Related
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Nobody answers? Please can anybody help me?
ddqgarces said:
I need help please, because I can't get my new prestigio 4500T turn on.
I first did the CWM recovery in this site, androidforum.cz/pro-pap4500t-dc-1-2ghz-s-jb-4-1-1-t38976.html
and it was all ok.
But then I wanted to remove the CWM recovery of my phone, because I had some problem updating my phone to the new rom because of it,
and I went to the same program I installed CWM recovery, Smart Phone Flash Tool, and I put the same scatter file I used to install, and instead of clicking on download I clicked Format, and then format whole flash, because it was there that I would take CWM recovery of my phone.
Now I can't turn my phone on, when I connect usb at pc, it connects and disconnects a lot of times. I even tried to do the same steps to download the CWM recovery on my phone but in SP Flash Tool I get this error: BROM ERROR: S_DL_GET_DRAM_SETTING_FAIL (5054)
[HINT]: Please check your load matches to your target which is to be downloaded.
I don't know what to do and please Help me. Thanks
Click to expand...
Click to collapse
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
jaskooo said:
You messed up boot file.Try to find original boot.img here on XDA and try to flash it via PC,or find original stock rom for flashing via SPFlashTool try that
Click to expand...
Click to collapse
Thanks for your help, I have a boot.img of the stock rom, I put in the same folder of MT6577_Android_scatter_emmc and CheckSum.ini , but when I try to download via SP flash tool I get this error:
Image Bootimg checksum failed! Checksum reference value (0x5583) in the config.ini file.
Please re-fill correct checksum values in checksum.ini.
I don't know what are the checksum values, can you tell me where i can find these values?
I am getting this DRAM error, because I don't have the correct files to flash in SP flash tool.
Please can you give me all those files needed to put a whole new firmware in y phone, I need the preloader file, and etc.
My phone can't detect preloader, as it did, and I can't boot it, it's like dead, only appears a red light when I connect to pc and a MTk USB Port (COM).
Please help me with the files needed to flash my whole phone in sp flash tool
Need full ROM with scatter file
Hi Guys, I am looking for full ROM including scatter file for PAP4500T. I need it to load all needed (Preloader, MBR, EBR1, UBOOT, BOOTIMG, RECOVERY, SEC_RO, LOGO, EBR2, ANDROID, CACHE, USRDATA) in to the SP Flash Tool. It can be from Stock or any working ROM. If You could provide me Working ROM with all these and with scatter file which will load everithink to the SPflashTool I would really appreciate that.
Thank You in advance.
This is viewable as a Evernote link with clickable links, and easier text.
https://www.evernote.com/shard/s372/nl/65123625/8cbdf422-6334-4a18-86d3-b0ac271d6987?title=Fix%20Phone
Note- this is a ID-10 error from not correctly folling the steps of Bump
from this tutorial
http://forum.xda-developers.com/lg-...mp-unlock-lg-g3-twrp-d852-d852g-f400-t2900614
I should not have used Flashify to flash
twrp-2.8.0.0_d850-signed.img from
http://downloads.codefi.re/thecubed/lg_g3/bump/
as boot This let's me load TWRP {which was not installed before}
this caused the Operating system to vanish.
the phone boots directly into TWRP
phone details
http://www.att.com/cellphones/lg/g3.html
AT&T LG G3 Stock
Rooted with Stump {this worked and i went many moons rooted Thanks guys!}
AT &T D850 AATT D85010D 00_3 2014/07/04
{details from http://www.mylgphones.com/lg-g3-firmware-checking-the-software-version-and-update-history }
i am on a linux computer
ADB was installed by following this guide
http://forum.xda-developers.com/showthread.php?t=1907796
Adb works, and recognizes phone.
Step 7. Create path for ADB
did not work.
all commands require ./
I have downloaded the stock version
BIN_LGD850AT-01-V10d-310-410-JUN-19-2014-0.zip
from
http://downloadandroidfiles.org/directory.php?Directory=/LG G3/Stock Files/ATT D850
it is sitting in Downloads of computer.
I turned phone OFF at 98% battery.
it has no backup.
so, my question How do i get the phone back to stock?
i think I could pull the recovery downloaded onto SD card, flash it and be golden. However I would like some
input before my phone goes kaput.
so how about it guys? what should I do?
