Hi all. About to order the phone and looking at the US Sony site.. there doesn't seem to be a charging dock for this on there yet. I was hoping you guys could recommend a dock that will fit this phone with a case on (Rearth Ringke Fusion to be specific). A link to the specific one would be appreciated. Thanks!
Get any dock (DK48 is the Z3 series one) remove all the inserts, get some Velcro or thick felt, line the dock - your phone will fit with any case.
Example: I'm using a DK48 with no insert, and a bit of felt, the phone leans back a little but it charges fine.
I've brought other docks too, they're all essentially the same, the only difference is the thickness of the insert, I've found though that no insert works if your case is a bit thicker than very thin.
one of the amazon reviews for the DK48 says to just get the DK36, which was made for the Z2, since it's a bit larger. can anyone confirm that this will fit the Z3C with a case, without removing the inserts?
I can confirm it doesn't, as I have both this and the DK48
Can i insert Z3C with both tempered glass from rear and front in DK36 dock?
Probably, minus insert, with some felt. There are threads here about people modding their docks.
I modified a dk36 dock I got to fit my z3 compact with the ringke case. Check the pics.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my D5803 using Tapatalk
Get one of these, works with all my cases including my Cruzerlite which is quite thick. Doesn't work with the Roxfit Book Case because it flops forward because there's no front piece.
http://pages.ebay.com/link/?nav=item.view&alt=web&id=361083114578
Magnetic Desktop Charging Sync Dock Cradle Charger for Sony Xperia Z3 + Compact
NickR said:
Get one of these, works with all my cases including my Cruzerlite which is quite thick. Doesn't work with the Roxfit Book Case because it flops forward because there's no front piece.
http://pages.ebay.com/link/?nav=item.view&alt=web&id=361083114578
Magnetic Desktop Charging Sync Dock Cradle Charger for Sony Xperia Z3 + Compact
Click to expand...
Click to collapse
yea i ordered one of those also from amazon along with a Deff adapter. seems like the only option for those with cases
Sony DK36+Ringke smokes case+Tempered glass = no problems.
Just like my title states, no problems. I did add 3 strips (layered on one another) 3M microfoam to the dock part that the back of the phone rests on to make it more upright. I've only had my phone since Dec. 1. Love my accessories that I bought with this and no regrets with the pairing of the Ringke smoke case and dock. I went with someone's suggestion here and ordered the DK36 on Amazon and it was cheaper than the DK48 at that time. I am not using either insert with the dock because the phone+case will not fit any one of them. With the Xperia Desk Clock app, got a really expense alarm clock. Enjoy the pics!
the Kosee Case Compatible Charge Dock has been great for me. no fiddling with it also.
I have a ringke fusion case on , and have taken out the plastic drop ins. Now I use the desk charger with out any drop in and it works fine.
Dk48 plus icecream stick
So, finally the operation has finished.
I do not want to force it until tomorrow so will be back tomorow. http://www.imageupload.co.uk/images/2015/02/25/repair.jpg
I got a DK48 charging stand, but none of the inserts worked with the Rinke case, so I 3D Printed one myself to fit exactly. The snaps between insert and base don't work well since it's not real plastic, but it's snug, doesn't move, and makes it fit well... and the magnetic thingie works perfectly fine.
armandov99 said:
I got a DK48 charging stand, but none of the inserts worked with the Rinke case, so I 3D Printed one myself to fit exactly. The snaps between insert and base don't work well since it's not real plastic, but it's snug, doesn't move, and makes it fit well... and the magnetic thingie works perfectly fine.
Click to expand...
Click to collapse
Do you have the file posted anywhere?
armandov99 said:
I got a DK48 charging stand, but none of the inserts worked with the Rinke case, so I 3D Printed one myself to fit exactly. The snaps between insert and base don't work well since it's not real plastic, but it's snug, doesn't move, and makes it fit well... and the magnetic thingie works perfectly fine.
Click to expand...
