Develop Bugs

[ROM][CM11][Kitkat -4.4.2][PORT][UNOFFICIAL] CyanogenMod 11 For Canvas 4 A210

Android 4.4.2 KitKat for Canvas 4 has finally arrived. Say thanks to @chrmhoffmann for compiling the first ever CM11 for MT6589.
Original thread- http://forum.xda-developers.com/showthread.php?t=2676086
I just changed some things in wiko stairway build.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is an aftermarket firmware for a number of cell phones based on the open-source Android operating system. It offers features not found in the official Android based firmwares of vendors.
What works:
- SIM1 for phone calls (incoming/outgoing) and SMS, data (2g, 3g)
- Audio (microphone - now also outside phone calls, loudspeaker, headphones)
- most sensors (auto brightness seems to be broken, but sensor works)
- Wifi (not wifi direct)
- GPS (no A-GPS yet nor EPO assist files, so the fix can take a bit)
- candy crush, facebook and twitter
- 2nd sim card is a WIP (see 2nd post how to play with it)
- hw composer
- camera for taking pictures (not video)
What doesnt Work
What doesn't work:
- 2nd sim card 3G switch, Dual SIM is a WIP, not fully there yet
- re-enable after flightmode broken
- camera for "movies" does not work
- (hw) video en/decoding not enabled
- bluetooth not available
- auto brightness
- FM radio not available
- A-GPS does not work, GPS works though but slowish
- rest of MTK specifics (what?)
- battery usage stats
Downloads
1. Rom- http://d-h.st/DHG
2. CWM needs to be used- http://goo.im/devs/chrmhoffmann/wiko/cwm-recovery-wiko-stairway-kk-0.4.img
3.Gapps: http://wiki.cyanogenmod.org/w/Google_Apps

Instructions:
1.First of all install cwm given above.
2.Then wipe data, Cache and dalvik cache.
3. Format system.
4. Flash the rom.
5. Flash Gaaps.
Credits:
 @chrmhoffmann For bringing the first ever CM11 for an MT6589 device.
OmniROM project
Xplodwild
Dr-Shadow
pawitp
dhacker29
Dhogai Vannan (for network fix)
Please press thanks on chrmhoffmann's thread, he really did an awesome job!
Original Thread- http://forum.xda-developers.com/showthread.php?t=2676086
Sources
1. Kerenel: https://github.com/chrmhoffmann/android_kernel_wiko_stairway
2. Device: https://github.com/chrmhoffmann/android_device_wiko_stairway
3. Android: https://gerrit.omnirom.org/#/q/topic:mt6589,n,z
All credits go to @chrmhoffmann i m just posting this rom. And this is Android 4.4.2 rom not a themed rom and noobs please dont ask silly questions like fix this or that. Thank You.

reserved

Original build for wiko stairway works only thing needed is to remove first line of assert in build.properties
Sent from my Canvas4 using XDA Free mobile app

taralpan said:
Original build for wiko stairway works only thing needed is to remove first line of assert in build.properties
Sent from my Canvas4 using XDA Free mobile app
Click to expand...
Click to collapse
Yup I already mentioned it. But some people are afraid of flashing as they see it only for wiko stairway. So posted it in C4 section.
Sent from my C2305 using Tapatalk

can we use MTP in this

Why would someone use this rom?
Bro so many crucial features are not working. Bluetooth, gps, etc are very basic things. Why would anybody want to flash this rom in the first place? Making this rom for development is good, but for users is not so. Don't you think.
No offence bro. Just saying.

mumayank said:
Bro so many crucial features are not working. Bluetooth, gps, etc are very basic things. Why would anybody want to flash this rom in the first place? Making this rom for development is good, but for users is not so. Don't you think.
No offence bro. Just saying.
Click to expand...
Click to collapse
Cyanogen mod is built for mtk device is a gr8 thing cause it is made from incomplete kernel source n this is posted just for the person who respect the work n for the person who can improve . People r eagerly w8ng for kitkat for c4 can get a chance to use it n this is work in progress (WIP)

rahilj007 said:
Cyanogen mod is built for mtk device is a gr8 thing cause it is made from incomplete kernel source n this is posted just for the person who respect the work n for the person who can improve . People r eagerly w8ng for kitkat for c4 can get a chance to use it n this is work in progress (WIP)
Click to expand...
Click to collapse
As I said bro, no offence. I respect your work.

