http://www.reddit.com/r/moto360/comments/2la6cg/noticed_i_can_get_my_moto_360_to_last_24_days/
A rudamentary discussion is over at the link above about an idea a couple of us have. The short of it is that with the ability to build profiles from an app on your phone, you could disable notifications/bluetooth (on the phone)/ ambient/ etc and that has been shown to dramatically improve battery life ( up to 3 days ). I'm curious if a developer with a Wear device would entertain the idea of putting something like this together. I would be happy to pay for an application that could make these types of adjustments through definable profiles, and I suspect many others would as well.
Thoughts? Suggestions?
Quick update. Battery life on the watch is improved by ~40% in a controlled test by disabling bluetooth on the paired phone. More details on the thread at Reddit.
Wtf is the point of disabling Bluetooth on the phone? The watch can't do what it's supposed to do then?
Sent from my HTC One using Tapatalk
I don't think that can be accurate. I've found that my watch has much worse battery life when not paired, as it is constantly searching for a bluetooth device to pair with... Maybe they mean airplane mode. But if that's the case, the watch is barely more featured than any normal old watch....
As discussed in the thread @ Reddit, the idea is that we're often in a situation where you don't need the watch. If I'm sitting at my desk, I have Chrome open, have my phone in front of me on a dock, etc. Using the watch is cumbersome if I already have my hands on a keyboard and mouse. Therefore, draining 7-12% per hour is a waste. If you consider that many of us are in a position for 6-8 hours a day where the watch will not be used, and the lifespan of the watch is anywhere from 12-18 hours, than turning off bluetooth can mean your watch may last longer than 24 hours and be more effective when you do require it.
This may not apply to you. But it will for many.
As for its effectiveness, I've done it two days in a row now. Using Wear Battery Stats, the results are consistently 40%+ reduction in battery discharge.
so what would be the conditions for matching the profile? meetings? GPS location? times of day?
also, you'd have to have an app present on the watch itself to make this functional, which would limit you to solely duration of time. so technically you'd be limited to the appointments on your calendar - but if you're in airplane mode, is this even possible?
i think the phone could issue a command to the watch to go to airplane mode, but how to get it back out is a bit more complicated. time is the only factor that i can think of. if you move locations, leave your desk, etc., you'd have to manually set it out of airplane, which is not something that interests me.
i'm still waiting for the ability to turn off teh motion sensor.
I just did a logical cheap DIY. (it does not put a stress in the battery)
I put my charger dock to my TIMER wall plug.
I wake up everyday at 05:45. When I go to sleep I have about 25% battery life, I put the watch on my dock and do not charge it.
At 04:00 my wall charger turns automatically ON and starts charging my watch, When I wake up it's 100% . Moto 360 did NOT charge all night, and it goes from about 10% - 20% (witch is almost best ) to 100%.
cvenk said:
I just did a logical cheap DIY. (it does not put a stress in the battery)
I put my charger dock to my TIMER wall plug.
I wake up everyday at 05:45. When I go to sleep I have about 25% battery life, I put the watch on my dock and do not charge it.
At 04:00 my wall charger turns automatically ON and starts charging my watch, When I wake up it's 100% . Moto 360 did NOT charge all night, and it goes from about 10% - 20% (witch is almost best ) to 100%.
Click to expand...
Click to collapse
1. not sure how this relates to the OP.
2. isn't the battery "sweet spot" 80-40%? theoretically reducing the battery to 10% puts more wear on the battery than charging overnight? what if you switched your timer to charge first, then disable?
Yes. What I'm envisioning at bare minimum would be:
- An application on the smart watch that can disable bluetooth locally. That way you can keep it on the phone for your car stereo, headphone, etc features. This could be used through Google Voice (Tap screen and say "Open Sleep Now" or whatever). Also have the ability to open from any standard launcher such as "Wear Mini Launcher" or a Swipe command so you can quickly enable it when you sit down at your desk.
- The application on the smart watch includes the ability to force dim the screen or show a black screen like Slumber until you press/hold the button or press the screen to wake it.
