ROM crash, Odin crash, partly saved, assistance needed - Galaxy Note II Q&A, Help & Troubleshooting

Hi there
FIrst of all sorry for the way i'm talking but well im a foreigner and sometimes make mistakes.
To the point. My Note 2 had Ditto DN4 flashed, it was working fine BUT today it just decided not to. It kept rebooting after 4 sec every time so i decided to reflash rom, i did it aaand still the same problem. Ok then, i grabbed this '3 files ROM with PIT file', sorry but i don't know the proper name. Either way, i tried to flash it using odin and thats when things started to go crazy. For some reasons it did not flashed and i was left with just DOWNLOAD MODE! I have no idea why but odin kept saying FAILED after NAND WRITE line. I panicked, flashed it like 45416165415 times but still did not work. After i read a few threads i thought, that i bricked the device BUT i thought what the hell, I'll flash recovery again aaand IT WORKED!
So now, what I'm asking for. Can anyone tell me what are the steps now? What ROM should i flash, if i had MJ5 bootloader? (well i think so, in Ditto thread they say that it works only on MJ5 but i don't really remember whether i did flash it or not). I'll be really really gratefull for any help. I just don't want to ruin it after that recovery flashed.

Unbelievable things happens frequently when using a custom rom or kernel ,especially on the device like N7105.......My pac-ROM got crashed when converting an app to system folder with Ti-backup and reboot,it blacked screen after the first logo screen, and failed enter recovery despite I pulled out battery. When I got crazy and was about to work it out with odin and it entered rec.....I think maybe the single tar.md5 file will help the most......If you a lucky enough

Related

[Q] No ROMs taking, keep getting no MD5 message, phone close to bricked.

I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?

[Q] I need a little guidance... (I'm desperate)