[ROM][Lollipop][5.1.1][Official] crDroid Android

This is crDroid for Sony Xperia Z1 (Honami)
crDroid build will always mainly based on CyanogenMod with some extra and few features (Cool and useful)
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Code:
IMPORTANT: Make sure you have an unlock Bootloader
Code:
WORKING
- RIL
- Mic
- FFMPEG Drivers
- Sound (Speaker and Headset)
- LED
- Thermal Manager
- Audio and Video Decoders/Encoders
- Cameras
- Torch
Code:
CREDITS
CM Rom
Slim Rom
Omni Rom
Many More.....
XDA:DevDB Information
crDroid Android Project, ROM for the Sony Xperia Z1
Contributors
davidteri91, Cristiano Matos
Source Code: https://github.com/crdroidandroid
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: CyanogenMod
Version Information
Status: Alpha
Created 2014-11-28
Last Updated 2014-11-28

Enjoy to Our Site on Google Plus​
Download​
Help us with Translations​
Donate to Maintain our build server​
Demo Video​
Download Gapps For Lollipop​

No News

Awesome yet another Lolipop Rom for the Z1.

Techpenguin5 said:
Awesome yet another Lolipop Rom for the Z1, btw the video link states that the "video is private" and cannot be viewed
Click to expand...
Click to collapse
mmm sorry XD try see again XD

Its working now thanks for bringing us Android L Crdroid, can't wait till cameras are working. Will test asap.

Damn.. Good Days are coming back. your builds are always awesome thanks man.

Techpenguin5 said:
Its working now thanks for bringing us Android L Cdroid, can't wait till cameras are working. Will test asap.
Click to expand...
Click to collapse
Me too I compile a build with some repos from aosp and with few changes the cameras are working but I lost some features so I think we can wait cm for the cameras about mic it needs a patch into level audio kernel

So smooth ROM and nice features in crDroid Custom Personalization.. u really deserve Donations.. All guys request to donate to keep the Devs intersted in Lollypop builds.

Great, another Lollipop Rom
I'm on cm12 unofficial and there's a deep sleep issue (CPU stuck at 300Mhz).
Is it here present too?

LemonJuls said:
Great, another Lollipop Rom
I'm on cm12 unofficial and there's a deep sleep issue (CPU stuck at 300Mhz).
Is it here present too?
Click to expand...
Click to collapse
+1
---------- Post added at 09:51 AM ---------- Previous post was at 09:50 AM ----------
+1

davidteri91 said:
Me too I compile a build with some repos from aosp and with few changes the cameras are working but I lost some features so I think we can wait cm for the cameras about mic it needs a patch into level audio kernel
Click to expand...
Click to collapse
What seemed to stop working were they Cdroid specific software, or Z1 hardware components?

Techpenguin5 said:
What seemed to stop working were they Cdroid specific software, or Z1 hardware components?
Click to expand...
Click to collapse
I say some changes into system_core are needed for make works the camera but this will make us lost some features from cm too

I think basic funcion are more important than cm features, when Camera and Mic has been fixed then can include other features
BTW sorry for my English

kamikaze134x said:
I think basic funcion are more important than cm features, when Camera and Mic has been fixed then can include other features
BTW sorry for my English
Click to expand...
Click to collapse
Note this is a development thread so the primary focus is to get the ROM to work as best it can. Fixing camera etc may be considered a waste of time by the OP if it is anyway to be fixed by the CM Dev team.
However if its not too much trouble for the Dev a fixed variant would be nice.

GPS working?

Just downloaded, it's booting right now

So after some testing I must say this is a pretty amazing Rom. Very smooth and quite stable. I have come across two bugs in addition to those mentioned in the OP.
*Thethering Portable Hotspot does not work
*For some reason when i plug my headphones in the phpne becomes a bit crazy and detects it as some kind of touchpad or something causing random nvigation, an issue i did not face on kitkat.
Edit: the phone also gets noticeably hot, rather quickly.

Another thing i forgot to mention is that, when you try to enable tethering portable hotspot it not only fails, but breaks wifi aswell requiring a reboot. The other issue is that when charging it does not display the charging message on the lockscreen.

