Related
I'm using Snipers PACMAN, and battery just seems to drain way to fast. It is the latest push. Being newly registered on here I hate to introduce my self this way but I need advice. What tweaks are being used by people for the SPH-D710 to help with this issue? I originally started with the CM 10.1 rom and found I had no data, flashed a different modem. Still no data, switched roms and now have data....go figure! But the battery drain is killing me, I've got it throttled back as far as I can go and it still be a daily driver. So anyone have any suggestions?
Godlys Comadose Tweak pack works great:thumbup:
Give it a shot and thank him while you're over there...here's the link
http://forum.xda-developers.com/showthread.php?p=39080082
OK....now I'm lost as to which to try and use.....reading the posts to the provided links seems to give contradictory information as to where to start this journey.....
Sent from my SPH-D710 using xda premium
Most 4.2 Roms use ICS modems. As for battery us betterbatterystats found here on xda or gsam in the play store to determine if there's any rogue apps keeping the phone from sleeping. I also do manual syncing. Greenify is a great app to keep apps from running on their own. You can also use a custom kernel to limit max frequency and even undervolt. Kernels also come with different governors
Sent from my SPH-D710 using Tapatalk 2
godzilla61 said:
OK....now I'm lost as to which to try and use.....reading the posts to the provided links seems to give contradictory information as to where to start this journey.....
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
Try the latest version....2.1
Anybody on this thread know anything about the pegasusq governer or how to implement it/install it?
rapman543 said:
Anybody on this thread know anything about the pegasusq governer or how to implement it/install it?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=24233103&postcount=3
Read...Read...Read
After reading through the above posts you should have some useful ideas about what this governor does.Also...as for installing a governor, they will be included in the kernel that flashed with ur rom or a kernal of ur choosing(MAKE SURE IT WILL WORK WITH THE ROM YOU HAVE) Im new to this, so if there is another way I dont know about it. Do ur research... As for setting a governor.. There are many roms with built in performance controls as well as many apps to set them. I suggest (set cpu) . It has a setting that will make a zip so u can recover from ur settings if u bootloop. This is found after u install and give it root permission. Hit ur menu button and click SAFE MODE. You should have a nandroid; always and just because.I hope this helps.. Remember...Read...Read...Read..lol.. Good Luck.Also read this http://forum.xda-developers.com/showthread.php?t=2005306
Gil81 said:
http://forum.xda-developers.com/show...03&postcount=3
Read...Read...Read
After reading through the above post you should have some useful ideas about what this governor does.Also...as for installing a governor, they will be included in the kernel that flashed with ur rom or a kernal of ur choosing(MAKE SURE IT WILL WORK WITH THE ROM YOU HAVE) Im new to this, so if there is another way I dont know about it. Do ur research... As for setting a governor.. There are many roms with built in performance controls as well as many apps to set them. I suggest (set cpu) . It has a setting that will make a zip so u can recover from ur settings if u bootloop. This is found after u install and give it root permission. Hit ur menu button and click SAFE MODE. You should have a nandroid; always and just because.I hope this helps.. Remember...Read...Read...Read..lol.. Good Luck.
Click to expand...
Click to collapse
+1
You identify yourself as "new to this" but you nailed this post 110%!! Many people would do well to take what you said here to heart. If they did there would be MANY fewer "help me" threads.
CyberpodS2 said:
+1
You identify yourself as "new to this" but you nailed this post 110%!! Many people would do well to take what you said here to heart. If they did there would be MANY fewer "help me" threads.
Click to expand...
Click to collapse
Thank You...... I went ahead and added another link for him to read. I hope it helps. As to what you said, I like to think of myself as the poster child for the search button..lol..I think if you do the research it makes you feel better when it works and it is more likely to stick with you. This site is so great about that because there is just so much knowledge here to learn.I think some people get over-whelmed by it though or they are just unsure and need that go ahead push to know it works.
Ok since I can't ask a Dev a question about the kernel I want to install.....which I kinda understand, but being stuck not being able to ask questions about something specific after reading all the pages blows! (rant off) [Kernel] Lightning Zap! Phase 4 Updated 15JUN13 is causing a boot loop, I followed all the instructions to the letter, crossed every T, dotted all the I's. Thank god for backup! Since I can't ask the Dev a question I'm stuck!
godzilla61 said:
Ok since I can't ask a Dev a question about the kernel I want to install.....which I kinda understand, but being stuck not being able to ask questions about something specific after reading all the pages blows! (rant off) [Kernel] Lightning Zap! Phase 4 Updated 15JUN13 is causing a boot loop, I followed all the instructions to the letter, crossed every T, dotted all the I's. Thank god for backup! Since I can't ask the Dev a question I'm stuck!
Click to expand...
Click to collapse
Well, you're commenting on a thread about battery life, but not posting about battery life. That's not going to help you much.
