Q&A for [ROM][T211][4.4.2]Zephyr Tab v2,Rooted,Debloated,Odexed, NH1 TW Rom
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][T211][4.4.2]Zephyr Tab v2,Rooted,Debloated,Odexed, NH1 TW Rom. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
341464 said:
I can confirm that, it is VERY buggy.
After you start the tablet, wait for a couple of sec, you'd be greeted by nothing but a black screen.
You could tap the power on button twice to get it to work, but you'd only see the status bar, nothing else.
Sometimes tapping the back button and menu button randomly could get the Samsung setup wizard out, but even the wizard appears to be buggy.
First being during the Wi-Fi setup, when you're prompted to type in the Wi-Fi password, the keyboard would pop-up for a brief second and then go off again, making it impossible to type in anything.
Second is even if you skip all those, alright, the system appears to be working, the system, mobile data, yeah, those are fine.
However, the glitchiness continues, the power menu sometimes appears to be invisible, some of the pop-up option menu appears to be invisible, installing a third-party keyboard the UI element does not work properly either.
Also, the tablet hung up after installing some APKs through ADB, the status bar became distorted, I suspect that to be a system UI issue too.
All in all, all the rendered UI element appears to be buggy. That's the only thing that needs to be fixed.
Click to expand...
Click to collapse
Hello, i just flashed your ROM (v2) using latest CWM and according to your install instructions.
I am reporting that these problems (black screen during setup wizard, nonfunctional keyboard) also happened to me.
The ROM is therefore unusable, i cannot continue in further testing...
merlooo said:
Hello, i just flashed your ROM (v2) using latest CWM and according to your install instructions.
I am reporting that these problems (black screen during setup wizard, nonfunctional keyboard) also happened to me.
The ROM is therefore unusable, i cannot continue in further testing...
Click to expand...
Click to collapse
I discovered a fix quite a while ago. Unfortuneately, you must flash the stock 4.4 ROM image with Odin first, and then flash the recovery, AND THEN flash this ROM. Very tedious, and I wouldn't suggest using this one anyways. The other "Stock, deoxed" ROM that's on this subforum is somewhat better.
Nope nothing wrong with this ROM it is good esp when you flashed it with the latest Wolf Kernel.
Might be your firmware is coming from a diff region.
Sent from my SM-T211
great job. works fine
Gòogle Play cant connect error and Hangout too
Sent from my SM-T211 using XDA Free mobile app
andynroid said:
Gòogle Play cant connect error and Hangout too
Sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Which version are you on? Have you updated Google play services. Restart, try connecting again. Otherwise remove Google account from settings, restart and add the account again.
Zephyr Lite v 2, G900H
V3 of course let me try for the 3rd time later.
---------- Post added at 10:22 AM ---------- Previous post was at 10:00 AM ----------
Oh wait cant even pass signing to Play Store. My guess something is missing as V2 and V3 size in zip file is different.
Wish I could help but no PC at the moment
---------- Post added at 10:23 AM ---------- Previous post was at 10:22 AM ----------
Replied above BTW my contacts was able to DL from my Google a/c
andynroid said:
V3 of course let me try for the 3rd time later.
---------- Post added at 10:22 AM ---------- Previous post was at 10:00 AM ----------
Oh wait cant even pass signing to Play Store. My guess something is missing as V2 and V3 size in zip file is different.
Wish I could help but no PC at the moment
---------- Post added at 10:23 AM ---------- Previous post was at 10:22 AM ----------
Replied above BTW my contacts was able to DL from my Google a/c
Click to expand...
Click to collapse
The only files deleted in v3 is stock exchange and email and included Gmail exchange. Should not cause this issue. I have myself updated all apps from playstore.
Zephyr Lite v 2, G900H
Sorry Dude for the trouble for this...let me try rite now
andynroid said:
Sorry Dude for the trouble for this...let me try rite now
Click to expand...
Click to collapse
No trouble buddy. Happy to help.
Zephyr Lite v 2, G900H
Dunno what is the issue V2 works with no problem at all but with V3 cant synch properly and clicking on Google Search it freezes and forced closed.
Now back to V2 still good for me, might be that Egypt FW does not fancy Malaysia based :banghead:
andynroid said:
Dunno what is the issue V2 works with no problem at all but with V3 cant synch properly and clicking on Google Search it freezes and forced closed.
