Anyone else having issues with this? Short story is im not getting DD+ through netflix/amazon, yet will get DTS/DD through xbmc.
Im having issues with dolby digital plus and my fire tv. I have a new LG home theater system BH9530TW. Ive set the firetv audio settings to play dolby digital plus over hdmi and have the firetv plugged into the receiver, the receiver is set to multi channel pcm. When ever i play a netflix or amazon prime movie with 5.1 i get no sound, i have to change it back to stereo for any sound. Ive tested xbmc and get DD and DTS through movies on that, i don't have any DD+ files to test that, im not sure if xbmc will passthrough DD+ anyway.
Taken from the specs of the receiver:
Audio - LPCM
Audio - Dolby Digital
Audio - Dolby Digital Plus
Audio - Dolby TrueHD
Audio - DTS
Audio - DTS-HD High Resolution Audio
Audio - DTS HD-Master Audio
Audio - MPEG 1/2 L2
Audio - MP3
Audio - Audio - ID3 Tag
Audio - MMA
Audio - AAC
Audio - FLAC
Strange, I can confirm that my Onkyo properly plays Dolby Digital + from Amazon and Netflix. I also have no trouble with DD or DTS via XBMC. My FireTV is connected the same way yours is, via HDMI straight to the receiver.
jeebuspwnz said:
Strange, I can confirm that my Onkyo properly plays Dolby Digital + from Amazon and Netflix. I also have no trouble with DD or DTS via XBMC. My FireTV is connected the same way yours is, via HDMI straight to the receiver.
Click to expand...
Click to collapse
Damn, i was hoping it was an issue with the firetv lol. Must be a receiver issue, hopefully a firmware update may resolve it in the future. I will test it with an optical cable and see if i can atleast get DD 5.1 out of it that way. The "virtual" surround it produces is extremely good however and i may stick to that yet.
Af tv optical dd
garvani said:
Damn, i was hoping it was an issue with the firetv lol. Must be a receiver issue, hopefully a firmware update may resolve it in the future. I will test it with an optical cable and see if i can atleast get DD 5.1 out of it that way. The "virtual" surround it produces is extremely good however and i may stick to that yet.
Click to expand...
Click to collapse
Is not your receiver, AFTV DD over optical doesn't work.
I have an LG 7540tw home theater and DD+ doesn't work for me too. What I did was set the dolby digital plus setting to Auto for the Fire TV, so now the receiver plays DD 5.1 which is downmixed from the DD+ 5.1 of Netflix thru HDMI, I don't have an optical cable connected from the fireTV to the receiver. There are others with this issue too, but I cant find the amazon forum's link anymore
DD+
I ran in to this with Netflix from a Roku3 via HDMI to a 54" Vizio 5.1 sound bar. All issues with DD+ involve whether or not something in line can decode it. Also, DD+ is HDMI only so Digital Coaxial or Optical won't work either. I came to FireTV as it will output DD via Optical which my soundbar will handle. The Vizio sound bar only is capable of DD and DTS. DD+ results in silence.
To do DD+ you need an AVR that decodes it.
BTW, I do not recommend the Vizio sound bar. It does do rear surround and sub-woofer via bluetooth which works well. The downside is that it has only one HDMI input and supports only DD and DTS. I bought it as I didn't want to drill my new house. By the time I paid $500 for it, $50 for an HDMI switch, and $100 for AFTV I would have been much better off buying a more capable traditional AVR system for much less money.
ars_92 said:
I have an LG 7540tw home theater and DD+ doesn't work for me too. What I did was set the dolby digital plus setting to Auto for the Fire TV, so now the receiver plays DD 5.1 which is downmixed from the DD+ 5.1 of Netflix thru HDMI, I don't have an optical cable connected from the fireTV to the receiver. There are others with this issue too, but I cant find the amazon forum's link anymore
Click to expand...
Click to collapse
I will have to give this a try, i would have thought i had already but possibly not. DD5.1 is adequate enough.
