Minix just announced the update version of NEO X8-H, called NEO X8-H Plus.
The Neo x8-h plus base on the amlogic S812-H chip, which can support the h.265 video hardware decoding. besides this, they add the Gigabit Ethernet, 802.11AC wifi on the NEO X8-H PLUS.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How do you think about this device? I will have a review for this model soon.
Let's talk the review, firmware, root, and other questions in this tread.
Im looking to buy one in the next week or so. I really excited about this device. I look forward to your review! Would this device also run the basic launcher as well as the android kitkat launcher? Thanks
pinoy_ako07 said:
Im looking to buy one in the next week or so. I really excited about this device. I look forward to your review! Would this device also run the basic launcher as well as the android kitkat launcher? Thanks
Click to expand...
Click to collapse
From the screenshot, i can say, it should have two launcher , once is basic android launcher, and the other is the Minix launcher.
It's got better wifi that's it
kazzxtrismus said:
It's got better wifi that's it
Click to expand...
Click to collapse
Not quite just the wifi. Also hardware HEVC encoding, a speedier processor, gigabit ethernet...
I would love to take one of these devices for a test-drive! It looks really good, particularly with the added H.265 decoding and wireless AC
DarkscytheX said:
I would love to take one of these devices for a test-drive! It looks really good, particularly with the added H.265 decoding and wireless AC
Click to expand...
Click to collapse
Wonder when they will announce the x9, hopefully not too expensive!
I want to ask 1 question, Had the new ROM for android tv box MINIX X8H yet?
Video Review NEO X8H PLUS
Hello guys!
I want to share with you a good video review of the NEW NEO X8H PLUS
pinoy_ako07 said:
Im looking to buy one in the next week or so. I really excited about this device. I look forward to your review! Would this device also run the basic launcher as well as the android kitkat launcher? Thanks
Click to expand...
Click to collapse
Been using it for a week, it runs like a standard Android box. I installed Nova Launcher on it and it worked fine.
See my full review below:
http://droidhorizon.com/minix-neo-x8-h-plus-review/
---------- Post added at 10:18 AM ---------- Previous post was at 10:00 AM ----------
vemaybaydi said:
I want to ask 1 question, Had the new ROM for android tv box MINIX X8H yet?
Click to expand...
Click to collapse
Its running on 4.4.2
Great video. Thanks so much. Quick question, have you installed plex? Does plex run smoothly? Thanks
root ????
hello is possible root for this model so I have a few days ago and I have not been able to do .thanks and greetings
Streaming TV apps
just few days ago got this device....
No Live Streaming TV app is running on it...tried multiple one (tv tunnel) screen become flicker and doted picture will be on screen.
no idea why it is happening ....
Greetings gentlemen. I'll be buying one of these for myself in the coming days (just waiting for my paycheck), hoping to have it relieve my Raspberry Pi from its current job.
However, my Pi is currently set with Deluge and Flexget so it autodownloads to the respective folders. Could any of you check if installing them is possible on the X-8 Plus? We have some instructions here on how to do it, and when I buy it I will make an attempt anyways, but knowing it in advance would be useful.
What the hell? EVERY other box does at least 1080p...
"**The NEO X8-H Plus only supports standard definition Netflix. Netflix 1080p HD and 4K UHD resolution are not available on any MINIX NEO Series devices."
Thats a BIG bummer
Anyway to root this device and install optware on it ?
elcocinas said:
hello is possible root for this model so I have a few days ago and I have not been able to do .thanks and greetings
Click to expand...
Click to collapse
You can root the MINIX Neo X8H-Plus using the iRoot application (or it's Chinese language parent, vRoot)
http://www.mgyun.com/m/en
Steps:
1. Turn on Developer mode by clicking on the BUILD entry in the ABOUT section in SETTINGS (click it at least 7 times)
2. Enable USB debugging
3. Install iRoot/vRoot on your PC
4. Connect the Neo X8H-Plus using the OTG cable (microUSB to USB cable included in box) to PC.
(Neo X8H-Plus needs to be connected to a display when doing this; also, a mouse would also be helpful)
5. After PC detects Neo X8H-Plus, run the iRoot/vRoot application and click on the CONNECT DEVICE button.
6. When iRoot/vRoot attempts to connect to your Neo X8H-Plus, a security warning will appear on the display. PERMIT access to the application in order for the iRoot/vRoot application to successfully connect to the Neo X8H-Plus
7. Once iRoot/vRoot is connected to your device, click the ROOT button
8. Wait until process is complete
Cheers!