Now back to V2 still good for me, might be that Egypt FW does not fancy Malaysia based :banghead:
Click to expand...
Click to collapse
Have you tried clean install. Would suggest you backup, clear cache, dalvik, format /system and flash. Meanwhile Spain firmware NJ3 is out. Am trying to download from sammobile but just stops in between. Will try to get it today.
Zephyr Lite v 2, G900H
Yup wiped every partition including cache dalvik before reboot.
Sammobile dunno what is taking them so long for the October version. Maybe Sammy is still working on it..so slow
andynroid said:
Yup wiped every partition including cache dalvik before reboot.
Sammobile dunno what is taking them so long for the October version. Maybe Sammy is still working on it..so slow
Click to expand...
Click to collapse
I am uploading version 4 with NJ3 base. I hope you will not face the problems you had with v3
Zephyr Lite v 2, G900H
No luck on V4 I guess this is a region issue. But to be honest V2 is good enough with OC to 1.4GHz Thanks to you and @laufersteppenwolf
BTW have a question how to re-enable back boot screen animation ?
I need to mirroring screen on chromecast device using SM-T211.
I try mirror-enabler from forum . xda-developers . com /hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193
but with my stock ROM 4.4.2 doesn't work, I have not audio.r_submix.default.so file in /system/lib/hw directory
Do you think that using this ROM I can reach my purpose ?
tulkas85 said:
I need to mirroring screen on chromecast device using SM-T211.
I try mirror-enabler from forum . xda-developers . com /hardware-hacking/chromecast/experimental-enable-mirroring-device-t2812193
but with my stock ROM 4.4.2 doesn't work, I have not audio.r_submix.default.so file in /system/lib/hw directory
Do you think that using this ROM I can reach my purpose ?
Click to expand...
Click to collapse
Sorry you will have to try it yourself cause I do not use it myself. If stock rom could not help you, then I doubt this will.
Zephyr Lite v 2, G900H
need help signature verification failed
I'm new to this please help. Tried installing but getting error as Signature verification failed. Could you please list the exact steps.
aviborse said:
I'm new to this please help. Tried installing but getting error as Signature verification failed. Could you please list the exact steps.
Click to expand...
Click to collapse
Please make sure you are on latest recovery. Also if you were on JB, flash stock Kk rom first, root, install recovery, flash my rom
Zephyr v3, G900H
Related
GigaWatts Pro
Thanks to msw141 and m_carleone82 for testing the first version and posting that it didn't work. It is very difficult to create a rom for a device you don't own. I really appreciate everyone testing and giving feedback so I can work on fixing it.
Whose up for round two? I even added the option to debloat the rom yourself through the Aroma Installer as several people requested.
Stock kernel, P900UEU1ANC5 firmware base, knoxless, deodexed, zipaligned, init.d support, busybox and rooted.
Happy flashing and be sure to post feedback so we can get this up and running!
DOWNLOAD
Jason G Watts
Honored to be first to reply. . I thing this will open the first door. . I will try it so soon. Thanks..
Hope this could be combine with ketans multitool rom installer.
Sent from my SM-P900 using XDA Premium 4 mobile app
Awesome, great to know that I can use this as a backup. I'm already rooted and debloated, so I probably won't be flashing this any time soon unless something happens with mytablet.
Thanks for your hard work, though
I'd love to see this with an Aroma installer with options to pre-debloat. Like larkhillv, I'll keep this as a backup in case I mess something up. Thanks for your work!
ExtremeRyno said:
I'd love to see this with an Aroma installer with options to pre-debloat. Like larkhillv, I'll keep this as a backup in case I mess something up. Thanks for your work!
Click to expand...
Click to collapse
+1 for Aroma
Thank you!!!
Sent from my SM-N900V using Xparent Green Tapatalk 2
Thank you for getting things kicked-off.
Has anyone that's rooted installed this yet?
We must have one for the P905 with aroma nad a custom kernel, WE MUST.
Thank you for your work.
Awesome I'm gonna try it tonight!:laugh:
bigfamei said:
+1 for Aroma
Click to expand...
Click to collapse
+100500 for Aroma!
With the ATT Note 12.2 launching in a few hours it couldn't have come at a batter time.
Me getting one really comes down to some custom ROM's. I have the N3 which was very good stock, but phenomenal with a custom TW rom.
Has anyone installed this ROM yet?
