I got a tab S SMT 800 of course the first thing I did was to root the tablet with Odin3 I was in a hurry even did not apply the system update. Now when I try I get "The operating system on your device has been modified in an unauthorized way bla bla" How can I apply this OTA without re flashing a stock firmware?
Im not sure if you can. But there is a way to set your system status back to officail with root. Doing this method will allow to update with the ota bit i can nit confirm if the ota update will install properly. First download xposed installer, and install it. Then search for a module in xposed called wanam xposed and download and install and reboot. Then open the wanam xposed app and go tab secuirty hacks and tap fake system status till it saids official. Then now just reboot. Now try the ota update. It may install, it may not. Hope this helps
DUHAsianSKILLZ said:
Im not sure if you can. But there is a way to set your system status back to officail with root. Doing this method will allow to update with the ota bit i can nit confirm if the ota update will install properly. First download xposed installer, and install it. Then search for a module in xposed called wanam xposed and download and install and reboot. Then open the wanam xposed app and go tab secuirty hacks and tap fake system status till it saids official. Then now just reboot. Now try the ota update. It may install, it may not. Hope this helps
Click to expand...
Click to collapse
Thank you. I followed your instructions, but it did not work, It did removed the nasty "The operating system on your device has been modified in an unauthorized way bla bla"after it re download the update but came back with Failed to update software.
I ran into this thread on the S5 http://forum.xda-developers.com/showthread.php?t=2728568&page=2 where people succeed by using the stock tar with odin
but do I do not where to find the stockcar for the tab S SMT 800
guliver6 said:
Thank you. I followed your instructions, but it did not work, It did removed the nasty "The operating system on your device has been modified in an unauthorized way bla bla"after it re download the update but came back with Failed to update software.
I ran into this thread on the S5 http://forum.xda-developers.com/showthread.php?t=2728568&page=2 where people succeed by using the stock tar with odin
but do I do not where to find the stockcar for the tab S SMT 800
Click to expand...
Click to collapse
Did you check the Sammobile website first?
Reckoning said:
Did you check the Sammobile website first?
Click to expand...
Click to collapse
Nothing for USA there the closest is Canada
guliver6 said:
Nothing for USA there the closest is Canada
Click to expand...
Click to collapse
I think usa is XAR or celluar south. Idk
DUHAsianSKILLZ said:
I think usa is XAR or celluar south. Idk
Click to expand...
Click to collapse
I got this \T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 but I am getting the RED flag fail in odin
guliver6 said:
I got this \T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 but I am getting the RED flag fail in odin
Click to expand...
Click to collapse
What does odin say when falshing it. Like the text box in odin when it flash it.
DUHAsianSKILLZ said:
I think usa is XAR or celluar south. Idk
Click to expand...
Click to collapse
DUHAsianSKILLZ said:
What does odin say when falshing it. Like the text box in odin when it flash it.
Click to expand...
Click to collapse
Here the Odin reply:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
guliver6 said:
Here the Odin reply:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T800XXU1ANK1_T800XAR1ANI1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
Click to expand...
Click to collapse
I honestly have no idea whu it does that. People been havent problems with odin. Can your tab still boot? It seems like it didnt even flash. Maybe a bad drivers.
DUHAsianSKILLZ said:
I honestly have no idea whu it does that. People been haven't problems with odin. Can your tab still boot? It seems like it didn't even flash. Maybe a bad drivers.
Click to expand...
Click to collapse
Good news this time everything went smooth did not have to reset factory and the tablet says
"Software update: the latest updates have already been installed", just lost the root but I flashed the auto root again and its is perfect.
Thank you everybody for your help.
guliver6 said:
Good news this time everything went smooth did not have to reset factory and the tablet says
"Software update: the latest updates have already been installed", just lost the root but I flashed the auto root again and its is perfect.
Thank you everybody for your help.
Click to expand...
Click to collapse
So what did you do? Did you flash it again? Or exactly what did you do to fix it? I just wanna know since whenever andriod l is out.. I can flash it correctly.
DUHAsianSKILLZ said:
So what did you do? Did you flash it again? Or exactly what did you do to fix it? I just wanna know since whenever andriod l is out.. I can flash it correctly.
Click to expand...
Click to collapse
Honestly not sure,I turned off the tablet hold the 3 buttons to put int in download mode and the the odin worked its magic just waiting for android 5.0 now
guliver6 said:
Honestly not sure,I turned off the tablet hold the 3 buttons to put int in download mode and the the odin worked its magic just waiting for android 5.0 now
Click to expand...
