Related
I own a Lenovo Ideaphone A390 and have noticed that root, unlock,cwm has not been released for this phone yet. It is an amazing phone and would like it very much if someone could plzz help me root my phone.
I would appreciate all and any help.
Thnx in advanced
DarthRecca said:
I own a Lenovo Ideaphone A390 and have noticed that root, unlock,cwm has not been released for this phone yet. It is an amazing phone and would like it very much if someone could plzz help me root my phone.
I would appreciate all and any help.
Thnx in advanced
Click to expand...
Click to collapse
Hi.. Did you try unlockroot.com???? Or SRSRoot??? Try it
mohamadraisbinrahim said:
Hi.. Did you try unlockroot.com???? Or SRSRoot??? Try it
Click to expand...
Click to collapse
Incompatible with Unlock root
Same with SRSRoot
Please suggest something else
Lenovo A390 Rooted
DarthRecca said:
I own a Lenovo Ideaphone A390 and have noticed that root, unlock,cwm has not been released for this phone yet. It is an amazing phone and would like it very much if someone could plzz help me root my phone.
I would appreciate all and any help.
Thnx in advanced
Click to expand...
Click to collapse
I found instructions to root the A390 here.
Step 1: Download and unzip the three attached files.
Step 2: To install the drivers for the computer, had to reboot the computer (Win8 64x) and disable driver signing. Then turn off the phone, connect to the computer, and run the InstallDriver.exe. After the driver installation is complete, disconnect the phone. The phone only makes the pre-loader interface available for a couple seconds when the USB cable is first plugged into the computer.
Step 3: Open the folder with the flash tool, and run Flash_tool.exe. Click the scatter-loading button and select "MT6577_Android_scatter_emmc.txt" from the recovery folder you downloaded. The recovery check box should automatically be populated with the TWRP.img file.
Step 4: Click download button and select "yes" to ignore the dialogue box. The flash software will now wait till it sees the MT6577 interface from the phone. With the phone off. Plug the USB cable into the phone and then into the computer. The flashing software will automatically load the recovery image to the phone. The flash-tool will show the power status bar red to yellow then wait for the message "OK" green is successful, then disconnect the phone, the TWRP recovery has been flashed. If the flash does not detect the phone when you plug it in, check your driver installation from step 2.
Step 5: Access recovery mode by pressing volume up + home + power key until the phone vibrates or it boots into recovery mode, then let go. This time open Team Win Recovery. You now have TW recovery and you can now root your device. (Make android backup first before rooting you phone)
Rooting Lenovo Ideaphone A390
After boot in recovery it will ask you to install superSU just drag/swipe to install. After you reboot the phone, you will have to have internet access to download the GUI. You can download the GUI from the play store, or download a zip which you can flash from recovery.
You are now rooted!
Good Luck
I also found a video walk through here.
thnx
srs root is working
DarthRecca said:
Incompatible with Unlock root
Same with SRSRoot
Please suggest something else
Click to expand...
Click to collapse
srsroot is working with a390 , i've rooted many a390 with connected pc/notebook to internet when you start the programs,
Voice Calls
hello! Recently, I bought a Lenovo A390 and i think that it has a problem with the voice calls. During the voice call, the person who i´m talking doesn´t hear me no more and end the call. I think the phone have a problem with the sensor because the screen flash when i put it on the ear. Anyone knows what i´m talking about? Thanks!
Just can not send the recovery file to my Lenovo A390 using SP Flashtool
Hello,
I have installed the correct drivers because I did manage to flash my ZTE v889s phone and send a recovery.file to it.
But with my Lenovo A390 I have tried over a week and nothing will work. After SP Flashtool finds the phone, it gives an error message after 4 seconds, saying:
BROM_ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
I am sure this must be some kind of locking mechanics on the phone, and not a problem with the drivers, since they are working with other Android devices. Do you know what could be the problem?
The phone is suposed to be rooted, I am using SuperSU, that I installed using the USB cable on the device.
All your good advice is highly appreciated!
