Related
Update 180914:
Always believe something wonderful is just going to happen.
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE:
IF YOU STUCK AT MI ACCOUNT LOGIN, make sure you flashed permissiver
If the device says your device has mi account locked, then pull simcard out and reboot to complete the setup.
If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
For Chinese users you can contact me via Coolapk.See my signature.
v1:
Initial release
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
This for Aonly or A/B?
how about huawei device？
山海蓝精灵 said:
how about huawei device？
Click to expand...
Click to collapse
Idk, maybe need 8.1 vendor huawei device
fxsheep said:
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
v1:
Initial release
arm builds WIP
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
Click to expand...
Click to collapse
is volte working?
fxsheep said:
WARNING:I‘m not responsible for any consequences at all.This is an OEM rom ported from Redmi phone so it may cause wrong behaviors including partition overwritting and may brick your phone or break hardwares.I strongly recommend you take a completely full backup of your device and know how to recovery firmwares in case of any problems.
This is still in early stage and should be normal if some features are broken.
Working on Qualcomm fully-Trebled deivces.
Maybe working on other platfrom fully-Trebled deivces.
8.1 vendor (vndk27) should be needed.
Bugs:
Light HAL(Brightness acting strange, this is a MIUI traditional)
SELinux
Credits:
@erfanoabdi
Install for A-only:
1.enable Treble ,flash a fully-trebled 8.1 rom
2.Extract the .7z to your TWRP backup folder (/.../TWRP/BACKUPS/$(yourserialnumber)/
3.Restore MIUI10 /system with TWRP
4.flash two patch zip
5.wipe data,flash fbe_disabler and Permissiver (from tools) if needed for your device.
6.Reboot.
Normally it will boot to bootanimation.If it doessn't pass bootanim then take logs with
adb logcat > logcat.txt via PC.
NOTE: If you're stuck at logo , please make sure you can boot sGSI
Telegram Group:
https://t.me/funtouchosp
v1:
Initial release
arm builds WIP
Download
GDrive https://drive.google.com/open?id=1hyyErzDrl-cre13AX4_A5aSAbRHurZvU
Click to expand...
Click to collapse
AB support please!!!
wmfanboy25 said:
AB support please!!!
Click to expand...
Click to collapse
I don't have A/B devices ,so I don't get familiar with how A/B devices work,also this MIUI port is from an Aonly device, converting Aonly to A/B image is more difficult than vice versa
Global or Chinese?
Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).
[email protected] said:
Bootloop on Xiaomi Redmi Note 4 SD ( Mido ).
Click to expand...
Click to collapse
take log or try clean flashing
Im flashing now to op5t and will report back soon.
Status:
1. Booted
2. Stucked in Sign in to your Mi Account, even if i disabled use cloud sync. I see is Couldn't check device security info.
Does this sgsi has arb feature?
Stuck at mi account log in. Couldn check device status
fxsheep said:
...
Click to expand...
Click to collapse
I want try at MiPad 4. It is arm64, aonly.
What do u think?
Can this be flashed on redmi note 3 pro (kenzo)?
other dead Rom
fountoutch Dead
Oos Dead
miui 10 Dead
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
ebautista said:
Im flashing now to op5t and will report back soon.
Status:
1. Booted
2. Stucked in Sign in to your Mi Account, even if i disabled use cloud sync. I see is Couldn't check device security info.
Click to expand...
Click to collapse
yogasetyaadi said:
Stuck at mi account log in. Couldn check device status
Click to expand...
Click to collapse
Reboot and retry, so many people booted
dcduartee said:
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
Click to expand...
Click to collapse
Mount vendor in twrp
dcduartee said:
I tried flashing this on the huawei p20 lite and I can't flash the patch 2. Gives error 1
Click to expand...
Click to collapse
Vendor mounted?
How to flash Quack Phh-Treble arm64-a/b GSI on the Redmi Note 9 (MERLIN)
All the development credits for this GSI go to @phhusson. For more information head over to his thread.
And @nielsync for the guide on Redmi 9(This method worked on my redmi note 9)
Bugs:
Auto brightness
Headphone jack
Can't test VoLTE so likely not working
What is working:
Everything else
I’m not a developer so you should report bugs at phhusson's treble experimentations issues tracker on GitHub.
