[Q&A] How to Encrypt your Device - AT&T, Rogers, Bell, Telus Samsung Galaxy S III

The Problem:
I have beat my head against the wall until it was bloody trying to encrypt my phone. Android suggests that all one needs is a fully charged phone, a strong password, and an hour or so available for the seemingly easy task. Unfortunately, as many have discovered, in many cases the green android shows up on the screen for a minute or two and then the phone resets without going through the encryption process. What gives?
It seems that the powers that be at Google are not terribly interested in making it easy for you to encrypt your device. After working on this for well over a month and having tried literally dozens of different “solutions,” I hope I have stumbled upon a solution for nearly everyone.
The Solution:
There appears to be some sort of conflict between third-party applications and the encryption process. As such, you need to specifically turn off SuperSU and prevent third-party apps from loading prior to attempting to encrypt. The following steps SHOULD work for almost everyone. If you don't have SuperSU, skip to step 2.
Turn off SuperSU (Settings -> More -> Application manager -> All -> SuperSU -> Turn Off)
Reboot into Safe Mode (How to)
Run encryption (Settings -> More -> Security -> Encrypt Device)
Turn on SuperSU after complete (Settings -> More - > Application manager -> Turned Off -> SuperSU -> Turn On)
Please pass this around if you see any other similar posts so others will not suffer as I (and probably you) have!

Also, pulser_g2 adapted some scripting to allow a user to use a PIN for the lock screen while keeping a strong password for device decryption. Find that here. When used in conjunction with No Lock Home, device encryption and relatively robust security becomes quite manageable!

