Related
Hi,
I've lost my charger, and I don't know if I can charge it with a charger with 5v - 1A or not, what I do know is that charging with USB is 5v - 500mA.
What's the power of the SE Arc original charger?
On the charger it says output 5V 1A
Is that what your looking for
It's Exactelly what I'm looking for thank you very much
The original SE charger for the arc is the GreenHeart charger EP800. It has got an output of 5V; 850mA.
As far as I know, there's no SE charger with an output of 1A. I've seen chargers with 500mA, 700mA and the 850mA.
My charger got fried during a power surge while holidaying in India so after asking around on the forum, I bought a Nokia AC-10N charger with an output of 5V, 1200mA. I've been using it without any problems. Pretty happy with it. Charges the phone much faster.
Thank you, that helps very much, but I heared charging the phone with higher voltage or higher Amperage can charge it faster, but it lowers the battery life on the long terme, it's appreciated to charge it with lower power in order to preserve battery life
MehdiArc said:
Thank you, that helps very much, but I heared charging the phone with higher voltage or higher Amperage can charge it faster, but it lowers the battery life on the long terme, it's appreciated to charge it with lower power in order to preserve battery life
Click to expand...
Click to collapse
Totally true on all counts. You can really use ANY usb charger to charge your Arc, but the higher the mA the faster it will charge. And the higher the mA, the less overall life your battery will have. If it's normally supposed to be good for 5000 recharges, it might drop to 4000 recharges (just numbers pulled out of thin air).
The "Normal" standard for USB power is 0.5A (or 500mA). The iPad for example uses 1.0A, or twice as much as standard. Now in the iPad's case, it refuses to charge with anything less. I don't know if that's true for the Arc or not...if so, and the SE charger is rated at 850mA, then that's probably as low as you'd want to go just to be on the safe side.
Personally, I'm willing to use the iPad's charger and charge a bit faster for a bit lower useful battery lifetime. A new battery I can buy....time spent waiting for my phone to be charged I can't get back
The amperage rating on a charger defines the maximum current the charger is capable of supplying. A 1A charger doesnt force 1A down the throat of whatever's connected to it, if you connect something can only manage to pull a maximum of 500mA then it will only get 500mA.
Consumer power supplies are generally constant voltage. E.g. a 5V charger will supply 5V to anything connected to it. The amount of current that the device will draw at 5V is the amount it was designed to draw, up to the limit that the charger can supply. If the charger cant supply enough, generally you just get slower charging (though some poorly designed devices will just refuse to charge at all). What *will* tend to destroy your device quickly is a voltage mismatch, e.g. connecting a 5V phone to a 12V charger.
You can get constant current power supplies. These ramp up the voltage in order to force the required current out regardless of what's attached to it (even if that's a human being). They are scary.
daveybaby said:
The amperage rating on a charger defines the maximum current the charger is capable of supplying. A 1A charger doesnt force 1A down the throat of whatever's connected to it, if you connect something can only manage to pull a maximum of 500mA then it will only get 500mA.
Click to expand...
Click to collapse
Exactelly what I was thinking, thanks.
Now I think I can charge my Arc with 1A without any problem, since it's gonna take only 850 mA from it
just wondering if it's safe to use my hp touchpad charger on the gio
Wall AC to USB power adapter, which has input specifications of 100-240 Volt 50–60 Hz 0.4 Amp AC, and output specifications of 5.3 Volt 2.0 Amp DC. It is cylindrical roughly the size of a "D" battery with a foldable 2-prong AC connector and Standard-A USB socket on its two ends.
Click to expand...
Click to collapse
pretty high amperage, is it safe to charge with it? done it twice already
Standard charger have 5V output and 0,7A out. I do not recommend the use of higher voltages and currents, can lead to overcharging and thus the explosion.
The internal "censor" of the cell can and wil be fried wen you continue.
0.7 vs 2.0 is about 3 times faster, truth but also a bigger ammount in a shorter time.
If the cell not capable for that, it wil overheat and at worst case it wil blow up in your face...................
And take a second gues, those are not the most expensive celles.............
So, I have powerbank and I have 2 ways of charging: 1A and 2.1A. which one to use when charging my note 2?
Handwritten from my Note 2
Depends on the cable you'd use. Samsung cable will go near 2amp, generic ones do about 1 amp
kebabs said:
Depends on the cable you'd use. Samsung cable will go near 2amp, generic ones do about 1 amp
Click to expand...
