Hello,
This thread just to share two roms I made from original kdz D80220H.
I've tested each, installed from TWRP 2.8.1.1, after wipe system,data,cache and dalvick.
Both can be flashed on 16Go or 32 Go device.
---
The first one is a pure stock rom without root and with the stock recovery,that can be flashed from a custom recovery.
Root and custom recovery will be lost after the flash of this one .
For the root, for my part, I let TWRP 2.8.1.1 do so by following, by accepting the proposal he made to me at my request to reboot system after the flash. I was so easily rooted again.
For the custom recovery, the patched kernel does not yet exist for this version, installing a custom recovery you would lose the benefit of the news that may contain the kernel of this new firmware version.
Download link of this pure stock rom D80220H open eur, without root and with the stock recovery:
https://www.androidfilehost.com/?fid=95784891001610945
---
And the second is the same, but prerooted (SuperSu preinstalled) and allowing to keep the custom recovery.
Custom recovery will be kept after the flash of this one .
It's prerooted and with 20D Knock code Cloudyfa kernel integrated (simple stock KC kernel, just patched).
This pure stock rom D80220H open eur, prerooted and friendly custom recovery can be downloaded here:
https://www.androidfilehost.com/?fid=95784891001611050
---
Thank's to:
@thecubed for his [python][Tool] LG Compressed KDZ Extractor
@cybojenix for his tool (system merger)
@bullghost for his windows GUI version [TOOL] KDZ and TOT Extractor
and for the one prerooted, friendly custom recovery:
@Cloudyfa for the kernel and permission to integrate it, @bender_007 and @citytrader for their advice for the integration of patched kernel, @autoprime for his ioroot25 that inspired the way I proceeded to preroot, @Chainfire for his SuperSu
---
Info, explanations:
To have a custom recovery in the G2 in KK version, we need to have a downgraded bootloader in JB version, and a patched kernel for being able to boot behind this bootloader.
Downgraded bootloader, because KK bootloader was patched by LG to stop the loki exploit (http://forum.xda-developers.com/showthread.php?t=2292157, https://github.com/djrbliss/loki). So we have to use the one that is lokiable, the JB one.
The patched kernel (https://github.com/JackpotClavin/an...mmit/7b6187a0e5fb8ca59888cacf5f5b863baa8d1064) can only be produced if the sources were published, and it is not the case for 20H. The latest version released back to the 20D:
https://www.lg.com/global/support/opensource/opensourceList?types=ALL&search=d802.
However, the latest patched kernel available (the one containing knock code) should work fine.
But if changes (improvements) were made on the 20H (I do not know if this is the case, and I don't think it is), the benefit of these innovations would be lost with the installation of an older kernel.
Note: It was the same situation with the 20f and the 20G.
Reference:
http://forum.xda-developers.com/showthread.php?t=2667227
http://forum.xda-developers.com/showpost.php?p=56082714
note:
Recently codefire team realized a new way to get around locked bootloader.
This system (BUMP) allow to keep the bootloader in kk version but obliged to bump kernel and recovery.
What are the differences?
kpyhere said:
What are the differences?
Click to expand...
Click to collapse
between ?
G and H of course
kpyhere said:
G and H of course
Click to expand...
Click to collapse
One letter
More seriously, for the moment I don't know. New version, new flash
in this can we get stock kernel because other kernels are always a battery burner for me
It's prerooted and with 20D Knock code Cloudyfa kernel integrated (simple stock KC kernel, just patched).
This pure stock rom D80220H open eur, prerooted and friendly custom recovery can be downloaded here:
https://www.androidfilehost.com/?fid=95784891001611050
Click to expand...
Click to collapse
mor_1228 said:
in this can we get stock kernel because other kernels are always a battery burner for me
Click to expand...
Click to collapse
It's the stock kernel, in a 20D version.
I just gave all explanations about that in OP.
If i flash the no root version after i can root my device with towelroot?
Pilone92 said:
If i flash the no root version after i can root my device with towelroot?
Click to expand...
Click to collapse
It was reported that towelroot no more works in 20G, so we can imagine it doesn't in 20H too.
ioroot works well, i tried it, with adb sideload.
It was reported that stump root worked too, in 20G, I don't know with 20H.
is anybody know whats the cl from 20f to 20h? or its just small apps updates?
I still have root after flash this because the recovery flashed after super su
Inviato dal mio nexus 7 utilizzando Tapatalk
@6ril1... Can somboons debloater zip be flashed on this rom?
mab71 said:
@6ril1... Can somboons debloater zip be flashed on this rom?
Click to expand...
Click to collapse
I don't use it but if you look at the updater-script (in the zip) it just deletes apps (and .odex when need) in /system and /data, so it should work, i think.
