Related
So I got an HDMI cable today for the device and I am pretty disappointed. I plugged it in and it only detected the device as displaying 720p. Adding to this, the sides were cut off. Another issue I've been having is that whenever I move the device, the picture would disappear, but that might be an issue of the cable itself.
Anyone have any experience with the HDMI out and if I can get it working correctly? I am running the first ICS leak on the device currently.
Also, I've read that some people were able to get 1080p out of this?
Its either the cord, tv, or the port. I know on my TV there was an issue where the video was 1080i/p (I forget which), but the audio didn't play, plugged it into a different port, and the problem was solved. This was on a samsung TV and results may very. If you can, try a different port, then a new cord, finally try it on another hdmi device and see if it works, if the problem continues, then just replace the tab.
God, I sound just like a support person, "Results may very," lawl.
Tried it on my Sony TV and my Samsung Moniter with the same results. I've managed to get a slightly better picture after messing around with the settings on the Samsung. Still not satisfied with the end results.
I feel I need to try connecting this to a scan converter or something just to see what the device is actually sending and stuff.
Hmmmm, I'm not the only one. My tablet worked find on my projector but now it doesn't even know when it is connected to it. Hooking it up to the 47 inch Samsung works without a hitch. I'm going to order the docking station and see if it makes a difference.
Sent from my A100 using Tapatalk
Both ics and hc hardware GEN2 I have sides cut off. I've tried different modes on my TV without much success. I think ti interlacing is off somehow.
Sent from my rooted Acer Icona A100 using Tapatalk.
Picked up an HDMI cable for the a100 off ebay for $5 with free shipping. 10ft with gold plated terminals and it has worked perfectly since day one. I hate how you can't turn the tablet screen off while streaming video :-\ other than that its a treat to have it displayed on our 50" Samsung and the quality is quite decent running the latest ICS leak.
I've tried 2 hdmi cables on 2 different TV's and only get 720p signal and the bottom taskbar is cut off and a bit on the top and maybe sides. I know for a fact that these cables support 1080p. But HDMI is just mirroring so it will mirror at the same resolution as the tab or as close as it can. And our tab is 1280x800 so it won't mirror in 1080p
Sent from my PG86100 using xda premium
Hi Guys,
I have the one x, Optoma pk301, MHL adapter and the required HDMI cable. Got the connection all set up but I'm unable to get a display on the projector. Are there any settings in the phone that i have to change/switch on to display on an external screen?
Thanks
Mine worked right out of the box. I used a Galaxy SII adapter. As soon as i connected HDMI, charger and phone, it switched to landscape mode and the picture showed up on the tv.
As far as i am aware, there are no settings on the phone to enable/disable MHL.
Did you plug the USB to charge ? It says no power > no video
Im using this one:
http://www.amazon.com/Samsung-Smart-Adapter-Galaxy-Mobile/dp/B005MR82GA
Its working now. Was displaying a red X before. Didn't do anything other than just unplug and re plug everything
Can you tell me if I play movie on my TV by mhl cable, does it shows external subtitles (.srt)? And, can hox play movie on TV with phone screen of during.
flakz0r said:
Mine worked right out of the box. I used a Galaxy SII adapter. As soon as i connected HDMI, charger and phone, it switched to landscape mode and the picture showed up on the tv.
As far as i am aware, there are no settings on the phone to enable/disable MHL.
Click to expand...
Click to collapse
cool! Is your tv full hd, and if so what res. do you get from the phone?
"Micro USB to HDMI® MHL Adapter - Black" - quick review
I just received the MHL adapter from MonoPrice, about $10 US:
http://www.monoprice.com/products/p...=10833&cs_id=1083314&p_id=8805&seq=1&format=2
The product description implies some phones can power the MHL adapter, with the One X you must supply power via a micro-USB charger. Be forewarned, the load may be a little higher than what some phone chargers can deliver; my EVO 4G charger would shut off after about 10 seconds, an old Nexus One charger worked fine.
