Related
I just flashed a arhd rom a kernel and InfinitySound mod and then my phone was stuck in the htc quietly brilliant screen...
The main thing is i can't even enter the bootloader with "vol+power down" help please...
Keep pressing the power button for more then 5 second and you will see the 3 buttons blinking. After that phone will restart and then press volume down to enter in hboot.
Then look on xda a tool with witch you will flash a stock kernel.
Perhaps this is the solution for you
Sent from my HTC One X
danct2005 said:
Keep pressing the power button for more then 5 second and you will see the 3 buttons blinking. After that phone will restart and then press volume down to enter in hboot.
Then look on xda a tool with witch you will flash a stock kernel.
Perhaps this is the solution for you
Sent from my HTC One X
Click to expand...
Click to collapse
i tried it, but no luck... it still boots into the htc quietly brilliant screen.
Hold the power button to force a reboot. As soon as your HOX powers off press and hold vol down, keep holding until you enter hboot. It might take a few attempts
First boot can take awial I don't think your stuck its just loading
Sent from my HTC One X using xda premium
It's stuck not loading because I have waited 10 hours already. Also, I keep trying to get it into boot loader , but to no avail... tried 30 times already...
Without getting into the bootloader, there's nothing I can do...
sngweizhi said:
It's stuck not loading because I have waited 10 hours already. Also, I keep trying to get it into boot loader , but to no avail... tried 30 times already...
Without getting into the bootloader, there's nothing I can do...
Click to expand...
Click to collapse
Does your phone keeps rebooting?
If so, it sounds like you haven't flashed the correct boot.IMG
You need to flash the correct boot.IMG that is for the kernel you flashed.
-----
As for boot loader, why don't you just use the adb command?
adb reboot bootloader
As for the button combination not working, you need to hold both power & volume down at the 'exact same time', and don't release them until your boot loader screen shows - even if it does an extra reboot, keep them held!
Sent from my Nexus 7 using Tapatalk 2
HELP
i flashed some cm10 rom from a random market app called rom something lite. and used teamwin recovery to do it. and now my htc one x is stuck on a spinning cm10 boot and it wont go away. i booted into bootloader and even tried facotry reset but it just goes right back to the boot screen. my phone is ruined and i just got it i need help asap!
chrisjcks said:
Does your phone keeps rebooting?
If so, it sounds like you haven't flashed the correct boot.IMG
You need to flash the correct boot.IMG that is for the kernel you flashed.
-----
As for boot loader, why don't you just use the adb command?
adb reboot bootloader
As for the button combination not working, you need to hold both power & volume down at the 'exact same time', and don't release them until your boot loader screen shows - even if it does an extra reboot, keep them held!
oh thank you very much!, i was able to enter the bootloader(finally) when i pressed vol down and power button at the " exact same time". cheers :highfive:
Click to expand...
Click to collapse
sngweizhi said:
chrisjcks said:
Does your phone keeps rebooting?
If so, it sounds like you haven't flashed the correct boot.IMG
You need to flash the correct boot.IMG that is for the kernel you flashed.
-----
As for boot loader, why don't you just use the adb command?
adb reboot bootloader
As for the button combination not working, you need to hold both power & volume down at the 'exact same time', and don't release them until your boot loader screen shows - even if it does an extra reboot, keep them held!
oh thank you very much!, i was able to enter the bootloader(finally) when i pressed vol down and power button at the " exact same time". cheers :highfive:
Click to expand...
Click to collapse
I am having the same problem, and i forgot to backup my previous rom. I rooted, and unlocked my phone, then i tried to install the rom, it installed. however now it just stays in the spinning loading sign for CM10. Is there anyway of putting another rom on the >fake, ie internal> sd card, which cant get removed from the acctual phone? so then i can install that rom? i have tried reinstalling the rom but that didnt work
Click to expand...
Click to collapse
If you have cwm 5.8.4.0 you can mount the sd card as usb drive.
Don't forget to flash the boot.img that goes with the ROM.
fastboot flash boot boot.img
You are probably forgetting to flash boot.img using fastboot from your pc, from your description. After flashing boot.img, issue a
Fastboot erase cache
Or you will most likely get bootloops.