I also read that you want to ask a question, but I don't see a question in your post. If you do have a question, a great place to post it would be here: [Official] One Stop FAQ Thread - Noob Friendly (All questions go here). Okay? :good:
erikalin said:
Well, you're commenting on a thread about battery life, but not posting about battery life. That's not going to help you much.
I also read that you want to ask a question, but I don't see a question in your post. If you do have a question, a great place to post it would be here: [Official] One Stop FAQ Thread - Noob Friendly (All questions go here). Okay? :good:
Click to expand...
Click to collapse
Well let me clarify it for you, it's my thread. The original question is still valid being as I was pointed this direction by a reply to my original post. Let me lessen your confusion on this matter......What other steps can I take to increase battery life......scripts didn't seem to help and a tweaked kernel put me in a boot loop....and whom do I ask if not the DEV?
godzilla61 said:
Well let me clarify it for you, it's my thread. The original question is still valid being as I was pointed this direction by a reply to my original post. Let me lessen your confusion on this matter......What other steps can I take to increase battery life......scripts didn't seem to help and a tweaked kernel put me in a boot loop....and whom do I ask if not the DEV?
Click to expand...
Click to collapse
Hey bro, easy on the tone. Because there are so many ways to ask the question, the best way is to just spell it out how you did above. Battery life depends on the apps/ROM/user all at the same time. I am on Project X ROM. It has Crossbreeder installed. Now I am not no where informative about that app other than a lot of people like it. So with that being said and it is installed on the ROM, I leave it. I also have ROM Toolbox Pro. I have adjusted my CPU control to 1000MHZ. I also have DS Battery Saver Pro set to custom and to kill all apps when the screen goes off. Last the ROM I am on comes with Greenify. A great app in saving battery. I also turn off data and only have WIFI on when I need it. No need to just let things run. With that I have had 50% battery life left after 11 hrs. That is my setup and may not work for you. The main thing is to understand that battery life for EACH phone is different no matter how many common denominators people may have. Team Venum did a comparison of ROM's and their respective battery life. I don't know the post, but if you type "battery life" in the search, then I am sure you can find it. As for you response, I was in your shoes at one time. It does help to be specific in your questions. Not saying that you weren't. Reading each and every post will get tiresome, but if you type in what you want in the search, you will get a slew of post to get info. I have only been a member for 4 months, but I have learned how to flash a ROM, Mods, push and app, setup custom home screen. I have even been given the honor of testing a ROM. If you still need help, you can PM me and I will do what I can. Have a great one.
godzilla61 said:
Ok since I can't ask a Dev a question about the kernel I want to install.....which I kinda understand, but being stuck not being able to ask questions about something specific after reading all the pages blows! (rant off) [Kernel] Lightning Zap! Phase 4 Updated 15JUN13 is causing a boot loop, I followed all the instructions to the letter, crossed every T, dotted all the I's. Thank god for backup! Since I can't ask the Dev a question I'm stuck!
Click to expand...
Click to collapse
Its fine,you can rant here...lol..Ok ,I need more info.....
rom you're try to use with lz kernal
how you went about flashing said kernel
did you have any other tweaks or mods flashed before flashing lzp_4
All of this info is important, so I can tell you what is wrong....Thanks..
Gil81 said:
Its fine,you can rant here...lol..Ok ,I need more info.....
rom you're try to use with lz kernal
how you went about flashing said kernel
did you have any other tweaks or mods flashed before flashing lzp_4
All of this info is important, so I can tell you what is wrong....Thanks..
Click to expand...
Click to collapse
Thanks Gil, this is exactly what I have done.
1. flashed from 4.03 to WILD-FOR-THE-NIGHT-07052013-d710, had no data....tried to find a fix for that...gave up after trying tweaks to help with the battery issue and no data.
2. Clean install of d710_PAC_JB_4.2.2-v23.0.0_20130719-015400, now have intermittent data, wifi works, blutooth works, flashed Fl24 modem with no apparent improvement in data connectivity, thought after reading a kernel flash might fix issues, here comes the boot loop....flashed smdk4412_p4 waited patiently for 2hrs watching Pacman chasing ghosts.....booted into recovery and ran my backup tried it 2 more times on clean flashs gave up after 5 hrs. By clean I mean wipe/reset, wipe cache, wipe dalvik, install from zip.
3. this is how I installed the kernel:
Make a backup
Download .zip to PC
Transfer .zip to sdcard
Reboot to recovery
Flash
Phone automatically rebooted after install
waited and waited......boot back into recovery. restore by backup.
everything has been done with CWM based recovery. I'm stumped....frustrated to no end......
godzilla61 said:
Thanks Gil, this is exactly what I have done.
1. flashed from 4.03 to WILD-FOR-THE-NIGHT-07052013-d710, had no data....tried to find a fix for that...gave up after trying tweaks to help with the battery issue and no data.
