Related
When installing FXP113 to my phone, I found that on bootup I would get an error on the phone process and I had no service. After trying a few different things, I finally found the solution: Install FXP112 first, then install FXP113 over it without wiping data. Here is a step by step tutorial on installing FXP113 on the R800x. It probably would work the same for all Xperia Plays.
Required: Rooted Xperia Play and unlocked bootloader.
Needed Files: FXP112 as modified by Chevyowner
FXP113 as modified by Chevyowner
Replacement build.prop file for R800x
Fastboot - Fastboot+ADB+Fastboot_Drivers.zip
Sony Drivers
Recommended: Boot into recovery and make a Nandroid backup before continuing.
1. Copy the files for FXP112 and FXP113 to your sdcard. You will need to access these from recovery.
2. Install Fastboot. Unzip the file into C:\fastboot.
5. 2. Extract the boot.img of your choice to the fastboot directory. You may use the one in FXP113, or DarkForest3.img or DarkForest4.img (available here.)
5. Enter into Fastboot Mode. - Turn off phone. Hold search button down. Plug in USB cable. The power light should be blue The first time you do this, you will be prompted for the fastboot drivers. They will be in C:\fastboot\fastboot drivers.
6. To flash the new boot image, go to a command prompt and change to the c:\fastboot directory. Then use the following command:
fastboot -i 0x0fce flash boot boot.img <----- the name of your boot image.
7. When finished, remove the usb cable. Power on the phone and enter into Recovery. On some kernels, you will press repeatedly the volume down button; on others, you will press repeatedly on the back button or possibly the search button.
8. You MUST clear Data, Cache and Dalvik Cache. It is also recommended by some people to clear the battery stats.
9. Install zipfile from sdcard. Select the FXP112 file first. Allow it to install and then reboot the phone. (I usually clear data, cache and dalvik again just to be sure.)
10. Activate your phone on the Verizon network.
11. Now shut down and reboot into Recovery again.
12. This time, clear ONLY cache and dalvik cache. Do NOT clear data.
13. Install zipfile from sdcard. Select the FXP113 file this time. Allow it to install and then reboot the phone.
14. Copy the build.prop file into /system. You may want to rename the current one first.
15. Reboot and enjoy! You should be up and running with full data, wifi access now.
re
So for step #10 do u get charged from verizon to activate ur new roms data?
And for #14 do u just copy it via root explorer to /system?
Thanks for taking time to write this
FPlusPS3 said:
So for step #10 do u get charged from verizon to activate ur new roms data?
And for #14 do u just copy it via root explorer to /system?
Thanks for taking time to write this
Click to expand...
Click to collapse
#10 There is no charge to activate the phone if you already have service. It's like dialing *228 and choosing option 1, only the system does it for you.
#14 Yes, you can just copy it to \system, but don't forget to change access to RW before pasting. You may also want to rename the old file first as a backup, although I never have.
Sent from my R800x using XDA
my phone gets stuck at the android screen after i flash fxp112
johnboyjr said:
my phone gets stuck at the android screen after i flash fxp112
Click to expand...
Click to collapse
What kernel did you use?
Did you clear data, cache and dalvik cache before you installed FXP112?
If yes, just for kicks, go clear it again.
Also, remember, the first boot after a clean install takes longer than normal.
Sent from my R800x using XDA
yes i cleared them and and i tried DarkForest4 and fxp112
i waited over 15 min still nothing
johnboyjr said:
yes i cleared them and and i tried DarkForest4 and fxp112
i waited over 15 min still nothing
Click to expand...
Click to collapse
OK. Well, if it were me, the next thing I would do is to flash back to totally stock and get that working. Then try it again.
Sent from my R800x using XDA
What changes are in your build.prop? I've been running fine (except for one or two small problems) with the standard build.prop from FXP112.
crono141 said:
What changes are in your build.prop? I've been running fine (except for one or two small problems) with the standard build.prop from FXP112.
Click to expand...
Click to collapse
I think it was just edited to identify the phone properly as an R800x. PaxChristos told me to use it when he helped me install FXP111 and I have used it ever since. I haven't had any issues at all with it, so you might give it a try if you're on Verizon.