Dark_Az_ said:
Greetings gentlemen. I'll be buying one of these for myself in the coming days (just waiting for my paycheck), hoping to have it relieve my Raspberry Pi from its current job.
However, my Pi is currently set with Deluge and Flexget so it autodownloads to the respective folders. Could any of you check if installing them is possible on the X-8 Plus? We have some instructions here on how to do it, and when I buy it I will make an attempt anyways, but knowing it in advance would be useful.
Click to expand...
Click to collapse
After much tinkering, I was successful in my endeavours. I mostly followed this guide and am now the satisfied owner of a SSH'd with SFTP, Transmission'd and Samba'd X-8Plus.
Grifter357 said:
You can root the MINIX Neo X8H-Plus using the iRoot application (or it's Chinese language parent, vRoot)
http://www.mgyun.com/m/en
Steps:
1. Turn on Developer mode by clicking on the BUILD entry in the ABOUT section in SETTINGS (click it at least 7 times)
2. Enable USB debugging
3. Install iRoot/vRoot on your PC
4. Connect the Neo X8H-Plus using the OTG cable (microUSB to USB cable included in box) to PC.
(Neo X8H-Plus needs to be connected to a display when doing this; also, a mouse would also be helpful)
5. After PC detects Neo X8H-Plus, run the iRoot/vRoot application and click on the CONNECT DEVICE button.
6. When iRoot/vRoot attempts to connect to your Neo X8H-Plus, a security warning will appear on the display. PERMIT access to the application in order for the iRoot/vRoot application to successfully connect to the Neo X8H-Plus
7. Once iRoot/vRoot is connected to your device, click the ROOT button
8. Wait until process is complete
Cheers!
Click to expand...
Click to collapse
Wondering, Anyone tried this method with success?!
eggz2004 said:
Wondering, Anyone tried this method with success?!
Click to expand...
Click to collapse
I can attest to it, it was the method I used to root mine. It does install a couple of chinese apps while doing so, but nothing you can't remove after having it rooted.
Related
So, I have an iPega Bluetooth gamepad that worked fine during the day of 4.2.2-4.3 (on my Nexus 4) but after the KitKat update, it doesn't detect other buttons than the directional pad. Skip forward 3 months, I got my self a Nexus 7 FHD and definitely fell in love with the USB OTG support. Then, I had the idea of plugging my computer gamepad through the USB OTG and the same thing happened, only directional keys are detected.
Did KitKat break some gamepad support? How was playing games with gamepad before the KitKat update? Were you guys able to play games with PC gamepads?
uchihakurtz said:
So, I have an iPega Bluetooth gamepad that worked fine during the day of 4.2.2-4.3 (on my Nexus 4) but after the KitKat update, it doesn't detect other buttons than the directional pad. Skip forward 3 months, I got my self a Nexus 7 FHD and definitely fell in love with the USB OTG support. Then, I had the idea of plugging my computer gamepad through the USB OTG and the same thing happened, only directional keys are detected.
Did KitKat break some gamepad support? How was playing games with gamepad before the KitKat update? Were you guys able to play games with PC gamepads?
Click to expand...
Click to collapse
Hmm, maybe some incompatablity issues. Can you tell us the Gaming Pad Model, and did you use that "iPega" Bluetooth Gaming Pad?
And, do tell that is the iPega designed for phone/tablets only ....?
haidernawaz99 said:
Hmm, maybe some incompatablity issues. Can you tell us the Gaming Pad Model, and did you use that "iPega" Bluetooth Gaming Pad?
And, do tell that is the iPega designed for phone/tablets only ....?
Click to expand...
Click to collapse
Sorry for the late reply, night time. Yeah it's designed specifically for phones and tablets, not for PC. I forgot the model number, I'll check it out when I'm near a computer.
Yeah, before the KitKat update, I could play many games including Asphalt 8, MC 4, NOVA, etc using the Ipega pad but since the update, none works as explained.
Sent from my Nexus 4 using XDA Premium 4 mobile app
uchihakurtz said:
Sorry for the late reply, night time. Yeah it's designed specifically for phones and tablets, not for PC. I forgot the model number, I'll check it out when I'm near a computer.
Yeah, before the KitKat update, I could play many games including Asphalt 8, MC 4, NOVA, etc using the Ipega pad but since the update, none works as explained.
