Related
is there a solution to this yet I have been doing motos for a few years noiw and recently moved up to pda smartphones anyway I am in dier need of a imei change solution for the dash/s620/excalibur even if it is a pay service please provide me with a link i have been searching up and down
http://forum.xda-developers.com/showthread.php?t=276851
i read that already actually i also saw the htc imei changer which does not work for the excalibur and i am well aare of the reprocussion (pardon my spelling) for changing an esn does anybody know where the imei is stored on these phones maybe in the registry any help for this issue as i said i am new to this whole pda phone thing and i am very adaptable thnks for your help
Based on my previous reading this would not be the case but, if IMEI's were the unique part in unlock Dash's this could provide a way to unlock them for free (with one known code).
did the imei check unlock already my phone is cid unlocked software unlocked and reflashed wih htc excalibur stable rom iwizard will not work with excalibur and yet there seems to not yet be a imei changer soluion for this phone there is someone however that knows the tasks that iwizard runs is this not somehow able to be ported to the excalibur i have found a pay service that supports g4 chips but excalibur is not listed so i dont not want to try it also still searching for the location of the imei and a way to access that location
Hi!
Does anyone know where to find ROMS for HKC G1000 (DUAL SIM WM6)?
Many thanks!
i have one. they sent it to me coz i complained about noise being picked up by phone1. tried reflashing, but still the same problem.
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
THOMYROS said:
Hi I have a HKC G1000, and do not do as a HARD RESET, as you know, thanks
Click to expand...
Click to collapse
There is Icon with green tree in Settings menu - search for it!
Hkc G1000 hard reset
Hi,
i have the same problem, i have installed a program now the phone is blocked in the windows boot up screen.
Did you solve the problem?
Could you help me please?
Thanks
try this
3 key press together for re-start:
G2 (Dial sim card 2 key) + Camera key (on the right side, near the on/off key) + on/off key.
9rinder said:
I've got the last (november 2008) English ROM for HKC G1000 when been in ShenZhen month ago. If you need - I can upload it somewhere.
Click to expand...
Click to collapse
hi, can i have it? please provide a link for download. thanks... hopefully it will solve my noise problem on phone 1. thanks...
can you post your rom versions?
mine is Under Device Information: WM6_HKC_G1000_VER_07
Hkc G1000
Thank you very much Pranix,
it worked ,
but only after take off the battery for 15 min. and with G1 button at place of G2.
I'm also interested to have the Rom (just in case
If you can provide a link it will be much appreciated.
mine is:
ROM: WM6_HKC_G1000_VER_07
RADIO: PPC_DMDC_RIL_01.01
PROTOCOL: W8.5P8.4
DRAGONFLY: DV17-MODULE-VER-07.12.2
Just a curiosity: this pda it supposed to have 64 Mb of ram, but on "about" i read only 43,74 Mb,
it's your the same or not?
Thanks again
we have the same version.
http://uploading.com/files/G05UZJ16/HKC G1000.rar.html
hopefully someone here can modify and update it to wm 6.1
how's the sound quality of your phone?
i have a problem with phone 1, it picks up alot of ambience noise.
difficult to hear the other person you're talking to.
if you put your hand over the mouthpiece, and also the earpiece, it creates a feedback sound.
no problem on phone 2.
Hkc G1000
Hi Pranix,
thanks for the rom file after i'll ask you how to flash it.
My phone works good both sims, your, sounds to be an hardware
problem, since you told that you have flashed the rom.
The set of the microphone for the sim 1 is too sensible, and when you put the hand on the micro, it cause what is called "larsen effectc", that happend when the sensibility of the microphone is too high and trigger a feedback from the earphone that cause an annoying whistle .
In an italian forum, I heard about an engineering code to write down in the
china phones with WM6, that allow you to set some hardware features
of the phone including the sound level, I don't know if this is possible also with our phone. but it worth a try.
I'll go to ask in the forum and if pertinent, i'll post you the answer.