Sent from my R800x using XDA
That was only needed the first time Chevy made FXP111 work, he missed some things in the build.prop that created graphical artifacts in menus and such. All of his builds after that have the correct build.prop now.
Sent from my R800x using XDA
*22899 is the shortcut for activating service in case anyone wanted to just store it for future reference
-and you can also use flashtool to flash back to stock or flash a new kernel
*228 worked fine for me. semcsuite.apk won't show up in my app drawer. I moved it to /system/app and fixed permissions. Still not there.
Sent from my R800x using XDA
Wallrunner said:
That was only needed the first time Chevy made FXP111 work, he missed some things in the build.prop that created graphical artifacts in menus and such. All of his builds after that have the correct build.prop now.
Sent from my R800x using XDA
Click to expand...
Click to collapse
Thanks! Good to know, and one less thing to screw with in the future!
Sent from my R800x using XDA
re
Does Psxperia or XPERIA GAMEPAD games even work on cm9
For some reason, trying use videocall in gtalk worked fine at first, but changing to rear camera made gtalk fc. After that no camera works at all.
GPS only works on maps (no on gps status, or any other app), since my wifi neighbours are all on the google database i'm not sure if the true gps is really working.
And have another annoying things.
I'm hacking all my phones since android 2.1, and I cant consider this release as an true release candidate. Its more beta.
I have a r800i.
FPlusPS3 said:
Does Psxperia or XPERIA GAMEPAD games even work on cm9
Click to expand...
Click to collapse
From what I have read... no. That is why I have not jumped ship to CM. Otherwise I would be there right now. So until they get the touchpads working I will wait, although I have also read they are working on creating from scrathc their own drivers for the touchpads as the current drivers now require SE framework...... so cross your fingers.
Nighty0 said:
For some reason, trying use videocall in gtalk worked fine at first, but changing to rear camera made gtalk fc. After that no camera works at all.
GPS only works on maps (no on gps status, or any other app), since my wifi neighbours are all on the google database i'm not sure if the true gps is really working.
And have another annoying things.
I'm hacking all my phones since android 2.1, and I cant consider this release as an true release candidate. Its more beta.
I have a r800i.
Click to expand...
Click to collapse
Not to be rude or by any disrespect but how isn't it a "true" release? A release is a release..being that it's in beta status doesn't mean it's any less, cm is always changing and improving so there is no hey this is the final version kind of thing..CDMA isn't even supported by cm at all so the fact we have cm9 before verizon gives it to us is amazing. Just to point out, this isn't hacking by any means, android is open source..it's like going into an open store and saying you're breaking in
agraceful said:
Not to be rude or by any disrespect but how isn't it a "true" release? A release is a release..being that it's in beta status doesn't mean it's any less, cm is always changing and improving so there is no hey this is the final version kind of thing..CDMA isn't even supported by cm at all so the fact we have cm9 before verizon gives it to us is amazing. Just to point out, this isn't hacking by any means, android is open source..it's like going into an open store and saying you're breaking in
Click to expand...
Click to collapse
Yes, giving their release to us is amazing, but saying that camera works on changelog, and not even the basic apps like gtalk and camera works, this barely can be considered as working.
As a software engineer I label as a beta, not RC anything. beta is to fix stopper bug like this, RC is for the little annoyances lonely.
For example, my work friend installed another rom on their htc sensation, labeled as beta and all features works, with jagged areas here and there.
And yep, I know the Team FreeXperia is a one guy team
I'm happy with all this releases, only frustrated because the thing is being labeled as working, when not. So I made a report here to make sure another person doesn't make the same mistake as me.
netizenmt said:
Thanks! Good to know, and one less thing to screw with in the future!
Sent from my R800x using XDA
Click to expand...
Click to collapse
actually this build.prop works better it lets Plants Vs Zombies and Asphalt 6 RUN and work
How do install install the custom rom and set up fastboot?
On my stock T210R I experienced the system freeze and reboot just a few seconds after power up, it was all stock.
I installed TWRP 2.7.1.0, then wiped it off. Installed gr8nole's ROM (Nov '13 deodexed, rooted). After doing so, there was a Kernel Panic on boot, so I installed Blackhawk kernel 2.1.
After doing all of the above, it still boots up, comes to the initial setup page, runs a few seconds, freezes and reboots.