Click to collapse
Wow that's awesome. Yes, do you have the file for printing and we could print it as well. U are genius man…
Hey guys, Yeah, I am attaching the STL file in case anyone else wants to print one. I went through 3 different trial/error fittings, I found this to be the best one. Like I said the small snaps at the bottom will likely break off since the printer materials are usually not as strong as real ABS, but the friction fit seems to have worked well enough to hold mine in. Enjoy.
armandov99 said:
Hey guys, Yeah, I am attaching the STL file in case anyone else wants to print one. I went through 3 different trial/error fittings, I found this to be the best one. Like I said the small snaps at the bottom will likely break off since the printer materials are usually not as strong as real ABS, but the friction fit seems to have worked well enough to hold mine in. Enjoy.
Click to expand...
Click to collapse
U are a star ?! cheers bro!
armandov99 said:
Hey guys, Yeah, I am attaching the STL file in case anyone else wants to print one. I went through 3 different trial/error fittings, I found this to be the best one. Like I said the small snaps at the bottom will likely break off since the printer materials are usually not as strong as real ABS, but the friction fit seems to have worked well enough to hold mine in. Enjoy.
Click to expand...
Click to collapse
That's awesome. Wish I had access to a 3D printer, cause I am running same case, just using DK48 without any insert right now.
Related
Ok, So I got this case a day ago and I decided to write a review because of how impressed I was. (especially for the price). I found this shell case here, and it is pretty cool. (My print is the carbon fiber, and it comes in a few other colors as well.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Case itself:
This is a simple plastic case that clips onto the back of the Xoom. It is simple hard plastic, with the pattern printed on it. I was very impressed by both the fit and the quality of the print on the case. The Print is very detailed, maintaining great shadowing (for dimension) and enough detail to see individual (printed) strands of carbon fiber. The fit is good, it's snug and does not wobble or wiggle. It only protrudes top and bottom, the sides do not wrap all the way around, but instead only cover the first bit of the sides.( Makes it easier to remove for whatever reason and facilitates access to the tricky volume keys.) I was also very surprised at how slim it is on the Xoom, it doesn't add much bulk at all.
Another sign of the quality of this case is the edges of the cut outs, they are all tapered and rounded, with matching print quality, something I wasn't expecting on a sub $20 case.
The Seller and Shipping:
I ordered this on a Sunday and received it on a Wednesday, so the turn around time was great. The package was shipped USPS, so ship times may vary. Also, shipping was either dirt cheap or free (I can't remember).
The Seller also took a couple dollars off my order, (on top of the code "CRAPISGOOD" for XDA members [%10 off]) Which was appreciated.
My Verdict:
If you are looking for a cheap case that is of great quality, this is for you. It comes in many different print options, and is a great shell. Even if you are not, it is probably worth the $20 investment.
can you charge the xoom while its in this case with the motorola stands?
Is it grippy or smooth?
I knead grippage!!
I was going to buy one as well...
Can you tell me if you can still use the docking stations with this installed? I know you can with the silicon case so if this is thin enough I would think it would work as well.
I am also interested in how slippery it is. I have a hard time holding on to my naked Xoom and appreciate the grip the silicon case provides, it is just really ugly IMHO. The carbon fiber hellshell looks really cool.
It is very glossy and slick. As for the charging situation, I don't have a dock so I can't say for sure, but if it works with the silicon case it should work with this its smaller then the silicon one.
Sent from my Xoom the way it should be, rooted and with SD card.
Thanks man! Just ordered mine (front/ back clear). Been looking for a good case, and it looks like you may have found it for me!
chbennett said:
It is very glossy and slick. As for the charging situation, I don't have a dock so I can't say for sure, but if it works with the silicon case it should work with this its smaller then the silicon one.
Sent from my Xoom the way it should be, rooted and with SD card.
Click to expand...
Click to collapse
Not to be rude, but you NEED to check this instead of assuming. Reason I asked was because I bought a similar case off ebay and it would not fit on the dock, hence it was useless.
Kokanee483 said:
Not to be rude, but you NEED to check this instead of assuming. Reason I asked was because I bought a similar case off ebay and it would not fit on the dock, hence it was useless.
Click to expand...
Click to collapse
I don't have a dock, nor do I want one, so my assumption will have to do.
Sent from my Xoom the way it should be, rooted and with SD card.
Had mine on for a few hours now, TOTALLY loving it.