Thanks!
warcious said:
Hello,
I have installed the correct drivers because I did manage to flash my ZTE v889s phone and send a recovery.file to it.
But with my Lenovo A390 I have tried over a week and nothing will work. After SP Flashtool finds the phone, it gives an error message after 4 seconds, saying:
BROM_ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050)
I am sure this must be some kind of locking mechanics on the phone, and not a problem with the drivers, since they are working with other Android devices. Do you know what could be the problem?
The phone is suposed to be rooted, I am using SuperSU, that I installed using the USB cable on the device.
All your good advice is highly appreciated!
Thanks!
Click to expand...
Click to collapse
Hi everyone, i just bought an a390 and i'm using the same tools as described here. I cant' install the recovery because i'm having the same problem that warcious is having. Any ideas what's happening this and how to fix it? Thanks.
Lenovo A390T Rooting?
scoutdriver73 said:
I found instructions to root the A390
Step 1: Download and unzip the three attached files.
Step 2: To install the drivers for the computer, had to reboot the computer (Win8 64x) and disable driver signing. Then turn off the phone, connect to the computer, and run the InstallDriver.exe. After the driver installation is complete, disconnect the phone. The phone only makes the pre-loader interface available for a couple seconds when the USB cable is first plugged into the computer.
Step 3: Open the folder with the flash tool, and run Flash_tool.exe. Click the scatter-loading button and select "MT6577_Android_scatter_emmc.txt" from the recovery folder you downloaded. The recovery check box should automatically be populated with the TWRP.img file.
Step 4: Click download button and select "yes" to ignore the dialogue box. The flash software will now wait till it sees the MT6577 interface from the phone. With the phone off. Plug the USB cable into the phone and then into the computer. The flashing software will automatically load the recovery image to the phone. The flash-tool will show the power status bar red to yellow then wait for the message "OK" green is successful, then disconnect the phone, the TWRP recovery has been flashed. If the flash does not detect the phone when you plug it in, check your driver installation from step 2.
Step 5: Access recovery mode by pressing volume up + home + power key until the phone vibrates or it boots into recovery mode, then let go. This time open Team Win Recovery. You now have TW recovery and you can now root your device. (Make android backup first before rooting you phone)
Rooting Lenovo Ideaphone A390
After boot in recovery it will ask you to install superSU just drag/swipe to install. After you reboot the phone, you will have to have internet access to download the GUI. You can download the GUI from the play store, or download a zip which you can flash from recovery.
You are now rooted!
Good Luck
I also found a video walk through
Will this procedure work on the Lenovo A390T ?
Thank you
Click to expand...
Click to collapse
Root using Framaroot...after that install twrp...just search recovery.img using googles..
Sent from my Lenovo A390_ROW
Will this procedure work on the Lenovo A390T ?
Will this procedure work on the Lenovo A390T ?
Thank you
My Lenovo A390 has problems with its ANDROID CORE AND ALL THE ANDROID COMPONENTS!!!!
Hi all. I got a rooted Lenovo A390 and I downloaded ROM Toolbox LITE. I used build.prop editor. I accidentally edited the vm growth heapsize from 16 to 10. then after rebooting the phone, everything didn't work anymore. The android phone, android core, google services, gapps, and everything else stopped working and the notification bar dissapeared and nothing in the phone will open. Does somebody know how to reverse it without using the apps in the phone since nothing would open?
ultimate bootloop
i think i got a dead end, just trying (desperately) to fix my phone,
the situation is :
usb debugging is off
stucks at boot
the recover is not functional (just an android logo and red exclamation point
can't install the drivers
how can i fix this? or is it really dead?
thank to those who will help
TheMaskaras said:
scoutdriver73 said:
I found instructions to root the A390
Step 1: Download and unzip the three attached files.
Step 2: To install the drivers for the computer, had to reboot the computer (Win8 64x) and disable driver signing. Then turn off the phone, connect to the computer, and run the InstallDriver.exe. After the driver installation is complete, disconnect the phone. The phone only makes the pre-loader interface available for a couple seconds when the USB cable is first plugged into the computer.