Techpenguin5 said:
Another thing i forgot to mention is that, when you try to enable tethering portable hotspot it not only fails, but breaks wifi aswell requiring a reboot. The other issue is that when charging it does not display the charging message on the lockscreen.
Click to expand...
Click to collapse
OK thanks I will check the WiFi sockets maybe them are needed an update of permissions
Thanks for your feedback

[ROM][5.0.2][OFFICIAL] CM-12.0 for tf300t

CyanogenMod is a free, community built, aftermarket firmware distribution of Android 5 (Lollipop), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed.
This rom is for the Asus TF300T with or without dock.
Special thanks to: XpLoDWilD, bumble-bee (for tf201 device tree from which this original tree was inspired), loganmc10, dasunsrule32, jruesga, cyanogenmod, pawitp, etc.....
recent changelog:
- DRM with widevine fixed (that makes google play movies work). Thx go to stargo!
Older changelog:
- f2fs added
Changelog for version 0.2:
- resync with CM-12
- sync kernel with lots of stuff from grouper (and/or thoemy's endeavoru).
Chris
Not working:
- dock battery status
- GPS orbit downloads
- some dock keys (including wake up by pressing dock keys)
Installation instructions:
- put zip on sdcard
- reboot to recovery (seems that you have to first: unmount /data).
- flash zip
- wipe (have not tried if upgrade from kitkat works and won't test this anyway)
For newer updates with CM updater and/or if you want f2fs, you might need a new recovery. Here is the cm recovery from 5-FEB-2015: recovery-cm-5-FEB-2015.img
Flash this with:
adb reboot bootloader
fastboot flash recovery recovery-cm-25-JAN-2015.img
fastboot reboot
Chris

CM12!
Get ready to flash!

Definitely worth a flash.

Dear chris,
Is it work on canvas 2 plus????
Chipset is mtk6589..
Waiting for your reply...
If not please work on this...
Thanking you..

I tried to encrypt the device. I Let it run for ~3 hours. Stuck on boot.
But great start
EDIT: SO Ill start testing this ROM now
Got my first reboot. And RIGHT now in this time of this writing my second reboot
Here is the first log. Second to come.
EDIT2: Second log added

Any developpement

@chrmhoffmann
I see you uploaded a huge bunch of patches for CM12. Thank you very much for all your efforts

[GER]Roxxor said:
@chrmhoffmann
I see you uploaded a huge bunch of patches for CM12. Thank you very much for all your efforts
Click to expand...
Click to collapse
No prob. I just re-synced the kernel with stuff from grouper. Those things are not really necessary for cm-12.0
EDIT: there's a new 0.2 version that has recent changes.
Chris

willing to try
I loaded the Omni version which worked but was a little slow - using ART not DALVIK. If anyone else tries this, I found the experience was interesting - you will have to choose a small(er) version of GAPPs to fit on the system partition. I used the version on the XDA PA-GAPPs site that was just over 200 MB in size. I'm back using CM11 because I use this puppy every day.

Official cm12 is out but no tf300

Selinux is not in enforced mode so I can't enable nightlies. That's a must for cm now. If any one can help me on that...
Chris

hi, just had a go with the rom seems very good but i couldnt connect to the internet, keep up the good work
thanks

chrmhoffmann said:
Selinux is not in enforced mode so I can't enable nightlies. That's a must for cm now. If any one can help me on that...
Chris
Click to expand...
Click to collapse
And how was that in cm11 then?
Sent from my TF300T using XDA Premium 4 mobile app

androidjel said:
And how was that in cm11 then?
Sent from my TF300T using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It was not a hard requirement to have Selinux enabled in cm-11.0. It is now a minimum requirement from CM.
BTW: I have fixed the major selinux denials now and the tf300t is now accepted on the official CM nightlies.
Chris

Since I installed cm snapshot 12 it won't appear any nightlies updates.. How can I search them with the cm updater?

igoigo said:
Since I installed cm snapshot 12 it won't appear any nightlies updates.. How can I search them with the cm updater?
Click to expand...
Click to collapse
Download a nightly and place it in the cmupdater folder. Go to your updater and flash the nightly that shows up. After reboot you will see nightly's again.

chrmhoffmann said:
It was not a hard requirement to have Selinux enabled in cm-11.0. It is now a minimum requirement from CM.
BTW: I have fixed the major selinux denials now and the tf300t is now accepted on the official CM nightlies.
Chris
Click to expand...
Click to collapse
So we will see cm12 official nightlies appear on cyanogenmod.org soon?

counterfeit187 said:
So we will see cm12 official nightlies appear on cyanogenmod.org soon?
Click to expand...
Click to collapse
Ones just finished being built downloading now

Thank you guys, for the awesome work you do!!!
Edit: Is there an installation guide?
I cant seem to get this to clean install

ricktendo said:
Thank you guys, for the awesome work you do!!!
Edit: Is there an installation guide?
I cant seem to get this to clean install
Click to expand...
Click to collapse
What's the issue? You should be able to flash this with the existing CWM recovery (from the CM11 thread).
Chris

