Develop Bugs

Hardware ID Missing after rooting......

Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?

Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..

I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?

don't use windows..

Ditto
dstenc said:
I have the same problem.
Changing ports and restarting in most cases didn't help and only in few cases I managed to access files on the phone via USB.
Any other suggestion how to solve this?
Click to expand...
Click to collapse
glen4cindy said:
Hello.
I used the Toolkit to root my Note 2, and I had to use option 4 on the rooting menu, Install Custom Recovery, Install via Recovery to get it to work. I tried several times via the Odin tool and Twrp recovery, and the phone kept booting into Android Recovery instead of Twrp recovery.
I finally used Odin to flash back to stock ROM that I got here, but, along the way, even though the Toolkit was able to connect to my Note 2, I get the Hardware ID missing, and I cannot connect to it any longer like I could after I installed the initial drivers.
Anything I can do and stay rooted?
Click to expand...
Click to collapse
I was able to gain root back using the toolkit. I flashed stock rom image I believe the ROM from the factory then flashed back stock recovery. Went back in after I updated and re-rooted to flash the triangle away. Now I need to unroot and after speaking with Sprint Rep on phone and trying a few things they advised me to take it to store to let them try it. I believe ALL of my problems started when I tried to use Mobile Odin Pro to flash the latest update to LJC (should I have been on stock recovery?). It started to flash then stopped and went into CWM recovery which is the recovery that the toolkit flashed. I for some strange reason was going to flash the update from there except I didn't have it in the right place on my sd card (couldn't access it GOD I'm a Dumbass!). God help me cause I'm too stupid to even understand what side loading is let alone how to do it. If some kind soul would take pity on me and pm me I could get a handle on the differences between HTC and Samsung. Anyway need to unroot now. Oh I keep seeing in the flash counter saying 1 but I'm on stock rom with stock kernel and stock recovery how do I get it to zero. Using triangle away. Anyway to check counter with stock recovery?
OH yeah does anyone keep getting "Internal Error Code 1500" in addition to the hardware id is missing?
Thanks to everyone that takes time to help idiots like me. I promise I CAN learn.
Charles

chrisc627 said:
Change usb ports or restart your device. Mine did it last night and I fixed it by doing both..
Click to expand...
Click to collapse
Thank you...Unlike user: dstenc, the above procedure fixed my issue. As has been the case many times, XDA helpful users to the rescue!
:laugh: :good:

Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.

Could you walk me through your fix?
dstenc said:
Just to report that for now I've found woraround. I've installed old drivers 1.4.103.0 and now both Kies and file access works.
Still looking for final solution with latest drivers.
Click to expand...
Click to collapse
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles

Could you walk me through your fix?
Mods please delete double post sorry

ceabbott2 said:
Hi dstenc,
Would you be so kind as too help me do what you did? I don't have kies on my pc, did you get the old drivers from the s3 forum? I would love to give it a shot.
Thanks for any help
Charles
Click to expand...
Click to collapse
I don't remember link. I googled so you might try that way.
Just FYI, even with older drivers I have sporadic Hardware ID Missing error, but far too less than with the latest version.

I'm posting this to keep it to the top of this board.
This is my second Note 2 in 2 weeks. I returned the first one because it stated Hardware ID missing, so within my first 2 weeks Sprint gave me a new one thinking that it was my phone. While at the Sprint store, and not yet rooted, we installed the unit and removed the unit 15 times to see if we could get it to have the Missing Hardware ID to pop up, it DIDN'T pop up once, so I thought I was good to go.
I came home and did the common root method that uses Galaxy Note 2 Toolbox. I IMMEDIATELY started getting the Missing Hardware ID again.
So now that we have it localized, what could be missing or creating a problem from the root procedure from the Galaxy Note Toolbox 2???
What I find really strange is that many are not experiencing this problem or they are just living with it.
I even tried the USB Switcher that appeared to install and does switch between Mass Storage and MTP, but although my PC makes the upward noise that sounds like it is installing and recognizing the USB Mass Storage, it doesn't end up recognizing it. It was ZATTA's build but he said it didn't work for his Galaxy 3 or Note 2 either.
Will anyone find a cure????
This will be no fun to have to deal with for the next 2 years.
Chime in PLEASE!!!!!! Even if it's only to insult me, I don't care if you have a cure.
Regards
Dave