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
same prob
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
Same problem as OP, and I can not get into download mode either. If I do as above, it still goes on booting .
saeidzzz said:
hi, i just decided to root my t mobile note 3 device so the first website was tellin about KINGO 1 step root so i did install KINGO and it said successfully rooted and i clicked finish the phone rebooted and it showed me
Recovery Booting
Set Warranty Bit : Recovery
and this screen keeps looping and i cant even enter recovery mod once the phone turns on it shows me that and it keep looping auto reboot same screen
im not sure if my phone is still alive anymore
any solutions?
thanks.
note 3 t-mobile n900t
Click to expand...
Click to collapse
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
you are a life saver!
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
I thought I was going to have to factory reset my phone like other forums suggested and lose everything. Thanks to your suggestion I was able to get out of recovery reboot loop. Thank you!
Thanks for your help, you are a lifesaver lol! I saved so much money and time because of you. Have a great day
Frank Westlake said:
Enter download mode (hold [VOLUME-DOWN][HOME][POWER] until buzz, then release [POWER]). At the first download mode screen where it says you can press volume-down to boot normally, press volume-down to boot normally.
Frank
Click to expand...
Click to collapse
But how to enter recovery it still says set warranty bit recovery
i am facing problem with set warranty bit: recovery in samsung J5 model...
samsung j5 500f
i have the same problem when i flash twrp recovery..any solution ????
Ghats normal
Sent from my SM-N900T using XDA-Developers mobile app
My Fix
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
ulop3z said:
I held down the Down volume key along with the power and spammed the home button until the download screen came on, just keep spamming it while holding down the other keys, it will reboot just keep spamming, then I plugged it in to my computer, opened Odin and re installed the Root and it booted up fine
Click to expand...
Click to collapse
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Tmobilefan906 said:
Um. U might wanna flash back to stock. Your phone shouldn't do that. Ur messing up your bootloader. Flash newest firmware via Odin
Sent from my Samsung SM-N900T using XDA Labs
Click to expand...
Click to collapse
The phone is fine now, it was just stuck on the loop and spamming home was the only way out, its fine now I've had no problems and it boots up fine
This happens...
This happens to almost everyone at some point of time. There is no need to worry as you just need to flash recovery like TWRP or CWM. To shed some light on this issue... boot loops mainly happen when you uses the incorrect version of software with your ROM or stock firmware. By using youtube you can look at the videos of your phone model and find the recovery version number needed.
For anyone who has a Note 3 T-Mobile phone who is still stuck! I am willing to make a video to show how to fix this and provide all the firmware/version numbers + links in one bundled location to make it easier.
ALL PHONES ARE VERY specific... ONLY USE THE CORRECT FIRMWARE FOR YOUR MODEL PHONE
Again, if you have a Samsung Note 3 T-Mobile, model number SM-N900T and are still lost. Let me know so I can shot a video and bundle files needed.
---------- Post added at 08:44 AM ---------- Previous post was at 08:38 AM ----------
cdresor said:
If the advice above didn´t work (nothing happened when pressing the usual VOL down - home - power etc), this is how I managed:
I tried booting around 25 times with the power button released at different times. Did not work.
Tried to insert battery when pressing the 3 buttons. Did not work.
I let the battery run completely empty. Started charging the phone and pressing the 3 buttons. Did not work.
I charged the phone full (with booting the whole time....needed to put it somewhere quiet). After estimating it was full, I pulled out the battery, preparing to send it to mobiletechvideos.com (they saved me before). After a few hours I wanted to see the error message so I could write them. When I inserted the battery, I got the regular download mode! Nowthen, would I dare to boot it since I am not really sure what to flash to my phone?
I rebooted, and now the phone is back to normal. OTOH, I will not try to flash CWM/TWRP again, so goodbye custom roms (Omega )
Click to expand...
Click to collapse
Don't be scared by this... just choose the correct versions before blindly trying to install a ROM. Also, only use links from main sources if you dont fell like auditing the code!
Hi guys, sorry for might be late about helping you now years later... But recently I've found something interesting about fixing this issue.
*****
Fix: (100% working in Galaxy Grand Prime SM-G530H)
UPDATED: More detailed info!