I purchased the clear one, front/back snap on cover and it adds a few mm to it, but to me it feels better holding it now also wish I had it on when it fell off the bed and scratched along our textured walls.... I have super light blue scratches on the top right and bottom left corners now... grrrrr!!!.
I would recommend this case to anyone who wants a little more protection for the device, and can't wait for super cool otterbox cases and the like to come out.
Word of caution though, I put it on with a Zagg front and back screen protector (the damn side strips were a PITA to put on)..... don't do that. It was super difficult to take off lol
As anyone tried this with a docking station? I really want to order the carbon fiber shell, but want to know if it will fit in the docking station with the shell installed first. I know it is not very much money, but it is still enough that I do not want to make the wrong purchase.
Am I blind, or is there no mention of who makes this or who sells it?
It is in the OP, just not very prominant.
http://electroniccrap.com/store/index.php?main_page=product_info&cPath=16_25&products_id=28
I like the look of that shell. I currently have the Skinomi carbon skin. I wonder if this shell would fit with that installed.
Did I see Netflix?
Is that netflix app on your home screen working for streaming videos??
HuckFinn said:
It is in the OP, just not very prominant.
http://electroniccrap.com/store/index.php?main_page=product_info&cPath=16_25&products_id=28
Click to expand...
Click to collapse
oh! It sure is. Thanks for proving me blind. (Sorry OP!)
My Xoom sent this...
sharma06851 said:
Is that netflix app on your home screen working for streaming videos??
Click to expand...
Click to collapse
Thats my project for today
Just got mine
Ordered one of the cases...fits great. Nice feel to the shell. Best of all using the 2nd attachment that came with the speaker dock, I can charge it as well.
The case gives the Xoom a much more polished feel/look to it...very happy with it.
Just got my case. This thing is great. I got the skulls version and I like it alot, only one complainent. The case is pretty smooth, so now its smoother than the stock tablet.
Now if they would only start shipping the pivot-pad, I would be all set!
i have the same case as well.
and for those asking if this would fit the motorola charge/docking port stand yes it will. motorola offers a plastic adapter that you can add to make the xoom fit if it has a case on.
I forgot to add that as well, my standard dock came with a adapter plate. That plate works with this case just perfect.
Does anyone know if the below car mount fits a Samsung note encased in a TPU or nilkin/rock hard case?
I did a measurement of my note in its protective case and found the width is about 85-86mm...so it might be a tight fit, given the maximum width of the arm is 85mm.
Anyone who has bought this mount and has a TPU / Rock / Nilkin case can share his experience would be helpful. Thanks.
EBay link :
Cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110765803244
Sent from my GT-N7000 using xda premium
I have the car mount (its FANTASTIC BTW). the fit is very tight and I do not think you can leave any case on the device. Aside from a snug fit, you need to snap the power clip in, and it only fits if the device is already snuggly fitted into the mount.
http://www.ebay.com/itm/200679520343?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I got this one and it works great, it swivels 360degrees, great price too. And my ac keeps the phone cool
mkoger said:
http://www.ebay.com/itm/200679520343?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I got this one and it works great, it swivels 360degrees, great price too. And my ac keeps the phone cool
Click to expand...
Click to collapse
ive got the same one,(I think, certainly looks the same)
but it only fits the original cover.. doesn't even fit the samsung flip cover.
Sorry bro, I didn't realize you had a slim case on your phone. I don't use one
Good luck!
Found this one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170748666415#ht_500wt_1373
I think I am going to pick it up. It will fit the permanent mount arm I have in my Subaru.
yeahmon said:
Found this one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170748666415#ht_500wt_1373
I think I am going to pick it up. It will fit the permanent mount arm I have in my Subaru.
Click to expand...
Click to collapse
That's the same one I and mkoger have, it is a very good fit for the stock cover but not anything else
I have that one too. Its OK.. You can see my comments on it here: http://forum.xda-developers.com/showthread.php?t=1386908
As I mentioned, I have this case: http://www.amazon.com/elago-Slim-Ca...d=1324256424&sr=1-3-catcorr&tag=5336653508-20 (elago G4 Slim Fit Case for Galaxy Note -Soft Feeling Black)
And I can snap it into the dock fine. A little snug, but not bad. Recommend using both hands to remove.
fards said:
ive got the same one,(I think, certainly looks the same)
but it only fits the original cover.. doesn't even fit the samsung flip cover.