Do you think this is a hardware problem?
Any suggestions before I sell it for parts on ebay?
Thanks in advance
logs?
poodleDoo said:
On my stock T210R I experienced the system freeze and reboot just a few seconds after power up, it was all stock.
I installed TWRP 2.7.1.0, then wiped it off. Installed gr8nole's ROM (Nov '13 deodexed, rooted). After doing so, there was a Kernel Panic on boot, so I installed Blackhawk kernel 2.1.
After doing all of the above, it still boots up, comes to the initial setup page, runs a few seconds, freezes and reboots.
Do you think this is a hardware problem?
Any suggestions before I sell it for parts on ebay?
Thanks in advance
Click to expand...
Click to collapse
does it stay long enough to get logs? even if you have to boot a few times to get them onto your pc and check them out from there?
also with twrp there's some unexplained issue of /data getting corrupted on flashes, the only remedy for which seems to be using the format data option.
m
moonbutt74 said:
does it stay long enough to get logs? even if you have to boot a few times to get them onto your pc and check them out from there?
also with twrp there's some unexplained issue of /data getting corrupted on flashes, the only remedy for which seems to be using the format data option.
m
Click to expand...
Click to collapse
Sometimes it goes for several minutes before it freezes, especially if the battery is full, even then apps just randomly close without a notification... Maybe storage related?
Care to share how to gather logs?
Thanks
I would use ODIN or KYES to flash it back to OEM stock firmware. Also remove the micro SD card if you have one in there, sometimes corrupt cards can cause boot loop.
true
moonbutt74 said:
does it stay long enough to get logs? even if you have to boot a few times to get them onto your pc and check them out from there?
also with twrp there's some unexplained issue of /data getting corrupted on flashes, the only remedy for which seems to be using the format data option.
m
Click to expand...
Click to collapse
@moonbutt74 there is a prob with corrupted flashes sometimes sometimes not
but i would just go to odin and reinstall the stock firmware then trt again
sharing
poodleDoo said:
Sometimes it goes for several minutes before it freezes, especially if the battery is full, even then apps just randomly close without a notification... Maybe storage related?
Care to share how to gather logs?
Thanks
Click to expand...
Click to collapse
the answer i got to the same question
http://forum.xda-developers.com/showthread.php?t=1520508
http://forum.xda-developers.com/showthread.php?t=2185929
fyi- you can get a lot of different info from files that have info to give with
cat /directory/file > /sdcard/output.file
mostly from /proc and digging through /sys
when you get something crazy looking that goes on forever press ctrl then c to stop.
m
dsilx said:
@moonbutt74 there is a prob with corrupted flashes sometimes sometimes not
but i would just go to odin and reinstall the stock firmware then trt again
Click to expand...
Click to collapse
The tablet did the same without the sdcard, and I tried a couple times to do a factory reset with no luck.
The fact that it does the same with a different ROM and kernel is what makes me think it's hardware related
moonbutt74 said:
the answer i got to the same question
http://forum.xda-developers.com/showthread.php?t=1520508
http://forum.xda-developers.com/showthread.php?t=2185929
fyi- you can get a lot of different info from files that have info to give with
cat /directory/file > /sdcard/output.file
mostly from /proc and digging through /sys
when you get something crazy looking that goes on forever press ctrl then c to stop.
m
Click to expand...
Click to collapse
Cool, i'll get syslog installed and see if I can find anything.
Weird thing... It's been up for a day now, I have catlog running and recording; the only different thing is that I enabled battery saving mode, and batt is 94%; I have not used any apps other than checking battery and running catlog, but I did not have to use it for it to freeze and reboot...
If it is still running by this evening, I'll enable one thing at a time (GPS, sound, etc...)
Thanks @moonbutt74 and @dsilx
awesome
poodleDoo said:
Weird thing... It's been up for a day now, I have catlog running and recording; the only different thing is that I enabled battery saving mode, and batt is 94%; I have not used any apps other than checking battery and running catlog, but I did not have to use it for it to freeze and reboot...
If it is still running by this evening, I'll enable one thing at a time (GPS, sound, etc...)
Thanks @moonbutt74 and @dsilx
Click to expand...