[06/05][6.0.1_r43] Temasek's UNOFFICIAL BUILD v7.9(Based on CM13)

Temasek's UNOFFICIAL CM13 BUILDS
This is the UNOFFICIAL Build of Temasek based on CM13.​
DISCLAIMER
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
STUFFS THAT ARE WORKING
- RIL
- Mic
- FFMPEG Drivers
- Sound (Speaker and Headset)
- LED
- Thermal Manager
- Audio and Video Decoders/Encoders [HW Partially Broken]
- WiFi
- Bluetooth
- Mobile Data connection
- Camera (but takes pictures in bad quality and is laggy , which is excepted!)
**Note**
YOU NEED TO HAVE AN UNLOCKED BOOTLOADER TO FLASH THIS ROM!!
Now Welcome To Download Section
Here is The Link: https://www.androidfilehost.com/?w=files&flid=50951
Now to the INSTALLATION part
**The lastest version TWRP (3.0) is recommended or Philz CWM.
1. Download the ROM.
2. Download the appropriate GApps. (Personally I use open GApps)
3. Back up any and all important data.
5. WIPE DALVIK/CACHE/DATA/FACTORY RESET.
6. WIPE SYSTEM.
7. Flash the ROM in recovery.
8. Flash the GApps.
9. WIPE DALVIK/CACHE (for good measure).
10. If your using C6902 then flash the modem fille created by @MightyBear007.
11. Reboot your device.
12. And Enjoy/
CHANGELOG​
Source Code: https://github.com/temasek
Kernel Source: https://github.com/CyanogenMod/android_kernel_sony_msm
CREDITS
@temasek
@Men_in_black007
@MZO​
** I will try to provide updates as soon as new build comes. And as I am just 15 I need to concentrate on my school also.**​
Please THANK if you like this ROM and my WORK.​

Reserved

Finally ?

I see a camera commit in the CM Gerrit...is it merged in this build?

drakonizer said:
I see a camera commit in the CM Gerrit...is it merged in this build?
Click to expand...
Click to collapse
@drakonizer oh not yet buddy. As camera is still on alpha stage and it lags a lot. I will add camera maybe after few builds when it becomes more stable.

Awesome to hear that there are still developers working on the z1 thank you so much for creating this. I really dont want to buy a new phone just to use android m as daily driver. Cant wait till you get evrything working.

#NEW BUILD is available.
Changelog in settings/about/changelog
Wifi and bluetooth has been fixed and is a lot more stable.
A Question: Do u guys want me to upload the rom to Dev-Host or do u guys prefer AndroidFileHost? Let me know.
Enjoy.

markakash said:
#NEW BUILD is available.
Changelog in settings/about/changelog
Wifi and bluetooth has been fixed and is a lot more stable.
A Question: Do u guys want me to upload the rom to Dev-Host or do u guys prefer AndroidFileHost? Let me know.
Enjoy.
Click to expand...
Click to collapse
Good Work Brother
Awsome rom
I will test it tonight
I prefer Afh

IMHO @markakash Android file host is better ?

mobile data not working

Hello,
i've just test the rom, i confirm mobile data not working on C6903.
Thanks

Hello everyone i checked and ur right mobile data isnt working. I will fix it in next update hopefully.

markakash said:
Hello everyone i checked and ur right mobile data isnt working. I will fix it in next update hopefully.
Click to expand...
Click to collapse
Please add the camera too...I tried it on AOKP, its barely usable yes, but still works at least for basic stuff. Thanks!
Sent using XDA One

drakonizer said:
Please add the camera too...I tried it on AOKP, its barely usable yes, but still works at least for basic stuff. Thanks!
Sent using XDA One
Click to expand...
Click to collapse
@drakonizer i would really like to add it. As i m still a learner and a beginner i will do my best to add new stuffs as soon as possible. I will let u know when i will add the camera.
Regards.

I want to go back to 5.1, there is no twrp recovere in this rom, how can I install it?

looking at the op it says data is working but can anyone running the rom confirm it?