6ril1 said:
I don't use it but if you look at the updater-script (in the zip) it just deletes apps (and .odex when need) in /system and /data, so it should work, i think.
Click to expand...
Click to collapse
Yes.. It did work. Thanks
Is there any benefit on upgrading from the G version to the H version? Is one more stable than the other or are they roughly the same?
Sent from my LG-D802 using XDA Free mobile app
It's more fluid.
Baseband is updated too?
6ril1 said:
I don't use it but if you look at the updater-script (in the zip) it just deletes apps (and .odex when need) in /system and /data, so it should work, i think.
Click to expand...
Click to collapse
hi 6ril1, I flashed the zip debloater of somboons and it seems go well for your rom :good:
I wanna thank you for your work and for rom prerooted expecially :fingers-crossed:
I also tried smallnavbar mod of somboons but it doesn't work, g2 goes in bootloop
PYCON said:
Baseband is updated too?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
gasReal said:
I also tried smallnavbar mod of somboons but it doesn't work, g2 goes in bootloop
Click to expand...
Click to collapse
Hi, why not making your own ?
http://forum.xda-developers.com/showthread.php?t=2657864
6ril1 said:
Hi, why not making your own ?
http://forum.xda-developers.com/showthread.php?t=2657864
Click to expand...
Click to collapse
I'm not able to, sorry :crying:
I'm not english man
Related
Stock KitKat Kernel
Info
You guys already know our G2's issue with LG's official KitKat upgrade. It forces us to use the new bootloader which is loki-killer, that means no custom recovery (CWM, TWRP, Philz), no custom kernel anymore. Right now there's no way to bypass that new bootloader in order to install those stuff. Anyway we still have a workaround to deal with that issue by patching the new kernel so it can work with the old bootloader (which still has loki support) thanks to @JackpotClavin, @Savoca, @xdabbeb
Upgrade to KitKat
For best experience with KitKat, you should follow these steps:
Upgrade to KitKat first (KDZ/TOT/OTA)
Root by ioroot25
Use AutoRec to have recovery
Then you can flash any ROM you like
*D801 must root before taking KitKat OTA
Return To JellyBean
It's real simple when you wanna return to your old ROM or your NAND backup (JB base). All you need is downloading the old JB Baseband and flash it, then your ROM / backup. You can find old JB Baseband here in @autoprime 's thread: http://forum.xda-developers.com/showthread.php?t=2451426
White lines issue
Some devices use different panel hardware (JDI instead of LGIT) and you will have white lines after using patched kernel. You must use those kernel with "_jdi" in its name. More info: http://forum.xda-developers.com/showpost.php?p=52414185&postcount=122
Download
Patched Kernels
KitKat BaseBand
*Special thank to all the DEVs here in XDA that involved in the KitKat research.
XDA:DevDB Information
[KERNEL] Stock KitKat kernels & White Lines issue fix, a Kernel for the LG G2
Contributors
Cloudyfa, Savoca
Kernel Special Features: Working with Old Bootloader
Version Information
Status: Stable
Created 2014-03-14
Last Updated 2014-05-04
Wow great work you guys. Thank you very much!
Sent from my VS980 4G using XDA Premium 4 mobile app
A noob question, what if, after update to KK baseband an ROM, want to go back to JB.
Is it enough just to flash JB ROM/restore JB backup ROM or need to restore via download mode + JB's kdz file?
Quick question, since in the d803 canadian g2 on 4.2.2 i can flash tmo d801 basebands just fine and they work excellent, would it be a possibility for you to make a test d803 canada kitkat kernel so we can test with tmo 4.4 basebands?
Sent from my LG-D801 using XDA Premium 4 mobile app
Tried this with the G Pro 2 port. Works awesome! Uber stock Rom, root and recovery, can't be better.
So i just have to flash the KK Baseband ? ( I am on Philz with Stock 4.2.2 ) . Then just download any rom and flash via Philz ? and then i can go back to my nandroid of 4.2.2 ?
Do i need to flash the patched kernel as well ?
Question: when I have already 4.4.2 rooted I must go back to 4.2.2 and flash kit Kat with root and kernelpatch?
Send from G2 flex
Thanks a lot for this!
I guessing that if we flash one of the root patched Stock ROMs all we need do is flash the ROM, then the patched kernel, then reflash the recovery again. Once done it should all work as before?
Lowresolution said:
So i just have to flash the KK Baseband ? ( I am on Philz with Stock 4.2.2 ) . Then just download any rom and flash via Philz ? and then i can go back to my nandroid of 4.2.2 ?
Do i need to flash the patched kernel as well ?
Click to expand...
Click to collapse
+1
This is a thread for devs to use these in their KK Roms. Do not just flash this in recovery with any random KK rom. Wait for devs to release new Roms
wargreymon89 said:
Tried this with the G Pro 2 port. Works awesome! Uber stock Rom, root and recovery, can't be better.