Hello everyone. I'm quite new to this whole fiddling with my S3 thing. I mean, I successfully flashed a previous version of Danvdh's Dandroid ROM a few months ago but was not pleased when it would not pick up ANY GPS satellites even after 20 minutes of waiting to get a fix. Of course I tried everything from tightening screws (none of my screws were loose) to that aGPS patch (for which it gave me the wrong location even after trying what the notes suggest).
Having said that, yesterday, I tried flashing other ROMs (like Beanstalk) in hopes of getting better GPS. Now Beanstalk worked fine and gave me GPS, but with that I then ran into problems mounting and formatting a new SD card. So then I flashed the newest version of Dandroid and successfully mounted the SD card, but it still gave me GPS problems, at which point I was kind of disheartened and decided to give saranhai's StockMOD ROM a try.
I ran into all kinds of problems.
1. I'm sure this isn't the dev's fault, but my CWM version 6.0.3.7 (is that old?) won't recognize any kind of change in my internal SD card since late yesterday. My desktop and ES file explorer both register the same files and folders, but CWM still sees old files like the zip files for Beanstalk and Dandroid which don't appear on my computer??? And it won't see any new files??? What did I do wrong? Therefore, I flashed things from my external SD card from there. (Was that wrong to do?) Also, every time I try to reboot through CWM, it says root access may have been lost and asks if I want to try and fix it. I say no because my SuperSU still works?
2. After FIRST flashing Dandroid 5.1 I noticed Wi-Fi wasn't working. A post from the Dandroid thread said to flash a kernel "or update to the newest bootloaders." I flashed the kernel he provided and found out too late that it was for T999L or something and my phone is T999. I'm kinda surprised my phone didn't brick then. Anyway, I got Wi-Fi, but whenever I tried to turn on mobile data, it said to insert a SIM card?? I'm sure it's because I flashed that wrong kernel. When I go into Settings > About Device it says the Baseband version is unknown and the Kernel version is as follows:
3.0.31-1804024
[email protected]
Sat Oct 5 00:13:48 KST 2013
and the build number: JSS15J.T999UVUEMJC
EDIT: I FOUND OUT MY PHONE WAS ACTUALLY T999L NOT T999. Currently trying to fix things. I'll get back to the thread.
3. So hoping saranhai's StockMOD ROM would give me the fresh start I so desperately needed, I followed his instructions step by step from flashing the right modem FIRST then flashing the ROM, but alas, the same "Insert SIM card...." error still plagued me. You would not believe how sad I got. (I'm still pretty sad.) At that point I tried REALLY hard to familiarize myself with what I was doing, reading the thread carefully, looking through that glossary thread to help me keep up with the techie terms, and searching for instructions on how to get it fixed, but I couldn't find anything and I was stuck.
4. This morning I flashed the Insecure kernel the StockMOD ROM thread provided and I still get the error.
5. I tried to restore from a backup I made last week on CWM, but it kept saying "checking MD5 files" and them giving me an error about not being able to restore.
As you all can see, I probably made a HUGE mess out of my phone and it might come as a huge surprise that I haven't bricked it completely. I'm extremely desperate at this point and I've admitted that I don't know what I'm doing. :crying:
It's come to the point where I just want a stable handset that will give me the services I want (GPS, mobile data, Wi-Fi, etc.) and I'm beginning to think this root lyfe isn't for me. I searched for guides on how to return to stock and unroot, but all the guides are different and I'm so confused and overwhelmed as to what I should do at this point. Please, please, please! A little guidance would be GREATLY appreciated!
Thanks for your time!
First off don't get disheartened. You did demonstrate a genuine attempt to help yourself and try your best on your own. Yes mistakes happen. We all do that. For what its worth, no one is born knowledgeable in these areas. We all learn.
Ok so what do we do next ? Lets start with a clean slate and put that all behind you. Yes your current recovery CWM is indeed dated and that's the reason for some of the issues you have.
Follow these steps.
1. Take UVDMD5 version of Root66 from here. Use ODIN to flash it to your phone. If you need a guide on how to use ODIN, read this thread carefully.
2. Once that Stock firmware has been updated and your phone boots fine, check if you have GPS and all the other features working to your satisfaction. Given your problems with GPS, I strongly recommend taking a GPS fix at this time.
3. Once that's working fine, flash the latest CWM Touch Recovery (version 6.0.4.5 for D2TMO). You can use Rom Manager from Play store.
4. Take a Nandroid before proceeding. When you do, uncheck the generate MD5 and enable Compression.
5. Now its your choice. You could flash Saranhai's Stock Mod or Danvdh's Dandroid. Both are good Roms and its your call. Check the GPS working after you flash Rom of your choice.
If you do choose to go after Saranhai's Rom and get into the Wi-Fi Problems, post here before you try any solutions. With Danvdh's Rom, there are certain steps to enable Root. You can't just flash SuperSU and hope to gain Root.
Perseus71 said:
First off don't get disheartened. You did demonstrate a genuine attempt to help yourself and try your best on your own. Yes mistakes happen. We all do that. For what its worth, no one is born knowledgeable in these areas. We all learn.
Ok so what do we do next ? Lets start with a clean slate and put that all behind you. Yes your current recovery CWM is indeed dated and that's the reason for some of the issues you have.
Follow these steps.
1. Take UVDMD5 version of Root66 from here. Use ODIN to flash it to your phone. If you need a guide on how to use ODIN, read this thread carefully.
2. Once that Stock firmware has been updated and your phone boots fine, check if you have GPS and all the other features working to your satisfaction. Given your problems with GPS, I strongly recommend taking a GPS fix at this time.
3. Once that's working fine, flash the latest CWM Touch Recovery (version 6.0.4.5 for D2TMO). You can use Rom Manager from Play store.
4. Take a Nandroid before proceeding. When you do, uncheck the generate MD5 and enable Compression.
5. Now its your choice. You could flash Saranhai's Stock Mod or Danvdh's Dandroid. Both are good Roms and its your call. Check the GPS working after you flash Rom of your choice.
If you do choose to go after Saranhai's Rom and get into the Wi-Fi Problems, post here before you try any solutions. With Danvdh's Rom, there are certain steps to enable Root. You can't just flash SuperSU and hope to gain Root.
Click to expand...
Click to collapse
Thanks so much for your detailed reply!
After a little bit of browsing the forum, I found that my IMEI seems to be missing and simply flashing the correct modems/kernels/whatever you call them does not fix it. I will go through your instructions and then report the results.
I read on here that sometimes it just happens randomly after flashing 4.3 ROMs? Well I certainly hope I get back my IMEI and hope it's not blacklisted :/ Apparently I can't access signal or data without it.
Thank you again!
EDIT: Does an "Unknown" IMEI mean I've totally lost it?
EDIT 2: Okay now I know God hates me. I downloaded the Root66 file and Odin will NOT let me flash it onto my phone. Keeps giving me aboot (???) errors no matter what port I use! I know I took a risk tinkering with my phone but I don't think I deserve this!
Honestly now I don't want anything to do with rooting and custom ROMs anymore. I think I'm too stupid for this. I think I just want it back to the way it was when I bought it. Could you please help me to do that?
I'm done with this root stuff, I can't do it anymore.
Sorry, I honestly don't mean to come off as whiny or ungrateful, I've just spent two days trying to figure this stuff out and it's getting me VERY tired and VERY irritated.
Oops I think I forgot to mention that you will have to put the phone in Download mode before you plug it in for ODIN. In order to get into Download mode you turn off the phone and press Volume Down AND HOME AND POWER simultaneously. If you are doing it for the first time, it may seem hard. Be patient.
Yes I suspected you to be "Missing IMEI". That's why suggested going to Stock. Your Call & Data problems come from there.
My steps do take you back to Stock.