Related

[Ref] Galaxy Nexus 4.3 tips & tricks with important info to know

Hello everyone, i see here to collect and post some known and maybe unknown tips and tricks with some important information, hoping this will be useful for users.
Any more tips, tricks and suggestions from users are always welcomed. And please feel free to make corrections for any wrong or missed information in this post
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Preface:​
The Galaxy Nexus (GT-I9250) is a touchscreen Android smartphone developed by a partnership between Google and Samsung. The phone and operating system were developed collaboratively by engineers from both companies. It is the third generation successor to Google's previous flagship phones: the Nexus One and Nexus S. The Galaxy Nexus has a high-definition (1280 × 720) Super AMOLED display with curved glass, an improved camera and has an unlockable bootloader to allow further development and end-user modification. Nexus devices are the first Android devices to receive updates to the operating system. The name of this smartphone is the result of co-branding between the Samsung Galaxy and Google Nexus brands of Android smartphones. The device is known as the Galaxy X in Brazil, however, due to a trademark on the "Nexus" brand.
The Galaxy Nexus was unveiled jointly by Google and Samsung on October 19, 2011 in Hong Kong. It was released in Europe on November 17, 2011.
It is one of the few phones recommended by the Android Open Source Project for building Android from source.
The Galaxy Nexus is no longer available for sale on the Google Play Store as of October 29, 2012 with the announcement of its successor, the LG Nexus 4.
Click to expand...
Click to collapse
OTA 4.3 (JWR66Y)​
Google begins to roll Jelly Bean 4.3 on Gnex which have some notable modifications but not at the level that users expect. Not as usual, OTA begun to roll first on yakju build not takju. Users who already got their hands on the latest firmware update have reported what is new:
- More secured ADB. (as 4.2.2)
- Fix the Bluetooth audio bugs.
- Better battery performance noticed.
- Performance enhancements.
-System UI lag also gone.
-Camera rotation lag is reduced.
-Dial pad autocomplete, can be enabled from call settings.
-you will notice more ram freeing.
-Google Hindi Input is added in "Language and imput".
-supporting of App Ops (optional permissions), see here.
** 4.3 supports now "OpenGL ES 3.0" for High-Performance Graphics and "Connectivity with Bluetooth Smart devices and sensors" and "Optimized Location and Sensor Capabilities", but unfortunately, our devices does not support it.
Support for "Restricted Profiles" is only for Nexus tablets
Did you install Android 4.3 on your Nexus device? Have you noticed anything new in Android 4.3? Please post it.
Click to expand...
Click to collapse
Questions & Answers​
Q1) I didn't receive OTA update and i am on unrooted stock firmware?
A Go to Settings > Apps > All > Google Services Framework, clear data, then go to Settings > About phone > System update > Check now. repeat procedure many times.
Q2) Kies program does not recognize my Gnex, i want to update firmware?
A Gnex firmware is not supported by Samsung Kies. it is updated directly from Google.
Q3) Can i make a screen shot on stock firmware?
A Yes you can! user doesn’t need to root the device or employ third-party apps just to take a photo of what's happening on screen. Taking a screenshot is simple, just press the volume down and power buttons together. The device will quickly take a snapshot of the screen and you will find it in your notifications.
Q4) What is Barrel Roll?
A As part of Google's regular antics, it had introduced a "barrel roll" trick for desktop browsers. Type "do a barrel roll" as a search term, and Google would demonstrate the power of modern browsers by flipping everything around on your screen. Your Android device can also do a barrel roll if you speak out the same command. Again, It's great fun to show off.
Q5) How can i uninstall an app. without going to setting?
A Long-pressing on an app within the app drawer pops up a couple of menus along the top of the screen. App Info gives you the boring technical stuff about how much memory it's taking up, or you can fling it off the other way to uninstall it.
Q6) How can i go directly to the quick settings menu?
A expand notification bar by sliding two fingers.
Q7) What is inverted rendering?
A Inverted rendering is a posh way of saying it makes the pages black and turns the text white, so it looks like you're reading the internet from 1997. It also supposedly saves battery, plus is easier on the eyes if you're reading in the dark. It's under the browser's settings tab, within the accessibility area - and there's a contrast slider, too.
Q8) How can i reboot into safe mode?
A Safe mode, the savior of so many Windows PCs! If you are experiencing a problem with your Gnex and you want to determine whether it is being caused by a third-party app, long-press the power button, then long-press the Power off option. Choose OK to reboot in safe mode, which completely disables all third-party apps on your device. If the problem goes away when you’re in safe mode, you should reboot your device and start removing recently installed apps until the problem goes away.
Q9) What does reset app. preferences means?
A Android gives you loads of different options for each installed app, and on the whole this is a very good thing. Sometimes it can be a bad thing, though: you may find your phone playing up because a crucial app has been disabled, or you've changed the notifications for something important like emails. In the apps drawer, you'll find Reset app preferences under the settings. This resets all your apps on a global level, returning actions and data settings to their original levels.
Q10) What is imojis?
A "Emojis" are the Japanese version of emoticons. You can enable emoji support for the default Jelly Bean keyboard by choosing Language & input in the settings app, then going to the settings for the stock Android keyboard. Here, choose Add-on dictionaries and select Emoji for English words. When you next type certain words (there's a complete list here) you'll see its symbol appear in the predictions bar.
Q11) What is the difference between takju and yakju?
A These android builds are almost the same but there are some differences in terms of their android updates. Takju: Mobiles which brought from Google play store in USA and come with a Google wallet pre-installed. In these devices, android update is pushed by Google itself and they are almost first to receive an OTA update. Yakju: Mobiles which brought from Google store but outside of USA, update are also pushed by Google, but this update might delay by some days or weeks. So, do check your android build if your device is running android build other than takju, then change it in takju build to an OTA update first.
Q12) How do i know what is my Gnex android build?
A Download Android System Info application from play store or you can check it from Maps>setting>about.
Q13) I can not see Developer Options in settings?
A Google hide this option, to enable it just go to settings---->about phone, tap 7 times on "build number" and it will be shown in settings.
Q14) how to make apps, data and sdcard backup & restore?
A Refer to post # 286.
Q15) I received 4.3 OTA update, ADB can not recognize my Gnex. What should I do?
A Download and install Android SDK, if you already have it on your PC just update tools and platform-tools. you must have latest ADB version (1.0.31). If you do not want to install Android SDK, download attached file (thx to xaueious).
Q16) How can i make my Gnex feel snappier?
A By speeding up (or disabling) the animated fade-in effects you see when switching between tasks, you’ll see a boost in performance and faster screen transitions. Start by unhiding “Developer options” as described above. Once in “Developer options,” scroll down to the “Window animation scale” and “Transition animation scale” options and set both to .5x. You can even turn each of these off and transitioning between apps and pages will be almost instant. If you ever want to go back, remember the defaults for both of these settings are 1x.
Q17) How can i improve my gaming graphics?
A If you are a hard-core gamer, you probably already know what 4x anti-aliasing is. First, enable Developer Options as described above, then go to Settings and click on Developer Options and enable Force 4x MSAA. Multisample anti-aliasing (MSAA) is a technique used to improve image quality. Since the Gnex has a GPU capable of supporting MSAA, this setting should make your graphics look more detailed when you are playing advanced games. Keep in mind this will also cause your GPU to work harder and your device may get hotter and consume more power than normal. It’s also possible that all games may not support this.
Q18) I want to see Jelly Bean on my screen, can i?
A Yes you can, go to settings---->about phone tap quickly 4-5 times on android version, you will see a big Jelly bean, touch and hold it, you will see small flying Jelly beans.
Q19) How can i customize my LED notifications?
A A free app called Light Flow Lite allows you to take control of the colors of your notification LED. It also makes your Gnex flash one color after another. This app allows you to set the notification color for over 250 applications and system events including missed calls, low battery, no signal, voice mail, calendar reminders, Gmail messages, email messages, SMS messages, MMS messages, Twitter notifications and more.
Q20) How can i put my Gnex in fastboot/recovery mode?
A Turn off your phone, press and hold down Volume Up and Down keys + Power button at the same time until fastboot (bootloader) mode (image of an Android with Start) appears then release the keys. Press volume up or down and select recovery by pressing power button. (For stock recovery, when you see an android logo with exclamation mark, press power + volume up to see the recovery menu).
Q21) How can i put my Gnex in download mode (odin mode)?
A Turn off your phone, press and hold down Volume down + Power button at the same time until odin mode appears then release the keys.
Q22) Why google voice search is crashing when i press on mic when i am on a custom rom?
A Update google search from play store.
Q23) My Gnex screen is turning on by itself, what is happening?
