Related
i have install ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 on Galaxy Ace 2.
After install rom, mobile network not working.
Please help me
sorry for my bad English
dhenys said:
i have install ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 on Galaxy Ace 2.
After install rom, mobile network not working.
Please help me
sorry for my bad English
Click to expand...
Click to collapse
Which ace 2 varient you have? If P or L remember to replace the tee folder
Sent from my GT-I8160 using Tapatalk
Yes, this always happens when you use a custom ROM which is not on your variant, replace the tee folder on system/lib.
You can download it from YouTube, I watched a video with a mediafire link with this folder.
Mord Fustang said:
Yes, this always happens when you use a custom ROM which is not on your variant, replace the tee folder on system/lib.
You can download it from YouTube, I watched a video with a mediafire link with this folder.
Click to expand...
Click to collapse
Thanks. I'll try
if your come from GB flash last JB stock first, (www.sammobile.com/firwares), Root and install CWM, full wipe, (i always do system format too), and install your desire Rom.
Edray said:
if your come from GB flash last JB stock first, (www.sammobile.com/firwares), Root and install CWM, full wipe, (i always do system format too), and install your desire Rom.
Click to expand...
Click to collapse
This has to do with 'tee' folder. And jb version doesnt matter
Sent from my GT-I8160 using Tapatalk
On my I8160, same problem.
After I flash CyanogenMod 11.0 (By New Maclaw) into my I8160, only mobile networking doesn't work!
My I8160 is running the original Andrpoid 2.3.6 (baseband version: I8160DXLF2, kernel version: 2.6.35.7-I8160XXLD8-CL11100997)
dhenys said:
i have install ROM][4.3.1][TeamCanjica] CyanogenMod 10.2 on Galaxy Ace 2.
After install rom, mobile network not working.
Please help me
sorry for my bad English
Click to expand...
Click to collapse
qianw said:
On my I8160, same problem.
After I flash CyanogenMod 11.0 (By New Maclaw) into my I8160, only mobile networking doesn't work!
My I8160 is running the original Andrpoid 2.3.6 (baseband version: I8160DXLF2, kernel version: 2.6.35.7-I8160XXLD8-CL11100997)
Click to expand...
Click to collapse
......
flash jb first then cm11
which jb firmware can be used? please recommend a firmware for me.
thanks.
teddytsen said:
......
flash jb first then cm11
Click to expand...
Click to collapse
qianw said:
which jb firmware can be used? please recommend a firmware for me.
thanks.
Click to expand...
Click to collapse
any(for your varient)
From http://live.samsung-updates.com/index.php?device=GT-I8160 , I can't find android 4.1.2 firmware for my I8160.
Could you confirm that any android 4.1.2 firmware can be used?
thanks.
PDA: I8160DXLF2
PHONE: I8160DXLF2
CSC: I8160LBLF2
teddytsen said:
any(for your varient)
Click to expand...
Click to collapse
qianw said:
From http://live.samsung-updates.com/index.php?device=GT-I8160 , I can't find android 4.1.2 firmware for my I8160.
Could you confirm that any android 4.1.2 firmware can be used?
thanks.
PDA: I8160DXLF2
PHONE: I8160DXLF2
CSC: I8160LBLF2
Click to expand...
Click to collapse
what are you finding??? firmware code??
I could not find a zip file whose PDA is same as my I8160's PDA code.
So I don't know which one can be used for My I8160.
teddytsen said:
what are you finding??? firmware code??
Click to expand...
Click to collapse
qianw said:
I could not find a zip file whose PDA is same as my I8160's PDA code.
So I don't know which one can be used for My I8160.
Click to expand...
Click to collapse
i just said, the firmware codes are different so theres no point matching em. ind any fw
Sorry for my misunderstanding.
After I flash any android 4.1.2 firmware into my I8160 using ODIN, if it bricks my I8160, then how to do?
teddytsen said:
i just said, the firmware codes are different so theres no point matching em. ind any fw
Click to expand...
Click to collapse
qianw said:
Sorry for my misunderstanding.
After I flash any android 4.1.2 firmware into my I8160 using ODIN, if it bricks my I8160, then how to do?
Click to expand...
Click to collapse
it wont(unless you use wrong varient fw)
sir, the problem is i could not find a correct variant fw for my I8160. :crying:
teddytsen said:
it wont(unless you use wrong varient fw)
Click to expand...
Click to collapse
qianw said:
sir, the problem is i could not find a correct variant fw for my I8160. :crying:
Click to expand...