# Before flashed Recovery or Root:
1. Root device using Odin or any other rooting known workaround.
2. Backup Recovery (optional), and Kernel using Rashr (available on PlayStore).
3. Flash Custom Recovery (TWRP), using Odin PC software or TWRP android app.
4. Flash backed-up Kernel.img file to Boot partition using TWRP install section.
5. Reboot system (It may take a few time to boot)
# After flashed Recovery or Root: (accidentally or without knowing)
1. Search online and download your exact Phone Stock Kernel.
2. Follow *before flashed* above ↑ from 3rd.
Bonus info:
Even after flashing TWRP, you might be able to Boot device yet, by going to TWRP → Advanced → Reboot system. (It bypass bootlooping to Recovery, while: “Set Warranty Bit : Recovery”).
That's all! Try at your own, then share it!
Hello,
I installed a custom ROM (ViperOneM8+4.6.1) on my M8, which is the international edition M8QL_UL.
I now suspect this ROM is not compatible, as the phone is stuck in a reboot loop - the white screen with the red text at the bottom appears, and then about 35 seconds later the screen goes blank and it restarts.
I've tried holding the power button down to try and turn it off, but it won't stop restarting.
I've tried holding the volume down + power buttons to enter recovery and it doesn't work.
Adb and fastboot don't work either - the phone isn't on long enough to appear on my PC.
Please let me know if there's anything I can do at this point?
Cheers.
jmh55 said:
Hello,
I installed a custom ROM (ViperOneM8+4.6.1) on my M8,
Click to expand...
Click to collapse
Your device is not a M8 but a different device called M8s ....
Read this thread and get help there if you need to.
http://forum.xda-developers.com/htc-one-m8/help/make-custom-recovery-htc-one-m8s-t3114245
ckpv5 said:
Your device is not a M8 but a different device called M8s ....
Read this thread and get help there if you need to.
http://forum.xda-developers.com/htc-one-m8/help/make-custom-recovery-htc-one-m8s-t3114245
Click to expand...
Click to collapse
Oh dear, I think this is the issue. The ROM I used was for the M8, not the M8s.
Thanks, I'll try posting in that thread.
jmh55 said:
I've tried holding the volume down + power buttons to enter recovery and it doesn't work.
Click to expand...
Click to collapse
There is no button combo that boots into recovery for this device. I believe you mean the button combo to enter bootloader. Folks will often call this recovery, but bootloader and recovery are 2 completely different things (and this is an important distinction), and folks need to stop thinking they are the same.
Since the phone is bootlooping, just hold the vol down button during the next "loop" and you will enter bootloader.
Once in bootloader, then you can select to boot into custom recovery. Then restore your stock nandroid, if you made one before flashing the custom ROM (and you should always make a nandroid of the stock ROM before flashing a custom ROM).
If you didn't make a stock nandroid, you'll need to use RUU or find a stock nandroid that matches your firmware number.
jmh55 said:
Adb and fastboot don't work either - the phone isn't on long enough to appear on my PC.
Click to expand...
Click to collapse
Fastboot only works in bootloader-fastboot mode; adb only works in OS or recovery. So neither is ever going to work while in a bootloop. Get into bootloader as I've described above (and select fastboot); and you should at least be able to use fastboot.
redpoint73 said:
There is no button combo that boots into recovery for this device. I believe you mean the button combo to enter bootloader. Folks will often call this recovery, but bootloader and recovery are 2 completely different things (and this is an important distinction), and folks need to stop thinking they are the same.
Since the phone is bootlooping, just hold the vol down button during the next "loop" and you will enter bootloader.
Once in bootloader, then you can select to boot into custom recovery. Then restore your stock nandroid, if you made one before flashing the custom ROM (and you should always make a nandroid of the stock ROM before flashing a custom ROM).
If you didn't make a stock nandroid, you'll need to use RUU or find a stock nandroid that matches your firmware number.
Fastboot only works in bootloader-fastboot mode; adb only works in OS or recovery. So neither is ever going to work while in a bootloop. Get into bootloader as I've described above (and select fastboot); and you should at least be able to use fastboot.
Click to expand...
Click to collapse
Thanks for the suggestions and advice - I've got the Pandora Rom back on it now and won't be fiddling anymore I think.
I actually managed to get it sorted by holding vol-up and power for a good 15 seconds based on advice from the M8s thread, just in case any one has the same problem and vol-down doesn't solve it: http://forum.xda-developers.com/showpost.php?p=63177320&postcount=658
Thanks again everyone, I'm been amazed by how helpful people on this forum are.
jmh55 said:
I actually managed to get it sorted by holding vol-up and power for a good 15 seconds based on advice from the M8s thread, just in case any one has the same problem and vol-down doesn't solve it: http://forum.xda-developers.com/showpost.php?p=63177320&postcount=658
Click to expand...
