Related
I have installed and reinstalled the samsung windows drivers about four times.
My phone has not yet been activated and I'm not sure I'm going to attach it to service for the foreseeable future instead of possibly using it as an ipod touch with a keyboard.
I have connected the phone to my laptop one time. I feel asleep with the phone searching for drivers (the drivers had already been installed but the status bar message said it was searching anyway) and when I woke up it seemed fully connected. I was able to cwm3 root the phone but bricked it I think by putting an ext4 filesystem on without moving immediately to an ext4 rom.
I've restored it to stock and through wifi updated it over the air to ec05
Ever since then I have never been able to connect using any of the usb ports, trying two different usb cables, the oem and a generic micro-usb cable and using either windows vista or ubuntu on this computer.
Clockworkmod reports that the phone is not connected and I am not able to see the phone as a hard drive when I set it to mass transfer mode.
In download mode, odin is able to communicate with the phone reliably.
I've repeatedly tried all ##8778# settings and I've set debugging mode off and on. Device manager shows that the phone is connected to port COM7.
Is it possible that the activation program is preventing the USB connection? I would think not because the activation status has not changed since the one time it did connect, but I'm at a total loss for any explanation.
My next step is to try another computer but I don't have one handy.
Is it possible to root a phone only through odin, or to put a file onto the sd card that can root without the use of the computer?
garyf said:
I have installed and reinstalled the samsung windows drivers about four times.
My phone has not yet been activated and I'm not sure I'm going to attach it to service for the foreseeable future instead of possibly using it as an ipod touch with a keyboard.
I have connected the phone to my laptop one time. I feel asleep with the phone searching for drivers (the drivers had already been installed but the status bar message said it was searching anyway) and when I woke up it seemed fully connected. I was able to cwm3 root the phone but bricked it I think by putting an ext4 filesystem on without moving immediately to an ext4 rom.
I've restored it to stock and through wifi updated it over the air to ec05
Ever since then I have never been able to connect using any of the usb ports, trying two different usb cables, the oem and a generic micro-usb cable and using either windows vista or ubuntu on this computer.
Clockworkmod reports that the phone is not connected and I am not able to see the phone as a hard drive when I set it to mass transfer mode.
In download mode, odin is able to communicate with the phone reliably.
I've repeatedly tried all ##8778# settings and I've set debugging mode off and on. Device manager shows that the phone is connected to port COM7.
Is it possible that the activation program is preventing the USB connection? I would think not because the activation status has not changed since the one time it did connect, but I'm at a total loss for any explanation.
My next step is to try another computer but I don't have one handy.
Is it possible to root a phone only through odin, or to put a file onto the sd card that can root without the use of the computer?
Click to expand...
Click to collapse
This thread had a pre-rooted EC05 that you can flash through Odin
http://forum.xda-developers.com/showthread.php?t=1021305
budderocks said:
This thread had a pre-rooted EC05 that you can flash through Odin
http://forum.xda-developers.com/showthread.php?t=1021305
Click to expand...
Click to collapse
Thanks. I'm on ec05 now, so I'm OK with that. I'd like to root either with or without resolving the usb connection issue.
Is that possible at all?
garyf said:
Is it possible to root a phone only through odin, or to put a file onto the sd card that can root without the use of the computer?
Click to expand...
Click to collapse
budderocks said:
This thread had a pre-rooted EC05 that you can flash through Odin
http://forum.xda-developers.com/showthread.php?t=1021305
Click to expand...
Click to collapse
garyf said:
Thanks. I'm on ec05 now, so I'm OK with that. I'd like to root either with or without resolving the usb connection issue.
Is that possible at all?
Click to expand...
Click to collapse
While it isn't JUST a root that you are doing, as stated by budderocks, you can flash the pre-rooted EC05 tar file through Odin, although it will require you to reinstall any apps you currently have. This will start you out with either a stock(ish) setup, with root already included (not sure about Clockwork though), or you can use the one modified for the ext4 filesystem with CWM 3.0.0.6 included which will convert it to ext4 the first time you boot into recovery.
garyf said:
I have installed and reinstalled the samsung windows drivers about four times.
My phone has not yet been activated and I'm not sure I'm going to attach it to service for the foreseeable future instead of possibly using it as an ipod touch with a keyboard.