More prep
I found this guide for Windows
http://forum.xda-developers.com/showthread.php?t=2772199
These firmware files
http://downloads.codefi.re/wolfgart/LG_G3/D850
and downloaded
BIN_LGD850AT-01-V10d-310-410-JUN-19-2014-0.zip
BIN_LGD850AT-01-V10d-310-410-JUN-19-2014-0.zip
D850_SVC_ENG_V0.9_140707.pdf
I flashed twrp through flashify on my d850 and it worked fine
2SHAYNEZ
Hey guys,
I'm in the process of flashing CM's Marshmallow onto my LG G3s (D722) however after successfully rooting using KingRoot I can't seem to be able to apply the necessary bootloader patch as the /dev/block folders and contents are completely missing. Anyone have any suggestions? I installed a kdz lollipop stock room to begin the process if it helps.
heyy
you can you help me?
I have the CM13 but the root was not well and using the kingroot but is dont working .
as you did with the kingroot ?
sorry for the inconvenient
Hey,
I flashed a stock ROM (make sure you download the right one for your model/IMEI) via LG Flash Tool and then used Kingroot, be sure you haven't downloaded KingoRoot by mistake, it's not the same app as it just installs a heap of apps on your phone and does nothing but tell you it's failed after.
I'm still stuck with the bootloader patch though :s
There is a thread with all the info about this phone, tells you the right way to patch boot
Hi,
I figured out what the problem was, the thread you mention doesn't cater for my specific issue. Which I had hoped for a response about, however incase others have this same issue I'll list the process I went through here to resolve my issue and correctly root, patch and flash the D722;
1: Install Kingroot on your phone with your data connection active and let it try to root your phone, if it fails proceed to the next steps. Otherwise skip to step 3
THINGS TO DOWNLOAD: (If initial root attempt fails)
Download & install LG Flash tool on your PC.
Download & install Unified Android Toolkit (Optional, but useful for mass installation of aps)
Search for the correct KDZ file for your phone model/IMEI HERE
Install Busybox on your phone
Install Flashify on your phone
2: With your phone in download mode Flash your downloaded ROM using the LG Flash tool in CSE mode and click start, ignore language settings and any error messages. It should proceed as normal.
3: Follow the instructions for patching the bootloader HERE. If it fails proceed to step 4.
NOTE: The root location of your external SD card may be in a different directory, for example like mine it was in /storage/external_SD/ so try to change the file location in the command before proceeding.
4: Download and install CWM ROM Manager on your device (use Unified Android Toolkit to do this if you don't have/want gapps). Then choose fix permissions and repeat step 3.
5: Flash twrp via Flashify.
6: Download your desired ROM and place it in the root of your SD card, reboot to recovery.
7: Install the ROM as usual via TWRP, remember to wipe dalvic etc.
If mods would like me to post this as a guide instead I'll gladly do so!
NarcissusFarie said:
Hi,
I figured out what the problem was, the thread you mention doesn't cater for my specific issue. Which I had hoped for a response about, however incase others have this same issue I'll list the process I went through here to resolve my issue and correctly root, patch and flash the D722;
1: Install Kingroot on your phone with your data connection active and let it try to root your phone, if it fails proceed to the next steps. Otherwise skip to step 3
THINGS TO DOWNLOAD: (If initial root attempt fails)
Download & install LG Flash tool on your PC.
Download & install Unified Android Toolkit (Optional, but useful for mass installation of aps)
Search for the correct KDZ file for your phone model/IMEI HERE
Install Busybox on your phone
Install Flashify on your phone
2: With your phone in download mode Flash your downloaded ROM using the LG Flash tool in CSE mode and click start, ignore language settings and any error messages. It should proceed as normal.
3: Follow the instructions for patching the bootloader HERE. If it fails proceed to step 4.
NOTE: The root location of your external SD card may be in a different directory, for example like mine it was in /storage/external_SD/ so try to change the file location in the command before proceeding.
4: Download and install CWM ROM Manager on your device (use Unified Android Toolkit to do this if you don't have/want gapps). Then choose fix permissions and repeat step 3.
5: Flash twrp via Flashify.
6: Download your desired ROM and place it in the root of your SD card, reboot to recovery.
7: Install the ROM as usual via TWRP, remember to wipe dalvic etc.
If mods would like me to post this as a guide instead I'll gladly do so!
Click to expand...
Click to collapse
help me please. i cant patch bootloader says sdcard/aboot.bin: no such file or directory, i have the file on internal and external memory... please help.....
feikacab said:
help me please. i cant patch bootloader says sdcard/aboot.bin: no such file or directory, i have the file on internal and external memory... please help.....
Click to expand...
Click to collapse
Some versions have another path.
Sent from my D722P using XDA-Developers mobile app
ErnuB said:
Some versions have another path.
Sent from my D722P using XDA-Developers mobile app
Click to expand...
Click to collapse
yes. works fine. thanks dude.
Could you tell me the path I should use? or the full code I should write?