Click to collapse
Awesome to hear sounds like @moonbutt74 was right
Hope it keeps working have fun
Ok, it seems to be hardware, as soon as I disable Power Saving mode, the tablet freezes and reboots.
As I understand, power saving mode limits the CPU to a lower performance tier; so I think the CPU is having troubles.
Oh well, as long as I don't try to mine bitcoins with the tablet, I should be good to go.
cool
poodleDoo said:
Ok, it seems to be hardware, as soon as I disable Power Saving mode, the tablet freezes and reboots.
As I understand, power saving mode limits the CPU to a lower performance tier; so I think the CPU is having troubles.
Oh well, as long as I don't try to mine bitcoins with the tablet, I should be good to go.
Click to expand...
Click to collapse
Well that sucks u have to have battery saver on all the time but at least its working now
hmmm
p,
out of curiosity, are you running any custom cpu/battery/governor apps ?
are you on 4.1 of 4.2, and have you tried ketut's kernel ?
m
moonbutt74 said:
p,
out of curiosity, are you running any custom cpu/battery/governor apps ?
are you on 4.1 of 4.2, and have you tried ketut's kernel ?
m
Click to expand...
Click to collapse
I'm running rooted deodexed stock ROM with Blackhawk 2.1 kernel.
But as I mentioned in the OP, the problem was there with the full stock device, the new ROM and kernel were installed after the problem started.
ouch
i think you pegged it right with internal storage being damaged.
only thing i can think of besides getting your money back is do a full data partition wipe and format
and a full system wipe and format
either way that has to suck. sorry i couldn't help.
m
http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269 guys head over here, this guys are amazing to bring lollipop to our device. running it right now, as of testing after an hour seems to be pretty stable. don't forget to thank that guys, I'm just sharing in case you haven't seen it yet.
FLaMpeR said:
http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269 guys head over here, this guys are amazing to bring lollipop to our device. running it right now, as of testing after an hour seems to be pretty stable. don't forget to thank that guys, I'm just sharing in case you haven't seen it yet.
Click to expand...
Click to collapse
It's seems like a good port to start out with, but after ready through the thread and noticing all the chaos going on over there, I'll just wait until one of our sprint devs gets something in the making.
Its pretty stable for our device. No reboots at all. Only thing not working for me is downloads app and clear all option in recent apps menu. Of course eventually it'll be getting better
do you have working data?
FLaMpeR said:
Its pretty stable for our device. No reboots at all. Only thing not working for me is downloads app and clear all option in recent apps menu. Of course eventually it'll be getting better
Click to expand...
Click to collapse
Does your data connection work on this rom. when i flashed it my phones cell connection would just reset itself constantly without actually connecting
I have the same problem. I'm just gonna wait for the next build and see if its fixed.
Sent from my LG-LS980 using XDA Free mobile app
cpberndt said:
Does your data connection work on this rom. when i flashed it my phones cell connection would just reset itself constantly without actually connecting
Click to expand...
Click to collapse
I'm using it on GSM sim card and it works great. maybe you need to change APN settings?
unfortunately NFC has been stooped
FLaMpeR said:
http://forum.xda-developers.com/lg-g2/development/rom-cyanogenmod-12-0-lg-g2-t2944269 guys head over here, this guys are amazing to bring lollipop to our device. running it right now, as of testing after an hour seems to be pretty stable. don't forget to thank that guys, I'm just sharing in case you haven't seen it yet.
Click to expand...
Click to collapse
Hii I flashed the ROM just few mins ago every thing went well but it says unfortunately NFC has been stopped and it is not allowing me to go further to take actions
abhinayatluri said:
Hii I flashed the ROM just few mins ago every thing went well but it says unfortunately NFC has been stopped and it is not allowing me to go further to take actions
Click to expand...
Click to collapse
which build are u on? I'm using 11/18 build and there's no NFC FC error
Yeah iam on 11/18 but its not working any ready for that?
abhinayatluri said:
Yeah iam on 11/18 but its not working any ready for that?
Click to expand...