Click to collapse
Probably out of the topic but since I started this thread I need to give an explanation
If you wander why Guliver6 is currently disabled it is because on XDA
I created a double account by error so on my demand the previous account show disabled, so from now on I will use only guliver365 for subsequent follow up.
guliver6 said:
Honestly not sure,I turned off the tablet hold the 3 buttons to put int in download mode and the the odin worked its magic just waiting for android 5.0 now
Click to expand...
Click to collapse
Probaly needed to reconnect the cable again. Happens all the time with my ipod and ipad.
app
There is a app that will hide your root. it works very well.
Its named hidemyroot and works without reboot. :good:
Related
Hi my friends Bell S3 crashed yesterday and I when it is going into recovery this is what it is displaying (see attached image) I think I need a the pit file to reflash, I tried just the md5 file but it errors out
Did you try the factory reset option ?
Nervous_Jester said:
Hi my friends Bell S3 crashed yesterday and I when it is going into recovery this is what it is displaying (see attached image) I think I need a the pit file to reflash, I tried just the md5 file but it errors out
Click to expand...
Click to collapse
the.teejster said:
Did you try the factory reset option ?
Click to expand...
Click to collapse
I wanted to try and keep the data, but at this point I will give it a try
Nervous_Jester said:
I wanted to try and keep the data, but at this point I will give it a try
Click to expand...
Click to collapse
Still having same issues does anyone have the pit file for the Canadian S3 ?
Did you try re-flashing a stock Bell ROM? If it was running stock 4.3, do not try to flash anything older than 4.3.
I'm in the same boat and require a PIT file for my Bell 16Gb S3.
When I try to flash the stock image in ODIN I get the following :
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747MVLUEMK5_I747MOYCEMK5_I747MVLUEMK5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Did you try flashing a stock ROM from sammobile? You have the latest drivers installed and Odin 3.07?
I use Odin 3.07 on my i747m to flash back to stock Bell ROM all the time and haven't run into your problem.
Are you selecting only F.Reset Time?
audit13 said:
Did you try flashing a stock ROM from sammobile? You have the latest drivers installed and Odin 3.07?
I use Odin 3.07 on my i747m to flash back to stock Bell ROM all the time.
Click to expand...
Click to collapse
Yes. That's exactly what I tried to do and have done it successfully in the past without any issue.
Here is my specific post for help with details:
http://forum.xda-developers.com/showthread.php?t=2725985
the.teejster said:
Yes. That's exactly what I tried to do and have done it successfully in the past without any issue.
Here is my specific post for help with details:
http://forum.xda-developers.com/showthread.php?t=2725985
Click to expand...
Click to collapse
Are you selecting any options other than F.Reset Time?
I would download your md5 file again from sammobile sounds and looks like a bad file to me also make sure u have a good USB cable many times that can be a problem
Sent from my thl T11 using Tapatalk
jimchee said:
I would download your md5 file again from sammobile sounds and looks like a bad file to me also make sure u have a good USB cable many times that can be a problem
Sent from my thl T11 using Tapatalk
Click to expand...
Click to collapse
I appreciate the replies but the file is good as i used it before, so is the cable as I use it all the time.
Something bad has happened with my phone as it's now it's actually hard bricked (won't power on or go into download mode. indicator light is red when plugged in w/o battery) and it might be the result of internal memory failure.
I'm trying the debrick process now as a lost option for me. If that doesn't work I may tried to get it jtagged.
When mine did that I was able to recover with sdcard method but it took me many many tries to get it to write correctly. If that doesn't work then JTAG is next option
Sent from my thl T11 using Tapatalk
jimchee said:
When mine did that I was able to recover with sdcard method but it took me many many tries to get it to write correctly. If that doesn't work then JTAG is next option
Sent from my thl T11 using Tapatalk
Click to expand...
Click to collapse
I just finished my 3rd try to get the debrick img to write. Very frustrating as it take an hour to write and say successful in the end.
But the contents on the card so change or get overridden. I'm going to try on a different computer tonight. I'm determined to get the card written with the img and if that doesn't work then it's jtag.
You just have to keep trying, it took me hundreds of tries to get it to finally write it correctly, when I finally got it correct I couldn't read it on my computer, before that it was showing as a series of folders.