I have connected the phone to my laptop one time. I feel asleep with the phone searching for drivers (the drivers had already been installed but the status bar message said it was searching anyway) and when I woke up it seemed fully connected. I was able to cwm3 root the phone but bricked it I think by putting an ext4 filesystem on without moving immediately to an ext4 rom.
I've restored it to stock and through wifi updated it over the air to ec05
Ever since then I have never been able to connect using any of the usb ports, trying two different usb cables, the oem and a generic micro-usb cable and using either windows vista or ubuntu on this computer.
Clockworkmod reports that the phone is not connected and I am not able to see the phone as a hard drive when I set it to mass transfer mode.
In download mode, odin is able to communicate with the phone reliably.
I've repeatedly tried all ##8778# settings and I've set debugging mode off and on. Device manager shows that the phone is connected to port COM7.
Is it possible that the activation program is preventing the USB connection? I would think not because the activation status has not changed since the one time it did connect, but I'm at a total loss for any explanation.
My next step is to try another computer but I don't have one handy.
Is it possible to root a phone only through odin, or to put a file onto the sd card that can root without the use of the computer?
Click to expand...
Click to collapse
I have been through this myself and came short of beating my head against a wall before reading that it "may" be a cable issue.
Well, after tyring everything else, (because it couldn't be something as simple as changing to a different cable, right??!!) I pulled out an old cable from my Blackberry days and BAM - my laptop searched for and loaded the needed drivers and sees my phone everytime I plug it in now. I have also used a cable from a friends phone (not a Blackberry) and my laptop still sees the phone so I'm not advocating for Blackberry cables specifically.
Bottom line is - the Samsung cable is a piece of crap. It may work for a day or a month, but it will soon (for 98% of Epic owners) become nothing more than a charging cable before long.
Try using a different cable (not a Samsung model ) and see if that works. If so, then ODIN/one-clicks become your best friend(s)!!
Hope this helps!
-J
A few weeks after rooting and installing CM10 on my GS3, it stopped recognizing any form of USB data connection. It still charges from both computer and wall adapter, but I cannot initiate a data transfer or recognize my device using ADB.
I have tried:
three different OEM Samsung cables (from SG3/SG4 phones)
all the ports on two different Win 7 laptops
all the ports on an Ubuntu desktop
enabling or disabling USB debugging
with different combinations each time. No "USB connection" dialog has shown up on the phone, and no "new device" dialog has shown up on any of the computers. I know that I can get ADB working with a different Android phone (HTC Inspire 4G) so I know that my main laptop has USB ports that work and the cables I've tried work as well, so I'm left to assume that the issue is with the GS3. External visual inspection does not suggest the USB port on the phone is damaged, and the phone is only a year old, so I don't believe that is the cause.
Is there a system setting that I may have modified on the GS3 that would disable all forms of USB communication?
(The end goal is to get at least ADB working so I can try and recover some deleted files from the internal memory; I haven't found a reliable method that does not require ADB so I'm trying to get that to work. I know that transferring files on or off can be accomplished with the external SD card or over Wifi but that is not what I'm looking for)
Any suggestions from anyone?
I am not sure. Could be a software issue. I would try backing up your current cm ROM and try installing a fresh touchwiz ROM to see of that works, to rule out software issues. This could also be a android 4.3 issue. Could try stickmount or a similar otg app from the market.
Sent from my Nexus 7
stelv said:
I am not sure. Could be a software issue. I would try backing up your current cm ROM and try installing a fresh touchwiz ROM to see of that works, to rule out software issues. This could also be a android 4.3 issue. Could try stickmount or a similar otg app from the market.
Sent from my Nexus 7
Click to expand...
Click to collapse
I don't think any OTG app like stickmount will help; I'm not trying to connect devices to my phone. I'm trying to get my computer to recognize my phone (and vice versa) in order to get ADB working.
If I can avoid flashing a RAM I'd like to, because I'm still interested in recovering those deleted files. If that is the only thing that would help, though, then I'll do it. Any other suggestions?
Install Kies and that should get the drivers for the pc in place. Odin should recognize the device when it is in the download mode. If that works, then the pc to phone connection is OK and I'd look to software instead of hardware.
Or, if you boot into your custom recovery, either CWM or TWRP, you should be able to get ADB to recognize the device and issue commands including pulling the files on Internal storage. TWRP also has a file browser built in that might be useful.
