Develop Bugs

another brick (?) story and help wanted

hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!

piepsys said:
hi there,
i was on HYD52ROM V2 for the Ascend P6.
I decided to do an upgrade to the KitKat Version of HYD52ROM. So i installed the TouchRecoveryInstaller-v1_01.apk and rebooted. I had the newest file of the Rom on my SD-Card. I wiped the phone and the dalvik also.
Then it said, that there is an error while installing the KitKat Rom.
I thought "no problem" - i had the old V2 on my sd card also.
Now only the bootscreen "Huawei Ascend" appears and nothing more. I can switch off the phone while hitting all the buttons but nothing more. Is there any possibility to get it back working?
If so, please a short step by step will do it.
Thanks!
Click to expand...
Click to collapse
Only soft bricked, install stock recovery.
http://forum.xda-developers.com/showpost.php?p=51066019&postcount=14

ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
two more questions...
1) is it important which original firmware version?
2) i have downloaded the "Huawei Update Extractor" ... what to do with it? Do you have a link for the stock recovery? I haven´t read s.th. about it :-/
Regards

piepsys said:
ok thank you for your answer...
means i have to put the "UPDATE.APP" in the DLOAD-folder on the sd?
Click to expand...
Click to collapse
Just updated my last post same time when you wrote.. check the link

ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY

piepsys said:
ok thank you. i will check the link
The problem i have ... how to -> Put your device in fastboot mode ( > adb reboot bootloader )
Never done this BIG SORRY
Click to expand...
Click to collapse
Download http://forum.xda-developers.com/showthread.php?t=2588979
Press y and then n
Then download http://www.androidfilehost.com/?fid=23252070760973625
and extract it to c:\adb then press sift and right click and go to open commandwindow here
then write: adb reboot bootloader
then: fastboot flash recovery recovery.img
and last: fastboot reboot
Then download firmware (latest international is: https://mega.co.nz/#!N8BAxZYJ!8cOp8imgnLxNMfUjCDoBtzR69tz7nLYccL2-VMG4If8 ).
Extract that and make dload folder to your external sd card. and put update.app in to it.. then press power+volumeup+volume down when phone restarts, and it starts to install stock firmware

worked! thanx a lot for your help!!!

Progress?

I saw this in facebook group "xperia t3 - india".. it seems we just need the camera to work

and 4G, and sdcard1...

vmlc said:
I saw this in facebook group "xperia t3 - india".. it seems we just need the camera to work
Click to expand...
Click to collapse
Hi i'm the guy how have cyanogen on my T3 , I just wanted to warn you for the rom, select the FXP-cm12-20150412...
And not the FXP-cm12.1 ...
otherwise your phone will bootloop, and when you make the first start of the phone , don't worry if after the bootanimation there's a black screen just wait 2-3 minutes for the update
So enjoy Cyanogen Xperia Users

fastbooking said:
Hi i'm the guy how have cyanogen on my T3 , I just wanted to warn you for the rom, select the FXP-cm12-20150412...
And not the FXP-cm12.1 ...
otherwise your phone will bootloop, and when you make the first start of the phone , don't worry if after the bootanimation there's a black screen just wait 2-3 minutes for the update
So enjoy Cyanogen Xperia Users
Click to expand...
Click to collapse
so, you confirm no 4g and camera working?

vmlc said:
so, you confirm no 4g and camera working?
Click to expand...
Click to collapse
yes no camera and 3G/4G

fastbooking said:
yes no camera and 3G/4G
Click to expand...
Click to collapse
also, you should do a detailed tutorial how to try the seagull build, i tried it the other day, but I couldnt do it....

vmlc said:
also, you should do a detailed tutorial how to try the seagull build, i tried it the other day, but I couldnt do it....
Click to expand...
Click to collapse
I will try tomorow there's a french tutorial about that here's the link for the one's who speak french
phonandroid.com/forum/post1800321.html (www . before its just because i can't now)

Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy

dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
ok, the part I dont get is: "once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot"
how do you do this?

dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
I don't install cyanogen like that,
First I update my phone with EMMA with the Open devices TA
-After I open the zip of the rom and i extract it somewhere you can find it
-take the zip AND THE GAPPS and connect your phone on usb for sending the zip on THE ROOT of your sdcard
-Enter in fastboot, and open flashtool (not emma the other)
-Flash the kernel called : boot.img
-Once Flashed reboot your phone in recovery (up button when the led is purple or violet)
-The led became gold color
- You now are (normaly) in cyanogen recovery
-Wipe data/Factory reset
-Wipe Cache for avoid bugs
-Now the fun part
-Apply update select the ROM and after the GAPPS
-Reboot and enjoy !
If the screen is black for a while after boot it's normal it's the system update
I also recommand you to take the
FXP-cm-12-20150412-UNOFFICIAL-seagull.zip
file because the other in cm12.1 are bootlooping
Now you can enjoy properly without camera and 3G/4G cyanogen
Sorry for my english I'm just a 14 french kid

btw, is this for 5102 or 5103? also, what do I have to be installed on my computer so I can flash boot for fastboot?

vmlc said:
btw, is this for 5102 or 5103? also, what do I have to be installed on my computer so I can flash boot for fastboot?
Click to expand...
Click to collapse
This is for D5103 the D5102 isn't the seagull this name is ONLY for the D5103
For the manipulation you will need emma (called flashtool by sony,for updating the bootloader)
And flashtool by Androxyde (this only is for flash kernel)
:highfive: now you're ready
Enjoy cyanogen on our t3 :laugh:

fastbooking said:
This is for D5103 the D5102 isn't the seagull this name is ONLY for the D5103
For the manipulation you will need emma (called flashtool by sony,for updating the bootloader)
And flashtool by Androxyde (this only is for flash kernel)
:highfive: now you're ready
Enjoy cyanogen on our t3 :laugh:
Click to expand...
Click to collapse
Im having problems flashing the kernel. I cant find my device in fastboot, and when I use flashtool to go ADB mode it says I dont have usb debugging on because I installed zip from recovery, the seagull file...

vmlc said:
Im having problems flashing the kernel. I cant find my device in fastboot, and when I use flashtool to go ADB mode it says I dont have usb debugging on because I installed zip from recovery, the seagull file...
Click to expand...
Click to collapse
Ok let's start off zero
you installed the zip via the philz recovery and after you wanted to flash the kernel ?

dan15 said:
Cyanogen ROM are distributed in zip format, so you have to :
- push the zip file to your sdcard
- you need a kernel with recovery (for the time being, the Philz one)
- you enter in recovery mode
- you select "install zip" and the zip file.
once it's finished, install the right kernel
for that, on your PC, extract the boot.img file from the ROM zip file and flash it with flashtool or fastboot
reboot and enjoy
Click to expand...
Click to collapse
thats what it says...

vmlc said:
thats what it says...
Click to expand...
Click to collapse
follow my tutorial it's the steps i followed and it works for me :good:

fastbooking said:
follow my tutorial it's the steps i followed and it works for me :good:
Click to expand...
Click to collapse
I got bricked meanwhile. Battery problem I think, not the first time...

ok, i think there is a missunderstanding.
in order to flash the kernel, you need to be in fastboot mode (with the blue light). so, once you have installed the zip file, shut down the phone (in recovery mode, select "power options/power off" , disconnect the phone and reconnect it in fastboot (maintain the vol up before and during the USB connection ).
you can now use "flashtool" (the Androxyde's one. to avoid confusion, the Sony's one is called EMMA or if it is more easy for you fastboot.exe
to use fastboot, you open a command line (Windows+R + type "cmd") , you go to the folder where the boot.img is and you enter the comand "fastboot flash boot boot.img". after ~2s the kernel is flashed, you can disconnect the phone and restart.
the first time, the boot time is about 5 min with a black screen after the animated screen, so wait a moment.
it's for that it's very important to have a well charged phone (min 40%) because the first start use a lot of battery, and you can't see anything.

