Hello All,
Due to my endless frustrations, this might be a long one so please bear with me!
So I purchased a Verizon Global HTC ONE M7 from the States, I am currently in Nigeria and the only thing that makes me sadder and more frustrated than the state of my phone right now is the incessant terror attacks in the country! Initially, almost everything worked fine when i popped in my new Etisalat sim card into the phone, except for the mobile hotspot (which just conveniently turns out to be the one of the top 3 most important features in a phone for me - probably the feature I use the most) this message kept popping up about how hotspot couldn't be used without a VZW sim, etc (also with the non-verizon sim warning when the phone boots up). I tried all I could, eventually deciding to flash a new ROM to clear out everything Verizon and start fresh.
Enter Viperone 6.2.0 - everything worked initially, but after a few weeks i noticed if I did anything like watch a youtube video or download something over a few MBs 90% of the time the data drops (no visible signs like changes from E to H or 3g or the likes, everything looks the same, just that the data stops), toggle mobile data on/off and data connection is back. It worsened and became more frequent over time. Upgraded to Viperone 6.2.1, no difference, so i figured its probably the viperone rom.
Enter Cyanogenmod - http://forum.xda-developers.com/ver...-oneplus-one-stock-rom-cm11s-verizon-t2857425 - and its the same exact issue from the beginning, so im guessing its not to do with the ROM at all (though there are one or two niggling issues with the ROM - cant change BBM display pic, etc)?! I've really tried to comb through the forum and see what makes sense that i could try without bugging y'all - I did a factory reset, wiped everything completely and its the same thing.
I've seen suggestions to similar issues like: flash stock recovery, update radio/firmware/kernel, flash back to custom recovery and some other things which are beginning to sound quite dangerous in my ignorance!! I did believe updating the firmware made sense but after digging deeper, i must honestly say i'm quite confused on what to do. what radio/firmware/kernel works with what software version, etc- most firmware that i've seen are 4.4.3 compatible, while this ROM is 4.4.4., some of them seem to be for stock ROMs only and a lot of other confusions.
So, I'm not gonna be a hero and brick my phone from trying to do what i do not understand, instead here i am, hat in hand, crying out for help after suffering for 3 months! Its really frustrating as, downloads break causing me to lose data, skype or MSLync calls always break and im beginning to look unprofessional to people! This is why I have decided to put up a post of my own specific to my case so i don't medicate for someone else's ailments. So please........ WHAT EXACTLY DO I DO??
PHONE DETAILS (typing it out as i've just realized on this ROM i can't take screenshots with Power+Home button combo anymore and can't be bothered at this point!!!)
ANDROID VERSION: 4.4.4
BASEBAND VERSION: 1.12.41.1112_2
KERNEL VERSION: 3.4.82-gfe09065; [email protected] #1; Wed oct 8 01:36:03 PDT 2014
BUILD DATE: SUN AUG 3 23:00:51 PDT 2014
BUILD NUMBER: CYANOGENMOD 11S v5 (Verizon)
SELinux status: Enforcing
Thanks
Have you tried a stock version of sense? Essentially what our phone was meant to run. Viper uses a lot of custom tweaks for the masses, and sometimes carrier specifics get finicky. I would suggest santods stock Rom, bonestock, or ecliptic. I think nusense uses an international base and not strictly vzw, but you could also try that one...and santod can clarify about the details.
Hope you get it going.
Sent from my One.
Can you flash stock recovery from Santod's firmware thread and do a factory reset? It could be a corrupt nv partition which would only be fixed by doing a factory reset via stock recovery. (If you must, make a nandroid of system and data in your recovery of choice so you can restore your data if you wish).
Uzephi said:
Can you flash stock recovery from Santod's firmware thread and do a factory reset? It could be a corrupt nv partition which would only be fixed by doing a factory reset via stock recovery. (If you must, make a nandroid of system and data in your recovery of choice so you can restore your data if you wish).
Click to expand...
Click to collapse
Thanks for the responses folks, i'll try out your suggestions and revert..
8100
brymaster5000 said:
Have you tried a stock version of sense? Essentially what our phone was meant to run. Viper uses a lot of custom tweaks for the masses, and sometimes carrier specifics get finicky. I would suggest santods stock Rom, bonestock, or ecliptic. I think nusense uses an international base and not strictly vzw, but you could also try that one...and santod can clarify about the details.
Hope you get it going.
Sent from my One.
Click to expand...
Click to collapse
So.. i found time to get to this and decided to go with your suggestion of Santod's stock rom... and now, i think i've done the unthinkable!! After WIPING EVERYTHING "All partitions except SD!" as the instructions stated... i attempted to reboot into bootloader and got a message saying "no OS installed, are you sure you want to reboot"... that scared me a bit, but i thought surely, it must be part of the process! I proceed to reboot to bootloader to flash the firmware and i cant seem to do anything!!
Fastboot is stuck on " waiting for device" for everything i try.
Also, i rebooted back into recovery and attempted to install the stock rom: i get the error message "unable to open zip file"..
Have i destroyed my phone with my own hands, people? :crying:
Mr HaRR said:
So.. i found time to get to this and decided to go with your suggestion of Santod's stock rom... and now, i think i've done the unthinkable!! After WIPING EVERYTHING "All partitions except SD!" as the instructions stated... i attempted to reboot into bootloader and got a message saying "no OS installed, are you sure you want to reboot"... that scared me a bit, but i thought surely, it must be part of the process! I proceed to reboot to bootloader to flash the firmware and i cant seem to do anything!!