2. Clean install of d710_PAC_JB_4.2.2-v23.0.0_20130719-015400, now have intermittent data, wifi works, blutooth works, flashed Fl24 modem with no apparent improvement in data connectivity, thought after reading a kernel flash might fix issues, here comes the boot loop....flashed smdk4412_p4 waited patiently for 2hrs watching Pacman chasing ghosts.....booted into recovery and ran my backup tried it 2 more times on clean flashs gave up after 5 hrs. By clean I mean wipe/reset, wipe cache, wipe dalvik, install from zip.
3. this is how I installed the kernel:
Make a backup
Download .zip to PC
Transfer .zip to sdcard
Reboot to recovery
Flash
Phone automatically rebooted after install
waited and waited......boot back into recovery. restore by backup.
everything has been done with CWM based recovery. I'm stumped....frustrated to no end......
Click to expand...
Click to collapse
First off...I have had the lzp_4 boot loop on me. I pulled the battery,waited about 2 min. Put it back in and booted to recovery. Then I wiped cache and dalvik. Rebooted and it took off(booted fine). I have no idea why or how, but this worked for me. Now to my main concern. If you came straight from ics to a jb rom I think this is going to cause you issues, if you hadn't been on jb before. I suggest the one - click full restore(it wipes data,so back-up you're internal memory).This will get you're phone partition right for jb. After this. I think you should be able to flash what you want with no problems. I didn't see a problem with how you flashed. Wipe cache and dalvik on the kernal flashes you do.Here's the link for the one -click..
go to linked page and click on download ota at top of page
I would read through the page it sends you to well.Don't forget to thank those guys..Hope this helps.Hit me up if it doesn't.
.http://forum.xda-developers.com/showthread.php?t=2148072
Doing a one click restore worries me, I'm not on sprint any more and worried about losing my flash to my current carrier. Is this a concern I should have since I'm not used to working with odin? I'm more than willing to try another ROM also, I'm not locked into this by any means.....
godzilla61 said:
Doing a one click restore worries me, I'm not on sprint any more and worried about losing my flash to my current carrier. Is this a concern I should have since I'm not used to working with odin? I'm more than willing to try another ROM also, I'm not locked into this by any means.....
Click to expand...
Click to collapse
The carrier should not matter if you are on an E4GT phone. But if your trying to go to a JB ROM, you will need to aupdate to GB** for your phone. For sprint it is GB27. Have you tried RWilco12's repository to see if your carrier is listed? Also QBKing77 has a lot of videos concerning this specific phone. How to flash specific ROMs and upgrading specific build, modems and such. Something has got to work for you.
fitting toryBB
bigmike6200 said:
The carrier should not matter if you are on an E4GT phone. But if your trying to go to a JB ROM, you will need to aupdate to GB** for your phone. For sprint it is GB27. Have you tried RWilco12's repository to see if your carrier is listed? Also QBKing77 has a lot of videos concerning this specific phone. How to flash specific ROMs and upgrading specific build, modems and such. Something has got to work for you.
Click to expand...
Click to collapse
Well now I'm stuck on Sprints 4G boot screen just keeps looping.....WTH.....I've never had a phone be a pain like this....guess I let it kill the battery and see what happens. Recovery is there, not cwm so can't even restore my backup. I'm just frustrated by this phone! Gill, bigmike any idea which way to turn now?
godzilla61 said:
Well now I'm stuck on Sprints 4G boot screen just keeps looping.....WTH.....I've never had a phone be a pain like this....guess I let it kill the battery and see what happens. Recovery is there, not cwm so can't even restore my backup. I'm just frustrated by this phone! Gill, bigmike any idea which way to turn now?
Click to expand...
Click to collapse
What ROM did you flash? Was it ICS or Jellybean? What carrier are you on. That was never revealed.
Never kill the battery. I sed you tried" Wild for the night" and Pac something. Can you get to recovery?
X'ed out the game
Q&A for [ROM] [4.4.4] Paranoidandroid 4.6
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Mobile data still not working on Beta4
I had read that some users were having difficulty with mobile data on beta3, but it was now working after upgrade to beta4... mine still isn't working, any ideas? Screenshot fix is also broken now, and like others, recovery doesn't work. I'm going to reflash recovery and screenshot fix after I get home from work, but I have no idea how to fix mobile data.
Help
Hey guys, can someone help me?
My phone is rooted and the bootloader is unlocked.
What do I have to do next?
I tried to extract the boot.img from the PA Zip and flash it with Flashtool to my Phone.
It says "Done" but when I want to enter the Recovery, the LED goes Blue, but the screen went black.. Nothing more happens.. (I have no recovery Installed yet, I thought the recovery comes with the boot.img)
Passi292 said:
Hey guys, can someone help me?
My phone is rooted and the bootloader is unlocked.
What do I have to do next?
I tried to extract the boot.img from the PA Zip and flash it with Flashtool to my Phone.
It says "Done" but when I want to enter the Recovery, the LED goes Blue, but the screen went black.. Nothing more happens.. (I have no recovery Installed yet, I thought the recovery comes with the boot.img)
Click to expand...