Click to expand...
Click to collapse
Just bought this one too fards. I was hoping it would fit with my silicone case that ive got.
I've just ordered this one from mobilefun:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Normally £14.99 plus del, but is currently on for £9.99 which makes it £12.99 inc delivery.
AdzUK said:
I've just ordered this one from mobilefun:
Normally £14.99 plus del, but is currently on for £9.99 which makes it £12.99 inc delivery.
Click to expand...
Click to collapse
Please give us a small review when you get chance.
I am interested in this mount but there appears to be a lot of unsatisfied user who have problems with it sticking to the dash or the phone sticking to the mount.
I picked up an ILuv car mount at the weekend and it's working great, no wobbles and holds the Note in the flipcase too.
http://www.amazon.com/iLuv-Universa...3?s=electronics&ie=UTF8&qid=1325597147&sr=1-3
Titus A Duxass said:
Please give us a small review when you get chance.
I am interested in this mount but there appears to be a lot of unsatisfied user who have problems with it sticking to the dash or the phone sticking to the mount.
Click to expand...
Click to collapse
I received this today so will give you a mini review tomorrow after I've given it a test run on my drive to work.
I own original Car kit,
it Does NOT fit Galaxy Note with case
BUT
it DOES fit Galaxy Note in original Flip Cover Case
Titus A Duxass said:
Please give us a small review when you get chance.
I am interested in this mount but there appears to be a lot of unsatisfied user who have problems with it sticking to the dash or the phone sticking to the mount.
Click to expand...
Click to collapse
Ok, I got to test this out today.
Firstly, the unit itself is very nice and compact, it does not take up much space at all.
It sticks to the dash extremely well, not only does the bottom part use suction but it is also very sticky. I tried with a fair bit of force to pull it off and it wasn't moving once stuck to the dash.
My Note is in a Nillkin case so is slightly heavier then standard but I placed it on the two little grooves that stick out, and then firmly pushed it back so it stuck in place. I then drove to work (and later back home). The ride is quite bumpy in parts and I deliberately drove quite aggressively in an attempt to make the Note fall out but it didn't budge. I can see the 'stickiness' being lost over time but apparently cleaning it with a wet cloth fixes that so only time will tell I suppose.
So far I am pleased with it.
Cheers for the update.
I've just ordered one from mobilefun.de as they have them at 11,99 yoyos.
Any of you coming from the Streak who purchased the SlipGrip commuter car mount will be interested in knowing the Note will fit into it with a slim case (I'm using the BoxWave).
I mentioned this in an earlier post.
yeahmon said:
Found this one.
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170748666415#ht_500wt_1373
I think I am going to pick it up. It will fit the permanent mount arm I have in my Subaru.
Click to expand...
Click to collapse
I just ordered the same holder. What do you mean by "permanent mount arm?" Can you post a couple of photos?
mkoger said:
http://www.ebay.com/itm/200679520343?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
I got this one and it works great, it swivels 360degrees, great price too. And my ac keeps the phone cool
Click to expand...
Click to collapse
I assume you dont mount your phone in winter
I want something that will hold it in landscape in the centre dash.
So that's basically the middle of the car (centre) and the highest tip (of dboard) but not on the glass. That way viewing is much much better and the holder doesn't leave a circle smudge.
Here's my car:
http://gi179.photobucket.com/groups/w292/HZ85Z050N0/Picture027Small2.jpg
(i want it above the warning lamp button where the multifunction display resides)
Btw, in my city if they see the circle smudge or the holder, they break into your car and look for the gps, which costs me a window to repair and any stolen goods.
EDIT: Posted my review - http://forum.xda-developers.com/showthread.php?t=1582898&page=2
Does anybody here have any experience with these?
I originally planned to buy one for my Incredible but never got around to it. The thing that interests me about these is that they supposedly fit the phone while a case is still on. No pogo charging of course, but not having to take the case off compensates for that in my mind.