Sent from my thl T11 using Tapatalk
jimchee said:
You just have to keep trying, it took me hundreds of tries to get it to finally write it correctly, when I finally got it correct I couldn't read it on my computer, before that it was showing as a series of folders.
Sent from my thl T11 using Tapatalk
Click to expand...
Click to collapse
I got the Debrick image written and my phone boots from it into download mode. Unfortunately I still cannot write the stock image. It fails to write because of the missing PIT file. So I am at a loss.
Hello Please if possible be very Noob friendly with your instructions, thanks
Ok I have a rooted Samsung Galaxy S3 AT&T on Firmware 4.3
So I noticed the 4.4.2 Update came out and i really want to update to it but I couldn't OTA because it would say update failed later discovered this is because my S3 is rooted
Now I am in the middle of trying to unroot my galaxy s3 and am very confused i tried doing backup and reset obviously that didnt work i am very confused on how this Odin software works so if you someone could give me very noob specific directions it would be greatly appreciated!
Thanks in Advance
Just open the SuperSU app and select Full Unroot. Let it do its thing and you're unrooted.
Or follow enewman17's thread for how to update.
I believe unrooting will only be successful if none of the AT&T apps were removed from the device. I forgot about that point and I had to flash the 4.3 stock image in order to successfully install the OTA update to 4.4.2. The OTA will try to patch all that ATT bloat during installation; if its not there it will fail.
DocHoliday77 said:
Just open the SuperSU app and select Full Unroot. Let it do its thing and you're unrooted.
Or follow enewman17's thread for how to update.
Click to expand...
Click to collapse
Yah i already did that but it would still fail the update at 24%
mwrobe1 said:
I believe unrooting will only be successful if none of the AT&T apps were removed from the device. I forgot about that point and I had to flash the 4.3 stock image in order to successfully install the OTA update to 4.4.2. The OTA will try to patch all that ATT bloat during installation; if its not there it will fail.
Click to expand...
Click to collapse
Could you please give me a download link or something to the 4.3 stock image for odin?
Everytime i download one it always some weird files that i do not know how to utilize through odin
So if you could give me a stock 4.3 that would be great thanks
nkhaira said:
Could you please give me a download link or something to the 4.3 stock image for odin?
Everytime i download one it always some weird files that i do not know how to utilize through odin
So if you could give me a stock 4.3 that would be great thanks
Click to expand...
Click to collapse
I used this method in post #1 to go back to stock 4.3: http://forum.xda-developers.com/showthread.php?t=2565972
Contrary to other posts...I only had Auto Reboot checked and that worked for me.
This will also wipe all data from your device...make sure you backup pics/vids/contacts/etc. before you do this.
After you take the OTA update, I can also confirm that TowelRoot will successfully root the ATT GS3 running KitKat. Although the documentation says no reboot is required...I needed a reboot after rooting with towelroot.
mwrobe1 said:
I used this method in post #1 to go back to stock 4.3: http://forum.xda-developers.com/showthread.php?t=2565972
Contrary to other posts...I only had Auto Reboot checked and that worked for me.
This will also wipe all data from your device...make sure you backup pics/vids/contacts/etc. before you do this.
After you take the OTA update, I can also confirm that TowelRoot will successfully root the ATT GS3 running KitKat. Although the documentation says no reboot is required...I needed a reboot after rooting with towelroot.
Click to expand...
Click to collapse
But isnt that for the Sprint Galaxy s3
I have the SGH-i747 AT&T LTE USA Version?
nkhaira said:
But isnt that for the Sprint Galaxy s3
I have the SGH-i747 AT&T LTE USA Version?
Click to expand...
Click to collapse
My sincerest apologies. Correct. I used that link for you because the instructions were clear and concise. The firmware download should be good from here: http://stockroms.net/file/GalaxyS3/SGH-I747/StockROMS.net-SGH-I747_ATT_1_20120522193451.zip
mwrobe1 said:
My sincerest apologies. Correct. I used that link for you because the instructions were clear and concise. The firmware download should be good from here: http://stockroms.net/file/GalaxyS3/SGH-I747/StockROMS.net-SGH-I747_ATT_1_20120522193451.zip
Click to expand...
Click to collapse
Just to make sure this is the file i put in odin so i can go back to stock 4.3 update (non rooted) and update OTA to 4.4.2 right?
nkhaira said:
Just to make sure this is the file i put in odin so i can go back to stock 4.3 update (non rooted) and update OTA to 4.4.2 right?