Click to expand...
Click to collapse
plz say step by step your way
So, first we need to flash baseband, then ROM, and after that modified kernel ? Is this the regular order ?
work!!
I use TWRP
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step by step please, not only it works or something like this
Sorry to ask again: any change to get LS980 running with KK?
what i dont understand. in OP stand, at first to Flash the KK baseband.....
But when i Flash a kitkat Rom, the KK baseband will be installed automaticlly. Logical.
i write how i would Flash, maybe others correct my idea:
- stock 4.2.2 Rom
- root it
- Flash recovery
- install KK Rom (give enough on Forum)
- Flash the Special kernel.
- reboot
- Flash you recovery as u do it on 4.2.2
is that correct?
Step by step by this guide. http://forum.xda-developers.com/showthread.php?t=2666967
Sent from my Nexus 7 using Tapatalk
@Cloudyfa i flashed successfully with twrp 2.7.0 without any errors at all working just fine here ! i guess we can add twrp to the supported recovery list
shriom_manerker said:
@Cloudyfa i flashed successfully with twrp 2.7.0 without any errors at all working just fine here ! i guess we can add twrp to the supported recovery list
Click to expand...
Click to collapse
I am 2.6.3.3 and 2.7 successfully too.
shriom_manerker said:
@Cloudyfa i flashed successfully with twrp 2.7.0 without any errors at all working just fine here ! i guess we can add twrp to the supported recovery list
Click to expand...
Click to collapse
somboons said:
I am 2.6.3.3 and 2.7 successfully too.
Click to expand...
Click to collapse
Nope, if you just flash your device's kdz (extracted system) or moded one, its not a problem. But it's a pain when dev wanna overwrite something in their flashable patch. Only Philz have no issue for KK right now.
@ ALL: If you're posting here asking for a guide, you're doing something very wrong, this thread aims to DEVs only. If your favourite DEV didnt upgrade his ROM to KK yet, or still using the new bootloader (lost recovery), you just need to point this thread to him so he can know all the needed info and update his new version with a working recovery and remove all useless parts inside.
delete
For the reasons I have sorry guys
Painfull english..
Is this-it's the same rom then Grola ROM 5.0.1 V2 ?
Ganjax said:
Painfull english..
Click to expand...
Click to collapse
Painful mate. Painful. By the way good news
samtab37 said:
Is this-it's the same rom then Grola ROM 5.0.1 V2 ?
Click to expand...
Click to collapse
no that is stock rom just for D802
Its not officially out for d802 until the end of the month! How is this official in any way?
Sent from my Spiderio D802 G2
Is there the possibility of recording in 4K, slow motion and reading sms you it works perfectly well like CloudyG3 rom? Tanks
Supracer said:
Its not officially out for d802 until the end of the month! How is this official in any way?
Sent from my Spiderio D802 G2
Click to expand...
Click to collapse
This is the 5.0.2 ROM Lollipop Original Home Of G2 D802
Temporary this is the only way to 5.0.2, there are no KDZ firmware.
The developer version is.I can not find a better means
samtab37 said:
Is there the possibility of recording in 4K, slow motion and reading sms you it works perfectly well like CloudyG3 rom? Tanks
Click to expand...
Click to collapse
ََAll app Is good works no problem .but is stock bro no custom
p_a_r_s_a7 said:
This is the 5.0.2 ROM Lollipop Original Home Of G2 D802
Temporary this is the only way to 5.0.2, there are no KDZ firmware.
The developer version is.I can not find a better means
ََAll app Is good works no problem .but is stock bro no custom
Click to expand...
Click to collapse
Because reading sms is mispronounced on Grola ROM, do you can try this feature ?
p_a_r_s_a7 said:
HI guys
Special thanks to @hoangnova
5.0.2 International Lollipop Stock G2 D802
This package helps you quickly experience Android 5.0 Lollipop quickly.
This is the 5.0.2 ROM Lollipop Original Home Of G2 D802
- Support TWRP Recovery 2.8.5.0 - Recovery run directly to Android 5.0.2 Lollipop G2 D802 (bumped)
- Stock governmental V30a
- Temporary this is the only way to 5.0.2, there are no KDZ firmware.
The root stockzip not available. The partition was originally taken root partition. After StockZIP flash through recovery, wanted to take root more flash SuperSU - Click to download.
Stock ROM format that is original, intact and original app issues such as keyboard, message.
Instructions:
In recovery, zip up, 3 wipe.
Up SuperSU more if need root.
Reboot.