I have tried uninstalling any Samsung drivers then using the SGS3 toolkit to install the official drivers, but that didn't change anything on the PC end.
Additionally, I tried finding my device while it was in recovery using ADB and there was no connection indication either.
I currently have CWM installed, but I didn't see a mounting option like I've seen for TWRP. Can I flash TWRP without a computer?
Or try this out: Download mode>Connect via USB>Let Windows download and update all drivers until the notification in the bottom right says it's ready to use>Unplug>Battery Pull>Boot normally>connect again. Voila! It works every time when it's being wonky and its a simple way that doesn't require a bunch of downloads!
installing insecure adb might help
Rebooting into download mode does nothing.
I believe rooting and installing CM10 means I already have insecure adb?
thanks
thanks
what next?
aEx155 said:
Rebooting into download mode does nothing.
I believe rooting and installing CM10 means I already have insecure adb?
Click to expand...
Click to collapse
I have this same issue, in download mode, the device is still not connecting.
what is the next step? I have followed this thread and have the still have the same issues.
Can anyone please assist to get data off an S3 which sticks at the blue-backed throbbing SAMSUNG splash screen just after the android rocket take-off.
The history is that the phone started constant-rebooting and I left it off for a few weeks. Then I took it into a shop to get the power switch replaced and the repairer noticed that it no longer reboots, it just sticks at that SAMSUNG screen. When neither of us could get it into safe mode, he diagnosed that it was "definitely" a software problem. Resetting caches from recovery mode doesn't do anything and as I am trying to get data off it, I am a bit reluctant to follow other solutions I have found here and do a master reset!
I THINK this device is rooted (with towelroot)? See below
I can get to an Odin screen and can get the device recognised on the computer and wondered if I could do resets from there with one of the 4 files included with 3.07. Curiously enough one of them did succeed (though the success was too quick to convince me it had actually flashed very much) and the device did reboot but still got stuck at the same splash screen! Taking the battery out and restarting/cleaning caches again etc didn't help and now, none of the Odin files will 'flash' successfully, which is why I am not sure if I am still rooted or if something is returned to stock. I am just not sure which file or what exactly flashed successfully and what it did to the ROM, bootloader, CID, etc etc etc. SO I am assuming that if I can still load Odin and get the S3 recognised, it is still rooted.
Is there anything else I can try either through odin or independently to get me into the os please? I have loaded skipsoft and run it and it has connected to the S3 (and changed things) just by connecting to the computer in download mode: But I can't see where in skipsoft I can diagnose or correct whatever is wrong
Flash TWRP via Odin, boot into TWRP, mount data partition, connect the phone to a computer, and try to copy the phone's data to the computer.
What that guy said ^^^ Install a new OS for your system which should replace your old one. You don't need to boot TWRP if you are going to boot a new OS. My method involves you losing all your data so you have been warned. You can get the stable version for that here http://techbeasts.com/update-t-mobi...o-android-4-3-jelly-bean-t999uvuemjc-guide/2/. Good luck
Thanks for that guys but I have apparently already loaded Philz and it SAYS it has backed up the data and/or storage to sc card and I am wondering if Ican restore it to a new Galaxy J7. I especially need to figure out if I can restore telephone text messages from the S3 onto the J7 but i could make do for the moment with knowing whether such messages have made their way onto the SD card.
Yes, I am a bit reluctant to do a full wipe and restore until I can figure this out.
Or if I can access the files through my computer as you suggest, what file / format would they be in?
If you used Philz to create a backup, I don't think you'll be able to restore the data to the J7, but I could be wrong because Philz hasnt been updated for a long time which means there may be no Philz for the J7.
Philz can only be restored with Philz and possibly cwm.
I got Philz installed through Skipsoft but am wondering whether there is any newer utility I can install over whatever Skipsoft has put there? Or is that what TWRP is?
I am a bit reluctant to install anything through TWRP if it is going to not only overwrite the OS but also delete all the data I am trying to access! But is there any utility which might conceivably get my phone working again without deleting all my data please?
If I load T999UVUEMJC_T999TMBEMJC_TMB,md5 through Odin, will it delete all my data??
Flashing twrp should not over write the rom, only the recovery.