Here's their selection for the Galaxy Nexus: http://www.slipgripcarmounts.com/Galaxy-Nexus_c_21957.html
Guess I'll just have to buy one and see then.
if you are using a tpu or any case with a smooth flat back you can check out the clingo mount. thats what im using with the incipio silicrylic works great you dont even see the mount with the phone on and you can use it for your next phone.
It seems like they work well based on the few videos I found. Here's a video of the EVO version, ignore the cheesy music: http://www.youtube.com/watch?v=Tb3a...DvjVQa1PpcFOK-sVRP7Ikki2KBkd2dR1aFq9dFhq7kZs=
Yadao said:
It seems like they work well based on the few videos I found. Here's a video of the EVO version, ignore the cheesy music: http://www.youtube.com/watch?v=Tb3a...DvjVQa1PpcFOK-sVRP7Ikki2KBkd2dR1aFq9dFhq7kZs=
Click to expand...
Click to collapse
I'm interested in the goose neck holder but I'm a bit skeptical on how their "hard rubber or silicone case" version works. If my rubber or silicone case is smaller and thinner than average, is it going to be loose? If my case is large and in-charge is it going to be difficult to remove and put in?
If anyone can provide a review, I'd love to take a good look at it. They look much better and more secure than the Arkon holder I have. The last thing I want though is something loose or hard to put in.
I'll probably be buying one of the "for Hard Rubber or Silicone Case" ones and will be using it with a Cruzerlite A2 case. I'll post a review when I do.
Yadao said:
I'll probably be buying one of the "for Hard Rubber or Silicone Case" ones and will be using it with a Cruzerlite A2 case. I'll post a review when I do.
Click to expand...
Click to collapse
Awesome. I'll be waiting for that.
Broke down and ordered (gooseneck). I'll give an ETA if they send me a tracking number. Based on reviews of the same mount for other phones, it should be decent.
I bought the proclip air vent mount for my nexus! Its awesome! Well worth the price I paid!
Sent from my Galaxy Nexus using XDA
They look good to me. If I wasn't in the process of doing the touchstone mod & hanging one of those in my car I would probably do this.
It'll probably be here early next week. Expect some pics and my thoughts.
The mount was delivered today.
My first impression is positive. It feels nice and solid.
The suction cup is large and very strong. I tried pulling it off and it didn't budge. I'll have to see how it holds up with extended use.
The goose neck is very sturdy and takes a bit of force to adjust which is good. It means it won't go moving on it's own.
The phone holder fits my Nexus nicely with either my Cruzerlite A2 or Diztronic TPU cases on the phone. The clip holds the phone snugly enough to securely hold it but not so tight that it's hard to remove. There are cut outs for the camera and the speaker on the back (pic below). Where it connects to the goose neck, there is a ball/socket type adjustment which allows it to tilt in all directions.
There's a small flaw in the design near the headphone jack. It's not cut out quite deep enough (can be seen in last pic). I'm sure this could be easily fixed by using a round file to deepen the cutout to where it should to be. This isn't a problem in my case, as I connect to my radio via Bluetooth, but it's something to consider if you need access to it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The camera is unobstructed by the holder. The suction cup easily gets in the way, but the goose neck can be adjusted to avoid it. This is useful for recording video and time-lapses.
The mount is handy for using the Torque OBD scanner app safely in addition to GPS navigation.
The too shallow head phone jack cut out.
Overall, this is a good mount for the money. Especially if you want the ability to leave your case on. The shipping was very fast from SlipGrip and they offer a variety of other mounting options.
Pros: Fits phone with a case ON, camera cut out, nice suction cup, sturdy goose neck, universal fit.
Cons: Improper cutout for head phone jack.
Ordered some NFC stickers. Gonna put one in the dock and see how it works.
What BT OBD reader are you using?
Sent from my Galaxy Nexus using XDA
cingkrab said:
What BT OBD reader are you using?
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B006MPZ9VC/ref=oh_o04_s00_i00_details
just saw this on my google reader
check this usb power dock pro flex
i wonder if this would fit with my nexus with the defender case if not with the defender case I planned to get this is pretty soon, rearth or the androidified tpu case
They make one fitted for the Defender case. http://www.slipgripcarmounts.com/Using-Defender-Case_c_21961.html
Yadao said:
They make one fitted for the Defender case. http://www.slipgripcarmounts.com/Using-Defender-Case_c_21961.html
Click to expand...