Bye
hi,
the procedure to flash is in the rar file that i have uploaded.
just open the text file.
hope you can find some way to minimize the sensitivity of microphone setting for phone 1.
regards,
pranix
Hi Pranix,
he say that the code "engineer mode" it is available only on the china phones with the RTOS operating system, and in some motorola and Nokias,
but he say that maybe it is possible to change the parameters set on the windows registry, with a pc program like CeRegEditor.
Connect the phone to the pc, start CeRegEditor, make it read the registry, click on unlock (if not you can't save the changes), after that you have to look where are located the keys regarding the audio, and see if modifiyng the key value you can solve the problem.
I will look further if i find some else solution
good luck
i already tried editing registry however still the same.
maybe i was editing the wrong registry. hehe
i just hope that 9rinder gets to post his rom here
Pranix said:
i just hope that 9rinder gets to post his rom here
Click to expand...
Click to collapse
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
9rinder said:
Here is link, try it, guys:
http://rapidshare.com/files/195288870/HKC.ZIP.html
Click to expand...
Click to collapse
hi,
can you post your rom details?
i downloaded the rom, it seems your rom & my rom are the same.
i checked the date & time stamp, its identical.
i also asked my contact at hkc, still no new rom since i asked for it sometime june.
how's the audio quality on your phone 1 & phone 2?
can you hear the calling party clearly?
oxyjo said:
Hi Pranix,
take a look here, maybe help:
http://forum.xda-developers.com/showthread.php?t=256734
then search on the registry with the keyword "volume"
Click to expand...
Click to collapse
i've actually tried editing those registries before however still the same.
the question here is that do we have one or two mircrophones?
coz if only one, then there must be a setting somewhere to adjust phone 1 & phone 2. phone 2 sound is better than phone 1.
if two microphones, i cant find the settings as there is only one setting to tweak.
Hello. I have one of this PDa.
Mine has this ROM:
ROM version:WM6_SITRONICS_SD106_VER_05
Radio version: CYNTHIA850_DMDC_RIL_01.01
Protocol version: W8.5P8.4
Dragonfly Version:CYNTHIA850 TF-DV17-MODULE-VER-07.16 Feb 18 2008 13:02:06
Do you recommend me to update?
Is any way to "extract" its original ROM?
And is any way to "edit" any of your roms to change the language of the OS?
Thanks
Hello,
I hope it's not an absolutely newbee-question ...
I just installed my first "not-official" ROM on my P535 smartphone:
P535-WM6.1-MANILLA 2D-BLACK VERSION BUILD 19974.1.2.8 WWE(PVA9)ROM6.1_BUILD19974_BLACK_VERSION.zip
I'm pretty impressed by the new features but unfortunately I ran into one problem: After I flashed the new ROM I tried to install my navigation software "Navigon Navigator", but without success. The "device id" of my Asus changed and therefore my activation key for the navigation software is not valid any more.
Does anyone know how this unique device id is generated? Will a downgrade back to the original ROM solve my issues? Or any other hints?
Regards,
ChrischMan
You should try another rom.
Hi,
I tried another but unfortunately get the same but new unique id.
Regards,
ChrischMan
Nobody with the same problem or some deeper knowledge concering this **** unique id?
Regards, ChrischMan
U can try adding in the Owner's information. Some programs uses this to generate the key.
For all new pro2 users i made a cab for the FM radio found on the first OEM Rhodium posted on the forum.
Update - When i receive my device i'll continue to try and see if the radio is there or not.
thank you
Unfortuntly returns "The file FMRadio cannot be opened. Either it is not signed with a trusted certificate, or one of its component not found. If the problem persists, try reinstalling or restoring this file."
Am willing to try other thing but i will say am very impressed so far how quick it's working and the fact battery came nearly fully charged
try the new link
Also install the sdkcerts.cab. i'll attach
still no luck i'm afraid
same error ??? did you install sdkcerts and reboot ???
just tried again maybe someone else can try currently i'm having to download via a slightly suspect link until later and at my home computer
Hi
Installed certs, then radio, then soft reset ...
When you run FMRadio you get the message that FMRadio.exe - the file 'FMRadio' cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file.
i.e. what the other person experienced.
Would be nice to see this enabled if possible.