A It is caused by an application, usually by live wallpapers, try to find it and delete it, or install an antivirus app., i recommend Dr.Web Anti-virus, scan, delete, wipe cache and dalvik (optional).
Q24) sometimes i lose packet data (3G) when i turn it off then on, i turn off then turn on my Gnex to enable packet data again?
A There is no need to turn your phone off and on to re-enable packet data, just long press on power button, enable airplane mode for 3-5 seconds then disable it.
Q25) I rooted my Gnex, what to do next?
A It is recommended to make a nandroid backup immediately.
Q26) I rooted my Gnex 4.3, made a nandroid backup, but i can not find my backup folder?
A Use a file manager, enable root option, your backup folder is located in data/media/clockworkmod or mnt/shell/emulated/clockwordmod.
Q27) The kernel does not support PGM, is there a solution?
A change the kernel, or install intellicover application.
Q28) Do i need to wipe cache partition when flashing a new rom?
A No, there is no need to wipe cache, because when you wipe data/factory reset, cache is wiped automatically. Some said to wipe cache and dalvik after flashing a new rom to prevent any potential conflict.
Q29) I rooted my Gnex 4.3, flash custom recovery, but when i reboot into recovery, it shows the stock recovery!?
A Every OTA update places two files on device system (that are not there on a non-update stock ROM) that re-flash the stock recovery on EVERY boot. The two files are /system/recovery-from-boot.p and /system/etc/install-recovery.sh. You need to make sure that these files are either deleted or renamed, or else custom recovery will disappear when you reboot. These files serve no purpose other than re-flashing the stock recovery on every boot. So, by using something like Root Explorer, delete or rename them, and re-flash your custom recovery.
Q30) My Gnex won't start, i can not get into fastboot mode, only i can get into download mode?
A Use odin to flash stock firmware here.
Q31) What is the easiest way to install samsung driver?
A The easiest way is to install Samsung Kies.
Q32) How can i flash stock image on my Gnex?
A See efrant thread.
Q33) What about governors, I/O schedulers.....?
A See droidphile thread.
Q34) How to properly post a kernel bug (LAST_KMSG)?
A See ciprianruse88 thread.
Q35) What is the best kernel for my Gnex?
A There is no something called "best kernel". You must try many kernels and decide what suit your rom and your need.
Click to expand...
Click to collapse
Rooting:​
Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user. Rooting is similar to jailbreaking devices running the Apple iOS operating system. On Android, rooting can also facilitate the complete removal and replacement of the device's operating system, usually with a more recent release of its current operating system. Rooting enables all the user-installed applications to run privileged commands that are typically unavailable to the devices in their stock configuration.
Legality: The Free Software Foundation Europe argues that it is legal to root or flash any device. According to the European Directive 1999/44/CE, replacing the original operating system with another does not void the statutory warranty that covers the hardware of the device for two years unless the seller can prove that the modification caused the defect.
On July 26, 2010, the United States announced a new exemption making it officially legal to root a device and run unauthorized third-party applications, as well as the ability to unlock any cell phone for use on multiple carriers.
Safety: I Have always said that the person should learn the Android OS before rooting. It is a good idea to have an idea of what rooting is doing and what it will affect. I would say spend your time really learning the OS which is not a small task. Then, if you still feel like it, go ahead and root. While rooting can help you learn many things about your device, it also can reap very bad consequences, such as:
-Bricking your phone (or in an easier way to explain, making your phone a pretty paper weight).
-Corrupting core files.
-Stopping OTA updates from going to your phone.
-Voiding phone warranty.
-Have your phone open to malicious software and applications that can do serious harm to your phone.
As you can see, it can reap very negative things. I have read/seen people who have literally had to buy brand new phones because they tried the latest and greatest rom. Rooting is essentially something that you must take at your own risk & caution. Generally, if you follow exactly the procedure of rooting made by developers, you will be more likely on the safe side.
Root process: See jabakuba thread.
What to do after rooting?: 1) make a nandroid backup via custom recovery 2) backup efs partition (save your IMEI and NV_DATA):
Install "terminal emulator" from play store, open it and type the following (enter after each line):
Code:
su
dd if=/dev/block/mmcblk0p3 of=/sdcard/efs.img
Then move efs.img to a safe place on your pc.
Click to expand...
Click to collapse
Problems can happen:​
-Stuck into a Bootloop: Bootloops are mainly caused by system files interfering with each others which cause instability and/or crash at the boot sequence. so what to do??
Pull out battery then reinsert it, boot into recovery, wipe cache and dalvik, reboot. If not, format data, system, cache using recovery and restore stock firmware (supposing that you did a nandroid backup before). if you don't have a backup to restore, flash any custom rom from your sdcard after formatting system & data & cache. If you don't have a custom rom in your sdcard, push one from your pc using adb (supposed that you have adb file or sdk on your pc): boot into recovery, connect your phone to the computer open command prompt and write the following command then hit enter (supposing that your rom is placed on D):
Code:
adb push D:\name of rom.zip /data/media/
Or
Code:
adb push D:\name of rom.zip /sdcard/
Then
Code:
adb reboot recovery
once done, go to your phone and install the rom.zip from recovery, reboot.
If none of above methods works, then flash stock image for your Gnex using fastboot commands here.
-Phone-Triangle-computer: If your phone can not boot, can not boot in fastboot or download modes, maybe after a bad flash, and screen shows phone--triangle--computer pic, so it is sort of download mode, use odin to flash stock firmware using this tutorial.
-Nexus is quietly dead: If your phone did not respond to anything, it won't turn on, can not boot into fastboot or download mode, black screen, try "OMAP FLASH", it can save your Gnex.
For 4.2.2 only:
-AOSP Rom incompatibility: After supplying all needed hardware drivers by AOSP, developers has updated AOSPA. So you absolutely need to be up to date regarding Google Bootloaders and Radios, which are not part of the Rom. Or else your device will be incompatible, unable to make calls perhaps and maybe other issues.
Regarding Bootloader, it still the same build for 4.2.2 (primelc03) but the Radio has changed to xxlj1. So you must flash Radio to the latest build using "Fastboot" or through "Recovery":
Fastboot method:(I prefer this)
Unzip "fastboot-radio-maguro-i9250xxlj1.img.zip" (attached), put unzipped image (in the file) into fastboot folder (attached), enable "usb debugging" option, boot into fastboot mode, connect your device to your PC, open a command prompt into fastboot folder and type:
Code:
fastboot flash radio radio-maguro-i9250xxlj1.img
Hit "enter"
Code:
fastboot reboot-bootloader
Hit "enter"
Code:
fastboot reboot
Hit "enter
Recovery method:
Put "cwm-radio-maguro-i9250xxlj1.zip" (attached) into your sdcard. Boot into recovery and flash the zip file.
Click to expand...
Click to collapse
Battery Conservation Tips:​
-Enable Auto Brightness: Brightness can lure a lot of battery if not changed intelligently with time to match the surroundings, Jellybean in this case brought the “Auto Brightness” function which uses the accelerometer within the device to detect the amount of light in the surroundings and then act upon the brightness level according to it. To enable, go to Settings > Device > Display > Brightness, and tick “Automatic Brightness“. And if you want to save more battery drain, set brightness manually at low level depending on the external amount of light.
-Remove Live Wallpapers: Using a live wallpaper is another battery sucking feature. If you turn out to be truly saving battery, make sure not to use any live wallpaper. A wallpaper with a black background uses less power than a wallpaper with a light-colored background.
-Disable Location and GPS services: Keeping GPS ON at all times, decreases your battery life, so its better to disable it while not in use. To disable, go to Settings > Personal > Location access > and switch it off.
-Disable Wi-Fi or Mobile Data when not in use: Try to avoid situations when you keep your Wifi or Mobile Data ON even when the phone is set in standby.
-Manage Sync carefully: Keeping the Sync ON all the time is another reason for decreased battery life. Enable it anytime you want, manage your emails or services and again turn it off. For those who are on work and want real-time push notifications are advised not to follow this tip.
-Turn OFF Haptic Feedback and screen sounds: To save a little more on battery, its better to switch off the screen touch sounds and vibrations. To do so, go to Settings > Device > Sound and untick Dial pad touch tones, Touch sounds. Screen lock sound and Vibrate on touch.
-Turn OFF bluetooth and NFC: Disabling bluetooth and NFC when you are not using it, is another way to save battery juice.
-Follow the method of full charge and full discharge: Don’t put your phone on charging when there is the battery remaining it for another few hours unless it’s very important. Charge it when your battery is about to get totally discharged and when you put it for charging, let it get charged totally.
-Set sleep time: Check the Sleep setting (under Display) and make sure it is set to 1 minute or less.
Keep calls short: This is obvious, but how many times have you heard people on their mobile phone say, "I think my battery’s dying," and then continue their conversation for several minutes? Sometimes, the dying battery is just an excuse to get off the phone (and a good one, at that), but if you really need to conserve the battery, limit your talk time.
-Turn OFF mobile network when not in range: Its very often that you lose the mobile network when you are travelling, so its advisable to turn OFF the mobile network by switching ON Airplane mode. Go to Settings > Wireless & Networks, tick Airplane Mode.