- The application on the smart watch would have a feature to keep bluetooth turned off/screen turned off until the watch detects feedback from the accelerometer that there is significant and consistent movement over X period of time. This would help some people configure it not to go off while at their desk but while walking around the office/home/etc.
A more advanced version could offer additional features from the smartphone such as location awareness based on Wifi/GPS, but my understanding is that such a feature would burn through the smartphone battery. If not, then the ability to disable bluetooth on the smartphone based on location or detection of wifi APs would be another way to approach this. However, I believe that many people would find the first few feature recommendations above beneficial enough.
i hadn't considered the accelerometer but i think it will be tricky to get it right. i feel like the watch would be turning off/on the BT a LOT. sorry to sound so pessimistic - i think some test cases are warranted here.
your last point i just don't see feasible given the limitations of the watch. sacrifice the phone battery for the watch battery doesn't sound like an ideal situation and I'm not convinced it would be effective at reducing battery usage on the watch either.
640k said:
i hadn't considered the accelerometer but i think it will be tricky to get it right. i feel like the watch would be turning off/on the BT a LOT. sorry to sound so pessimistic - i think some test cases are warranted here.
your last point i just don't see feasible given the limitations of the watch. sacrifice the phone battery for the watch battery doesn't sound like an ideal situation and I'm not convinced it would be effective at reducing battery usage on the watch either.
Click to expand...
Click to collapse
Agreed. Again, at bare minimum, if I had a bluetooth/wireless toggle switch on the smartwatch, that would be a huge benefit. I could turn it off while driving and sitting at my desk.
Also, as discussed on reddit, it does not only apply to bluetooth on and off. With profiles, you can turn off HR monitor, step counter, etc when you're seated at the office and just turn it back on when you leave. It can also be scheduled (if you leave office at 5pm, start the profile that enables most services by 4:30pm).
For me, the 8 hours a day that I work, I don't need email or social apps notifying me on my watch since I have a computer in front of me the whole time. I also don't need the HR triggering every so often. At the bare minimum, I just need calendar reminders and SMS via hangouts. If there is a way to set "Office" profile scheduled every 9am to 5pm then revert back to the default profile outside of those times, it would be great.
Related
Im trying to find out what is draining the battery on my EVO EVEN WHEN THE PHONE IS WITH THE SCREEN OFF and SUPPOSED to be in STAND BY MODE (using the power button on the phone). I have SETCPU installed to LOWER the CPU to 245/384 when the screen is off.. HOWEVER THE BATTERY SEEMS TO DRAIN .
This afternoon I charged he batter till the green light came on. Made one phone call for 10 minutes and then later another one for 10 minutes.. I do have GPS and BLUETOOTH ALWAYS turned on since I use them all the time WHEN the phone is on for various APPS and my bluetooth earpiece and car adaptor... After those 2 calls the phone is down to almost 70% from 100%...
I have SYSTEM PANEL and also JUICEPOLTTER, SPARE PARTS and MINIFREEMANAGER installed and the programs are set according to what I have been reading on here...
SPARE PARTS tells me the phone has be MORE THAN ONE DAY with sleeping and the most used app is ANDROID SYSTEM. I look at SYSTEMPANEL and UNDER MONITOR HISTORY I can see that even when there is NO DEVICE USAGE, I still have around 15-30% CPU Usage (is this normal?). I also have it set to get email etc automatically.. some every 2 hours and some software every 4-6 hours.
What could be causing the battery drain? What is the best program to use to see the cause?
Im also not 100% sure SETCPU is using the screen off profile.. HOW an I tell this??? Any help would be appeciated...
Have you tried turning GPS off? If it's not actually being used, it won't drain the battery much or at all. However, if you're actually using it, it will.
If you're using navigation, that's a big battery killer, as it does constant GPS + a large amount of data transfer.
One thing you can try is to open Spare Parts, then go to Battery History and choose "Partial wake usage" in the top box. Things with partial wake locks are generally the biggest idle battery users.
Noxious Ninja said:
Have you tried turning GPS off? If it's not actually being used, it won't drain the battery much or at all. However, if you're actually using it, it will.
If you're using navigation, that's a big battery killer, as it does constant GPS + a large amount of data transfer.
