X.X.X.X
where the X's are replaced with the IP shown on the Fire TV's screen.
Now do as you please, you have your WiFi control. If you desire to donate, do so to @rbox He was the one who allowed you to do this stuff in the first place.
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
OzzMosiz said:
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=com.amazon.storm.lightning.client.aosp&hl=de
If you are using a wifi remote control app like Wukong Romote, your phone and the AFS has to be on the same network for your phone to be able to find it.
Sent from my LGL41C using Tapatalk
I find the control can be use in this app called CetusPlay, you can find it on google play store
Use a second smartphone or tablet with firetv to reconfigure the stick to the hotel WiFi
For the "not long enough, want to read" explanation -
As the OP said, configure 1st smartphone as a WiFi hotspot with identical name and password as home WiFi.
Firetv should automatically connect you this when powered up.
Connect 2nd smartphone to this network (probably will automatically connect as it will 'see' it as its home network)
Use the firetv app on 2nd smartphone to navigate to system/settings/network (not exact steps but you should be able you find it) and reconfigure the firetv stick to connect to the guest/hotel WiFi.
Once connected turn off WiFi hotspot on 1st phone and connect it to guest/hotel WiFi.
Start firetv app, search for firetv and connect.
Discover that most content is geographically controlled and cannot be viewed and settle in for a season of Man in the High Castle.
@finkle - this was a good idea, but sadly as soon as the other wifi is selected on the fire stick it changes to the hotel wifi and opens the browser page to enter the credentials, which simultaneously disconnects the remote app! So close ;-(
That's what you want to happen.
Once the firestick is connected to the hotel Wi-Fi you connect either of the remote devices to the hotel Wi-Fi and you're good to go - the firestick and device will both be on the same network so they can chat..
The hotel Wi-Fi I used this on only required confirmation that you wanted to connect and accept their usage terms, which the firestick coped with fine.
Honestly, it worked in real life!
Hi,
I tried the above steps, but when I then connect my mobile to the hotel network, it then cannot find the firestick. I have the firestick stuck on the hotel pop up asking for the password, but can not navigate to enter the password in. Help?
Thanks
---------- Post added at 07:00 PM ---------- Previous post was at 06:54 PM ----------
Hi,
I tried the above steps, but when I then connect my mobile to the hotel network, it then cannot find the firestick. I have the firestick stuck on the hotel pop up asking for the password, but can not navigate to enter the password in. Help?
Thanks
finkle said:
That's what you want to happen.
Once the firestick is connected to the hotel Wi-Fi you connect either of the remote devices to the hotel Wi-Fi and you're good to go - the firestick and device will both be on the same network so they can chat..
The hotel Wi-Fi I used this on only required confirmation that you wanted to connect and accept their usage terms, which the firestick coped with fine.
Honestly, it worked in real life!
Click to expand...
Click to collapse
Thanks To User FINGLE......
Thanks ,..I tried it.. I lost my remote to my firestick... I got the app on my phone...for remote... Firestick was still on previous network....and since we got new internet..service provider... The network was diffrent,....so we changed hotspot on phone, ( to the previous netwrk we had...and I got a diffrent phone...and with the second phone,, I was able to conect with the phone ap remote...[theseconv
QUOTE=finkle;69046260]Use
HTML:
a second smartphone or tablet with firetv to reconfigure the stick to the hotel WiFi
For the "not long enough, want to read" explanation -
As the OP said, configure 1st smartphone as a WiFi hotspot with identical name and password as home WiFi.
Firetv should automatically connect you this when powered up.
Connect 2nd smartphone to this network (probably will automatically connect as it will 'see' it as its home network)
Use the firetv app on 2nd smartphone to navigate to system/settings/network (not exact steps but you should be able you find it) and reconfigure the firetv stick to connect to the guest/hotel WiFi.
Once connected turn off WiFi hotspot on 1st phone and connect it to guest/hotel WiFi.
Start firetv app, search for firetv and connect.
Discover that most content is geographically controlled and cannot be viewed and settle in for a season of Man in the High Castle.[/QUOTE]
ok i have done everything exactly as you have said, but unfortunately my fire tv is not automatically connecting....Any thoughts on why? I know i reconfigured the hot spot correctly because i disconnected a 2nd smart phone from the current wifi and it automatically found our home network and connected...
What i typically do is connect my FireTV stick to the USB port on my computer, i can then manually send keyevents via ADB to connect the device through the hotel portals, yes it is tedious but once you get it connected you should be able to connect to it via Fire TV remote App on your phone. you can then plug it back into the wall and when it reboots it should auto connect to wifi this time.
P.S. this will only work if you have already previously enabled developer mode and allow adb connection on your fireTV stick.
Oh clever people, I hope you can help? I am absolutely not techy-minded, I wish I was..
I've read through this thread, and I fear there is no help for me..
