Q&A for [ROM] Unofficial CM12 (Lollipop) (11/26/14)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] Unofficial CM12 (Lollipop) (11/26/14). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
If u download zoom camera and open it, close it, restart the phone, cm camera starts to work. After you the boost apn fix you have open apns and press lte for it to start to work.
Does anyone have working lte on ting?
Hoping to see the wifi/miscellaneous battery drain fix in upcoming builds. So far getting pretty bad drain if I leave WiFi on when not near any connection. Luckily I have the ZeroLemon battery so it still lasts all day.
s3 sph-l710 cm12
How do I install the program xposed installer to s3 sph_l710 cm12 lollipop?
ebnnail said:
How do I install the program xposed installer to s3 sph_l710 cm12 lollipop?
Click to expand...
Click to collapse
You cannot. Xposed is not compatible with art, only dalvik. There is no ETA on when it may be made compatible.
MD4?
Can anyone confirm whether this build will work on MD4? I've flashed several times and tried a few different APN zips, but I can't seem to get cell service no matter what I do. I'm assuming maybe it won't work with my baseband, but I'm hoping that's not the case.
Virginization!
A note to all the Virgin Mobile SG3 users, if you want LTE service, you'll have to change the APNs. I used a flashable APN for basically any Virgin Mobile phone, the issue is that some of the scripts don't play nice with Lollipop, what you'll have to do is extract the APN file from the zip and replace the APN file on your phone with it (in the etc directory, I used root browser to do this) and then delete the files telephony.db and telephony.db-journal located in data/data/com.android.providers.telephony/databases After that, you should have LTE
"No SIM Card - Sprint"
I just installed the newest build, but I'm still getting the "No SIM Card" notification. The mobile data icon shows "Sprint" (sometimes), but I can neither make calls nor send/receive SMS. Has anyone else experienced this and/or found a fix?
Edit: I'm also still completely without APNs despite repeated attempts to flash and input manually ("APN settings are not available for this user).
Hey guys, there's a new OC KERNEL in town! It works for all d2 variants and all LP 5.0 roms! it works on 4.4.4 as well! (Created by xda member @thirdzcee)located in the T-Mobile S3 thread, I'm just spreading the love!! So go check it out!!
canodroid15 said:
Hey guys, there's a new OC KERNEL in town! It works for all d2 variants and all LP 5.0 roms! it works on 4.4.4 as well! (Created by xda member @thirdzcee)located in the T-Mobile S3 thread, I'm just spreading the love!! So go check it out!!
Click to expand...
Click to collapse
Does it fix the camera?
counterfeit187 said:
Does it fix the camera?
Click to expand...
Click to collapse
Nah, CM is the only hope to get the camera fixed. We'll have to wait for changes in upcoming builds for that. On the other hand the kernel is solid it comes sweep2wake sweep2sleep doubletap2wake as well as overclock undervolt GPU & CPU control and much more. I've had much better battery life with it also. Its much better than stock.
canodroid15 said:
Nah, CM is the only hope to get the camera fixed. We'll have to wait for changes in upcoming builds for that. On the other hand the kernel is solid it comes sweep2wake sweep2sleep doubletap2wake as well as overclock undervolt GPU & CPU control and much more. I've had much better battery life with it also. Its much better than stock.
Click to expand...
Click to collapse
does music sound alright with V4A installed with headphones plus this kernel no audio skips i mean?
@6th_Hokage
Does for me, others as well, but some have reported not with poweramp
canodroid15 said:
@6th_Hokage
Does for me, others as well, but some have reported not with poweramp
Click to expand...
Click to collapse
so this kernel you mentioned will it work with the Boost variant?
6th_Hokage said:
so this kernel you mentioned will it work with the Boost variant?
Click to expand...
Click to collapse
It should what ROM are you on?
canodroid15 said:
It should what ROM are you on?
Click to expand...
Click to collapse
liquid smooth v4.....android 5.0 for now
Yes it will work, I've tested it myself on liquid CM12 and Validus LP. I'm currently running Validus and V4A works great for me!
canodroid15 said:
Yes it will work, I've tested it myself on liquid CM12 and Validus LP. I'm currently running Validus and V4A works great for me!