One thing you can try is to open Spare Parts, then go to Battery History and choose "Partial wake usage" in the top box. Things with partial wake locks are generally the biggest idle battery users.
Click to expand...
Click to collapse
In partial WAKEUP uage... I see the following:
MAIL
UID 10018
WUNDEREADIO
MEDIA
VOICEMAIL
DIALER
FACEBOOK
that is the orde they are in and I set it to TOTAL SINCE BOOT.
And to answer your question about the GPS.. the only time I use the GPS is to get the correct weather for when I am, YELP and when I am in the car (and PLUGGED IN TO THE CAR MOUNT), GOOGLE NAVIGATION.
I also just Installed a BRIGHTNESS WIDGET and turned off auto-brightness. the widget I am using has 8 brightness settings and double click for auto. I am using currently on the second brightness setting on the widget (it shows little ticks). I am told lowering the brightness from auto will help...
I read in another forum that there was a bug in the Facebook application that was causing the application to refresh its information several times an hour instead of once in a while at specific times.It would use power and bandwith when the phone is even in sleep mode with screen off. They also mentioned that there was a fix already issued for this. I cannot find the link any more to source it for you where I read this.
My stock EVO runs for days with the radios turned off until I need them.
Sometimes, if it ain't broke ...
My evo has been draining fast without all that on and well it's annoying. The only compensation I have is owning 3 batteries.
Sent from HTC EVO 4G via xda app
I haven't seen that Facebook issue. One other thing. In spare parts I have activity management set to aggressive. Could that effect battery life or does that help battery life. I also notice in spare parts that I See programs that I don't use ruining that I didn't see before.
Sent from my EVO4G using Tapatalk.
dahauss said:
In partial WAKEUP uage... I see the following:
MAIL
UID 10018
WUNDEREADIO
MEDIA
VOICEMAIL
DIALER
FACEBOOK
that is the orde they are in and I set it to TOTAL SINCE BOOT.
And to answer your question about the GPS.. the only time I use the GPS is to get the correct weather for when I am, YELP and when I am in the car (and PLUGGED IN TO THE CAR MOUNT), GOOGLE NAVIGATION.
I also just Installed a BRIGHTNESS WIDGET and turned off auto-brightness. the widget I am using has 8 brightness settings and double click for auto. I am using currently on the second brightness setting on the widget (it shows little ticks). I am told lowering the brightness from auto will help...
Click to expand...
Click to collapse
From your list I can only see two things I would kill these programs and wait and see what happens.
WUNDEREADIO
FACEBOOK
Everything else must run. For me Slacker radio kept my EVO on all day long eventhough I was not using it. The new version seems to fix that issue. I am guessing your problem is WUNDEREADIO. I would reboot (resets your battery information) kill Wundereadio. Then go to Settings, About, Battery and monitor your Awake Time vs Up Time. Write down the numbers. Turn off your phone and wait 10 minutes. You should see a gap in time. If so then it is Wundereadio.
Good luck
I think slacker and wunderradio were in the list because I just used them.. wunderradio inst in the list today.. BUT SLACKER is but not in the partial wake.. its in background ...
I changed my backlight setting from auto to using a widget that has 8 brightness settings and it is on the 3rd setting.. I dont know what the AUTO backlight was setting the screen at...
I also adjusted the MINIFREEMANAGER according to some settings I found online..
also I have SPARE PARTS set to AGGRESSIVE... would that have anything to do with it??
Check systempanel first thing when you wake up, but go into monitor, then history, and switch plot to top apps. It will tell you exactly whats been using the battery/cpu when there's been no usage.
As you know, the bt sucks a lot of battery, if you really do use it often, with a bunch of apps, you may want to consider tasker, which can be set up to turn bt on only when your on a call, or using certain apps.
Sent from my blah blah blah blah
Will tasker turn on bluetooth when a call comes in? IE will it let the bluetooth earpiece ring so I can answer it from the bluetooth earpiece?? also can I set tasker so that when get in my car, it will KNOW I am in range of a bluetooth speakerphone and it will turn on BT and connect??
I leave BT on all the time for these reasons....