Click to collapse
I have samsung cable.. So is it smart to charge via 2.1 A ? Can it do some damage on the phone ?
I have a Momax external battery and have charged the phone with the 2.1A port. It didn't heat up, it didn't have any problems. I was planning on measuring the exact amperage that comes out of the samsung charger and the momax battery (iPower Pro), but I didn't get around to it, because I suspect the difference is actually smaller. There are many people who used more powerful chargers to charge their phones faster, and the only thing that degraded was the battery lifespan, but the difference in those cases was upwards of 0.5A between the original and the new charger. I find the 0.1A to be a small difference and I have no problem using the 2.1A port on the iPower.
So to answer your question, no, it won't damage your phone. Theoretically it damages your phone's battery, but it degrades anyway due to charging cycles, so you won't notice any damage caused by the extra 0.1A unless you plan on still using the note 2 10 years from now.
sandulea said:
I have a Momax external battery and have charged the phone with the 2.1A port. It didn't heat up, it didn't have any problems. I was planning on measuring the exact amperage that comes out of the samsung charger and the momax battery (iPower Pro), but I didn't get around to it, because I suspect the difference is actually smaller. There are many people who used more powerful chargers to charge their phones faster, and the only thing that degraded was the battery lifespan, but the difference in those cases was upwards of 0.5A between the original and the new charger. I find the 0.1A to be a small difference and I have no problem using the 2.1A port on the iPower.
So to answer your question, no, it won't damage your phone. Theoretically it damages your phone's battery, but it degrades anyway due to charging cycles, so you won't notice any damage caused by the extra 0.1A unless you plan on still using the note 2 10 years from now.
Click to expand...
Click to collapse
Thanks for reply mate ! I was thinking the same, but i needed some sort of confirmation tho
Use the 2.1A one.
The phone should only draw 2A from it anyway, that just means the port is capable of supplying 2.1A.
Using the 1A port will just charge your phone slowly, the 2.1A port should charge it as quick as the official charger, depending on which cable you use.
It is a matter of supply and demand. All USB devices can safely be plugged into any USB charger. Given an unlimited amount of current available from the charger, each device will still only draw only as much current as it is designed to draw. If the charger is rated 2.1 Amps or 5 Amps or 10 Amps, a 1.5 Amp device will still only draw 1.5 Amps. The charge rate will be at maximum Think of it like your house wiring. The circuit may have a 20 Amp circuit breaker in the basement but we plug in 40 Watt bulbs and 100 Watt bulbs and TVs and electric shavers that all draw different amounts of current. The 100 Watt bulb uses less than an amp but is unharmed being plugged into a 20 Amp receptacle (charger). Now we come to the flip side. If the charger Is rated lower than the device it just charges slower than it would if the charger could supply at least as much as the device uses. To go back to our example, the 1.5 Amp device plugged into a 1 Amp charger will take longer to charge that it would with a charger rated 1.5 Amps or higher. My analogy has one hole. If the stuff plugged into the house receptacles exceeds 20 Amps the circuit breaker pops. This will not happen with USB chargers as they limit the current and will not try to supply more than they are rated for. Stick to chargers rated as high as the one that came with your device or higher and you will be fine
Ordered a QI charger off Amazon (the same Lerway Chinese brand one everyone seems to get) and it's charging incredibly slow. Not sure if the app I'm using to record the charge rate is incorrect or I'm not reading it correctly but it says it's charging at only +200mA max sometimes as slow as <50mA.
Anyone else experience this?
skusa93 said:
Ordered a QI charger off Amazon (the same Lerway Chinese brand one everyone seems to get) and it's charging incredibly slow. Not sure if the app I'm using to record the charge rate is incorrect or I'm not reading it correctly but it says it's charging at only +200mA max sometimes as slow as <50mA.
Anyone else experience this?
Click to expand...
Click to collapse
What kind of power source you use to power the charger and what kind of cable do you use?
If you connect the charger to computer USB port it will not provide enough power for the charger. Same with cheap cables, like the ones mostly included with the generic QI chargers. You need a premium USB cable.
Also if you have a thick case on your phone it will diminish the charging current received by a coil in your phone.
Firstly check how much power and what current your charger gets, so instead of plugging the QI charger, plug your phone and check what amperage you get (I use Current Widget). If it's less then 1600mA (maximum amperage that N5 will allow from direct charging through cable) your charger is underpowered and you need to change socket charger to 2A one. If you're using 2A socket charger and still get under 1600mA then your micro USB cable isn't good enough.