Click to expand...
Click to collapse
validus?
It works
Related
Q&A for [ROM][OFFICIAL] CyanogenMod Nightly Builds for d2lte
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I'm having the same problem as dewey1973 (http://forum.xda-developers.com/showthread.php?p=55932521#post55932521 - I don't have enough posts on my account to post there.), no LTE on M11. Except it's on RingPlus instead of Ting. I've tried flashing different apns-conf.xml files but they're no longer working in M11 while they were in M9 and M10.
Robotic Earthling said:
I'm having the same problem as dewey1973 (http://forum.xda-developers.com/showthread.php?p=55932521#post55932521 - I don't have enough posts on my account to post there.), no LTE on M11. Except it's on RingPlus instead of Ting. I've tried flashing different apns-conf.xml files but they're no longer working in M11 while they were in M9 and M10.
Click to expand...
Click to collapse
Have any of you tried taking the APN fix for boost mobile and just changing the APNs to what you need and flashing that?
If you're talking about this (can't post regular links yet, sorry)
Code:
androidforums.
com/boost-mobile-galaxy-s3-all-things-root/840501-mod-universal-boost-apn-fix-d2lte-builds-mod.html
then it looks like that worked! Thanks! I had tried a few other APN fixes that didn't work so I had been looking for another way. I'll send a PM to dewey1973 so he can post it in the main thread.
EDIT: It was working for a while but then stopped working. I'll test it more and update when I get a chance.
Well can anyone help me figure out how to fix the aspect ratio with the front facing camera in the latest few snapshots?? The default camera front facing is fine, but third party apps like snapchat distort.. For example, a perfect circle (a coin) will turn into an oval shape up and down. It's driving me crazy
Play Store has wrong carrier
I am running CM11 M12 and when I head to the play store it says that I am on Verizon instead of Sprint. Everything else works amazing except this. I can provide any information that is required. Thanks
knightsyde said:
I am running CM11 M12 and when I head to the play store it says that I am on Verizon instead of Sprint. Everything else works amazing except this. I can provide any information that is required. Thanks
Click to expand...
Click to collapse
This is a known issue. Shouldn't affect anything or prevent you from installing apps though.
It does interfere a little with setting up google voice, but can be handled by manually editing voicemail options
Battery Life M12
I just flashed to stock to get the modem update, then did a clean install of M12 + gapps + Ting APN's, and my battery life is just tanked. I have the phone plugged into USB currently, with Wifi on, bluetooth off, gps off, and I can't even break even on the charge; I'm at 11% and falling fast. I was on M9 (or M8? I can't remember) before this, and didn't have a problem like this. Is there any known issue with battery life in M12?
ADB Debug
I'm on the latest nightly, can everyone else enable ADB? I enable it and within the second it crashes. The catlog says:
Code:
got -1 reading
Communications error
Java.io.IOException: No such file or directory
Is this just me or a Nightly thing?
---------- Post added at 11:59 PM ---------- Previous post was at 11:15 PM ----------
bussemac said:
I just flashed to stock to get the modem update, then did a clean install of M12 + gapps + Ting APN's, and my battery life is just tanked. I have the phone plugged into USB currently, with Wifi on, bluetooth off, gps off, and I can't even break even on the charge; I'm at 11% and falling fast. I was on M9 (or M8? I can't remember) before this, and didn't have a problem like this. Is there any known issue with battery life in M12?
Click to expand...
Click to collapse
I had M12 for a while, I didn't have too much of a battery life problem, you can add the Performance Profile Tile to the Quick Settings Panel and change it from balanced to power save. I always recommend getting better battery stats, created by XDA Developer chamonix, it's not free but its excellent to see exactly what is draining your battery. Kernel Wakelock, Application Wakelock, or an Alarm or something. As always keep radios, modems and such upgraded.
No MMS or data when flashing the VMU APN fix on CM12.1
I flashed the APN fix and I don't have any data or MMS on CM12.1. Can anyone help me or post an APN fix I can use that will solve this problem for me?
Is anybody using this 12.1 ROM? Feedback? I am using the aicp ROM and it is awesome
Check out the Official 12.1 Builds for D2Spr!!
https://download.cyanogenmod.org/?device=d2spr
This is awesome!