Fastboot is stuck on " waiting for device" for everything i try.
Also, i rebooted back into recovery and attempted to install the stock rom: i get the error message "unable to open zip file"..
Have i destroyed my phone with my own hands, people? :crying:
Click to expand...
Click to collapse
FALSE ALARM FOLKS!!! I decided to attempt flashing the CM11 rom i just uninstalled and it worked. Turns out its a known issue with the .zip file for that rom - i am now re-downloading from another mirror. Meanwhile the Fastboot thing was just a driver issue - though i'm surprised because i had all the drivers installed on the system and have used fastboot successfully - anyway i reinstalled the drivers and all was well with fastboot again.
NB: Don't get tired of me just yet please!
brymaster5000 said:
Have you tried a stock version of sense? Essentially what our phone was meant to run. Viper uses a lot of custom tweaks for the masses, and sometimes carrier specifics get finicky. I would suggest santods stock Rom, bonestock, or ecliptic. I think nusense uses an international base and not strictly vzw, but you could also try that one...and santod can clarify about the details.
Hope you get it going.
Sent from my One.
Click to expand...
Click to collapse
hello!
Thanks for your ideas guys. I'm currently running Santod's stock rom (which is brilliant, i must say, i actually wanna stay on this rom) since friday - thought i'd give it the whole weekend and see how it goes.. BUT! i still get thoseconnection drops.. and frequently too.
Any other ideas on what the issue could be?
Mr HaRR said:
hello!
Thanks for your ideas guys. I'm currently running Santod's stock rom (which is brilliant, i must say, i actually wanna stay on this rom) since friday - thought i'd give it the whole weekend and see how it goes.. BUT! i still get thoseconnection drops.. and frequently too.
Any other ideas on what the issue could be?
Click to expand...
Click to collapse
If doing factory reset from stock recovery doesn't fix it, it is most likely a burned SIM. It has happened to me. (Average 150+ GB a month in data, so I burn em easily)
Sent from my HTC6500LVWBLU using XDA Free mobile app
Uz has it right, you need to flash a stock recovery and THEN do a factory reset, then reload your custom recovery and rom. I had the exact same issue before. Or you could flash an ruu file which would reset the partitions also.
ccarr313 said:
Uz has it right, you need to flash a stock recovery and THEN do a factory reset, then reload your custom recovery and rom. I had the exact same issue before. Or you could flash an ruu file which would reset the partitions also.
Click to expand...
Click to collapse
Hey folks, apologies for the touch and go nature of this thread - i just don't have a lot of free time on my hands and other reasons..
Anyhow, i think I want to try out ur suggestion of flashing an RUU - I noticed that im unable to actually enter recovery after flashing stock recovery from Santod's thread (i flashed the latest three recoveries). I can get to bootloader, but when i select recovery, the phone goes black for a few seconds and then i get the RED TRIANGLE WITH THE EXCLAMATION MARK INSIDE, obviously something's wrong, few seconds later the phone reboots itself into normal mode. I did do a factory reset from bootloader, but issue persists.
So now to the RUU flashing issue - could you suggest one for me to flash?
By the way though, isn't flashing an ruu gonna take me back to stock completely (as in back to S-ON, ETC..)?
Thanks a whole bunch - IM DETERMINED TO GET THIS TO WORK!!!
Mr HaRR said:
Hey folks, apologies for the touch and go nature of this thread - i just don't have a lot of free time on my hands and other reasons..
Anyhow, i think I want to try out ur suggestion of flashing an RUU - I noticed that im unable to actually enter recovery after flashing stock recovery from Santod's thread (i flashed the latest three recoveries). I can get to bootloader, but when i select recovery, the phone goes black for a few seconds and then i get the RED TRIANGLE WITH THE EXCLAMATION MARK INSIDE, obviously something's wrong, few seconds later the phone reboots itself into normal mode. I did do a factory reset from bootloader, but issue persists.
So now to the RUU flashing issue - could you suggest one for me to flash?
By the way though, isn't flashing an ruu gonna take me back to stock completely (as in back to S-ON, ETC..)?
Thanks a whole bunch - IM DETERMINED TO GET THIS TO WORK!!!
Click to expand...
Click to collapse
That is in fact stock recovery man. When you get the triangle press volume up and power at the same time. You will enter stock recovery.
Any of my ruu will run fine. You won't lose s-off or unlocked status. You flash them in boot loader fastboot mode.
dottat said:
That is in fact stock recovery man. When you get the triangle press volume up and power at the same time. You will enter stock recovery.
Any of my ruu will run fine. You won't lose s-off or unlocked status. You flash them in boot loader fastboot mode.
Click to expand...
Click to collapse
HA! and now i feel :silly: !!
Bless your soul! i'll give it a go shortly...
Related
So annoyed right now. For the second time, my phone has randomly gone in to a boot loop. Completely stock, never unlocked or rooted or anything. So bloody annoying because now I have to reflash stock with ODIN which will wipe my phone again.
I suppose to send it back under warranty I have to pay for shipping and wait a month for a replacement?
case0 said:
So annoyed right now. For the second time, my phone has randomly gone in to a boot loop. Completely stock, never unlocked or rooted or anything. So bloody annoying because now I have to reflash stock with ODIN which will wipe my phone again.
I suppose to send it back under warranty I have to pay for shipping and wait a month for a replacement?
Click to expand...
Click to collapse
If you know how to use Odin, you can figure out how to root, flash a ROM, and use a custom kernel.