Click to expand...
Click to collapse
Correct...make sure you put your phone in download mode as well (Hold down Volume Down, Center Home, and Power buttons together for about 10 seconds...When your screen turns off, let go of the Power button but keep holding down Volume Down and Center Home buttons....When you see the warning screen, hit Volume Up button...Connect a microUSB cable from your phone to computer...Run Odin...click on “PDA”, then choose the file you downloaded...click on Start once Odin "loads" the file...wait 10-15 minutes for the flash too occur...after coming back from a reboot you should be on stock 4.3)
mwrobe1 said:
Correct...make sure you put your phone in download mode as well (Hold down Volume Down, Center Home, and Power buttons together for about 10 seconds...When your screen turns off, let go of the Power button but keep holding down Volume Down and Center Home buttons....When you see the warning screen, hit Volume Up button...Connect a microUSB cable from your phone to computer...Run Odin...click on “PDA”, then choose the file you downloaded...click on Start once Odin "loads" the file...wait 10-15 minutes for the flash too occur...after coming back from a reboot you should be on stock 4.3)
Click to expand...
Click to collapse
Thank you for being responsive and helpful
I have started the file download i have slow internet speed at my house but it should download in 30 minutes and in a hour i will update this thread if it worked thanks!
mwrobe1 said:
Correct...make sure you put your phone in download mode as well (Hold down Volume Down, Center Home, and Power buttons together for about 10 seconds...When your screen turns off, let go of the Power button but keep holding down Volume Down and Center Home buttons....When you see the warning screen, hit Volume Up button...Connect a microUSB cable from your phone to computer...Run Odin...click on “PDA”, then choose the file you downloaded...click on Start once Odin "loads" the file...wait 10-15 minutes for the flash too occur...after coming back from a reboot you should be on stock 4.3)
Click to expand...
Click to collapse
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALEM_I747ATTALEM_I747UCALEM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
That is the error message i am getting.. when i am trying this
nkhaira said:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I747UCALEM_I747ATTALEM_I747UCALEM_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
That is the error message i am getting.. when i am trying this
Click to expand...
Click to collapse
I'll try to locate the exact MD5 I used and give you a link later today/this week. Sorry for the trouble.
mwrobe1 said:
I'll try to locate the exact MD5 I used and give you a link later today/this week. Sorry for the trouble.
Click to expand...
Click to collapse
Ok As soon as possible would be appreciated currently this is my only phone and i need to use it and I factory reset it yesterday thinking it would get rid of the root i would like to install all my apps and everything as soon as possible thanks
Your Odin flash failed because you tried to flash a much older firmware. LEM. You need to flash the 4.3 firmware. You can use this thread. http://forum.xda-developers.com/showthread.php?t=2722660
Enewman17 has one too I think. Not sure where exactly right now though.
DocHoliday77 said:
Your Odin flash failed because you tried to flash a much older firmware. LEM. You need to flash the 4.3 firmware. You can use this thread. http://forum.xda-developers.com/showthread.php?t=2722660
Enewman17 has one too I think. Not sure where exactly right now though.
Click to expand...
Click to collapse
Thanks for your reply So since this in too many different files what do i do to combine them (noob)? i know its something to the extent of extracting them into one folder?
Could you give me instructions on that
DocHoliday77 said:
Your Odin flash failed because you tried to flash a much older firmware. LEM. You need to flash the 4.3 firmware. You can use this thread. http://forum.xda-developers.com/showthread.php?t=2722660
Enewman17 has one too I think. Not sure where exactly right now though.
Click to expand...
Click to collapse
Ok i got all the files combined now i see a csc a AP file and alot of the file catergories from Odin do i only need the AP file for PDA or do i need to insert each corresponding file into each corresponding category in Odin?
I don't have this device so its apparently a little different than I'm used to in this regard. Check post 13 of that thread to see if that helps. Otherwise someone more familiar with that particular process will need to chime in.
DocHoliday77 said:
I don't have this device so its apparently a little different than I'm used to in this regard. Check post 13 of that thread to see if that helps. Otherwise someone more familiar with that particular process will need to chime in.
Click to expand...
Click to collapse
Thank You So much!!
Sorry for late reply but the download you sent me worked and after 10 minutes i was on stock 4.3 upgraded to 4.4.2 without any problems!!!
THANKS!!!