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You might have to hack together a Vendor_*_Product_*.kl file for your device ID, here's an example of a kl file for xbox's controller. You can find the identifier and product on your system logs when the device plugged in. You may even be able to use an existing kl file, just rename it.
mdamaged said:
You might have to hack together a Vendor_*_Product_*.kl file for your device ID, here's an example of a kl file for xbox's controller. You can find the identifier and product on your system logs when the device plugged in. You may even be able to use an existing kl file, just rename it.
Click to expand...
Click to collapse
That is really interesting, I'll go try it out. Thanks man!
So I read the link you attached and as suggested checked out what my USB Game Controller is via logcat and found out it's a "Dragon Rise USB gamepad". I Googled it and found the driver file from this thread (download link here). Extracted the zip file, moved the .kl file into /system/usr/keylayout, changed the permission to 644 (rw-r--r--) and restarted.
It doesn't work on other games than Asphalt 8 and The Amazing Spiderman 2 but at least I can play those two games now, so yeah...
Spoiler
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I haven't tried the Ipega controller yet but will do when I'm in the mood. Thanks again @mdamaged
uchihakurtz said:
So I read the link you attached and as suggested checked out what my USB Game Controller is via logcat and found out it's a "Dragon Rise USB gamepad". I Googled it and found the driver file from this thread (download link here). Extracted the zip file, moved the .kl file into /system/usr/keylayout, changed the permission to 644 (rw-r--r--) and restarted.
It doesn't work on other games than Asphalt 8 and The Amazing Spiderman 2 but at least I can play those two games now, so yeah...
Spoiler
I haven't tried the Ipega controller yet but will do when I'm in the mood. Thanks again @mdamaged
Click to expand...
Click to collapse
There should be an app that spoofs a controller(from many popular ones) then you map buttons/keys/sticks to it.. ie to fix gameloft no mapping options
gwaldo said:
There should be an app that spoofs a controller(from many popular ones) then you map buttons/keys/sticks to it.. ie to fix gameloft no mapping options
Click to expand...
Click to collapse
Yeah there are apps like that such as Tincore Keymapper but the interface is really confusing, I haven't found a user friendly app for that :\
uchihakurtz said:
Yeah there are apps like that such as Tincore Keymapper but the interface is really confusing, I haven't found a user friendly app for that :\
Click to expand...
Click to collapse
Confusing is an understatement lol
I've contacted tincore devs asked them the same question.. no reply..
2014 and no button mapping on mobile games?? oh well.. maybe 2015
gwaldo said:
Confusing is an understatement lol
I've contacted tincore devs asked them the same question.. no reply..
2014 and no button mapping on mobile games?? oh well.. maybe 2015
Click to expand...
Click to collapse
Actually if you buy some good branded controllers, there are specific app for them that lets you do this. Even the SixAxis Controller thing can too, but nah, I don't feel like spending that much money on mobile gaming
The above link for -dragon rise USB .kl file is down can u please upload it ......I am in need of the key layout for my Mi phone....please share it if you have.
This is fot all the people who just bought the m9 to find HTC Sense TV missing and a horrendous app(my opinion , i do not intend to cause a riot.) , Peel Smart TV has taken its place, this is for you , NO more complaining !
METHOD A: (if tv app is not visible in playstore)
download this app (original unmodified, untampered ) TV.apk from the attachment section. (then update it via playstore)
METHOD A: (if tv app is visible in playstore)
you can try installing the tv app from the playstore.
hope i helped ,good:if i did, press the thanks:good
sishirbaid.
sishirbaid said:
This is fot all the people who just bought the m9 to find HTC Sense TV missing and a horrendous app(my opinion , i do not intend to cause a riot.) , Peel Smart TV has taken its place, this is for you , NO more complaining !
METHOD A: (if tv app is not visible in playstore)
download this app (original unmodified, untampered ) TV.apk from the attachment section. (then update it via playstore)
METHOD A: (if tv app is visible in playstore)
you can try installing the tv app from the playstore.
hope i helped ,good:if i did, press the thanks:good
sishirbaid.
Click to expand...
Click to collapse
HTC is shutting down support for the Sense TV app on the 30th of this month (April). For better or worse, eventually you will have to use Peel or a different third party app.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It's definitely for worse. Too bad.
augie7107 said:
It's definitely for worse. Too bad.
Click to expand...
