Hi
I've finished fully automatic sytem protection disable tool for stock kernel.
Code:
It wouldn't be possible without xda users, xda community, especially:
flar2 - for original kernel module,
which was made for HTC One M8
Ladies & Gentlemen...
DSWP [disable system write protection] !
[What is this?]
Its automatic tool which will install kernel module,
which I ported to get work with Htc Desire Eye,
to get system fully writable, without any problems,
such as not-deleting bloatware - after reboot comes back,
reboots on modifying /system partition, etc etc.
Install process includes:
fw version check,
install kernel module to /system partiion,
make kernel module autobooting,
check if module is active after reboot.
..all this with just one click
[Requirements]:
- root,
- busybox
- adb,
- stock kernel,
For now 100% compatible are:
* LATEST LOLLIPOP 2.19.xxx.xx 5.0.2!
* EU 1.17.401.9!
* US AT&T 1.15.502.7!
* THREE 1.17.771.5
* 1.17.166.9
* and...?
just check if it works on other fw versions!
if it would not work with your ver - i can make it compatible
[Changelog]:
Code:
[20.04.2015] v2.1:
- changed tool name to be more unique/recognizable :D,
- added busybox installer,
- recompiled init.d apk - now its permanently turned on!
- now you can make wipe/factory reset and you will still have mod!
[18.04.2015] v2.0:
- added compatibility for newest LOLLIPOP firmwares,
using now other autorun method for inserting module,
because of install-recovery.sh not working in lollipop :)
[18.02.2015] v1.2:
- confirmed/added compatibility with 1.17.166.9
[20.01.2015] v1.1:
- confirmed/added compatiblity with THREE 1.17.771.5
[09.02.2014] v1.0:
- initial version.
[Screenshots:]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Download]:
Attached to this thread.
[Donate]:
Keep this project alive - don't forget to donate!
br
condi
current_version=2.1
Thank you this worked perfectly on my att desire eye
I just keep getting the... Waiting for device message.
Baldilocks said:
I just keep getting the... Waiting for device message.
Click to expand...
Click to collapse
do you have USB debugging on?
ccb101 said:
do you have USB debugging on?
Click to expand...
Click to collapse
Yes, USB debugging is on. Do I need to have the file unzipped in a certain directory on my computer? Right now I have it in my Android Fastboot folder.
Baldilocks said:
I just keep getting the... Waiting for device message.
Click to expand...
Click to collapse
Baldilocks said:
Yes, USB debugging is on. Do I need to have the file unzipped in a certain directory on my computer? Right now I have it in my Android Fastboot folder.
Click to expand...
Click to collapse
shouldnt need to i ran mine from the desktop and all the adb files required are packaged up in the zip...
ccb101 said:
shouldnt need to i ran mine from the desktop and all the adb files required are packaged up in the zip...
Click to expand...
Click to collapse
Yeah, even when I click on ADB shell on the app it says Device Not Found.
***EDIT****
Rebooted my computer. Worked that time.
---------- Post added at 07:08 PM ---------- Previous post was at 06:13 PM ----------
Actually it's not working. Maybe my firmware is too new??
This is the message I get.
1.17.401.9
[*] Pushing kernel module...
cannot stat 'files\1.15.502.5_wp_mod.ko': No such file or directory
[*] Mounting /system as RW, and injecting kernel module...
[*] Done!
[*] Reboot and check...
Baldilocks said:
Yeah, even when I click on ADB shell on the app it says Device Not Found.
***EDIT****
Rebooted my computer. Worked that time.
---------- Post added at 07:08 PM ---------- Previous post was at 06:13 PM ----------
Actually it's not working. Maybe my firmware is too new??
This is the message I get.
1.17.401.9
[*] Pushing kernel module...
cannot stat 'files\1.15.502.5_wp_mod.ko': No such file or directory
[*] Mounting /system as RW, and injecting kernel module...
[*] Done!
[*] Reboot and check...
Click to expand...
Click to collapse
Extract zip archive, all the files, to root of C:\ drive (C:\EyE [...]\),
and run .bat from this directory.
DO NOT run .bat file directly from archive.
Not Working
This is not working in build 1.17.707.9.
Shameera_N said:
This is not working in build 1.17.707.9.
Click to expand...
Click to collapse
No problem. Pull /system/lib/modules/texfat.ko file and attach it.
I will make it compatible with your firmware.
br
condi
condi said:
No problem. Pull /system/lib/modules/texfat.ko file and attach it.
I will make it compatible with your firmware.
br
condi
Click to expand...
Click to collapse
I have done that...Thank you
condi said:
No problem. Pull /system/lib/modules/texfat.ko file and attach it.
I will make it compatible with your firmware.
br
condi
Click to expand...