WARNING:
I am not responsible for any damage to your smartphone.
All your data will be deleted during the process so a backup is essential
Requirements:
1) Unlocked bootloader here
2) Latest Android platform tools here
3) MIUI stock recovery (maintain it to be able to boot fastbootd)
4) Xiaomi fastbootd drivers here
5) I flashed Phh-Treble AOSP 10.0 v222 system-quack-arm64-ab-gapps here (download the file system-quack-arm64-ab-gapps, unzip it, and rename it as system.img)
6) vbmeta.img here
Steps:
1) Reboot your phone in fastboot mode (reboot and hold volume -)
Run the commands below within the platform-tools folder(copy vbmeta.img and system.img to platform tools folder)
2) fastboot reboot fastboot (to boot into fastbootd mode)
3) fastboot flash system system.img
4) fastboot erase userdata
5) fastboot erase cache
6) fastboot flash vbmeta vbmeta.img
7) fastboot reboot
Notes:
Phh-Treble has root by default which is a plus. Due to the Redmi 9's partition structure the system is effectively read only.
The following video shows the procedure on the Redmi 9, is the same on Redmi Note 9 (video in spanish sorry)
Reserved
What is your telegram user? I'd like to talk about the credits stuff, because I developed the guide for merlin and posted it in group. This is just an edited copy, reported.
Also, you messed up the commands.
+ the video posted below is of Lancelot and not even merlin.
Is it smoother than Miui and gives more performance??
Yxnq_Param said:
What is your telegram user? I'd like to talk about the credits stuff, because I developed the guide for merlin and posted it in group. This is just an edited copy, reported.
Also, you messed up the commands.
+ the video posted below is of Lancelot and not even merlin.
Click to expand...
Click to collapse
Hello bro, @nielsync make this guide for Redmi 9 lancelot (serch in Redmi 9 forum).
I just tried the same on my Redmi Note 9 and it worked. I have the redmi 9 and the redmi note 9, so I was able to test the method.
About the YouTube video, I am the owner of the channel, and in the channel is the same method (very similar) for the redmi note 9s and redmi 9.
So these types of procedures are not new to me.
And about the commands, none are missing.
I'm sorry I did the guide before you.
Have a great day.
Mahmoud_helal79 said:
Is it smoother than Miui and gives more performance??
Click to expand...
Click to collapse
It works excellent, only the bugs mentioned.
Do you have a link for the Merline Telegram group? I can't seem to find it
Has it fix games lag?
I think this should be posted in ROM forum, isn't it?
Andres Videla said:
It works excellent, only the bugs mentioned.
Click to expand...
Click to collapse
Btw can we fix the Headphones jack bug with the same way they fixed it in Redmi 9??
Andres Videla said:
Hello bro, @nielsync make this guide for Redmi 9 lancelot (serch in Redmi 9 forum).
I just tried the same on my Redmi Note 9 and it worked. I have the redmi 9 and the redmi note 9, so I was able to test the method.
About the YouTube video, I am the owner of the channel, and in the channel is the same method (very similar) for the redmi note 9s and redmi 9.
So these types of procedures are not new to me.
And about the commands, none are missing.
I'm sorry I did the guide before you.
Have a great day.
Click to expand...
Click to collapse
I'm happy you guys found my guide helpful and this is simply a copy paste of it. Me and the guys over at the Redmi 9 forums tried many times until we booted and so I came up with those steps. They can be used to flash a GSI on basically any device with logical partitions including A/B devices with two slots by flashing the system on both. A thanks does me no harm
nielsync said:
I'm happy you guys found my guide helpful and this is simply a copy paste of it. Me and the guys over at the Redmi 9 forums tried many times until we booted and so I came up with those steps. They can be used to flash a GSI on basically any device with logical partitions including A/B devices with two slots by flashing the system on both. A thanks does me no harm
Click to expand...
Click to collapse
Thanks bro, You mame is in the first post. Thanks again.
With Auto brightness u mean u can't adjust brightness its locked on some certain level or its locked on auto brightness?
Mahmoud_helal79 said:
Btw can we fix the Headphones jack bug with the same way they fixed it in Redmi 9??
Click to expand...
Click to collapse
someone tried this?
mattheus10 said:
someone tried this?