Click to collapse
i know.. peel has all the same stuff but is terribly disorganized... on the other hand TV not only being organised and fluid , has htc's magic powder
download the apk i have attached in the first post , its from sense 7 and is cleaner( you are running an older version)
sishirbaid said:
i know.. peel has all the same stuff but is terribly disorganized... on the other hand TV not only being organised and fluid , has htc's magic powder
download the apk i have attached in the first post , its from sense 7 and is cleaner( you are running an older version)
Click to expand...
Click to collapse
But the app won't work after April 30th.
Exactly, that's the sad part.
augie7107 said:
Exactly, that's the sad part.
Click to expand...
Click to collapse
well, htc will stop service for tv app , you would still be able to use the tv app as a remote , though the content will not be updated anymore...
I started using "Smart IR Remote - AnyMote" a while back. It's not free, but it's well worth the money. Controls anything IR, from TVs to air conditioners.
ajones7279 said:
I started using "Smart IR Remote - AnyMote" a while back. It's not free, but it's well worth the money. Controls anything IR, from TVs to air conditioners.
Click to expand...
Click to collapse
Been using it for about a year, it's incredible and you can set up some really advanced widgets too, they even have a default one that muted my TV when my phone rings. Not cheap though
Anyway I can keep using the app on the HTC m8? I hate peel, it doesn't work at all.
ajones7279 said:
I started using "Smart IR Remote - AnyMote" a while back. It's not free, but it's well worth the money. Controls anything IR, from TVs to air conditioners.
Click to expand...
Click to collapse
Kind of expensive, but all in all a great remote. Thanks for the recommendation.
Hi,
Sorry for a super stupid question - but where's the attachment section? Cant seem to find the apk to download...
thanks in advance!
Zanketsu said:
Hi,
Sorry for a super stupid question - but where's the attachment section? Cant seem to find the apk to download...
thanks in advance!
Click to expand...
Click to collapse
There is no attachment for the apk. The app is no loger supported by HTC.
Zanketsu said:
Hi,
Sorry for a super stupid question - but where's the attachment section? Cant seem to find the apk to download...
thanks in advance!
Click to expand...
Click to collapse
TV app discontinued in April, You have to use Peel or some other Ir blaster app
Yeah I know that, was hoping against hope that a previous version would let me get past the initial setup to the remote control functionality. Really not a fan of Peel. Maybe they'll bring it back to android as they did on the windows phone? Did some complaining on twitter but I'm no't holding my breath...
HTC Sense TV
請問各位:
我的手機是HTC(M8),想要使用原來M8內建的sense tv,但是現在不能使用,請問有辦法可以再開啟使用嗎?
Mod translation:
I ask you:
My phone is HTC (M8), want to use the original M8 built-in sense tv, but now can not be used, is there a way to use it on again
Lee sun said:
請問各位:
我的手機是HTC(M8),想要使用原來M8內建的sense tv,但是現在不能使用,請問有辦法可以再開啟使用嗎?
Mod translation:
I ask you:
My phone is HTC (M8), want to use the original M8 built-in sense tv, but now can not be used, is there a way to use it on again
Click to expand...
Click to collapse
已经过了一个月了,但是我看见中文想帮帮忙。上面他们说到了,今年四月份那个app就已经不能用了,但是HTC Sense TV用的应该就是Peel的基础,所以用Peel Smart Remote应该跟它差不多。他们都在抱怨,但是我还挺喜欢Peel
Mod translation:
It has been a month, but I want to see Chinese help. Above, they said, and in April this year that it has been unable to use the app, but should be the basis Peel HTC Sense TV use, so use Peel Smart Remote should be saying the same. They are complaining, but I kinda like Peel
iarejohnsmith said:
已经过了一个月了,但是我看见中文想帮帮忙。上面他们说到了,今年四月份那个app就已经不能用了,但是htc sense tv用的应该就是peel的基础,所以用peel smart remote应该跟它差不多。他们都在抱怨,但是我还挺喜欢peel
Mod translation:
It has been a month, but I want to see Chinese help. Above, they said, and in April this year that it has been unable to use the app, but should be the basis Peel HTC Sense TV use, so use Peel Smart Remote should be saying the same. They are complaining, but I kinda like Peel
Click to expand...
Click to collapse
htc已经关闭了支持,为电视应用,现在有越来越唉回网上的远程因为htc的服务器不再活跃,它不会再工作
Mod translation:
htc has closed support for TV applications, there are more and alas back online because htc remote server is no longer active, it will not work
Post is an and well what do we have here.....