Click to collapse
I have flashed SkyDragon EYE ROM And Kernal
Thank you
@OP
It worked as expected, thank you very much.
Do you have a bitcoin address, I would like to pay you a beer
Tealc said:
@OP
It worked as expected, thank you very much.
Do you have a bitcoin address, I would like to pay you a beer
Click to expand...
Click to collapse
I'm glad it worked well Unfortunatelly I've never used bitcoin.
But thanks anyway!
br
condi
this is my file can you update your app because it doesn't work with my phone
thanks
Hi and thanks.
This is the file for firmware 1.17.166.9, if you can make it compatible with this version...
Thanks in advance
nothing men????
blackjackalmiaobo said:
nothing men????
Click to expand...
Click to collapse
recently i've been busy. post me fw version which is your file from.
br
condi
condi said:
recently i've been busy. post me fw version which is your file from.
br
condi
Click to expand...
Click to collapse
Cid htc_031 italy no brand
Software 1.17.401.9
Kernel 3.4.0
Htc sdk api: 6.25
Build: 1.17.401.9 cl402884 release-keys
I tried with your 1.1 tool but nothing
elric1427 said:
Hi and thanks.
This is the file for firmware 1.17.166.9, if you can make it compatible with this version...
Thanks in advance
Click to expand...
Click to collapse
Try v1.2.
blackjackalmiaobo said:
Cid htc_031 italy no brand
Software 1.17.401.9
Kernel 3.4.0
Htc sdk api: 6.25
Build: 1.17.401.9 cl402884 release-keys
I tried with your 1.1 tool but nothing
Click to expand...
Click to collapse
1.17.401.9 is supported since v1.0 version.
Check with adb:
Code:
lsmod | grep /system/lib/modules/wp_mod
ls -l /system/lib/modules/wp_mod
and post it here
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirements:
Flashtool 0.9.13 by @Androxyde
XZDualRecovery 2.7.76 BETA or newer.
Current rooted FW version: 10.4.B.0.569, Maybe others too, let me know!.
Special features:
SuperSU integrated in system, FULL ROOT!
XZDualRecovery 2.7.86 BETA (CWM & PhilZ Touch & TWRP) pre-installed;
init.d support (read how to enable)
For both locked and unlocked bootloaders!
In the following guide I suggest you use an external SDCard but that's just good practice, you can use your internal storage or even an USB OTG storage device in TWRP if you like to install, that's no problem!... If you are modding and the likes, best is to have an external sdcard, just for safeties sake.
If you are unable to download torrent files directly, have http://zbigz.com/ do it for you!
How to update to 10.4.1.B.0.101:
Files:
For C6503: Download C6503_10.4.1.B.0.101.flashable.zip (Bittorrent: 823MB) and C6503_10.4.1.B.0.101_Stripped.ftf (17MB)
Save them somewhere you remember;
Put 'C65XX_10.4.1.B.0.101.flashable.zip' on (the external) SDcard1;
Put 'C65XX_10.4.1.B.0.101_Stripped.ftf' inside the Flashtool/firmwares folder;
Create a backup of your phone in TWRP and don't forget to backup the contents of 'SDCard' (the internal storage!);
Flash 'C65XX_10.4.1.B.0.101.flashable.zip' in TWRP;
NOTE: do not reboot but go back to the main menu, then go to reboot->power off;
Flash everything in 'C65XX_10.4.1.B.0.101_Stripped.ftf' using flashtool;
Reboot to system.
The first boot will be slow and after some time at the boot animation you will see Android start optimizing the apps on your phone.
Enjoy! :laugh:
Known XZDualRecovery Issues:
Busybox Updater/Installer: If you have XZDualRecovery installed, un-install any Busybox updating app/tool as most if not all of them will install a version of busybox which does not support the lzma compression applets XZDualRecovery depends on. The version installed together with XZDualRecovery is very stable and I have yet to hear anyone complain about it's stability.
How to report errors:
Please, before shouting out "It doesn't work!!1!" or "I lost root!" or even "My phone reboots when remounting /system RW!!" try the following:
Restore any JB 4.2.2 FTF using any means you are familiar with so you can try again.
Root it using any means you are familiar with.
Install XZDualRecovery;
Update to 10.4.B.0.569;
Then try to update again using TWRP.
If it still fails something from there on: LOGS!!.
NOTE: The important ones can be found in /cache/recovery and in /sdcard1/XZDualRecovery, pack them up and send them to me or attach them to your bug report.
Thank you
Tips and Tricks
Easy switching between locked and unlocked bootloader states!
NOTE: USE TWRP ONLY for this guide.
NOTE 2: You NEED to have XZDualRecovery 2.7.43 or higher to make this work.
Create a backup, including the Trim Area (TA!)