Click to collapse
I have a clean flash.
have you tried clean flash? (in recovery wipe >> advanced wipe and wipe everything except internal storage. )
edit: just dirty flashed 11/19 and got nfc FC error. I'll try now clean flash
Edit1: same after clean flash of 11/19 seems error is in this build. Experimental with nfc fix 1 works great
Yeah I did the same but the NFC error do exists....
which model r u using..iam on lg ls980
So what now guys? Is NFC working or not?
it do exists for me...i flashed the rom cleanly..any remedy available with u ??
guys with nfc FC error on boot, go to recovery mount system. then go to advanced from twrp menu >> file manager go to system app nfc folder and delete nfc folder. reboot and here u are. even 11/19 build is working good after that and recent apps menu clear all button is fixed there too
FLaMpeR said:
guys with nfc FC error on boot, go to recovery mount system. then go to advanced from twrp menu >> file manager go to system app nfc folder and delete nfc folder. reboot and here u are. even 11/19 build is working good after that and recent apps menu clear all button is fixed there too
Click to expand...
Click to collapse
Thnx flamper its working...but when iam trying titanium back up app it says there is no root access...any remedy for that ??
Flash supersu via recovery rom isn't rooted http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
FLaMpeR said:
Flash supersu via recovery rom isn't rooted http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
Click to expand...
Click to collapse
its working flamper
Any way to shut off mobile data. I have limited.
Sent from my LG-LS980 using Tapatalk
FLaMpeR said:
I'm using it on GSM sim card and it works great. maybe you need to change APN settings?
Click to expand...
Click to collapse
I have LS980 running on international gsm sim, stock 4.4.2.. Do you mean to say I will still get network and data if I flash it ?!
Hey guys, first i come from VN and my English is not good. Hope everyone can understand.
My device sometimes stop working then auto reboot. The screen auto off and about 3-4 second the led turn red color and the screen turn on then screen blur little with some blur stripe and it auto boot. It's make me scare :"( do you have same problem and what can we do to stop it?
My device still work ok but sometimes this happen.
Thanks.
Try factory reset, otherwise you need to send the device for repair. I do not have any issue with my Z5 the only issue I had was when my MicroSD card stop working (could not write to it could only read) and my device rebooted and slowed down. I replaced my MicroSD card and everything is great since then.
Sent from my SO-03H using Tapatalk
francisamarsingh said:
Try factory reset, otherwise you need to send the device for repair. I do not have any issue with my Z5 the only issue I had was when my MicroSD card stop working (could not write to it could only read) and my device rebooted and slowed down. I replaced my MicroSD card and everything is great since then.
Sent from my SO-03H using Tapatalk
Click to expand...
Click to collapse
Ok maybe i should find another way, i have unlocked BL so i think it is the problem
You not alone same exactly like me your install xpose?
DamBadz said:
You not alone same exactly like me your install xpose?
Click to expand...
Click to collapse
no my device not have xpose, i install xpose but it is not work, iit said that i hhave some problem with framwork and maybe i must flash via recovery to use it. then a del it )
dante224 said:
no my device not have xpose, i install xpose but it is not work, iit said that i hhave some problem with framwork and maybe i must flash via recovery to use it. then a del it )
Click to expand...
Click to collapse
Ok bro don't worry it look scary i know
DamBadz said:
Ok bro don't worry it look scary i know
Click to expand...
Click to collapse
hey, can you reply Auras79 ? i can't reply bcoz i am a new user. if you can, please said him still his rom but just keep stock sound don't increase volume at http://forum.xda-developers.com/z5-premium/development/ub-romaur-v1-0-xpz5p-170-fast-stable-t3259875
Thanks alot bro:good:
dante224 said:
no my device not have xpose, i install xpose but it is not work, iit said that i hhave some problem with framwork and maybe i must flash via recovery to use it. then a del it )
Click to expand...
Click to collapse
I'm 99% sure the reason is that you install custom firmware and xposed module, but mess something up... as a result you get a lot of garbage in System UI and Launcher UI settings.
The common reason of reboots is lag in framework which controlls OVERHEATING...device think that CPU temp is critical and reboots.