Click to collapse
yes, recovery comes with the boot.img. Maybe You flashed the wrong boot.img? Try flashing it once again. Or Maybe the download of zip was corrupted.
Edit : Found this reading on, maybe it is an issue with the current version. Check this link out.
where is the paranoid setting menu? hybryd setting?
and, beta3 needs lot of time to reboot ~3-5min everytime when I do reboot its normal?
TWRP Manager
I want to Install TWRP Recovery in my Sony Xperia S PA 4.6 BETA4. I downloader the app from Google Play but when I select the install TWRP option my phone name is not in the list. How can I install?
EliasMora said:
I want to Install TWRP Recovery in my Sony Xperia S PA 4.6 BETA4. I downloader the app from Google Play but when I select the install TWRP option my phone name is not in the list. How can I install?
Click to expand...
Click to collapse
Choose "nozomi" from the list. I am sure it's there because I use that app too.
ronin1728 said:
Choose "nozomi" from the list. I am sure it's there because I use that app too.
Click to expand...
Click to collapse
After installation Recovery stills not working. When I push the volume up button the led turns blue but nothing happens, black screen is all I get. And when a select Reboot to recovery in TWRP Manager app the phone only reboots normally
Got bootloop on reboot
I just try to flash the pa_nozomi-4.6-BETA4-20141009 today. Everything seem very nice and smooth until I reboot. I only reboot for first time to flash some mod, then i cant boot up anymore. I can only boot into recovery. I try to wipe all and flash this pa_nozomi-4.6-BETA4-20141009 again and reboot to double check and it still stuck in recovery. I think that a bug.
Now I try to flash older version to keep my phone running, will review later
OK Guys. Sorry for my English...
Here Xperia S LT26i
first install one - two weeks ago 4.6 beta 3 + screen-shot fix. Very nice. In addition indicated errors /no reboot, no gps, while charging not power off/ No have other problems Use gapps modular. Mi first step was dalvik to art /runtime/. Then install CPU master free. I use usually 1300Mhz ondemand mode /battery saving/ but 1700 MHz ej,ej /not battery saving / and uninstall browser and install chrome. /chrome beta always crashed/
yesterday install ota 4.6 beta 4
hah gps, work!!!! , reboot work, camera button work, But not work clocwordmod recovery. Ok, read forum and flash kernel from beta3 /[email protected]/ Reboot, install screen-shot fix. And works fine.
I test this week phone
Nice, Nice job and THX
An question, if not a problem - TRIM supprt /fstrim/ is enabled? Ti. running after boot/rebbot?
of course - 4.6 beta 4 - kernel 4.6 beta3
P.M.
Hy guys - sharp tested gps via Road bike /infact runtastic/ works fine really!
Hsdpa/3g OK, wifi ok.
Sending group texts does not work??
elfede upon
Earphones not detected on PA Rom even on other AOSP roms. please help
Music
Hey guys, does anyone have the same problem?
When I start listening Music via my headphones and minimize the Music App, the music plays trough the speakers for a while and then swiches back to the earphones.
Any Idea what to do? I tried different music players..
gps
works here fine
/also test forum motors /
Problem
Problem at work screenshot In List recent app
Hameedteto said:
Problem at work screenshot In List recent app
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=54210802&postcount=1995
Hi problem with cwm
Thanks for your work
My English is not so good
Update last version but the wing was lost CWM I can do something to get back the CWM
thanks for answering
vic_gen said:
Thanks for your work
My English is not so good
Update last version but the wing was lost CWM I can do something to get back the CWM
thanks for answering
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=55991951&postcount=3267
Speaker failure with nozomi-PA 4.6-BETA4
Does anyone has a problem with the speaker?
I had it now the second time. From one second to the other it will not work. When I restart the phone ist works fine again.
Had the problem ones with Beta3.
If the poblem is already reported just tell me - i can find it by myself
a second problem i liker to report is that the screen brightnes is changing. it goes a little bit darker and lighter.
the rest is very very fine!
thx for your help
Q&A for ||ROM|| JEDI Open Source Project || 4.4.4 || MultiWindow || 10|04
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Not sure this is possible...
First, this is an outstanding job! I am in love with this rom so far, and made an account just to subscribe to this thread. I don't want to miss what you guys have in store!
But, I have a question, many apps on the store that I used to use (artflow, photoshop touch) require a "tablet device". These would work using stock, and worked using stock or Cyanogenmod for Note 2, but somehow that isn't triggering with this rom.
I mean, I'm sticking with this as my daily driver so far, regardless. I just used both those apps a lot.
Thanks for this amazing rom, it breathed new life into my phone!
Oograh said:
First, this is an outstanding job! I am in love with this rom so far, and made an account just to subscribe to this thread. I don't want to miss what you guys have in store!
But, I have a question, many apps on the store that I used to use (artflow, photoshop touch) require a "tablet device". These would work using stock, and worked using stock or Cyanogenmod for Note 2, but somehow that isn't triggering with this rom.