Unlock your bootloader
Restore backup without TA
Create a new backup of your UNLOCKED TA
Restore the previous TA backup to relock your phone.
Done :good:
Now you can switch between locked and unlocked bootloaders quick and painless: no more system wipes and you can basically do whatever you want
How to enable init.d support:
Open a filemanager app and navigate to the location where the XZDualRecovery folder is located and go in to it. Open XZDR.prop as a text file and set dr.initd.active to true.
NOTE: For this guide ROM it means the init.d script called 99SuperSUDaemon will kick in to action, so it's best to disable (by setting chmod 644) /system/etc/install-recovery.sh for the time being or to clear it's contents.
Done
And i'll have this one too, just to be sure.
sir how to update if i came from fw 569 with root,xzdr and deodex(LB)?just update it?no need to wipe?
Kylez said:
sir how to update if i came from fw 569 with root,xzdr and deodex(LB)?just update it?no need to wipe?
Click to expand...
Click to collapse
When you come from any deodexed rom you will have to at least wipe dalvik-cache
will xposed framework still able to run in this fw 101?
Possible for C6502?
Sorry, is it possible to flash this new FW to C6502?
cheetahlm said:
Sorry, is it possible to flash this new FW to C6502?
Click to expand...
Click to collapse
yes
renzzoman said:
will xposed framework still able to run in this fw 101?
Click to expand...
Click to collapse
Just give it a try, I don't use Xposed, so I can't tell you.
demonicjas said:
yes
Click to expand...
Click to collapse
Sorry, I success flashed the the 101.flashable to my C6502 but I cannot flash the stripped.ftf via flashtool. There was a message "ERROR - Error flashing. Aborted". How to solve this problem?
cheetahlm said:
Sorry, I success flashed the the 101.flashable to my C6502 but I cannot flash the stripped.ftf via flashtool. There was a message "ERROR - Error flashing. Aborted". How to solve this problem?
Click to expand...
Click to collapse
What version of flashtool are you using?
cheetahlm said:
Sorry, I success flashed the the 101.flashable to my C6502 but I cannot flash the stripped.ftf via flashtool. There was a message "ERROR - Error flashing. Aborted". How to solve this problem?
Click to expand...
Click to collapse
Maybe you need to install flashmode driver for your phone.
---------- Post added at 04:52 PM ---------- Previous post was at 04:46 PM ----------
renzzoman said:
will xposed framework still able to run in this fw 101?
Click to expand...
Click to collapse
I can confirm that Xposed Framwork (Xperia Test) won't work with this fw 101. After Install/Update and reboot, you got bootloop. Must go into TWRP to install Xposed-disabler.
I'm using xposed v2.4.1 with .101 work just fine.
Sent from my C6503 using Tapatalk
demonicjas said:
yes
Click to expand...
Click to collapse
[NUT] said:
What version of flashtool are you using?
Click to expand...
Click to collapse
Edit : Sorry, already solved the problem. Thanks.
cheetahlm said:
Edit : Sorry, already solved the problem. Thanks.
Click to expand...
Click to collapse
How did you fix it?
[NUT] said:
How did you fix it?
Click to expand...
Click to collapse
I am not sure... Just only restart the flashtool. Also after flashing the ROM dan Off (not reboot), I just On my C6502, complete the setup, and reconnect to the flashtool in flashmode. That's all friend.
Works fine, thanks NUT!
@[NUT]
Once again a beautiful and very well done job buddy. Everything working perfectly here, so far, so good.
Thanks for your continued support on out Xperias.
Best regards
already flash this 101 fw and Xposed Framework also work perfect. But it seem there is still a bug on the power button, just like in 569
I have a rooted (locked BL) 10.3.1.A.67.
Someone have any idea if this will work as well?
Q&A for [TOOL] EyE [disable write protection] v1.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [TOOL] EyE [disable write protection] v1.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hi
I have a desire Eye running with Three. Will this zip work with my rom and how do I use it.
My OS is 1.17.771.5, I hope this information helps you to help me.
Thanks
condi said:
Hi
I've finished fully automatic sytem protection disable tool for stock kernel.
Code:
It wouldn't be possible without xda users, xda community, especially:
flar2 - for original kernel module,
which was made for HTC One M8
Ladies & Gentlemen...
EyE [disable write protection] !
[What is this?]
Its automatic tool which will install kernel module,
which I ported to get work with Htc Desire Eye,
to get system fully writable, without any problems,
such as not-deleting bloatware - after reboot comes back,
reboots on modifying /system partition, etc etc.
Install process includes:
fw version check,
install kernel module to /system partiion,
make kernel module autobooting,
check if module is active after reboot.
..all this with just one click
[Requirements]:
- root,
- adb,
- stock kernel,
For now 100% compatible are:
* latest EU 1.17.401.9!