Looks like tasker wont do anything for me with Bluetooth. The earpieces take too long to connect when a call comes in or I make a call and some even auto answer when they connect which I don't want. I wonder how much battery drain Bluetooth and GPS use if left on but idle?
Sent from my EVO4G using Tapatalk.
Yeah, it would have depended on how long it took to pair. Still try checking the apps through systempanel after a few hours of non-use though. That should help.
And gps doesn't use much until its being used for something, but bt is a constant drain.
Double post
On my old tp2 Bluetooth didn't the battery much. I guess it does on the evo
Sent from my EVO4G using Tapatalk.
OK so I have been running for the past day and 1/2 without blutooth turned on.. I only have 3G and GPS turned on. Still it seems the battery drains faster then it should. I look at SPARE PARTS and it doesnt show anything out of the ordinary on PARTIAL WAKEUP. I have SETCUP to 384/245 when screen off. I do use SYSTEMPANEL to look at what is running and it does show a LOT of stuff such as SLACKER, SOUND HOUND, JUICE PLOTTER, etc... what else can I do for battery life.. I left for work at 8:00 and when I got to work at 8:15, the battery was already at 90% without doing anything....
Aldo how much battery drain does BT take if I leave it on? its a pain to remember to turn it on when I get in the car and turn it off when I leave...
Does anyone know if it' s possible to use the SW3 to control MyTracks (or some other GPS app) on the phone rather than using the integrated GPS in the SW3? I realize that the GPS is one of the main reasons why people choose this watch, but let's say that your watch battery is getting low while your phone has plenty of charge, so you'd rather use your phone's GPS. Of course you could just pull the phone out, but for the sake of argument let's say that it's inconvenient to get to your phone. For example, you're on a hike and it's in your backpack or you're out on the water and it's in a waterproof bag. So you just want to use the watch to control MyTracks on the phone. I guess this is probably not a real common use case, but I was hoping it would be possible.
I did an experiment yesterday to try and find out. I turned Location off in the SW3 settings, and then I opened the MyTracks app on the SW3. Surprisingly, MyTracks started up and let me start recording a new track. The distance traveled was even updating as I walked around. I left it on for a while, and the quick battery drain on the watch seemed to indicate that the SW3 GPS was actually on even though location had been disabled. It makes me wonder what the location on/off setting even does if it doesn't prevent an app from turning on the GPS (anybody know?). However, when I tried to pause or stop recording the track, it wouldn't let me. I would press the pause/stop button, and nothing would happen. MyTracks stayed running and recording, and I couldn't swipe it away. I finally had to just reboot the SW3 to get it to stop. The track that had been recording disappeared and never transferred to my phone. Maybe I'll try it again if I have time in the next few days, but I guess the first experiment wasn't too successful.
There were lots of comments (and still are) about how wifi is a battery killer on android wear. I'm not seeing this to be the case at all, when it's working like it's supposed to.
Since 5.1.1 my battery use has been around 3% and hour with all features on. Turning off bluetooth on my phone, with a 2/3 wifi signal on the watch, I'm seeing 2.5 to 3%.
Quick drain happens when walking around the edge of bluetooth range, as the watch switches back and forth between bluetooth and wifi. It seems that as long as it's not finding bluetooth, battery use is normal at worst for me.
I know that the moto 360 will switch to a state of only checking for updates occasionally to save battery, but I don't see this happening. Notifications are coming to the phone, and shortly afterward on the watch. I have not seen a time when a notification was delayed more than a few seconds.
The downside to wifi-only use: some apps that communicate with a phone app don't work. My watchmaker face doesn't update the phone battery level. Google voice commands fail too often, maybe half of the time.
I think google should change the frequency of attempting to reestablish bluetooth connection while on wifi.
Has anyone else tried this? Either turn off your phone's bluetooth, or make sure it is well out of range.
I'll give it a go tomorrow at the office and report back.
Sent from my Xperia Z3
Thanks to a heads up by DarkRazorZ, I learned wifi can be turned on in airplane mode. Will be looking to see if this makes any more difference.
Watch maker has been my biggest battery drain. It also makes the drop down menu laggy and impossible to use.