To clear things up i have the AFTV connected to the receiver via hdmi in, then receiver connected to my projector via hdmi out. I only mentioend optical as possible alternative.
schneid said:
To do DD+ you need an AVR that decodes it.
Click to expand...
Click to collapse
Its not that simple either as my AVR has support for DD+ but ends in silence as well. Theres something weird going on there, im glad im not the only one with the issue.
garvani said:
Its not that simple either as my AVR has support for DD+ but ends in silence as well. Theres something weird going on there, im glad im not the only one with the issue.
Click to expand...
Click to collapse
Have you tried another HDMI cable?
garvani said:
Its not that simple either as my AVR has support for DD+ but ends in silence as well. Theres something weird going on there, im glad im not the only one with the issue.
Click to expand...
Click to collapse
Maybe I'm missing something, but if you have your AVR set to multi channel PCM, doesn't that assume the FTV will do the decoding (which it can't). Shouldn't you be sending the DD+ as passthrough for the AVR to decode?
bruce7373 said:
Maybe I'm missing something, but if you have your AVR set to multi channel PCM, doesn't that assume the FTV will do the decoding (which it can't). Shouldn't you be sending the DD+ as passthrough for the AVR to decode?
Click to expand...
Click to collapse
I agree, FTV decodes nothing. An AVR of some sort that has paid the licensing fee must be in the mix. If the AVR is DD+ rated, I'd take a hard look at the HDMI cables. Don't have to be expensive but do need to be capable of handling the standard being pushed through them.
has anyone gotten karaoke mics to work with Firetv? would love to get it going if its possible to use it on firetv
mics i've tried:
singstar ps2
usb logitech
neither work and produce no sound from the mics while plugged into the usb port of firetv
or am i missing a step and need a mixer in between firetv and receiver? if anyone has set this up, would love to hear from you. thanks!
Are you able to play MP3+Gs using the Karaoke settings?
When I try to launch a MP3+G in XBMC on the Fire TV it crashes and takes me back to Amazons GUI. If you've got it working I am wondering which version of XBMC you are using on your AFTV.
For microphones, I was using a mixer with my HTPC and 2 XLR microphones. I ended up blowing my centre speaker this way, microphones and home theater speakers are not the best paired. Since migrating to AFTV, if I can get XBMC to play karaoke files I plan on getting a cheap PA speaker set (Mackie SRM150) and running the mics independant of my home theater which will just play the music with lyrics on the TV thus bypassing the AFTV for vocals all together.
Cheers
scorched03 said:
has anyone gotten karaoke mics to work with Firetv? would love to get it going if its possible to use it on firetv
mics i've tried:
singstar ps2
usb logitech
neither work and produce no sound from the mics while plugged into the usb port of firetv
or am i missing a step and need a mixer in between firetv and receiver? if anyone has set this up, would love to hear from you. thanks!
Click to expand...
Click to collapse
scorched03 said:
has anyone gotten karaoke mics to work with Firetv? would love to get it going if its possible to use it on firetv
mics i've tried:
singstar ps2
usb logitech
neither work and produce no sound from the mics while plugged into the usb port of firetv
or am i missing a step and need a mixer in between firetv and receiver? if anyone has set this up, would love to hear from you. thanks!
Click to expand...
Click to collapse
I see this thread went far. Anyone have any updates? I'll be checking my rockband mic from 360 in the next few days (moved and have to dig it out first)... presumably if you have the karaoke settings on it may just work?
If anyone knows about dual mic/usb hubs working with mics too that'd be sweet.
Otherwise I'll invest in this mixer situation, anyone have any that work?
I am using Kodi on my Fire TV and noticed that the movies are only playing in stereo mode. The Dolby settings on the Fire TV itself are set to automatic and trailers play in surround sound. Are there settings in Kodi that need to be modified? Any help is appreciated!
burowyako said:
I am using Kodi on my Fire TV and noticed that the movies are only playing in stereo mode. The Dolby settings on the Fire TV itself are set to automatic and trailers play in surround sound. Are there settings in Kodi that need to be modified? Any help is appreciated!
Click to expand...