Click to expand...
Click to collapse
I didnt flash the rom on my device yet but i just want to know if thise bugs are fixable or no
If someone flashed it and wanna try, according to @pvdeejay just download any terminal app on your phone and run the following:
Code:
su
setprop persist.sys.overlay.devinputjack true
reboot
Mahmoud_helal79 said:
I didnt flash the rom on my device yet but i just want to know if thise bugs are fixable or no
If someone flashed it and wanna try, according to @pvdeejay just download any terminal app on your phone and run the following:
Click to expand...
Click to collapse
i tried it, the fix for headphones i s an app (lesser audioswitch) and it works on redmi note 9
---------- Post added at 04:27 PM ---------- Previous post was at 04:19 PM ----------
Mahmoud_helal79 said:
I didnt flash the rom on my device yet but i just want to know if thise bugs are fixable or no
If someone flashed it and wanna try, according to @pvdeejay just download any terminal app on your phone and run the following:
Click to expand...
Click to collapse
oh i just tried the code and now it works perfectly
Mahmoud_helal79 said:
I didnt flash the rom on my device yet but i just want to know if thise bugs are fixable or no
If someone flashed it and wanna try, according to @pvdeejay just download any terminal app on your phone and run the following:
Code:
su
setprop persist.sys.overlay.devinputjack true
reboot
Click to expand...
Click to collapse
that was easy, thanks
Fail - remote this partiton doesn't exist
good morning to all,
I am writing to you because I have a problem that I cannot solve.
I have a Xiaomi Redmi Note 9 ( miui V11.0.7.0.QJOEUOR ) not S not pro just note 9
- my bootloader is unlocked
- I followed to the letter everything that was indicated
- latest android platform tools
- I haven't touched the recovery
- I have installed the xiaomy fastbootd drivers by following the procedure described above.
- I do very exactly the fastboot procedure
invariably and whatever the rom gsi (quack or havoc ) in ARM64 A/B I always have the same mistake:
write system (etc)
...
...
FAIL
REMOTE THIS PARTITION DOESN'T EXIST
if anyone can help me I don't understand
thank you in advance
Great that there is at least GSI for this phone.
Is there a default camera app? Or which are you using and what about the quality?
belphegor75 said:
good morning to all,
I am writing to you because I have a problem that I cannot solve.
I have a Xiaomi Redmi Note 9 ( miui V11.0.7.0.QJOEUOR ) not S not pro just note 9
- my bootloader is unlocked
- I followed to the letter everything that was indicated
- latest android platform tools
- I haven't touched the recovery
- I have installed the xiaomy fastbootd drivers by following the procedure described above.
- I do very exactly the fastboot procedure
invariably and whatever the rom gsi (quack or havoc ) in ARM64 A/B I always have the same mistake:
write system (etc)
...
...
FAIL
REMOTE THIS PARTITION DOESN'T EXIST
if anyone can help me I don't understand
thank you in advance
Click to expand...
Click to collapse
Are you sure you are in fastbootd mode??
Driver installation give no error in windows 10?
RalphMalph said:
Great that there is at least GSI for this phone.
Is there a default camera app? Or which are you using and what about the quality?
Click to expand...
Click to collapse
It comes with default android Camera app (the one in any AOSP-based rom) its stable, but quality is avarage (not good, not bad).
I also tested GCam (version published in this same forum by another user) which is relatively stable and has better quality but its slower.
Hi y'all
I know that fastboot roms can easily be flashed with the miflash tool but recovery roms can only be flashed with twrp or another custom recovery. So how do I flash a recovery rom for the pad 5 when there's no custom recovery? I wanted to test out the MIUI 13 beta but I can't install it via miflash or the system updater since I'm on global rom and not china rom.
Marlonese said:
Hi y'all
I know that fastboot roms can easily be flashed with the miflash tool but recovery roms can only be flashed with twrp or another custom recovery. So how do I flash a recovery rom for the pad 5 when there's no custom recovery? I wanted to test out the MIUI 13 beta but I can't install it via miflash or the system updater since I'm on global rom and not china rom.
Click to expand...