I mean, I'm sticking with this as my daily driver so far, regardless. I just used both those apps a lot.
Thanks for this amazing rom, it breathed new life into my phone!
Click to expand...
Click to collapse
It may be the DPI setting by default but not sure. I would try changing DPI to 480, download apps and put DPI back. You can do this via build.prop or using an LCD density changer app
Sent from my A0001 using XDA Free mobile app
ptmr3 said:
It may be the DPI setting by default but not sure. I would try changing DPI to 480, download apps and put DPI back. You can do this via build.prop or using an LCD density changer app
Sent from my A0001 using XDA Free mobile app
Click to expand...
Click to collapse
That was it! Thank you so much!!!
Galaxy Gear Neo on Jedi 4.4.4
ANy help would be appreciated in getting my Gear Neo to work on this Rom.
Anyone know how to increase the incall volume?
Ptmr3 will have this issue fixed on the next update but I don't want to flash a different temp rom until new update is available.
I like this rom a lot.
Can someone help?
AE74 said:
Anyone know how to increase the incall volume?
Ptmr3 will have this issue fixed on the next update but I don't want to flash a different temp rom until new update is available.
I like this rom a lot.
Can someone help?
Click to expand...
Click to collapse
Normally the temp fix is to push vol down, then volume up when in a call.
kozmo21 said:
Normally the temp fix is to push vol down, then volume up when in a call.
Click to expand...
Click to collapse
Tried that already.
I have installed exdialer app. This app works if I am calling but not when receiving the call.
Anyone have any issues with the loss of data? Been running flawless for me up until the last 2 days. A reboot fixed it the first and second time but last night no matter what I did I could not get data back. Had to revert back to CM11.. if anyone has the reason/solution I'd love to go back.. I'll try to ready the thread fully if I get time today at work. Just seeing if anyone else experienced the same thing
Sent from my SGH-T889 using XDA Free mobile app
Is this ROM compatible with the AT&T version of the Note 2 (i317)? I've read good things about the ROM and am eager to try it, but would prefer to know beforehand.
Vibration doesn't work for me
Sent from my SGH-T889 using XDA Premium 4 mobile app
ProfeKarma said:
ANy help would be appreciated in getting my Gear Neo to work on this Rom.
Click to expand...
Click to collapse
Anybody??
ProfeKarma said:
Anybody??
Click to expand...
Click to collapse
I am pretty sure that you need a Touchwiz rom to have compatibility, otherwise it would be compatible with all android phones and not just Samsung Galaxy variants.
Hmm cleaned flashed the ROM twice now with gapps and cannot for the life of me get Bluetooth to work .. Tried to connect to car Bluetooth with the right passcode but it just will not connect
Edit: OK as long as the device doesn't require a passcode it will connect hmm how strange
phone restarts
Anyone have this problem? Phone keeps restarting when I try to change a contacts picture on the native contacts app (people app)
Wiped cache and dalvik doesn't solve the problem
edit: phone also restarts when i change wallpaper/lockscreen wallpaper but the changes to wallpaper and lockscreen wallpaper does stick, but the contacts picture changes doesn't stick.
Since having xposed installer enabled , and only greenify module checked on .. For some reason if I boot into recovery from the power menu it will boot loop on twrp 2.8.0.1.. Then will have to Odin and clean flash all over again .. 4 times now and still can't figure out why that happens .. Maybe xposed installer is the cause? So I decided to turn off the phone then hold up vol up power and home key to get to recovery but it loads the twrp screen then reboots the OS .. Not sure just what to do or about recovery.. Also made a full backup and changed cache, system, and data to f2fs format and restored to that system .. Could that be an issue as well?? Anyone please give an insight to this would be greatly appreciated
Edit: also running latest CM Agni kernel to support f2fs format
LaZiEebOi said:
Since having xposed installer enabled , and only greenify module checked on .. For some reason if I boot into recovery from the power menu it will boot loop on twrp 2.8.0.1.. Then will have to Odin and clean flash all over again .. 4 times now and still can't figure out why that happens .. Maybe xposed installer is the cause? So I decided to turn off the phone then hold up vol up power and home key to get to recovery but it loads the twrp screen then reboots the OS .. Not sure just what to do or about recovery.. Also made a full backup and changed cache, system, and data to f2fs format and restored to that system .. Could that be an issue as well?? Anyone please give an insight to this would be greatly appreciated
Edit: also running latest CM Agni kernel to support f2fs format
Click to expand...
Click to collapse
u might want to try to update twrp 2.8.1.0, I kept having boot loops at every reboot and had to pull battery. I dont know if it might help u, but it did fix the boot loops i kept having.
How do I turn off multi window? I keep getting a split screen with out an option to close one of the screens. Everything from woot to Amazon app.
I have installed Jedi Master 18 but the air menu function wills pen isn't working.