LG G2 D802 V30A Lollipop Android 5.0.2:
MD5: bf41b6cc28c47571064dc10aef93d7d7
Fshare:https://www.fshare.vn/file/6JXT1FQ6BRNO
Mega:https://mega.co.nz/#!3d8RUDyB!f8z_GvJmMi4OTxHOivRUqlqnpOT8FEYLCuh6EsJ54Kg
Additional Details:
- Showing 4.4.2 or 4.4.2 rom that background. Being root, recovery (if not, according hd root on lgviet D802).
- Download the article SuperSU
- Download the rom zip D802 stock G2 Android 5.0.2 in all
- Copy SuperSU and rom zip to internal memory
- Flash rom zip under hd, do not restart
- Flash to SuperSU
- 3 wipe (wipe data, cache, Dalvik-cache)
- Reboot
Note - Warning:
4.4.2 Want to follow one of the following two ways, not directly on the flash ROM 4.4.2 Background 5.0.2 this.
Option 1.
KDZ on 4.4.2 then perform root, rec from first row then install 4.4.2 rom (eg cloudy such ROM)
Method 2.
Reset AutoRec the D802 then copied into memory in ROM 4.4.2 and proceed further to take steps in accordance hd 4.4.2 ROM installation of ROM.
If you feel unsure how to follow the safe one.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
coming soon new rom for All variant LG G2 the @hoangnova
Click to expand...
Click to collapse
Thanks for sharing!
I suppose this Rom still don't have fm radio app, right?
Enviado do meu LG-D802 através de Tapatalk
samtab37 said:
Because reading sms is mispronounced on Grola ROM, do you can try this feature ?
Click to expand...
Click to collapse
because Grola base is korea but that is base International so not problem sms
vladmir said:
Thanks for sharing!
I suppose this Rom still don't have fm radio app, right?
Enviado do meu LG-D802 através de Tapatalk
Click to expand...
Click to collapse
I not test. but Rom IS Stock D802 International no problem sms no problem fm radio
where did you find stock d802 firmware i see that this is differtent than other ports becouse in screenshots baseband is showing correct number insted of unknown
Please i can't understand half of what you wrote .. try to speak proper english mate.
So is this ROM for daily use or like Grola ?
I didn't understand the steps too, should i flahed it normally if i'm on stock 4.4.2 ? And it will change my bootloader or not?
Sent from my LG-D802 using XDA Free mobile app
No,grola is a mear port from F320. This is official 5.0.2 for D802. I'll provide feedback as fast as i can.
https://translate.google.com/transl...oc-te-d802-co-root-recovery.39074/&edit-text=
Can we flash it directly if we are already on any Lollipop Rom?
Any testers out there?
I'm on FluffyRom Stock 5.0.1 . Can it be flashed directly or should I go back to 4.4.2?
you need to be on a KK based rom.
I'm making proper backups now and will test it. I already downloaded it
kimitza said:
you need to be on a KK based rom.
I'm making proper backups now and will test it. I already downloaded it
Click to expand...
Click to collapse
Great, will wait for it. Quick way to check if this is the real deal: see if it has fm radio. If it doesnt, well then you know what it means
metteduch said:
Great, will wait for it. Quick way to check if this is the real deal: see if it has fm radio. If it doesnt, well then you know what it means
Click to expand...
Click to collapse
It means ?
Sent from my LG-D802 using XDA Free mobile app
LG G3 D851 Lollipop (T-Mobile US)
This thread contains multiple ways to get to T-Mobile's first Lollipop update, 20B. The 2nd post has a custom L build I made which has all the T-Mobile things removed (including wifi/lte calling).
20B TWRP-FLASHABLE ZIPS
LGD851.20B.SYSTEM-iNb4TMO.zip
MD5: 94c75957ae197ec45d0f562a2ae6768d
Stock 20B flashable system/rom... stock... exactly as T-Mobile intended it. Yes, TMO Wifi/LTE calling.
LGD851.20B.MODEM-iNb4TMO.zip
MD5: 62a5522cb71d1f8cc0bde9d0c48f6143
Stock untouched 20B flashable modem. Contains only the 20B modem.img.
LGD851.20B.BOOT-iNb4TMO.zip
MD5: 3d9fc3a5becd198b80c52c66ba0091a3
Stock repacked 20B flashable boot/kernel. Contains only the 20B boot.img.
LGD851.20B.BOOTLOADER-iNb4TMO.zip
MD5: 4f18399a8dbe006df3ad95709b3ed377
Stock flashable 20B boot stack. Contains 20B aboot, dbi, factory, laf, rpm, sbl1 and tz.
Directions:
Must be rooted. Use PurpleDrake or the new LG root floatin' around.
Be sure you are using TWRP v2.8.6 or higher. YMMV with other versions. DOWNLOAD TWRP HERE
Be sure all apps/data have been backed up (Helium/Titanium Backup) if you plan on restoring apps.