[Q] sprint gs3 wont boot into twrp

What's up guys!
Using ROM installer I flashed vanir 4.4 along with 4.4 gapps on my sprint gs3 sph l710. I wiped the cache and it looked as if it were installing fine but winded up getting stuck in boot loop mode instead. Now when I try to boot into recovery the twrp screen flashes and then it goes straight into bootlop mode from there. Now i cant acsess any of my backups. I can get into down load mode but unfortunately my computers messed up right now. I can't hit the run button on Odin because the screen is too big. I know it sucks!!! Does anyone know some tricks I can use or have any recommendations. Your help would be greatly appreciated! BTW.. I was running illusion 4.3 when this happened.
ddray said:
What's up guys!
Using ROM installer I flashed vanir 4.4 along with 4.4 gapps on my sprint gs3 sph l710. I wiped the cache and it looked as if it were installing fine but winded up getting stuck in boot loop mode instead. Now when I try to boot into recovery the twrp screen flashes and then it goes straight into bootlop mode from there. Now i cant acsess any of my backups. I can get into down load mode but unfortunately my computers messed up right now. I can't hit the run button on Odin because the screen is too big. I know it sucks!!! Does anyone know some tricks I can use or have any recommendations. Your help would be greatly appreciated! BTW.. I was running illusion 4.3 when this happened.
Click to expand...
Click to collapse
Can you try using this? http://forum.xda-developers.com/showthread.php?t=1746680
Maybe that'll work, you can use it to return to stock, and if anything I would recommend going back to stock before doing anything else. Also, it may not be the consensus of the site here but in my own opinion, I don't like using rom installer or goo manager or anything. I like doing it all myself in recovery. I've heard one too many stories of people getting hardbricked because their rom installer or whatever downloaded the international version of the rom they wanted :/ always best to check your own md5 checksums and make sure you're downloading the rom for your phone from your phone's forum.
As for the exact reason your phone did that? I couldn't tell you, maybe with a little more info someone more knowledgeable here could tell you
So i got my computer fixed. I havent tried the tool kit in the thread you recommeded. I decided first to use a stock file i have on odin first that has saved me from softbricks in the past. I set everything up hit start, watched the process complete with the pass. Now it shows the stock boot animation but still stuck in bootloop mode. I put it into recovery,which is now stock instead of twrp, wiped cache, davlik cache and factory reset then i reconnected to odin and reflashed the stock file. Still stuck in bootloop mode!!!! Plain reboot and same thing :/ so for the hell of it, i wanted to see if i can to my backups by restoring twrp. So i flashed my cf auto root and then flashed my twrp file and bam!!!! Twrp was full functioning with all my backups!!! :laugh: next i restored my latest illusion 4.3 rom and wala! Ive got a fully functioning rooted phone with a custom rom. I flipped through everything to make sure it looks good and it does. Except.... any photos and music that are saved to phone and not sd card are gone I dont understand, everthing else is backed. Contacts, call logs, messages, text messages, apps, customised settings etc...I even flashed my carbon rom that had the same music and pics. When i open gallery it shows the photo count in snapseed and others im looking for but then they all start dissapearing!!! i also dont understand why the stock file which has saved me from softbricks before didnt work. I dont know anything about checking md 5 checksums but if its worth the time ill do my research! Im happy i got my phone working but i would like to be more solid in what im doing. Maybe someone can help shed some light on this.