Sent from my SGH-T889 using XDA Free mobile app
I got a question ( tried the search function...didn't work). Sometimes when my phone goes to sleep, whether I lock it or it locks itself. It won't wake up... Tried the home button and power button and they won't wake it up from its deep sleep. The only thing that works is to pull the battery and that's a pain in the butt cause of my otter box case I have to take apart 2-4 times a day....love this rom but if I can't get this issue fixed I'm going back to liquid rom...thx in advance
Sent from my SGH-T889 using XDA Premium 4 mobile app
Q&A for [ROM][SM-T900] CyanogenMod for Tab Pro 12.2 SM-T900 (v2wifixx)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][SM-T900] CyanogenMod for Tab Pro 12.2 SM-T900 (v2wifixx). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Rooting Tab Pro 12.2 with last firm done!
arcadia2uk said:
For rooting the latest firmware, did you use the CF-Auto-Root from the main site, marked KOT49H.T900XXUANB5, or a new one made for the KOT49H.T900UEUANI1? If the latter, would you mind posting a link to a T900UEUANI1 compatible version?
Click to expand...
Click to collapse
Don't needed. You can root the normal cf-auto-root with latest sock without problem.
After we pm chat last days about rollback to T900UEUAND4 as unique possibility for rooting, i decided to do a last try before that, and luckily works perfect:
-just did a factory reset to restore from B3 recovery i been trying to prev installed T900UEUANI1 stock, wipe caché with stock recovery, odined cf-auto-root and voilá, just rooted!
No need to do the old B3-rollback-prior-D4 method now. Just a normal auto-root with no hassling.
temp maybe?
chhaggerty said:
It sounds like you maybe having a "Sleep of Death" (SOD) issue. The T520 and P900 have had similar problems. I will out of town until Monday but I'll do some research and hope to have a solution soon.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
crpalmer said:
There is a deadlock in Samsung's code triggered by the CPU boost driver. Look in the t520 device repo for the commit that disables it (actually probably 2 commits because I removed some functionality that doesn't make sense for this processor).
Click to expand...
Click to collapse
Dauntless said:
Device: SM-T900
Android: 4.4.2 (Stock, unrooted)
Kernel: 3.4.39-2534013
When putting the tablet into sleep mode, it will automatically shut itself down. When I try to turn it back on, the tablet will only do so after I plugged in the charger. The battery itself is fully charged.
I've updated to the latest available firmware version that's available to me. I couldn't find any list of known issues, so I'm wondering if this is a common problem and if I should return my tablet?
Click to expand...
Click to collapse
Same here. It seems that the problem maybe is temperature: after some time charging it gets really hot and maybe can't awake from that and need rebooting.
I've disabled the magnet sensor vía 3rd app to off the close-lid functionality but don't improve the problem.
Here in summer the room gets to +30°c and the Tab ups to almost 65°c when it gets hot!
Maybe it just reach the temp threshold and self shutdown, or intend that not letting awake.
Perhaps CM11 build here charges battery too fast, with higher voltage than allowed and provoque overheating. I mean, i really feels that it's charging real fast..
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
lingarajug said:
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Posted update last night, check it out
Thanks, btw, i was able to use ODIN to get a good version of TWRP and the ROM installed smoothly. I have encountered a few small bugs but nothing to report that is new. I noticed the "sleep of death" I think you are referring to, deep sleep resulting in a manual reboot to wake up. I have noticed my bluetooth disconnects and reconnects every few minutes during deep sleep..not sure why. will report back. Thanks SO SO much for the development, i love it, so sick of the green and blue and the settings tabs on this stock OS disgust me. I am curious tho, am I the only one who noticed significant slowdown and lag compared to stock? I do not put a lot of stock in benchmarks (skewed toward uncle sammy) but they also showed big slowdown....just my very humble and grateful early experiences. Thanks again.
total reflashing needed?
chhaggerty said:
Posted update last night, check it out
Click to expand...
Click to collapse
Well thanks, but,i don't see a flashing update but an entire 221MBs rom to flash..
Can you post just the little update file , if there's any, to flash above the installed rom?
I don't want to install rom, apps and config all over again.
Thanks!
-----
lingarajug said:
Well currently its winter and cold. My tab was cool but it does not respond after deep sleep unless i reboot. Dev said he will look into it and i will wait. Not sure if temp is cause as mine was not definitely not hot.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
Yes you are right, i'd tried again and it SODs no matter what temp are. A shame.
-----
arcadia2uk said:
For rooting the latest firmware, did you use the CF-Auto-Root from the main site, marked KOT49H.T900XXUANB5, or a new one made for the KOT49H.T900UEUANI1? If the latter, would you mind posting a link to a T900UEUANI1 compatible version?
Click to expand...
Click to collapse
Well there's a problem right now, seems that this rom prevent to enter recovery.., this is what happen to me:
Reboot from Android with 'reboot to recovery' option and when the TWRP splash logo shows it enter in a bootloop always to this instance that TWRP logo appears.