See if that helps out your phone with the boot loops. If it doesn't you could always just flash back to stock and send it back.
You're right actually, I suppose I could use this as an excuse to root it. I've held off from doing it though because I always thought if I got a Nexus device I wouldn't need to bother with flashing new roms, but it would be quite nice to upgrade from 4.0.2 I guess.
At least then if it decides to do it again I'll have a nandroid. Still annoyed that this has happened for the second time though
case0 said:
You're right actually, I suppose I could use this as an excuse to root it. I've held off from doing it though because I always thought if I got a Nexus device I wouldn't need to bother with flashing new roms, but it would be quite nice to upgrade from 4.0.2 I guess.
At least then if it decides to do it again I'll have a nandroid. Still annoyed that this has happened for the second time though
Click to expand...
Click to collapse
Bootloops are usually software related, so rooting and flashing an entire new ROM will probably help you.
Just use the toolkit if you're not comfortable rooting
Oh, and since you were having boot loop issues
I would
Make nandroid
wipe data
wipe cache
wipe dalvik cache
Format System
Format Cache
Install Rom
Install Gapps (if required by your ROM)
Reboot and Enjoy
Oh, and then pick a kernel of your choice
I'm sorry you getting random bootloops, and I understand you're expecting them to go away merely by reflashing the same rom, but why are you using ODIN (a leaked, unsupported SAMSUNG flashing program), instead of FASTBOOT, officially supported by Google/AOSP?
bk201doesntexist said:
I'm sorry you getting random bootloops, and I understand you're expecting them to go away merely by reflashing the same rom, but why are you using ODIN (a leaked, unsupported SAMSUNG flashing program), instead of FASTBOOT, officially supported by Google/AOSP?
Click to expand...
Click to collapse
I'm assuming it's because he comes from an SGS/SGS2 and isn't ready yet to step out of his comfort zone. But I agree that learning how to use fastboot is the way to go. And that the process of repackaging the images for odin may actually be the source of the problem (although I know little about such things that I may be wrong).
The last time it happened I just searched for a thread to reflash stock and the first thing I came across was ODIN, what difference does it make? And what do you mean it's leaked? I got it from the Samsung website last time. It's not because it was out of my comfort zone hehe, I'm quite experienced using adb etc, even did a bit of theming before on my Hero.
As an update to my situation - I unlocked/rooted/installed AOKP this morning. Has some nice additions and seems a bit snappier, looking forward to seeing if I have better battery life with it. Oh and I used fastboot not the one-click program. It's only a couple of lines in the terminal after all.
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
gvazquez82 said:
I apologize in advance if any of this makes you roll your eyes at my stupidity.
Good Afternoon
I have an ATT samsung galaxy s3, Because of the glitches with 4.3 I was experiencing I decided to install custom software on my phone. So I looked up guides and got everything I needed. I did manage to get root access, and verified with super user. I also installed TWRP and CWM because each kept giving me errors when I tried to install CM 11 onto my phone. I tried CWM first, and when that didn't work I tried TWRP. It says there was no MD5 information found when I try to install any mod. how ever I have used the md5 file checker program and the MD5 matches up to what was listed in this one for example.
http://forum.xda-developers.com/show....php?t=2518998
Download:
CM 11.0 Unofficial Beta 7 for d2tmo and d2att
MD5: ef93957db1e6704f23f9015231a82826
So the MD5 matches, yet when I try to install it keeps giving me errors. I also tried other versions of CM that I found on here via links. Right now my phone has no OS as another guide I read some where also said to wipe system data (sorry if that was stupid, I was just following a guideline) And even more stupid, no I don't have a backup because in my naivety and stupidity I didn't think I'd need one as it seemed so simple from all the guides and videos I'd seen.
Yesterday a friend of mine knowledgeable with tech stuff took one of the original stock Image ROMs I'd downloaded and using linux and some program he managed to do some crazy stuff I can't even describe on here. All I saw was a lot of typing of command lines and it got my phone working again, how ever it wasn't exactly the stock image I guess because the phone would not make or receive calls/texts.
Since my phone was powering on again and the android OS was loading I figured I could connect it to my computer and use KIES to download the official latest update so my phone would be back on the legit software. But trying to do that...well broke my phone again. So I'm at a loss now of what to do. Right now I can still get to download mode on my phone, but when I try to get into recovery mode I get an error that "firmware upgrade encountered an issue. Please select recovery mode in KIES & try again." Which I've tried, and every time I try it gives me an error message.So I'm at a loss of what to do next.
So I'd like to get a working OS on my phone asap so I can get calls and texts.
Any help would be greatly appreciated. And being new I'm sorry if I broke any taboos or did not give some information that is typically given when describing a problem.
Click to expand...
Click to collapse
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
MrHaPpY66 said:
same error happened to me yesterday and spent the whole day figuring it out. get into download mode. boot up ODIN and reflash your preferred custom recovery. after that, i couldn't find anything else to restore my phone with so i installed 4.3 leaked from here. doesn't matter which one you select. http://forum.xda-developers.com/showthread.php?t=2498233. place it on your sd card and head into recovery mode, wipe data/factory reset and cache. head to install zip from sd card and select the 4.3 zip you downloaded. reboot system and it should work. the at&t boot screen takes a while so be patient
Click to expand...
Click to collapse
First of all thank you for trying to help me, I hope you are having a good Thanks Giving.
I used the thread you linked to, and downloaded the version with out knox. I followed the instructions
transferred ROM and flashed kernel file to SD card
used odin to flash TWRP,
used twrp to flash rom and kernel file.
and it takes the file thankfully, there's only one issue. My phone can't make or receive calls/texts. Is yours able to?