So, I'm assuming flashing the CM12.1 would need to be a clean flash after a full wipe if coming from CM11, correct?
Sent from my CM12 ? HTC Desire 816 on Virgin Mobile USA
Videos
look at videos for recovery, root, and other things. They will explain every question you may possibly have.
Sprint S3 CM 12.1 nightly boot loop
I did a fresh install of cm-12.1-20150514-NIGHTLY-d2spr and Im stuck in boot loop. Tried older versions too and I get the same result. Can anyone help me, I'm running CWM 6.0.4.5
Please Help!!!
I have been searching the forums & Google for the past 2 days trying to find an answer to my question: Does the *stock* cm12.1 kernel (official nightlies) come with an alternative to MP-decision (hotplug) & thermald?! I'm desperate to know!! I've installed kernel adiutor and noticed a message stating that if my kernel has an alternative, to disable the option in the app... So I'm confused & haven't been able to find any info at all on the stock cm12.1 kernel, or what features it has, which would be very helpful & nice to know! Thanks in advance to anyone willing to help me out! Any info at all would be highly appreciated!!
Just incase it matters I'm using the d2spr official CM12.1 Nightlies, & I'm on the 5/24 build. Thanks!!!
Messaging force close
Hey I'm running cm 12.1-20151025 and I tried clean installing the snapshot and the 20151205 nightly and messaging would force close continuously. I tried Google messenger same problem. Does anyone have any ideas ?
Theblaide said:
Hey I'm running cm 12.1-20151025 and I tried clean installing the snapshot and the 20151205 nightly and messaging would force close continuously. I tried Google messenger same problem. Does anyone have any ideas ?
Click to expand...
Click to collapse
Did you wipe /system also? I skipped this and it wouldn't boot on the 12/05 build.
I'm also getting a no sim card notification, and not able to add APN's.
I need help ..Rom cm13 does not function on my phone I compound cm12.1 modem system ND8 what reason
[Q&A] [ROM][5.0.2][Lollipop][Official] NamelessROM 2.0 [BETA] [20150101][Blazing Fas
Q&A for [ROM][5.0.2][Lollipop][Official] NamelessROM 2.0 [BETA] [20150101][Blazing Fast]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.2][Lollipop][Official] NamelessROM 2.0 [BETA] [20150101][Blazing Fast]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Hello! Question, how do we update the rom via OTA? TIA for your reply and fantastic rom that you've made!
everything is good but....
if there is music playing, it plays thru both the speakers and the headset. any idea why or how to fix it?
MrPiggy27 said:
Hello! Question, how do we update the rom via OTA? TIA for your reply and fantastic rom that you've made!
Click to expand...
Click to collapse
Not possible yet
nifaelmasri said:
if there is music playing, it plays thru both the speakers and the headset. any idea why or how to fix it?
Click to expand...
Click to collapse
I don't know why. Trying to fix it soon
Gesendet von meinem GT-N7105 mit Tapatalk
calls speaker problem, its too low volume
Hi i have a problem but its maybe normal on android 5 because when im calling the sound in speaker is not loud so much , its ok after i press volume key during phone call. Is it some fix for this ???
works for me
dialer hangup before call
Inthink there is an issue when making a call. The call hiatory first registers a miased and then dials?
Changelog
Where we can find a complete Changelog ?
Will it work on n7100
Slow Wifi
I have a note II N1075 and recently installed this rom
[ROM][5.0.2][Lollipop][Official] NamelessROM 2.0 [BETA] [20150103][Blazing Fast]
LINK:<<http://forum.xda-developers.com/galaxy-note-2/development-n7105/rom-namelessrom-2-0-t2990237>>
Flashed it with philz 6.48.4
Everything works great
I appreciate the time and effort making this ROM and my question is related to the WIFI as it is way slow comparing to the previous ROM i was using!
Any solution or suggestion?
best regards
Saw a few posts on battery life, but didn't see a solution. Love the Rom, but I am only getting approx 5-6 hours with moderate use. Any ideas?