* latest US AT&T 1.15.502.7!
* and...?
just check if it works on other fw versions!
if it would not work with your ver - i can make it compatible
[Changelog]:
Code:
[09.02.2014] v1.0:
- initial version.
[Screenshots:]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[Download]:
Attached to this thread.
[Donate]:
Keep this project alive - don't forget to donate!
br
condi
current_version=1.0
Click to expand...
Click to collapse
Gromit31 said:
Hi
I have a desire Eye running with Three. Will this zip work with my rom and how do I use it.
My OS is 1.17.771.5, I hope this information helps you to help me.
Thanks
Click to expand...
Click to collapse
Use this command with adb shell:
Code:
adb pull /system/lib/modules/texfat.ko
and attach pulled file here.
I will make it compatible with your version.
br
condi
Hi,
I have seen your reply, but I don't understand after pulling the file.
What do I attach?
QUOTE=condi;58106359]Use this command with adb shell:
Code:
adb pull /system/lib/modules/texfat.ko
and attach pulled file here.
I will make it compatible with your version.
br
condi[/QUOTE]
Gromit31 said:
Hi,
I have seen your reply, but I don't understand after pulling the file.
What do I attach?
QUOTE=condi;58106359]Use this command with adb shell:
Code:
adb pull /system/lib/modules/texfat.ko
and attach pulled file here.
I will make it compatible with your version.
br
condi
Click to expand...
Click to collapse
[/QUOTE]
upload it somewhere and post link, or attach it here to your reply.
Hi, ive finally figured ot what you required, here is the file that you wanted.
Hi,
I have finally figured out what you wanted. Ive zipped the file for you, Thanks
Gromit31 said:
Hi,
I have seen your reply, but I don't understand after pulling the file.
What do I attach?
QUOTE=condi;58106359]Use this command with adb shell:
Code:
adb pull /system/lib/modules/texfat.ko
and attach pulled file here.
I will make it compatible with your version.
br
condi
Click to expand...
Click to collapse
[/QUOTE]
Gromit31 said:
Hi, ive finally figured ot what you required, here is the file that you wanted.
Hi,
I have finally figured out what you wanted. Ive zipped the file for you, Thanks
Click to expand...
Click to collapse
Thanks. Try v1.1 and post results
condi said:
Thanks. Try v1.1 and post results
Click to expand...
Click to collapse
I've tried the file but it does not work. The attached file shows what the file says
[*]**************************************************************[*]
[*]**************************************************************[*]
[*] EyE [disable write protection] by Condi [*]
[*]**************************************************************[*]
[*] by Konrad Plaszczykowski (@condi) [email protected] [*]
[*] 'buy me a beer' - paypal: [email protected] [*]
[*]**************************************************************[*]
[*] info, updates: [*]
[*] http://forum.xda-developers.com/showthread.php?t=2966850 [*]
[*]**************************************************************[*]
[*]**************************************************************[*]
[*] What does the tool? [*]
[*]**************************************************************[*]
[*] * it will AUTOMATICALLY install ported kernel module [*]
[*] for HTC DESIRE EYE which disables system write protection [*]
[*]**************************************************************[*]
[*] thanks goes to flar2 for original kernel module made for M8! [*]
[*]**************************************************************[*]
[*]**************************************************************[*]
**** MAIN MENU ****
'findstr' is not recognized as an internal or external command,
operable program or batch file.
0 Want to give support?
Donation link.
Please make a selection or hit ENTER to exit:
Do you know what I have to do now?
Gromit31 said:
'findstr' is not recognized as an internal or external command,
operable program or batch file.
Do you know what I have to do now?
Click to expand...
Click to collapse
Try to run .bat as administrator.
Or try one of solutions from here.
br
condi
NO ROM
What should i do if i accidentally wiped the rom on is and only have bootloader with twrp?!
Hi and thanks.
This is the file for firmware 1.17.707.9, if you can make it compatible with this version...
need comppatibility for Software number: 1.17.707.9
Thanks for a great work you have done but if possible pplease make your software compatible to Software number:1.17.707.9
Make it compatible with Software 1.17.707.9
I have attached the file
little support from u sir
Sir condi i m trying to make a fb group for desire eye users....if u could support me please like the group and help the users....if u can sir its an humble request....i have created this group HTC DESIRE EYE....disscussion and help...
couldn't done anything with 1.17.707.9 firmware
i've tried all the way with 1.17.707.9 firmware but seem it's not work, please make it work, i don't want to install MOD ROM, not now yet.
Thanks
couldn't done anything with 1.17.707.9 firmware
just another screenshot i miss to post, it say that work but actually it's not
Hello
It does not work on firmware 2.19.401.1.
Can you help?
pkzr said:
just another screenshot i miss to post, it say that work but actually it's not
Click to expand...