Was the phone recognized as a removable when it was booted into philz?
audit13 said:
Flashing twrp should not over write the rom, only the recovery.
Was the phone recognized as a removable when it was booted into philz?
Click to expand...
Click to collapse
Why did you ask me that? 'cos I was pretty sure it was recognised but checked again and it isn't recognised by the computer at all when I plug it in (and obviously isn't recognised by Odin)
Philz shows as Touch 6.26.6 and ClockworkMod v 6.0.4.8
Why would I ask? Because twrp can mount the phone as a removable drive to copy off the data as you wanted to do in your original post.
audit13 said:
Why would I ask? Because twrp can mount the phone as a removable drive to copy off the data as you wanted to do in your original post.
Click to expand...
Click to collapse
Sorry to harp but are we agreed generally that there is no way of getting this phone working again, - whether with some utility or by re-flashing the stock or some new ROM?
Once the phone starts hanging at that third throbbing SAMSUNG screen, is it effectively dead save only for the purposes of getting data off it as a media device please? I really need to access my text messages and couldn't even identify them on a file directory and wouldn't know what format they were in if I could access the file browser. That was sorta a last resort but I am now downloading T999UVUEMJC_T999TMBEMJC_TMB for installation through Odin? Or for installation through Philz if I can get the file onto the SD card.
Did you try twrp and use a otg usb?
It really depends on how much your time is worth.
audit13 said:
Did you try twrp and use a otg usb?
It really depends on how much your time is worth.
Click to expand...
Click to collapse
I will keep retrying to see if it is something I am doing wrong but whereas Skipsoft installed easily, i dont seem to be able to install twrp on this nonbooting pda?
If the phone is not recognised by the computer, either the drivers are not working properly, the USB port is damaged, or the USB cable is not compatible with Odin.
Until the phone is recognised in Odin, you can't flash a stock rom from sammobile.com.
audit13 said:
If the phone is not recognised by the computer, either the drivers are not working properly, the USB port is damaged, or the USB cable is not compatible with Odin.
Click to expand...
Click to collapse
I am not exactly a newbie at this but I am beginning to wonder if I havent just got a developing massive hardware failure. I have tried a number of computers, including ones which formerly recognised the computer/cable/S3 setup and none can now recognise the phone, eg in Odin.
The phone is detected on plugin to Windows 10 (with the recognition beep) and is then not seen in windows explorer. Changing cables doesn't do anything. I am assuming it should automatically appear on the drop-down menu in TWRP's app in the playstore. That menu only shows a phone I plugged into the system about 6 months ago (without it being rooted) and asks for root permissions on this now-nonexistent phone.
The phone is not now recognised as it was up till only a few days ago in XP. Nothing is now recognised on a Mac, though on all three units the phone charges.
Restarting in download mode a few times changes nothing.
audit13 said:
.Until the phone is recognised in Odin, you can't flash a stock rom from sammobile.com.
Click to expand...
Click to collapse
The only other thing I can think of is putting some TWRP file (?) on an SD card, booting into recover/Philz and can i not install TWRP or reflash some ROM from there?
I'm not sure if twrp can be flashed from Philz as I have always flashed TWRP via Odin.
You have done everything I would have done to get the phone recognized short of a installing a fresh installation of a Windows OS.
You could also try Heimdall (http://glassechidna.com.au/heimdall/).
I was running the Developer Preview Beta 2 and noticed that my device would no longer communicate correctly with my OTG usb jump drive, I tried all the normal trouble shooting techniques and nothing worked. I than tried connecting my phone to my computer and my computer would no longer connect to my device either. I didn’t think this was a big deal so I was going to just flash back to the May factory image from my computer.
This did not work, so I did a factory reset in TWRP hoping that this would clear out the issue that was stopping the phone from usb communication. It did not fix the issue. So normally in TWRP I can always plug a flash drive into the phone through the otg and explore the files, however for some reason this was still not possible, something has happened to the device where it no longer allows incoming or outgoing usb communication. The device still charges however it is no longer recognized at all by my computer nor does the device recognize usb drives. I have all the latest USB drivers and updates needed. I uninstalled and reinstalled my drivers on my computer as well. The main issue I feel like I am having here, is that the device no longer wants to communicate with usb asides from charging, this is why it is not seeing the otg storage when I plug it in while I am in TWRP.