Properly and fully powered Qi charger should charge your bare phone (without a case) at about 700-800mA.
Znamir81 said:
What kind of power source you use to power the charger and what kind of cable do you use?
If you connect the charger to computer USB port it will not provide enough power for the charger. Same with cheap cables, like the ones mostly included with the generic QI chargers. You need a premium USB cable.
Also if you have a thick case on your phone it will diminish the charging current received by a coil in your phone.
Firstly check how much power and what current your charger gets, so instead of plugging the QI charger, plug your phone and check what amperage you get (I use Current Widget). If it's less then 1600mA (maximum amperage that N5 will allow from direct charging through cable) your charger is underpowered and you need to change socket charger to 2A one. If you're using 2A socket charger and still get under 1600mA then your micro USB cable isn't good enough.
Properly and fully powered Qi charger should charge your bare phone (without a case) at about 700-800mA.
Click to expand...
Click to collapse
Thanks for the info I thought I was going crazy.
No case so that isn't an issue.
I have the phone connected direct to a 3A charger currently and am only getting 995mA charge rate with the screen on and it looks like full 1.5A with the screen off. Maybe a defective QI charger?
Nope. Everything is normal. You just need a better cable that will manage to transfer 2A of current.
QI charger needs 2A input to give 1A output on a coil. Giving about 70-80% efficiency rate, your phone would be getting about 700-800mA.
Since your charger gets only about 1A input it gives about 500mA output. Therefore giving that efficiency rate, your phone should be getting about 350-400mA tops. It is possible that your charger has lower efficiency rate (some have about 50-60%), so the values that you're getting are pretty normal unless you use a premium micro usb cable, preferably with thicker, like AWG24 or lower (the lower value the better) power wires.
Might want to try these cables, a lot of people have had great luck with using them on Qi chargers. Don't know which length you would need, they have 3 and 6 foot cables. For the price, I'm ordering 6 6ft cables.
http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030307&p_id=9762&seq=1&format=2
Hey!
I noticed recently that my G5 charges quite slow. So I tested all of my powerbanks, cables, and wall chargers, in various combinations. I had 4 different powerbanks, 3 wall chargers, and 4 cables.
I used a USB ammeter to measure the power draw going through the USB cable.
On the motorola charger and cable that came with the phone, it charges at 1.8a. I then charged my phone from each powerbank and wall charger, using each cable in turn. The average charge speed for my phone was about 0.5a. Out of 28 combinations, only 2 yielded a draw over 1a.
I have created a spreadsheet detailing the charge speeds of each combination, but unfortunately cannot post it yet (10 post permissions).
I then charged my USB powerbanks from the same wall chargers, using the same cables. One powerbank charged at over 1a with every combination, and reached over 2a on numerous combinations. This proves that the cables and wall chargers are not at fault, it is a phone issue.
Why? Has motorola put something in their chargers that 'talks' to the phone, and allows for faster charge speeds? 0.5a is awful!
Secondly, does anyone know of cables that I can buy, which will support fast charging for the motorola? I have looked at genuine motorola cables, but there is no way to tell one from the other.
Thanks!
Paul
P.s. charge speeds were the same, whether the phone was switched on or off.
Welcome @agour
I've come up to a similar conclusion with a lot less data (thus I didn't share them).
I caught power consumption at the wall outlet when charging my device with two chargers: Motorola stock charger and a Samsung Adaptive Fast Charger.
The Samsung has the following specs: 5V 2A or 9V 1.67A with fastcharging capable device.
Using Samsung Adaptive fast charger and Samsung 1.5m cable : 6W, so the device charges at something like 5V 1.2A...
Using Samsung Adaptive fast charger and the cable provided with my XT1676 : 11.3W (which is coherent with the max 9V 1.6A, and would mean the charger provides 2.2A if at 5V which more than the specs.)
Using stock charger and stock supplied cable : 11.3W ==> fast charge for similar reasons as above
Using stock charger and Samsung 1.5m cable : around 6W ==> low power charge
I'd need a USB multimeter to confirm those data. (mostly due to the variable voltage that can provide fast charge adatpers)
matmutant said:
Welcome @agour
I've come up to a similar conclusion with a lot less data (thus I didn't share them).
I caught power consumption at the wall outlet when charging my device with two chargers: Motorola stock charger and a Samsung Adaptive Fast Charger.