I want to restore, I just installed the zip. Why cant I enter recovery?
edit: ok, I entered cyanogen recovery. will try to boot now. but I dont have backup/restore option....
edit2: ok, It booted but I still want to know how to back to previous version...

vmlc said:
I want to restore, I just installed the zip. Why cant I enter recovery?
edit: ok, I entered cyanogen recovery. will try to boot now. but I dont have backup/restore option....
edit2: ok, It booted but I still want to know how to back to previous version...
Click to expand...
Click to collapse
go on emma and select the android 4.4.4 update KK in the services line under open devices TA
It will restore the like the 1 st day but you will loose your data, but after you can install the philz recovery and restore the backup

Bricked my phone, please help

I upgraded my phone to android EMUI8 and tried to install the RR 8.1 ROM but my device wouldn't boot up. Then I tried to reflash the stock system.img but it won't let me. I don't have TWRP on my phone but I can acces fastboot. Does anyone know what to do? Thanks in advance :^l

jetzecazemier said:
I upgraded my phone to android EMUI8 and tried to install the RR 8.1 ROM but my device wouldn't boot up. Then I tried to reflash the stock system.img but it won't let me. I don't have TWRP on my phone but I can acces fastboot. Does anyone know what to do? Thanks in advance :^l
Click to expand...
Click to collapse
What is it you mean , it won't let you. Does it give a message. Failed?
Are you at frp locked?

mrmazak said:
What is it you mean , it won't let you. Does it give a message. Failed?
Are you at frp locked?
Click to expand...
Click to collapse
Well when I try to flash the stock 8.0 system.img it gives me a "Invalid sparse file format at header magi" and when I try to flash TWRP it gives me a "FAILED (remote: partition length get error) I am frp unlocked by the way.

jetzecazemier said:
Well when I try to flash the stock 8.0 system.img it gives me a "Invalid sparse file format at header magi" and when I try to flash TWRP it gives me a "FAILED (remote: partition length get error)
Click to expand...
Click to collapse
Ok, that does not seem too bad, yet.
I suppose you are using system.img downloaded from web.
That image has given many that same error.
Best to use your system.img.
And the error flashing twrp, is common when using the nougat command or nougat recovery on Oreo.
Solutions.
Find your firmware on pro-teammt
http://pro-teammt.ru/firmware-database/?firmware_model=Bnd-&firmware_page=0
Then download update.zip
Extract files.
Get hauwei update extractor.
https://www.google.com/url?sa=t&sou...FjAAegQIARAB&usg=AOvVaw0xkKEyI85nY9x4Fjr1AWJl
Extract the system.img
Then fastboot flash it.
Recovery:
Oreo command== fastboot flash recovery_ramdisk twrp_ramdisk
Twrp name depends on version used. I use build 4 from here
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447

mrmazak said:
Ok, that does not seem too bad, yet.
I suppose you are using system.img downloaded from web.
That image has given many that same error.
Best to use your system.img.
And the error flashing twrp, is common when using the nougat command or nougat recovery on Oreo.
Solutions.
Find your firmware on pro-teammt
http://pro-teammt.ru/firmware-database/?firmware_model=Bnd-&firmware_page=0
Then download update.zip
Extract files.
Get hauwei update extractor.
https://www.google.com/url?sa=t&sou...FjAAegQIARAB&usg=AOvVaw0xkKEyI85nY9x4Fjr1AWJl
Extract the system.img
Then fastboot flash it.
Recovery:
Oreo command== fastboot flash recovery_ramdisk twrp_ramdisk
Twrp name depends on version used. I use build 4 from here
https://forum.xda-developers.com/p10-lite/development/recovery-twrp-3-2-1-0-t3783447
Click to expand...
Click to collapse
Okay so I've downloaded the latest firmware for my model but when I try to extract the update.app inside of the update.zip file the huawei zip extractor gives me "RECOVERY_RAMDIS.img: Invalid header crc - Expected: 15200 Got: 44917

jetzecazemier said:
Okay so I've downloaded the latest firmware for my model but when I try to extract the update.app inside of the update.zip file the huawei zip extractor gives me "RECOVERY_RAMDIS.img: Invalid header crc - Expected: 15200 Got: 44917
Click to expand...
Click to collapse
yes there is a bug either in the extractor or the update files. they all do it. Go to the settings tab and take check mark off verify header.