Well packed.
Lets get started.
Processor 1.2GHz quad-core cortex A53 (64-bit) Allwinner
Storage 8GB or eMMC 16GB eMMC
Memory 1GB or memory 2GB memory
SizeHeight: 1.0 inch (2.6 cm)Length: 4.9 inch (12.4 cm)Width: 3.5 Inch (8.8 cm)
H.265 4K hardware decoding
1080P HDMI output
Support for 1920*1080 resolution
Audio line out/headphone minijack (digital/analog)
HDMI port support multichannel audio output
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Plugged in and on,
Small green LED in the front and Its not to bright.
Remix Logo or F2 to enter recovery
Get greeted with language selection,
Set up WIFI 2.4 GHZ only then check for Update. (system has the Latest version)
The Remix Mini features a capacitive touch power button unlike any PC of its kind. Rather than awkwardly feeling around the back panel for that elusive power button, just gently tap the top of your Mini.
Within seconds you'll be able to start doing what you need to do.
Apply a bit of pressure to the Top of the box or one Tap, Unit goes to Standby mode....Nifty tap again to wake up.
Plugged in K400r Logitech, looking good.
Screen Capture has a resizable/Snap square to capture all/or any of the screen.
This Is going to fun, and it is after a few days
This is a fun box if such a thing can exist, very much like running a MS$ Windows, all similar features with desktop
Installed Apps appear as a shortcut on the desktop.
Right click copy and paste, Close or minimise Apps with corner icons,
Software detected and running in 64 bit mode. Antutu bench test score 2100 64 and 32 bit
WIFI speed Good, as ether,
Did the usual install a heap of apps at once from Play all apps in no lag.
Using apps require one click as we know and using Remix is more Double Click I have found, may be a setting somewhere.
1920 x 1080 test
1280 x 720 test
Circle is the show desktop button.
Flyout window on the right click 3 horizontal lines Lower R/H.
Customise Icons on Lower Task bar as well as Hide lower task bar.
10th November Netflix is now Working.
Plex In and running looking good.
In the Left Corner of the screen there is a back Button for Remix this appears to interfere with apps that have a back button in the same location
Plex and Antutu Video tester so far I have come across.
Changing Resolution 1280 x 720 to 1920 x 1080 requires a restart how
windows 95 is that.
Some minor issues with running certain apps don't like being in a window environment but all will be sorted by the people at JIDE
This O/S could be a big game changer.
http://www.jide.com/en/remixos
What's inside
What's inside the Box
Hi there!!!
I have one it's a fantastic device, but it still have some problems. The worst, in my opinion, it is that third-party applications are not allowed to write in external drives.
Bye
Another review
Here another indepth review from lilputing
http://liliputing.com/2015/12/remix-mini-review-70-android-desktop-pc.html
kas_27_es said:
Hi there!!!
I have one it's a fantastic device, but it still have some problems. The worst, in my opinion, it is that third-party applications are not allowed to write in external drives.
Bye
Click to expand...
Click to collapse
Just letting you know that since the patch 2.0.104 (Build no. 5.1-2015120401) apps with the "WRITE_EXTERNAL_STORAGE" can use the SD or a USB drive.
Deses said:
Just letting you know that since the patch 2.0.104 (Build no. 5.1-2015120401) apps with the "WRITE_EXTERNAL_STORAGE" can use the SD or a USB drive.
Click to expand...
Click to collapse
Absolutely true, I tested this feature yesterday and now the REMIX works like a charm.
now Premium Play (italian app) don't works and Plex stops film's view after 20 seconds and returns to home
Edit. Since the WiFi antenna is covered could it be possible to use a more powerful own WiFi antenna modifying the software?
My Android Desktop setup...
photo
Remix mini on left, Shield TV Pro on right
...best of both worlds on one screen, for when you can't have the best of both worlds on one device
wiking76 said:
now Premium Play (italian app) don't works and Plex stops film's view after 20 seconds and returns to home
Edit. Since the WiFi antenna is covered could it be possible to use a more powerful own WiFi antenna modifying the software?
Click to expand...
Click to collapse
If you are handy with a soldering iron, and working with the connection as seen on the PCB you could attach an external Antenna that may improve performance or check channel allocation maybe find a clearer/less used channel.
o-I-c said:
If you are handy with a soldering iron, and working with the connection as seen on the PCB you could attach an external Antenna that may improve performance or check channel allocation maybe find a clearer/less used channel.