Output is 1280x720 60Hz (should auto-adjust to the TV, don't have a PAL display here to confirm this). The Samsung HDTV was set to "Just Scan", meaning no scaling is done by the TV.
The resultant HDTV image is underscanned by about 35 pixels on each side, 20 pixels on top and bottom, resulting in a display area of 1210x680. I think this is a problem with the One X GPU drivers, and not the adapter because I doubt a simple device like this can do any scaling. At CES, I played with a few Transformer Primes running Shadowgun Multiplayer, mirrored to HDTVs at 1280x720, and there was no underscan, so this is likely not be a limitation of Tegra 3 GPU.
I got the red X once (displayed on the TV), afterwards it would not mirror the display to the TV until reset, so the connection handshaking is kinda finicky. I've been plugging the micro-USB power last, after the phone and the HDMI is connected and the phone is powered on. Sense should flip into landscape immediately, if not, something is wrong. If you power on after everything is connected, you should see the lock screen in portrait for a couple seconds, then it'll rotate. Sense works surprisingly well in landscape, I'm surprised that HTC didn't allow this mode without an MHL adapter connected.
There is a slight performance hit on the One X when display mirroring is active:
GLBenchmark 2.1.4, native display:
Egypt Standard: 48 fps
Pro Standard: 54
GLBenchmark 2.1.4, HDMI mirrored:
Egypt Standard: 42 fps
Pro Standard: 52 fps
If you want to demo a One X, play Shadowgun THD on a HDTV, it looks absolutely amazing. You are "playing blind" on a touchscreen, but once you get a feel for turning and shooting (right thumb), it's pretty easy. Ideally, this setup is screaming for a game controller, but I haven't come across a thread about this yet for the One X. Support for analog sticks has been in the OS since 3.1, so the keymapping utilities on the Market shouldn't be necessary, but I need to look into this further.
Note: the images were taken of the HDTV using a point-and-shoot and scaled to 720p, so you can see the degree of underscan (the unfiltered decimation is very visible in the fonts).
mertzi said:
cool! Is your tv full hd, and if so what res. do you get from the phone?
Click to expand...
Click to collapse
The TV is full HD, the phone passes 720p through the adapter, looks like it's a direct mirror.
---------- Post added at 08:08 AM ---------- Previous post was at 08:07 AM ----------
themanson said:
Did you plug the USB to charge ? It says no power > no video
Click to expand...
Click to collapse
Yeah, it doesnt work if you dont connect the power cable to the adapter.
And subtitles? Are they on the TV please?
Looking nice on the tv
milkobgd said:
And subtitles? Are they on the TV please?
Click to expand...
Click to collapse
Everything you see on the phone is mirrored on the TV. If you are watching a movie with subtitles on the phone, you will obviously see them on the TV.
My best experience so far watching 720p & 1080p has been with MX Player, but a lot of people also use Dice and Mobo.
That was not the case with my sgs and tv out and as far as I know with sgs2 tv out via mhl. It's mirroring everything but subtitles.
hi i have two days htc one x and have two hdmi cable to tv but same result no signal what i do wrong i use this one please helpme
I bought a MHL adapter from Mobilefun and I get the phone picture on a my PC monitor, with a little pixel loss as described by rasterX.
However I tried looking at a video I recorded with the HOX. I played the recording using the stock player and MX player.
In both cases, the playback is too fast on HDMI, it's like pushing a fast forward button.
With MX player I tried the different options (hardware/software): hardware is too fast, software is variable: complex pictures are too slow to display, less complex pictures are shown faster but since the display time changes according to the picture, the software playback is useless.
I tried two different PC monitors, one is Philips with a DVI-HDMI adapter, the other a DELL with a direct HDMI input, results are the same for both. I'm in a 50Hz country (France) if ever this can have a side effect...
Anyone has similar issues with MHL?