The development thus far on this device has been disappointing. I appreciate the work being done by the OP on this! Hopefully this will kick things off.
nashwing said:
Has anyone installed this ROM yet?
The development thus far on this device has been disappointing. I appreciate the work being done by the OP on this! Hopefully this will kick things off.
Click to expand...
Click to collapse
Honestly, it's a niche tablet, so I wouldn't expect much development in the future. It's a huge tablet (for most people) and the price tag is pretty high unless you can find it on sale.
I bought mine at Best Buy on a whim for around $650 with the free Samsung blue tooth keyboard specifically made for the Pro 12.2 (keyboard retails for $130, so it wasn't a terrible deal)
Plus, I feel like unless you either want a huge screen and/or want a large canvas for digital drawing/painting, then this probably isn't a smart choice for most people. I wanted both a large tab and a Note for drawing, so this was kind of a no brainer for me. ~$600+ probably isn't in the range of most consumers, though.
nashwing said:
Has anyone installed this ROM yet?
Click to expand...
Click to collapse
I tried to flash this from TWRP but it failed. Is it not supposed to be installed that way?
I tried with TRWP too. and failed..
as I remember something like eror : "cant execute binary" etc..... I had soft brick.. so needed to revert back with odin.
msw141 said:
I tried to flash this from TWRP but it failed. Is it not supposed to be installed that way?
Click to expand...
Click to collapse
Thanks for testing the first version and letting me know it failed.
m_carleone82 said:
I tried with TRWP too. and failed..
as I remember something like eror : "cant execute binary" etc..... I had soft brick.. so needed to revert back with odin.
Click to expand...
Click to collapse
Thanks for testing the first version and letting me know it failed.
Are we good with new version that works?
Sent from my SM-P900 using XDA Premium 4 mobile app
I didn't notice an update until you posted your reply, thanks. I just downloaded v2 and flashed it. Guys.....its working! I'm in the Aroma installer now. Will let you know once it is finished if things seem to be working.
---------- Post added at 04:09 PM ---------- Previous post was at 04:01 PM ----------
msw141 said:
I didn't notice an update until you posted your reply, thanks. I just downloaded v2 and flashed it. Guys.....its working! I'm in the Aroma installer now. Will let you know once it is finished if things seem to be working.
Click to expand...
Click to collapse
Booted up, custom splash screen I chose was there. First error I encountered was "Unfortunately, Application installer has stopped" after swiping to unlock. May have gone a bit too custom crazy in deselecting stock apps.
Will reflash and choose more stock options and see how it improves.
Very promising though so far.
---------- Post added at 04:28 PM ---------- Previous post was at 04:09 PM ----------
msw141 said:
I didn't notice an update until you posted your reply, thanks. I just downloaded v2 and flashed it. Guys.....its working! I'm in the Aroma installer now. Will let you know once it is finished if things seem to be working.
---------- Post added at 04:09 PM ---------- Previous post was at 04:01 PM ----------
Booted up, custom splash screen I chose was there. First error I encountered was "Unfortunately, Application installer has stopped" after swiping to unlock. May have gone a bit too custom crazy in deselecting stock apps.
Will reflash and choose more stock options and see how it improves.
Very promising though so far.
Click to expand...
Click to collapse
OK reflashed with most everything stock selected with the addition of Wanam and Busybox. During boot get the startup animation fine. Then "Upgrading Android" message appears again and counts up. Then lock screen. When lock screen swiped away the screen is black and the same application installer error appears. You can get to some things like task manager and swipe down the notification drawer but it is unuseable in this state.
I will add this, and keep in mind I'm not really experienced with this stuff----it doesn't seem like it installed a new rom as much as tried to make modifications to what I had. My account info and most of my apps were still there based on what I could see in the menus I could still access. I would expect that flashing this would have required walking through the fresh install initialization. Maybe it is related to the application installer error I'm getting.
Hope this info was helpful. Looking forward to a v3.
I am goıing to try it in a few days too..Lets see what we have . thanks for hard work..
Q&A for [ROM] CM11 Development for T210(R)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] CM11 Development for T210(R). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Keep up the great work. Looking forward to some updates, wouldn't mind running CM11 on a Touchwiz tablet. It'll definitely increase performance. I have CM11 on my S4 Mini and it's fantastic. Much better than the slow Touchwiz stock ROMs. Samsung needs to learn a few things from you awesome developers!
