Which rom supports this app. I tried it on stock kitkat and it didn't work
https://play.google.com/store/apps/details?id=rubberbibpepper.WiFiTxPower&hl=en
I am having issues witth my wifi range on Lg optimous g pro e980 at&t. I am able to connect to wifi on Htc explorer while with optimos g pro on the same spot signal strength is too weak for optimous g pro to connect. This app can perhaps increase wifi tx power so I can get connected to wifi. If I take the mobile close to router wifi connects but it doesn't when its a little far and other mobiles are able to connect to it at that spot. Can it be a hardware problem? Please help..........
munirshah77 said:
Which rom supports this app. I tried it on stock kitkat and it didn't work
https://play.google.com/store/apps/details?id=rubberbibpepper.WiFiTxPower&hl=en
I am having issues witth my wifi range on Lg optimous g pro e980 at&t. I am able to connect to wifi on Htc explorer while with optimos g pro on the same spot signal strength is too weak for optimous g pro to connect. This app can perhaps increase wifi tx power so I can get connected to wifi. If I take the mobile close to router wifi connects but it doesn't when its a little far and other mobiles are able to connect to it at that spot. Can it be a hardware problem? Please help..........
Click to expand...
Click to collapse
That one was last updated like 3 years ago: eek!
Maybe something in the *#*#4636#*#* menu could help figure out the problem?
Try disabling Bluetooth since it runs on the same frequencies. Also try changing the channel on your router to something in less use.
Might not hurt to put Tomato or DD-WRT on your router and up it's TX power. I imagine that app you found is just snake oil.
Related
I'm really satisfied about defy's performances but there's something i can't figure out with WiFi connection. I'm currently using a netgear wireless-N router which works flawlessy with all the other devices, my defy instead is not able to stay connected for more than 10 seconds, keeping disconnecting and re-connecting to the router, continuosly. No way to use the browser or the market under Wi-Fi.
I'm also on a motorola's forum, there i found other people who experienced the same issue. Some of them say the problem is related to wireless-N routers and yes, it looks like defy works better with wireless-G routers (tested).
Btw, no problem with the 3G.
I was wondering if some of you, here in xda, got trouble with defy's WiFi.
FWIW, I use my defy with my linksys wrt54gl router with no issues whatsoever, so it very well may be the wireless n being the issue.
I'm using an access point (netgear) with wireless N and i'm connected to Wifi all the time. I've had this mobile for a week so i haven't noticed myself getting disconnected on skype...but it works fine with N
I see a wifi issue with my fritz.box as well. wifi is (and stays) connected, but no data is going through. I've found various tips like using static ip or using different channels, but in the end they didn't work for me.
so I rooted the defy and modified the tiwlan.ini where ht_enable was set from 1 to 0, which actually disables N, but gives me a reliable connection instead.
hth
thanks for your replies.
@trosenda
Most of the times it keep disconnecting but sometimes it stays connected but there's no flow of data, that is what happened to you.
I will try your method, disabling N (ht_enable set to 0) probably forces defy to go through G only.
thanks
I have a netgear wifi g and I have some trouble with defy which keep on disconnecting so I can't use the browser or the market...It's not related with wifi n because my router is only g but the problems are there...If you found a solution can you post a step by step explanation?
Solved I figured out defy don't like wifi n routers and protected ones. With a router that broadcasts on g channels with no protection (btw only mac adress control access) the defy works like a charm...hope this help others
kibiwi said:
Solved I figured out defy don't like wifi n routers and protected ones. With a router that broadcasts on g channels with no protection (btw only mac adress control access) the defy works like a charm...hope this help others
Click to expand...
Click to collapse
Thanks.
Yes the problem is exactly what you said - defy doesn't like too much w-N and secured routers. Not all the people have this issue, however, it has been reported to Motorola through their forum. Let's wait for their answer, hopefully there could be a kind of fix.
I was having the same issue with my Belkin N (secured) in my house. But in two other buildings I have G routers w/o issues. So, I figured, just swap the N for a G, right? No. As soon as I tried either of the G routers in the house, same problem as with the N. So I put the Belkin back in the house and spent some time adjusting its three external antennae. Bingo! I now have as solid a connection with the N as with my two other G routers. Must have been interference. Phones? Applianaces? Sonos? BTW the only other thing I had with the same trouble was my PS3. Now, it's connected perfectly as well. Interference.
I'm online through my Linksys 610n router, haven't skipped a beat since I got the phone...
kibiwi said:
Solved I figured out defy don't like wifi n routers and protected ones. With a router that broadcasts on g channels with no protection (btw only mac adress control access) the defy works like a charm...hope this help others
Click to expand...
Click to collapse
Hey guys, just wanted to let you know that turning of the n-standard on my router, going to b/g mixed (from b/g/n) worked great, no more disconnections. Before, is disconnected like all 20 seconds or so.