I tried my Samsung MHL adapter and it worked. My TV resolution is 1366x768.
When I connect all cables (inclusing power of course) I get portrait screen on my TV. As soon as I play movie or game, it goes landscape. When back to homescreen, it's portrait. No issues in Diceplayer or MX Player. Worked in HW and Software. Software mode allows to see subtitles on TV.
Sound only out of one channel
I only seem to be getting audio out of the left channel. I've tried 2 MHL adapters, and 2 different HDMI cables with 2 different TVs.
What's going on!?
jammy1 said:
I only seem to be getting audio out of the left channel. I've tried 2 MHL adapters, and 2 different HDMI cables with 2 different TVs.
What's going on!?
Click to expand...
Click to collapse
Can someone check to see if they are getting both channels please? I've also tried 3 different players.
jammy1 said:
Can someone check to see if they are getting both channels please? I've also tried 3 different players.
Click to expand...
Click to collapse
HI Jammy, I will test it.
What player are you using? MXPlayer or stock. what sort of files?
jammy1 said:
Can someone check to see if they are getting both channels please? I've also tried 3 different players.
Click to expand...
Click to collapse
I'm having the same problem, only left channel is working on TV over mhl adapter and if I plug headphones in one x 3.5 mm jack it is OK. I tried BS PLAYER and MX PLAYER.
Same symptom here!
hmm ... bug?
Ok so Im pretty sure 99% of you will not be able to help me because I believe I have a specific problem with my television. I have a Panasonic TC-P46S2 46 inch plasma and have been struggling with MHL.
When I plug in the adapter, not only does it not properly fit on the screen, I get random gray fuzziness every once in a while. So as far as the fit of the screen, I have tried every option that I can on the TV to get it correct; eg: Stretch, zoom, full, h-fill. Nothing corrects it and my screen in every direction is cut off by a few inches. This is a 1080P TV but should be able to display a 720P image perfectly. I am using a PNY MHL adapter.
The only thing I can think of is that the galaxy screen is not exactly a 720P resolution and the TV can not correct for it. Any ideas? Any ideas on the random gray fuzziness disconnects as well?
Did you try the phone and connector on another tv? Or another connector onto the same tv?
Sent from my Galaxy Nexus using XDA App
I have a monoprice adapter coming but don't have another HDMI source to check the phone and adapter with. If the new adapter does th same thing I'll assume its the TV. Unless someone offers some other advice.
Hi,
I have a Note 8 on 4.1.2 with Samsung Smart Dock, There are a few questions i would like to ask if anyone has experience of this combination.
1: Screen output to TV, its seems its outputting 1280x800 therefore i get a little chopped off at the top and black bars down the sides in landscape, Nearly full screen but not quite. Videos will play full screen though, just games and android desktop/apps seem to have this chopping off effect. Is this normal ?
TV's i have tried are all 1080p and 720p and a 2560x1600 Dell monitor.
2: Anyway to make 4.2.2 work with Dock ? it only charges
3: Extension cable - I have purchased a 20cm 11pin female to male cable so i can sit the Note outside the dock in landscape. Nothing is recognised using this. I know there is an app to force rotation but i feel safer placing it in landscape with a Moko case.
Would i be right in assuming the Dock is 11pin connector ? and the note 8 11pin also ?.
4: Anyway of editing the default keyboard layout without rooting ? MelE F10Pro needs a few default keys changing.
Advanced apology if this should be posted in Accessories sub
Thanks in advance
Nogs
nogs said:
Hi,
I have a Note 8 on 4.1.2 with Samsung Smart Dock, There are a few questions i would like to ask if anyone has experience of this combination.
1: Screen output to TV, its seems its outputting 1280x800 therefore i get a little chopped off at the top and black bars down the sides in landscape, Nearly full screen but not quite. Videos will play full screen though, just games and android desktop/apps seem to have this chopping off effect. Is this normal ?
