I search for status 7 aborted solutions
I found bcoz of old version of cwm unable to install custom rom
So updated cwm to 6.0.5.1 and philz tourch 6.58.7 then also facing same issue
Please help
Currently
I am on stock rom and kernel
Ie 4.2.2 jellybean
Also attaching 2 images 1 or old cwm with same issue and 1 updated cwm
Should try factory reset option? ??
sushantraje2000 said:
I search for status 7 aborted solutions
I found bcoz of old version of cwm unable to install custom rom
So updated cwm to 6.0.5.1 and philz tourch 6.58.7 then also facing same issue
Please help
Currently
I am on stock rom and kernel
Ie 4.2.2 jellybean
Also attaching 2 images 1 or old cwm with same issue and 1 updated cwm
Should try factory reset option? ??
Click to expand...
Click to collapse
---
Install ClockworkMod recovery with SELinux support. Older CWM will result in a "status 7" error.
Take a look at the Installation part.
But before take a full backup.
datarster said:
---
Install ClockworkMod recovery with SELinux support. Older CWM will result in a "status 7" error.
Take a look at the Installation part.
But before take a full backup.
Click to expand...
Click to collapse
tried not working
or suggest me any rom 4.4
AOSP/CM
give me link please
i want to try this
http://forum.xda-developers.com/showthread.php?t=2564504
sushantraje2000 said:
or suggest me any rom 4.4
AOSP/CM
give me link please
i want to try this
http://forum.xda-developers.com/showthread.php?t=2564504
Click to expand...
Click to collapse
You can try CM 11
link
Or AOSB ProBAM KK
link
I personally suggest go with CM 11, which is pretty stable and fast.
datarster said:
You can try CM 11
link
Or AOSB ProBAM KK
link
I personally suggest go with CM 11, which is pretty stable and fast.
Click to expand...
Click to collapse
thanks done finally i re download all stuff now it working
but each time faced this issue when i update rom or install new one
it always shows Play store stop working
always i need to do factory reseat
Related
Hi Friends
Please help me
I m using currently Stock Rom 4.4.2 Kitkat India NE1
I installed philz touch recovery and try to install DN3v 3.2 stable bye electron team but it got stuck in aroma installer .
Many times i tried but same problem persist Now my phone becomes unusable .
Your help would be highly appreciated
Thanks
Saurabh
caguptasaurabh2013 said:
Hi Friends
Please help me
I m using currently Stock Rom 4.4.2 Kitkat India NE1
I installed philz touch recovery and try to install DN3v 3.2 stable bye electron team but it got stuck in aroma installer .
Many times i tried but same problem persist Now my phone becomes unusable .
Your help would be highly appreciated
Thanks
Saurabh
Click to expand...
Click to collapse
Switch your recovery to TWRP 2.6.3.2 or 2.7.0. You can find links to either of them in my signature. Click on jelly Kat FAQ version 4&5 and you'll find links to TWRP.Download the zip file of TWRP recovery and flash it using your existing philz recovery and then try flashing the DN3 ROM. BTW I've been using their V5+ version and was happy with it. Their latest release is V5.2 so give it a try. The release you are trying to flash is Jelly Bean version not Kit Kat version.
singhpratik87 said:
Switch your recovery to TWRP 2.6.3.2 or 2.7.0. You can find links to either of them in my signature. Click on jelly Kat FAQ version 4&5 and you'll find links to TWRP.Download the zip file of TWRP recovery and flash it using your existing philz recovery and then try flashing the DN3 ROM. BTW I've been using their V5+ version and was happy with it. Their latest release is V5.2 so give it a try. The release you are trying to flash is Jelly Bean version not Kit Kat version.
Click to expand...
Click to collapse
Thanku pratik for ur reply
But i wana know one thing i wana use v3.2 as it is stable. So can i update from Kitkat to Jelly bean
caguptasaurabh2013 said:
Thanku pratik for ur reply
But i wana know one thing i wana use v3.2 as it is stable. So can i update from Kitkat to Jelly bean
Click to expand...
Click to collapse
You mean downgrade from kitkat to jellybean,since kitkat is newer to jellybean.Yes you can go back and forth between Kitkat and Jellybean custom ROM whenever you like.
Custom Recovery / ROM
Team,
I am trying to Root my phone for custom ROM - on my note 2 n7100. I tried to flash using ODIN 3,9 version and had TWRP 2.7 version. Tried to boot but getting Stock Android Recovery mode rather TWRP mode.
Any help would be appreciated.