NarcissusFarie said:
Hi,
I figured out what the problem was, the thread you mention doesn't cater for my specific issue. Which I had hoped for a response about, however incase others have this same issue I'll list the process I went through here to resolve my issue and correctly root, patch and flash the D722;
1: Install Kingroot on your phone with your data connection active and let it try to root your phone, if it fails proceed to the next steps. Otherwise skip to step 3
THINGS TO DOWNLOAD: (If initial root attempt fails)
Download & install LG Flash tool on your PC.
Download & install Unified Android Toolkit (Optional, but useful for mass installation of aps)
Search for the correct KDZ file for your phone model/IMEI HERE
Install Busybox on your phone
Install Flashify on your phone
2: With your phone in download mode Flash your downloaded ROM using the LG Flash tool in CSE mode and click start, ignore language settings and any error messages. It should proceed as normal.
3: Follow the instructions for patching the bootloader HERE. If it fails proceed to step 4.
NOTE: The root location of your external SD card may be in a different directory, for example like mine it was in /storage/external_SD/ so try to change the file location in the command before proceeding.
4: Download and install CWM ROM Manager on your device (use Unified Android Toolkit to do this if you don't have/want gapps). Then choose fix permissions and repeat step 3.
5: Flash twrp via Flashify.
6: Download your desired ROM and place it in the root of your SD card, reboot to recovery.
7: Install the ROM as usual via TWRP, remember to wipe dalvic etc.
If mods would like me to post this as a guide instead I'll gladly do so!
Click to expand...
Click to collapse
Is this guide still works or will you update instructions? also where can I download TWRP and LineageOS for LG G3s D722?
Hi all, first time working with Samsung devices, so got noob question, please bear with me.
I'm currently on 4.2.2 stock.
How to:
1. Download ODIN 3.10.7 on a Windows OS
2. Choose your device package and flash it via ODIN :
https://www.androidfilehost.com/?w=files&flid=54013
3. Flash TWRP 3.0 recovery from ODIN or older version of TWRP :
https://www.androidfilehost.com/?w=files&flid=31895
Click to expand...
Click to collapse
I read from some searching that both device baseband package (from [2]) and TWRP (from [3]) is to be flashed via the AP section of ODIN.
My question is, if I would like to perform a backup of my current stock, can I just flash [2] and [3], then boot into recovery to do nandroid backup?
Will flashing [2] and [3] prevent the stock backup from booting afterwards, if I restore it?
no dont worry .flashing recovery just changes your current recovery into twrp. the second package is needed to be flashed in order that cm13 recognizes sim and baseband wont be unknown any more.
after flashing thise two you'll be able to work with your phone like before and yes you can get a nandroid backup of your current rom until you haven't wiped.
@darknessd31 thank you so much. I managed to get it to work.
Now I got one more problem - files as small as 7mb will give this error when opened:
"The file is too big to be open inside this device."
Click to expand...
Click to collapse
give some more information what format is it, what application do yo try to open the file with,is the file on sdcard?
Hi @vemoxy,
I'm facing the same error message ("The file is too big to be open inside this device") on an LG G3. Did you manage to find a solution to this?
Thanks!
danielmurphy said:
Hi @vemoxy,
I'm facing the same error message ("The file is too big to be open inside this device") on an LG G3. Did you manage to find a solution to this?
Thanks!
Click to expand...
Click to collapse
My Note 8 bricked, but if I remember correctly, restarting did the trick for me.
Guys: I need your understanding, experience, patience and HEEELP!!!
The history:
2 months ago, I bought a new HUAWEI GR3 (TANGO) TAG-L23. Processor = MT6753T
I tried to root it using KingoRoot. I Messed it up... Got a soft-brick: splash screen boot loop. At that moment, I still had access to Fastboot and Recovery mode (stock recovery).
After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3.
I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm.
Tired of searching a stock/custom firmware for GR3 TAG-L23, I decided to download and flash a GR3 TAG-L22 rom using TWRP.
Result = Messed it up again... this time worst... Hard-bricked I think: the phone didn't show any light, couldn't boot it again in any mode... Dead...
The only hope I had is that it is detected by Windows for about 10 seconds as MEDIATEK USB PORT (COMxx) where xx changes when I connect it from one USB port to another.
Since then, I tried almost every tutorial/video/solution/forum/website over the internet, tried almost every SP Flash tool version from v3.1224 to v5.1628, downloaded every scatter.txt for MT6753 processor, tried changing with/without battery option in SPFT, pressing every phone buttons combos, with no luck...