I am at a loss, I can boot into twrp and explore the device, this is useless as i deleted all the files on the device, TWRP will not allow a usb to be found so i cannot flash anything to the device. My computer does not see the phone so i cannot fastboot anything to the device. I have tried everything, DUECS script, skipsoft, none of them have identified a device. This is further verified by running cmd and typing in adb devices, to which the response is a blank line.
How can a device be bricked, but somehow have TWRP recovery working, along with the ability to boot the device into fastboot/the bootloader (and yes the bootloader is unlocked still)? If anyone has any ideas of how I can get this thing to be recognized by my computer please let me know.
jasonstackhouse said:
I was running the Developer Preview Beta 2 and noticed that my device would no longer communicate correctly with my OTG usb jump drive, I tried all the normal trouble shooting techniques and nothing worked. I than tried connecting my phone to my computer and my computer would no longer connect to my device either. I didn’t think this was a big deal so I was going to just flash back to the May factory image from my computer.
This did not work, so I did a factory reset in TWRP hoping that this would clear out the issue that was stopping the phone from usb communication. It did not fix the issue. So normally in TWRP I can always plug a flash drive into the phone through the otg and explore the files, however for some reason this was still not possible, something has happened to the device where it no longer allows incoming or outgoing usb communication. The device still charges however it is no longer recognized at all by my computer nor does the device recognize usb drives. I have all the latest USB drivers and updates needed. I uninstalled and reinstalled my drivers on my computer as well. The main issue I feel like I am having here, is that the device no longer wants to communicate with usb asides from charging, this is why it is not seeing the otg storage when I plug it in while I am in TWRP.
I am at a loss, I can boot into twrp and explore the device, this is useless as i deleted all the files on the device, TWRP will not allow a usb to be found so i cannot flash anything to the device. My computer does not see the phone so i cannot fastboot anything to the device. I have tried everything, DUECS script, skipsoft, none of them have identified a device. This is further verified by running cmd and typing in adb devices, to which the response is a blank line.
How can a device be bricked, but somehow have TWRP recovery working, along with the ability to boot the device into fastboot/the bootloader (and yes the bootloader is unlocked still)? If anyone has any ideas of how I can get this thing to be recognized by my computer please let me know.
Click to expand...
Click to collapse
I would try a different cable as this device is very finicky; that solved my issue of the computer not recognizing the phone.
Is it possible that your device's USB port data transfer function is damaged, but the charging portion is functional, making it a weird hardware failure?
You know, like the old days when the charge port would break or wiggle loose, and sometimes it would charge and sometimes it wouldn't, depending on the angle of the cable in the mini usb port?
Az Biker said:
Is it possible that your device's USB port data transfer function is damaged, but the charging portion is functional, making it a weird hardware failure?
You know, like the old days when the charge port would break or wiggle loose, and sometimes it would charge and sometimes it wouldn't, depending on the angle of the cable in the mini usb port?
Click to expand...
Click to collapse
That would be nice if that were the problem, but unfortunalty I do not think it is. For example, when the issues first began, before I did the factory reset on the device, windows would pop up a message that said unknown device, and failure to connect. After the factory reset in TWRP the computer gave up all together in recognizing the phone. Another sign it was likely not a hardware failure was when the device was on and i was attempting to connect the otg usb to the phone it would give me some weird options. With android P the options were, allow this device to control the usb, or allow the USB to control the USB. that made no sense to me since why would i want the the USB to have any control, it couldnt do anything its not a computer its only a storage device. However, even though I had file transfer selected in developer options, it would not allow this connection. The options were all greyed out and it would not allow the pixel to have control over the usb device.
As for USB cords I have used without fail the google issued USB cord that came with the Pixel 1 xl, It has never faile me or had any issues. It is still fully functional as I was able to use it to connect my girls note 8 to my computer for file transfers and all other things my phone is not doing anymore.
I reached out to google and explained the situation to them, after i told them I was on Dev preview beta and they verified this to be true they told me this is likely a hardware failure and offered to replace the device. I am now waiting on the new device to be sent to me, however still cant accept that i cant recover the current device with an unlocked bootloader, TWRP installed, and access to fastboot/bootloader screen. I have seriously bricked phones before as in they would not even turn on and I was able to get them back up and running, this would be my first ever device I could not recover and what makes it worse is that it actually has TWRP installed and powers on and off just fine.