I was on 4.1.2 stock firmware
I downloaded an aosp rom http://forum.xda-developers.com/showthread.php?t=2522959 , then i wanted to flash a stock-based rom 4.2
but it got me in a bootloop
my problem is that I cant change from an aosp rom to a stock one, I tried flashing 4.4.2 roms but bootloop again,but I think it is because my recovery is old
I want to change to a stock-based rom
second problem
every aosp rom I flashed was JB. None gave me mobile internet access (3g), I have the signal bar(triangle) empty but I can call and receive phone calls, but I cant use mobile network... I tried changing chips, and changing the place of the chips, same problem.
Hope someone helps
stevenson97 said:
I was on 4.1.2 stock firmware
I downloaded an aosp rom http://forum.xda-developers.com/showthread.php?t=2522959 , then i wanted to flash a stock-based rom 4.2
but it got me in a bootloop
my problem is that I cant change from an aosp rom to a stock one, I tried flashing 4.4.2 roms but bootloop again,but I think it is because my recovery is old
I want to change to a stock-based rom
second problem
every aosp rom I flashed was JB. None gave me mobile internet access (3g), I have the signal bar(triangle) empty but I can call and receive phone calls, but I cant use mobile network... I tried changing chips, and changing the place of the chips, same problem.
Hope someone helps
Click to expand...
Click to collapse
1. Backup your EFS..
2. Flash stock ROM from sammobiles using ODIN.
3. Root it. Flash latest recovery and take Nandroid backup of your stock ROM.
4. Now try flashing different ROMs according to your taste.
Trilochanaaya said:
1. Backup your EFS..
2. Flash stock ROM from sammobiles using ODIN.
3. Root it. Flash latest recovery and take Nandroid backup of your stock ROM.
4. Now try flashing different ROMs according to your taste.
Click to expand...
Click to collapse
Could you please support me with links for everything cause I'm kinda a newbie
stevenson97 said:
Could you please support me with links for everything cause I'm kinda a newbie
Click to expand...
Click to collapse
Yes. U r most welcome. Tell me what links u need, I shall provide.
Trilochanaaya said:
Yes. U r most welcome. Tell me what links u need, I shall provide.
Click to expand...
Click to collapse
I downloaded this firmware http://www.sammobile.com/firmwares/3/?download=30838 and flashed it as you said
odin showed that it succeeded
afterwards, i only got the first screen, it looked like whenever it tries to turn on, it restarts, I only got the samsung grand duos screen, nothing more
and I couldnt access to the recovery nor flash a recovery
in download mode, it shows :system status custom
!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm vission
! [ ]
!!!!!!!!!!!!!!!!!!!!!
what do you say to that?:crying:
stevenson97 said:
I downloaded this firmware http://www.sammobile.com/firmwares/3/?download=30838 and flashed it as you said
odin showed that it succeeded
afterwards, i only got the first screen, it looked like whenever it tries to turn on, it restarts, I only got the samsung grand duos screen, nothing more
and I couldnt access to the recovery nor flash a recovery
in download mode, it shows :system status custom
!!!!!!!!!!!!!!!!!!!!!
! Current eMMC firm vission
! [ ]
!!!!!!!!!!!!!!!!!!!!!
what do you say to that?:crying:
Click to expand...
Click to collapse
I hope u have followed the instructions of flashing stock ROM. Remove the battery and insert after 10-15 seconds. Now enter recovery mode & do factory reset. Now ur phone should bootup. Current eMMC version is a common message while entering stock recovery.
---------- Post added at 04:15 PM ---------- Previous post was at 04:13 PM ----------
PM me if u r having hangouts or whatsapp.
Now ur device is in soft bricked state. Be cautious and don't mess up further.
https://drive.google.com/uc?id=0B3qYFBKKL2hiVmRPanpVd2w3Vjg
Here is the link for ur country version 4.1.2. Good luck.
Trilochanaaya said:
https://drive.google.com/uc?id=0B3qYFBKKL2hiVmRPanpVd2w3Vjg
Here is the link for ur country version 4.1.2. Good luck.
Click to expand...
Click to collapse
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9082XXAMC7_I9082OJVAMC1_I9082XXAMC4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Hi guys, i just purchased the at&t samsung galaxy tab s and got it unlocked. I'm loving it so far, however one thing annoy me is att get rid of the stock phone call and messaging feature. So i wonder if the international lte rom has that option, so i can make phone call and text?