if you do Google search, it's a known issue. From what I read, it's a driver issue. Some have had luck using the older Samsung USB drivers. You have downloand them, and install, and have your PC completely disconnected from the internet before plugging in your GN2 after the install. Appaarently the drivers on Microsoft's servers are bad; may be the wrong device.
I've done this, and still have the issue. I just find I don't have plug and unplug the USB cable as much.
What I have seen, the PC does connect to the GN2. It just doesn't recognize it as a storage device. It wants to use it as a modem, probably from the tethering capabilities with a USB OTG cable.
It may not be so much that it's not wide spread, but more that not everyone uses the GN2 as storage device or connects it their PC.

I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.

knightfox said:
I dont think this is all due to Windows issue. This is what i notice before and after root.
If you have restore to Original Stock ROM, you will notice that your device doesnt encounter this issue.
If you have rooted your device Custom ROM or Flash CMW (this resulted as Binary Counter increased), you would have Hardware Missing Id issue. Somehow the MTP is not working.
If you have Flash your device with a pre rooted stock rom, there is no issue at all until you flash CMW where flashing increase counter.
How i notice this, i have root/unroot my device like 20 times since i got my device.
The issue is here is more of where Binary Counter Increase, in Windows 7 you would face Hardware ID Missing issue. Restart and connect to other USB port will not work.
Some how we need to no let the Binary Counter changed and Triangle Away is only useful if you want to return you device to original state.
Click to expand...
Click to collapse
Yep I think you may be on to something. Because when I rooted I tried both TWRP and CWM and then I had to go back to stock to get to apply the LJC update. Ever since I have had the chameleon error and Handsfree activation issues. Oh my counter always says 1 and I can't remove it with triangle away. I think it says custom binary yes and the counter says 1. I am using a laptop with Windows 7 and it now recognizes the device just can't stop the errors on start up.
Charles
Sent from my SPH-L900 using xda premium

Samsungs older drivers: uploaded.net/file/hdh0f1xd

[Q] (AT&T SGH-I747) Firmware Upgrade Encountered an Issue....After Wipe

Hello! I was planning to sell my S3 because I got an S4. So after wiping the memory of the S3, it rebooted but it froze while starting up. So I held down the power button for a few seconds to restart it hoping it would work fine. But when it turned on, it immediately went to a screen that said "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I can't go into Recovery mode on the phone, all I can go into is download mode. I tried to do a Emergency Firmware Recovery using Kies, but it didn't work. It either stayed at zero percent after downloading what was needed to update or it worked fine for a while until it showed up some error (I hate Kies with a passion). So I have no idea on what else to do. If I can't figure it out, I was just gonna sell it at a kiosk at the mall and just get whatever money I could get. **OH and my S3 is not or has ever been rooted.**
Please help! Thanks!
EDIT: My android version is stock TouchWiz 4.3 by the way!