Yeah, I had that problem with watchmaker. I use intelligent and it seems to work well. Other people report facet works too.
I concur. Wi-Fi uses a lot less battery than Bluetooth, with an acceptable lag - 1-2 seconds on notifications. Bluetooth seems like a big battery drain on the phone and on the watch.
Sent from my Xperia Z3+
So I found this one app " Swipify" that lets me keep the watch face on full time. I like it but it drains the battery a bit faster then I would like. Also when charging the watch the round charge progress bar does not advance so I have no idea how charged it is until I take it off the dock. So I un-installed it. I am looking for an app that will let me keep the watch in the dimmed "Ambient mode" full time and then when I lift the watch to look at it, have it to the full watch face mode until I set my arm back down.
Anyone make such a add-on app by chance? :fingers-crossed:
Or should I start learning how to code apps?
Any chance they (moto) will update with such features?
Thanks,
-DK
I'm not sure if such an app exists, but I'm just about 100% sure that Motorola will never add this feature. The current 5.1.1 software version was significantly delayed because they were trying to optimize battery life. I think it's a combination of a small battery and an old, power hungry processor that is the main problem.
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
SirDigitalKnight said:
I find that since upgrading to 5.1.1 I can go the entire day on one charge in ambient mode but I have to leave the watch sitting flat in order to test it. But by the end of the day I still have 25-25% charge left with it running the entire day in Ambient mode as long as I do not get to many notifications during the day which of course I can control those with no problem.
Click to expand...
Click to collapse
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
closer reading...
thebobmannh said:
Huh? What's the point of having a watch if the only way you can get it to work is to lie it on the desk and not touch it, oh and to disable notifications, aka the only thing that makes the "watch" something more than juts a watch?
Click to expand...
Click to collapse
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
SirDigitalKnight said:
That is why I am looking for an App similar to Swipify to keep the ambient mode on full time. And I only let it lie flat for a day to test the battery life and it makes it through the day with the screen on full time in ambient mode. So I know the watch is capable of doing what I would want it to use it for.
And I said "as long as I don't get too many notifications", I never said I disabled notifications. I still have those on.
Click to expand...
Click to collapse
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
thebobmannh said:
Gocha. No need to be defensive, sorry for the misunderstanding.
Still seems like you'd always be on the hairy edge of running out of battery in a real-world scenario. Hell, I'm ambient mode off but tilt-to-wake on, and some long days I barely make it to the end of the day. Never had luck with even the fake ambient mode the Moto provides.
Click to expand...
Click to collapse
All good, sorry to come off as defensive. :good::highfive:
Been using it with tilt-to-wake turned off and I am finding that by the end of the day I still have plenty of juice left.
With Ambient on and tilt-to wake off I find I have about 35-40% left at the end of a 7am - 11pm day. That is with receiving some email and text notifications (maybe 15-20) during the day.
I know everyone has different uses and ideas of how to use their Moto 360 so everyone's setting are going to be different, but what I am after is a always on "dimmed" or "ambient" mode with the option to turn on tilt to wake so I could test the battery life both ways. I would also like to use my 360 for home automation control and I I know with "Autowear" it is possible but from the little testing I have done so far it would kill my battery way to fast so perhaps on a future SW that will be something I will be doing.
Pausing and starting Netflix or HBOgo or Plex from my 360 is working pretty good for me as a start.
Think I will try and contact the owner of the Swipify app and see what he can do for me...... :laugh:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
pustefix said:
With the latest update LCA44B, when ambient is on and tilt is off, the screen will stay on all the time. However with ambient on and tilt on, it is same as previous behavior, screen will turn off when you put your arm by your side.
Click to expand...
Click to collapse
That is very good news! Can not wait to try it out!
Hi All,
Great forum, used it a lot with several devices.
So, I just got my Huawei watch and it is great!!
I do have some questions and tips that it will be great if you could help me with and I couldn't find answers to (sorry if its too long...)
1. Charging - what is the best way to charge it in order keep the battery life? like everyday few mins? everyday to full charge? let it drop until X%?