Paul.
guys, try it again !! IT should at least open !!!! and i'm hopping it works
Sometimes error messages are off topic
It might be failing to find the missing hardware component and just giving a general error implying a software component
i need feedback from my last update :S
try and execute fmradio.exe from windows folder !!!
Why should the fm radio be missing ???
http://www.htc.com/nl/product/touchpro2/specification.html
sorry for the dutch .... at the bottom it says "special funtions .... FM RADIO - G sensor" .
dgh said:
Why should the fm radio be missing ???
http://www.htc.com/nl/product/touchpro2/specification.html
sorry for the dutch .... at the bottom it says "special funtions .... FM RADIO - G sensor" .
Click to expand...
Click to collapse
It has been taken out already. Look here.
have double triple quadruple checked still no worky with the files above. I'm NOT willing to crack it open to look but software wise i'll give most things a go but i highly suspect it's a no go so internet radio it is for me when i want it
You need to sign any exe's or dlls that you're installing for the FM Radio. I don't have it right now to upload, but there is a certificate signer program that will allow you to run those files
Also, make sure that you have removed the application lock in the registry or it will not allow you to run unsigned programs.
my main problem is that i do not have my pro 2 to test it, so i'm a litle blind here !!!
i have the signer
So is the FM radio hardware there, just not enabled then?
Yes, that's the most likely case. And it may be that HTC enables the FM radio in a future ROM update, just like AT&T did with its most recent touch pro upgrade. However, we should already have proper drivers/software from other devices with identical hardware (i.e. blackstone, raphael, etc.), so why not give it a go and put the "developers" in XDA-Developers, and get our FM radio back!
Dave
DaveTheTytnIIGuy said:
Yes, that's the most likely case. And it may be that HTC enables the FM radio in a future ROM update, just like AT&T did with its most recent touch pro upgrade. However, we should already have proper drivers/software from other devices with identical hardware (i.e. blackstone, raphael, etc.), so why not give it a go and put the "developers" in XDA-Developers, and get our FM radio back!
Dave
Click to expand...
Click to collapse
Well, if the PCB module is there AND the antenna that would be great!
Yes why would they keep the hardware and not enable it. They probably removed the hardware to save cost. Unless the antenna is a track laid out on the PCB.
I prefer pay a little bit more to have the FM HW component (not expensive component)... crazy HTC change...
Hi!
I find this web site with flash and rom for x18i:
translate.googleusercontent.c...WmzgU6W-gvPo9g
And other with flashtools to MT6573:
china-gsm.ru/2011/11/22/flash-tool.html
forum with a lot information x18i:
translate.google.com/translate?hl=en&sl=zh-CN&tl=es&u=http%3A%2F%2Fproducts.mobileuncle.com%2Findex.php%3Fgid%3D32
I don´t test any aplicattion. If somebody try to test it, please post it.
Happy Christmas!!
framework damaged on Star X18i
hello,
I damaged the folder framework of this phone and I can not start it.
Is freezing on the blue android honeycomb screen.
I'm trying to install the new Android 2.3.4 firmware but I can not connect to SP Flash Tool.
How do I? The program does not recognize it. Help me please!
Sorry, but in this moment I can´t help you because i don´t have the knowledge required for it.
I see you on other forum. Now, I have collecting information of X18i. Is difficult, because the phone is new and only find chinese information.
Information gathered will pass it for you.
1- Explain me: What have you done to break the framework?
2- I want to install other rom. The last version of Whatsapp don´t run.Do you know to install other rom?
Merry Crhistmas!
I did flash the phone but now will not start. Turns on but nothing appears on screen.
I need the complete rom for this phone, but I can not find on the net.
: (
Factory ROM
I deleted some system files — rooted. Now I have 'android.process.acore' when I try to see my contacts.
I need to reinstall the factory ROM.
Can anyone pack and send me a link of the X18i's ROM?
hp/w ww.medi afire.com/?k5hrll515rrntrh
It s a cooked Rom, from vnese community, chínese things free. Hope it helps
Nhà quê 2 said:
hp/w ww.medi afire.com/?k5hrll515rrntrh
It s a cooked Rom, from vnese community, chínese things free. Hope it helps
Click to expand...