Hello! I was planning to sell my S3 because I got an S4. So after wiping the memory of the S3, it rebooted but it froze while starting up. So I held down the power button for a few seconds to restart it hoping it would work fine. But when it turned on, it immediately went to a screen that said "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." I can't go into Recovery mode on the phone, all I can go into is download mode. I tried to do a Emergency Firmware Recovery using Kies, but it didn't work. It either stayed at zero percent after downloading what was needed to update or it worked fine for a while until it showed up some error (I hate Kies with a passion). So I have no idea on what else to do. If I can't figure it out, I was just gonna sell it at a kiosk at the mall and just get whatever money I could get. **OH and my S3 is not or has ever been rooted.**
Please help! Thanks!
EDIT: My android version is stock TouchWiz 4.3 by the way!
Click to expand...
Click to collapse
I could be off base a bit but I think you have a few options, standard disclaimer applies here if you Bork your phone worse than it is now by any thing typed below it is your fault not mine, I give fair warning of risks involved.
A) go to best buy have them flash whatever they can (this is the latest tech support info from samsung) perhaps they can fix it and you will still be official with warranty bit 0 in Grey letters,
there is very little risk involved with this option you might get into a car accident on the way to and from best buy.
B) intentionally hard brick your phone, use the SD card Debrick method, flash custom recovery such as twrp or cwm, flash a rom, bootloaders, modem and kernel. This method is not very safe, not 100% guaranteed to work nor recommended for an average user. There are significant risk involved and it will show warranty bit 1 in red letters when in download mode and it will also display flash count and custom instead of official this will also disable knox, root the phone and maybe other things I forgot about.
There is alot of risk involved here proceed with caution.
C) send/take the phone to a jtag service spend about $50 and the phone will still be official with warranty bit 0 with knox intact. There is a possibility that the phone cannot be recovered using this method so there is a low risk involved.
I recommend you use option A) go to best buy and let them try to work their smoke and mirrors. Then if that doesn't work try option B) because why not try to recover it yourself for free at home to save some money over option C) and if you are considering option C) they should be able to recover the phone so that removes most of the risk of option B) .
GOOD LUCK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:26 PM ---------- Previous post was at 02:20 PM ----------
Btw you should try to sell it on www.swappa.com it is a great place to sell phones and it is endorsed by xda as our official market place to buy and sell, you can get between $200 and $350 on there depending on condition and buyers.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

theramsey3 said:
I could be off base a bit but I think you have a few options, standard disclaimer applies here if you Bork your phone worse than it is now by any thing typed below it is your fault not mine, I give fair warning of risks involved.
A) go to best buy have them flash whatever they can (this is the latest tech support info from samsung) perhaps they can fix it and you will still be official with warranty bit 0 in Grey letters,
there is very little risk involved with this option you might get into a car accident on the way to and from best buy.
B) intentionally hard brick your phone, use the SD card Debrick method, flash custom recovery such as twrp or cwm, flash a rom, bootloaders, modem and kernel. This method is not very safe, not 100% guaranteed to work nor recommended for an average user. There are significant risk involved and it will show warranty bit 1 in red letters when in download mode and it will also display flash count and custom instead of official this will also disable knox, root the phone and maybe other things I forgot about.
There is alot of risk involved here proceed with caution.
C) send/take the phone to a jtag service spend about $50 and the phone will still be official with warranty bit 0 with knox intact. There is a possibility that the phone cannot be recovered using this method so there is a low risk involved.
I recommend you use option A) go to best buy and let them try to work their smoke and mirrors. Then if that doesn't work try option B) because why not try to recover it yourself for free at home to save some money over option C) and if you are considering option C) they should be able to recover the phone so that removes most of the risk of option B) .
GOOD LUCK
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
---------- Post added at 02:26 PM ---------- Previous post was at 02:20 PM ----------
Btw you should try to sell it on swappa it is a great place to sell phones and it is endorsed by xda as our official market place to buy and sell, you can get between $200 and $350 on there depending on condition and buyers.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the quick reply! I'm going to Best Buy either later or tomorrow to see what they can do. I called and they said they may be able to help. Oh and thanks for the website too! It sells for way more than I was offered! :good:

OK, so I got the chance to go to Best Buy yesterday and they wiped and put the software back on my phone. Works great! Thanks for the help!

RDup98 said:
OK, so I got the chance to go to Best Buy yesterday and they wiped and put the software back on my phone. Works great! Thanks for the help!
Click to expand...
Click to collapse
Does Bestbuy charge for that service? I'm on ATT GS3 4.3 but for some reason cannot get rid of the Super Su app and I want to be unrooted. It keeps telling me that uninstall failed. I don't care about warranty because mine no longer has one. I tried to go to a lower stock rom or even just installing the upgrade but it won't work. Thanks
In odin mode it tells me the following:
Custom Binary Download= No
Current firmware = Official
Warranty Bit =0
SW Rev Check Fail: Fuse 2 > Binary 0