Sorry for the obvious question: Do you have the latest drivers? I don't have the drivers set to the whole system (Windows), so if I don't CD into my fastboot folder, I can't do anything because the system wide drivers aren't current. Don't know if that could be your issue?
I'm too lazy to fix the PATH of my drivers ¯\_(ツ)_/¯
I had an issue similar to this. I was trying to hook up a USB c to Ethernet adapter. It worked fine on April's patch but after I flashed Mays the phone wouldn't recognize it. After I plugged it in my phone rebooted and I no longer had access to developer options and it wouldn't read any usb device. Luckily I had a TWRP backup on my device. Once I flashed the backup which was only about a week old everything worked again. I haven't tried using the adapter again. I think something in the data partition got corrupted. I tried just restoring the boot and system partition and that didn't fix it. Try doing an advance wipe and formatting the data partition. That might get you back up and going.
have we even seen a bricked device yet?
twiz0r said:
have we even seen a bricked device yet?
Click to expand...
Click to collapse
I didn't think it was possible, I still dont understand how this is happening. For the other responses above, I have all the drivers up to date, and I already formatted data, wiped everything. At this point I would like to see if there is anyway to delete TWRP recovery from the device, anything, I have no OS on the device, but for some reason still have TWRP on both A and B.
I almost dont want to give the phone back to Google because I want to figure out what happened and how to fix it, its definitely not broken/bricked like you see when someone flashes the wrong files to a device, it just has no USB connection capabilities which in-turn have rendered the device useless.
When I had Samsung phones if you bricked a device to the point it doesn't even turn on correctly you could always save it still using ODIN. Its weird that the google flagship device and software doesn't have its own proprietary flash software like Samsung, LG and HTC, we just have adb/fastboot, I feel like if we did, i may be able to get this thing started again.
have you tried using something like quickboot from the playstore to be able to get to fastboot?
I had a similar thing happen a few weeks ago on oreo. PC wouldn't 'see' the phone, but it would charge very slowly.
I installed quickboot, booted to fastboot and was able to flash the factory image
Pyr0x64 said:
have you tried using something like quickboot from the playstore to be able to get to fastboot?
I had a similar thing happen a few weeks ago on oreo. PC wouldn't 'see' the phone, but it would charge very slowly.
I installed quickboot, booted to fastboot and was able to flash the factory image
Click to expand...
Click to collapse
I can't access the play store on the device in it's state. I do have access to fastboot. I can boot the phone to fastboot, and into TWRP, only problem is the phone doesn't communicate with the computer in either state. If the pixel had a SD card slot I would just load up a recovery but unfortunately we don't have that luxury
What cable are you using to connect to the PC? Is it USB c to USB c?
Sent from my Pixel 2 XL using XDA Labs
Triscuit said:
What cable are you using to connect to the PC? Is it USB c to USB c?
Sent from my Pixel 2 XL using XDA Labs
Click to expand...
Click to collapse
The cable is not the issue, I confirmed this by testing all my cables with the new device that I just received for my warranty exchange. I also tried my luck with Linux, after a complicated installation on my computer I was able to have Linux actually detect the device (partially) when the device was plugged in at splash screen I got nothing, at fastboot/bootloader screen nothing, but once the phone booted into TWRP it came up as AOSP device, when I attempted clicking on the AOSP device being detected by Linux an error message popped up telling me mtp or midi error, not sure for sure what one it said. Either way I couldn't connect for any transfer of information, I tried adb sideload and that failed as well.
This has been an experience for the memory books, glad that old device is gone and I'm back up and running on a working phone. No more beta testing for me, I'll be ready for Android P when they get it out of beta, I don't have the time or patience to deal with any more warranty exchanges.
Hi,
I dropped my Samsung Galaxy S4 mini device (I9195), and now the screen is broken and doesn't work anymore.
Now I want to save the data of the internal storage, but since I cannot unlock the phone and I don't have USB debugging enabled, it is difficult.
After reading many threads, I downloaded a Clockworkmod recovery ROM and flashed it with ODIN. However, I don't have ADB access (not even displayed in the device manager, only a volume under portable devices). I also tried TRWP.
Can anyone please tell me how to get the data?
Thank you!
PS: I also used dr.fone, but it fails to flash the recovery....