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
3. Reset - do you reset the devise occasionally? like in purpose. I mean, on my Samsung S6 i know that once in a while I need to reset it to get a better performance.
3. Steps tracking - I was with the blue moon face and noticed that the steps showed is updated after few seconds, meaning that let's say I walked 50 steps, I stop, look at the watch, see the old steps count and after 2-3 seconds it is "jumped" and updated to the new count. in addition, if I stop, wait this few seconds and look at the watch, the count is ok - is this normal?
4. fitness app - which app to use with it that will sync the best with my phone? I installed Google fit and its not doing the job good. it looks like it count steps from the phone and not the watch, or mixed it together, In addition the distance and calories count is way not true, like it show the distance far low then the true (I updated my height and weight, over the app and on the watch) and the calories far more then it is.
In addition I installed the Huawei wear app and it looks much more accurate, showing the steps as the watch, and separate it to walking and steps, distance is accurate and calories as well. but the app doesn't look so good and looks like it missed a lot of other option.
In addition, I don't understand why the Huawei app on the watch is not showing distance but just steps count.
So, which app do you use? I basically want a nice app that will show my daily usage and if can, that will sync with the heart rate measure that i can take from time to time.
Can I sync it to S-Health that I have? or please recommend for another app.
5. Is there any nice watch face that shows not only the steps count but the distance as well?
6. Any other general recommendations?
I think that's it for now
Thank you very much for your help.
Neo810 said:
Hi All,
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
Thank you very much for your help.
Click to expand...
Click to collapse
Although the screen should not be harmed if always on is working all the time, at night you can use theater mode to turn your screen off without powering down the watch. The easiest method of going into theater mode is by quickly double pressing the button on the watch. You can also go into the pulldown menu from the main watchface and swipe over to theater mode to do the same thing. This can save some watch battery if you have the watch off the charger all night or if the battery is getting low during the day and you want to squeeze a few more hours out. It is meant for if you're in the movies and don't want the light from the watch screen to distract you or others from the movie. To exit theater mode and turn the screen back on, just single press the button on the watch.
Btw your post may be removed since we aren't supposed to post questions here in the general forum. There is a Q&A forum however where any questions can be asked about the Huawei watch. http://forum.xda-developers.com/huawei-watch/general/notice-post-questions-t3367506/page1
Enjoy your watch!
Neo810 said:
3. Reset - do you reset the devise occasionally? like in purpose. I mean, on my Samsung S6 i know that once in a while I need to reset it to get a better performance.
Click to expand...
Click to collapse
From my experience, it is ok to factory reset your device once every two months or when you feel it has become quite sluggish although you mustn't expect the performance results to be visible right away after the reset. After the reset, all the applications from your phone will be resynced and the Google Play Services will begin to re-download its updates thus resulting in bad battery life and perfomance for that day until it settles down.
Great.
Thanks for helping.
I always charge the watch to 100% and wait until it goes below 10% to charge it.
When I take the watch off my hand I also shut it down and power it on again when I put it on. This gives me about 3 days of using the watch without charging.
Neo810 said:
2. Always on option - is there an option to make it sleep at night? like I like this option very much, but as I don't sleep with it, I think it is better that the screen will be off at night.
in addition, do it harm the screen if always on working all the time?
Click to expand...
Click to collapse
If you put your watch on a desk the display will completely turn off after about 10 minutes, even if you chose always on.
If there is no movement detected for a certain period of time, the display will switch off. This can sometimes also happen if you are in a very steady position. My watch turns occasionally off while I'm playing Playstation and holding the controller in the same position.
foo said:
If you put your watch on a desk the display will completely turn off after about 10 minutes, even if you chose always on.
If there is no movement detected for a certain period of time, the display will switch off. This can sometimes also happen if you are in a very steady position. My watch turns occasionally off while I'm playing Playstation and holding the controller in the same position.
Click to expand...
Click to collapse
I noticed that but as inconsistent.
Sometimes it did it exactly as you describe and sometime not. left it on the desk, half an hour and still always on worked.
I don't know the exact algorithm behind it, but I'm pretty confident that the display will switch off sooner or later. I always put my watch on my desk at night and every morning the display is pitch black.