BADBOY1412 said:
Hi guys, i just purchased the at&t samsung galaxy tab s and got it unlocked. I'm loving it so far, however one thing annoy me is att get rid of the stock phone call and messaging feature. So i wonder if the international lte rom has that option, so i can make phone call and text?
Click to expand...
Click to collapse
if you have the 10.5 LTE, I have uploaded latest stock T805 firmware here:
http://forum.xda-developers.com/showthread.php?t=2902557
just flash using ODIN.
Tapatalked from my GALAXY S5
[email protected] said:
if you have the 10.5 LTE, I have uploaded latest stock T805 firmware here:
http://forum.xda-developers.com/showthread.php?t=2902557
just flash using ODIN.
Tapatalked from my GALAXY S5
Click to expand...
Click to collapse
Thanks, will it be compatible with my tablet? I dont want to brick it, also do i need root before flashing the rom?
BADBOY1412 said:
Thanks, will it be compatible with my tablet? I dont want to brick it, also do i need root before flashing the rom?
Click to expand...
Click to collapse
what tablet do you have? no you don't need root.
here is a guide that you can use
http://androidxda.com/flash-samsung-stock-rom-using-odin
ODIN: https://www.google.se/url?sa=t&rct=...=RK0ekg44IHkrmWq59-3jkg&bvm=bv.77648437,d.bGQ
[email protected] said:
what tablet do you have? no you don't need root.
here is a guide that you can use
I have the AT&t version of the galaxy tab s 4gLTE, modelSM- T807A.So i can just flash the T805 rom on top of my existing rom?
Click to expand...
Click to collapse
BADBOY1412 said:
[email protected] said:
what tablet do you have? no you don't need root.
here is a guide that you can use
I have the AT&t version of the galaxy tab s 4gLTE, modelSM- T807A.So i can just flash the T805 rom on top of my existing rom?
Click to expand...
Click to collapse
well it should work, same Exynos 5420 SoC, so just flash it
turn off your tablet, put it on download mode by holding down the home button + volume down and power until you see download mode.
Click to expand...
Click to collapse
[email protected] said:
BADBOY1412 said:
well it should work, same Exynos 5420 SoC, so just flash it
turn off your tablet, put it on download mode by holding down the home button + volume down and power until you see download mode.
Click to expand...
Click to collapse
i tried to flash it with oDin but it failed,i think it has something to do with the MD5,it fail. The status is Leave CS after check MD5,and then fail when i clicked start
Click to expand...
Click to collapse
BADBOY1412 said:
[email protected] said:
i tried to flash it with oDin but it failed,i think it has something to do with the MD5,it fail. The status is Leave CS after check MD5,and then fail when i clicked start
Click to expand...
Click to collapse
hmm, strange, I used it yesterday and flashed my T805, do you choose PDA in ODIN? also do you get the message that your tablet is added in ODIN?
also your quotes looks ****ed up
you can also try to re-download the file again.
Click to expand...
Click to collapse
so you flash your t805 tablet with the t805 rom? i think it failed bc of the different variant. My tab s is t807a so maybe the MD5 doesnt match. Thanks alot for your effort though
BADBOY1412 said:
so you flash your t805 tablet with the t805 rom? i think it failed bc of the different variant. My tab s is t807a so maybe the MD5 doesnt match. Thanks alot for your effort though
Click to expand...
Click to collapse
yes, but try to download the ROM again and see if it works.
[email protected] said:
yes, but try to download the ROM again and see if it works.
Click to expand...
Click to collapse
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> T805XXU1ANH1_T805XEF1ANH1_T805XXU1ANF6_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Thats the message i received
hmm, it seems that something is blocking it from flashing, maybe there is something with the T807A that don't allow other stock ROMs to be flashed
Hi everyone
Some people have information about a Samsung Galaxy S4 SGH-M919V
My phone carrier is Videotron. A Quebec telecommunication compagny.
After checking I have found nothing about this phone and how to root it.
Thanks for your help.
I appreciate.
Android Version : 4.4.2
Modèle : SGH-M919V
Version de la baseband : m919vvlufnh3
Version Kernel : 3.4.0-2588682
Its the the same methods as the M919. Towelroot or cf-auto root should work. You may want to change the title of the thread, the way you wrote it makes it seem as if you're posting a guide to root and giving info about it
serio22 said:
Its the the same methods as the M919. Towelroot or cf-auto root should work. You may want to change the title of the thread, the way you wrote it makes it seem as if you're posting a guide to root and giving info about it
Click to expand...