Click to collapse
...
If yours in I8160 find one that belongs there. Dont find the P or L varient fws
Theres a fw thread in general forum
Sent from my GT-I8160 using Tapatalk
Hi,
I have a very similar problem as described above: I don't get any network connection on my I8160P.
I flashed from Gingerbread to CM 10.2 (cm-10.2-20140228-UNOFFICIAL-codinap) and now I can't get any any mobile network connection. Phone says no service.
I read the suggestions in this thread but not really sure if I get them right as I'm totally new to this.
Some people here talk about deleting/editing the tee folder. Could this solve my problem? How to do that?
Others say that I need to to update a Samsung version first before flashing to CM 10.2. Again same questions: Could this solve my problem? How to do that?
Let me me know if you need further details.
Hope you can help me!
SGA2 problem
Hey guys
can someone helpme to fix problem in my GA2,
cannot access to the internet (cannot display HDSPA&EDGE signal)
im frusrtated for this problem, help me :crying:
Hey folks, just wanted to know is there a way to downgrade from 4.4.2 to 4.2.2?
I don't care about triggering the knox counter whatsoever.
Is it possible by rooting maybe?
Thanks.
Oxbob said:
Hey folks, just wanted to know is there a way to downgrade from 4.4.2 to 4.2.2?
I don't care about triggering the knox counter whatsoever.
Is it possible by rooting maybe?
Thanks.
Click to expand...
Click to collapse
Try this way http://forum.xda-developers.com/showpost.php?p=53752825&postcount=620
N0Ntoxic said:
Try this way http://forum.xda-developers.com/showpost.php?p=53752825&postcount=620
Click to expand...
Click to collapse
It totally worked, thanks man.:good:
N0Ntoxic said:
Try this way http://forum.xda-developers.com/showpost.php?p=53752825&postcount=620
Click to expand...
Click to collapse
good tip thanks
hi.
I managed to downgrade 4.4.2TCL with knox 2.0 to 4.2.2.
was simple SamMobile I went to download the "ZTO-4.2.2-I9195UBUBNE2 Brazil" so Caribe; worked with this. Then just put in odin mode and 4.2.2 again.
Sorry my english
Cool, it worked for me aswell for m'y broken N4
hi there!
is it posible to perform this downgrade from 4.4.2 to 4.2.2 in a i9190 device? Because I think the link to the solution is for the i9195 model only.
No its not. You will brick your device.
ok. So I'll have to wait until samsung releases 4.4.2 for my device and that would be in .......3....2....1........3/4..............1/2......................
nixiepro said:
hi there!
is it posible to perform this downgrade from 4.4.2 to 4.2.2 in a i9190 device? Because I think the link to the solution is for the i9195 model only.
Click to expand...
Click to collapse
N0Ntoxic said:
No its not. You will brick your device.
Click to expand...
Click to collapse
And in a i9192?
Oxbob said:
It totally worked, thanks man.:good:
Click to expand...
Click to collapse
I olso have a Samsung s4 mini i9195 with 4.4.2 and i want tio downgrade it can u tell me/write me step by step what to do?I just neade ODIN the firmware,coonect the handy start Odin and launch the application?Iì'm realy afraid to brick it or make something wrong.After if I want to go back to 4.4.2 I must upgraade only with ODIN and only with brasilian firmware?Or by handy i can upgrade or no?
Thank's
Helen
For the german folks out there...
I managed to downgrade from stock KK 4.4.2 Firmware to JB 4.2.2 by using this Rom:
s4miniarchive.com/2014/04/deodexed-and-rooted-stock-for-galaxy-s4-mini.html
Installation via CWM...
Can someone explain to me why it did work?
I succesfuly downgraded my i9190. But I can not turn on wifi. I dont want use custom kernel. Is there another solution?
Thanks for this helpful post.
Help
umuturunc said:
I succesfuly downgraded my i9190. But I can not turn on wifi. I dont want use custom kernel. Is there another solution?
Thanks for this helpful post.
Click to expand...
Click to collapse
What method used to Downgrade I9190 ?
If the radio does not work you can download a ROM SamMobile that is their region.
Ragdeana said:
What method used to Downgrade I9190 ?
If the radio does not work you can download a ROM SamMobile that is their region.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2549357
it is ok to flash official frameware with a different PDA & CSC ?
KhaledF said:
it is ok to flash official frameware with a different PDA & CSC ?
Click to expand...
Click to collapse
Yes you can flash any region firmware to your note as long as it is for your variant
Kind XDA users,
As the topic implies, I'd like to downgrade this unrooted phone.