mrmazak said:
yes there is a bug either in the extractor or the update files. they all do it. Go to the settings tab and take check mark off verify header.
Click to expand...
Click to collapse
I flashed the system.img but now the phone bootloops. It could be possible I got the wrong system.img because I don't know exactly what firmware my phone was on before I messed up. I only know it was EMUI8. Is there a way to completely reflash everything?

jetzecazemier said:
I flashed the system.img but now the phone bootloops. It could be possible I got the wrong system.img because I don't know exactly what firmware my phone was on before I messed up. I only know it was EMUI8. Is there a way to completely reflash everything?
Click to expand...
Click to collapse
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.

mrmazak said:
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.
Click to expand...
Click to collapse
Alright, I'll try that before I have a look at that thread

mrmazak said:
Yes. I have guide thread here for that.
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
But also wipe in factory reset from stock recovery may solve the bootloop.
Click to expand...
Click to collapse
I tried rebooting to stock recovery in order to factory reset but it only shows me the update, power off and reboot options so no factory reset possibility. I read through the entire thread you linked here but I'm very confused as to what to do with the full OTA file. I'm on a broken EMUI8 that bootloops and I'd like to clean flash EMUI8 again so I can flash an AOSP Oreo rom after that. What do I do?

jetzecazemier said:
I tried rebooting to stock recovery in order to factory reset but it only shows me the update, power off and reboot options so no factory reset possibility. I read through the entire thread you linked here but I'm very confused as to what to do with the full OTA file. I'm on a broken EMUI8 that bootloops and I'd like to clean flash EMUI8 again so I can flash an AOSP Oreo rom after that. What do I do?
Click to expand...
Click to collapse
Just made updates to guide last night. I think it is worded simple now.
Download my update "package" from step E
Extract it to a folder on your PC.
You are on emui8, so copy the HWOTA folder from the extracted zip to your sdcard
Also put hwota-update-7-8-auto.zip on sdcard.
Put the three (3) update files from pro-teammt.ru in the HWOTA8 folder on your sdcard
Put card into phone
Boot into twrp
Select install
Choose sdcard as source
Install hwota-update-7-8-auto.zip

mrmazak said:
Just made updates to guide last night. I think it is worded simple now.
Download my update "package" from step E
Extract it to a folder on your PC.
You are on emui8, so copy the HWOTA folder from the extracted zip to your sdcard
Also put hwota-update-7-8-auto.zip on sdcard.
Put the three (3) update files from pro-teammt.ru in the HWOTA8 folder on your sdcard
Put card into phone
Boot into twrp
Select install
Choose sdcard as source
Install hwota-update-7-8-auto.zip
Click to expand...
Click to collapse
So far so good but the FULLOTA update file I got from that website only has one file (update.zip) Do I need to extract that? And if so, what 3 files do I put on my sdcard?

jetzecazemier said:
So far so good but the FULLOTA update file I got from that website only has one file (update.zip) Do I need to extract that? And if so, what 3 files do I put on my sdcard?
Click to expand...
Click to collapse
No do not extract it.
On that site, next to link for update file, is "file list"
Click this. It gives links for all three files.
Put those three zip files into hwota folder

mrmazak said:
No do not extract it.
On that site, next to link for update file, is "file list"
Click this. It gives links for all three files.
Put those three zip files into hwota folder
Click to expand...
Click to collapse
Alright, I got it! Now I need to flash TWRP but the executable to install TWRP says my adb drivers are outdated. I have the minimal fastboot and adb installation from XDA.

jetzecazemier said:
Alright, I got it! Now I need to flash TWRP but the executable to install TWRP says my adb drivers are outdated. I have the minimal fastboot and adb installation from XDA.
Click to expand...
Click to collapse
That should be fine.
Usually means you have other adb also , probably from other tool.
If you have twrp , not need to use the terp recovery installer

mrmazak said:
That should be fine.
Usually means you have other adb also , probably from other tool.
If you have twrp , not need to use the terp recovery installer
Click to expand...
Click to collapse
Well the problem is I don't have TWRP and none of the versions i've tried to install work. The installer doesn't work either, it says closing adb daemon and stays on that.