Kimo49 said:
Does Bestbuy charge for that service? I'm on ATT GS3 4.3 but for some reason cannot get rid of the Super Su app and I want to be unrooted. It keeps telling me that uninstall failed. I don't care about warranty because mine no longer has one. I tried to go to a lower stock rom or even just installing the upgrade but it won't work. Thanks
In odin mode it tells me the following:
Custom Binary Download= No
Current firmware = Official
Warranty Bit =0
SW Rev Check Fail: Fuse 2 > Binary 0
Click to expand...
Click to collapse
Nope, it was free and it only took about 15 minutes. :good:

You say in the OP that you can get into download mode. When KIES says to do a recovery all it requires is download mode and not recovery mode.
If you can get to download mode, you should be able to do what kies calls an emergency recovery. It would take you to 4.1.1 then you could OTA up to 4.3. And no, this won't downgrade the bootloader. Kies will only downgrade the rom firmware. Find the emergecy recovery options in one of the menus in KIES.
edit. opps sorry, just saw that this didn't work for you.
What version of KIES are you using? there's KIES and then there's KIES 3. try whichever one you're not using, i suppose.

jack man said:
You say in the OP that you can get into download mode. When KIES says to do a recovery all it requires is download mode and not recovery mode.
If you can get to download mode, you should be able to do what kies calls an emergency recovery. It would take you to 4.1.1 then you could OTA up to 4.3. And no, this won't downgrade the bootloader. Kies will only downgrade the rom firmware. Find the emergecy recovery options in one of the menus in KIES.
edit. opps sorry, just saw that this didn't work for you.
What version of KIES are you using? there's KIES and then there's KIES 3. try whichever one you're not using, i suppose.
Click to expand...
Click to collapse
I tried the newest versions of both Kies and Kies 3 but it still didn't work. But I like I said earlier, I took it to Best Buy and they fixed it so it's all good.

[Q] cant flash 4.1.2 after botched 4.3 ROM attempt?

I wasn't paying attention to the model numbers I was looking at and tried to install an N7100 ROM on my SGH-T889. I installed it, fudged my IMEI and tried to rollback to the previous ROM I had in place but it didn't resolve my IMEI unknown issue. I tried to restore my backups, nothing. I have tried multiple stock firmware versions for my phone I have found on here but ODIN fails on every single one, most of them sitting at boot.img, MD5 hash invalid or getting stuck on system. I am unable to get into recovery, only the download screen. I think because the ROM I tried was 4.3 it messed up my bootloader and wont let me go back to 4.1.2 but I cant put anything on it at this point. Ive tried multiple versions of ODIN, different USB ports, cables, rebooted my PC and Im out of ideas at this point. I apologize in advance because I'm sure the answer is out there I just cant find it and I've been looking for a few days.

D3ADM4N said:
I wasn't paying attention to the model numbers I was looking at and tried to install an N7100 ROM on my SGH-T889. I installed it, fudged my IMEI and tried to rollback to the previous ROM I had in place but it didn't resolve my IMEI unknown issue. I tried to restore my backups, nothing. I have tried multiple stock firmware versions for my phone I have found on here but ODIN fails on every single one, most of them sitting at boot.img, MD5 hash invalid or getting stuck on system. I am unable to get into recovery, only the download screen. I think because the ROM I tried was 4.3 it messed up my bootloader and wont let me go back to 4.1.2 but I cant put anything on it at this point. Ive tried multiple versions of ODIN, different USB ports, cables, rebooted my PC and Im out of ideas at this point. I apologize in advance because I'm sure the answer is out there I just cant find it and I've been looking for a few days.
Click to expand...
Click to collapse
Its possible that when you tried to flash 4,3 rom you also ended up with the stupid KNOX security thing. Which means you cant go back to older roms only 4.3. (as far as i know, im still a bit of a noob with this stuff)
It might be usefull to post what you get on the screen when in download mode, hat will give people more info to help you with i guess.
I did a similar thing too you a while ago and lose my imei and such, i cant exactly remember how i fixed it, i think i just flashed a stock from from sammobile.
If you havent tried that, then go here http://forum.xda-developers.com/showthread.php?t=2032849