Be sure to have an EFS backup. If you don't.. you can make an EFS backup in TWRP or using the directions in my thread.
1. D/L n' flash 4 zips: 20B BOOTLOADER zip, SYSTEM zip, MODEM zip and BOOT zip.
2. Do a factory reset in TWRP (Wipe > swipe)
3. Done.. reboot TWRP into Lollipop. Be ready to wait up to 5min on first boot.
20B Stock Images
These are the untouched stock images from the official T-Mobile Lollipop 20B update for the LG G3 D851.
System.img only comes as a flashable zip.. easy install and saves space. Loose images can be flashed manually or packed in a zip.
Manual .IMG Installation
Code:
[SIZE="2"]dd if=/sdcard/[I]imagenamehere.img[/I] of=/dev/block/platform/msm_sdcc.1/by-name/[I]nameofpartitionhere[/I]
example:
dd if=/sdcard/[I]modem.img[/I] of=/dev/block/platform/msm_sdcc.1/by-name/[I]modem[/I]
*command assumes image is in root of internal storage.[/SIZE]
MD5 SUMS:
aboot.img MD5: 1be25ee4815ae48ef78b30bd53b1d8bf
boot.img MD5: cb84dd6e306797b38c8c71ec8a84726f
dbi.img MD5: 5410be69081b626dddcbae4a756f4a6e
factory.img MD5: def65ab1cc4c8a32f89e576f4c6a35b5
laf.img MD5: 90244c936e874d74dfe79249d9aacc88
modem.img MD5: 86bc66a4d35a1fcd815cb74b1d6771e2
recovery.img MD5: d0916f032e61c2549d2cbddd1b9f1b45
rpm.img MD5: 6f10a2a1e77d3a55e1d5d081a203c7c5
sbl1.img MD5: 0de2c07a37574732dacaac6f04c699cb
tz.img MD5: c3a3ff555a0a0de3bbbe37f07cb5e026
20B OTA UPDATE
D85110r_00-D85120b_00_update.zip
MD5: 204ca98458c4e2f14c35f6694f1f8b3d
This is the 10R -> 20B OTA update zip. Rather than waiting for it to push to your phone from T-Mobile.. you can manually install it as long as you are on STOCK 10R and have STOCK RECOVERY and are ROOTED. Other than root you must be 100% stock. If you deleted any stock apps that were in /system or installed xposed etc there is a very good chance you will not pass the updates system check before the update actually flashes. The update zip patches pre-existing files rather than adding full new files.. this helps keep the OTA zips file size down... and is also why ALL system files and your kernel/boot partition is checked before it flashes. The zip will FAIL if you have TWRP installed.
1. Download the OTA update zip from the D851 20B folder HERE
2. Copy the update zip into the cache folder (this is why you need root) then rename it: update.zip
3. Open Phone dialer > dial 3845#*851# > select WCDMA-Only -- DM/FOTA Test -- internal -- update
your phone will reboot then show: "Installing system update" with the lil green android guy. wait... done.
You will lose root after the update and be 100% stock again.
20B KDZ Method
T-Mobile D851 20B KDZ
To flash the KDZ manually read the thread HERE. Flashing KDZ will remove TWRP... you'd have to re-root then reinstall TWRP (if you even wanted it of course).
LG Mobile Support Tool
Download this Windows-based tool to update to 20B. This tool auto-downloads the KDZ and installs it for you. Install... run and follow the onscreen directions. If the app doesn't seem to start the upgrade try manually selecting: Options > Upgrade Recovery
@Chrishup has posted a rundown of how he updated using the Mobile Support Tool HERE.
Donate:
Donate HERE if you'd like to buy me a beer.. a pizza.. or help contribute to my LG G4 fund :good:
DOWNLOAD FROM CODEFIRE
Click to expand...
Click to collapse
Custom Rom
LGD851.20L-ollipop.I.UNICRON-iNb4TMO.zip
MD5: f1de51acffe17435c8172b4b0cd28cbc
This rom/kernel is not to be repacked or used as the "base" in your #yoloswag420 rom.
*This rom comes with a kernel so a boot.img or boot zip is NOT needed.
LGD851.20L-ollipop.I is a fusion of LG's 5.0 and 5.0.1, including some 20B bits. It has all things "T-Mobile" removed from the rom (except APN). If you don't need any T-Mobile features and want a minimal/debloated stock LG Lollipop experience this may be the rom for you.
LGD851.20L-ollipop.I's UNICRON build is most likely the final build for "v1". LGD851.20L-ollipop.II will start up when newer LG builds are available, most likely with Android 5.1.