What worked for me:
My router is a netgear dgn1000 (a/b/g/n), i had WiFi issues for long time, i tried with the G mode only, tried all the possible configurations (both on phone and router), but nothing to do, disconnections every 10 seconds still going on.
Finally i got it working by following these three steps:
1) Update the router firmware (my router was updated to 1.1.00.41)
Then from your dgn1000 configuration page - 192.168.0.1 -
2) Go to "Wireless settings", switch to G mode
3) Go to "LAN Setup" and assign an address reservation to your defy (e.g. 192.168.0.5)
Note: I tried 2) and 3) before the firmware was updated, no success. So, if you have a dgn1000, first of all update the firmware.
Hope this can help
I don't lise connection but the signal is very weak with Wifi. 3g réception is inside on the other hand
Sent from my MB525 using XDA App
xdaid said:
What worked for me:
My router is a netgear dgn1000 (a/b/g/n), i had WiFi issues for long time, i tried with the G mode only, tried all the possible configurations (both on phone and router), but nothing to do, disconnections every 10 seconds still going on.
Finally i got it working by following these three steps:
1) Update the router firmware (my router was updated to 1.1.00.41)
Then from your dgn1000 configuration page - 192.168.0.1 -
2) Go to "Wireless settings", switch to G mode
3) Go to "LAN Setup" and assign an address reservation to your defy (e.g. 192.168.0.5)
Note: I tried 2) and 3) before the firmware was updated, no success. So, if you have a dgn1000, first of all update the firmware.
Hope this can help
Click to expand...
Click to collapse
I had the DGN1000 with firmware 1.1.00.35 and my Milestone 2 was connecting very well. Now, I have a DGN1000 with the 1.1.00.28 and my Milestone 2 doesn't connect at all: every 10 secs the connection is re-established with a new dhcp request.
Do you think I ONLY have to change my firmware? Or I have to change also the address reservation?
hi,
why my DEFY wifi N only connect at 65mbit ???? why not 150mbit???
who knows something about it ???
Hmmmm don't know what to say I gotta netgear dng 2000 have no problem with connection just that the router was a lil weak. Fixed that with antenna replacements. Defy has the 2.2.2 Nordic deblur
Sent from my MB525 using XDA App
i am using TL-WR1043ND and its disconecting about once in minute
changed to wifi B/G nothing helps
FLS-BR how you maneged to get defy with 16GB is it froms SD card
So I'm on official cm 10.2 and I have a problem where if I connect to a Bluetooth device my WiFi goes to crap. I've done a full nights research on this problem and apparently its pretty common post android 4.2. The only fix I have read about that seems to work for people is to get a duel band router and run 5GHz WiFi. So before I go buy yet another router to try to solve this problem I would like to know if any of you have run into this problem as well, or do not have it at all, or any fix other than the 5 GHz router? Is stock ROM having this problem as well? PA?
Thanks in advance
Your Bluetooth must be on and connected and in some cases you have to run speed test.net to see it get slow but mine simply loses signal after I try to surf. Or gets so slow as to be unusable. I'm streaming audio to a Bluetooth headset.
Most devices behave this way because bluetooth is also on 2.4ghz as well. A modern inverter style microwave oven in the kitchen can also FUBAR WiFi too because they also operate in this band. If you are that heavy of a user 5ghz would probably help...though keep in mind 5ghz doesn't travel as far.
Sent from my Nexus 7 using Tapatalk 4
I have the same problem with Nexus 7 android 4.3 but not with my LG optimus L9 android 4.2.2 phone. Wifi and Bluetooth both works fine with the phone but not with Nezus 7
Update: I solved my problem by buying a 2.4Ghz / 5Ghz dual band router.
I'm having an issue where my WiFi connection drops. Tab still says connected but I get no throughput. All other wireless devices still work. I have to toggle the wifi on the tab on and off to reconnect. Router is an actiontec C1000A.
I've read other threads where people had similar issues and exchanged tablets for new ones only to have them do the same. Router is good, it works with all my other devices without issue. What good is a WiFi only tablet if the WiFi sucks eggs?
squabeggz said:
I'm having an issue where my WiFi connection drops. Tab still says connected but I get no throughput. All other wireless devices still work. I have to toggle the wifi on the tab on and off to reconnect. Router is an actiontec C1000A.
I've read other threads where people had similar issues and exchanged tablets for new ones only to have them do the same. Router is good, it works with all my other devices without issue. What good is a WiFi only tablet if the WiFi sucks eggs?
Click to expand...
Click to collapse
Well my wifi has been brilliant, the only issue I had was that although my wifi router was working with every other device and even my Note 10.1 it didnt want to play youtube videos on it. So I changed connection to my other broadband and it worked a treat so even though your router works with other devices it doesn't mean the tablet is faulty just that the router and tablet don't like each other.