Did you try flashing stock 4.3 ROM for SGH-T889 from sammobile ?
Try flashing the MK7 modem ? You can find it under development forums.
Sent from my SGH-T889 using xda app-developers app

nollington said:
Its possible that when you tried to flash 4,3 rom you also ended up with the stupid KNOX security thing. Which means you cant go back to older roms only 4.3. (as far as i know, im still a bit of a noob with this stuff)
It might be usefull to post what you get on the screen when in download mode, hat will give people more info to help you with i guess.
I did a similar thing too you a while ago and lose my imei and such, i cant exactly remember how i fixed it, i think i just flashed a stock from from sammobile.
If you havent tried that, then go here http://forum.xda-developers.com/showthread.php?t=2032849
Click to expand...
Click to collapse
Thanks for your reply. I forgot to mention in my post what I have on the download screen currently:
CUSTOM BINARY DOWNLOAD: YES (1 COUNT)
CURRENT BINARY : SAMSUNG OFFICIAL
SYSTEM STATUS: CUSTOM
KNOX WARRANTY VOID: 1
AP SWREV: A2
I have tried a 4.3 stock ROM, to no avail. I will try it again now though.

ciphercodes said:
Did you try flashing stock 4.3 ROM for SGH-T889 from sammobile ?
Try flashing the MK7 modem ? You can find it under development forums.
Sent from my SGH-T889 using xda app-developers app
Click to expand...
Click to collapse
I did indeed, although The modem I tried now that I am looking back through my downloads I believe was for the N7000 model. I will look through it and try to find it. Thanks for your reply.

I seem to have gotten myself out of the hole Ive dug. Hopefully if anyone else gets this deep, this will help. Given the fact that I erroneously flashed a 4.3 ROM I screwed myself over for going back but I was able to flash the latest firmware from sammobile (4.3) The file should be named T889UVUCMK7_T889TMBCMK7_TMB. I unzipped it, reinstalled ODIN 3.09 and tried a few times with negative results. However, Ive seen several conflicting posts about Kies, some say delete it completely, some say use it so I reinstalled it BUT I ended the process in task manager before I connected my phone and opened ODIN. I flashed only the firmware in the PDA section, no .pit files, no .phone files. It completed after about 10 minutes and I now have a stock 4.3 note 2, wifi capable and data service enabled. My download screen still shows custom binary download8 counts) which I know I can revert using triangle away but current binary and system status both show samsung official. The Knox warranty void still shows:1. Tmobile has sent me a replacement due to my negligence and ignorance in reaching out to them and I have 2 phones, the one I just fixed and the warrantied replacement on 4.1.2 sitting next to it. Should I just return the replacement back to them and tell them I fixed my issue or should I send them the old phone and keep the refurb? Im not familiar with the procedures phone companies follow when it comes to inspecting phones that are sent back to them but it seems to me that it is an expensive gamble because if they get my old one and see the Knox tripped, I imagine they would claim its out of warranty and charge me some astronomical amount.

[Q] SM-T217s - my first ever brick.

Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.

joshuaerda said:
Hi friends. Long time lurker here.
I've had many Samsung phones and many other android devices, but this is my first brick.
I had flashed the rooted SM-T217s rom, and the wifi wasn't working, so I tried to reflash it, at which point everything went wonky. I searched the forums and found some threads on bricked 217s's, but nothing specific to my situation.
The tablet went to the emergency firmware update screen, and I haven't been able to get Kies to even recognize it. I try to Odin back to the latest stock (B8) but it fails at 'Get PIT for mapping.' My google-fu tells me this is not a good thing.
Am I hosed here? What else can I try?
Thanks XDA, you're my only hope.
Click to expand...
Click to collapse
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.

joshuaerda said:
Good news, I guess. I was able to flash TWRP recovery and the stock rooted rom from another computer, but now Wifi is borked and there's no network connection. HALP.
Click to expand...
Click to collapse
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.