- After each month remove your battery from mobile phone and let it rest for an hour, it will give battery a breath and it will last longer.
-You should not have to turn off your phone to charge it. Most battery chargers deliver more than enough current to power your phone and charge it at the same time. Doing so will not lengthen the charge time, and leaving a phone on allows the user to be aware of its fuel gauge, so that you can remove it when the battery is full.
-When using a car charger, do not charge the battery when the inside temperature of your car is hot. Wait until the car has cooled before you plug in the phone.
Click to expand...
Click to collapse
Gnex secret codes:​
*#*#4636#*#* Testing menu(Phone, Battery & Wifi Info, Usage Statistics).
*#06# MEID number(Display's your IMEI).
*#*#2432546#*#* Checkin(Manually check for System Updates).
*#*#8255#*#* For Google Talk service monitoring.
*#*#786#*#* Hard Reset(Wipes/Resets Data/Profile & internal storage!) (think before you do it! no warning, no go back).
*#*#1234#*#* or *#*#7873778#*#* Open superuser application.
*#123# then press dial. Shows you if you are in your home network or not (only across networks in USA/Canada).
Click to expand...
Click to collapse
Recommendations:​
-Too loud wallpapers may sometimes disturb the look of your home screen and make the icons quite invisible, simple or a less-colored wallpapers are always suggested as to be the best choice. But your choice is what matters.
- Use only essential widgets on your home screen - each widget consumes memory and processing power which can slow your down your phone.
- Uninstall apps that you don't use - after awhile your phone can get cluttered as some Apps are designed to always run in the background. If you rarely use an App, then uninstall it to free up memory and CPU resource.
- It is best to avoid task killers such as Advanced Task Killer. Android is designed to automatically pre-load certain applications, even if you don't load them yourself. If it starts to run low on memory, it will smartly unload the oldest running apps automatically. Manually killing tasks will only mean they get loaded in memory again. Task killers can make the phone slow, laggy, or drain battery life more quickly.
- Always use latest CWM or latest TWRP recoveries.
- Disable USB debugging when it is not in use. Leaving USB debugging enabled makes your phone vulnerable (e.g. lock pattern can be reset).
- Avoid putting your Gnex in direct sunlight, it may affect touch screen & your battery performance.
- Learn how to use ADB & FASTBOOT commands instead of using toolkits, the last could not function properly.
- Flash stock firmware using fastboot is preferred than using odin.
- Check rom/kernel.zip md5 before flashing if it is convenient.
- Always update applications, if available, for better performance.
- Make a backup of your data, applications, contacts...always ready to restore from your computer.
- Read, read and read before you mess with your Gnex.
- Always be sure that you are flashing the right thing for your Gnex variant.
- If you do not know what you are doing, so don't do it .
Click to expand...
Click to collapse
Did you finish reading? Please press Thanks & Rating buttons
Big thanks to the developers of attached files.
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
Great off topic post in AK thread!!!
Thanx for your love and looking out for others
"powered by AK purity v17 Kernel + purity ROM + C.R.88 Wallpapers for beauty"
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
I love this type of thread ... When my mind goes off here I have all infos
Xda with AK Kernel inside
MOD EDIT: For God's sake, Don't quote the entire OP, post edited.
anarkia1976 said:
I love this type of thread ... When my mind goes off here I have all infos
Xda with AK Kernel inside
Click to expand...
Click to collapse
thx AK. im ready for anything to add from any user :good:
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
samersh72 said:
thx AK. im ready for anything to add from any user :good:
Click to expand...
Click to collapse
If I can help ... You can TOC TOC on my door
Xda with AK Kernel inside
hell yea bro!!!!!:good::good::good::good::good::good::good::good:
great thread bro...will be very helpful to new users :good:
k786 said:
great thread bro...will be very helpful to new users :good:
Click to expand...
Click to collapse
Thx for your post bro:good:
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
I'm impressed the majority of best contributor of ak thread create a new place with his experience for help users .....
Keep up the good work
Xda with AK Kernel inside
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
anarkia1976 said:
I'm impressed the majority of best contributor of ak thread create a new place with him experience for help users .....
Keep up the good work
Xda with AK Kernel inside
Click to expand...
Click to collapse
You are the professor AK
Sent from my Galaxy Nexus using xda premium
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
Hi guy can you add to your guide reference for resolve problem Like sk8 battery .... :thumbup:
Thanks a lot for your great guide ....
I hope every user read this make a thanks to you
Xda with AK Kernel inside
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with some Recommendations
anarkia1976 said:
Hi guy can you add to your guide reference for resolve problem Like sk8 battery .... :thumbup:
Thanks a lot for your great guide ....
I hope every user read this make a thanks to you
Xda with AK Kernel inside
Click to expand...
Click to collapse
No problem my friend:thumbup:
Sent from my Galaxy Nexus using xda premium
anarkia1976 said:
Hi guy can you add to your guide reference for resolve problem Like sk8 battery .... :thumbup:
Thanks a lot for your great guide ....
I hope every user read this make a thanks to you
Xda with AK Kernel inside
Click to expand...
Click to collapse
i couldn't figure out properly what is sk8 problem
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with important info to know
jrgilbert79 said:
I have found out how to fix low volume phone wide and give you a reason to buy quality headphones....Guide here. http://forum.xda-developers.com/showthread.php?t=2117648
Click to expand...
Click to collapse
Thx very useful. Testing:thumbup:
Sent from my Galaxy Nexus using xda premium
The code for dialer for manual update checking is nice.
I didn't know that code even exists..
That was really helpful... Thanks!
dmourao said:
That was really helpful... Thanks!
Click to expand...
Click to collapse
you are welcome my friend:good:
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with important info to know
Great topic got a lot useful info :thumbup:
Sent from my smartphone
Amazing
:good:
samersh72 said:
Hello everyone, i see here to collect and post some known and maybe unknown tips and tricks with some important informations, hoping this will be useful for users.
Any more tips, tricks and suggestions from users are always welcomed. And please feel free to make corrections for any wrong or missed information in this post
Questions & Answers​
Q I didn't receive OTA update and i am on stock firmware?
A Go to Settings > Apps > All > Google service framework, clear data and force close it, then go to Settings > About phone > System update > Check now. repeat procedure many times.
Q Can i make a screen shot on stock firmware?
A Yes you can! user doesn’t need to root the device or employ third-party apps just to take a photo of what's happening on screen. Taking a screenshot is simple, just press the volume down and power buttons together. The device will quickly take a snapshot of the screen and you will find it in your notifications.
Q What is Barrel Roll?
A As part of Google's regular antics, it had introduced a "barrel roll" trick for desktop browsers. Type "do a barrel roll" as a search term, and Google would demonstrate the power of modern browsers by flipping everything around on your screen. Your Android device can also do a barrel roll if you speak out the same command. Again, It's great fun to show off.
Q How can i uninstall an app. without going to setting?
A Long-pressing on an app within the app drawer pops up a couple of menus along the top of the screen. App Info gives you the boring technical stuff about how much memory it's taking up, or you can fling it off the other way to uninstall it.
Q How can i go directly to the quick settings menu?
A expand notification bar by sliding two fingers.
Q What is inverted rendering?
A Inverted rendering is a posh way of saying it makes the pages black and turns the text white, so it looks like you're reading the internet from 1997. It also supposedly saves battery, plus is easier on the eyes if you're reading in the dark. It's under the browser's settings tab, within the accessibility area - and there's a contrast slider, too.
Q How can i reboot to safe mode?
A safe mode, the saviour of so many Windows PCs! Long-press the power button, then long-press the Power off option. Choose OK to reboot in safe mode, which completely disables all third-party apps on your device.
Q What does reset app. preferences means?
A Android gives you loads of different options for each installed app, and on the whole this is a very good thing. Sometimes it can be a bad thing, though: you may find your phone playing up because a crucial app has been disabled, or you've changed the notifications for something important like emails. In the apps drawer, you'll find Reset app preferences under the settings. This resets all your apps on a global level, returning actions and data settings to their original levels.
Q What is imojis?
A "Emojis" are the Japanese version of emoticons. You can enable emoji support for the default Jelly Bean keyboard by choosing Language & input in the settings app, then going to the settings for the stock Android keyboard. Here, choose Add-on dictionaries and select Emoji for English words. When you next type certain words (there's a complete list here) you'll see its symbol appear in the predictions bar.
Q I can not see Developer Options in settings?
A Google hide this option on JB 4.2.1, to enable it just go to settings---->about phone, tap 7 times on "build number" and it will be shown in settings.
Q I want to see Jelly Bean on my screen, can i?
A Yes you can, go to settings---->about phone tap quickly 4-5 times on android version, you will see a big Jelly bean, touch and hold it, you will see small flying Jelly beans.