Sent from my GT-N7105 using XDA Free mobile app
Little things
This rom is coming along nicely. Can the latest SuperSU be included so it doesnt have to update each time we upgrade the rom to the newest version? Not really a biggy at all. The biggest gripe i have is the rom can eat throught its battery fast.
Also FYI everyone else don't forget about using something like faster fix to change the GPS search zone to your correct one! It helps getting locks quicker.
Last build 20150118 Proximity sensor issues
please try if this build fixes proximity sensor issues:
https://mega.co.nz/#!FEsnTTKa!WbAZj4...lATzpXr8dyUi7k
Click to expand...
Click to collapse
Just to report that the sensor is still not working.
(Dirty flash from the previous build)
chung0814 said:
Just to report that the sensor is still not working.
(Dirty flash from the previous build)
Click to expand...
Click to collapse
about to try it out too, i also see you are a lurker like me
TeamFox said:
about to try it out too
Click to expand...
Click to collapse
Tried it out, epic failure caused by twrp 2.8.4.0 had to revert to my full backup thats non lollipop :'( Lollipop has spoiled me with its smoothness.
TeamFox said:
Tried it out, epic failure caused by twrp 2.8.4.0 had to revert to my full backup thats non lollipop :'( Lollipop has spoiled me with its smoothness.
Click to expand...
Click to collapse
Yes:highfive: 6 posts since 2010.
Call Log function is also not working, how about you?
Well nothing worked while on that TWRP it also didn't matter which backup I went to either. So I restored to TWRP 2.8.1.0 and then restored my 4.4.2 TW rom. Feels like my battery lasts forever now. Esp with the agni kernel. For now I'll stay on that rom but I will be returning to this when its a bit more mature. Our note 2's still have so much to give, Samsung should at least release the source code/ drivers needed to make our own roms.
Bootloop problem
So I've discovered this ROM, pretty solid reviews. :good:
However, I'm facing a bootloop issue. Followed the instructions carefully, using Clockwork Recovery 6.0.4.1.
Facing a bootloop after installing both ROM and gapps. Screen is just stuck on the four balls floating around, which is the boot animation.
Coming from stock ROM, have not installed any kernels before. :fingers-crossed:
Could you please provide some help?
I've been running this ROM for a few days now with agni kernel. Awesome.
Ringtone and other tonrs seem to reset to default regularly. Other than editing build prop is there a permanent solution either ready or in the pipeline.
Its no biggy but looking round to see who's phones ringing to be told its your own isn't a good look.
Sent from my GT-N7100 using Tapatalk 2
Language Pack
NamelessROM 2.0 does not have the complete Spanish Interface
The reason is because it is in alpha stage?
No advanced knowledge and my phone at disposal, could add complete language pack?
Thanks for your answers
Q&A for [ROM][CM12.0] Official CM12.0 for LS980
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][CM12.0] Official CM12.0 for LS980. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
be_CZAR said:
I get a boot loop when i try to flash this rom, any reason why?
Click to expand...
Click to collapse
Same. I thought it might just be a corrupted download at first, but I've had no luck after multiple attempts.
I tried wiping Dalvik and Cache, and still no luck
be_CZAR said:
I tried wiping Dalvik and Cache, and still no luck
Click to expand...
Click to collapse
Can you get a logcat of it bootlooping? I just dirty flashed from cm11 to cm12 (on the latest nightly) and had no issues. Before I bumped it to official I checked for any issues with clean or dirty upgrades. If you can grab a logcat it'd be most helpful to see where its getting stuck.
Shelnutt2 said:
Can you get a logcat of it bootlooping? I just dirty flashed from cm11 to cm12 (on the latest nightly) and had no issues. Before I bumped it to official I checked for any issues with clean or dirty upgrades. If you can grab a logcat it'd be most helpful to see where its getting stuck.
Click to expand...
Click to collapse
I heard the official build had a bad boot.IMG
Wait for next nightly.
CM 12 on ls980 feedback
Hi are there more people or a link for input how things are going on our device LS980 , just though it would be nice to see what others think and how its going .
jigglemoe said:
Hi are there more people or a link for input how things are going on our device LS980 , just though it would be nice to see what others think and how its going .
Click to expand...