Then i just installed the good old UAND4 rom and it works fine.
Maybe i shouldn't go to recovery direct from android to prevent bootloop happen and try to go the normal way from boot.
Don't know, maybe I'll try some day.., or maybe better wait to Android L comes to us.
Please advice all that stuff in the respective threads, i can't.., cause' these 'noobs-wait-to-10-posting-before' rules..
Greetings.
bertoxo said:
1. Can you post just the little update file , if there's any, to flash above the installed rom?
2. Yes you are right, i'd tried again and it SODs no matter what temp are. A shame.
3. Well there's a problem right now, seems that this rom prevent to enter recovery.., this is what happen to me:
Click to expand...
Click to collapse
1. You can "dirty"-flash (install w/o wiping) the new ROM over the old one - nothing to re-install - if you wish you could extract the kernel (boot.img) and flash it by Flashify
2. There haven't been reported any SOD issues after flashing chhaggerty's latest ROM version
3. I have had no issues with with TWRP after having flashed the KOT49H.T900UEUANI1 - I just assume that some parts of the Firmware, not touched by cm, has been improved (but since this is WIFI only, it might not be the case for a non phone device) why I preferred to make the update.
arcadia2uk said:
1. You can "dirty"-flash (install w/o wiping) the new ROM over the old one - nothing to re-install - if you wish you could extract the kernel (boot.img) and flash it by Flashify
2. There haven't been reported any SOD issues after flashing chhaggerty's latest ROM version
3. I have had no issues with with TWRP after having flashed the KOT49H.T900UEUANI1 - I just assume that some parts of the Firmware, not touched by cm, has been improved (but since this is WIFI only, it might not be the case for a non phone device) why I preferred to make the update.
Click to expand...
Click to collapse
1- but dirty flashing the update full rom performs well?
1.2- only the boot.img is needed for update?
3- have you tried the reboot-to-recovery option from android?
Thanks.
bertoxo said:
1- but dirty flashing the update full rom performs well?
1.2- only the boot.img is needed for update?
3- have you tried the reboot-to-recovery option from android?
Thanks.
Click to expand...
Click to collapse
The changes done between the two versions (99% sure) was only some modifications in the kernel-code. Why flashing the kernel only should be fine, it will resolve the SOD and also make it run cooler. But if you wish you can also dirty-flash. However, cover your bases with a full back-up.
No issues at all with the reboot to recovery option
arcadia2uk said:
The changes done between the two versions (99% sure) was only some modifications in the kernel-code. Why flashing the kernel only should be fine, it will resolve the SOD and also make it run cooler. But if you wish you can also dirty-flash. However, cover your bases with a full back-up.
No issues at all with the reboot to recovery option
Click to expand...
Click to collapse
Can you give me the boot.img update only to try (5MBs)?
220MBs in the posted download site go sooo sloow on any server..
Thanks a lot!
bertoxo said:
Can you give me the boot.img update only to try (5MBs)?
220MBs in the posted download site go sooo sloow on any server..
Thanks a lot!
Click to expand...
Click to collapse
HERE it is
unzip the downloaded file
place boot.img on your SD
use Flashify to flash the kernel
after this I believe flashify will boot you up in recovery, just reboot and you should be good to go.
Just remember to make a back-up for just in case...
HERE it is
unzip the downloaded file
place boot.img on your SD
use Flashify to flash the kernel
after this I believe flashify will boot you up in recovery, just reboot and you should be good to go.
Just remember to make a back-up for just in case...
Click to expand...
Click to collapse
Thanks!
Installed boot.img and works flawlessly. Now i can back using lid cover again and no more hangs.
I hope they can solve the auto-rotate thing next time.
flashing screen, powering down...
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
spk99 said:
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
Click to expand...
Click to collapse
My guess is that gaming need more power, why I would stop greeify and reset the governor to interactive while gaming. But other than that I have no ideas, as I haven't heard of this problem before.
This ROM is fantastic! Smooth, fast, responsive and just as described...big thanks.
spk99 said:
I have twrp 2.8, v2 of our Cyanogenmod, set processor to on demand as suggested...
Still when I play games like CoC and others, if I am not plugged in even with a lot of bat% left, I get a flashing screen and occasionally my tab just decides it needs to shut off.
Any thoughts on what to do? I have greenify and Xposed installed too...
It pretty frustrating.
THANKS GUYS!!
Click to expand...
Click to collapse
I don't know if you noticed, but chhaggerty just released a version 3, maybe this will work as there has been some work on the governors.
chhaggerty said:
New update see OP
Click to expand...
Click to collapse
Can i use the 4.4.4 GAPPS instead of 4.4.3 you are posting?
arcadia2uk said:
Thanks for another quality update, notably when reading how other cm11 exynos versions always seems to break something. With your T-900 cm11, I have never had any issues. The latest version is still running smooth, the changes in the CPU governor will probably allow for better battery life with the added conservative setting. However, I don't know what trade-off this will have on performance.