Click to collapse
Power+vol up reboots the phone. You stated the phone was already in a bootloop, which means it was already rebooting over and over.
Vol down (just vol down, no need to hold power button) during any reboot will put you into bootloader. If it doesn't, its because you didn't hold vol down long enough.
Hello,
I have a problem; I recently tried to root my device running on Android 6.0 sense 7. I unlocked the bootloader and installed Twrp recovery and then flashed SuperSU zip, after that I wiped the cache and rebooted, but now it's stuck in a boot loop, I can't do anything, also I can't adb into the device. It is stuck on the HTC logo with powered by android below it. My pc recognizes the device I think because it makes the sound but when I try 'adb devices' it says list of devices attached and nothing. also fastboot can't seem to find the device. What do I do?
Have you tried restoring a backup or flashing a custom rom?
JuanArg said:
Have you tried restoring a backup or flashing a custom rom?
Click to expand...
Click to collapse
but how? its stuck in boot loop and I can't turn off the phone
Hold volume up and power button to restart phone from any hang keep holding the buttons for 5 seconds. Or use volume down + power button and same hold for 5 seconds to go to fastboot
Hey
dcf007 said:
Hello,
I have a problem; I recently tried to root my device running on Android 6.0 sense 7. I unlocked the bootloader and installed Twrp recovery and then flashed SuperSU zip, after that I wiped the cache and rebooted, but now it's stuck in a boot loop, I can't do anything, also I can't adb into the device. It is stuck on the HTC logo with powered by android below it. My pc recognizes the device I think because it makes the sound but when I try 'adb devices' it says list of devices attached and nothing. also fastboot can't seem to find the device. What do I do?
Click to expand...
Click to collapse
I also had the same issue but what I did is, I let my device to drain the battery, and then I press the Volume Down + Power and plugin the charger and it gets me to Bootloader ^_^ I don't know what your bootloader combination is but just press them before putting the charger. And oh, DO NOT REMOVE THE CHARGER UNTIL YOU ARE FINISHED FLASHING THE boot.img of your ROM.
it's fixed, flashed stock rom and recovery. Thanks guys
I also have the same problem. Can you provide a link to stock rom and recovery PLEASE. Thanks!!
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Hm, I had this 2 month ago with a S4...
Same thing, I go to my provider he checked the Handy and said I have a defect on my Mainboard... He use dos tools for Handy analysis... I flash stock with Odin, too... Success but no boot...
CarHDRom V.27.3 by Carotix S6edge
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Docmjldds said:
Hold the button combo pwr, vol down and home as if you want to go into download mode, but try to time it that immediately before the download mode screen comes on, use the Vol up, home and pwr combo and keep holding it down, till it goes into recovery. You have to time it so that right begore the download screen lites up you shift to the recovery mode 3 button combo and hold it till it goes into recovery. This works for me and how I do it all the time whether using stock recovery or TWRP.
Click to expand...
Click to collapse
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
nyknight77 said:
Thanks for your suggestion Docmjldds but that didn't work either. I think I timed it within 0.5 second of the download mode screen. I always tried cancelling out of download mode and quickly holding the combo vol up, home, and pwr immediately after it and it that did not work either.
Click to expand...
Click to collapse
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
nyknight77 said:
I have a SM-G925T and it started boot loop today. I tried to get into recovery mode by holding Power+VOL UP+Home but that does nothing. When I tried to go into download mode by holding Power+VOL DOWN+Home, it works fine.
Symptom:
Phone boot loops displaying only the very first Samsung screen with Galaxy s6 edge (no samsung boot animation). Once this very first logo screen comes on, the screen goes black and loops again. Even if I plug the OEM Samsung USB charging cable, screen does not show the battery charging screen, just the same Samsung Galaxy s6 edge screen.
I have already tried the following:
1. Flash stock rom using ODIN, flashed successfully, still boot loop
2. Holding Power+Vol DOWN to reset, still boot loop
3. Flash stock rom using ODIN again, flashed successfully, still boot loop
4. Let battery drain, waited 3 hours for screen to boot loop and battery died, plugged back USB charging cable back, still boot loop
5. Flick the power button many times to loosen any dirt, still boot loop
6. Hold the power button for 1 minute, 2 minute, and 3 minute, still boot loop
Please help, any advice very appreciated!