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Next Update
the bootloader I flashed apparently flashed to the external sd card? I flashed another one and it is booting from the internal sd. I had to flash a different modem the one in the bootloader/modem file I flashed from the link above didnt take? I got most everything sorted out, but im getting tired, it has been an all night adventure. its 08:23 est now
sorry for the delay in updating this I had to get some rest.
theramsey3 said:
I messed up and was playing with things That I had no business playing with and decided that I should do a restore of a backup (TWRP) I made as soon as I rooted the 4.3 OTA. well it has soft bricked my phone. it was a TWRP 4.3 Nandroid and has me messed up a little.
so far I tried My nandroid (no dice now a soft brick) cleared cache and dalvik, It was booting as far as the white at&t spinning thing,
Factory reset same on booting,
Tried a format of the internal sd this is where it gets sketchy it now goes as far as the second samsung screen(the one that says Samsung GALAXY S III)
4.3 OTA .zip (no dice TWRP wont flash it) same on the booting 2nd samsung boot screen
Tried the files in the link above and got a Hard brick
Used the debricking .IMG file and got TWRP and download mode back
Any suggestions?
Looks like I might need a JTAG/RIFF BOX for this one. If nothing else I spent many Hours of darkness discovering the darkness of android 4.3
If I get recovered from this and with a different rom like 4.1.2 I will be happy. the 4.3 OTA was very stable but I did miss wifi tether and the whole hardbrick thing was kind of a bummer. it would be real nice to have an ODIN file to fix this (AHEM samsung) or atleast perhaps stopped the progression of it to a hard brick.
New update
I got my phone booting up again however there is a catch. That unbrick.img file on my 16GB sd card is still required to boot the phone and I have no cell service what so ever. Tried to check apn settings because at home I sometimes get poor service and I run net10 so I was going to fix my apn and it says insert sim??? the sim is properly inserted???
Click to expand...
Click to collapse
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
spongdangly said:
Go into Settings, About Phone, Status and check to see if your IMEI and Serial Number are present. If you only lost your IMEI there's a guide on how to inject it back (I'm not sure where the guide is). However if you've lost your serial number and don't have a Nandroid that can restore it I don't know what to do.
Click to expand...
Click to collapse
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I will give that a shot, but what's an APN, sorry. And how do I create one, and is it needed for me to do so?
gvazquez82 said:
i have my serial number showing but no IMEI number. So is that all that's needed for me to be able to call and text again?
Click to expand...
Click to collapse
It should be, I'm working right now so I don't have time to fine the guide on how to inject your IMEI. If I remember correctly it involves using QPST. If you have an old (or any) working Nandroid backup that should fix the problem.
FYI, make sure you don't use the guide for the international S3 as it has different hardware and folder structure/contents.
As for the APN, it should automatically fill itself in since it reads it off the SIM Card (I might be wrong).
theramsey3 said:
I updated my post above and showed my soultion. I simply had to flash a new modem and almost everything was kosher. I also had to flasah a different kernel but that was for preference not because things werent working.
http://forum.xda-developers.com/showpost.php?p=47817339&postcount=23 Modem download
I used that modem, flash it and see if your problems go away. I use Net10 so after I flashed the Modem I had to create an APN aswell, but that is nothing new for me.
Click to expand...
Click to collapse
I tried it and it work!!!!!!!!!!!!!!!!!
67 texts just came in. Sir, I thank you oh so kindly. You have made this gloomy rainy day oh so joyous.
No problem. Glad I could help you.
The real credit should go to -Mr.X-, loserskater and anyone else(no disrespect there were alot of files) whose stuff I tried to flash lastnight thank you all in the dev community who contribute.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
gvazquez82 said:
So I guess the next question, do I try again to install kit kat on my phone.
I've already made bucks of my existing working phone haha....but I'd still like to have kitkat in place. I believe the issue of my phone not reading MD5 confirmations would still be in place, does anyone know how to remedy that situation?
At the same time I'm more than happy to leave my phone as is.
Click to expand...
Click to collapse
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
flexfulton said:
Pretty sure you can turn off MD5 checks in TWRP. Probably in CWM too. Sorry if this has been mentioned. Didn't have time to read the whole thread. Just skimmed through.
2nd, there is a major difference between an IMEI that reads 0 and an IMEI that shows unknown. If it shows an unknown simply reflash your ROM and modem and you will be good to go. Sometimes a reboot is all you need. If your IMEI is showing a 0 on the other hand its gone and will require that it be injected back in which is a messy situation that usually results in tour phone being stuck on EDGE.
3rd, as someone mentioned on the previous page, restoring a working nandroid will NOT reinject your IMEI if it shows up as 0. No amount of flashing anything will get it to come back. Not even stock. It needs to be reinjected manually.
Click to expand...
Click to collapse
do you know of a good stable kit kat like ROM I could use for the s3? And any speculation as to why the ROMs werent taking for me?
Moderators, please forgive me in not in the right place...
Came home from a glorious week of camping and decided to check out some 4.4.4 ROM's on my phone...
Already running older version of C-ROM, so backed up and flashed the KK 4.4.4 version. That's where it the wheels came off my bus..
Phone booted so damn slow, then there were hundred's of FC's, rendering the phone unuseable. Rebooted, cleared Dalvik and Cache but same difference. The phone died, the battery would NOT charge! No matter what! Try as I may...NO GO!!! For hours! Feared it was that issue wherein the S3 motherboard dies and the phone has to be replaced by Samsung. Kept trying...finally get the phone to boot into TWRP. Whew!!! Still the phone kept complaining that the battery was dead. WTF?!