So if you are scared about this, my advice is to install clean STOCK firmware,
p.s. but installing of xposed module is fixed already and you can find very detailed guide http://forum.xda-developers.com/crossdevice-dev/sony/workaround-bootloops-xposed-lollipop-t3089203
and the part of it you need is
Quote:
by @mionica
Anybody who is still having any kind of issues, for whatever reason, please do the following:
get into TWRP;
install, in this order, without rebooting:
xposed-uninstall-v1.1.zip
If you don't have an sd card, you'll need to reboot once after the uninstall .zip, boot the system normally, then get back in the recovery and install the other 3. This only applies to people who don't use an SD card
xzdr-busybox-enable-v1.0.zip
xposed-sdk21-arm-date.zip
xposed-leakplug-v1.2.zip
copy the logs to the PC, over USB:
uninstall_xposed.log
install_busybox.log
install_leakplug.log
each of the 3 zip's will tell you where it saved the log (it's usually the external sdcard)
reboot to system
Thanks in advance for not asking any questions about whether you have to do any of these steps; yes, you have to.
Easy
Cheers
vital21 said:
I'm 99% sure the reason is that you install custom firmware and xposed module, but mess something up... as a result you get a lot of garbage in System UI and Launcher UI settings.
The common reason of reboots is lag in framework which controlls OVERHEATING...device think that CPU temp is critical and reboots.
So if you are scared about this, my advice is to install clean STOCK firmware,
p.s. but installing of xposed module is fixed already and you can find very detailed guide http://forum.xda-developers.com/crossdevice-dev/sony/workaround-bootloops-xposed-lollipop-t3089203
and the part of it you need is
Quote:
by @mionica
Anybody who is still having any kind of issues, for whatever reason, please do the following:
get into TWRP;
install, in this order, without rebooting:
xposed-uninstall-v1.1.zip
If you don't have an sd card, you'll need to reboot once after the uninstall .zip, boot the system normally, then get back in the recovery and install the other 3. This only applies to people who don't use an SD card
xzdr-busybox-enable-v1.0.zip
xposed-sdk21-arm-date.zip
xposed-leakplug-v1.2.zip
copy the logs to the PC, over USB:
uninstall_xposed.log
install_busybox.log
install_leakplug.log
each of the 3 zip's will tell you where it saved the log (it's usually the external sdcard)
reboot to system
Thanks in advance for not asking any questions about whether you have to do any of these steps; yes, you have to.
Easy
Cheers
Click to expand...
Click to collapse
Dear Sir, im very happy with your's help, everytime i flash Aroma Rom, everytime i have this problem @@ when i used flashtool to flash stock FW .170 My device clearly and this problem not happened @@
Code:
[B][U]Disclaimer:[/U][/B]
I am not responsible for any damage to you your device. Everything you do, you do on your own risk!
Last year I got a Galaxy Tab E (SM-T560) from Samsung for free as gift to my new mobile phone.
Unfortunately the ROMs for SM-T560NU tabs are not working on that device, but I found a working ROM of LineageOS 14.1 (Android Nougat 7.1.2) on the following page:
How to install Android Nougat on the Galaxy Tab E (SM-T561)
Click to expand...
Click to collapse
Original source (Russian language)
Click to expand...
Click to collapse
LineageOS 14.1 (formerly known as CyanogenMod) ROM is based on the Android stock ROM released by Google, which the LineageOS team modifies.
Credits go to the LineageOS team for making this ROM available to many devices and to independent developers like Ma3a_XaTa for porting this ROM to the Tab E SM-T561.
Click to expand...
Click to collapse
Just installed it to my tab and it seems working well!
I used the instructions from a comment at the bottom of the page:
Downloads:
ROM: LineageOS 14.1
Gapps: The Open GApps Project
Boot Image: boot.img
SoftKeyFix: KeyFix
Recovery: TWRP Recovery for Tab E
Root: SuperSU
Click to expand...
Click to collapse
Prerequisites:
1. Make sure you have TWRP 3 installed (HowTo)
2. Move the downloaded files to your Micro SD Card (>4GB recommended)
3. >50% battery charge
4. Some patience.
Click to expand...
Click to collapse
Installation:
1. Boot to TWRP 3 (Power + Home + Volume Up) and Swipe to allow modifications
Note: Make sure to Backup EFS and Modem to Micro SD Card in TWRP.