Q How can i put my Gnex in fastboot/recovery mode?
A Turn off your phone, press and hold down Volume Up and Down keys + Power button at the same time until fastboot (bootloader) mode (image of an Android with Start) appears then release the keys. Press volume up or down and select recovery by pressing power button.
Q How can i put my Gnex in download mode (odin mode)?
A Turn off your phone, press and hold down Volume down + Power button at the same time until odin mode appears then release the keys.
Q Why google voice search is crashing when i press on mic when i am on a custom rom?
A Update google search from play store.
Q My Gnex screen is turning on by itself, what is happening?
A It is caused by an application, usually by live wallpapers, try to find it and delete it, or install an antivirus app., i recommend this, scan, delete, wipe cache and dalvik (optional).
Q sometimes i lose packet data (3G) when i turn it off then on, i turn off then turn on my Gnex to enable packet data again?
A There is no need to turn your phone off and on to re-enable packet data, just long press on power button, enable airplane mode for 3-5 seconds then turn it off.
Q I rooted my Gnex, what to do next?
A It is recommended to make a nandroid backup immediately.
Q I rooted my Gnex 4.2.1, made a nandroid backup, but i can not find my backup folder?
A Use a file manager, enable root option, your backup folder is located in data/media/clockworkmod or mnt/shell/emulated/clockwordmod.
Q The kernel does not support PGM, is there a solution?
A change the kernel, or install intellicover application.
Q Do i need to wipe cache partition when flashing a new rom?
A No, there is no need to wipe cache, because when you wipe data/factory reset, cache is wiped automatically. Some said to wipe cache and dalvik after flashing a new rom to prevent any potential conflict.
Q I rooted my Gnex 4.2.1, flash custom recovery, but when i reboot into recovery, it shows the stock recovery!?
A Every OTA update places two files on device system (that are not there on a non-update stock ROM) that re-flash the stock recovery on EVERY boot. The two files are /system/recovery-from-boot.p and /system/etc/install-recovery.sh. You need to make sure that these files are either deleted or renamed, or else custom recovery will disappear when you reboot. These files serve no purpose other than re-flashing the stock recovery on every boot. So, by using something like Root Explorer, delete or rename them, and re-flash your custom recovery.
Q My Gnex won't start, i can not get into fastboot mode, only i can get into download mode?
A Use odin to flash stock firmware here.
Q What is the easiest way to install samsung driver?
A The easiest way is to install Samsung Kies.
Q How can i flash stock image on my Gnex?
A See efrant thread.
Q What about governors, I/O schedulers, TCP congestion?
A See MBQsniper thread.
Q How to properly post a kernel bug (LAST_KMSG)?
A See ciprianruse88 thread.
Q What is the best kernel for my Gnex?
A There is no something called "best kernel". You must try many kernels and decide what suit your rom and your need. But for me AK kernel is the most active kernel in update releases that suit most roms.
Rooting:​
Rooting is often performed with the goal of overcoming limitations that carriers and hardware manufacturers put on some devices, resulting in the ability to alter or replace system applications and settings, run specialized apps that require administrator-level permissions, or perform other operations that are otherwise inaccessible to a normal Android user. Rooting is similar to jailbreaking devices running the Apple iOS operating system. On Android, rooting can also facilitate the complete removal and replacement of the device's operating system, usually with a more recent release of its current operating system. Rooting enables all the user-installed applications to run privileged commands that are typically unavailable to the devices in their stock configuration.
Legality: The Free Software Foundation Europe argues that it is legal to root or flash any device. According to the European Directive 1999/44/CE, replacing the original operating system with another does not void the statutory warranty that covers the hardware of the device for two years unless the seller can prove that the modification caused the defect.
On July 26, 2010, the United States announced a new exemption making it officially legal to root a device and run unauthorized third-party applications, as well as the ability to unlock any cell phone for use on multiple carriers.
Safety: I Have always said that the person should learn the Android OS before rooting. It is a good idea to have an idea of what rooting is doing and what it will affect. I would say spend your time really learning the OS which is not a small task. Then, if you still feel like it, go ahead and root. While rooting can help you learn many things about your device, it also can reap very bad consequences, such as:
-Bricking your phone (or in an easier way to explain, making your phone a pretty paper weight).
-Corrupting core files.
-Stopping OTA updates from going to your phone.
-Voiding phone warranty.
-Have your phone open to malicious software and applications that can do serious harm to your phone.
As you can see, it can reap very negative things. I have read/seen people who have literally had to buy brand new phones because they tried the latest and greatest rom. Rooting is essentially something that you must take at your own risk & caution. Generally, if you follow exactly the procedure of rooting made by developers, you will be more likely on the safe side.
Problems can happen:​
-Stuck into a Bootloop: Bootloops are mainly caused by system files interfering with each others which cause instability and/or crash at the boot sequence. so what to do? pull out battery then reinsert it, boot into recovery, wipe cache and dalvik, reboot. If not, format data, system, cache using recovery and restore stock firmware (supposing that you did a nandroid backup before). if you don't have a backup to restore, flash any custom rom from your sdcard after formatting system & data & cache. If you don't have a custom rom in your sdcard, push one from your pc using adb (supposed that you have adb file or sdk on your pc): boot into recovery, connect your phone to the computer open command prompt and write the following command then hit enter (supposing that your rom is placed on D):
Code:
adb push D:\name of rom.zip /data/media
once done, go to your phone and install the rom.zip from recovery, reboot.
If none of above methods works, then flash stock image for your Gnex using fastboot commands here.
-Nexus is quietly dead: If your phone did not respond to anything, it won't turn on, can not boot into fastboot or download mode, black screen, try "OMAP flash", it can save your Gnex OMAP FLASH.
Battery Conservation Tips:​
-Enable Auto Brightness: Brightness can lure a lot of battery if not changed intelligently with time to match the surroundings, Jellybean in this case brought the “Auto Brightness” function which uses the accelerometer within the device to detect the amount of light in the surroundings and then act upon the brightness level according to it. To enable, go to Settings > Device > Display > Brightness, and tick “Automatic Brightness“.
-Remove Live Wallpapers: Using a live wallpaper is another battery sucking feature. If you turn out to be truly saving battery, make sure not to use any live wallpaper.
-Disable Location and GPS services: Keeping GPS ON at all times, decreases your battery life, so its better to disable it while not in use. To disable, go to Settings > Personal > Location access > and switch it off.
-Disable Wi-Fi or Mobile Data when not in use: Try to avoid situations when you keep your Wifi or Mobile Data ON even when the phone is set in standby.
-Manage Sync carefully: Keeping the Sync ON all the time is another reason for decreased battery life. Enable it anytime you want, manage your emails or services and again turn it off. For those who are on work and want real-time push notifications are advised not to follow this tip.
-Turn OFF Haptic Feedback and screen sounds: To save a little more on battery, its better to switch off the screen touch sounds and vibrations. To do so, go to Settings > Device > Sound and untick Dial pad touch tones, Touch sounds. Screen lock sound and Vibrate on touch.
-Turn OFF bluetooth: Disabling bluetooth when you are not using it, is another way to save battery juice.
-Turn OFF mobile network when not in range: Its very often that you lose the mobile network when you are travelling, so its advisable to turn OFF the mobile network by switching ON Airplane mode. Go to Settings > Wireless & Networks, tick Airplane Mode.
Gnex secret codes:​
*#*#4636#*#* Testing menu(Phone, Battery & Wifi Info, Usage Statistics).
*#06# MEID number(Display's your IMEI).
*#*#2432546#*#* Checkin(Manually check for System Updates).
*#*#8255#*#* For Google Talk service monitoring.
*#*#786#*#* Hard Reset(Wipes/Resets Data/Profile & internal storage!) (think before you do it! no warning, no go back).
*#*#1234#*#* or *#*#7873778#*#* Open superuser application.
Recommendations:​
-Too loud wallpapers may sometimes disturb the look of your home screen and make the icons quite invisible, simple or a less-colored wallpapers are always suggested as to be the best choice. But your choice is what matters.
- Always use latest CWM or latest TWRP recoveries.
- Disable USB debugging when it is not in use. Leaving USB debugging enabled makes your phone vulnerable (e.g. lock pattern can be reset).
- Avoid putting your Gnex in direct sunlight, it may affect touch screen & your battery performance.
- Learn how to use ADB & FASTBOOT commands instead of using toolkits, the last could not function properly.
- Flash stock firmware using fastboot is preferred than using odin.
- Check rom/kernel.zip md5 before flashing if it is convenient.
- Always be sure that you are flashing the right thing for your Gnex variant.
- If you do not know what you are doing, so don't do it .
Did you finish reading? Don't forget to press Thanks & Rating buttons ​
Click to expand...
Click to collapse
Its Amazing post .. Thanx buddy .. Good luck for the future ..
Re: [Ref] Galaxy Nexus 4.2.1 tips & tricks with important info to know
Subscribed! Awesomeeee OP! this is soo worth a sticky!
Sent from my Nexus Prime

