When every I send and email from my watch the other person gets the message as the subject line and message body just says "Sent via voice". I have tried various email apps ie. Cloud Magic and WearMail. Both apps will work fine but only when replying to an email. It seems to use something else for composing from scratch. Does anyone know what I need to change or configure someplace?
Bump, I have the same issue with Asus Zenwatch and LG G2. Tried everything that OP has tried.
Related
Hi all,
I have LVSW WM6 and I can create NEW email and send it using Pocket Outlook. However, if I want to send an email via "reply", I kept on getting a message that says:
The message could not be sent. Check that you have network coverage and that you account information is correct. Then try sending again.
I have good 3G coverage and can browse the Internet via PIE or Netfront. I have enabled POP in my GMail account.
Is there a particular POP setting that I must configure in WM6 for sending replied email via GMail?
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
Couple days ago? Did you made any changes to the device before this happened?
I wonder if this is caused by GMail and have nothing to do with WM6...
hknoener said:
Kinda funny, i had no problem until a couple days ago, with my gmail accounts, to send messages. Not exactly same problem, but the message is the same. My WM6 is Black 2.5.
Click to expand...
Click to collapse
I had the same problem, and the solution i found is the following:
When you press the reply button you find: "Edit the sender's message" underlined.
click on it and the original sender's message will open fully
Now you can write your reply and send it well
Thanks a lot pasil.pt it seems to be the solution!!!
I had very same issue. Using gmail on Treo800/winmo 6.1, I get a message that refuses to send. Once stuck in outbox, nothing will send unless I remove it. Every time this happened I saved the offensive msg and now I have 7 of them. When I retry send any, each one fails. These are the facts for my case:
1) It happens on some messages.
2) Happens when replying or forwarding.
3) If I delete the content, the msg sends fine. At least, I can rule out problems with msg properties and header.
One thing I noticed when comparing native PO to FlexMail, is FM defaults to indenting the original msg using '>' character. PO does not. Since FM can send all these 7 msgs fine, I thought this should be good start to investigate.
So I grabbed one of the bad msgs and I indented it manually line by line and to my surprise, It sent successfully. I repeated this with each of the 7 msgs and all sent just fine.
PO does not have a UI control to toggle the 'indentbody' and 'indent character' features, but I did see there are some registry keys related. However, I could not get these keys to work.
HKCU/sofware/microsoft/inbox/settings
--> AddLeading
--> IndentBody
--> LeadChar
I can not get my changes to stick and not sure how to enter a 'dword' value for the above.
Can someone please help me find out...
- steps in changing above values and make them effective
- how to enable body indenting, make e.g. '>' the leading char using dword values.
I could not find a tweak tool to do this as well.
Any assistance will be highly appreciated.
Same issue. Very frustrating. After reading last, i tried deleting the original text (below but not including the header) and the message sent fine.
Back on the G1, i used to use Contact Sender. It was quick and simple.
It doesnt work with Android 2.0 and up.
I tried the premier, but it doesnt work with my G2. Using CM6.1
I started using CIACS Contact Sender, which works for numbers, but not for the rest of the contact info...address..etc...
Contact Sender(premier) works however, I have to click a few extra things each time i want to send something...then choose the sms button to actually get it to send.
Also on (premier) I cant type a name to auto filter contacts, I have to manually scroll :/
Anyone else experiencing this?
Does anyone have any recommendations?
Thanks.
Hello everyone, I would like to start by saying thank you to everyone here, all of your posts, info, etc has been excellent in helping me along my way to learning enough about this stuff to be dangerous to mine & my friends phones...we're all still using them so that's a "Win" in my book
Now, on to my problem. I've tried googling & searching posts here, and I don't know if it's just the terminology I've searched but I've found nothing similar to my problem except where a thread had to do with EMBS messages coming through incorrectly.
First off, I'm on a Sprint Branded Samsung Epic Touch 4g Galaxy S II (whew that's a mouthful already) It is on Verizon Prepaid Service.
When I first set this phone up, everything worked correctly - Talk, Text, Web, MMS, WiFi Hotspot, Etc - all working perfectly. I was able to send & receive picture mail through MMS, etc.
I am currently running CyanogenMod 9-20120416-SNAPSHOT-epic4gtouch-Alpha 3
Android Ver 4.04
Kernel Ver 3.0.15-SPH-D710.FD10-CL377892
This is the updates I installed to this phone originally:
gapps-ics-20120429-signed
StockCWM-EL26.tar.md5
update-cm-9-20120416-SNAPSHOT-epic4gtouch-alpha3-signed
mmsfix.zip (and made the correct changes for Verizon)
As I said, the phone was 100% functioning at this point for several days. The problem that came up happened out of nowhere, no changes were made to the phone whatsoever, not even a random app was installed from the market.