[Q] help, s3 t999 4.3 can't flash, missing root access problem

So I rooted my s3 t999 so I could get cyaneginemod. I used the flashing rom way, and it didn't work,(i used twerp recovery) it kept saying failed, and then I went to the easier way of installing the rom with, the new cyaneinge mod app, (I'm still rooted). Then after waiting for it too finish my phone rebooted, but cyaneinge was not on it, instead it came with a page that said root missing I clicked on yes fix the missing root, n well nothing happens I was back on touchwiz, superuser was their but Samsung Knox kept it from doing anything but I used supersu to disable it. I thought that knox was keeping the cyaneinge mod app from working, so I decided to downgrade to 4.1 when knox didn't exist, bless that time, but I couldn't since odin kept failing at flashing a stock rom, I did this soo msoon times I went through every firm ware n back to 4.3, it kept failing, im pretty sure its boot locked, but the root is also limited, every time I reboot n go to recovery n leave it asked me if it should fix the missing root, but yes or no, it wont change, n every time I reboot it says optimizing apps 0 of 48, it takes at least 5 min to go through. N after going through every forum, YouTube video, asking friends, I still can't find a solution, n im stuck on a screwd up root version of 4.3 plz help
You cannot flash an older firmware once you are on 4.3. What was the error message you got when flashing the rom?
serio22 said:
You cannot flash an older firmware once you are on 4.3. What was the error message you got when flashing the rom?
Click to expand...
Click to collapse
i don't remember but I used twrp n as I Was flashing through rom it said failed, same thing when I flashed 4.3 stock firmware on odin later
If you have Kies that will give you problems with Odin. And make sure you have latest twrp
Reflash your current firmware with Odin. Then flash recovery, then the rom. No need to root first.
If the rom flash fails, you need to post the exact error it gives, and attach the recovery.log or theres little we can do to help.
We could start throwing out guesses, but there could be dozens of things potentiality causing your problem.