jetzecazemier said:
Well the problem is I don't have TWRP and none of the versions i've tried to install work. The installer doesn't work either, it says closing adb daemon and stays on that.
Click to expand...
Click to collapse
Each step of the tool I put pause.
So it stopped on command and not closed.
Press spacebar

mrmazak said:
Each step of the tool I put pause.
So it stopped on command and not closed.
Press spacebar
Click to expand...
Click to collapse
Dude, you're the man! I got my device up and running again. I'll probably stay on EMUI8 since it's more stable than the current AOSP rom. I wanna root it tho so can I just use the lazy recovery tool to install twrp and simply install magisk?

jetzecazemier said:
Dude, you're the man! I got my device up and running again. I'll probably stay on EMUI8 since it's more stable than the current AOSP rom. I wanna root it tho so can I just use the lazy recovery tool to install twrp and simply install magisk?
Click to expand...
Click to collapse
Yes.
The lazy tool has recovery with encryption working

I got it working on EMUI8 but I decided to flash the aosp rom cuz i prefer stock android. Can't seem to get twrp to install tho. I keep getting "1 was unexpected at this time"

Guide to check and change fingerprint from CN to WW with final Android 9 1910.64 RAW

FIrst off many thanks to @vhercastillojr (as this thread is essentially his) and Chicken from the Vietnam telegram group for providing the RAW's/img's
********** DO THIS AT YOUR OWN RISK!!! I am not liable to any damage if you accidentally brick your device. This will void your warranty, if you had one. Also, using this method you won't be able to revert back to CN roms, lock your bootloader again and recieve OTAs, your device will be blacklisted by Asus ************
NOTE: To check your current fingerprint, download and install device info HW from the playstore. Under 'system' you'll find the current rom (CN or WW), the product id and fingerprint - they all need to match to be able to update your device later
NOTE 2: The main guide below skips early roms straight to last Android 9 for ROG II. For one user it didn't work and they had to use the previous, unedited guide which was based on 1910.35 RAW. If the below guide fails to update follow the additional guide at the end of this post.
----------
0) Download the ROG phone unlock tool and copy it on your phone and install it then run it. The phone will boot twice. DO NOT PRESS POWER TO STOP THE BOOT. It will wipe your data automatically. This will unlock your bootloader. EDIT: NEWER VERSION OF THE TOOL CAN BE FOUND here
NOTE: this will void your warranty, if you had one, with Asus, even if you re-lock your bootloader later... (Although, having bought mine as an import from China, I'm think the warranty only stands with the seller - in my case, 1 year, not Asus - but i may be wrong)
1) Download the WW International RAW rom from here
2) Extract the file on your PC. Boot the phone into fastboot mode (hold volume up then press and hold power button, Fastboot mode is the 1st screen you come across, the one with the options to Start, boot to recovery, etc...) connect to the side port and run "flashall_AFT.cmd" wait for it to finish and the phone will restart itself (it will take a number of minutes to complete, with the cmd window open all the time. If the cmd window only flashes up and closes down, then check the rest of the notes with this step).
NOTE: you need to remove or delete the original zip from the raw folder once extracted as it confuses the Flashall_AFT.cmd with the raw rom and zip having the same name. Also, it can help to extract to the root of C drive.
3) Download and install Minimal ADB and Fastboot app (windows). Install it on your PC to root of C drive