Step 3: Open the folder with the flash tool, and run Flash_tool.exe. Click the scatter-loading button and select "MT6577_Android_scatter_emmc.txt" from the recovery folder you downloaded. The recovery check box should automatically be populated with the TWRP.img file.
Step 4: Click download button and select "yes" to ignore the dialogue box. The flash software will now wait till it sees the MT6577 interface from the phone. With the phone off. Plug the USB cable into the phone and then into the computer. The flashing software will automatically load the recovery image to the phone. The flash-tool will show the power status bar red to yellow then wait for the message "OK" green is successful, then disconnect the phone, the TWRP recovery has been flashed. If the flash does not detect the phone when you plug it in, check your driver installation from step 2.
Step 5: Access recovery mode by pressing volume up + home + power key until the phone vibrates or it boots into recovery mode, then let go. This time open Team Win Recovery. You now have TW recovery and you can now root your device. (Make android backup first before rooting you phone)
Rooting Lenovo Ideaphone A390
After boot in recovery it will ask you to install superSU just drag/swipe to install. After you reboot the phone, you will have to have internet access to download the GUI. You can download the GUI from the play store, or download a zip which you can flash from recovery.
You are now rooted!
Good Luck
I also found a video walk through
Will this procedure work on the Lenovo A390T ?
Thank you
Click to expand...
Click to collapse
Click to expand...
Click to collapse
i just wanted to clear everything off and back to stock. hopefully the stock recovery can do that?
Hi guys, so my problem is I was installing a new rom on my rooted D855. everything was going along fine but then the process stalled. I left it running for 15 - 20 minutes but it was still on 33%. I tried holding the power button in desperation which shut the thing down. Now when I try to factory reset it goes to the prompt screen, I answer yes, then it asks me to confirm. from there however it goes to LG splash screen and eventually a black screen with Fastboot mode started. -reset- portcharge -reset- portcharge fastboot: processing commands in the top left corner. That's it.. If I try download mode it goes to the download screen and then to the black screen as described above.
Sounds pretty ordinary but if there is an answer out there I am sure one of you guys will know it.
TIA
i had some similar other issue and the only way i got out of it, is by using the lg flashtool 2014 and the KDZ file appropriate to your version
there is a thread with a step by step instructions.
you launch the flashtool, then insert the kdz file (original stock rom) then you put your phone into download mode (making sure in windows/controlpanel/devicemanager/ports - comp port 41 for the device driver)
you press volume up and plug it into the pc, the pc sees the phone and it starts reflashing the custom rom to your cell.
i presume that as soon as your download mode is working by flashing whatever command is corrupt and makes your phone black should be bypassed by then
i hope it helps - look for the thread how to flash the lg
Thanks I'll give it a shot. Not sure device manager is seeing it properly. I'll have a play and see. Thanks again for the reply
O.K here's the thing, my phone is seen in device manager as a Samsung Android Phone. Under the details tab it shows it connected via USB Modem Phone ADB Port. There is no option to change the port to 41. Anybody who can help I would be very grateful......
Hello all,
I was on ICS 4.04 custom ROM with unlocked bootloader, and my ON/OFF button was failing since several days. In one of that times that I switched off the phone, I could not switch it ON anymore. I had not installed any thing (app, ROM, etc) before the problem. I bought a new ON/OFF module (3 € :cyclops: ) and the problem still goes on.
SIMPTOMS:
If I try to turn it ON, it really works (brivates and the retro ilumination works fine) but I only get a black screen (no logo and sound). If I connect the phone to PC it is recognized. I can go into flash/fastboot mode (green/blue led), I can charge it (red/green led).
If I tyry to switch it off normally trough the on/off button, it does not response (I can not turn it off in this way, only taking off the battery). The white lights in the 2 lower buttons reamins always on if I press the home button, so I can now that the pnone had not turned off.
If I try to go into recovery I can not do it (not purple light), the screen remains black with the retro ilumination working fine
WHAT I HAVE DONE
- to buy a new ON/OFF module that work fine (I think...)