Click to collapse
I would also like to add this question how is the volume and more important to me the headphone volume running on Lollipop , I read somewhere that the volume mods for kitkat wont work with lollipop?
jigglemoe said:
I would also like to add this question how is the volume and more important to me the headphone volume running on Lollipop , I read somewhere that the volume mods for kitkat wont work with lollipop?
Click to expand...
Click to collapse
There is a viperlolli that works. Try using that.
secret.animal said:
There is a viperlolli that works. Try using that.
Click to expand...
Click to collapse
Thanks ! I cant believe after all the searching i never found Viper mod I have two separate mods now for kitkat that boost one for headphones and the other speaker but viper looks like one more reason for me to check out lollipop on this phone .
anyone know what radio is required?
i had zve bump'd everything, then installed autorec and ran it. so now what radio should i need?
Thanks.
riggsandroid said:
anyone know what radio is required?
i had zve bump'd everything, then installed autorec and ran it. so now what radio should i need?
Thanks.
Click to expand...
Click to collapse
Zv8 radio
How do I go about backing up my modem/efs? Just want make sure I cover all my bases
Juls317 said:
How do I go about backing up my modem/efs? Just want make sure I cover all my bases
Click to expand...
Click to collapse
Updated version of TWRP has those options
Tap to lock not working
I can confirm this that tap to lock is not working, im on the latest build too that is 15-2 and its not working when you double tap to lock.
Clean flashed from stock ZVE. Wiped, installed ZV8 modem, cm12, and gapps. Everything is working well but there's one major problem I've come across... I can't access Settings > Display. It always crashes with an error. Have I done something to cause this, and is there a simple fix? Should I reflash? Thanks.
DJMaj07 said:
Clean flashed from stock ZVE. Wiped, installed ZV8 modem, cm12, and gapps. Everything is working well but there's one major problem I've come across... I can't access Settings > Display. It always crashes with an error. Have I done something to cause this, and is there a simple fix? Should I reflash? Thanks.
Click to expand...
Click to collapse
Seems to be an issue with that build. Next nightly will probably fix it.
Sprint VVM and CM12
Anyone else use Sprint's Visual Voicemail. I had it on the stock ROM and like it. However, on my first install of CM12 on my LS980, I noticed the voicemail message audio was horribly distorted.
Can someone else confirm?
Viber and voicemail both are distorted, tab to sleep is not working, crashes in settings, nfc not working as well, loads of crazy bugs
2/21 build seems to have fixed Display setting FCing. Thanks!
2/21 build seems to have fixed Display setting FCing. Thanks!
What's the reason for modems after zv8 not working? In my area Spark is widespread and even fills in some areas band 25 lte isn't present, so I'd prefer to be able to use a modem that supports it.
Q&A for [ROM] [5.0] Samsung Galaxy S3 [d2tmo] [Nightly] LiquidSmooth Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.0] Samsung Galaxy S3 [d2tmo] [Nightly] LiquidSmooth Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
cameron_taylor said:
Camera fix ??? .... really wanna use snapchat and instagram ...
Click to expand...
Click to collapse
Stock and instagram cameras are not working, but snapchat's IS working for me!
From my experience with the rom, open camera is working really good.
Willbur415 said:
Stock and instagram cameras are not working, but snapchat's IS working for me!
From my experience with the rom, open camera is working really good.
Click to expand...
Click to collapse
You can also take a picture with open camera/nexus camera and then share it with instagram/snapchat. A few extra steps but it works
Sent from my SGH-T999 using XDA Free mobile app
Does this rom have a black material design theme?
lilipop roms
So I am running the cyanide L shift kernel version of lolipop or android 5 and I was wondering what the differences are between the two...
Is it the Launcher used? or Is Cyanide L and Liquid Smooth the firmware and the Launchers are a totally different thing? I'm not having any issues with my build right now... its running smooth like butter (only negative thing is my data wifi signal is really bad... I updated to NC1 but heard I may need to go to NC2 or NC4?? I dunno... anyways whats the differences? and I don't mean one is cyanide the other is Liquid smooth... I mean what are the actual differences in detail please...
I really really don't like the launcher (nova) used in the cyanide L build...