Click to collapse
i did see that but then i saw the one that has the a/c power built in im like ZOMGZ i want that. UGH cant decide
any update on a good car mount for the nexus I know have a rearth case on my Verizon nexus
This is a magnetic phone holder. Ive ordered two of these and will post pics/video when they arrive. Looks like a great product.
I also talked to John from the company and suggested they build in qi charging capabilities!
This is on sale for $19.99 and free shipping.
http://www.amazon.com/iMagnet-Magne...e=UTF8&qid=1351802153&sr=8-1&keywords=Imagnet
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The mount showed up yesterday and is awesome!
I will post a video as soon as i have time. Its still very busy at work from Hurricane Sandy!
I am using this with my UAG case and it works great. NFC works too. Qi test to follow when i get my receiver from China.
There is a small metal disc that sits between your case and phone. Its round and smaller than a half dollar. Thickness is very thin. Its just a hair more than 4 sheets of copier paper. Its much thinner than i thought it would be.
There are also two additional metal discs that have 3m tape on them you can use for other devices. These are the same thickness but are retecangular. Im guessing they are about 2" x 2.5".
The mount has a super sticky suction cup on the bottom. On top where you place your phone, it is soft and flat. This top piece has a ball mount on it so you can swivel it.
See pic below showing the trimmed down rectangular one to fit in the groove of my uag case.
This is a steal at $19.99! Order now before the sale is over!
Update with short video on cinder block wall! Show me another mount that works like this!!!!
http://www.youtube.com/watch?v=7831O59lbD8&feature=em-share_video_user
This is very nice, I wonder if I can slip that metal between my hyperion batt and seidio cover, not sure if there is enough room.
Its pretty thin. I was able to slip it in between my blackberry cover and battery. I cut it with a good pair of electrician scissors. It's like a thin piece of sheetmetal and is flexible. Try 5 sheets of cut paper, not folded. If that works, you wont have a problem cause its a little thinner than 5 sheets.
Thanks I will def try it and get it if it fits, thx again
just a caution depending on how you place etc.. this may break NFC
nerys71 said:
just a caution depending on how you place etc.. this may break NFC
Click to expand...
Click to collapse
I am using one with hyperion battery, the round metal sheet fits between the door and the battery, but yes it breaks my nfc, no big deal i don't use it anyway.
How well does this hold up with bumpy roads, I live in Michigan pot hole season is coming also does the charge cord drag the phone down. It looks really cool.
If you put the disc right over the battery, it will hinder nfc. If you move it down a little, nfc works as normal.
Bumps have no effect. I used it in my work van all day today and it never fell off. Also, the cord does not drag it down or spin it in horizontal mode.
Awesome thanks for the reply
dumb question i know, but how does this affect the phone? I mean with such a strong magnet. I know the old "dumb" phones don't always play nice with magnets but what about the newer phones
The magnet is in the mount. The piece in the phone is metal. I havent noticed any problems so far.
How does this affect the compass while driving?
black7 said:
How does this affect the compass while driving?
Click to expand...
Click to collapse
well, it depends on what you mean by "compass". while using navigation, it doesn't at all (because that is dictated by your movement.) IF you are using the magnetic compass in the phone.. you are always going south. even Ulysses speedometer reads fine (my favorite "car mode" app.)
I just bought the iOttie. Haven't received it yet, but it got TONS of great reviews. Amazon. Check it out on YouTube.
(⊙＿⊙)
I had an iottie universal mount (not the one touch) that lasted a week. The suction cup part broke and the suction cup came detached. It was flimsy junk.
Having used both, there is no comparison. The iotte (even the one touch) has a basic clear 25 cent suction cup on it. The imagnet one is super sticky black material. I just dont see an advantage to a clamping style mount versus a magnetic. There is no way i could EVER use a clamp style mount again!
The imagnet suction cup has a patent!
Updated 2nd post with short video.
I have found that the iMagnet stand works quite well with the magnets from the Touchstone mod. I also bought a Khomo rubberized back plate to increase the friction so it doesn't slide. It doesn't work particularly well with a case but is pretty stable otherwise. I've driven around for a couple of days now and my phone hasn't budged. My grand plan is to affix an NFC chip to the iMagnet so that I can just set my phone on it and all of my settings will revert to car mode.