TV's i have tried are all 1080p and 720p and a 2560x1600 Dell monitor.
2: Anyway to make 4.2.2 work with Dock ? it only charges
3: Extension cable - I have purchased a 20cm 11pin female to male cable so i can sit the Note outside the dock in landscape. Nothing is recognised using this. I know there is an app to force rotation but i feel safer placing it in landscape with a Moko case.
Would i be right in assuming the Dock is 11pin connector ? and the note 8 11pin also ?.
4: Anyway of editing the default keyboard layout without rooting ? MelE F10Pro needs a few default keys changing.
Advanced apology if this should be posted in Accessories sub
Thanks in advance
Nogs
Click to expand...
Click to collapse
I don't know about the Smart Dock, but I do have the MHL to HDMI adapter.
Your monitor or TV must have the ability to do a smart sync or have options to allow for vertical and horizontal size adjustment.
As for the wired HDMI, you will need to plug in the Samsung charger into the dock (it should have a USB connection), and use a good quality 6ft / 1.6m HDMI cable.
My Samsung TV has a hidden HDMI feature for PC input. You must use the HDMI source that has a PC DB15 input associated with it. In my case HDMI 3 input, and go into the menu for input label and change it to PC. Once that is done, you will have the ability to adjust the TV and should note that the image may have a blank unused area for a boarder (picture frame) around the image.
The maximum resolution is 1280x800 but the kicker is the app and the resolution of the tablet itself. All 1080i will be converted to 1280x800 maximum. I got tired of cabling, and ended up getting a mid priced HDMI dongle which allows miracast. They are both compatible for picture image. Just there is a distance and bandwidth limitation with wireless, so you must have a good signal and proper connection speeds to maintain high bandwidth to the dongle.
I am experiencing weird bug. Connecting to DVI monitor through adapter direct forces 640x480. Through AV receiver black screen at all, only audio works. I guess my monitor or adapter is the reason, however this setup works well with raspberry pi (1280x1024).
Does anybody using HDMI to DVI adapters to connect Fire Tv? Is there any way to force resolution? Changing through gui is disabled for me.
Sent from my LG-D802 using XDA Free mobile app
I'm having a similar problem. My TV is old and doesn't have an HDMI port, so I'm using an HDMI to DVI adapter as I did with my Pi. My screen goes black right after "Checking for Updates"
This is apparently an HDCP issue, which I don't know much about. My TV's DVI port is supposed to be HDCP compatible. There are "active" adapters that can fool the Fire TV and make it work, apparently, but I'm trying to get it working without having to spend another $30 on another stupid adapter.
It's a very disappointing bug, I guess. When I connecting it through receiver my monitor shows 1280x720 but screen is always black. However rarely I can catch flickering with signal. It means monitor support this (720p) resolution. On direct connection it works, but at 640x480 and not allow to change resolution. I thinking about buying optical audio cable to connect it to receiver directly but it's about 30$ and resolutions is so odd. I hope this will be fixed with new OTA. So if anyone is thinking about to buy Fire TV to use with DVI monitor, right now it looks like a bad idea. I'd rather bought something other if know that.
iRet said:
It's a very disappointing bug, I guess. When I connecting it through receiver my monitor shows 1280x720 but screen is always black. However rarely I can catch flickering with signal. It means monitor support this (720p) resolution. On direct connection it works, but at 640x480 and not allow to change resolution. I thinking about buying optical audio cable to connect it to receiver directly but it's about 30$ and resolutions is so odd. I hope this will be fixed with new OTA. So if anyone is thinking about to buy Fire TV to use with DVI monitor, right now it looks like a bad idea. I'd rather bought something other if know that.
Click to expand...
Click to collapse
I got my TOSLINK cable for about $5 (with Prime shipping) from Amazon, and a TOSLINK to stereo RCA converter from eBay for $13.