Thanks,
Mike
Hello.I'm using this rom for more than a year now
http://forum.xda-developers.com/showthread.php?t=2052610
I also have clockworkmod v5.8.4.0.I have searched through all the guides and threads and i can not find how to update to the latest touch recovery (and where to download it).I also have rom manager installed but it does not recognize which recovery i have installed.And i would like to install a kit kat rom and i dont know which recovery supports this rom.Thanks
Spyrious said:
Hello.I'm using this rom for more than a year now
http://forum.xda-developers.com/showthread.php?t=2052610
I also have clockworkmod v5.8.4.0.I have searched through all the guides and threads and i can not find how to update to the latest touch recovery (and where to download it).I also have rom manager installed but it does not recognize which recovery i have installed.And i would like to install a kit kat rom and i dont know which recovery supports this rom.Thanks
Click to expand...
Click to collapse
Here:
Flash it via fastboot.
Thanks.Will this recovery work for a kit kat rom?
Spyrious said:
Thanks.Will this recovery work for a kit kat rom?
Click to expand...
Click to collapse
Yes of course.
Tap via Tapatalk
Thanks again.I suppose i can flash the miui kitkat i downloaded from the official miui site directly now to the phone,correct?
Spyrious said:
Thanks again.I suppose i can flash the miui kitkat i downloaded from the official miui site directly now to the phone,correct?
Click to expand...
Click to collapse
Try it..if you able to flash that rom just come back here and say thanks to me [emoji1]
Just kidding.
Tap via Tapatalk
So i tried some cm11 kitkat 4.4.4 roms.But im not 100% satisfied.Im going to install an official cm rom.I'm following this guide
http://wiki.cyanogenmod.org/w/Install_CM_for_endeavoru
does anybody know wich android version this rom is?Thanks
Hi there! I tried to find something about it but o didn't find...
I'm actually with the CWM 6.0.1 and I want to update it to 6.0.4.5 to flash some new ROMS. Can someone help me?
eijigen said:
Hi there! I tried to find something about it but o didn't find...
I'm actually with the CWM 6.0.1 and I want to update it to 6.0.4.5 to flash some new ROMS. Can someone help me?
Click to expand...
Click to collapse
Try this app.
I tried this one but it says that my device is not compatible...
I am actually with a Xperia Acro S, running CM 10. I want to flash the CM 11 but as my CWM is outdated i keep receiving the status 7 error
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
zohaibkhan143 said:
Facing wifi problem on every custom rom I installed on my LG optimus G pro..
Working perfect on stock based roms.. Anybody know whats the issue ? Using cwm 6..0.4.7 and new phillz touch recovery to install roms but facing same problem.. When phone take first boot after installation the wifi is working but after some hours or next reboot the wifi will no more working.. Found something in build.prop
ro.wifi,channels= "blank"
I put some values of channel in it but it wont work
Plz help me..
Sorry for bad english
Click to expand...
Click to collapse
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
help
culot said:
It's not unusual for that entry in the build.prop to be blank, and shouldn't cause issues. I think the default there should be '11 11', though having it blank should be fine (pretty certain).
> Working perfect on stock based rom
Which roms are you flashing that are giving you problems? Many of the e980 roms are bugged out in various ways, maybe it's just a quirk of the one(s) you flashed? I had a similar problem recently, wifi just would *not* stay enabled, would not behave. I don't remember which rom it was though; I flash too much.
You've flashed the Kitkat 20g modem, yes? If all else flails, you could always flash back to Kitkat stock and start over, that's guaranteed to tell you whether its a hardware or software problem (if it persists after that: hardward, got to be).
Click to expand...
Click to collapse
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
zohaibkhan143 said:
thanks for reply
I installed cm11 cm12 blisspop v1.0 1.1 .12 1.3 all these roms got same problem that is wifi
I m on JB 4.1.2 stock e98010p a&t
there is no wifi bugs in these custon roms.. only me facing this issue in every custom rom... Can u give me the kitkat firmware link e98020g ? I m gonna flash that rom then I will root my device on KK then I will try to flash custom roms and tell you about results.. thanks
plz provide link..
sorry for bad english
Click to expand...
Click to collapse
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
help
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
Ok bro thanks for helping me
zohaibkhan143 said:
Ok bro thanks for helping me
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
culot said:
Booyah: E980 20g Kitkat TOT.
Also, with Lollipop roms, I don't think any of them are totally stable or functionally 100% yet, so that's not a place to go if you want stuff to work. There's plenty of nice Kitkat roms like PAC-rom or Carbon-Rom is you want stability and want for your phone to work fully (but thats no fun! ).
Click to expand...
Click to collapse
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
zohaibkhan143 said:
bro I installed stock Kk and root my device but I unable to install cusom recovery using freegee app.. Any other way to install custom recovery ?
Click to expand...