254336992952
​
joshuaerda said:
Okay well I fixed it.
Turns out, the problem was that I was using Odin on a VM on my Mac. I had tried to use a PC, but I think the USB controller was too old, so that failed too. I had to use Heimdall to flash each of the partitions from the B8 zip manually. It worked, and I'm back in business, though not rooted. I suppose I'll wait until there's a better way to root before I try it again.
Click to expand...
Click to collapse
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.

IAMRUDYT said:
​
You should have made a backup. I used twrp recovery flashed a rom same thing wifi wouldnt work so I restored back. If you get it working again make a backup imo. Goodluck.
Click to expand...
Click to collapse
same here, I have the rom, but hesitated on the firmware, waiting to see if someone gets the wifi working, not to many developers here for this tablet.

sm t217s
Ok guys. Heres my deal with this TAB. Ive rooted... Unrooted. wipe wipe wipe wippty wipe . WiFi not working. Fixed it with NB8. So here now I sit with:
----NB8 Wifi works---
----TWRP-----
Yup, pathetic i know. I cant even get the supersu to flash. TWRP wont move it over to flash off external sd card. Im not hip to abd plus i heard you leave yourself wide opento visitors when using that.
Ive eye hustled a thread on here that some friends are getting back together to rock it on a custom rom so my fingers are crossed. This tab is so neglected i mayjust go get the 210r. But i really dont want to. So my question is....
Can someone please give me links to files that work with the NB8 stock firmware. Some of the links are outdated after sprint uploaded the new bootloader. We are a small community on this tab so lets stick together on this. I dont think cynogen isgoing to do anything for it. As they concentrate on thier new phone which looks pretty sweet by the way. K im done. Going to wait for help and play with this htc one s
thats been collecting dust.

Rooted
Sent from my SM-T217S using XDA Premium 4 mobile app

Note 7 SM-N930F bricked / / need help!

I flashed TWRP with odin.
After that I was not able to boot or start recovery.
Only download mode is possible.
In download mode it shows
warranty void 1 (0x030c)
I also cannot flash anything in odin anymore.
After initializing, it immidiatly stops with the error:
<ID:0/004> FAIL! (DeviceInfo)
Can anybody help me, how to get this beautiful phone running again?
Thanks so much!
MOD EDIT:
This member is talking about this.
TEKHD

bill340 said:
I flashed TWRP with odin.
After that I was not able to boot or start recovery.
Only download mode is possible.
In download mode it shows
warranty void 1 (0x030c)
I also cannot flash anything in odin anymore.
After initializing, it immidiatly stops with the error:
<ID:0/004> FAIL! (DeviceInfo)
Can anybody help me, how to get this beautiful phone running again?
Thanks so much!
MOD EDIT:
This member is talking about this.
TEKHD
Click to expand...
Click to collapse
try to download the firmware from http://samfirm.net/threads/official-rom-full-galaxy-note-7-sm-n930f-n930fxxu1apg7-xxv-23-07-2016.98/ and try to flash via odin.
Never ever try to flash anything till the time there is no evidence of success.

I tried that, but the problem is that I always get this error in Odin when trying to flash...

Did you check OEM unlock before you flash as per the instructions? not doing so will result in a boot loop.

Try different cable and USB port. I had trouble with both that had me running in circles.
Sent from my SM-N910T using Tapatalk

Yes, I did OEM unlock before the flash.
Different cable and USB port makes no difference...

Usually when I have issues I try to uninstall all drivers related to phones and only install the one I need. Then after a restart and forcing the phone into Odin I'm able to flash without issues.

It might be failing because of a Partition size error. Have you tried the Samfirm Tool to download a firmware from your region?
Have you tried Emergency Device Recovery from SmartSwitch PC ?
Also, I'm doubtful whether this is a new trick up from Samsung's sleeve. This Phone is still new, so it's quite a learning process. Maybe Samsung has implemented something to block these unofficial flash attempts. However I thank you taking the risk and trying the recovery first.