4) Download the rootww191064.img and place it in the Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot) from here
5) Run Minimal ADB and Fastboot by double clicking ''cmd-here.exe''. Switch the phone into fastboot mode (hold volume up then press and hold power button) then type "fastboot flash boot rootww191064.img" without quotation marks
NOTE: you can also check your device is recognised in fastboot mode by the pc/laptop by running ''fastboot devices'' cmd which should show your device serial
6) Reboot the phone and connect it to PC, copy and install Magisk and Root Explorer
Magisk
root explorer
-run magisk, (update if necessary) and grant access to root explorer (after opening root explorer you should be prompted by magisk to gain root access, click 'allow')
7) Open the Root Explorer App on you phone. Then from the app, select Mount R/W to R/O. Search for "/vendor/factory" folder and Edit the file content COUNTRY from CN to WW (ALL Capital). Scroll to "/system/etc/AsusTheme/themes" then delete the hidden file to enable the hidden themes.
8) Restart the Phone. You are done. Check again with device info HW that your fingerprint has indeed been successfully changed.
From here, if you want to be on latest Android 10, download version 2004.60 from here (full zip), place it in root of internal storage and reboot. That'll bring you to A10.
NOTE: For those of you that are rooted: Download the full zip, move to root of internal storage and reboot. System will detect and prompt to update, click update. Wait until it finishes but DON'T click 'restart', instead, click 'restart later'. Go to Magisk manager. Click 'install' for Magisk. Click the last option 'install to inactive slot after OTA'. Click confirm force flash. Reboot when prompted. Done - root kept intact.
Repeat the process for latest (currently 2012.65) using the same link above. Your phone should hopefully skip the other versions and be straight to latest. If not, you'll have to go through 2007.27, 2009.49 and finally to current latest 2012.65. Repeat the process mentioned above for keeping root if so desired
----------
For anyone still running early roms that 1910.64 won't flash directly to, use the same guide above but with the following corrections:
2) Follow the exact same instructions but using this 1910.35 RAW
4) Download root and stock boot img's and extract them to Minimal ADB and Fastboot Folder (C:\Program Files (x86)\Minimal ADB and Fastboot)
5) Run Minimal ADB and Fastboot by double clicking ''cmd-here.exe''. Switch the phone into fastboot mode (hold volume up then press and hold power button) then type "fastboot flash boot rootww191035.img" without quotation marks
NOTE: you can also check your device is recognised in fastboot mode by the pc/laptop by running ''fastboot devices'' cmd which should show your device serial
After doing the ammended steps above for 1910.35, follow the rest of the guide to change fingerprint, then update to 1910.64 zip, place it in root of internal storage and reboot.
NOTE: For those of you that are rooted: Download the full zip, move to root of internal storage and reboot. System will detect and prompt to update, click update. Wait until it finishes but DON'T click 'restart', instead, click 'restart later'. Go to Magisk manager. Click 'install' for Magisk. Click the last option 'install to inactive slot after OTA'. Click confirm force flash. Reboot when prompted. Done - root kept intact.
******************* Thanks to @Barbatos19, who suggested I make video. Sorry to say I wont be, BUT several of you guys have recommended THIS VIDEO as a good reference guide... Hope it helps some others *******************
Finally(!!!), apologies that this post has become cluttered with instructions, I have tried to cater for all you and all eventualities!! Good luck