[fixed] Flashed wrong TWRP, possible hard brick? Please help :'(

I've had a horrible run of luck these past couple weeks.. Deep 2nd degree burns, two broken s6 edges from sliding off surface, and a drop all at short Heights, even with case on.. So now that I was laid up in bed recovering from work accident I decided to get my tmobile p607t I just picked up and my edge all sorted out.. This is what I did:
Downgraded from 4.4.4 to 4.4.2
Towelroot and supersu
Installed titanium backup
Decided to install custom rom and make nandroid backup
Installed flashify
Erroneously installed twrp for nexus 6 (it's a real ****ty mistake I wasn't paying enough attention, probably pain killers had something to do with it and didn't realize that for all the mentions of the note in the article that they were actually linking to nexus 6 twrp)
Flashed twrp with flashify, reboot, and would only boot into download mode
Booted into odin tried flashing the same stock 4.4.2 knowing it probably wouldn't fix problem, errored out, unsuccessful
Read something about flashing twrp with odin so tried that, it didn't work, heard cwm may work with odin, Unplugged tablet from pc, power cycled, started up with black screen.
Found out it was on by plugging back into pc and odin showed "Added"
Power cycle odin shows removed and added again.
Installed adb/fastboot and drivers via installer (win7 x64)
Just so see what was going on with tab figured I would try to flash stock again to see what error was, so I would be able to mention it in this post, says no pit partition and screen is still black..
This is the point where I decided to post, during all that I did read a lot and did try searching around for something model specific, but am really concerned about doing anything else without advice.. Not really sure if it's even fixable, but hoping that because odin still sees it, maybe it's not a lost cause.. Even if it is just pointing me in the right direction it'd be helpful. I'd be willing to donate to xda's server costs if it takes really in depth help, I've benefited a lot from the site over many years and never really had to post before because I've never had any real issues, usually much more thorough with reading things. Thanks in advance.
I have family coming over so will more than likely be back to working on it tonight..
Edit:
Jesus in doing a horrible job at life.. Posted in wrong sub.. Should be in note 10.1 2014 forum, please move to correct forum.. Sorry
Edited to add:
It's fixed, I located pit partition file, loaded that and stock rom in odin, attempted to flash but it failed, power cycled and download mode appeared on tablet, without error and odin automatically began flashing, everything is back to normal..
defcomexperiment said:
I've had a horrible run of luck these past couple weeks.. Deep 2nd degree burns, two broken s6 edges from sliding off surface, and a drop all at short Heights, even with case on.. So now that I was laid up in bed recovering from work accident I decided to get my tmobile p607t I just picked up and my edge all sorted out.. This is what I did:
Downgraded from 4.4.4 to 4.4.2
Towelroot and supersu
Installed titanium backup
Decided to install custom rom and make nandroid backup
Installed flashify
Erroneously installed twrp for nexus 6 (it's a real ****ty mistake I wasn't paying enough attention, probably pain killers had something to do with it and didn't realize that for all the mentions of the note in the article that they were actually linking to nexus 6 twrp)
Flashed twrp with flashify, reboot, and would only boot into download mode
Booted into odin tried flashing the same stock 4.4.2 knowing it probably wouldn't fix problem, errored out, unsuccessful
Read something about flashing twrp with odin so tried that, it didn't work, heard cwm may work with odin, Unplugged tablet from pc, power cycled, started up with black screen.
Found out it was on by plugging back into pc and odin showed "Added"
Power cycle odin shows removed and added again.
Installed adb/fastboot and drivers via installer (win7 x64)
Just so see what was going on with tab figured I would try to flash stock again to see what error was, so I would be able to mention it in this post, says no pit partition and screen is still black..
This is the point where I decided to post, during all that I did read a lot and did try searching around for something model specific, but am really concerned about doing anything else without advice.. Not really sure if it's even fixable, but hoping that because odin still sees it, maybe it's not a lost cause.. Even if it is just pointing me in the right direction it'd be helpful. I'd be willing to donate to xda's server costs if it takes really in depth help, I've benefited a lot from the site over many years and never really had to post before because I've never had any real issues, usually much more thorough with reading things. Thanks in advance.
I have family coming over so will more than likely be back to working on it tonight..
Edit:
Jesus in doing a horrible job at life.. Posted in wrong sub.. Should be in note 10.1 2014 forum, please move to correct forum.. Sorry
Edited to add:
It's fixed, I located pit partition file, loaded that and stock rom in odin, attempted to flash but it failed, power cycled and download mode appeared on tablet, without error and odin automatically began flashing, everything is back to normal..
Click to expand...
Click to collapse
Really unlucky but in my country we use to say good end everything good. I hope to have better days from now on.
Sent from my GT-N7100
Thank you, yes things are starting to look much better. Burn is healed, my devices are working as they should..

Categories

Resources