Restored the back up I had made...accidentally grabbed another backup from december of last year (Cyanogenmod), so had to recover my C-ROM back instead...RESTORE FAILS! Tried a few times but still failed. Tried to re-flash the latest C-ROM, but STILL fails...everything I'm trying fails.
I read the output and see an error, "Unable to wipe /system" ...found a thread where a user, using TWRP, had the same error with their ROM they were trying to flash. Eventually, the fix was to delete the make_4fs (or whatever it's called) from /sbin directory. Did so and was able to flash my Cyanogen, but could not restore my C-ROM backup. That STILL fails, however, no error in the live output while it's restoring. Just ends up Failing at the end of the restore process. The live logs indicate that it's using the 2fs (or whatever it's called), which was successful in flashing my Cyanogen ROM...why will it not restore my C-ROM back? :crying:
Any help would be greatly appreciated.
kojam said:
Moderators, please forgive me in not in the right place...
Came home from a glorious week of camping and decided to check out some 4.4.4 ROM's on my phone...
Already running older version of C-ROM, so backed up and flashed the KK 4.4.4 version. That's where it the wheels came off my bus..
Phone booted so damn slow, then there were hundred's of FC's, rendering the phone unuseable. Rebooted, cleared Dalvik and Cache but same difference. The phone died, the battery would NOT charge! No matter what! Try as I may...NO GO!!! For hours! Feared it was that issue wherein the S3 motherboard dies and the phone has to be replaced by Samsung. Kept trying...finally get the phone to boot into TWRP. Whew!!! Still the phone kept complaining that the battery was dead. WTF?!
Restored the back up I had made...accidentally grabbed another backup from december of last year (Cyanogenmod), so had to recover my C-ROM back instead...RESTORE FAILS! Tried a few times but still failed. Tried to re-flash the latest C-ROM, but STILL fails...everything I'm trying fails.
I read the output and see an error, "Unable to wipe /system" ...found a thread where a user, using TWRP, had the same error with their ROM they were trying to flash. Eventually, the fix was to delete the make_4fs (or whatever it's called) from /sbin directory. Did so and was able to flash my Cyanogen, but could not restore my C-ROM backup. That STILL fails, however, no error in the live output while it's restoring. Just ends up Failing at the end of the restore process. The live logs indicate that it's using the 2fs (or whatever it's called), which was successful in flashing my Cyanogen ROM...why will it not restore my C-ROM back? :crying:
Any help would be greatly appreciated.
Click to expand...
Click to collapse
Have you tried using ODIN to restore back to stock? If you can get the phone up and running, you may be able to restore from your old backups.
Bass_Man25 said:
Have you tried using ODIN to restore back to stock? If you can get the phone up and running, you may be able to restore from your old backups.
Click to expand...
Click to collapse
Thanks bud.
Oh, I got the phone up and running on the Cyanogen dated dec/2013.
ODIN? Never thought of it. Been such a long time. I do need to get stock on here so I can all the latest official radios etc, then put custom ROMs.
Been such a loooooong time since used ODIN though. Shouldn't be hard to get back on the horse.
Thanks for the suggestion!!!
any idea why this happened? anyone?
as an fyi, I tried to put the lastest SlimROM on but same difference. (i'm really pressed for time always. so I decided this is the quickest thing to try). seems the only thing that will flash is my Cyanogen from December. Strange...
Will have to give ODIN a try if I can ever get the time some day..
Odin shouldn't be a much longer process. Start flash, walk away. When you return 10 minutes to a few hours later, it'll be sitting there waiting for you, all nice and stock!
Anyway, one thing I dont recall seeing you tried is a factory reset. Chances are, that's what caused all your FC. Roms will always take a while on first boot. But all those FC were likely due to incompatible data. Then you may have encountered more data corruption as the system worked overtime trying to resolve all those conflicts.
Its purely a theory, but there's a good chance you will never be able to find exactly what caused all of your issues. Dont lose sleep over it is my best advice! A couple of tips though....
Never wipe/format system! Had you been able to successfully do so, and then nothing would still flash, there would no longer be an o/s to boot into! All roms will format your system partition as the first step in the flash, so there's just no need to do this manually. Most flash failures occur before the flash actually starts, meaning if there's a problem, most times you'll still be able to reboot normally.
Update your firmware. If its been a while since taking an ota or updating via Odin, you're probably on an older firmware build which is known to cause problems with many more recent roms. Most simply will not flash if not updated.
Also, by flashing your up to date firmware in Odin, you will likely fix any corruption which may have occurred on some of those partitions. Good chance you'll be able to flash whatever you want after an Odin firmware update and factory reset.
Hope that helps! Good luck!
DocHoliday77 said:
Odin shouldn't be a much longer process. Start flash, walk away. When you return 10 minutes to a few hours later, it'll be sitting there waiting for you, all nice and stock!
Anyway, one thing I dont recall seeing you tried is a factory reset. Chances are, that's what caused all your FC. Roms will always take a while on first boot. But all those FC were likely due to incompatible data. Then you may have encountered more data corruption as the system worked overtime trying to resolve all those conflicts.
Its purely a theory, but there's a good chance you will never be able to find exactly what caused all of your issues. Dont lose sleep over it is my best advice! A couple of tips though....