Best way to try this is go to a friends house and try their connection or go to a coffee shop where they have free wifi and hopefully you will see wifi doesn't suck eggs lol. Anyways hope your problem gets sorted.
squabeggz said:
I'm having an issue where my WiFi connection drops. Tab still says connected but I get no throughput. All other wireless devices still work. I have to toggle the wifi on the tab on and off to reconnect. Router is an actiontec C1000A.
I've read other threads where people had similar issues and exchanged tablets for new ones only to have them do the same. Router is good, it works with all my other devices without issue. What good is a WiFi only tablet if the WiFi sucks eggs?
Click to expand...
Click to collapse
Are you just complaining or are you asking for help?............ If your asking for help please tell us if you are using 2.5 or 5ghz, b, g, n, ac, channel #. Many things can cause wifi issues and sometime a monitoring app from the play store like "Wifi analyzer" can help narrow down whats really going on.
Im asking for help by complaining. I'll get some more detailed info on my network and post it up later.
My modem/router was set to auto detect... I used wifi analyzer to set it to a less crowded fixed channel. I also turned off 802.11n. It had b, g and n simultaneously... Now it's just b and g. So that's 2.4 GHz? I don't have super Internet, so no real need for "n". I'll report back after I see if this changes anything. The security is WPA2-Personal...don't know if that has any effect. Any other ideas are appreciated.
So my WiFi is really slow but with a wired connection its fast. Is there some way I could connect to my router my lg g3 to take advantage of the speed or maybe to the computer.
YourWorstFears said:
So my WiFi is really slow but with a wired connection its fast. Is there some way I could connect to my router my lg g3 to take advantage of the speed or maybe to the computer.
Click to expand...
Click to collapse
So you want to create land line of mobile phone?
I guess,its sounds stupid but I need fast internet to download some things.
Better repair wifi because its something wrong with wifi if its slow, but wired internet is fast.
Hi!!
I just bought a new tab s4, and I can not connect it to the 5ghz wifi network. It connects, but says connected without internet. The 2.4GHz network connects perfectly.
PS. Sorry for my English.
Same issue.
My tablet is TIM branded.
Same issue, it connects on 2.4ghz but not on 5ghz...
Anyone?
HI peep's mine is connected to 5 GHz and it’s working flawlessly, it’s showing a connected speed of 866MBPS!
Quick questions, did you try a reboot router and Tab S4 once connected to 5GHZ ?
Also are you using separate WPA2 PSK key ?
As some routers can’t handle separate keys, keep the Wi-Fi key same for both channels i.e 2.4GHZ and 5GHZ!
Does it get ip address from the router/dhcp server you have?
I don't have access to a 5Ghz wifi right now. Next week I'll try the tablet and I'll try everything you said. If the new tablet has the same problem of course, I hope it goes well.
speed_boy said:
Does it get ip address from the router/dhcp server you have?
Click to expand...
Click to collapse
See below and bands i have Separate bands!
Galaxy-Tab-S4
dual stack
Galaxy-Tab-S4
device info type 5 GHz
IP address: 000.000.0000 (DHCP)
MAC address: 77:EE:00:FFD:00
I have the same problem and I noticed that it came with the Anroid Pie update! 2,4G is working fine in my S4.
I have another tablet Samsung Galaxy Note 10.1 2014 edition and 5G Wifi is working flawlessly.
Might it be software issue in Android 9?
My basebandversion is T835XXU3BSF4, kernel 4.4.153-16124683 #2 Fri Jun 14 2019.
My Tab S4 was ,finally, updated to Android 9. 5GHz working fine. Both 5GHz and 2.4GHz working fine...
All good here...
I got one coming in the mail and will report back on my success but if you don't get internet trying setting your dns manually to Google's public one for testing. 8.8.8.8 Could also be related to the channel the router is using for 5ghz.
Malcolm
Okay, so I got a new tab s4, and I have the same problem. At the second floor of my house, I don't connect to the 5Ghz wifi. I have separated bands. I tried changing the channel... I don't know what else try.
InsertCoin_Pls said:
Okay, so I got a new tab s4, and I have the same problem. At the second floor of my house, I don't connect to the 5Ghz wifi. I have separated bands. I tried changing the channel... I don't know what else try.
Click to expand...
Click to collapse
5GHz WiFi has less range than 2.4GHz, maybe the signal strength is not enough at the second level. Use the lowest frequency band available, move the base unit to a place less obstructed etc. This does not sound like a device issue.
1eStar said:
5GHz WiFi has less range than 2.4GHz, maybe the signal strength is not enough at the second level. Use the lowest frequency band available, move the base unit to a place less obstructed etc. This does not sound like a device issue.
Click to expand...
Click to collapse
Yeah, I know, the device issue is that all my other phones, computers and devices are able to connect to the wifi. I enabled the smart wifi and it looks like it's going better, the tablet is able to get better download speed.