Mic issues
Mic isnt working with video chat apps
Anyone able to deposit a check using any banking app? Bank of America app doesn't work for me. I assume this is related to the camera issues.
Sent from my SGH-T999 using XDA Free mobile app
scheduler
Hi i want to thank you for the great work your doing. Im having issues with changing the i/o scheduler in the performance menu. No matter what i pick it stays as row as soon as i exit settings and apply on boot doesnt work either. I have tried clean flash reboot clear cache wipe dalvik and no luck. The only way i can make it stay is by another app.
Seriously, what is going on with VIPER?
No matter how many time I install the driver it's always "Not running, or Driver Status: Abnormal."
I downloaed the se Linux change, and it set it to permissive. Everytime the phone resets it goes back to enforcing. WHy won't it stay on permissive? I am using the default kernel with the LiquidSmooth
I can't get viper to work. At all. This is on a brand new fresh install, wiped away clean internal SDCard, starting completely anew.
This is frustrating the crap out of me.
Sent from my SGH-T999 using XDA Free mobile app
two files
[/COLOR]Soft keys on my s3 don't vibrate I can't seem to find the option to turn them on?
[/COLOR]
nafeasonto said:
Seriously, what is going on with VIPER?
No matter how many time I install the driver it's always "Not running, or Driver Status: Abnormal."
I downloaed the se Linux change, and it set it to permissive. Everytime the phone resets it goes back to enforcing. WHy won't it stay on permissive? I am using the default kernel with the LiquidSmooth
I can't get viper to work. At all. This is on a brand new fresh install, wiped away clean internal SDCard, starting completely anew.
This is frustrating the crap out of me.
Sent from my SGH-T999 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried installing a different kernel yet? I have shift kernel installed on my LS LP and VIPER is working smoothly on my phone.
Jesus226 said:
[/COLOR]
Have you tried installing a different kernel yet? I have shift kernel installed on my LS LP and VIPER is working smoothly on my phone.
Click to expand...
Click to collapse
do you have a link, the link in the post is not working.
Sent from my SGH-T999 using XDA Free mobile app
Camera
I flashed latest version "v4.0-2015-01-27", disabled and wiped data for stock Camera app, installed both Open Camera and Nexus Camera and neither are working. The window just goes black and crashes. Any idea on how to fix? People were saying it worked earlier in the thread so maybe it broke in a more recent update, would flashing an older version fix it?
This more updated that the 5.0.2 LP version?
Is this ROM more updated than the 5.0.2 LP ROM that you have fenixus??
Reply
Thanks
WHich do I choose?
Do I choose the Liquid Themes or Liquid Layers??
jestincheppad said:
Do I choose the Liquid Themes or Liquid Layers??
Click to expand...
Click to collapse
That's up to you, but I believe LS is going to discontinue the Themes builds...
GS³: SlimKat + leanKernel Edition™
ギミチョコ！！
no sound for the incomming calls
Hey. I really like this ROM, however I have a problem with calls. When someone calls me, the phone doesn't ring, just vibrates (sometimes it vibrates just once and that is it). THat is very sad because this ROM is so smooth and fast. Does this happen only on my phone? and also, I am on the slimkat now with cyanogenmod based recovery, so whenever I flash this rom or any other lollipop based ROM, I get the message from the recovery that I may lose the root access. I always chose the Fix option and everything runs just fine with the root access. But, I get this message everytime I go to recovery. Thank you for your great work. Oh, and just to clarify, the above mentioned problems happen on the newest build (3/6/2015) and the previous build (don't remember which one specifically).
INazar said:
Hey. I really like this ROM, however I have a problem with calls. When someone calls me, the phone doesn't ring, just vibrates (sometimes it vibrates just once and that is it). THat is very sad because this ROM is so smooth and fast. Does this happen only on my phone? and also, I am on the slimkat now with cyanogenmod based recovery, so whenever I flash this rom or any other lollipop based ROM, I get the message from the recovery that I may lose the root access. I always chose the Fix option and everything runs just fine with the root access. But, I get this message everytime I go to recovery. Thank you for your great work. Oh, and just to clarify, the above mentioned problems happen on the newest build (3/6/2015) and the previous build (don't remember which one specifically).