- As I can go into flash/fastboot mode, I have installed several new stock roms with flashtool (GB, ICS) and several kernels without result
- I have checked all the internal conections in the PCB and screen, all seem to be right
- I have tried to go into the phone trough adb, but as I have installed stock roms, I have not enabled the debug mode in the phone, so I can not connect with it. I have searched the web, but I have not been able to find a method to enable the debug mode in the phone
- I have locked/unlocked the bootloader several times
- take off the batery a whole night and to try it again
I am thinking in a problem with the screen, but it was working fine just before to turn it off before the problem. The problem is that I do not want to spend the money for a new screen without to know if the problem is in the PCB :silly:
The more strange thing is that I can not to turn it off normally through the on/off boton , it seems that the phone has gone into a loop internally when you turn it on.
Some ideas?... Thanks in advance
You have the problem that your phone doesn't boot, the problems lies within your kernel,
first of all to fix it, use flashtool and search for a stock firmware for your arc, don't know if you got a lt15i?(Xperia Arc) or lt18i (Xperia Arc S).
This will fix your booting problem...
Make sure your bootloader is unlocked, make sure you follow the ROM-instructions step-by-step when you install one, because this is the reason you failed installing your custom kernel.
Some instructions on how to install a custom rom =>
Step 1. Gather information about YOUR phone. (write down your phone type, your kernel version, your baseband version etc....)
Step 2. On your phone go the your Settings>About Phone> Build Number and press this about 7 times, you'll notice the notification of becoming 'developer', then go back to settings>developer settings (above About Phone) and scroll to whenever you find USB-Debugging, make it active
Step 3. Install ADB and fastboot drivers for your phone
Step 4. Unlock your bootloader
Step 5. Find and download a compatible ROM ( Make sure your phone type is listed as working ... ) and install recovery on your phone.
Step 6. Open up the ROM zip-file and look for the kernel (Boot.img) inside of the ROM and extract it OR Download a kernel which is supported by the downloaded ROM
Step 7. Copy your Kernel image (boot.img) to the ADB Driver map (not necessary but alot easier to work this way) and copy your ROM-zipfile to your SD or Internal Memory.
Step 8. Open up a (Command) Terminal and use the 'cd'-command to explore to your map with adb drivers
Step 9. Connect your phone with your computer and type in the terminal-window: adb reboot fastboot
Step 10. You'll notice your LED changing to blue when it worked. Then type in fastboot flash boot boot.img
Whenever this step has worked you'll have flashed a custom kernel on your phone....
Step 11. Then you got to boot into recovery using Power + Volume Down
Step 12. In recovery do a Full Wipe, and install your ROM (+ Gapps whenever you need google play store.)
You now have a custom ROM and kernel installed!
many thanks MrMaddTraxx. That is not my problem, but your answer will be very usefull for me in the future :good:
Definetively I think that the problem is that the screen is broken. My main problem was that I have not enabled the USB debugging in my mobile and I could not make any important change on it.
Finally I got to enable USB debugging as I show in this post:
http://forum.xda-developers.com/showpost.php?p=61792353&postcount=204
Once I have USB debugging, I could enable the screen with this wanderfull app:
http://forum.xda-developers.com/showthread.php?t=2786395
I could control my phone as the touch screen works OK. I have been able too to connect it to my TV through HDMI, seeing my mobile in it too.
So the only thing to do is to buy a neww screen. I would like to ask you if you believe really that the problem is in the screen (as the backlight and touch screen work fine) or in the connections for the screen in the PCB
thanks
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Same. I tried using the official instructions to flash the stock rom but the SP flash tool stops responding after download button is pressed
a.cid said:
Same. I tried using the official instructions to flash the stock rom but the SP flash tool stops responding after download button is pressed
Click to expand...
Click to collapse
The Hardware of P8000 is pretty cool, but the Software is "§$§"%§""!$%
When you go to recovery mode and get the the android robot symbol. Press again Vol up + Power until you enter to recovery. Make a 3 wipe (data factory , cache and dalvink). Reboot and uninstall the El loader. Use another Loader instead of El Loader
i had the same problem. (in English NO COMMAND) I only flash Eragon ROM again. Sometimes you have to repeate.