Click to collapse
Run an GSI on your Mi Pad 5
To run an GSI on your Mi pad 5 : Unlock bootloader Download an arm64 AB gsi: https://forum.xda-developers.com/f/treble-enabled-device-development-a-ab-roms.7260/ I used system-roar-arm64-ab-vndklite-vanilla.img by Phh Download vbmeta.img from...
forum.xda-developers.com
mikefnz said:
Run an GSI on your Mi Pad 5
To run an GSI on your Mi pad 5 : Unlock bootloader Download an arm64 AB gsi: https://forum.xda-developers.com/f/treble-enabled-device-development-a-ab-roms.7260/ I used system-roar-arm64-ab-vndklite-vanilla.img by Phh Download vbmeta.img from...
forum.xda-developers.com
Click to expand...
Click to collapse
Anybody ask for GSI
I take the time to provide a useful link for someone who is too busy to search for themselves and get an aggressive sarcastic reply. C'est la vie.
When you flash the stock ROM with miflash tool, the stock recovery will also be flashed. There are tools that can extract or dump the recovery.img file from fastboot ROMs but I don't know if there is one for Xiaomi.
I asked around and was told it's not possible to flash an internal rom without a custom recovery.
So here's a MIUI 13 Chinese Stable Fastboot ROM:
https://bigota.d.miui.com/V13.0.3.0.RKXCNXM/nabu_images_V13.0.3.0.RKXCNXM_20211228.0000.00_11.0_cn_1d92f2dc98.tgz
Any idea how to flash this?
I installed the latest adb/fastboot packages from google, unlocked my Mi pad, booted into fastboot and then used the flash_all.bat file from the fastboot zip which runs through completely until I get a bootloop on MIUI logo.
underlines said:
So here's a MIUI 13 Chinese Stable Fastboot ROM:
https://bigota.d.miui.com/V13.0.3.0.RKXCNXM/nabu_images_V13.0.3.0.RKXCNXM_20211228.0000.00_11.0_cn_1d92f2dc98.tgz
Any idea how to flash this?
I installed the latest adb/fastboot packages from google, unlocked my Mi pad, booted into fastboot and then used the flash_all.bat file from the fastboot zip which runs through completely until I get a bootloop on MIUI logo.
Click to expand...
Click to collapse
The .tgz files are fastboot roms from xiaomi. There for use MiFlash Tool.
underlines said:
So here's a MIUI 13 Chinese Stable Fastboot ROM:
https://bigota.d.miui.com/V13.0.3.0.RKXCNXM/nabu_images_V13.0.3.0.RKXCNXM_20211228.0000.00_11.0_cn_1d92f2dc98.tgz
Any idea how to flash this?
I installed the latest adb/fastboot packages from google, unlocked my Mi pad, booted into fastboot and then used the flash_all.bat file from the fastboot zip which runs through completely until I get a bootloop on MIUI logo.
Click to expand...
Click to collapse
You can flash this with the official Mi flash Tool. You must extract the tgz File to folder. Then flash with the Tool and then have fun.
is possible to flash the new daily beta of android 12 from china rom? are available only in recovery format... can i convert to fastboot rom or install it without a modified recovery? thanks
Xiaomi Pad 5 (nabu) China Fastboot & Recovery ROM | XiaomiROM.com
Xiaomi Xiaomi Pad 5 (nabu) China official ROM, include stable, weekly and beta MIUI firmware which can be updated with Recovery and Fastboot (need mi …
xiaomirom.com
convert system-XX.dat to system_spare.img
fastboot flash 'partition name' 'filename'
mark332 said:
convert system-XX.dat to system_spare.img
fastboot flash 'partition name' 'filename'
Click to expand...
Click to collapse
How can i do it?
vuoshinotizy said:
is possible to flash the new daily beta of android 12 from china rom? are available only in recovery format... can i convert to fastboot rom or install it without a modified recovery? thanks
Xiaomi Pad 5 (nabu) China Fastboot & Recovery ROM | XiaomiROM.com
Xiaomi Xiaomi Pad 5 (nabu) China official ROM, include stable, weekly and beta MIUI firmware which can be updated with Recovery and Fastboot (need mi …
xiaomirom.com
Click to expand...
Click to collapse
You can't flash it but you can update to china weekly update via Updater app with magisk module.
vuoshinotizy said:
How can i do it?
Click to expand...