Click to collapse
Extract .7zip archive in root of your C:\ drive, like C:\EyE[disable.write.protection] v2.0\... and your problem will be gone.
solovieff said:
Hello
It does not work on firmware 2.19.401.1.
Can you help?
Click to expand...
Click to collapse
Done check v2.0!
If someone thinks this tool is to gain s-off,it's not for that, this is just to disable software write protection whereas s-off is hardware write protection.
Sent from my HTC Desire EYE using XDA Free mobile app
pkzr said:
just another screenshot i miss to post, it say that work but actually it's not
Click to expand...
Click to collapse
Just use latest version, it should work without problems.
govardha[email protected] said:
If someone thinks this tool is to gain s-off,it's not for that
Click to expand...
Click to collapse
as far as tool is concerned - did I ever mention about s-off?
For D802 Only
I have modified One Root Script ROOT KitKat / Lollipop firmware that for One Click ROOT+TWRP D802 Support firmware 30a/30d.
It can be use in other firmware version of D802
Download Link:
LGG2-D802-OneClickRootRecoveryV1.1.zip
http://bit.ly/1Ij1soU
If you like my work, want to support development and have few coins spare .You can Press button DONATE TO ME
How to install
Backup Data on SDCARD Before doing everything
AFTER SCRIPT FINISHED IT WILL BE REBOOT TO RECOVERY AUTOMATICLY
1. Make sure you are enable USB Debuging Mode . See this Method > Enable Debugging Mode
2. Plug G2 into computer
3. Run OneClick_ROOT_RECOVERY.bat
4. Enjoy ROOT+TWRP on Lollipop Firmware
Normally If doesn't work for people please checking port that connecting between device and computer or checking LG driver and Re-run script again or use Manual method
What does the automate script do ?
(For people can't use automate script we have to use manually ROOT+TWRP)
Make sure you are enable USB Debuging Mode . See this Method > Enable Debugging Mode
1. Pushing all stuff files
Run file
Command Prompt.bat
Click to expand...
Click to collapse
It will be show command DOS windows
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>
Click to expand...
Click to collapse
Using command as below to push files to device
adb.exe push busybox /data/local/tmp/ && adb.exe push lg_root.sh /data/local/tmp/ && adb.exe push UPDATE-SuperSU-v2.46.zip /data/local/tmp/
adb.exe push aboot.img /data/local/tmp/aboot.img
adb.exe push laf.img /data/local/tmp/laf.img
adb.exe push boot.img /data/local/tmp/boot.img
adb.exe push recovery.img /data/local/tmp/recovery.img
Click to expand...
Click to collapse
2. Reboot to Download mode
3. When enter to Download mode successfully.We need to send command to connect device with computer
Send_Command.exe \\.\COM_PATH
Click to expand...
Click to collapse
COM_PATH . we can find with ports.bat command
Ex.
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>ports.bat
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>reg query HKLM\hardware\devicemap\SERIALCOMM
HKEY_LOCAL_MACHINE\hardware\devicemap\SERIALCOMM
\Device\LGANDNETMDM0 REG_SZ COM3
\Device\LGANDNETDIAG1 REG_SZ COM4
Click to expand...
Click to collapse
A command that send to device when connecting to computer with Download Mode is
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>Send_Command.exe \\.\COM4
Click to expand...
Click to collapse
4. When we see this prompt
C:\Users\M\Desktop\cc\LG Root Script\LGG2-D80230a-OneClickRootRecovery>Send_Command.exe \\.\COM4
Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE
#
Click to expand...
Click to collapse
Try to use this command to ROOT+TWRP
# sh /data/local/tmp/lg_root.sh dummy 1 /data/local/tmp/UPDATE-SuperSU-v2.46.zip /data/local/tmp/busybox
Click to expand...
Click to collapse
5. When we see this message
ui_print - Disabling OTA survival
ui_print - Removing old files
ui_print - Placing files
ui_print - Post-installation script
ui_print - Unmounting /system and /data
ui_print - Done !
Please press Ctrl+C, and then type N and ENTER to reboot.
#
Click to expand...
Click to collapse
Try to use LEAVE command to restart device.
#LEAVE
Click to expand...
Click to collapse
6. Enjoy ROOT+TWRP
ขอบคุณครับ
For. any question that want to ask me in private Please Leave a question in facebook group
https://www.facebook.com/groups/1420724551528661/
......... DON'T INBOX TO ME .........
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Original Script
[Guide] Root LG firmwares (KitKat / Lollipop) - One click script by @avicohh
Ok
Tested on 32g Spain Vodafone 30d Rom and works like a charm, thanks
Led Zeppelin said:
Tested on 32g Spain Vodafone 30d Rom and works like a charm, thanks
Click to expand...