Click to expand...
Click to collapse
Good info but i'm not handy XD
Thanks for the review. Looking for a channel to get these in Australia. Unfortunately doesn't look like they supply to AUS on their website.
Tell me which app can make icons bigger?
I love it!!!!
I can watch Netflix, Twitch and YouTube. Play Hearthstone and MK. Best investment ever! Keep up the great work
Sent from my SM-N920T using Tapatalk
luckylui said:
I love it!!!!
I can watch Netflix, Twitch and YouTube. Play Hearthstone and MK. Best investment ever! Keep up the great work
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
With Wifi or ethernet?
wiking76 said:
With Wifi or ethernet?
Click to expand...
Click to collapse
Currently use wifi at home.
Haven't tried the ethernet yet, but wifi was working fine.
It did have its hiccups at the beginning and once I updated to the latest release it was coming together. I did notice on Twitch that once you clicked on the pop out window it would get stuck on the right corner of my screen, without being able to close out or anything. I would have to quit Twitch and get into it again.. other than that everything was good!
Sent from my SM-N920T using Tapatalk
Greetings
Hey,
Thank you for sharing your experience with Remix Mini. For the best experience, please always make sure your Remix OS is on the latest version. The most recent build is 2.0.111.
Cheers
[email protected]
RemixOS_Cameron said:
Hey,
Thank you for sharing your experience with Remix Mini. For the best experience, please always make sure your Remix OS is on the latest version. The most recent build is 2.0.111.
Cheers
[email protected]
Click to expand...
Click to collapse
Howdy,
So far my Mini is updated to latest release. Looking forward to seeing more updates in the near future! Keep up the great work
P.S. Can you add the ability to tether with a phone? I tried and it has no success. Thank you
Sent from my SM-N920T using Tapatalk
luckylui said:
Currently use wifi at home.
Haven't tried the ethernet yet, but wifi was working fine.
It did have its hiccups at the beginning and once I updated to the latest release it was coming together. I did notice on Twitch that once you clicked on the pop out window it would get stuck on the right corner of my screen, without being able to close out or anything. I would have to quit Twitch and get into it again.. other than that everything was good!
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
After update firmware I've low wifi performance
wiking76 said:
After update firmware I've low wifi performance
Click to expand...
Click to collapse
Could it be your router? I can run my xfinity wifi and my personal one just fine..
Sent from my SM-N920T using Tapatalk
luckylui said:
Could it be your router? I can run my xfinity wifi and my personal one just fine..
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
I've no idea, with smartphone, pc and notebook it works fine
Hey there,
I've just bought a new smart watch gear s2 (samsung) and the gear app installs but wont connect to the watch.
Any ideas? It does work on my wifes samsung s6 phone.
I'm running Lee Droid latest rom
Cheers
It works on our rom and the addon in our hub (-:
I used Gear s2 watch with HTC 10 properly. You have to make sure the Gear s2 watch is reset and is on the screen where it gives you instructions on how to install the app. After installing the app, it will also download 2 more apps(Gear plugin and Samsung accessories - don't remember exact names). Through the main app (Gear Manager) connect to the watch. I have tried my watch with different phones and every time I wanted to connect to another phone I had to do reset in settings.
Nothing has worked. I have installed the viper rom with full factory reset and get these errors. I have also installed the fixed app from the viper hub
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
-----------------------------
Sent from the back of Michael Caine's Mini Cooper S, Italy. Holding on for dear life...
http://cloud.tapatalk.com/s/58caffd0c35c5/Screenshot_20170316-192718.png?
-----------------------------
Sent from the back of Michael Caine's Mini Cooper S, Italy. Holding on for dear life...
Charkatak said:
I used Gear s2 watch with HTC 10 properly. You have to make sure the Gear s2 watch is reset and is on the screen where it gives you instructions on how to install the app. After installing the app, it will also download 2 more apps(Gear plugin and Samsung accessories - don't remember exact names). Through the main app (Gear Manager) connect to the watch. I have tried my watch with different phones and every time I wanted to connect to another phone I had to do reset in settings.
Click to expand...
Click to collapse
What rom are you on?
-----------------------------
Sent from the back of Michael Caine's Mini Cooper S, Italy. Holding on for dear life...
ijob said:
What rom are you on?
-----------------------------
Sent from the back of Michael Caine's Mini Cooper S, Italy. Holding on for dear life...