Click to collapse
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Thanks I will try it soon..!
culot said:
Yoink.
^-- Freegee never lets me in unless I flash the Sphinx GPro Recovery CWM recovery first. Once that is done, it's all good.
Click to expand...
Click to collapse
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
zohaibkhan143 said:
Installed sucesfully but one problem in this cwm..external_sd mounting failed cwm ver 6.0.4.4
help plz
Click to expand...
Click to collapse
Oh, no, you misunderstood: you don't use the CWM, you only install it and then quickly install *over* it with one of Freegee's recoveries. Never use the Sphinx CWM, as you'll get errors when you go to flash roms. You only insatll the Sphinx CWM so that Freegee will recognize your device and function, it's only a stepping stone to Freegee, not a recovery you should use on its own.
And, in light of recent developments on the TWRP 2.8 front, I'd say give that a try instead. It mounts your external SD just fine. THe only things I've flashed with it are BlissPop builds and Gapps, but all without an issue yet. Go for the one with the Play theme and enjoy its gorgeous colors.
Thanks buddy.. Freegee recognized my device and installed cwm succesfully
Sent from my LG-E980 using XDA Free mobile app
help
after kitkat update now I m installed those custom roms again but still there is a same wifi problem sick off totally !
In advance i'm new to XDA so if i break any rules or guidelines please let me know
Hi,
I rescently flashed my HTC One x(International) to CM12 using the video on onexroot . com site (XDA wont let me post a ousite link because i'm new -_-)
I had to flash a new recovery with a new layout and then flash the CM12 rom. So i installed the rom and it runs great (minus the known issues). So i was looking around and i saw that there was a newer version of the cm12 rom with bug fixes and what not so i wanted to update it but since i flashed the new recovery and rom i can't flash any CM12 based rom any more, when i try i get the errorERROR EXECUTING UPDATER BINARY IN ZIP i tried many different roms to make sure it wasn't a rom related issue and i used MD5sum checker to make sure the download wan't broken but i keep getting the error. So i'm hoping one of you can help me. (phone info below)
Htc One x (International)
Hboot 1.72.0000
Recovery TWRP v2.8.5.1 HOX Team Big
ROM CM12 -12-201550214-UNOFFICIAL -endeavoru
jg1337 said:
In advance i'm new to XDA so if i break any rules or guidelines please let me know
Hi,
I rescently flashed my HTC One x(International) to CM12 using the video on onexroot . com site (XDA wont let me post a ousite link because i'm new -_-)
I had to flash a new recovery with a new layout and then flash the CM12 rom. So i installed the rom and it runs great (minus the known issues). So i was looking around and i saw that there was a newer version of the cm12 rom with bug fixes and what not so i wanted to update it but since i flashed the new recovery and rom i can't flash any CM12 based rom any more, when i try i get the errorERROR EXECUTING UPDATER BINARY IN ZIP i tried many different roms to make sure it wasn't a rom related issue and i used MD5sum checker to make sure the download wan't broken but i keep getting the error. So i'm hoping one of you can help me. (phone info below)
Htc One x (International)
Hboot 1.72.0000
Recovery TWRP v2.8.5.1 HOX Team Big
ROM CM12 -12-201550214-UNOFFICIAL -endeavoru
Click to expand...
Click to collapse
have you tried to manually flash the update zip?
you said it happened also on other roms, are they all new layout roms? always tried with the same recovery?
lukes91 said:
have you tried to manually flash the update zip?
you said it happened also on other roms, are they all new layout roms? always tried with the same recovery?
Click to expand...
Click to collapse
Yes the roms are all CM 12 so with the new layout and no i have not tried manually flash the update zip. mainly because i don't know what it is and how to flash it.
and thanks for your reply .
jg1337 said:
Yes the roms are all CM 12 so with the new layout and no i have not tried manually flash the update zip. mainly because i don't know what it is and how to flash it.
and thanks for your reply .
Click to expand...
Click to collapse
I think it's enough to download it and flash it in recovery, just like a rom
lukes91 said:
I think it's enough to download it and flash it in recovery, just like a rom
Click to expand...
Click to collapse
Where can i get this update file ? is it located in the rom folder or ?
jg1337 said:
Where can i get this update file ? is it located in the rom folder or ?
Click to expand...
Click to collapse
the update file of a rom is released by the rom developer... check in the rom thread...
lukes91 said:
the update file of a rom is released by the rom developer... check in the rom thread...
Click to expand...
Click to collapse
Oh well i think i'm in a bit of a pickle then. I didn't download it from the developer but from the link provided by the video tutorial. I don't know where the maker of the video got it from. Unless there is a global updater i will try to contact the maker of the video for the source. Thanks