Click to expand...
Click to collapse
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
Really appreciate your help here. Would flashing TWRP with odin trip knox? I'm afraid to flash anything not stock rom related.
Docmjldds said:
What version Odin?
What version stock ROM?
What version Recovery?
Have you tried to simply install latest TWRP 3.1.0 "twrp-3.1.0-0-zeroltetmo.img.tar"
Click to expand...
Click to collapse
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
PS: Have you tried turning phone off. Then power on and then immediately hold the vol up home pwr buttons combo. That should also get you into recovery mode. But that said, I would still try my last.
---------- Post added at 08:08 PM ---------- Previous post was at 08:04 PM ----------
maxter55 said:
I have the solution for you my friend. Flash TWRP using oding (in download mode), then from TWRP install or flash this rom(for this you need to download the rom, connect your phone to the pc and while you have TWRP open in your screen put the file of the rom in the phone)
Rom right here:
https://forum.xda-developers.com/ga...ied-development/noble-nougat-rom-1-0-t3565293
This works because this rom comes with its own bootloader and kernel.
Click to expand...
Click to collapse
He wants to keep stock. NOT a good idea
Docmjldds said:
Flashing TWRP WILL trip knox. So, if that's a concern to you, then not much more I can tell you about that. BUT.....3.12.3 is latest ODIN. I would use THAT. Then try flashing complete stock firmware from download mode. QC2 being the last. Here is latest ODIN I attached.
Click to expand...
Click to collapse
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
nyknight77 said:
Really appreciate your help also.
I'm using Odin v3.11.1
Tried both stock ROM version
- G925TUVS5EQA2_G925TTMB5EQA2_TMB
- G925TUVU5EQC2_G925TTMB5EQC2_TMB
Stock recovery was flashed successfully as part of ROM above
I've not tried installing TWRP, could you please point me to where I can find it and how to install it? Also, would installing it trip up my knox?
I also flashed recovery.img by itself by extracting that from the ROM and converting it to recovery.tar.md5 using tar-Tool and successfully flashed recovery only but still no difference.
Click to expand...
Click to collapse
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
nyknight77 said:
I used the ODIN 3.12.3 that you posted and flashed QC2 again (Passed/succeeded). Still boot loops.
I can easily get into download mode but not recovery mode. I don't know of a way to power off, just reset by holding power button or (power button and vol down). I just realized how ridiculous this sounds but is there any way to actually power off the phone without loading android and holding power button, and selecting power off? As far as I know, there's only soft reset or hard reset.
I'm pretty sure my hardware buttons work fine since I need to hold power button, vol down, and home at the same time to enter download mode perfectly. Then I have to press volume up button to enter download mode. So all the buttons that's needed to enter recovery mode (power, volume down, and home) works.
Wonder if bad battery can be be the cause? I don't get any charging indicator (screen with battery animation) when I plug phone to USB charger. Seems to be able to hold a charge but not that long, no way for me to check battery percentage though.
Click to expand...
Click to collapse
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
maxter55 said:
It's your only option right now. I was where you were and I have the same phone 925T. I flashed the rom I told you about then I flashed the stock nougat rom that just came out 2 days ago. I'm running the stock nougat and I'm happy at the moment. Battery and performance are great. I tried flashing all of the stock roms using ODIN and nothing would work but flashing that rom I linked you before worked and then I was able to go back to stock. Trip Knox sure but you will have a working phone again.
The reason why I went back to stock is because I need WIFI calling.
---------- Post added at 05:56 AM ---------- Previous post was at 05:46 AM ----------
Before doing all this, if you don't want to void your warranty.
1-Download the stock NOUGAT, flash it using odin and then if it lets you go in recovery mode, factory reset your phone then try to boot. Give it 5-10 minutes to make sure it doesn't actually boot. I know the first boot takes a while so you will be stuck at the t-mobile logo. If after 10 minutes doesn't go on then try number 2.
2-Having the phone in download mode use the software smart switch.
Follow the instructions in this video.
https://www.youtube.com/watch?v=Lwz6bF-aqk4&t=30s
If none of that works, either use your warranty or
Follow the instructions to install TWRP.
https://forum.xda-developers.com/ga...ecovery-official-twrp-galaxy-s6-edge-t3354508
Click to expand...