Never wipe/format system! Had you been able to successfully do so, and then nothing would still flash, there would no longer be an o/s to boot into! All roms will format your system partition as the first step in the flash, so there's just no need to do this manually. Most flash failures occur before the flash actually starts, meaning if there's a problem, most times you'll still be able to reboot normally.
Update your firmware. If its been a while since taking an ota or updating via Odin, you're probably on an older firmware build which is known to cause problems with many more recent roms. Most simply will not flash if not updated.
Also, by flashing your up to date firmware in Odin, you will likely fix any corruption which may have occurred on some of those partitions. Good chance you'll be able to flash whatever you want after an Odin firmware update and factory reset.
Hope that helps! Good luck!
Click to expand...
Click to collapse
What's up, Doc? Sorry for that...
I downloaded Odin this morning. I should have gotten the link from XDA. The site i got it from looked official, however, tons of endless pop-ups after I installed it. Freak!!!
Then found the xda links. Not sure which version to get because i didn't see which one handles the S3. The latest version (3.09) should, no?
As well, where do i get the stock ROM from? Forgive me for all these questions. Been extremely busy with work these past few months. No time to play around with my phone everything. I'm forgetting more than I know.
A full wipe was done. In TWRP, system was check (it's always checked) automatically when wiping to flash a new ROM.
Thanks again!
Everything you need is in my sig. Go to the firmware thread and the stock or root66 firmware listed there us what you flash in odin. Version 3.09 is fine btw.
DocHoliday77 said:
Everything you need is in my sig. Go to the firmware thread and the stock or root66 firmware listed there us what you flash in odin. Version 3.09 is fine btw.
Click to expand...
Click to collapse
Thanks!
S.O.S!!!
kojam said:
Thanks!
Click to expand...
Click to collapse
Downloaded the rooted firmware from your link and the ODIN (3.09)...
Flashed the firmware (making sure to get the correct one for WIND)...ODIN did it's thing...got a green pass...the phone rebooted...got the Samsung symbol, little swoosh animation, and the accompanying sound effect that goes with the swoosh-thing...THE PHONE NEVER BOOTED UP AN O/S!
Did it at about 11:30 last night, left it, got up this morn, and phone STILL in same status!
Found out that site where I downloaded the firmware had an issue last night. They posted this morn, apologizing to people about a D.O.D attack that may have caused dropped downloads. I downloaded the firmware again this morn, flashed with ODIN, got a pass....SAME THING!!! Phone
Had to quickly pack up my laptop to bring with me to the office. Will try the official, non-rooted firmware to see if I can get it to go.
Problems' that my team went from 12 to 2 people...my partner's off today...and I got a LOUD MOUTH across from me who WILL NOT leave me alone, no matter what I say or do. LOL.
Any suggestions?
In the words of George Costanza:
"I'm BACK, babyyyyyyy!!!!!"
The official firmware worked!
Phone's back online. Thanks for all your help. Will have to see about rooting later...as well, want to see how the battery operates on stock firmware. I've tried EVERYTHING under the sun to preserve batt life and NOTHING worked!!!
Tried EVERY KERNEL noted to be good on battery life, tried TONS of apps that were supposed to help, turned off as much as I could, etc....
batt still not good. I give up. Every diagnostic app says batt is very good. I dunno...
Earplugs! Lol! I definitely feel for you about your work status! Been there!
About the firmware though, if the download had been corrupted, it would've failed the initial check done by Odin. You are probably ok. Dont worry just yet!
If it is hanging up at the Samsung screen, you probably just need to factory reset. Almost always fixes this. (It happens due to incompatible data left from your previous rom)
This will wipe internal sdcard though, so if you haven't backed up yet, the next thing to fo is flash TWRP via Odin. You can then use its built in file manager to copy whst you need first. Or you can then flash an insecure kernel and use adb if you're familiar with that.
The Doc is in!
if the download had been corrupted, it would've failed the initial check done by Odin
Click to expand...
Click to collapse
That's EXACTLY my thought too. That was really perplexing...
I am up again...
Facotry Reset? How do I do that if stuck at the Samsung splash though?
Now that i know the official firmware works, maybe i'll, try again with the rooted firmware, try to factory reset when stuck, and continue to flash TWRP as you described above. Don't mind factory resetting. I've taken everything I need.
Oh!!!!
I noticed that all the apps I had before flashing the firmware are STILL on my phone. I would have thought that they would have been wiped out completely when lord ODIN was doing her thing.
....and battery life is STILL pretty bad...
Phone's been charging...became fully charged...unplugged it..it was down to 84% after only about 30/mins.
Will see how it goes after doing the factory wipe.
Again, how do i do a factory wipe if stuck at the Samsung swoosh after I re-flash the rooted firmware ?
Maybe your battery is dying. it happens. That would explain a big drop from the start.
To factory reset if you're stuck at boot up, turn the phone off, then boot up into recovery. Hold volume up, home and power. After it vibrates, release power only, continue holding the other two until you see recovery booting up.
If stock recovery is installed, choose factory reset.
In TWRP (probably similar in cwm) go to Wipe and choose factory reset there. In TWRP and CWM, factory resetting does not wipe your internal sdcard. Stock recovery will.
And as for Odin, it doesn't actually touch the user data partition, so all your apps and data are preserved. This is great when just upgrading from one build to the next, but is the reason a factory reset is required if coming from a non touchwiz rom.
---------- Post added at 03:59 PM ---------- Previous post was at 03:53 PM ----------
How old is your battery? The S3 is at the age where people who bought it when it was first released will start to notice the battery is beginning to degrade.