Few Highlights:
Debloated
Stock LG Lollipop, no "tmo-ness"
Built-in PrimeTether
Rooted + Busybox
Updated Firmware
Ext-SD card Write Mod
Built-in kernel certified by savoca®
Supports @savoca's great mods:
on-the-fly screen sharpness on/off via Whetstone
display calibration with his KCAL Color Control app
Certified SAVOCA kernel is GPL-compliant
Whetstone - Download HERE
Color Control - Download HERE
KCAL/Color Control Videos - HERE and HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Directions:
Must be rooted. Use PurpleDrake or the new LG root floatin' around.
Be sure you are using TWRP v2.8.6 or higher. YMMV with other versions. DOWNLOAD TWRP HERE
Be sure all apps/data have been backed up (Helium/Titanium Backup) if you plan on restoring apps.
Be sure to have an EFS backup. If you don't.. you can make an EFS backup in TWRP or using the directions in my thread.
1. D/L n' flash 3 zips: 20B BOOTLOADER zip, UNICRON zip and MODEM zip.
2. Do a factory reset in TWRP (Wipe > swipe)
3. Done.. reboot TWRP into Lollipop. Be ready to wait up to 5min on first boot.
DOWNLOAD FROM CODEFIRE
Donate:
Donate HERE if you'd like to buy me a beer.. a pizza.. or help contribute to my LG G4 fund :good:
T-Mobile D851 20B Source
Look for L 20B under the LGD851TN section.
Chat
Don't forget you can chat amongst yourselves in the g3 IRC channel... HERE
Upgrade to Lollipop and can't download anything or write to internal sdcard? Fix yo permz. This doesn't fix extSD issues.
Code:
su
restorecon -FR /data/media/0/
Click to expand...
Click to collapse
nou
About time, Tmo!
Great guns.
Thanks Autoprime.
You are the King.
Awesome
---------- Post added at 07:03 AM ---------- Previous post was at 06:49 AM ----------
Op says everything you need to know.... READ BEFORE YOU FLASH!!!!
Awesome sauce!!!!!
What version of lollipop is this?
Flashed it.
Everything running great except for calls and data, as mentioned by @autoprime.
Thanks man for this exciting preview.
Waiting for a working Modem.
So excited for this. We just need that radio.
Root???? Justo flash supersu??
aleks_ said:
So excited for this. We just need that radio.
Click to expand...
Click to collapse
Once we get that radio, we will be all set.
@autoprime. As far as you know the official release doesn't lock the bootloader and downgrade is still available correct?
as soon as i see one with all the tmoness i will flash and use, would love to see one with the In-Flight and WiFi Texting working
so to install lollipop i have to flash this file? LGD851_20L-ollipop-iNb4TMO.zip
fr3d0x said:
so to install lollipop i have to flash this file? LGD851_20L-ollipop-iNb4TMO.zip
Click to expand...
Click to collapse
yes, but you will have spotty data and calls
techfreak243 said:
yes, but you will have spotty data and calls
Click to expand...
Click to collapse
i flashed but when im going to reboot theres no os
fr3d0x said:
i flashed but when im going to reboot theres no os[/QUO
Ignore that it boots just fine as long as you flashed the boot.img as well.
Click to expand...
Click to collapse
Jeff Zaugg said:
fr3d0x said:
i flashed but when im going to reboot theres no os[/QUO
Ignore that it boots just fine as long as you flashed the boot.img as well.
Click to expand...
Click to collapse
ok ill try agian
EDIT: It works
Click to expand...
Click to collapse
Can we use a modified modem from like Cm12? for service.
cammykool said:
Can we use a modified modem from like Cm12? for service.
Click to expand...
Click to collapse
Give it a shot and report back, maybe you'll be the one that finds a temporary solution! [emoji2]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
These are for the H815 variant only. Files are from software version 20B (Android 6.0 Marshmallow).
Included below: TWRP-flashable stock rom, boot, modem and bootloader zips. KDZ and individual images are also included.
*There is NO anti-rollback qfuse used in this update... you can downgrade using LGUP HERE. You can also use LGUP to flash the 20B KDZ.
Please do not mirror my files!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet...
Requirements:
You must have TWRP 2.8.7+ installed to use these files. Thanks to Dees_Troy as always for that. And, of course, you must have your bootloader unlocked for TWRP to work. Currently only H815 EU and (some) SEA variants have official unlock through LG's unlock page HERE. Please do not ask if "model x" is supported... did you unlock via LG's official unlock tool? Yes? then you can use it. No? then you can't... and you should just flash the KDZ instead.
If you have a locked bootloader and want to upgrade... just use LGUP and flash the KDZ. Don't risk it with FlashFire.
Install Directions:
These directions should be used by everyone who wants a rooted 20B system. Don't want root? Then it's probably easiest to just flash the stock KDZ... or just skip the supersu zip in the directions below.