2. Wipe > Advanced Wipe > (Select Dalvik Cache, System, Data, Internal Storage, Cache ONLY) > Swipe to WIPE
3. Install > Select Storage > Micro SD Card > Select lineage-14.1-20180419-UNOFFICIAL-gtel3g.zip
4. Add More Zips > open_gapps-arm-7.1-pico-2018xxxx.zip
5. Add More Zips > keys.zip
6. Swipe to confirm flash and wait for 5-10 mins
7. After the Flash process DO NOT restart system.
8. Go back to Install > Install Image > boot.img > Select Boot Partition > Swipe to confirm flash
9. After the boot.img has been flashed DO NOT restart system IF you want Root.
10. Go back to Install > Install Zip > SR3-SuperSU-v2.82-SR3-20170813133244.zip > Swipe to confirm flash
11. Now Restart System.
12. Wait 10-15 mins, it will take some time.
13. Enjoy Lineage OS!
Click to expand...
Click to collapse
Known bugs:
- Charging while the device is off works, but does not show battery charge indicator animation.
Click to expand...
Click to collapse
Good luck and enjoy!
Code:
[B][U]Miscellaneous:[/U][/B]
[URL="https://www.hardreset.info/devices/samsung/samsung-t560-galaxy-tab-e-96-wifi/download-mode/"]HowTo bring the Tab to DownloadMode[/URL]
Hints & Tips:
1. To improve the speed of the tablet, turn of animations inside Developer Options.
2. You can also install an app freezer called "Icebox" to temporarily disable RAM hungry apps like Facebook, Chrome etc.
3. To ensure longer battery life, disable “double tap to wake” hidden somewhere in the settings (use the app called "Kernel Adiutor" from the Playstore).
4. If you don’t plan to put a SIM on this thing or if you are having a SM-T560 only, put it in airplane mode and then turn on your WiFI when needed. Turn of GPS/location or even sync when not necessary.
5. Disable "Adaptive Display" in the settings. It seems to make the tablet slower.
6. Improve the battery life of the tab by using an app called “L Speed“ (available in Playstore).
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
mimuta said:
Hello, great post. I used this ROM before, but after some time it just stops working. You can't boot it anymore.
How long do you use it already?
Click to expand...
Click to collapse
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
SeeDoubleYous said:
I'm using it now for approx. 3 weekswithout any problems. How long did you use it?
BR, See
Click to expand...
Click to collapse
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
V3rdeV1ntage said:
I was wondering what version are you running? Everytime j download one it fails to flash through TWRP? You got a link to a download ??
Click to expand...
Click to collapse
What version of TWRP are you using & what error do you get?
Have someone passed safetynet check ? Can you help me with pass?
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Problems of ignition and charge of battery
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
s5minimalist said:
The ROM is running ok so far on my T560, but I noticed some problems:
* If the tablet runs out of battery with Wifi activated, charging and booting it up causes a boot loop until Wifi is turned off. Something like that... it sometimes gives you the time to open the settings and turn off Wifi before it reboots.
* The Tablet's battery is drained by "Mobile Standby" in approx. two days, regardless of power save, battery saver and/or flight mode. When the Tab is idle all the time, the battery graph runs down in a straight diagonal line until the battery is empty, approx. 2 % per hour. Did not find a way to disable Mobile Standby on my T560 which doesn't even have a modem (maybe that's the problem).
* The system is a bit laggy given that it's a quad core, but turning off Animations helped. I suspect hardware acceleration does not work.
I'd switch to a better rom if I find one. But thanks anyways for the information and work! Better than nothing, I guess
Click to expand...
Click to collapse
I have my T560 all the time in airplane mode with Wifi on. Battery drain is no problem at all.
It is also written in my second post:
HTML:
https://forum.xda-developers.com/showpost.php?p=78977223&postcount=2
aribetty said:
Hello friends, I need a help I have a Samsung Tab E 9.6 = SM.T561, I installed Roon Custom Lineage 14.1 with TWRP, but the Tablet was downloaded and I can not charge it or turn it on, I searched everywhere and nobody gives me answers . I appreciate the help given. Thank you
Click to expand...
Click to collapse
I had a similar problem in the beginning. Seemed as the tab was in a bootlooporsomething similar with black screen.
The only solution I found was to wait some days until the battery was empty, charge the tab and directly started to download/recovery mode and flash it again.
Now it is working fine with this ROM.