Click to collapse
How to flash that ROM? Please......
Jazalogo said:
I deleted some system files — rooted. Now I have 'android.process.acore' when I try to see my contacts.
I need to reinstall the factory ROM.
Can anyone pack and send me a link of the X18i's ROM?
Click to expand...
Click to collapse
how u rooted this android?
New rom
Is there any new rom for Star X18i? I saw 2.3.7 rom in a Chinese website but I couldn't sign up.
bulentcandan said:
Is there any new rom for Star X18i? I saw 2.3.7 rom in a Chinese website but I couldn't sign up.
Click to expand...
Click to collapse
Hi !!!
Have you rooted you star x18i ??
can help me because I dont find info about
Thanks
Star X18i Cam & flashlight Problem
Here i am finding some thing about Star X18i Camera, Screen and flashlight problem..
Just a little trick for those who are worried about Blank Screen, Or Camera Problem, Or Flash light Problem.
Many complain that after flashing the phone "fall off" the camera (front or rear), the display is not working properly (does not show anything, skewed, wrong brightness, wrong color and so on). The fact is that the manufacturer of the device changes over time. In different batches of devices can be set to the same array of cameras, different display controllers. To account for these situations in uboot firmware file made every possible driver (at the time of the release of firmware) for the cameras and display specific device. All you have to do - is to specify the correct sensors front and rear camera and a faithful display controller. Do not worry if you make a mistake in these parameters. Just ask one more time and options.
If both options are not suitable, then ... If the display is not working properly - Pick up the correct display of the controller are available for selection. If not working the front or rear camera (or both), pick the correct sensor for the camera. Of the camera is easy to check by running a standard Camera program.
OPEN uboot file in any hex editor and find these lines..
AGOLD$LCM$DRV
Here put your Display driver name i.e (truly3p2049$R) without braces.
And then find this line.
AGOLD$CAM$DRV hi253yuv hi704yuv NONE
Replace hi253yuv with ov3660yuv and do not edit anything else.
---------------------------------------------------------------------------------------------
After specifying all the data for the cameras and the display controller save and close the program.
Open the program SP Flash Tool.
Push the button Scatter-loading and select the file Android_scatter.txt (he is in the folder with the firmware).
Remove all ticks except uboot and Flash this file..
\\Have a good luck :good:
babarali321 said:
Here i am finding some thing about Star X18i Camera, Screen and flashlight problem..
Just a little trick for those who are worried about Blank Screen, Or Camera Problem, Or Flash light Problem.
Many complain that after flashing the phone "fall off" the camera (front or rear), the display is not working properly (does not show anything, skewed, wrong brightness, wrong color and so on). The fact is that the manufacturer of the device changes over time. In different batches of devices can be set to the same array of cameras, different display controllers. To account for these situations in uboot firmware file made every possible driver (at the time of the release of firmware) for the cameras and display specific device. All you have to do - is to specify the correct sensors front and rear camera and a faithful display controller. Do not worry if you make a mistake in these parameters. Just ask one more time and options.
If both options are not suitable, then ... If the display is not working properly - Pick up the correct display of the controller are available for selection. If not working the front or rear camera (or both), pick the correct sensor for the camera. Of the camera is easy to check by running a standard Camera program.
OPEN uboot file in any hex editor and find these lines..
AGOLD$LCM$DRV
Here put your Display driver name i.e (truly3p2049$R) without braces.
And then find this line.
AGOLD$CAM$DRV hi253yuv hi704yuv NONE
Replace hi253yuv with ov3660yuv and do not edit anything else.
---------------------------------------------------------------------------------------------
After specifying all the data for the cameras and the display controller save and close the program.
Open the program SP Flash Tool.
Push the button Scatter-loading and select the file Android_scatter.txt (he is in the folder with the firmware).
Remove all ticks except uboot and Flash this file..
\\Have a good luck :good:
Click to expand...
Click to collapse
Hi Friend
There is anyway i can check wich driver my camera uses? both front and back camera and flash are not working.
I tried ov3660yuv with no sucess.
Thanks