Click to collapse
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
nyknight77 said:
So I just flashed the latest nougat stock firmware with ODIN. Flashed passed/succeeded. No difference, still boot loop Still cannot get into recovery mode but can get into download mode fine like before.
My phone is out of warranty so I'm just gonna buy a replacement battery off ebay and see if that makes any difference. Hope someone has other ideas. I'll use TWRP as a last resort. Maybe that will work but I don't know how not being able to get into stock recovery would be fixed by installing TWRP custom recovery. I suspect I would not be able to get into TWRP recovery either.
Click to expand...
Click to collapse
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Docmjldds said:
Why are you so concerned about tripping knox, since you are out of warranty anyways. And BTW it's a myth that a rooted phone loses warranty. I have had plenty of my phones covered under warranty and they were ALL rooted. With TWRP installed, you can use the advanced wipe actions to basically factory reset and load either Nougat or MM stock. I am rooted using stock just released Android 7 for TMobile firmware. Odin Firmware. Odin TWRP. Then install anything you like. Yes...knox tripped. Yes, you will lose Samsung Pay. For me not a big deal. Otherwise just fine. The warranty comany has to prove that your act of rooting caused the issue the phone has. Samsung will tell people that phone warranty is voind if rooted. But it's ONLY a line they are told to state. Again, I have used Samsung warranty direct...NOT TMobile and obtained free warranty service and my phones were rooted.
Click to expand...
Click to collapse
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think i would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
nyknight77 said:
The biggest concern about tripping knox for me is that I lose Samsung Pay. It's actually the most useful thing I have on the phone. I can do pretty much every thing on my old phones that I need but it doesn't have samsung pay. I understand it's useless for most people, but for me it's the most important feature.
Do you think I would still have the same problem getting into recovery even if I flashed TWRP? Right now I can't even load stock recovery.
Click to expand...
Click to collapse
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Docmjldds said:
I really have no idea why you are having this issue. The one time my phone was so screwed up was I could ONLY fix by doing a complete factory reset including internal memory and that was via TWRP. Installing TWRP WILL kill Knox, therefore no more Samsung Pay...period. Have you tried smart switch out of curiosity?
Click to expand...
Click to collapse
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
The only thing I can think of is that your setup is so corrupted you basically have no choice here. It's kind of the old adage about knowing it's important to occasionally back up the internal data, but just never get to it. I'm kind of paranoid to every now and then make sure I have copies of stuff around. I know it's zero solace for you, but without getting into recovery mode, there is no way to get to the Internal stuff that I know of. I'm assuming you never used smartswitch to backup or just use a computer to copy paste Internal stuff to a folder for saving.
HMMMM...Password:
ZiDroid.com
Try this stock Recovery. I found a post I made almost two years ago with a link to this file. Use the password to open the file and try ODIN again
nyknight77 said:
I think my problem is worst than what you had before because I cannot even get into recovery mode not just a normal boot loop. This issue is boot loop and not being able to get into recovery mode.
I have not used smart switch yet. I was going to do an emergency software recovery but that would basically just wipe all internal memory and flash the stock rom. I thought I could save some of my data by just flashing stock rom with ODIN, which flashed perfectly every time but still boot loops.
Click to expand...
Click to collapse
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Docmjldds said:
I realize I'm kinda grasping at straws here short of a complete nuke of your setup....but sometimes you have to bite the bullet so to speak
Click to expand...
Click to collapse
Really appreciate your help. I'm starting to think more that it's a bad battery now. Hope that's just it instead of the main board.
I left phone on charge for a few hours (constantly boot looping the whole time). I'm able to power off the phone by holding Power button and Volume down for 10 seconds. Screen is completely off, no boot looping.
Step1: When try to simply turn phone on by holding power button for three seconds, the first samsung galaxy s6 edge logo screen pops up but then goes away and phone looks to be off. Like it's trying to get power from the battery but can't.
Step2: If I keep holding the power button, that first logo screen would turn on and off as if it's a boot loop. If I let go, then phone is off again.
Step3: If I go into download mode and select Cancel (restart phone), it goes into boot loop with only first logo screen again. It loops until I hard reset by holding power button and volume down again for 10 seconds. Then phone is off. Same thing repeats if I go back to Step1 again.