Click to expand...
Click to collapse
Never changed anything on my HTC 10 US ver. and it is as stock as it can possibly be.
Charkatak said:
Never changed anything on my HTC 10 US ver. and it is as stock as it can possibly be.
Click to expand...
Click to collapse
Samsung gear 2 isn't compatible with stock HTC 10. I ment to buy it, but I had a chance to check it out, and it can't be connected with stock HTC 10 software. You will have to unlock your bootloader and flash a custom ROM if you want it to work
donkeykong1 said:
Samsung gear 2 isn't compatible with stock HTC 10. I ment to buy it, but I had a chance to check it out, and it can't be connected with stock HTC 10 software. You will have to unlock your bootloader and flash a custom ROM if you want it to work
Click to expand...
Click to collapse
I am unlocked and s-off and have tried both Venom Rom(with fixed gear app) and leedroid, both are unable to connect the gear s2
Thanks for any more help
ijob said:
I am unlocked and s-off and have tried both Venom Rom(with fixed gear app) and leedroid, both are unable to connect the gear s2
Thanks for any more help
Click to expand...
Click to collapse
https://forum.xda-developers.com/an...d-samsung-gear-app-android-n-samsung-t3547035
try to install all three apps linked at the bottom of the first page
donkeykong1 said:
Samsung gear 2 isn't compatible with stock HTC 10. I ment to buy it, but I had a chance to check it out, and it can't be connected with stock HTC 10 software. You will have to unlock your bootloader and flash a custom ROM if you want it to work
Click to expand...
Click to collapse
It is not possible that Gear S2 is not compatible with HTC 10. The minimum requirement is Android 4.4 and at lease 1.5GB of RAM. I have had multiple Android phones at the time when I had gear s2 watch in my possession and all of them connected and worked perfectly. If you followed instructions and were pairing through the Gear Manager app then it has to work. Side note: I tested when my phone still had Android 6, maybe that Android 7 is some how isn't working well with the watch.
My wife S2 can pair on my HTC 10, so does the fit 2
make sure beside the gear app you also need to install the plugin
p.s. S2 test when andriod 6.0, fit 2 test on 7.0
j to the 4n said:
https://forum.xda-developers.com/an...d-samsung-gear-app-android-n-samsung-t3547035
try to install all three apps linked at the bottom of the first page
Click to expand...
Click to collapse
Installing these three solved my problem. Many thanks for your help!
The ones I used from the play store wouldn't work though
-----------------------------
Sent from the back of Michael Caine's Mini Cooper S, Italy. Holding on for dear life...
ijob said:
Installing these three solved my problem. Many thanks for your help!
The ones I used from the play store wouldn't work though
-----------------------------
Sent from the back of Michael Caine's Mini Cooper S, Italy. Holding on for dear life...
Click to expand...
Click to collapse
yepp, they are resigned by me to match the modified gear manager.
Charkatak said:
It is not possible that Gear S2 is not compatible with HTC 10. The minimum requirement is Android 4.4 and at lease 1.5GB of RAM. I have had multiple Android phones at the time when I had gear s2 watch in my possession and all of them connected and worked perfectly. If you followed instructions and were pairing through the Gear Manager app then it has to work. Side note: I tested when my phone still had Android 6, maybe that Android 7 is some how isn't working well with the watch.
Click to expand...
Click to collapse
DummyPLUG said:
My wife S2 can pair on my HTC 10, so does the fit 2
make sure beside the gear app you also need to install the plugin
p.s. S2 test when andriod 6.0, fit 2 test on 7.0
Click to expand...
Click to collapse
...it does not work on deodexed custom roms. Therefore my modded apks are required.
j to the 4n said:
It works on our rom and the addon in our hub (-:
Click to expand...
Click to collapse
Is the s health app effected by this? Do u have a fixed version as it won't sync to my gear. I've tried everything and the fitness features are useless without it syncing. Thanks!
Sent from my HTC 10 using Tapatalk
It is my first day back at work with my new S9. I have always found SideSync a handy tool, plug your phone in via USB and it will charge whilst displaying your mobile's display on your PC. I noticed that I couldn't connect via USB as I normally do and WiFi would connect via a hotspot but not our main network.
I have just finished a live chat with Samsung Support and after some testing, I was told:
"Thank you so much for patiently waiting. Upon checking, we do apologise but at Sidesync is not compatible with S9 at the moment. Samsung are working on it as soon as possible for more improvements."