Can you help me, where I can get this?
Have you tried Emergency Device Recovery from SmartSwitch PC ?

bill340 said:
Can you help me, where I can get this?
Have you tried Emergency Device Recovery from SmartSwitch PC ?
Click to expand...
Click to collapse
Download and install SmartSwitch for PC. Then follow this Video.

I really have no luck here...
Any idea?
Googled already, but did not really find anything besides reinstalling...

I dont think theres a fix for this issue yet. There's also no subtantiated literature in the larger cummunity pertaining to rooting the Note 7.
I am guessing this is an additional precaution taken by Samsung therefore the rooting process needs a very specific set of steps in order to circumnavigate the systems Sammy has put in place. The thread itself says WIP, so I applaud you for your courage.
Nonetheless my suggestion is to instead of waiting for an answer which no one can provide, go to Sammy and bull**** to them that u plugged in the computer and it became a brick.
Theres is no possible senario whereby the internet can help you because we know next to nothing about Note 7.
I sincerely hope that you can come out of the situation with a working Note 7 in your hands whilst not burning a hole in your wallet due to the repairs. God-speed my friend, God-speed.

bill340 said:
I really have no luck here...
Any idea?
Googled already, but did not really find anything besides reinstalling...
Click to expand...
Click to collapse
This seems to be an issue in your drivers, Please uninstall all samsung related and flash box related (if exists) in your PC and try installing it again.
Alternatively, you can just walk into a Samsung Care store and get it done while you wait.

I did that already... No luck. I will try on a different pm next.

Bill sad to see this happened to you
I am exactly coming for the same forum and was following the same steps thought u were, but u took one more step forward and flashed the vitanamese firmware, your phone just messed up there. Was actually about to do the same thing but then read your comments. My phone starts but with errors and has battery drainage , i havent lost anything as it is still virgin and havent transfered anything to it yet. Will wait probably 4 to 5 days more for the official firmwares to release and fire it in.
Sorry to say but u had become the test subject...
---------- Post added at 11:07 AM ---------- Previous post was at 11:03 AM ----------
The recovery mode cannot be accessed, no matter how hard you try
Sent from my SM-N920C using XDA Free mobile app

I just was in the Samsung Care Center in Singapore with my bricked phone.
After 1 hour waiting time, a Samsung guy explained me, that they cannot do anything about it, because they don't have parts ? for this phone in Singapore because it was not launched yet and also there is no international warranty on it.
He had no idea about any software recovery or anything and suggested to get back to Dubai, where I got the phone from.
Really a bad Customerservice experience.
I also want to thank all of you for your great help and suggestions!
I think I will send the phone back to the store in Dubai now.

Well tht will be a good choice
But if u give it three more days and wait for the official firmwares to release would save you some time.
I am still following up with it.
Sent from my SM-N920C using XDA Free mobile app

I really doubt, that this will help, since I cannot flash anything in odin. After initialization I always get the error "FAIL (DeviceInfo)"

bill340 said:
I just was in the Samsung Care Center in Singapore with my bricked phone.
After 1 hour waiting time, a Samsung guy explained me, that they cannot do anything about it, because they don't have parts ? for this phone in Singapore because it was not launched yet and also there is no international warranty on it.
He had no idea about any software recovery or anything and suggested to get back to Dubai, where I got the phone from.
Really a bad Customerservice experience.
I also want to thank all of you for your great help and suggestions!
I think I will send the phone back to the store in Dubai now.
Click to expand...
Click to collapse
Same here in (Dubai) Mate, They don't even have the parts, or Tools to open the device up. If you remember me, I screwed up my Note 7 a week back, Just after two days from launch, and I still didn't receive it. They are still unable to sort it out.
I'm sure when a proper firmware for XSG (Dubai - Same as your device) and a proper ODIN is released to flash the Note 7, this will be a piece of a cake. Just hope for the best, As just like you - I too took a leap of faith and did something stupid.
Anyway, Wishing you luck !

I am not sure if this will help....
What happens when you try a older version of Odin?
Its worked for me in the past, with my s6 edge.