Click to collapse
first you have to check what's inside recovery ROM, if it's a payload.bin you have to extract it. if system_new.dat you have to convert it to spare image (tool available on forum) if you have all the images you can use this tool https://forum.xda-developers.com/t/script-auto-fastboot-flash-all-for-any-device.4467687/
StormLouis said:
You can't flash it but you can update to china weekly update via Updater app with magisk module.
Click to expand...
Click to collapse
Which module
Edit: Never mind found it thank you.
Half Alive said:
Which module
Edit: Never mind found it thank you.
Click to expand...
Click to collapse
Telegram
t.me
StormLouis said:
Telegram
t.me
Click to expand...
Click to collapse
Already installed. You have to install this modulo and download the rom version of the beta. Install it manually throw the three dot in the update miui window and upgrade to the closed beta. I already tried it but i think at the moment the china 11 is better
Half Alive said:
Which module
Edit: Never mind found it thank you.
Click to expand...
Click to collapse
Please share the module link! Telegram link is not accessible.
StormLouis said:
Telegram
t.me
Click to expand...
Click to collapse
Can't open the telegram link, can u provide another source?
Sorry for revive but which module is it?
Hi, can someone upload the boot.img of MIUI 13.0.1.0 RKXMIXM (Global Stable)? I need it for Magisk.
Please study Magisk 24.1 first ..... installation instructions are given !
The boot.img needed is in the firmware or ROM of your phone.
xabu said:
Please study Magisk 24.1 first ..... installation instructions are given !
The boot.img needed is in the firmware or ROM of your phone.
Click to expand...
Click to collapse
I know, that's why I need the boot.img.
Can't you download your own stock ROM? Or .....?
Is there no way to mount your phone to a PC?
Xiaomi-MIUI backup
If you have a non-rooted Xiaomi phone you can get better results by extracting data from an MIUI backup than you would get using a classic 'full co...
forensic.manuals.mobiledit.com
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
ChessPiece said:
Hi, can someone upload the boot.img of MIUI 13.0.1.0 RKXMIXM (Global Stable)? I need it for Magisk.
Click to expand...
Click to collapse
Patched global MIUI 13 boot
Search in telegram group "Xiaomi pad 5 discussion", I uploaded patched boot there or PM me @Shirubyo
Dunno why I can't see attached files here
You should really learn to use XDA properly, or even learn how to Google properly, instead of asking questions like this.
You can easily download the Fastboot ROM from plenty of sources. Inside the fastboot ROM, you'll find the boot.img.
How to install Xiaomi.eu ROM for Xiaomi 13 Pro
Steps to install xiaomi.eu ROM for first time from China ROM (All your data and files on internal storage will be deleted!)
- Unlock your bootloader by Mi Unlock tool https://en.miui.com/unlock/
- Download our ROM zip file DEV or STABLE (from mirror)
- Unpack downloaded zip file in the PC (WinRAR is recommended)
- Reboot your device to fastboot mode (press volume down + power)
- Connect to PC via original USB cable
- Run fastboot installation script as administrator from unpacked zip according your PC operating system
- first_install_with_data_format - with data wipe, if you're flashing Xiaomi.eu ROM for the first time or downgrading.
- update_rom - without data wipe, if you're updating from an older Xiaomi.eu ROM.
- After reboot it is done (first boot may take up to 10min)
Update guide on the video
Update via OTA:
When TWRP will be available, next updates will be downloaded via OTA and flashed in TWRP
Enjoy..
AWESOME many thanks!
Installed 1st attempt and running perfectly so far.
i like fastboot rom than twrp rom @@
empty.cad said:
i like fastboot rom than twrp rom @@
Click to expand...
Click to collapse
Hybrid ROMs: The End of Recovery/Fastboot ROMs
During this Chinese New Year holidays break from building ROMs, we could put some time into research and have developed a new format for our ROMs. We are proud to announce the Hybrid ROMs. Why "Hybrid"? Well, because those ROMs are both Recovery ROMs and Fastboot ROMs, all in the same package...
xiaomi.eu
it can be flashed via fastboot or recovery.
one question if i install the xiaomi.eu ROM is that done with the LTE Band 20? "The Xiaomi 13 Pro is less suitable as an import smartphone for Germany due to the lack of LTE Band 20..."