Click to expand...
Click to collapse
Maybe they start to use the big.LITTLE behavior of the Exynos, instead of ever using just the full power a15 cluster (battery eater).
I've haven't tried it but since it's a 4.4.4 rom they should work fine.
Error flashing ROM
Hi guys,
I get this error message when I try to flash CM11:
"Can't install this package on top of incompatible data. Please try another package or run a factory reset"
This is a brand new rooted SMT-900 Tab Pro 12.2". Here's some notes:
- I received the error using V1, V2, and V3, all receive the error message
- I downloaded two copies of v3 from two separate mirrors (CA and AZ), both receive the error message
- I did a factory reset and still received the error message
- Wiped davlik/cache/system partitions
- Tried on TWRP 2.7 and 2.8, both receive same error message
- All I have done to this tablet is root it, install TWRP, and create one backup
Any thoughts? I can try using CWM if someone can give me a quick overview of how to install it and remove TWRP (or keep TWRP).
[Q&A] [11/12/14]{CM12-Unofficial} T0lteXX Work Fine Service Data Networks( Baseban O
Q&A for [11/12/14]{CM12-Unofficial} T0lteXX Work Fine Service Data Networks( Baseban OK)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [11/12/14]{CM12-Unofficial} T0lteXX Work Fine Service Data Networks( Baseban OK). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Works Great
This works great, however doesn't seen to want to charge, LTE access works great. awesome work in progress
Which updater-script do I need for N7105?
EXTREMAborgis said:
Which updater-script do I need for N7105?
Click to expand...
Click to collapse
The one that ends with tolte-i9100
Overstuffedcow said:
The one that ends with tolte-i9100
Click to expand...
Click to collapse
I used the other one and it works.
SHV-E250S
Tried flashing this one on my Note II SKT Korean Model but no luck.
The rom was successfully flashed but it doesn't boot
-wiped dalvik, cache, system, data
-flashed the rom with TWRP 7.8.1.0 t0lte
-wiped dalvik cache system data again
-just hangs on samsung logo and it rebooted and hangs again
I got signed converter to convert the kernel but still no luck.
is it compatible with korean note 2?
Update
Overstuffedcow said:
This works great, however doesn't seen to want to charge, LTE access works great. awesome work in progress
Click to expand...
Click to collapse
After modifying the build.prop to have the correct model number and doing a factory reset, the charging is no longer an issue. I did disable android debugging, because it always seems to interfere with file transfers from my computer.
I case anyone asks, I am on the 4.1 jellybean bootloader, and using AT&T note 2 with Straight talk. I can't comment on calls in or out right now as I'm letting the phone charge, this is only a back up (maybe not for long) Edit: no calls in or out
Overstuffedcow said:
After modifying the build.prop to have the correct model number and doing a factory reset, the charging is no longer an issue. I did disable android debugging, because it always seems to interfere with file transfers from my computer.
I case anyone asks, I am on the 4.1 jellybean bootloader, and using AT&T note 2 with Straight talk. I can't comment on calls in or out right now as I'm letting the phone charge, this is only a back up (maybe not for long) Edit: no calls in or out
Click to expand...
Click to collapse
Since December 12 update, everything works accept my banking app. Great work and have a great day.
1 bug ☺ when headphone is connected and volume up, music would mute ☺
hope you find a way to fix it ?
Good job !! does not work the camera and GPS when fix?
Overstuffedcow said:
Since December 12 update, everything works accept my banking app. Great work and have a great day.
Click to expand...
Click to collapse
12/18 Update.
Things run very smooth. I still had to flash over the shift-lollipop.zip kernel posted earlier in this forum because the phone would not go past Samsung logo. Once i flashed the other kernel, all was well. I changed the build.prop for my preferred DPI 245 and my model i317. Everything works for me. Great work.
12/24 update
Overstuffedcow said:
12/18 Update.
Things run very smooth. I still had to flash over the shift-lollipop.zip kernel posted earlier in this forum because the phone would not go past Samsung logo. Once i flashed the other kernel, all was well. I changed the build.prop for my preferred DPI 245 and my model i317. Everything works for me. Great work.
Click to expand...
Click to collapse
I appreciate the update with the angi kernel, however it still won't boot with it. I'm still having to flash the shift kernel for it to work. I don't know if it has to do with my 4.1.2 bootloader or not. In either event, the builds just keep getting better. Thanks for your hard work.
Overstuffedcow said:
I appreciate the update with the angi kernel, however it still won't boot with it. I'm still having to flash the shift kernel for it to work. I don't know if it has to do with my 4.1.2 bootloader or not. In either event, the builds just keep getting better. Thanks for your hard work.
Click to expand...
Click to collapse
I'm not sure what happened, it tried some other Lollipop ROMS, but always come back to this. This time when I flashed the last build posed by Wilson3q, everything works great. Great work