Click to collapse
Thanks a lot Serio22 for the answer. I will try Towelroot or cf-auto.
Sorry for the title. My English is not very good. I will try another title.
Thanks again !!
Hi !
I have the exact informations as you, sgh-m919v, videotron...
I tried Motochopper but doesn't work. I tried Towelroot but... doesn't work.
Tonight I tried with CF-Autoroot/Odin(sgh-M919 files) and guess what... didn't work !!!
I'm kind of pretending there is no way to get this device rooted, wich sucks a lot.
Have anyone found anything on this subject, or have this device and successfully rooted it ?
Thanks !
Cf auto root will work, if your running 4.4.4 you need a newer version of odin, version 3.0.9 should work.
Pp.
Hmmm I have the 4.4.2 version. I tried with odin 3.0.7 AND 3.0.9 and both didn't work :-/
Sent from my SGH-M919V using XDA Free mobile app
earsblower said:
Hmmm I have the 4.4.2 version. I tried with odin 3.0.7 AND 3.0.9 and both didn't work :-/
Sent from my SGH-M919V using XDA Free mobile app
Click to expand...
Click to collapse
You need to be more specific. Just saying it doesn't work says nothing about the problem
Ok, i installed Towelroot on my phone, and the result was : your phone is not supported.
I got Motochopper, plugged in my phone on my PC with windows 7 (yes I do have the latest usb drivers for my s4) and when I press the start button to start procedure it says : Deamon successfully started, then nothing happens. Like nothing. On my phone and on my PC. I tried it multiple times and even waited 1 hour and nothing shows up. So it didn t work too.
Then I downloaded Cf autoroot files for sgh-m919 (t mobile) which ive read somewhere it should work but no. It does show Added ! And Com:4 in Odin (3.0.7 and 3.0.9 versions tested) so my device is ok but the result is : Failed !
Of course, my phone was set in download mode (volume down + home + power buttons)
I run Android Kit Kat 4.4.2 my carrier Is videotron in Canada. My bad if its not well explained and i lack informations as I am not good with all this, and I really appreciate you taking the time to help out with my case !
Thanks a lot
Sent from my SGH-M919V using XDA Free mobile app
First method you posted doesn't work on all 4.4.2 firmwares so your devices is likely not supported as it stated. Second method is outdated. What is the error you get with Odin? You can also try flashing twrp and flash newest supersu to gain root
serio22 said:
First method you posted doesn't work on all 4.4.2 firmwares so your devices is likely not supported as it stated. Second method is outdated. What is the error you get with Odin? You can also try flashing twrp and flash newest supersu to gain root
Click to expand...
Click to collapse
Here is the journal from Odin :
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jfltetmo-jfltetmo-sghm919.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
So I guess the error is "No PIT partition"...
As for flashing TWRP and getting the last superSU, I do remember using this on my Galaxy Nexus a while ago but I don't know how all this works.
Thanks again for your time !
Yeah pit error. Try the twrp method. Flash twrp with Odin and then flash newest supersu zip
serio22 said:
Yeah pit error. Try the twrp method. Flash twrp with Odin and then flash newest supersu zip
Click to expand...
Click to collapse
Thanks again for the suggestion, so I tried it and it failed too.
I flashed TWRP recovery with Odin and the result was Passed! ( I used the latest TWRP for SGH-M919 .tar file on the twrp site, version 2.8.4.0 released january 13 2015)
then when I boot in recovery mode here is the result :
No command ( with the android guy chest-open) and my options are :
-Reboot system now
-Apply update from ADB
-Apply update from external storage
-wipe data/factory reset
-wipe cache partition
-Apply update from cache
Below it's writing in yellow :
#manual mode#
-- Aplling Multi-CSC...
Applied the CSC-code : VIR
Successfully applied multi-CSC
Now I don't know what to do...
Thanks for your time
Don't let it boot into the system once you flash it or it will replace it with stock recovery. Once you flash twrp and it passes, pull battery and reboot straight into recovery
serio22 said:
Don't let it boot into the system once you flash it or it will replace it with stock recovery. Once you flash twrp and it passes, pull battery and reboot straight into recovery
Click to expand...
Click to collapse
Oh my god you are the king !! Guess what ? It worked !!!!!!! Just as you said !!!! Thank you very much !!!!!! Can't say how much im happy you helped me !! Thanks x100000
Sent from my SGH-M919V using XDA Free mobile app