AL 6677 - ELEPHONE MUST BE TURN-OFF !!!!!!! and CONNECT USB CABLE REPEATEDLY !!!
After that everything goes according to instructions
https://translate.google.at/transla...-p8000-rooten-und-flashen/&edit-text=&act=url
same problem since OTA my phone is bricked and cant unbrick
neonero said:
When you go to recovery mode and get the the android robot symbol. Press again Vol up + Power until you enter to recovery. Make a 3 wipe (data factory , cache and dalvink). Reboot and uninstall the El loader. Use another Loader instead of El Loader
Click to expand...
Click to collapse
THX a lot, I found only the 2 Options to wipe data factory and cache....... dalvink was not displayed in the menue (screenshot attached)
How to uninstall the EL Loader ?
showshow747 said:
i had the same problem. (in English NO COMMAND) I only flash Eragon ROM again. Sometimes you have to repeate.
AL 6677 - ELEPHONE MUST BE TURN-OFF !!!!!!! and CONNECT USB CABLE REPEATEDLY !!!
After that everything goes according to instructions
THX, I will try to flash Eragon, CM 12.1 is still not available, isn't it?
Click to expand...
Click to collapse
No CM 12.1 is not available yet.
In order to uninstall EI Loader, install first root (superSU), then install ccleaner and you can uninstall EI Loader (In system app)
Hi there, sorry for the revival !
But i got the same problem: OTA update, fail, P8000 blocked on boot screen.
I tried wipe data/factory reset + wipe cache -> nothing changed, still boot screen blocked...
Then, i tried to use flash tool, but, the phone isn't booting, so my pc isn't recognizing the phone..
I'm not even sure that I correctly installed the drivers..
Can i use flash tool even if the phone is blocked to boot screen?
I downloaded this ROM: stock-rom-elephone-p8000-20150907-android-5-1 (this is my first post i can't post URL..)
Because i got some issues with my phone and support told me to try it.
But when i follow the tutorial, launching "donwload" and connecting the phone, nothing happening..
The phone turn on, and display recharging logo, and flash tool still wainting.
Recovery mode -> "No command", Volume up + power is working, i used it to wipe datas
But at the moment, i'm still blocked, since 2 days, i dont know what to do
Can someone help me?
Thank you by advance, i hope my english isn't so bad
Zywoon said:
Hi there, sorry for the revival !
But i got the same problem: OTA update, fail, P8000 blocked on boot screen.
I tried wipe data/factory reset + wipe cache -> nothing changed, still boot screen blocked...
Then, i tried to use flash tool, but, the phone isn't booting, so my pc isn't recognizing the phone..
I'm not even sure that I correctly installed the drivers..
Can i use flash tool even if the phone is blocked to boot screen?
I downloaded this ROM: stock-rom-elephone-p8000-20150907-android-5-1 (this is my first post i can't post URL..)
Because i got some issues with my phone and support told me to try it.
But when i follow the tutorial, launching "donwload" and connecting the phone, nothing happening..
The phone turn on, and display recharging logo, and flash tool still wainting.
Recovery mode -> "No command", Volume up + power is working, i used it to wipe datas
But at the moment, i'm still blocked, since 2 days, i dont know what to do
Can someone help me?
Thank you by advance, i hope my english isn't so bad
Click to expand...
Click to collapse
Yes you can use SPFlash tool evenif the phone stucks in the boot screen. Simply switch the phone off, start SPFlash tool and then connect the phone to usb.
If you follow the instructions from elephone, then your phone should working again: http://bbs.elephone.hk/thread-1037-1-1.html#.VofQ13wvdpo
Cheers
Hi, and thx for the help.
The driver is correctly installed now, i had to allow unsigned drivers in windows parameters.
So, i followed the tutorial, again.
I configured SP flash tool, clicked download, and then connected powered off P8000 with USB.
But, again, the phone displays recharging logo, and flash tool still waiting...