The only apps I have installed are
Wifi Tether (Rooted Users)
ES File Explorer
Facebook
GMail
Craigslist
Facebook Contact Sync
NFL Scoreboard
QR Droid
SuperUser
Rom Toolbox
Rom Manager
Terminal Emulator
Other than that, it's just what ICS & GApps Installed.
So here's the problem - whenever I recieve a text from anyone now, if it comes in multiple texts (ie 1/2, 2/2/ etc) it shows up as all special characters when I recieve it.
Here is the last one I got, I sent it from another phone on the same carrier - I just typed myself a message until I was sure it would be a 2 part message and this is what came through on my Epic
First Msg
ß<xp¿AcGÉ?üööysgOS&Læ;6lX9W/Ü<9rfEØΨ+FøÆ8xp¿A¥ìÅß<xqF<9$fÅz<EEggÜNixw¿
5¥rdåÆΩÖÅΠ'ålÄ3gF
3vø)rlyscW/Ü>ñzsbEKΨ/ÜÆ_gGEìgVLhurd1äñ2AÅZ#ΛC<z¡@@@@@@@
Second Msg
Ü=ävhPfOÉ?N3vlY1cnÖ<yreIΨ/Ü<9rfEØC¥ìÅÆ8xpaCì
Λ(XΔA$éZTGøΔHEwì/ÖrsOà#Ec=P
I put it in a hex/text converter and the text version came up all "?'s" so I'm pretty much at a loss at this point.
I apologize for a long winded message, but I wanted to include as much information about my phone, etc as possible to get the best answer I could.
Again, thank you all and if anyone has any insight to what might be causing this, I would greatly appreciate the info.
Oh, and in case I didn't make it clear - at this moment, text works fine (if its only 1 text at a time incoming) I can send multiple page texts & the recipient gets them no problem, and I can send/recieve pictures, etc as mms with no problems...the problem only exists if it's multiple pages of text coming in at once.
Thanks
What happens if you use a 3rd party messaging app like handcent?
someguyatx said:
What happens if you use a 3rd party messaging app like handcent?
Click to expand...
Click to collapse
I just tried a few diff versions of Handcent, with the settings Default, then again with the settings on "Default SMS/MMS App (Disables Stock & Other Messaging Apps) and got the same results...
The wierd character code that comes through is exactly the same, both with the stock app & handcent in case that might be a question...
**Update**
I have Google Voice number sending voicemail converted as text to my phone on a secondary number. I got one today, was 3 pages SMS and it came through perfectly, right after that, I got a reg text from someone elses phone that was 2 pages, and it was the same type characters, and a few more since that were all the same special characters.
I've tested the Google Voice translation a few more times, and it comes through perfectly. I also tested just sending a multi-page text to my google voice number, which just forwarded the texts to my phone via SMS and they also come through perfectly.
So SMS from Google Voice in multiple texts works great, but from another phone do not.
If anyone has seen anything like this, I would love to know I'm not alone.
I'm having this exact same problem too. I noticed multiple texts incoming from certain people are fine, but when I receive multiple texts from a few others or a group sms from an iphone I get this really wonky characters. Any help would be appreciated. I am using this phone through pageplus.
Hi
I just got my G Pro and Im loving it except for one thing. Google Apps wont send me push notifications. I have tried all configurations but no luck. The only way I see new email or Voice messages is to manually open the apps and refresh. Can anybody help please?
Thanks
if anybody is interested, I discovered this only happens on wifi. As soon as I turn off wifi all emails and texts come in.
Ever since I have had this LG G3, it seems for no reason at all, at times, it will sit there and spin saying "sending" when I send a text. Happens sometimes when sending email as well using LG's built-in email. Tried rebooting, turning on or off wifi, have a good LTE connection at the time, but no dice. Just sits and spins saying sending. And usually eventually fails sending. Other times it sends immediately. I never know if I hit send if the SMS is going to be sent or not. It's quite frustrating. My wife and I are on the same provider (Rogers) and when this happens with my phone, I grab her Note 4, try sending out a text and boom, instantly sent.
I'm running stock 5.0.1. Two mods, CTT and Trickster. I have checked APN's and they are identical to my wife's Note 4.
Does anyone have any idea what else I could try to make the SMS and email sending more reliable?
Another strange thing. The stock messaging app doesn't show any messages. I have deleted them all. I installed Textra to see if sending messages was any better and there are about 10 voice mail message texts sitting in there. These are the notification I get when I get a voice mail. I had called Rogers before and asked if I could turn these redundant text messages off and they said I didn't have that option set on my account?? Not sure where they are coming from then. I do get the voice mail icon notification as well when I get a voice mail.
I deleted all of the messages, closed Textra and reopened, only to find all the texts had returned. WTF? I deleted them again, same thing. Tried cleaning cache and data for both the stock messaging app as well as Textra, same problem. Perhaps these messages are interfering some how with sending/receiving texts? I changed my phone number on this phone recently as I was getting a bunch of non-wanted calls and thus all these voice mails. Could these be left over from the previous number? Not sure why I can't delete them permanently. Man, what a pain.