I always get the same error: S_FT_ENABLE_DRAM_FAIL (0xFC0)
Downloaded and installed almost every driver I found on internet: not overwritting them... I created a Virtual Machine, and test them separately using snapshots. Result = Same DRAM_FAIL error.
last week, got another HUAWEI GR3 TAG-L23, untouched, brand new...
I did the following with the new one:
Flashed TWRP recovery using fastboot commands = OK
Rooted it using SuperSU = OK
executed tons of ADB commands that found over the internet, to dump the partition table and stock rom using dd command = OK (I think... what I got is a bunch of files - system, lk, boot, logo, cache, frp, userdata, secro, recovery, nvdata, protect1 and 2, tee1 and 2, and so on).
Using the partition table information, edited one scatter.txt file for MT6753 and, one by one, adjusted the partition info (start and lenght). I did it because when using any downloaded scatter file, and selecting the files that I got from dd commands, SPFT showed error messages saying them were wrong. After editing it and loading the files that I got from the second phone, SPFT recognized them as good ones.
But.... I'm still getting the d...mn S_FT_ENABLE_DRAM_FAIL (0xFC0) error
Also tried to get a rom backup and scatter file from the second phone using MTK DROID ROOT & TOOLS v2.5.3 with no luck: it shows all phone information (except IMEIs), a green rectangle shows up, but... a weird message appears at right: "ERROR: TotalBytesPerChunk Not Found. Set Default Page/Spare=2048/64 !!!". Then I click on "BLOCKS MAP" button, a new window appears showing the partition info (that already got using adb command prompt) and "create scatter file" button is grayed out... And if I try to perform the backup, it starts fine, but ends with error, and no file is backed up...
Let me mention that I already read and googled the totalbytesperchunk error and the grayed out button stuff and tried all alternatives too, and nothing worked.
My work environment:
PC = Laptop With 8 GB RAM / Windows 10 pro x64
Virtual Machines: Windows 7 pro 32 bits, Windows XP 32 bits, Ubuntu 32 and 64 bits...
What else can I do?
How can I use the second, rooted and working phone to get a rom/firmware working dump? it is possible?
If someone decides to help me, let me know what do you need (dumped files, downloaded scatter.txt files, screenshots, whatever you need...)
COM## is a COM port. You can use a terminal program to directly interact with the device.
You are not completely bricked yet.
I do not have any further details to help you, but I can tell you there is still hope.
Connect the dead device to PC, load up a terminal app (if on windows, just load up the app named Terminal)
See where you can get with that.
good luck
Please Help cesarr4: my TAG-L23 bricked - Need your TWRP
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.
antonioroa said:
I have a bricked GR3 after using Kingo Root. You mention in the post:
"After tons of days googling, found a TWRP recovery that someone claimed that worked in GR3. I decided to flash it using fastboot commands from my PC. Result = OK. Flashed and worked like a charm."
Please share this TWRP recovery, please.
Click to expand...
Click to collapse
I attached the recovery I'm currently using in the second GR3. I'm still looking forward the stock rom and a way to recover the first one... have u found a way to unbrick it?
Here you can find the recovery too: http://forum.xda-developers.com/android/development/recovery-twrp-3-0-2-0-huawei-tag-l01-p8-t3433520
I have the same problem with kingroot, and cannot find TAG-L23 rom.
I sent my phone to huawei support and they said it's a board problem and need to replace, the cost is near to the phone's original price.... No way!
In clangsm web page there's a stock rom but you need to pay for vip membership.
Please help with this issue.
I'm still trying to get a working rom image from the 2nd GR3 that I bought... No luck yet... I'm plenty sure that there is no need to do hardware replacement... can anyone point me to a tool/step-by-step guide to readback and save a flashable rom image from GR3 phone, and a SP tools that works with GR3 chipset/PCB?
Hi, i have a TAG-L01 and i got the same problem, i've tried a lot with no lucky, it seems sp flash tool don't support our device(or is huawei that don't want).
If you have some ideas please tell me, i will help(our devices are exactly the same, all TAG-Lxx are the same)
Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.
srgg01 said:
Hello
I have a TAG-L23. I was able to install the TRWP recovery mentioned in previous posts. But I do need the Stock ROM, since I am not able to start the phone. It is allways rebooting. any idea where to find the ROM? maybe cesarr4 can do a backup on TWRP from his second phone and we can load it. just make a backup in the recovery and Zip it, then you may share it.
Click to expand...
Click to collapse
Done. Where can I share it for you?
cesarr4 said:
Done. Where can I share it for you?
Click to expand...
Click to collapse
please share your ROM in google drive. i've got same problem here.
Any link to the TAG-L23 ROM? please share as I believe mine is corrupted.