Click to collapse
I will be update my script for One Click ROO+TWRP.
That would be awesome
would be awesome!!
somboons said:
I will be update my script for One Click ROO+TWRP.
Click to expand...
Click to collapse
waiting just for that.. thanks :fingers-crossed::highfive::victory:
OMERZEN said:
waiting just for that.. thanks :fingers-crossed::highfive::victory:
Click to expand...
Click to collapse
Link online.
Feedback to me.
What khappens now to ur flashable rooted v30a and v30d
legola said:
What khappens now to ur flashable rooted v30a and v30d
Click to expand...
Click to collapse
Bump stock kernel is different .I want to people use compatible kernel.
somboons said:
Feedback to me.
Click to expand...
Click to collapse
This downgrade laf and aboot to v20?
4Freedom said:
This downgrade laf and aboot to v20?
Click to expand...
Click to collapse
this is a concept.
Great job man! Root & Recovery on Lollipop with LG G2 D802 is easy to do now!
somboons said:
this is a concept.
Click to expand...
Click to collapse
Okay, so now we have kitkat bootloader and kitkat "downlaod mode" on lollipop.
Between, about recovery, MUST we use only bumped version?
And every rom is compatible now?
4Freedom said:
Okay, so now we have kitkat bootloader and kitkat "downlaod mode" on lollipop.
Between, about recovery, MUST we use only bumped version?
And every rom is compatible now?
Click to expand...
Click to collapse
I answered you on all this points: http://forum.xda-developers.com/showpost.php?p=59882657&postcount=2
again: kk bootloader=> only bumped recovery/kernel
only rom with bumped kernel work on KK bootloader
6ril1 said:
only rom with bumped kernel work on KK bootloader
Click to expand...
Click to collapse
How can i understand if a rom has a bumped kernel?
Like official cm12?
And thanks for everything
i have a problem it say Couldn't open the port \\:\ COM3 after the phone enter in download mode
remio33 said:
i have a problem it say Couldn't open the port \\:\ COM3 after the phone enter in download mode
Click to expand...
Click to collapse
Screen shot please
I'm stuck at :
special command : ENTER , LEAVE
#
I did the root script once ,but wanted recovery ... maybe the other root script from avicohh is interfering ?
How to uninstall the supersu completely ,because it worked with the avicohh script, but i wanted recovery too so trying to install your script now ?
Kuoi said:
I'm stuck at :
special command : ENTER , LEAVE
#
I did the root script once ,but wanted recovery ... maybe the other root script from avicohh is interfering ?
How to uninstall the supersu completely ,because it worked with the avicohh script, but i wanted recovery too so trying to install your script now ?
Click to expand...
Click to collapse
Can you copy of log that show on command dos to me?
This script working very well for me.
somboons said:
Can you copy of log that show on command dos to me?
This script working very well for me.
Click to expand...
Click to collapse
Trying the avihocc script now ,but as expected ... same , stuck on #
I think the first install of supersu with avihocc script interfered with yours , so now i think i have to do the installation of the rom again to test if it was
Hi all ,
I want to share script for bump kernel.I have tested with D80230a/30d is working.
the original script from LG G3 thread [GUIDE][ROOT][BUMP][TWRP] Imageprep: Auto-script to Add Bump+TWRP for Rooted LG G3.The original script for install TWRP+Bump kernel for LG G3 .I modified the script for bump only
In bump.zip contain
- boot_bump
- boot_original
- tmp
- bump.sh
Instruction
1. Extract boot.bin from kdz firmware
2. Unzip bump.zip to bump folder
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Put boot.bin into boot_original
4. copy bump folder to /sdcard/bump
5. Install Terminal Emulator app from play store
6. Open Terminal Emulator then use a command
$ su
# cd /sdcard/bump
# chmod 750 bump.sh
# sh bump.sh
Click to expand...
Click to collapse
PS.
- $,# is a command prompt
- After $,# is a command
After script have done,You can see bump kernel at
/sdcard/bump/boot_bump/lollipop-bumped-boot.img
All credit
@topet2k12001
http://forum.xda-developers.com/lg-g3/general/guide-update-to-lollipop-root-bumpd-twrp-t3048845
@Skin1980
http://forum.xda-developers.com/lg-g3/orig-development/fix-sharpening-mod-script-1-0-beta-t2957648
Thank you
All credits for @Skin1980 http://forum.xda-developers.com/showthread.php?t=2957648 and his live bump script
6ril1 said:
All credits for Skin1980 http://forum.xda-developers.com/showthread.php?t=2957648 and his live bump script
Click to expand...
Click to collapse
OK! ,Thank you.
Nice!
Happy modding!
6ril1 said:
All credits for @Skin1980 http://forum.xda-developers.com/showthread.php?t=2957648 and his live bump script
Click to expand...