You can also get an app called Better Battery Stats here on xda (paid version in the play store). Its the goto utility for investigating problems with battery drain. Run it for a day after a full charge and then check its logs for persistent wakelocks. The app thread should explain its use better than I can, but if you are having trouble you can always post your bbs log here for one of us to look over. (This isnt my strongest area, but there are a few others around that may also be able to help. )
Hello team, I have a weird issue when booting my phone.
HTC M8 8Unlocked International version
This started after I installed Venom Rom 2.0.
It continuously made crash the systemui process so I thought something went wrong with the rom installation.
I reinstalled it, same thing.
I went back to Venom 1.8.0
Problem started:
When it boots I get the HTC white screen and then stays there forever. I thought it was stuck on the boot screen but if I press about 4 or 5 times the power button the screen refreshes and I can use the phone.
I have tested several things and noticed that after 2 minutes, when the HTC logo is there I can press the volume buttons and they actually work. Just the screen is not refreshing until I press several times the power button.
Here is what I have tried to fix this weird issue:
Did full clean with TWRP
I reinstalled Venom 1.7.1 same issue
Upgraded to 1.8.0 same issue
Installed insertcoin rom, same issue
Reinstalled TWRP (Advanced > Reflash Recovery) and went back to Venom rom, same issue
In TWRP I used the option Advanced > Restore Original Boot. Same issue
I did fix permissions. Same issue
At this moment I have no idea what else to try.
ADB and FastBoot are fully functional in my pc.
I noticed I cannot gain SU from ADB when the phone is on this state. As soon as I do adb reboot the phone returns in that state and once is connected back and I can see it using adb devices, the su command does nothing.
I want after fixing this thing to remove the red banner from the screen.
I would really appreciate any suggestions.
Have tried updating the firmware?
I had the long booting issue with custom Roms until I updated my firmware to 2.22.401.4
I think it's cause the latest updates of most the custom Roms run off that firmware and you might be running the older one.
You need to be S-off I think to flash firmware. And it might say you are on 2.22.401.4 in the phone settings but that might not be correct.
LinS123 said:
Have tried updating the firmware?
I had the long booting issue with custom Roms until I updated me firmware to 2.22.401.4
Though I had to get S-off to flash it.
Click to expand...
Click to collapse
Yeah I can't update it because I cannot get s-off since su is not working for me.
One last thing I just tried was installing an Odexed rom and the problem did not happen. This whole story started when using the stock rom, for no reason my phone started rebooting itself every 2 minutes. Then I installed venom and the problem went away.
I did find this odexed rom before to avoid the red banner which did the trick but the reboot problem came back. :crying:
So now I am just stuck trying to fix this with the custom rom
Well, you can try reverting to full stock and retry the entire root process from scratch.
The other way is to revert back to stock and wait for the new OTA to finally be pushed for the firmware update.
Try following this guide. It's written really well and should get you root access properly.
http://forum.xda-developers.com/showthread.php?p=53807690
Credits go to Vomer, the original writer of the guide; it's extremely well written and easy to follow.
EDIT: Posting from a phone is hard... Autocorrect is not always your friend.
LinS123 said:
Well, you can try reverting to full stock and retry the entire root process from scratch.
The other way is to revert back to stock and wait for the new OTA to finally be pushed for the firmware update.
Try following this guide. It's written really well and should get you root access properly.
http://forum.xda-developers.com/showthread.php?p=53807690
Credits go to the original writer of the guide, it's extremely well written and easy to follow.
Click to expand...
Click to collapse
I appreciate the response, I will try that and see what happens.
Just a heads up. Firewater is not guaranteed to work for S-off. It comes down to luck of the draw.
My M8 was an unlucky one so I had to find another way. I hope yours works with Firewater.
There is another tool called sunshine but it is $25, and it guarantees to S-Off any HTC One m8 variant, but I think I might just wait for the official firmware rather than spending $25.
Billchen0014 said:
There is another tool called sunshine but it is $25, and it guarantees to S-Off any HTC One m8 variant, but I think I might just wait for the official firmware rather than spending $25.
Click to expand...
Click to collapse
Thank you for this option as well. I did firewater and gave me the "you are unlucky" not-very-friendly banner LOL
I did it with Sunshine. (Yeah I paid the $25) Sometimes I do think paying the devs for good work is fine.
I can now remove the red banner
BTW. To close this thread. After flashing an Odexed rom the slowness went away, I went back to Venom 1.8.0 and it continued booting normally . Looks like there is kernel problem in my phone with certain roms.
Hello Everyone,
I've been up literally all night (I know, that old line) trying to fix what happened. I bought this phone last year. It was unlocked and rooted. I never updated because it was never giving me issues. But the lagging and battery has finally got to me. So I decided to upgrade to this new rom(http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-0-t3094423).
It looked clean and minimal bloat, just the way I like it. However, I didn't get past updating the Bootloader. As soon as I did in Odin it went into a bootloop. Try as I might I couldn't get into recovery. Luckily I can still get into download mode. So I read up and found that I should flash the original firmware. Unfortunately it failed because I tried to upload an older version. Is there anyway I can flash this rom via odin? Sorry for the noobish questions here but it's past 8am and I've just about given up. If I see recovery is not seandroid enforcing or rev check fail s6 device 3 binary 2 I'm going to lose my mind lol. I did have TWRP installed if that makes a difference. Just can't access it. Any help would be greatly appreciated. Thanks guys
P.S. I know I used buy instead of buy but can't fix it. It was really early in the morning haha
Ok I managed to download the stock MM version for my phone. I still have bootloop issues but I'm in recovery mode at least. However not TWRP though, if I try downloading a custom recovery it says the dreaded "recovery is not seandroid enforcing" also it says Device does not have DRK. Any guesses here?