Click to collapse
Go to the audio output settings in Kodi, and make sure you are on the expert level. Put the number of channels to 2.0, passthrough enabled, and select all the audio formats at the bottom.
Yes I'm struggling getting surround sound as well, have lived with it up until now as usually everything I'm watching says 2.0 stereo, but last night actually found something that said 5.1 and I wasn't getting any sound from that! lol
Have tried different settings (as above) but still no sound through my amp, have only just really started looking into it but nothing worked in all the different guides I tried.
Will hopefully get this sorted soon, there are quite a few settings in the expert mode so will hopefully get round to trying them all, it's just having to go back and forth after changing the set up that's the pain lol
wonneil said:
Yes I'm struggling getting surround sound as well, have lived with it up until now as usually everything I'm watching says 2.0 stereo, but last night actually found something that said 5.1 and I wasn't getting any sound from that! lol
Have tried different settings (as above) but still no sound through my amp, have only just really started looking into it but nothing worked in all the different guides I tried.
Will hopefully get this sorted soon, there are quite a few settings in the expert mode so will hopefully get round to trying them all, it's just having to go back and forth after changing the set up that's the pain lol
Click to expand...
Click to collapse
What is your connection to the amp? Is it HDMI, or optical?
lennie paz said:
What is your connection to the amp? Is it HDMI, or optical?
Click to expand...
Click to collapse
I have an HDMI connection, when playing a 5.1 video I can see the front left/right speaker icons stuttering on my amp (usually it would show all 5 speakers) and no sound comes through. I suppose it could be the stream but think it's probably my settings...
Is the amp supposed to convert even when playing a 2.0 stream or does it have to be a 5.1? I have always assumed it has to start as 5.1 which is why I've left it until now
wonneil said:
I have an HDMI connection, when playing a 5.1 video I can see the front left/right speaker icons stuttering on my amp (usually it would show all 5 speakers) and no sound comes through. I suppose it could be the stream but think it's probably my settings...
Is the amp supposed to convert even when playing a 2.0 stream or does it have to be a 5.1? I have always assumed it has to start as 5.1 which is why I've left it until now
Click to expand...
Click to collapse
Some amps will convert a 2.0 audio stream into a fake 5.1 stream, but it's an actual setting on the amp. Do you have DD audio set to On in the settings for the AFTV? What brand is the amp?
lennie paz said:
Some amps will convert a 2.0 audio stream into a fake 5.1 stream, but it's an actual setting on the amp. Do you have DD audio set to On in the settings for the AFTV? What brand is the amp?
Click to expand...
Click to collapse
Yes I've set it to DD Plus via HDMI and have now pretty much tried all the settings in the audio options including 2.0, 5.1 and also (my setup) 7.1 but none seem to work, have also tried changing the Output config, Stereo upmix, Resample quality, Keep audio device alive but nothing is happening, still getting no sound when it displays 5.1 DD on the stream, even tried another episode and the same thing.
My amp is a Sony STR-DA3600ES which is DTS capable but like I say the speaker icons flicker when playing the stream so there's definitely something not quite right
I have never had problems with anything else so think I may have to just give up on this Kodi problem
wonneil said:
Yes I've set it to DD Plus via HDMI and have now pretty much tried all the settings in the audio options including 2.0, 5.1 and also (my setup) 7.1 but none seem to work, have also tried changing the Output config, Stereo upmix, Resample quality, Keep audio device alive but nothing is happening, still getting no sound when it displays 5.1 DD on the stream, even tried another episode and the same thing.
My amp is a Sony STR-DA3600ES which is DTS capable but like I say the speaker icons flicker when playing the stream so there's definitely something not quite right
I have never had problems with anything else so think I may have to just give up on this Kodi problem
Click to expand...
Click to collapse
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
lennie paz said:
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
Click to expand...