Click to collapse
somboons said:
OK! ,Thank you.
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Yup, @Skin1980 is the original creator of "live bump + Sharpening Mod". Used with his permission and duly credited in my thread as well.
Works great!!! Tested on boot.img extracted from 39a kdz. Bumped good.
When you gonna make this Windows based????
MicroMod777 said:
Works great!!! Tested on boot.img extracted from 39a kdz. Bumped good.
When you gonna make this Windows based????
Click to expand...
Click to collapse
Next step I'm making tool for this run on windows but need connecting phone.
MicroMod777 said:
Works great!!! Tested on boot.img extracted from 39a kdz. Bumped good.
When you gonna make this Windows based????
Click to expand...
Click to collapse
There is already a bump-tool for windows in G3 forum
http://forum.xda-developers.com/lg-g3/general/bump-window-version-t2956829
tropenfrucht said:
There is already a bump-tool for windows in G3 forum
http://forum.xda-developers.com/lg-g3/general/bump-window-version-t2956829
Click to expand...
Click to collapse
@MicroMod777
Have you tried ? I have ued but not work for me.
Just drag and drop the boot.img (or recovery.img) on the bump.exe in windows explorer.
Worked for me on win7-64bit.
somboons said:
@MicroMod777
Have you tried ? I have ued but not work for me.
Click to expand...
Click to collapse
Last time I tried it wouldn't boot, but yours did.
Hi, question to OP:
so with this patch, we can use LP bootloader? or still must use KK or JB?
i see in script that kernel is unpacked, then packed back.... question is why?
did you know that BIN and IMG is the same thing?
just rename *.bin to *.img
it's will be written the same to raw partition.
any way. well done. will be needed soon for my builds.
dorimanx said:
Hi, question to OP:
so with this patch, we can use LP bootloader? or still must use KK or JB?
i see in script that kernel is unpacked, then packed back.... question is why?
did you know that BIN and IMG is the same thing?
just rename *.bin to *.img
it's will be written the same to raw partition.
any way. well done. will be needed soon for my builds.
Click to expand...
Click to collapse
I'm waiting your work.I think you will work to make kernel for G4 too when it commig
this is not my work, bin,img is a same.I don't change main code of owner.
sorry for the noob question....
if we bump the lollipop kernel,can we use earlier custom roms directly in LP bootloader?
or it is needed to downgrade the bootloader?
Varun800 said:
sorry for the noob question....
if we bump the lollipop kernel,can we use earlier custom roms directly in LP bootloader?
or it is needed to downgrade the bootloader?
Click to expand...
Click to collapse
Need to have kk or jb bootloader.
LP bootloader will not boot any custom kernels or recovery.
Sent from my LG-D802
https://raw.githubusercontent.com/berryman13/Open_Bump/master/open_bump.py
Here's a fork I took right before it was taken down.
Not that it'll be of much use. Still cant boot LP bootloader, meh..
---------- Post added at 03:16 AM ---------- Previous post was at 02:44 AM ----------
dorimanx said:
Need to have kk or jb bootloader.
LP bootloader will not boot any custom kernels or recovery.
Sent from my LG-D802
Click to expand...
Click to collapse
Yeah. That's really lame, such a bummer.... I took a look at the code myself, and it seems to want to support lolli but doesn't work with lollipop bootloaders/recoveries/kernels. At least on my D800.
---------- Post added at 03:17 AM ---------- Previous post was at 03:16 AM ----------
dorimanx said:
Need to have kk or jb bootloader.
LP bootloader will not boot any custom kernels or recovery.
Sent from my LG-D802
Click to expand...
Click to collapse
Yeah. That's really lame, such a bummer.... I took a look at the code myself, and it seems to want to support lolli but doesn't work with lollipop bootloaders/recoveries/kernels. At least on my D800.
Can this be modified to bump a twrp recovery.img?
MicroMod777 said:
Can this be modified to bump a twrp recovery.img?
Click to expand...
Click to collapse
No need to be modified it also works for recovery images. Ofcourse for JB/KK BL
@berryman13 It won't be taken down, especially after all those discussions it probably won't make any difference if it would be taken down as it's already wide on the web.
https://github.com/CyboLabs/Open_Bump/
wulsic said:
No need to be modified it also works for recovery images. Ofcourse for JB/KK BL
@berryman13 It won't be taken down, especially after all those discussions it probably won't make any difference if it would be taken down as it's already wide on the web.
https://github.com/CyboLabs/Open_Bump/
Click to expand...