Well, I've just about given up. I've searched extensively and it appears that the fix is to download a different kernel. However, the G925T has no support yet for any custom MM kernels. I made a backup of my phone via TWRP before this whole mess but the problem is I can't get to it. And to be honest I'm not entirely sure if it's still there. Here are the steps I have taken thus far.
1. Downloaded MM Bootloader: this was the start of my issues. Started bootloop, couldn't get into recovery.
2: Attempted to download original LP firmware: Odin denied it, there was another version I download from zidroid called "downgradeable". Obviously did nothing because I was still running MM bootloader and was effectively the same thing.
3. Downloaded stock MM firmware: Finally was able to boot into recovery but it was useless as it was the stock one. Also wouldn't boot up due to "Device does not have DRK" and boots straight into download mode. Tried to download recovery but none of them worked. Kicked me back to "Recovery not Seandroid enforcing".
So this is where I'm at, I just want to get back to my old device I honestly would rather have a clunky phone than one that doesn't work at all. Is it possible to downgrade back to LP and get back into TWRP and flash my backup? Do I still have root after taking all those steps? Any help would be greatly appreciated because this has officially ruined my weekend?
I guess I'm talking to myself here but if anyone ever encounters this issue at least it will be documented if I ever do fix it.
I managed to get into TWRP. Although arter doesn't have a kernel that supports our system yet. The twrp recovery he has does, ours is compatible with the fi variant. Again that's only the recovery no the kernel.
So I was at a cross roads, do I restore my backup or do I continue with the download. Unfortunately none of those options worked. When restoring the backup I get stuck on the samsung page with "kernel not enforcing" or whatever. Do be fair, before I did this with my device it had already said that. So I gave it some time, but alas no luck. And the same issue with the when I tried to continue the download. I'm a little lost as to how to continue now. I just want my device back.
try dd the mm firmware
Nickle60 said:
I guess I'm talking to myself here but if anyone ever encounters this issue at least it will be documented if I ever do fix it.
I managed to get into TWRP. Although arter doesn't have a kernel that supports our system yet. The twrp recovery he has does, ours is compatible with the fi variant. Again that's only the recovery no the kernel.
So I was at a cross roads, do I restore my backup or do I continue with the download. Unfortunately none of those options worked. When restoring the backup I get stuck on the samsung page with "kernel not enforcing" or whatever. Do be fair, before I did this with my device it had already said that. So I gave it some time, but alas no luck. And the same issue with the when I tried to continue the download. I'm a little lost as to how to continue now. I just want my device back.
Click to expand...
Click to collapse
Not sure what state your phone is in. To begin with, the not Seandroid message with recovery is normal, if you are on marshamallo. If you are on LP then you get the same with the Kernel message when it boots up. BOTH are normal depending on which Firmware you are on. But that said you shouldn't be trying to downgrade, if that's even possible. Have you tried smartswitch and the emergency software restore function. It will wipe out everything on your phone but at least will boot up with the latest MM. Then simply Odin the arter TWRP and then install XTRESTOL which I am using NO PROBLEMS on my TMobile 925T variant. NOT sure about the DRK root key problem. But when you install stock MM with smartswitch you should have also gone into settings and enable developer settings to make sure OEM unlock was enabled before doing anything else.
Lastly, the Arterkernel will actually work fine as far as booting up. The ONLY issue is call audio which we all are waiting for a patch, or a kernel that supports everything. But, I have TWRP installed that arter kernel, and the phone boots up just fine. You just do NOT have call audio. My suggestion at this point is smartswitch. Just know your serial number so that when asked you can plug that in to the menus smartswitch goes thru before wiping and restoring current MM latest and greatest.
Docmjldds said:
Not sure what state your phone is in. To begin with, the not Seandroid message with recovery is normal, if you are on marshamallo. If you are on LP then you get the same with the Kernel message when it boots up. BOTH are normal depending on which Firmware you are on. But that said you shouldn't be trying to downgrade, if that's even possible. Have you tried smartswitch and the emergency software restore function. It will wipe out everything on your phone but at least will boot up with the latest MM. Then simply Odin the arter TWRP and then install XTRESTOL which I am using NO PROBLEMS on my TMobile 925T variant. NOT sure about the DRK root key problem. But when you install stock MM with smartswitch you should have also gone into settings and enable developer settings to make sure OEM unlock was enabled before doing anything else.
Lastly, the Arterkernel will actually work fine as far as booting up. The ONLY issue is call audio which we all are waiting for a patch, or a kernel that supports everything. But, I have TWRP installed that arter kernel, and the phone boots up just fine. You just do NOT have call audio. My suggestion at this point is smartswitch. Just know your serial number so that when asked you can plug that in to the menus smartswitch goes thru before wiping and restoring current MM latest and greatest.
Click to expand...
Click to collapse
Thanks for the reply, I don't have the box for the phone and couldn't boot it up so that was a no go. But luckily for me I decided to give that rom one more go. I flashed bootloader and modem again, then flashed TWRP, and finally installed the rom. And boom! It worked, and it's better and faster than ever. I'm not sure what all that other mess was but I am going to say I have everything I need at the moment and won't be flashing anything anytime soon. I've learned a great deal through this process though. Thanks for everyone's help.