Source: https://www.chinahandys.net/xiaomi-13-pro-test/
if there are any restrictions or not
thanks
anrecana said:
one question if i install the xiaomi.eu ROM is that done with the LTE Band 20? "The Xiaomi 13 Pro is less suitable as an import smartphone for Germany due to the lack of LTE Band 20..."
Source: https://www.chinahandys.net/xiaomi-13-pro-test/
if there are any restrictions or not
thanks
Click to expand...
Click to collapse
With these roms you will have no more bands, no less.
anrecana said:
one question if i install the xiaomi.eu ROM is that done with the LTE Band 20? "The Xiaomi 13 Pro is less suitable as an import smartphone for Germany due to the lack of LTE Band 20..."
Source: https://www.chinahandys.net/xiaomi-13-pro-test/
if there are any restrictions or not
thanks
Click to expand...
Click to collapse
it is HW limitation, not SW..
EU miui 14.0.12 bug Miui restore , i backed up on Miui 14 china but can not restore .
Update V14.0.23.1.31.DEV(HYBRID).
https://sourceforge.net/projects/xi...mi.eu/MIUI-WEEKLY-RELEASES/V14.0.23.1.31.DEV/
Spoiler: Changelog
CHANGELOG
System
New - Support for Xiaomi 13, Xiaomi 13 Pro, Redmi K60/POCO F5 Pro and Redmi K60 Pro
Fix - Increased power consumption (Mi 11)
Fix - Silent calls in some cases (Xiaomi 12X, Redmi K40/POCO F3, Mi 10S)
Fix - NetworkBoost app crash while work profile in use
please confirm if we backup the phone with Chinese version on pc .. can we restore it back after installing this eu version, thanks
Update V14.0.23.2.6.DEV
https://sourceforge.net/projects/xi...omi.eu/MIUI-WEEKLY-RELEASES/V14.0.23.2.6.DEV/
Update V14.0.23.2.13.DEV
https://sourceforge.net/projects/xi...mi.eu/MIUI-WEEKLY-RELEASES/V14.0.23.2.13.DEV/
flashed! so far so good
pakudaboy said:
flashed! so far so good
Click to expand...
Click to collapse
Hi can you confirm:
1. google pay can use without any issue ?
2. your new eu rom model is 2210132C or 2210132G?
thanks
chuchow said:
Hi can you confirm:
1. google pay can use without any issue ?
2. your new eu rom model is 2210132C or 2210132G?
thanks
Click to expand...
Click to collapse
Hi there,
1. yep everything works fine
2. not too sure? i'm on 14.0.23.2.213dev (the latest)
I have mine rooted with magisk, twrp flashed, saftynet patched so all banks apps, intune policy passed.
Konabess used and lowered most of the GPU frequency volt lowered by 2 notch each.
uninstalled more system appes by using adb app.
some tweaks by franco kernel manager.
lposed installed with pixelfy to emulate pixel 1 device model so i can upload unlimited photos/video via google photo.
thanks alot
pakudaboy said:
Hi there,
1. yep everything works fine
2. not too sure? i'm on 14.0.23.2.213dev (the latest)
I have mine rooted with magisk, twrp flashed, saftynet patched so all banks apps, intune policy passed.
Konabess used and lowered most of the GPU frequency volt lowered by 2 notch each.
uninstalled more system appes by using adb app.
some tweaks by franco kernel manager.
lposed installed with pixelfy to emulate pixel 1 device model so i can upload unlimited photos/video via google photo.
Click to expand...
Click to collapse
thank you so much for sharing so much useful information
for question #2. you can check via these steps: setting > My device > Detailed info and specs > Model
my china rom is 2210132C
chuchow said:
thank you so much for sharing so much useful information
for question #2. you can check via these steps: setting > My device > Detailed info and specs > Model
my china rom is 2210132C
Click to expand...
Click to collapse
yep it's 2210132c
2210132c or 2210132G change nothing for this rom.
Update V14.0.23.2.21.DEV/
Xiaomi.eu Multilang MIUI ROMs - Browse /xiaomi.eu/MIUI-WEEKLY-RELEASES/V14.0.23.2.21.DEV at SourceForge.net
OFFICIAL mirror of MIUI Multilang ROM by https://xiaomi.eu/
sourceforge.net