Screen Overlay detected

After attempting to install a Bank App my phone I get the following error on any app that accesses the Camera.
Allow Open Camera to take pictures and record video?
after selecting allow I get the following:
-------------------------------------------------------
Screen Overlay detected
To change this permission section you first have to turn off the screen overlay from Settings > Apps
Click to expand...
Click to collapse
If I attempt to use Cam-Scanner I got
Please go to Settings to enable storage permissionso you can save docs
(Settings apps-camScanner-permissions-storage)
Click to expand...
Click to collapse
When I select permissions it says no permissions granted. When I try to turn on storage permissions I get screen overlay message seen above.
I never had this issue before. Is there something going on with my permissions and how do I correct it?
thanks for your help
Go to Settings -> Apps -> 3 dots Configure apps -> Special access -> Draw over other apps
One of the apps listed here is the problem, try to disable one by one until the problem is fixed.
lucyr03 said:
Go to Settings -> Apps -> 3 dots Configure apps -> Special access -> Draw over other apps
One of the apps listed here is the problem, try to disable one by one until the problem is fixed.
Click to expand...
Click to collapse
If you are running on marshmallow(6.*) Ignore that, first restart the phone on safe mode and then do what this member said(i had the same problem before nougat) or just give the app permissions while you are in safe mode.
Thanks for the reply.
I appear to be a bit different. 3dot menu has show system, sort by size and Reset app preferences.
Gear menu has Draw over apps. Unfortunately when I select Draw Over apps I find that all of the apps with the exception of a recently installed one are disabled.
My feeling is that I have had some time of File permissions SNFU that pretty much farked everything. At the moment I can not access files on a computer via usb and am not even able to read my SD directly from a computer.
Any suggestions on fixing hosed permissions or other would be extremely helpful.