1. Download the boot, modem, bootloader and system zips listed under the download section and place them on internal or external sdcard.
2. Also download the latest SuperSu zip from HERE [Thanks to Chainfire for his auto-patching boot.img version!]
3. (re)Boot into TWRP... don't wipe anything.
4. Backup current partitions: boot, system, data, efs
5. Install boot, bootloader, modem, system and supersu zips- ADD SUPERSU LAST! (Install > select zip > press "add more zips" > select next zip > repeat)
6. After all 5 zips finish flashing you can reboot! (if TWRP asks if you want to install SU, NO!!!)
Downloads:
LG-H81520B-Flashable.System.zip
100% stock untouched system. MD5 = 22edce52ca96e20f7a16a67d00934b4d
Mirror here.
LG-H81520B-Flashable.Modem.zip
This is a flashable stock 20B modem.
LG-H81520B-Flashable.Boot.zip
This is a flashable stock 20B boot.img. Boot.img contains kernel + dtb + ramdisk.
LG-H81520B-Flashable.Bootloader.zip
This is a flashable stock 20B bootloader. It contains aboot, factory, hyp, laf, pmic, raw_resources, rpm, sbl1, sdi, sec and tz. Do NOT wipe system before flashing this zip. Zip checks model before flashing.
Also, KDZ + all stock images for 20B are available here.
CODEFIRE DIRECTORY
Downgrade:
See the Downgrade section in my 20A thread HERE...
OR
Use LGUP HERE to flash a previous KDZ version.
Unofficial Bootloader Unlock:
Don't have official bootloader unlock? This guy claims to have a working method HERE...
#TEAMCODEFIRE
Click to expand...
Click to collapse
y u quote OP?
*reserved*
I may use this space to respond to some questions or add more notes as we go... rather than making new posts in the thread that get lost or go unnoticed.
FAQ
Q: My device shows the wrong software version in settings.. how do I fix this?
A: This is related to the "cust" (customer) partition on your phone. Using TWRP or a "Root Explorer" type app you can delete the current files in your Cust partition then you should have the proper version showing. I am not a fan of adding or flashing the cust partition... so I don't include updated cust partitions in the flashables. The cust folder/partition is in the root of your main directory.
Thanks Boss! U the man, as usual...
thanks @autoprime
I suggest you add a "NEW" on the title of the thread! because it seems the old thread! I had not noticed it at the beginning!
Thanks Auto!
Thanks mate!
Sent from my LG G4 using Tapatalk
Hi, anyone try Xposed with this version ?
can this modem be used on 20A based ROMS? - because my LTE reception with 20A is pretty weak, wants to slip back into HSPA mode in fringe areas where other phones have worked well.
.......
Enviado desde mi LG-H815 mediante Tapatalk
Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.
sudman said:
Hmm slightly odd in that when i go to setting-software info it says the software version is "7 HD 6.1 by S3VEN-234-15". Haven't used 7 HD for probably a month now and dirty flashed this from V20a. Odd, very odd.
Click to expand...
Click to collapse
delete cust folder..
S7VEN is everywhere
Sent from my LG-H815 using Tapatalk
First impressions?
Changelog from 20a?
Paolo83 said:
Changelog from 20a?
Click to expand...
Click to collapse
Please Read OP!
20B NOTES...
1. Knock code should be back.
2. Not sure what else has changed yet
I install with this method but that don`t change my software version i still have V10e-260-01, but android version is changed to 6.0.
?
Sweet! The KDZ is there
So for those of us with a locked booloader, no root etc, we can just flash / update to 20B via LGUP and retain all of our nothing fun (root and locked bootloader)?
Flashed fine H815P with LG UP.
Thanks,
VW
can't download the KDZ. tried 3 times, stopped at 67.5% everytime. how can i solve this problem?
victorwalter said:
Flashed fine H815P with LG UP.
Thanks,
VW
Click to expand...
Click to collapse
Can you give a feedback about battery and bugs? Thanks
hi everyone.
i was updated my g4 h815 to android 6.0 few days ago.
but now when i tried to root it no tuto worked with me.
i have unlocked my bootloader already officially.
can any one help me installing twrp recovery and root my g4 please.
DEVICE INFO
LG G4 H815.
Android Mashmallow 6.0 ( updated with LG BRIDGE )
M_Y4$$IN3 said:
hi everyone.
i was updated my g4 h815 to android 6.0 few days ago.
but now when i tried to root it no tuto worked with me.
i have unlocked my bootloader already officially.
can any one help me installing twrp recovery and root my g4 please.
DEVICE INFO
LG G4 H815.
Android Mashmallow 6.0 ( updated with LG BRIDGE )
Click to expand...