Could anyone direct me to a to a link with the proper firmware / procedure?
Will I be able to downgrade without tripping Knox?
Phone info:
Samsung Galaxy S4 Mini GT-I9195 (8GB)
Android version: 4.4.2
Baseband version: I9195XXUNCJ6
Buildnumber: KOT49H.I9195XXUCNJ6
Kernel version: 3.4.0-3093013
Perhaps I should also note why I'd like to downgrade:
For some reason the phone gives bad signal on GSM network.
It seems it is connected normally, though sometimes people reach te voicemail without any reason.
Also outgoing calls seem to fail at that time, reboot solves this temporary.
The option "GSM only" is not available under network settings.
I put the SIM-Card in another S4 Mini on v4.2.2 the option "GSM only" is available.
(I did not select it though as the plan has data, it was just the only difference I could find other than android version.)
Tested for approx 2 week and it runs fine, problems are yet to be discovered.
Edit: feel free to move this topic, did not notice I was in the general section.
Kind regards, Stefan.
Hi Stefan!
The only one option is flash ZTO-UBUBNE2 firmware(Brazil), It don't have much bloat, 90% have option to uninstall...
Good luck, MixoMaxoViper.
Thanks for the reply, could you link me to the file?
Can it be flashed with kies or only with odin?
Also will this trip Knox?
Kind regards, Stefan.
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
And for i9190?
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Krik88 said:
And for i9190?
Click to expand...
Click to collapse
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
No, KNOX will be still 0x0
Good luck!
MixoMaxoViper said:
@up
http://samsung-updates.com/
Then search for I9195--->ZTU UBUBNE2
Click to expand...
Click to collapse
Hi all,
Thanks a lot for pointing me in the right direction.
Firmware has been flashed without any problems.
Kind regards, Stefan.
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
Click to expand...
Click to collapse
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
Not unless you can put the bootloader from Brazilian rom to your Italian ROM but I think that would be break the knox and probably wouldn't even work anyway.
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
00ehsan00 said:
how we can know that ,which jellybean rom have the same bootloader as kitkat?(so we can downgrade)
i want it for i9190 and i9192
Click to expand...
Click to collapse
Don't think such a rom exists for those models just i9195. That's with the new boot loader. I may be wrong though...
Thaevil0ne said:
Will this trip Knox and how is it flashed then?
Kind regards, Stefan.
Click to expand...
Click to collapse
no this has the same bootloader from kitkat you will be able to flash this without problems!
---------- Post added at 02:58 PM ---------- Previous post was at 02:55 PM ----------
danio.78 said:
Hi, my phone brand vodafone italy and I have upgrade to 4.4.2.
After flashing brasil firmware 4.2.2 it's possible flashing firmware 4.2.2 vodafone italy?
thank you
Click to expand...
Click to collapse
no ONLY the ZTO 4.2.2 hast the v2 bootloader. other 4.2.2 will fail install and maybe trigger knox
bad news for us sniff sniff
---------- Post added at 03:46 PM ---------- Previous post was at 02:58 PM ----------
u can use this:
https://forum.xda-developers.com/showthread.php?t=2706880
this is touchwiz rom with cm like customization read it. only s4 mini lte (GT-I9195,serranoltexx)
sasank360 said:
That rom is official samsung rom. So it will not trip knox. Extract the downloaded zip file and u get a "tar.md5" file along with a 'dll' file.
Open odin and click on PDA or AP button and choose the extracted tar.md5 file. Then flash it.
This ZTO-UBUBNE2 rom is meant for GT-I9195. You must find a jellybean firmware with same bootloader as kitkat firmwares.
Then you can downgrade. I have i9195, so i do not know about any jellybean firmwares for I9190 that have knox 2.0 bootloader.
Click to expand...
Click to collapse
sir file not found what im going to use ? my phone is from finland can i use diffrent rom except for NEE(finland) region
I can't downgrade mine (GT-i9190), knox doesn't allow it
For the life of me, I can not find the stock ROM for my device.
Lollipop or Marshmallow
SM-P6000ZKAXSA
Australia
SM-P600
meekspace said:
For the life of me, I can not find the stock ROM for my device.
Lollipop or Marshmallow
SM-P6000ZKAXSA
Australia
SM-P600
Click to expand...
Click to collapse
Tried samfirm tool already?
bmwdroid said:
Tried samfirm tool already?
Click to expand...
Click to collapse
I haven't. I will check it out.
Thanks