When you get the black screen, if you unplug the HDMI and plug it back in with the right timing (fairly quickly but not too quickly) you can kind of make it work. It looks like crap but the menus are navigable. The first time, I had colorful static with the clear picture flashing through every 5 seconds or so. I reseated the HDMI cable again a few more times and it came up clear (except for the terrible resolution).
Thank, I will check for cheaper dealer. The price I've talking about is for belkin cable. As for you hack thanks for information may be it will be helpful for someone. Behaviour you describing stopped for me after first OTA. Right now I always get crap resolution on direct connection without flickering. But before update it flickers continuously too. I hope next OTA will fix it. May be drop a line to amazon is make sense?
Sent from my LG-G2 using XDA Free mobile app
Finally I've bought a cheap TOSLINK cable, and was really disappointed to find it almost quiet. For an hour trying to switch different modes on Fire TV and AV receiver. My last hope was factory reset and it helps, so, I'm with sound right now it's much better, but still on a crap resolution. I hope Amazon will fit it, I believe hardware is ok.
Sound works for a day and again disappeared. I think for some reason device forced routing it to HDMI. I've just leave it along for a day and after woke up uncovered no sound. However receiver show, that signal is ok, if not it is blinking. But signal is silence. I started to think about selling this piece of crap.
I found some info about this bug. It's a well known android problem.
Some sources mention it was fixed since 3.8 kernel issued.
Current firmware incorporates 3.4. I hope next update will fix this.
iRet said:
I found some info about this bug. It's a well known android problem.
Some sources mention it was fixed since 3.8 kernel issued.
Current firmware incorporates 3.4. I hope next update will fix this.
Click to expand...
Click to collapse
Any updates on the situation? I was hoping to temporarily connect my Fire TV to a monitor that also only has DVI input. I do have an HDMI-DVI-cable but it's going to be another two weeks unti the actual Fire TV is released here in Germany.
jpde said:
Any updates on the situation? I was hoping to temporarily connect my Fire TV to a monitor that also only has DVI input. I do have an HDMI-DVI-cable but it's going to be another two weeks unti the actual Fire TV is released here in Germany.
Click to expand...
Click to collapse
The last version I've checked was second update which not affects root. And problem still present. However with low resolution it works, I believe this is a kind of safe mode. Currently my monitor is burned out, so no news.
iRet said:
The last version I've checked was second update which not affects root. And problem still present. However with low resolution it works, I believe this is a kind of safe mode. Currently my monitor is burned out, so no news.
Click to expand...
Click to collapse
Man I really wish they could fix this or have a workaround!
mastermind85 said:
Man I really wish they could fix this or have a workaround!
Click to expand...
Click to collapse
Well, finally, I've checked this DVI-HDMI adapter with brand new monitor and got the same results. Possibly it's an adapter issue. However Raspberry Pi works well through it, but Fire TV only in safe mode on two different displays.
iRet said:
Well, finally, I've checked this DVI-HDMI adapter with brand new monitor and got the same results. Possibly it's an adapter issue. However Raspberry Pi works well through it, but Fire TV only in safe mode on two different displays.
Click to expand...
Click to collapse
I would imagine there is a way to have a modified android that doesnt default to safe mode automatically?
mastermind85 said:
I would imagine there is a way to have a modified android that doesnt default to safe mode automatically?
Click to expand...
Click to collapse
Not sure for android, I'm playing with Fedora on this devise, but not yet checked through this adapter connecting directly to new display. Will check with adapter this weekends.
iRet said:
Not sure for android, I'm playing with Fedora on this devise, but not yet checked through this adapter connecting directly to new display. Will check with adapter this weekends.
Click to expand...
Click to collapse
Did anyone manage to work out a solution?
I'm having a similar issue with an hdmi to dvi adapter - works fine if hooking up to a monitor via hdmi, but if using the adapter it only outputs 480p - and says the monitor doesn't support higher resolutions. I'd love to be able to use the AFTV with an older, larger DVI-only monitor that I have.