The phone is recharging so the USB is working, so i don't know how to make my PC detect the phone......
Is there a way or a thing that i missed?
thank you..
EDIT: i finally got a timeout error from flashtool..
I missed something, but what !? i can't remove P8000 battery, is there somthing to do to get it detected by windows?
Like a boot mode, or a magic formula... i'm open
For MTK Driver installation:
Did you follow skeletons Guide? http://forum.xda-developers.com/elephone-p8000/help/guide-windows-10-mtk-vcom-usb-drivers-t3264884
I'm sorry to say, that I do not have any experience with windows installation, this problem, because SPFlash tool performes on my 64bit Linux very well, without any driver trouble.
Cheers
Hi,
I'm on windows 8.
I used SP_driver_v2.0, that is an .exe
it's the only driver tips gived in most of tutorial
I allowed unsigned drivers installation, and i correctly installed it.
I tried too use flashtool before and after restarting the PC-> no changes
Flashtool doesnt detect the phone
I start getting crazy..
I have repaired mine, so i'll share
Al6677 said:
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Click to expand...
Click to collapse
So the simple way to solve it is flashing the latest stock elephone p8000 ROM, which you can find on google easly
1. as described on other forums, you have to install the adnroid drivers, then get the sp flash tool, and have an un-zipped stock elephone p8000 ROM.
2. if you are stuck at bootloop, do the following to power off the phone so you can flash the ROM
1. Long press power button until power off
2.Do it fast--Press volume Up and then hold power button
3. choose recovery (volume up choose menu, volume down enter)
4. android logo with red triangle is displayed( "no command")
5. hold power button and press volume up
You're in recovery mode
3. select power off
4. open the SP flash tool >go to download tab>opne "scatter loading"( you will find it in the Folder where you unzipped the stock elephone p8000 ROM, if you have more folders there, chose "firmware" folder)
5. on the left side, under scatter loading, you will find a "pull-down" tab - it will be written "download" chose "firmware upgrade" or "upgrade"
6. start the process, then connect your elephone p8000 (it must be powere off) via usb cable to the PC, the process will start,and in less then 5 Minutes you have a factory new Elephone p8000 with the latest good update
7. WATCH OUT- it will erase all your data, absolutely all your data on the phone, except SIM and SD card.
Hope it helped, if not, feel free to ask me =)
Hello,
I have similar problem. Bought P8000 5 days ago. Did update today. Bricked. Stuck at logo ... I tried to flash but SP flush tool but the process isn't starting. When I downloaded ROM I received long list as on the screenshot: kaczorowscy.name/Screenshot.png
I have ubuntu - I see lsusb and dmesg see the phone (it is shut down from recovery menu) but maybe I am missing something ....
Ok here is what id did:
1. Get SP flashtool
2. get newest stock ROM
3. Shut down phone through android recovery menu (start phone with holding volume up, select recovery mode, wait for dead android, hold volume up and unblock button for 3 sec.)
4. Open SP flashtool - use "format all + download" of ROM (unzip and select scatter file from rom) - click start
5. Connect shut downed phone
6. Dot OK! from flashtool
PS. Flashing removed IMEIs - they are both written on the battery - you need to use android service menu to check them with special codes and reboot the phone.
Thanks ALL! :good:
Fix - Recovery Mode
Al6677 said:
Hi there,
I just updated P8000 via OTA update and after downloading the Update, the phone restarted and stops at the elephone boot Logo (about 30 min )!!
I did 5 Restarts but every time it hangs at the boot logo...
In the past i did no other updates or flashing ROMS.. nothing!
When i press "Volume Up" and "Power" to Start, i get three Options:
Recovery Mode
Fastboot Mode
Normal Boot
Using Recovery Mode leads to: Symbol Android Robot with "No Order" (in german : "Kein Befehl")
Using Fastboot Mode leads to: Nothing (Recovery Menue stays)
Using Normal Boot leads to: restart and hanging at Elephone Boot Logo
So, I am running out of Options... any ideas?
Cheers, Albert
Click to expand...