Just tweak it [Tab S4] - debloat, root, plugins, battery...

Tab S4 stock cleanup actions
phablet guide fest continues V30->Note9->6T->Mi9->S10->7T->Tab S6->Tab S4, time to provide some thoughts, easy to click links and guides. Goal is to have a clean device after each update, and have a helper script running at boot or on demand. This is a tablet, we want to achieve flat battery graphs when it is unused (picture attached), hopefully charge once a week with slight usage.
Debloat
What the script does:
* choose 8 categories of app removal, in the beginning of the file
for each say 0=skip 1=remove 2=revert back
* use more switch to disable some questionable/helpful stuff
* disable up to 80 apps with possibility to revert back
* remove usage access for google (do manually)
* remove device admin backdoor "Find My Mobile", you won't recover stolen device this way lol, it doesn't work with Secure Startup! it's useful for Govt.
* remove proca (which was slowing down tablet after rooting), if it doesn't work from your shell, edit the file as below
Tested ok on March stock Pie firmware. Samsung has too much bloatware installed, and requires shocking permissions to run some basic services. We will further need to reclaim privacy. As for debloat list, i've cooked the list based on knowledge of each process, its current presence in the Pie firmware, and what would fit the tablet usage. In this case, i'm leaving Samsung account, Galaxy shop and few pen apps and we assume XPrivacy is sending these snitch services bogus personal details.
Download: (file attached)
Installation:
- run in su terminal once or add to any startup script (3C\Device mgr\Scheduler can assign scripts from /storage/emulated/0/Android/data/ccc71.at/scripts), or to magisk
Rooting
We want encryption. There are no ROMs, and TWRP can be used for many other tasks without access to your files.
OEM unlock in dev settings
when turned off and rather plugged it to your PC with drivers installed, hold Power & Vol+ & Vol- til you see download screen, confirm with Vol+
in ODIN, slap TWRP into AP while "Auto reboot" is unchecked
hold Power & Vol- to exit download mode, then Power & Vol+ to enter recovery
in TWRP, slap kernel and Magisk into tablet from SD card or USB (can be usb flash, can be other mobile, can be adb)
in TWRP, say boot to system and wait 5min
check Magisk app status, enable USB debugging in dev settings
kernel: WETA recovery: TWRP 3.3.1 for PIE SM-T83x
watch kernel log for 20sec
Code:
dmesg -Tw|grep proca
if proca messages appear open /vendor/etc/init/pa_daemon_qsee.rc and comment the lines
You should enable "Secure startup" in "Biometrics and security" settings. Recovery should fail reading encrypted drive sda27 because of its crypto flags and logical mapping.
Which plugins to use
Similarly to Mi9, collecting what i think is useful to keep on stock rooted firmware.
Magisk plugins:
* Riru - Core, Riru - Ed Exposed -- brings XPosed to Pie. Need also installer. Make a choice SandHook/Yahfa bipolar release, i never found out which one is better.
* libsecure_storage companion -- helps us keep the bluetooth pairings
* (optional) YouTube Vanced black themed -- brings usable YouTube experience. Unfortunately it's now a horror to install (v15), but v14 from Magisk still works.
* (optional) Move certificates -- perhaps
* (impossible) QuickSwitch -- there's no pill but Samsung custom recents... oh how glad i am for it now! Android10 cancelled this fantastic Pie pill already and you can scroll apps in OneUI!
XPosed plugins:
* Xposed Edge Pro -- a must have and best plugin
* XPrivacy -- Screw the big brother. Must have of the century. Disabling analytics, tracking, telephony, network, identification for all visible apps and all Google and Samsung apps with some exceptions.
* Firefds kit -- so this is our main customization app irrelevant here: ..and enables the very important call recording, which is beutifully integrated into call history. Bye bye external apps. Also for Samsungs it forces Restart "recovery"
* (optional) Xposed Dex -- some tweaks
* (optional) afWall -- Problems with this firewall and some VPN clients for years. Using AdGuard now and happy. It can even control DNS, no need one of those paid lausy apps. This plugin should by disabled in Xposed.
* (optional) Exi for Swiftkey -- you can make Swiftkey great again, GBoard is still the best, Samsung keyboard is very good, but too tall and leaves gap in fullscreen mode
Root apps:
* TitaniumBackup -- a must since Android was born
* Adaway -- a must but with AdGuard not so.. but i use both
* AdGuard -- can filter more and can amend requests.. that's a game changer. You can have a efficient proxy when rooted.
* 3C toolbox -- too helpful not to pay for the biggest package
* (optional) Root Essentials -- a multitool, have a look
* (optional) MiXplorer -- best file manager, replaces spyware ES File explorer you had before. Edits root files comfortably even when other editors don't
* (optional) FolderSync -- best sync tool
Battery
Battery saving:
- tablet should not be neccessarily always connected, receive notifications, so why not keep it dead when the screen is off
- the key is to disable background network activity:
disable it overall by Medium Power Saving mode
disable background network for individual apps (there's "Allow background data usage" and also nice "Allow background activity" checkbox)
force it with 3C (Device Mgr\Profiler) or Adguard (App Management)
- can't see wifi switch.. to turn wifi off when screen off. no wifi scanning drainer or other "intelligent" bs functions there either. just "Hotspot 2" - turn off.
- nearby scanning should be off, what a useless function of finding unknown devices - once you pair the known, what's the sense? or you keep connection 10 new bt devices each week? just a drain and endless beacon
- location can be off, and again it can be scripted by turning on only when screen is on by 3C
- not installing {LSpeed, Naptime, Servicely, FDE, LKT, Universal GMS Doze, Sysconfig patcher} here
- no signifficant doze functions here {AOD, fp icon, dt2wake, raise2wake} to speak off
- we want battery to remain flat when screen off, last tablet i had could do -1% per week! let's do it here
Other
- i like tender boot screen indicating knox off status, no need to flash boot logos
- no boot keys needed like on Tab s6
- not using multidisabler as i'm on stock and i do want encryption on every device ever
- how to launch camera quickly?? still dind't find out
- don't be afraid to use another device (mobile) as USB drive.. this way you can restore your apps directly via TitaniumBackup without copying it first! also Smart Switch can be used from non-Samsung phones, but it is as weak as Google backup ever was - no data restore
What do you do to run this exactly?
copy the file to storage. open su terminal. Get any root terminal app (ConnectBot, 3C Toolbox, or adb shell) and run as root. I run this script as autostart on each of my devices.
wifi_standby_test: first battery standby test: 37 hours to 91%, i've 'charging protection' so approx 93% that give us 0.19%/hr drain with wifi and bluetooth on. 10x less then a mobile (S10). Good start, nice 3 weeks of standby potential, but let's try medium power saving mode to squeeze it to over month of standby.
Will i loose my data while rooting? Im on Build number PPR1.180610.011.T835DDS4BSL2
doggydog2 said:
Tab S4 stock cleanup actions
phablet guide fest continues V30->Note9->6T->Mi9->S10->7T->Tab S6->Tab S4, time to provide some thoughts, easy to click links and guides. Goal is to have a clean device after each update, and have a helper script running at boot or on demand. This is a tablet, we want to achieve flat battery graphs when it is unused (picture attached), hopefully charge once a week with slight usage.
Debloat
What the script does:
* choose 8 categories of app removal, in the beginning of the file
for each say 0=skip 1=remove 2=revert back
* use more switch to disable some questionable/helpful stuff
* disable up to 80 apps with possibility to revert back
* remove usage access for google (do manually)
* remove device admin backdoor "Find My Mobile", you won't recover stolen device this way lol, it doesn't work with Secure Startup! it's useful for Govt.
* remove proca (which was slowing down tablet after rooting), if it doesn't work from your shell, edit the file as below
Tested ok on March stock Pie firmware. Samsung has too much bloatware installed, and requires shocking permissions to run some basic services. We will further need to reclaim privacy. As for debloat list, i've cooked the list based on knowledge of each process, its current presence in the Pie firmware, and what would fit the tablet usage. In this case, i'm leaving Samsung account, Galaxy shop and few pen apps and we assume XPrivacy is sending these snitch services bogus personal details.
Download: (file attached)
Installation:
- run in su terminal once or add to any startup script (3C\Device mgr\Scheduler can assign scripts from /storage/emulated/0/Android/data/ccc71.at/scripts), or to magisk
Rooting
We want encryption. There are no ROMs, and TWRP can be used for many other tasks without access to your files.
OEM unlock in dev settings
when turned off and rather plugged it to your PC with drivers installed, hold Power & Vol+ & Vol- til you see download screen, confirm with Vol+
in ODIN, slap TWRP into AP while "Auto reboot" is unchecked
hold Power & Vol- to exit download mode, then Power & Vol+ to enter recovery
in TWRP, slap kernel and Magisk into tablet from SD card or USB (can be usb flash, can be other mobile, can be adb)
in TWRP, say boot to system and wait 5min
check Magisk app status, enable USB debugging in dev settings
kernel: WETA recovery: TWRP 3.3.1 for PIE SM-T83x
watch kernel log for 20sec
Code:
dmesg -Tw|grep proca
if proca messages appear open /vendor/etc/init/pa_daemon_qsee.rc and comment the lines
You should enable "Secure startup" in "Biometrics and security" settings. Recovery should fail reading encrypted drive sda27 because of its crypto flags and logical mapping.
Which plugins to use
Similarly to Mi9, collecting what i think is useful to keep on stock rooted firmware.
Magisk plugins:
* Riru - Core, Riru - Ed Exposed -- brings XPosed to Pie. Need also installer. Make a choice SandHook/Yahfa bipolar release, i never found out which one is better.
* libsecure_storage companion -- helps us keep the bluetooth pairings
* (optional) YouTube Vanced black themed -- brings usable YouTube experience. Unfortunately it's now a horror to install (v15), but v14 from Magisk still works.
* (optional) Move certificates -- perhaps
* (impossible) QuickSwitch -- there's no pill but Samsung custom recents... oh how glad i am for it now! Android10 cancelled this fantastic Pie pill already and you can scroll apps in OneUI!
XPosed plugins:
* Xposed Edge Pro -- a must have and best plugin
* XPrivacy -- Screw the big brother. Must have of the century. Disabling analytics, tracking, telephony, network, identification for all visible apps and all Google and Samsung apps with some exceptions.
* Firefds kit -- so this is our main customization app irrelevant here: ..and enables the very important call recording, which is beutifully integrated into call history. Bye bye external apps. Also for Samsungs it forces Restart "recovery"
* (optional) Xposed Dex -- some tweaks
* (optional) afWall -- Problems with this firewall and some VPN clients for years. Using AdGuard now and happy. It can even control DNS, no need one of those paid lausy apps. This plugin should by disabled in Xposed.
* (optional) Exi for Swiftkey -- you can make Swiftkey great again, GBoard is still the best, Samsung keyboard is very good, but too tall and leaves gap in fullscreen mode
Root apps:
* TitaniumBackup -- a must since Android was born
* Adaway -- a must but with AdGuard not so.. but i use both
* AdGuard -- can filter more and can amend requests.. that's a game changer. You can have a efficient proxy when rooted.
* 3C toolbox -- too helpful not to pay for the biggest package
* (optional) Root Essentials -- a multitool, have a look
* (optional) MiXplorer -- best file manager, replaces spyware ES File explorer you had before. Edits root files comfortably even when other editors don't
* (optional) FolderSync -- best sync tool
Battery
Battery saving:
- tablet should not be neccessarily always connected, receive notifications, so why not keep it dead when the screen is off
- the key is to disable background network activity:
disable it overall by Medium Power Saving mode
disable background network for individual apps (there's "Allow background data usage" and also nice "Allow background activity" checkbox)
force it with 3C (Device Mgr\Profiler) or Adguard (App Management)
- can't see wifi switch.. to turn wifi off when screen off. no wifi scanning drainer or other "intelligent" bs functions there either. just "Hotspot 2" - turn off.
- nearby scanning should be off, what a useless function of finding unknown devices - once you pair the known, what's the sense? or you keep connection 10 new bt devices each week? just a drain and endless beacon
- location can be off, and again it can be scripted by turning on only when screen is on by 3C
- not installing {LSpeed, Naptime, Servicely, FDE, LKT, Universal GMS Doze, Sysconfig patcher} here
- no signifficant doze functions here {AOD, fp icon, dt2wake, raise2wake} to speak off
- we want battery to remain flat when screen off, last tablet i had could do -1% per week! let's do it here
Other
- i like tender boot screen indicating knox off status, no need to flash boot logos
- no boot keys needed like on Tab s6
- not using multidisabler as i'm on stock and i do want encryption on every device ever
- how to launch camera quickly?? still dind't find out
- don't be afraid to use another device (mobile) as USB drive.. this way you can restore your apps directly via TitaniumBackup without copying it first! also Smart Switch can be used from non-Samsung phones, but it is as weak as Google backup ever was - no data restore
Click to expand...
Click to collapse
Bro. Is it possible to do this without losing data?
mayank_nigam said:
Will i loose my data while rooting? Im on Build number PPR1.180610.011.T835DDS4BSL2
Click to expand...
Click to collapse
backup, try and let us know the reason why usual root methods wipe data is to remove encryption, we don't need that.
doggydog2 said:
backup, try and let us know the reason why usual root methods wipe data is to remove encryption, we don't need that.
Click to expand...
Click to collapse
So if we do it without turning oem unlock, will it work?
---------- Post added at 04:41 PM ---------- Previous post was at 04:26 PM ----------
doggydog2 said:
backup, try and let us know the reason why usual root methods wipe data is to remove encryption, we don't need that.
Click to expand...
Click to collapse
Any suggestions on backup method?
mayank_nigam said:
So if we do it without turning oem unlock, will it work?
Click to expand...
Click to collapse
ah i see... you need this checkbox unlocked to flash. this device will wipe itself if you just toggle the checkbox. so in the end, data will be wiped in transition from unrooted state.
and regarding backup, just conventional methods like google backup or deeper cable backup by Helium which can partially substitute TitaniumBackup on unrooted device.
How did you get Weta running on the March firmware when it isn't supported?
NM, I see you just used the kernel part.
Running this script did very little for me - no options were given, just a few packages disabled before it errored out
Thank you for the script! It made a great difference on my tab s4, I was able to enable back Chrome and Google.
My device was lagging before... Thanks again for the write up...
Any suggestions on installing apps to sd card? The option under dev options, to force install apps to sd card is not really good.
I just purchased a refurb Tab S4, it should be arriving over the weekend. The seller notes that the S4 is on Oreo.
I noticed references to Pie here. Should boot and I let the tablet update to the latest release from Samsung, and then root / debloat as described in this thread after the Pie update?
¿GotJazz? said:
I just purchased a refurb Tab S4, it should be arriving over the weekend. The seller notes that the S4 is on Oreo.
I noticed references to Pie here. Should boot and I let the tablet update to the latest release from Samsung, and then root / debloat as described in this thread after the Pie update?
Click to expand...
Click to collapse
My Tab S4 arrived today. Should I allow any updates from Samsung be installed before I run through the rooting process described here, or should I do the rooting before getting the Samsung updates?
¿GotJazz? said:
My Tab S4 arrived today. Should I allow any updates from Samsung be installed before I run through the rooting process described here, or should I do the rooting before getting the Samsung updates?
Click to expand...
Click to collapse
yes..why rooting an old version.. no OTAs later so you'd have to update manually again.
doggydog2 said:
yes..why rooting an old version.. no OTAs later so you'd have to update manually again.
Click to expand...
Click to collapse
Thanks!
But, as it turns out ... I won't be able to root or debloat anyways. I purchased a refurb Tab S4 that appears to be in excellent like-new shape, but it was also mislabeled on Amazon.
Instead of getting a SM-T830, I received a SM-T837T (T-Mobile version). I plan on getting it unlocked so that I can use it on AT&T, but from what I understand, it's unrootable.
Thanks, tho!
¿GJ?
doggydog2 said:
yes..why rooting an old version.. no OTAs later so you'd have to update manually again.
Click to expand...
Click to collapse
I was wondering about this. So there is no way to update once rooted, other than a full clean flash and start again?
ghoulie said:
I was wondering about this. So there is no way to update once rooted, other than a full clean flash and start again?
Click to expand...
Click to collapse
later use Frija to get new firmware and update. cleaning is only on first root as we can't avoid it when switching the OEM lock.
This thread is really one of the best thread for tab S4
Thanks for that
Sent from my SM-T830 using Tapatalk
Question, now that 10 is out will you update the OP, some things change.
I am not sure things like exposed can be update? Tried and get some reboot.
Proca not present and other things.
Thank you for your work
Sent from my SM-T830 using Tapatalk
Looks like it is not working anymore on Android 10:
https://forum.xda-developers.com/galaxy-tab-s4/development/rom-t4137013