Rittachi said:
Hi, I hope someone who has tried this rom can give me some feedback on it. My main concern its if this is stable and faster than ron. Any idea?
Click to expand...
Click to collapse
I am using it now for ~2.5 months and I am quite happy with it.
It is much better then the stock ROM.
Hi @SeeDoubleYous and guys. I was reading the Forum and decided to share with you my experience with this ROM. Well, I'm owner of a SM-T560 (in US and Canada this model is T560NU I don't know why it's different just in these two countries ). Anyway....
I made all the steps described on the step-by-step Instructions. (TWRP Recovery via ODIN, Root, ROM, GAPPS, etc etc etc).
I'll be honest with you. My t560 turned in a piece of sh... Very Slow, Apps Stucking all the time, sometimes bootlooping too... i used the Tab for almost 3 weeks. After that I decided to reset the device and I did all steps again using the same ROM (I reinstalled the TWRP RECOV via ODIN, proceeded a Factory + Internal Memory Wipe, Installed the LINEAGE 14.1 OS, etc, etc, etc) But this time I choose the "Micro" GAPPS option instead "PICO". Installed Root SU, etc, etc exactly as the directions wrote in the top page.
For my surprise, It's perfect Now!!!! ROM is great.... No problems of RAM, Bootlooping, Stucking, APP crashing... Absolutelly Nothing!
I don't know why, but it seems that the secret is install for first time and use for some weeks even its is not working fine. And After that, proceed All the step-by-step again from the very beggining. (Reinstall TWRP, ROM, GAPPS, Keys, "Boot Image" and ROOT SU). It will work fine on SM-T560 just from the second Install on.....
All Best guys
I need help. My screen is stuck on boot again
Am I bricked?
Hi guys, I've got a T560 tablet with the official ROM and I'm researching to upgrade it's software.
Currently I'm away off-shore for work but as soon as I get home I'll try this ROM.
I've been a fan of CyanogenMod since the early days and I'm eager to try it so I can bring some new life into my old tablet.
Since this ROM is for the SIM card variant T561 I was searching for a way to disable the Radio altogether and I found this:
https://android.stackexchange.com/q...le-radio-signal-in-a-phone-without-a-sim-card
Basically it disables the RIL with a simple Terminal Command:
Code:
su -c "setprop persist.radio.noril 1"
Can someone try this and see if its working properly? (OFC after a Back-up is done) Its persistent through reboots so you don't need to use Airplane Mode anymore and maybe it will help with the battery draining problem.
Also one question for the guys who are currently using this ROM:
Is Magisk working? After everything is set-up can we uninstall SuperSU and install Magisk for root?
Thank you,
Have a nice day!
SpawNyK said:
Code:
su -c "setprop persist.radio.noril 1"
Click to expand...
Click to collapse
I've tried the command and it worked, no reboots even if the airplane mode is off and no problem so far.
I don't know if the battery life is better now because I've just done it.
For the other question, I haven't tried because I like SuperSu, but I think there's no problem.
gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
Can you please provide a guide for flashing this?
Like which GApps version should I use, etc...
I get in red, does something affect ROM? e: unknown command [log]
Hey,
does this rom works with SM-T562??? (3G)
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
gucio1976 said:
And what do you think about it.
https://mega.nz/#!49QXRIAb!7FtqWknBNzIe5-Ak-Jgmq7N71JB4TcGEi-MjuQCuvhw
Click to expand...
Click to collapse
gucio1976 said:
I found it here .
https://www.youtube.com/watch?v=-4h_3qDRiv8
Click to expand...
Click to collapse
Why should you use the old version, if this thread offers a newer one?
gucio1976 said:
---------- Post added at 11:33 ---------- Previous post was at 11:13 ----------
Something else. Maybe it will be useful to someone.
https://www.youtube.com/watch?v=7JpUomQs2ok
Click to expand...
Click to collapse
I think that's the same version as offered here...
shreejalm said:
Is there any updated ROMs like LOS 15 or 16 for SM-T561 (gtel3g), I tried to Port LOS 16 but I get error 7 while flashing in TWRP(V3).
Click to expand...
Click to collapse
I did not find any new version. The ones available are only working with the SM-T560NU....
Sorry!