Click to expand...
Click to collapse
Get with fenixus on the main thread on the calling issue. You may have to provide logcats for him. As for the second problem, I believe SuperSU should be automatically flashed when the ROM is flashed, not sure of that's a recovery issue, but I know the auto flashing of SuperSU works on TWRP...
GS³: SlimKat + leanKernel Edition™
ギミチョコ！！
This suffers from the same thing every Slim rom does.
Anytime you set your default Ringtone, when you restart it defaults back to default. I guess because it is on the External SD card. Is there no way around this?
Another thing that is happening is everytime i restart the phone it has to update Google Play services.
I am in the middle of installing the ROM.
When I did the same ROM before, it took a few minutes to install, this time it's just stuck there it looks like.
Have I done something wrong? its been 15minutes or so. I will wait longer.
Q&A for [ROM][5.1.1][UNOFFICIALParanoid Android-L[07/31/2015][Z00A][ZE551ML]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.1.1][UNOFFICIALParanoid Android-L[07/31/2015][Z00A][ZE551ML]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
gapps
Deadman's gapps...which is for x86 devices....??
Whats the battery and ram status....??
Installed
2nd sim not working....
Battery drain too fast...
camera 5.1.1 zenfone 2
How about the camera?
still with errors or good to go?
Hi Niropa
Please Pac-Man And Carbon rom For Zenfone 2 Port ?
Thank you
does this rom supports the official features of PA like the hover and peak?
Not sure what I'm doing wrong but I flashed and whenever I launched an app like browser/play store, the app would crash. I tried rebooting but didn't fix. I know very vague post, anyone have an idea?
Hi Niropa
Pac-Man Rom And Carbon Rom Port The Zenfone 2 ? Please
ThanThank you
double tap to wakeup????
hơ to do it???
Thanatos12 said:
Hi Niropa
Pac-Man Rom And Carbon Rom Port The Zenfone 2 ? Please
ThanThank you
Click to expand...
Click to collapse
It seems that he have a PAC Rom
It's on 0728 right now :https://www.androidfilehost.com/?fid=24052804347782442
pac rom 2015-08-01
new pac rom found?
i dit not test it? someone?
---------- Post added at 11:42 AM ---------- Previous post was at 11:36 AM ----------
geertus said:
new pac rom found?
i dit not test it? someone?
Click to expand...
Click to collapse
How about camera on pac rom?
pca rom 2015-08-01
search google:
pa_Z00A-5.1-20150801.zip
new pac rom 2015-08-01
root access
please reply fast
how can i have root access....its showing no root access...i have installed 01/08 build.
ota updates
Not showing zooA on paranoid android list on rom.....can we update directly from rom....??...it says ZOOA doesnot exist....
just want to ask, how to change battery icon on status bar?
rex_perfect said:
please reply fast
how can i have root access....its showing no root access...i have installed 01/08 build.
Click to expand...
Click to collapse
Flash SuperSU separately to get root
rex_perfect said:
Not showing zooA on paranoid android list on rom.....can we update directly from rom....??...it says ZOOA doesnot exist....
Click to expand...
Click to collapse
Yes we only became official yesterday, it'll take some time before builds start showing up on paranoid androids website. For now we can use my builds
jellyfeels said:
just want to ask, how to change battery icon on status bar?
Click to expand...
Click to collapse
Good question! It used to be in battery settings but I think they removed it for now.
Will it be possible to use other kernels with this rom?
I tried Deathly, but (like said in the thread) it doesn't boot. I prefer to use the bioshock governer but it's not available in the kernel packaged with the rom.
Oishikatta said:
Will it be possible to use other kernels with this rom?
I tried Deathly, but (like said in the thread) it doesn't boot. I prefer to use the bioshock governer but it's not available in the kernel packaged with the rom.
Click to expand...
Click to collapse
Try the paranoid android specific kernel in deadmans thread
Great rom so far. On cm I had issues with mms and mobile data switching off, but no such problem on PA. Only issue I have came across is the camera crashing and video recordings have no audio. . I've tried multiple apps and all have issues. . Please add tap to wake.
Great job!
Which Xposed version will work with this rom?
Thanks