The Samsung has the following specs: 5V 2A or 9V 1.67A with fastcharging capable device.
Using Samsung Adaptive fast charger and Samsung 1.5m cable : 6W, so the device charges at something like 5V 1.2A...
Using Samsung Adaptive fast charger and the cable provided with my XT1676 : 11.3W (which is coherent with the max 9V 1.6A, and would mean the charger provides 2.2A if at 5V which more than the specs.)
Using stock charger and stock supplied cable : 11.3W ==> fast charge for similar reasons as above
Using stock charger and Samsung 1.5m cable : around 6W ==> low power charge
I'd need a USB multimeter to confirm those data. (mostly due to the variable voltage that can provide fast charge adatpers)
Click to expand...
Click to collapse
Interesting! It's suprising how much difference the combinations can make.
I don't think I have experienced this on a phone before, however I have never felt the need to test it...
I tested the original cable that came with the phone, and an off the shelf 'genuine motorola cable'. The stock cable is still the fastest, however the secondary cable still worked very well.
Interestingly, one of my powerbanks will charge at 2.2a from pretty much EVERY powersource and cable combination. This is with 7 cables tested, and 3 USB wall adapters.
Shame that motorola doesn't allow their phones to draw maximum power from hardware that can provide it..
agour said:
Interesting! It's suprising how much difference the combinations can make.
I don't think I have experienced this on a phone before, however I have never felt the need to test it...
I tested the original cable that came with the phone, and an off the shelf 'genuine motorola cable'. The stock cable is still the fastest, however the secondary cable still worked very well.
Interestingly, one of my powerbanks will charge at 2.2a from pretty much EVERY powersource and cable combination. This is with 7 cables tested, and 3 USB wall adapters.
Shame that motorola doesn't allow their phones to draw maximum power from hardware that can provide it..
Click to expand...
Click to collapse
If I have some time, I may test internal impedance of the cables, it is possible that the device somehow probes the cable (or the cable + charger) and then decides if it can or not draw that much power without overheating/melting the cable; and then it will negotiate the quickCharge with the charger.
there has been a discussion about quick charge on this thread a while ago (before I got this devices : https://forum.xda-developers.com/g5/help/quick-charge-3-0-support-t3632457)
Lenovo adds the following that I have not tested:
Lenovo said:
If your device is below 78%, but it does not begin Turbo charging when you plug it into the Turbo Charger, try uplugging and plugging back in using one fluid motion.
Click to expand...
Click to collapse
[Source]
It is quite obvious that especially cheap cables will charge phones much slower as the resistance is too high, even if the phone does not perform any checks. Those cables are basically too thin. Resistance limits the current (amps) that can flow. Newer phones most likely just look at the charge current during the first x seconds (or less) and then decide wether to enable fast charging or not to keep the cable from heating up. A wire with high resistance is basically a heater. So it's a necessary safety feature (from the companies POV).
Regarding the power bank, it may be possible that this particular design provides a voltage slightly higher than the nominal 5 volts (still fine for most devices), which helps overcome the resistance. That is also the reason why the Samsung fast charger provides 9V: You don't need a cable as thick as with 5V.
Keep in mind that the USB specifications only recently got updated for such high charging currents, so it is advisable to use only the cable that comes with the phone as USB cables in general don't need to provide such high currents by spec!
71n4 said:
It is quite obvious that especially cheap cables will charge phones much slower as the resistance is too high, even if the phone does not perform any checks. Those cables are basically too thin.
Resistance limits the current (amps) that can flow. Newer phones most likely just look at the charge current during the first x seconds (or less) and then decide wether to enable fast charging or not to keep the cable from heating up. A wire with high resistance is basically a heater. So it's a necessary safety feature (from the companies POV).
Regarding the power bank, it may be possible that this particular design provides a voltage slightly higher than the nominal 5 volts (still fine for most devices), which helps overcome the resistance. That is also the reason why the Samsung fast charger provides 9V: You don't need a cable as thick as with 5V.
Keep in mind that the USB specifications only recently got updated for such high charging currents, so it is advisable to use only the cable that comes with the phone as USB cables in general don't need to provide such high currents by spec!
Click to expand...
Click to collapse
That sounds correct, although my Samsung wall adapter is fast charge capable, and was provided with a cable (and not a cheap one), that basically can't be use for fast charging with the G5, that looks silly...