Resolution - Developer Options > OEM Unlock toggle disabled on XT1955-5

Greetings,
I just wanted to share my solution to resolution of a brand-new Moto G7 Power XT1955-5 having the developer option "OEM Unlock" disabled. I see issues for a separate model here:
https://forum.xda-developers.com/g7-power/help/oem-unlock-greyed-t4061763
I do not know if my solution will work for other models. My XT1955-5 was manufactured in 2020 06 and purchased in US.
My intent here was to get the bootloader unlocked for installation of custom ROMS as quickly as possible.
Start Phone
Skip all setup options.
Enable Developer Mode
Enable USB Debug
In about phone > time/ date settings, disable all toggles
Set phone to a period of 8 days ago - arbitrary number
Reset Phone
Reset Date to correct date (leave toggles as-is)
Connect to a wireless network with access to Internet (I was using a WiFi, and did not try data)
Read first before attempt - Done quickly -> Phone begins downloading security patch (or it begins with next step - not sure) - Done quickly -> Attempt to set up an account (Google) whilst phone is downloading security patch - account setup waits for security patch update - Proceed to developer options - OEM Unlock toggle is available - Toggle during download.
I strongly suspect that there is some trigger associated with either downloading a security update, or simply attempting to enable an account on the phone (which requires you to be connected to data), but I do not know which. It is likely that there is not specific time sensitivity involved, but I am including my exact actions that resulted in success.
I hope it helps. Happy development!
humanWithAPhone said:
Greetings,
I just wanted to share my solution to resolution of a brand-new Moto G7 Power XT1955-5 having the developer option "OEM Unlock" disabled. I see issues for a separate model here:
https://forum.xda-developers.com/g7-power/help/oem-unlock-greyed-t4061763
I do not know if my solution will work for other models. My XT1955-5 was manufactured in 2020 06 and purchased in US.
My intent here was to get the bootloader unlocked for installation of custom ROMS as quickly as possible.
Start Phone
Enable Developer Mode
In about phone > time/ date settings, disable all toggles
Reset Phone
Connect to a wireless network with access to Internet (I was using a WiFi, and did not try data)
Read first before attempt - Done quickly -> Phone begins downloading security patch (or it begins with next step - not sure) - Done quickly -> Attempt to set up an account (Google) whilst phone is downloading security patch - account setup waits for security patch update - Proceed to developer options - OEM Unlock toggle is available - Toggle during download.
I strongly suspect that there is some trigger associated with either downloading a security update, or simply attempting to enable an account on the phone (which requires you to be connected to data), but I do not know which. It is likely that there is not specific time sensitivity involved, but I am including my exact actions that resulted in success.
I hope it helps. Happy development!
Click to expand...
Click to collapse
Were u able to get bootloader unlocked
roadkill42 said:
Were u able to get bootloader unlocked
Click to expand...
Click to collapse
Yes. The bootloader is now unlocked. I did have to obtain an unlock code from Motorola. The primary issue here was the inability to toggle "OEM Unlock".
I was using Motorola's guides that are linked from this website:
support . motorola . com/us/en/solution/MS87215

How to disable stock rom updates without root?

So i got A29 build and i dont want any updates. I have turned of aito night update, i have turned off auto system update in developer options but i still keep getting proposals to install an update like twice a day. That is annoying. How can i kill an app so taht would stop bugging me? Thanks!
I am sure I do not know the best ways, but here are the ways I have written down so far (I too, never want any updates). Looks like 1,2 and 3 require no root, and 6 is just a good point to remember:
1 - check "Software Update" screen: (Settings > Software Update)
2 - check “Automatic system updates” screen:
a - Settings > About Phone > Software Information > tap "Buld Number" 7 to 10 times to enable "Developer Mode"
b - Settings > Developer options > Automatic system updates
3 - purchase and sideload the Package Disabler Pro app (disables OTA forever)
4 - on AmazonKindle, deleting the /system/etc/security/otacerts.zip will prevent updates since their signatures can't be verified by the device
5 - chown root and chmod 755 the /cache partition can do the same as above (but will it affect recovery?)
6 - while you work on a phone to disable the updates, do not forget not to insert a SIM and not to connect to WiFi, untill the OTA is fully blocked / disabled.
As for how to get rid of the NAG about the updates already downloaded and waiting for the installation, i THINK you might want to wipe cache? Because that's where they are stored while waiting?
It is good that you do not have the A/B system device, where the damn updates are installed on the fly!
If nothing works, this is why I always need root. Because the manufacturer pushes me to, leaves me no way out to just peacefully coexist, they just have to force feed their updates to us. Good luck bro.

Categories

Resources