Click to collapse
I have something even better! You know how CyboGenik or something posted this originally on xda and there was a huge explosion? Everybody was so pissed. Then he removed a few keys from it and republished the entire branch,
I got a fork of it early though
like immediately; before it was rebased. Compare the code, there's additional keys. PMing you.
berryman13 said:
I have something even better! You know how CyboGenik or something posted this originally on xda and there was a huge explosion? Everybody was so pissed. Then he removed a few keys from it and republished the entire branch,
I got a fork of it early though
like immediately; before it was rebased. Compare the code, there's additional keys. PMing you.
Click to expand...
Click to collapse
Interesting. Do these additional keys help bump on LP? On our LG G Pad 8" v480 and v400 we are completely locked down on LP. We can even unlock our tablets which does nothing while on LP. I've bumped twrp.img and it still give security boot error. Maybe your additional keys can help!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Features:
-Based on J710FXXU3BQI8
-Security patch 2017-8-01
-Fully Deodexed
-Highly debloated, 560MB Only!!!
-Knox stuff removed
-Disabled Encryption & DM Verify for system
-Disabled Knox related stuff in build.prop
-Not Rooted, flash your desired root
ChangeLogs:
V2.0
-Added couple of apps back
-Fixed some bugs "hopefully"
-Added back some data/volte apks
-Updated ROM base to XXU3BQI8
V1.0
-Initial Release
Installation instructions:
-Download the ROM
-Wipe Data ,Cache Partitions
-Flash the ROM
-Flash ROOT ZIP, SuperSu or Magisk
Download:
V2.0
Drive
V1.0
Drive
Mega
Screenshots:
Note for Indian users: i dont know if volte will work or not, but files are already in the ROM
Another Note for users with other models, J710M/FN or any other model with the same chip, please buckup everything before trying to flash the ROM, i tried it on SM-J710FQ everything works fine so far
Enjoy :victory:.....
XDA:DevDB Information
Prism Barebone, ROM for the Samsung Galaxy J7
Contributors
AL_IRAQI
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: XXU3BQI8
Based On: Stock TW
Version Information
Status: No Longer Updated
Current Stable Version: V1.0
Stable Release Date: 2017-11-10
Created 2017-09-10
Last Updated 2017-12-22
Removed Apps
Removed Apps ZIP's:
Drive
Mega
Download other Samsung apps from their store or from the playstore here or apkmirror or sammobile
Reserved
Stock Images
Download Folder
Drive
Mega
Flash it with Odin
Note: its for SM-J710F model only, double & triple check your model before flashing, im not responsible for possible brick that happens when you flash it on the wrong model
Notes & Fixes:
Notes:
- Do not ask for AROMA
- Do not qoute OP
Fixes:
-GPS fix in attachments
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
maurce249 said:
Nice rom it only need some mods now
---------- Post added at 02:52 AM ---------- Previous post was at 02:47 AM ----------[/S
Click to expand...
Click to collapse
Mods like what ?
Always wanted a ROM this debloated!!!! Awesome
awesome
great work again thanks ?
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
parthopagol said:
Bro is there any way to enable call recording option since xposed is not working. thanks for effort
Click to expand...
Click to collapse
Try out CSC Expert
AL_IRAQI said:
Mods like what ? [/QU
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Great guidelines sir..excellent
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
maurce249 said:
AL_IRAQI said:
Mods like what ?
Click to expand...
Click to collapse
WELL FOR NOW ONCE I HAVE SCREEN SHOT IN QUICK SETTINGS I AM GOOD
Click to expand...
Click to collapse
Ill take a look, but chill with dem caps
parthopagol said:
Bro settings hanged when go to sim card manager. thanks otherwise all is ok. checked
Click to expand...
Click to collapse
Hmm, flash SimToolKit from removed zips
AL_IRAQI said:
Ill take a look, but chill with dem caps
Hmm, flash SimToolKit from removed zips
Click to expand...
Click to collapse
ok
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
I dont know but try flashing SamsungAntiRootRemoval
https://build.nethunter.com/samsung-tools/samsung-antiroot-removal/
parthopagol said:
Bro After root with magisk 14 i cannot uninstall any system apps even using root explorer. please suggest me.
Click to expand...
Click to collapse
Hey, System is mounted as read only by default, that is why you can remove or move stuff in there sometimes, try removing stuff from twrp
chinhlevn said:
I flashed stock nougat rom and TWRP successfully. After that I flashed Magisk but my phone reboot unsuccessfully. It booted and this message appeared:
" unable to restart your device. the integrity verification has failed"
It requires to factory reset and reboot. If i do so, everything'd come back to start point.
Please tell me if I did wrong somewhere.
Click to expand...
Click to collapse
You have to disable boot verification & device encryption after flashing root, use this zip
you have to wipe your storage from twrp also after flashing this zip
trouble sending text messages
Message application doesn't work correctly
Can't send text messages. Sorry for my bad english >.<
youtube watch?v=7JWgOaR3c9c