Click to collapse
Sure. You have to go back to 5.1 (there is no method to root 6.0 without TWRP yet). Just download the KDZ for your specific device (You have H815 EU?) and flash it via LGUP. You'll find how to do it in this thread.
If you're back on 5.1 root it using this method, flash TWRP afterwards (2.8.7.0 - You'll find a lot of threads how to flash TWRP, I personally flashed it with flashfire - very easy).
After TWRP and root installed properly go to this thread and follow the instructions - et voila: Rooted 6.0
At least that's one way that worked very well for me Good luck. Don't hesitate to ask questions, but, in fact, there should be everything you need in the threads I gave you. Cheers
EDIT: If you're on rooted and have TWRP Recovery installed + 6.0 (I personally don't know how to achieve that without doing it my way, then you can also use this article - It's actually the same like the autoprime thread)
maybe with the efortless method? injecting root into a MM rom and flashing it?
If your bootloader is unlocked like you said: Flashing TWRP via fastboot should be no problem (don't forget to enable usb-debugging in developer options). After you booted into it, flash SuperSU 2.52 (currently latest beta) and this is all you need normally. Also you can flash the modified kernel from here: http://forum.xda-developers.com/g4/development/kernel-t3232651, or a more modified kernel (same developer) from here: http://forum.xda-developers.com/g4/orig-development/kernel-t3213145
This should root your phone asap.
Follow_and_Feel said:
Sure. You have to go back to 5.1 (there is no method to root 6.0 without TWRP yet). Just download the KDZ for your specific device (You have H815 EU?) and flash it via LGUP. You'll find how to do it in this thread.
If you're back on 5.1 root it using this method, flash TWRP afterwards (2.8.7.0 - You'll find a lot of threads how to flash TWRP, I personally flashed it with flashfire - very easy).
After TWRP and root installed properly go to this thread and follow the instructions - et voila: Rooted 6.0
At least that's one way that worked very well for me Good luck. Don't hesitate to ask questions, but, in fact, there should be everything you need in the threads I gave you. Cheers
EDIT: If you're on rooted and have TWRP Recovery installed + 6.0 (I personally don't know how to achieve that without doing it my way, then you can also use this article - It's actually the same like the autoprime thread)
Click to expand...
Click to collapse
can you help find the kdz file for my device and how to flash it without flash tool because it always say to me " connection to server failed "
this is my device info can you give me the kdz for my phone please.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
darioampuy said:
maybe with the efortless method? injecting root into a MM rom and flashing it?
Click to expand...
Click to collapse
i don't know how to do it
+this mlust be twrp already installed to flash it i think
MickyFoley said:
If your bootloader is unlocked like you said: Flashing TWRP via fastboot should be no problem (don't forget to enable usb-debugging in developer options). After you booted into it, flash SuperSU 2.52 (currently latest beta) and this is all you need normally. Also you can flash the modified kernel from here: http://forum.xda-developers.com/g4/development/kernel-t3232651, or a more modified kernel (same developer) from here: http://forum.xda-developers.com/g4/orig-development/kernel-t3213145
This should root your phone asap.
Click to expand...
Click to collapse
i tried to install twrp and nothing happen no twrp installed and nothing changed in marshmallow.
You have to boot into TWRP via fastboot . Follow this guide here: http://forum.xda-developers.com/g4/general/unlock-bootloader-install-twrp-root-t3128241
M_Y4$$IN3 said:
can you help find the kdz file for my device and how to flash it without flash tool because it always say to me " connection to server failed "
this is my device info can you give me the kdz for my phone please.
Click to expand...
Click to collapse
go here to find kdz's for 5.1, you want v10c or v10d, then use LG UP to flash, make sure you have the USB drivers installed too, found here
reg66 said:
go here to find kdz's for 5.1, you want v10c or v10d, then use LG UP to flash, make sure you have the USB drivers installed too, found here
Click to expand...
Click to collapse
Thank you very much for you helpful advice.
but can you give me download link for LG UP please.
MickyFoley said:
You have to boot into TWRP via fastboot . Follow this guide here: http://forum.xda-developers.com/g4/general/unlock-bootloader-install-twrp-root-t3128241
Click to expand...
Click to collapse
i did it but stuck on boot loop after flashing super su 2.46
M_Y4$$IN3 said:
Thank you very much for you helpful advice.
but can you give me download link for LG UP please.
Click to expand...
Click to collapse
LG UP
Didn't I mention 2.52 BETA for SuperSU? *scratch* 2.46 is working on LP (5.x.x) but you need 2.52 for MM (6.x.x). Chainfire did this update mainly for it. 2.60 is also out, if you want: Link - Changelog: Link.
idk if you can downgrade from MM.
darioampuy said:
idk if you can downgrade from MM.
Click to expand...
Click to collapse
Yes, you can. I've done it as have many others, using LG UP