MrOsamaful said:
I want to go back to 5.1, there is no twrp recovere in this rom, how can I install it?
Click to expand...
Click to collapse
When sony logo apears press volume up button
And you will see twrp

#NEW BUILD IS AVAILABLE
*Backlight issue has been fixed hopefully
And sorry to say but i have not been able to fix Mobile Data Connection yet.
#If u want complete changelog go into Settings/Aboutphone/Changelog
The ROM feels a lot smoother.
Enjoy.
Regards
Akash

markakash said:
#NEW BUILD IS AVAILABLE
*Backlight issue has been fixed hopefully
And sorry to say but i have not been able to fix Mobile Data Connection yet.
#If u want complete changelog go into Settings/Aboutphone/Changelog
The ROM feels a lot smoother.
Enjoy.
Regards
Akash
Click to expand...
Click to collapse
Sony has released new MM blobs that fix the data connectivity issue.
Sent from my XT760

drakonizer said:
Sony has released new MM blobs that fix the data connectivity issue.
Sent from my XT760
Click to expand...
Click to collapse
@drakonizer i just now saw it but as i m using cm source and kernel i need to wait until cm merges those changes.

[ROM] [WIP] [UNOFFICIAL] OmniROM 6.0 for Mi5

#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
Click to expand...
Click to collapse
My first ROM port: OmniROM 6.0 for Mi5
This is a work in progress and is not thought to be used yet.
It's not OmniROM's fault that many things don't work!
What works:
- It boots (sometimes)
- General usage, web browsing, ...
- Wifi
- Sound, headphones
What doesn't work:
- Telephony
- Mobile data
- Playing music (DSPManager FCs)
- Camera
- Graphics race conditions (sometimes it gets stuck at the MI logo, just reboot)
- Ambient display
- Other stuff I forgot
Features:
- AOSP-Based
- Much customization options
- Performance options to tweak kernel settings
- DSPManager
- Chromium as web browser
- OmniSwitch
- Polished apps (clock, calender, gallery, ...)
- Probably more
Screenshots:
See attachments
Downloads:
https://petabyteboy.de/daten/omni-gemini/
Clean flash when coming from CM, MIUI or other ROMs, dirty flash on update from previous OmniROM 6.0 build
If you have problems with it asking for decryption phrase on first boot, reboot to fastboot and "fastboot format userdata" (you will lose all data, including internal sdcard files!)
You will need to flash firmware for custom built kernel: http://forum.xda-developers.com/mi-5/development/tool-flashable-firmware-twrp-easy-t3474898
GApps: Well, I won't link a recommended GApps package, because I won't recommend GApps at all. Take a look at https://fdroid.org/ and https://microg.org/, which I would recommend.
Sources:
Device tree: https://github.com/plumpudding/android_device_xiaomi_gemini/tree/omni-6.0-2
Kernel: https://github.com/CyanogenMod/android_kernel_oneplus_msm8996
OmniROM: https://github.com/omnirom/
If you have any problems or questions compiling it, just PM me!
Credits:
- @bgcngm for the huge work on the Mi5 device tree
- @Gandalf / jakew02 on freenode #omni IRC for always answering my questions
- @h2o64, @33bca
- All those who helped to create OmniROM
Donations:
I want all donations to go to @bgcngm (see his profile page for paypal links)
Although I spent a reasonable amount of time on this, he has probably spent 100x as much time

reserved

#Great Dev, One more ROM added up in Index.
Looks Promising, was always a fan of OmniRom,
Hope to see a daily driver in near future.

Reserved...
Thx bro

Thnx but plz do add volte feature
Reserved

Fixed telephony (again, worked at some time before), build coming in the evening (like 10-15 hrs from now), because I don't want 2 builds on one day to avoid naming confusion and I'm hoping to get mobile data today.

PetaByteBoy said:
Fixed telephony (again, worked at some time before), build coming in the evening (like 10-15 hrs from now), because I don't want 2 builds on one day to avoid naming confusion and I'm hoping to get mobile data today.
Click to expand...
Click to collapse
Did you manage to get it?
Sent from my Xiaomi Mi5 using Tapatalk

iXanza said:
Did you manage to get it?
Sent from my Xiaomi Mi5 using Tapatalk
Click to expand...
Click to collapse
It worked before the current build, but I still had debug options on (insecure adb), so I rebuilt the whole thing and after that it didn't recognize the SIMs. That's why I said I fixed it *again*. Now I tried to change some options back, but now the images won't boot at all.
School has started again and I don't have much time. Maybe this weekend when the last exams are done..
I'd very much appreciate it if you tried do some work on the device tree (I'm just trying options that sound related (disable CAF RIL, disable CNE)). Reversing commits which add proprietary qcom stuff is the easiest way to get stuff running from my (rather small) experience.

I guess I won't update this anymore. When I have some time I'll start working on OmniRom 7 / 7.1 for Mi5 which should be easier as the CM14.1 DT uses a little less blobs.