Click to collapse
Cheers Lennie, I thought about changing the HDMI cable so will definitely try that when I get home, if not will try optical as I didn't even think of that lol
Have tried your settings already (although didn't have the volume on downmix option) with no luck so the cable changes are the only thing left, will let you know how I get on... :good:
I managed to have a look at this last night (after searching various forums) and thought I would try XBMC to see if anything broke in Kodi 14.1, so installed the last Gotham built SPMC (13.4.0) but that had exactly the same results.
Pulled out all my equipment to change the HDMI cable over but that made no difference either, so plugged in an optical cable, changed the audio input on my amp and changed the AFTV to DD over optical and had 5.1 sound straight away :good:
So looks like there's something strange with Kodi/XBMC when trying to get 5.1 surround using HDMI on some amps...
wonneil said:
I managed to have a look at this last night (after searching various forums) and thought I would try XBMC to see if anything broke in Kodi 14.1, so installed the last Gotham built SPMC (13.4.0) but that had exactly the same results.
Pulled out all my equipment to change the HDMI cable over but that made no difference either, so plugged in an optical cable, changed the audio input on my amp and changed the AFTV to DD over optical and had 5.1 sound straight away :good:
So looks like there's something strange with Kodi/XBMC when trying to get 5.1 surround using HDMI on some amps...
Click to expand...
Click to collapse
Glad you got it sorted out. Like I said, I bought a new Pioneer a few weeks ago, and couldn't get the audio to work using HDMI. I returned it and bought a Yamaha, and it works perfectly. The only reason I figured it out, was when the audio wasn't working, I took the AFTV and hooked it up to my other home theater setup, and it worked fine with my Denon receiver. The audio was making a really high pitched static sound when using the Pioneer. My Xfinity box's audio worked fine with the Pioneer, so I know it was the AFTV, not the Pioneer, that was the issue.
lennie paz said:
Here are my exact settings, and 5.1 audio plays perfect. If these settings don't work for you, then it might be that the AFTV doesn't play well with your amp when connected with HDMI. I bought a Denon amp a few weeks ago, and no matter what the settings were, I couldn't get 5.1 audio to work. I returned the Denon, and bought a Yamaha, and 5.1 audio plays perfectly. Another thing you can try, is run an optical cable from the AFTV to the Sony, and see if that works. Make sure you go into the AFTV settings and change the audio output from HDMI, to optical. You may also want to try a new HDMI cable.
Click to expand...
Click to collapse
Know this is a old thread but hopefully you will reply. Using Kodt why do we have to select 2.0 to get 5.1 surround sound or am I not understanding what you are saying?
lartomar2002 said:
Know this is a old thread but hopefully you will reply. Using Kodt why do we have to select 2.0 to get 5.1 surround sound or am I not understanding what you are saying?
Click to expand...
Click to collapse
That's because Passthrough has been enabled, which means your receiver is doing the audio decoding.
Interesting. If I remember correctly I did not have to do that with SPMC Gotham 13.2, strange.
I know this is not the right spot but maybe someone could help me. I just got my shield console and it is sending multi channel audio to my receiver. I DO NOT want multi channel audio i want 2.0 audio. Does anyone know a way to NOT send multi channel audio?
Very helpful thread thanks!
Just a query though...
If I have 'Number of channels' set to 2.0 and have 'Stereo Upmix' on the reciever seems louder and high quality but with vocals coming out of all speakers which to me it should be centre speaker only. But if I have 'Stereo Upmix' off the centre channel is vocal only which to me is perfect but the quality is lower.
Is it just how it is or am I doing something wrong?
Running Fire tv stick (quad core version) running to Onkyo reciever.
Sent from my SM-G901F using Tapatalk
FYI, if you want to keep DTS Passthrough, don't upgrade KODI past 16.1 Jarvis. DTS passthrough is gone in Krypton on AFTV because that "Android" standards require API 23 (Marshmallow/Android 6.0) to "officially" support DTS and AFTV is still on API 22 (FireOS based on Android 5 Lollipop). I don' t see Amazon updating to a Marshmallow based image for FireOS anytime soon. It is a sad day.
Also if you want dts passthrough you can't enable "sync playback to display" otherwise it's going to passthrough as Dolby digital.