Thanks for this guide bro. Fully converted from CN to WW.

It wilk work if i have now flashed WW rom but with CN fingerprint? It was like this when i bought from GearBest

Zdrpkamil said:
It wilk work if i have now flashed WW rom but with CN fingerprint? It was like this when i bought from GearBest
Click to expand...
Click to collapse
Which rom version are running, if it's already 1910.35 then you can skip the flashing rom part. But if it's different, you need to follow each step

reg66 said:
Which rom version are running, if it's already 1910.35 then you can skip the flashing rom part. But if it's different, you need to follow each step
Click to expand...
Click to collapse
1906.19

Zdrpkamil said:
1906.19
Click to expand...
Click to collapse
You need to follow each step then

reg66 said:
You need to follow each step then
Click to expand...
Click to collapse
Ok, thanks. I'll do it at weekend and tell if works

what to do when the phone gets stuck on bootloop after flashing rootww191035.img and holding the power button doesnt work either?

Spawn_Ishan said:
what to do when the phone gets stuck on bootloop after flashing rootww191035.img and holding the power button doesnt work either?
Click to expand...
Click to collapse
Edit; didn't realise you were at this stage... Are you sure the flashing of the raw rom worked OK? Did you a cmd window open for a good 5-10 mins while the rom flashed?

Will KingRoot app work to root this phone? Don't want to have to wipe data to root.
I am pretty sure it won't, but humor me. Or is their something else out there that works?

jkeener88 said:
Will KingRoot app work to root this phone? Don't want to have to wipe data to root.
Click to expand...
Click to collapse
No idea... But im doubtful

hi bro
your link unlock tool its 190702..i can use it?
my rom ww1908.12 with finger CN
your file link name in step 4 is not same and file name is step 5..
its a same file to use?step 4 name boot&rootww and step 5 file ne to use rootww..do need to rename file step 4 to rootww?
and u have link l file to unroot 191035?
thx bro

wilsen1985 said:
hi bro
your link unlock tool its 190702..i can use it?
my rom ww1908.12 with finger CN
your file link name in step 4 is not same and file name is step 5..
its a same file to use?step 4 name boot&rootww and step 5 file ne to use rootww..do need to rename file step 4 to rootww?
and u have link l file to unroot 191035?
thx bro
Click to expand...
Click to collapse
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
EDIT: yes, the zip file to download in step 4 needs to be extracted. it contains both the root boot img and stock img for later on when you unroot etc (both root and stock boot img's are for 1910.35). you need to place the rootww191035.img in the same folder as adb... and do the same for the stock boot.img for later use... read the instructions carefully...

reg66 said:
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
Click to expand...
Click to collapse
i can't find link unroot 191035..
do u have thats link?

wilsen1985 said:
i can't find link unroot 191035..
do u have thats link?
Click to expand...
Click to collapse
in step 4) you download a .zip file that conatins BOTH rootww191035.img AND boot.img - the boot.img IS the stock boot for unrooting 1910.35, you need to extract both img's to adb folder on your pc.

reg66 said:
One moment, I'll check the links... And yes, that is the only unlock tool available from asus website...
EDIT: yes, the zip file to download in step 4 needs to be extracted. it contains both the root boot img and stock img for later on when you unroot etc (both root and stock boot img's are for 1910.35). you need to place the rootww191035.img in the same folder as adb... and do the same for the stock boot.img for later use... read the instructions carefully...
Click to expand...
Click to collapse
oh ok thx bro
1 question again
yesterday i download file raw ww1910.35 zip on asus website
can i use its raw file to this tutor or must download raw file in page 1?

wilsen1985 said:
oh ok thx bro
1 question again
yesterday i download file raw ww1910.35 zip on asus website
can i use its raw file to this tutor or must download raw file in page 1?
Click to expand...
Click to collapse
What you downloaded is not, I think, the raw rom, its the update zip for those who have already changed fingerprint and are simply updating... Please use the links in 1st page...

reg66 said:
What you downloaded is not, I think, the raw rom, its the update zip for those who have already changed fingerprint and are simply updating... Please use the links in 1st page...
Click to expand...
Click to collapse
oh ok bro
i download raw in page 1 n when its complete i start for flash..
hope im succes for all convert
thx bro..

wilsen1985 said:
oh ok bro
i download raw in page 1 n when its complete i start for flash..
hope im succes for all convert
thx bro..
Click to expand...
Click to collapse
Good luck, make sure you read it all and follow each step accurately

reg66 said:
Good luck, make sure you read it all and follow each step accurately
Click to expand...
Click to collapse
ok bro very thx..

Question Flash stock Rom Poco F3

Hallo Guys ,
My situation is , I flashed Xiaomi.eu MIUI 13 Rom on my Poco F3.
Now I'm willing to give it as a gift and would like to flash back the stock Rom with Android 11.
I downloaded fastboot stock Rom for Europe and the flashtool is installed on my pc as well .
I put the Phone on fastboot mode and connect the phone to the Pc and start flashtool , press refresh to recognise the device , no issues there , but once I click flash to start the process I get the error message " can not found flash _all_ lock.bat .
I need help please what do I do wrong ?
I went for the installable flash tool because the zipped version delivers errors as well when I press refresh for recognise the device .
Thanks for help

Check again inside folder. It should be double folder which is flash tool can not detect flash bat.

anang1979 said:
Check again inside folder. It should be double folder which is flash tool can not detect flash bat.
Click to expand...
Click to collapse
Which folder? From the zipped flashtool or ?

From fasboot rom. If you unzip there is another folder inside with same name. That folder you should put into flash tool.

anang1979 said:
From fasboot rom. If you unzip there is another folder inside with same name. That folder you should put into flash tool.
Click to expand...
Click to collapse
Thanks I just had to unzip the Rom again as it was tgz compressed , and it worked like a Charme.. thread solved . Thanks mate