Paradisimo said:
I have found that the iMagnet stand works quite well with the magnets from the Touchstone mod. I also bought a Khomo rubberized back plate to increase the friction so it doesn't slide. It doesn't work particularly well with a case but is pretty stable otherwise. I've driven around for a couple of days now and my phone hasn't budged. My grand plan is to affix an NFC chip to the iMagnet so that I can just set my phone on it and all of my settings will revert to car mode.
Click to expand...
Click to collapse
Let us know when you do. I would like to know if there is NFC interference with the magnet and/or metal plate.
That is what is holding me off from buying one of these mounts.
orntar said:
Let us know when you do. I would like to know if there is NFC interference with the magnet and/or metal plate.
That is what is holding me off from buying one of these mounts.
Click to expand...
Click to collapse
Nfc is not an issue with the metal plate. I will try the magnets later tonight but im guessing it wont be a problem as noted in the touchstone threads.
Case wise, it works great with the round metal plate in both the uag case and incipio silicrylic case.
orntar said:
Let us know when you do. I would like to know if there is NFC interference with the magnet and/or metal plate.
That is what is holding me off from buying one of these mounts.
Click to expand...
Click to collapse
I don't believe that the NFC should be a problem. I have tried NFC with my Nexus 7 and the Touchstone mod doesn't affect it. Since the NFC chip will sit above the iMagnet base it shouldn't interfere. I think the key is keeping the metal plate/magnets in the bottom half of the phone since the NFC is located at the top of the battery. Once I get everything rigged I will try to upload pictures to better explain.
Also just to be clear I am not using the metal plate from the iMagnet kit and am only relying on the magnets from the Touchstone mod to hold it to the iMagnet base.
Gel case - just popped up on Amazon - http://www.amazon.com/Xperia-Compac...615&sr=8-32&keywords="xperia+z3+compact"+case
Nillkin case (I generally love the textured feel of Nillkin) - http://www.amazon.com/IVSO-Compact-...718&sr=8-36&keywords="xperia+z3+compact"+case
Would be nice if possible to note if any cases listed here fit the Sony dock DK48 ok.
techguyone said:
Would be nice if possible to note if any cases listed here fit the Sony dock DK48 ok.
Click to expand...
Click to collapse
Case-Mate has a tough case available soon that seems to compatible with the dock. Only downside is they didn't cover the charging-flap. Wich make it look weird and a lot of the side unprotected.
https://www.knaldeals.com/producten...te-tough-sony-xperia-z3-compact-black-1036225
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I made a request if there will be other docking-acceptable models and another tough-model that covers the flaps.
That would be ok if the uncovered flap bit, matched the bottom half, the magnetic charging is definitely accessible.
techguyone said:
Would be nice if possible to note if any cases listed here fit the Sony dock DK48 ok.
Click to expand...
Click to collapse
The official Sony smart window view case will work with the dock when the front of the case is folded to the back. This is what I intend to buy.
Just received a batch of these (10 for $16) from a seller on aliexpress. They're from the same factory as the 'terrapin' cases made for the Z1C.
Very light plastic with rubber finish and holes in all the right places This was my fave case for the Z1C so glad they're making them for our new baby. Gonna keep a couple and the rest are going on fleabay :good:
Now I just need a phone to put inside it
SteveYorks said:
The official Sony smart window view case will work with the dock when the front of the case is folded to the back. This is what I intend to buy.
Click to expand...
Click to collapse
From the pictures I've seen of the smart window covers, they have a cut out for the magnetic charging, you won't even need to fold it open to charge it in the dock.
I've managed to only find one video yet of the thing in action including, how you attach it. Sadly it's in Italian but you get the gist from the video.
It looks like the inside of the cover that attaches to the back of the phone is some sort of sticky? plastic that attaches to the glass back, rather than the usual plastic type tray that clips on, this does make it more form fitting, I don't know how secure or long lived it would be though. Take a look and see for yourself. (This is for the Z3 but the Z3c also has a version which will be the same, just smaller)
https://www.youtube.com/watch?v=8jGEZMX43G0
cyphomatic said:
Case-Mate has a tough case available soon that seems to compatible with the dock. Only downside is they didn't cover the charging-flap. Wich make it look weird and a lot of the side unprotected.