Before contacting samsung, I tried:
-Re-installing SideSync on PC
-Re-Installing Samsung Mobile USB drivers
-Restarting PC
Samsung adviser asked me to try:
From the dialler on your device, enter *#0808#.
Under 'USB', select AP.
Under 'USB Settings', select MTP +ADB.
Soft reboot device
dnmrt said:
It is my first day back at work with my new S9. I have always found SideSync a handy tool, plug your phone in via USB and it will charge whilst displaying your mobile's display on your PC. I noticed that I couldn't connect via USB as I normally do and WiFi would connect via a hotspot but not our main network.
I have just finished a live chat with Samsung Support and after some testing, I was told:
"Thank you so much for patiently waiting. Upon checking, we do apologise but at Sidesync is not compatible with S9 at the moment. Samsung are working on it as soon as possible for more improvements."
Before contacting samsung, I tried:
-Re-installing SideSync on PC
-Re-Installing Samsung Mobile USB drivers
-Restarting PC
Samsung adviser asked me to try:
From the dialler on your device, enter *#0808#.
Under 'USB', select AP.
Under 'USB Settings', select MTP +ADB.
Soft reboot device
Click to expand...
Click to collapse
So there going to be discontinuing SideSync in favor of Samsung Flow from the Galaxy S9 onward
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Camry2731 said:
So there going to be discontinuing SideSync in favor of Samsung Flow from the Galaxy S9 onward
Click to expand...
Click to collapse
I wonder how long it will take them?
special needs guy
hey I am a special needs guy who uses sidesiync to navigate my phone and I just found out that you are not going to make it work on galaxy s9 and I really enjoyed it because it is the only way that can use my phone
I will really appreciate if you did not take it away please
dnmrt said:
I wonder how long it will take them?
Click to expand...
Click to collapse
This sucks. Is sammy flow compatible with mac os?
ssgunner20 said:
This sucks. Is sammy flow compatible with mac os?
Click to expand...
Click to collapse
Doesn't look like it.
Samsung Flow requires Google Play Services whereas Sidesync does not, correct? That's a blow.
flow/sidesync
hi, so i have an s9 and a tab a 10.1 with s-pen(nougat 7.0).
can not use sidesync with s9
can not use flow with tab a (according to play store-not compatible with this version)
whats left? is there anything
thank you
bobwal70 said:
hi, so i have an s9 and a tab a 10.1 with s-pen(nougat 7.0).
can not use sidesync with s9
can not use flow with tab a (according to play store-not compatible with this version)
whats left? is there anything
thank you
Click to expand...
Click to collapse
I have both Flow and SideSync installed in my PC (with Windows 10).
Flow is better than SideSync in almost all the things, but it's not able to mirror the screen yet.
for now i use teamviewer.... waiting for samsung flow ... btw. you can install samsing flow via samsung store. but there is no mirroring option
Flow
inteks said:
for now i use teamviewer.... waiting for samsung flow ... btw. you can install samsing flow via samsung store. but there is no mirroring option
Click to expand...
Click to collapse
But I can not use flow with my tab a 10.1 with spen... I can install flow on my s9 and on my PC.
So how do I sync files between phone and tablet?
Thank you
I recommend Vysor Pro, if you have the cash and need the accessibility now. You need Google Chrome for the install I think, on your Desktop.
I use it, works for what I need to. Lets me control it via mouse & keyboard. Lets you change stream quality rate. Latency is next to nothing on the S9.
Supports Wifi and USB remote-in options.
--
Your other option is to get a DexPad or wait until Samsung Flow supports mirroring.
So... Just upgraded to a new phone. Now Samsung wants to force me to upgrade OS... Work PC, work laptop, home PC. Because Samsung Flow requires Windows 10. Way to go, Samsung. Alienate 43.4% of the PC user base. Or just take a step backwards and lose functionality that I already had with my old phone and current os's. Looks like I'll be trying a different solution this week.
Mac user
And what about Mac users?? Flow only works on PC.
I gave flow a go but it just isn't as good as Sidesync, I would love them to bring it back.
inteks said:
for now i use teamviewer.... waiting for samsung flow ... btw. you can install samsing flow via samsung store. but there is no mirroring option
Click to expand...
Click to collapse
Hey guys, i downloaded v 7.6.0-507 as an apk and installed it on my Galaxy S9. It worked, except that screen mirroring shows phone screen in landscape mode...
Best regards...