Click to collapse
When I was trying to root my p8000 I couldn't flash a custom recovery, fortunately I discovered that to access recovery on stock android you need to go to the screen with the android and "no command"/"no order" text and hold down Vol+Up and Power for 3~ seconds and then release power, this will boot you into recovery mode, If wiping cache/factory reset isn't enough "fastboot flash recovery <image>.img" SHOULD work now
hope this helped
<<.>>Asus Zenphone 2 z008 stuck after hard reset cannot open!>> I am out of options
Dear all kind developers ,
I went to the recovery mode of my asus zenpone 2 and wipe of the data from it.
After I clicked data wipe it did not continued , it was stuck for like 20 minutes and I restarted the phone .
After that every time I try to open it or go to recovery I cannot open the phone. It only shows an android logo and an error.
I can go to the boot loader menu .
I have already searched the whole internet and found I solution for it , which I have to
* Download intel driver, and some abd files
* Enable Usb debugging and switch of the phone
* Go to boot loader and switch volume up until it shows fastboot
* Connect the phone via usb and open the adb files in cmd
* Type fast boot remove cache in the cmd
And it says that the phone will be alright after the process !
BUT, I DID NOT KEEP THE USB DEBUGGING TOOL ON ALL THIS TIME !
Can anybody help me with a solution to this ! Please
When you have that error logo, press your volume button and then power button and release it immediately. I think thats how you get into recovery mode/bootloader menu. If this doesn't work, try its vice versa because its been a long time since I've gone ito recovery mode/bootloader menu.
rooter789 said:
Dear all kind developers ,
I went to the recovery mode of my asus zenpone 2 and wipe of the data from it.
After I clicked data wipe it did not continued , it was stuck for like 20 minutes and I restarted the phone .
After that every time I try to open it or go to recovery I cannot open the phone. It only shows an android logo and an error.
I can go to the boot loader menu .
I have already searched the whole internet and found I solution for it , which I have to
* Download intel driver, and some abd files
* Enable Usb debugging and switch of the phone
* Go to boot loader and switch volume up until it shows fastboot
* Connect the phone via usb and open the adb files in cmd
* Type fast boot remove cache in the cmd
And it says that the phone will be alright after the process !
BUT, I DID NOT KEEP THE USB DEBUGGING TOOL ON ALL THIS TIME !
Can anybody help me with a solution to this ! Please
Click to expand...
Click to collapse
When you get to the Android with "ERROR" underneath, hold power and press volume up. It should go to recovery. Try clearing cache again from recovery.
If that doesn't work, go and get the latest version of the rom from the ASUS site, put it on a FaAT32 formatted sd card (rename to MOFD_SUPDATE) and put in phone. Go to recovery and flash rom from sd card.
Otherwise use fastboot and download an image, pre-rooted images available in Original Android Developement, thankyou Shakalaka, and flash from fastboot with command "fastboot flash system system.img" (make sure you put the system.img file in the same directory so you don't have to go hunting).
Solution found !
I've found a solution for this problem
All you need to find is a same device which is normal or BUY a new one ! OR BEG,Borrow, or steal from a friend
Find a asus zenfone 2 from a friend and enable usb debugging
Download intel driver
Just google it
Download Abd driver installer from the link bellow
Just google it
Just enable the usb debugging mode from the phone which you found
Open the adb driver intaller and fetch the abd driver directly from the installer for your asus phone
After that, download the following adb interface
Google it like " Abd interface for asus fastboot"
Then, extract the file , hold shift and right click the folder you will see a option in cmd option
Click that and a cmd window will be opened
Turn off your phone
Hold volume up and power button
After the phone vibrates realease from power button and keep holding volume up button
Boot loader will open and press volume up until you see "continue in fastboot mode"
Keep it the mode and connect your device to pc
It will directly intstall usb driver and adb driver after that
Just go back to your pc and type "fastboot format cache" and the process will continue
You will know when the process is over from the cmd in your pc
After that reboot your phone and you will still see the error
Click power and volume up button and the recovery mode will apear
Just wipe your data and every thing is going to be ALRIGHT