I was bought a firestick by a well-meaning friend, who set it up for me... About 18 months ago. I have since moved house, and the move has meant the remote is misplaced.. So I downloaded an app that I can use as a remote. However the firestick is still linked to the old wifi, of which I have no idea what the username or password was....
So am I buggered? A useless firestick?
Please advise!
LinzAM said:
Oh clever people, I hope you can help? I am absolutely not techy-minded, I wish I was..
I've read through this thread, and I fear there is no help for me..
I was bought a firestick by a well-meaning friend, who set it up for me... About 18 months ago. I have since moved house, and the move has meant the remote is misplaced.. So I downloaded an app that I can use as a remote. However the firestick is still linked to the old wifi, of which I have no idea what the username or password was....
So am I buggered? A useless firestick?
Please advise!
Click to expand...
Click to collapse
I found this answer on the Amazon help page ( https://www.amazon.com/ask/questions/Tx3ERA8C5GDSLWS?_encoding=UTF8&sort=helpful ) :
All tvs have a cec option under settings. Google search cec settings and it'll help ya. It lets you control hdmi plug ins with the regular tv remote. Tried it on one of my tvs and wouldn't work. Tried it on another tv in the house witch is different brand and it worked. I was able to set the wifi back up and then was able to use the fire stick remote app on my phone. Good luck
Someone confirmed that it worked for them. if not then you can order a new remote fairly cheaply: https://www.amazon.com/gp/product/B00LORGAG6/ref=ask_ql_qh_dp_hza
Problem Solved
Hold down the home button on your Amazon firestick remote until you get a popup on your tv screen that the remote is connected. This will take 5-10 seconds. No internet necessary. Cheers!!
Thank You!
This CEC on my visio worked perfectly. we haven't been able to use one of our firesticks for quite a while now. thank you!! and no... holding down the select button on a diff remote does not work..
Enable the CEC Setting on your TV
OzzMosiz said:
Ok, I am in a hotel and have tried to plug-in my Fire TV Stick, but it doesn't find my home wifi - no surprise - darn! I've forgot the standard Remote Control!!!! ARGHHH
So I configure my phone as a wifi hot spot and name it as my home wifi (with the same password) - voila! I can connect with the Fire TV app for Android but as soon as I go to reconfigure the wifi to use the hotels wifi it disconnects and I can no longer access it at all from the Android app.
Now, is there a way to reconfigure the wifi-settings manually either by plugging it into a computer via USB or some other app that will emulate the stock remote that comes with the Fire TV?
Click to expand...
Click to collapse
----
Go into the settings on your tv and enable CEC. I have a Vizio and it worked for me.
In your search engine type: How to Enable HDMI-CEC on Your TV, and Why You Should then click on the HowtoGeek link
In case anyone runs in to this in the future (including myself).
If your stick is rooted then you can manually configure the WiFi over ADB/USB in the file /data/misc/wifi/wpa_supplicant.conf
My situation is that one day i switched my tv input from blue ray player to fire tv stick as ive done for a long time, but this time when itd boot up it would hold on the home screen and the 3 dots, and then network connection lost. But nothing has changed with my wifi, all my other devices still connect to wifi just fine. And i dont have the remote and have been using my phone to navigate my fire tv stick. Any advice?
Now its bootlooping after it shows network connection lost for about 1min then reboots.
Could provide steps as to how to reconfigure Wi-Fi setting in the Fire Stick via ADB?
Howdy,
I've seen other threads about this but I haven't been able to get them to work. I'm out of town right now and I brought my Fire TV Stick with me but forgot the remote. I have no way to control it to connect it to the wifi at where I am right now so I can't use the normal Fire TV App to control it.
I tried setting my phone and my laptop into WAP mode with the same SSID and password I use at home but the Stick isn't seeing it to connect. I don't know if there's anything else I can try. Does the normal remote talk to the Stick via bluetooth that I can do something that way? Is there any other way I can connect to the Stick via my phone or a laptop in order to get it online with the current SSID & password?
I do see an SSID called DIRECT_OP_My Fire Stick but I don't know if I can connect to that to do anything useful.
Thanks for any help.
I have an original AFTV gen 1 running the latest (end of Aug) software.
I have it connected via an ethernet cable, but need to change the DNS sever settings.
If I go under Settings/Network it shows the ethernet connection and it lets me go through the settings and I can enter the changes (new DNS settings) that I want. At the end it lets you press the "play" button to save and it looks like it works.
But when you go back to look at the connection the changes are not saved or applied - I have tried this repeated times - but no luck.
There is an option to 'forget' the connection. However it doesnt appear you can remove the ethernet connection.
I disconnected the ethernet cable and the device switches to wifi - I managed to set up a wifi connection and specify my custom DNS entries, but would really prefer it to be using the ethernet connection because its usually more responsive.
I had thought about doing a full factory restore, but dont really want to have to set all my apps up again - and there is no guarantee that it will let me change the DNS settings anyway.
Anyone got any good ideas or suggestions?