Click to expand...
Click to collapse
That's annoying. They've gone from one extreme to the other. I suspect a lot of people with the CM Tough for the Z1C, like myself, ended up cutting a gap for the magnetic charger.
TBH that's the only port I really need access to. I very rarely connect the device by USB and the SD and SIM both go in the phone when I get it and come out when I sell it.
Here's hoping for some well designed tough cases.
techguyone said:
From the pictures I've seen of the smart window covers, they have a cut out for the magnetic charging, you won't even need to fold it open to charge it in the dock.
Click to expand...
Click to collapse
Yes, that makes more sense. I was going by the description given here - http://www.clove.co.uk/sony-xperia-z3-compact-scr26-style-up-cover
But now I've seen a description of the charger dock and it says the pins are compatible with our without a case, and the window case seems to be very thin material anyway.
geronimoid said:
Just received a batch of these (10 for $16) from a seller on aliexpress. They're from the same factory as the 'terrapin' cases made for the Z1C.
Very light plastic with rubber finish and holes in all the right places This was my fave case for the Z1C so glad they're making them for our new baby. Gonna keep a couple and the rest are going on fleabay :good:
Now I just need a phone to put inside it
Click to expand...
Click to collapse
Have a link to your eBay listing? I wouldn't mind to get one of these. Obviously don't need 10 though.
showstopper03 said:
Have a link to your eBay listing? I wouldn't mind to get one of these. Obviously don't need 10 though.
Click to expand...
Click to collapse
I see you're in the USofA. Considering the postage from my part of the world, you'd be better off ordering straight from here :good:
Anyone know where to get a Crystal case/clear hard case in reasonable time?
why would you guys cover this beauty with some ugly dress?. I like it naked
coolmalayalee said:
why would you guys cover this beauty with some ugly dress?. I like it naked
Click to expand...
Click to collapse
When your beauty gets a scratch or breaks don't blame Sony then but yourself..
Case Mate barely there is out:
https://www.gadgetwear.co.uk/case-m...r-sony-xperia-z3-compact-black?filter_name=z3
Seems dock-compatible!
But: same unprotected side as the tough edition.
Already a report on a shattered screen from a drop:
http://www.youtube.com/watch?v=TIFgcCoWEZs
So casing seems the way to go. Already preordered the CM tough for convenience until another good case pops up.
cyphomatic said:
Case Mate barely there is out:
https://www.gadgetwear.co.uk/case-m...r-sony-xperia-z3-compact-black?filter_name=z3
Seems dock-compatible!
But: same unprotected side as the tough edition.
Already a report on a shattered screen from a drop:
http://www.youtube.com/watch?v=TIFgcCoWEZs
So casing seems the way to go. Already preordered the CM tough for convenience until another good case pops up.
Click to expand...
Click to collapse
Hopefully that guy will get a case next time. They are made for a reason.
Dsteppa; said:
When your beauty gets a scratch or breaks don't blame Sony then but yourself..
Click to expand...
Click to collapse
Hey.. was just kidding.. I will certainly have a cover for this phone considering that this is a phone I intend to use for at least the next 2-3 years. Been using my GS-II for the past three years with a cover and is still looking pretty good all because of the cover. But that said, seeing this beauty without the cover is a treat it in itself
Really waiting to see the official style cover from Sony for this phone similar to the one for Z3.
Received a hard shell case from eBay this morning, will protect sides but not much protection top and bottom, nice and thin. £1.95 on eBay delivered. I'll post some photos when I get the phone, maybe tomorrow.
I must admit, after seeing the video, and not having a glass phone before, I'll be looking for something that's probably Gel for bounce, non flip & definitely with a cut-out for docking port only. I've had a good look on Amazon/Ebay etc. but it's too early to tell as the phones not actually out yet. Hopefully the clove case will do for the interim until the pictures a bit clearer and thee's some user reviews on the various options. Definitely needs a case of some sort though that's beyond doubt.