Well done for the great progress and to even be able to run CM11 at this early stage is a big accomplishment!
I bow down to your awesomeness! +1,000
Cm11 first stable build link
Mustafa's Tab cihazımdan Tapatalk kullanılarak gönderildi
Is it hard to load cm 11 on a note 3?
Sent from my SAMSUNG-SM-N900A using XDA Free mobile app
Wi-fi won't turn on?
I used this rom and flashed it as normal, but Ii am having wi-fi issues. The wi-fi will not turn on and the wi-fi icons are grey instead of white. I tried another factory reset and wiped the cache, but to no avail. What do I do? No internet on it - I'll die of sadness.
Thanks in advance,
CyanidePi
CyanidePi said:
I used this rom and flashed it as normal, but Ii am having wi-fi issues. The wi-fi will not turn on and the wi-fi icons are grey instead of white. I tried another factory reset and wiped the cache, but to no avail. What do I do? No internet on it - I'll die of sadness.
Thanks in advance,
CyanidePi
Click to expand...
Click to collapse
Read the OP.
gr8nole said:
Read the OP.
Click to expand...
Click to collapse
Okay, I assume you mean give more detail? (btw thanks for making it possible to have CM11 on my Tab- even though it's not working ATM Ii appreciate the effort put into it!) I'm running 4.4.2 KitKat, and I'll try to run through what I did from the beginning:
1. Loaded CWM onto the Tab through Download Mode via ODIN. Went well.
2. Rebooted and loaded the CM11 PreAlpha 3 from my pc onto the Tab. No problems.
3. Booted into recovery. Did not back up, as I factory resetted the tab a day or so before trying this (I know I should have done it anyway though...). Went well.
4. Installed the CM11 zip. Loaded fine, but the ROM didn't start up (stayed in spinning animation) and I had to leave the Tab to run out of gas before I tried it again.
5. After trying to reinstall the CM11 ROM, it loaded up fine. Was slightly laggy, but no other problems. Until....
6. Tried to turn on Wi-Fi in setup. Wouldn't turn on, and I thought it was a little bit weird. Continued to set up without a CM account.
7. Tried to turn on wi-fi. Didn't work. Went into settings, would turn on but would still display "turn on wifi" and wouldn't display any routers. Tried to scour the web for help, and decided to factory reset the Tab again. Also cleared cache.
8. Same thing happened again. Tried re-flashing CM. Didn't help.
9. Now trying to sideload the PreAlpha 2 because the Tab is taking a long time to turn on, i.e. won't escape the startup logo (this time Samsung).
That's about what I did. Any help?
CyanidePi said:
Okay, I assume you mean give more detail?
Click to expand...
Click to collapse
No, I meant for you to actually read the OP (original post). It clearly states "THIS ROM IS NOT READY FOR THE COMMON USER" and also states "Please do not post bug reports for the time being. I am aware that it has many, many issues. Please only post relevant DEVELOPMENT discussion."
gr8nole said:
No, I meant for you to actually read the OP (original post). It clearly states "THIS ROM IS NOT READY FOR THE COMMON USER"
Click to expand...
Click to collapse
Oh. So it does. Ah well, I guess I'm gonna have to see this through or try and install the stock rom again. Sorry for wasting your time.
Am I the only one not being able to install CM11 at all? I just install it from philz and reboot system and it just goes back to recovery. Help? Been trying everything here.
cm11 alpha kernel
I tried to install cm11 alpha on my tab 3 7.0, but after I flashed it it went back to twrp and it never installed. Do I have to install a kernel with it? thanks
tupolevpilot said:
I tried to install cm11 alpha on my tab 3 7.0, but after I flashed it it went back to twrp and it never installed. Do I have to install a kernel with it? thanks
Click to expand...
Click to collapse
Same question here
Hope we get cm11
Sent from my SM-T210R using XDA Free mobile app
Can I try to install this ROM on SM-T211 ?
I know that data connection will be unavaible. But there will be others problems ?
No wifi any help
Sent from my SM-T210 using XDA Premium 4 mobile app
---------- Post added at 02:23 PM ---------- Previous post was at 02:06 PM ----------
Do you need a kernel or something
Sent from my SM-T210R using xda premium?
Read the op from the original thread.
Sent from my MB886 using XDA Free mobile app
Still supported?
Is this still supported or discontinued already? My tab suuucks agh.
cm11 unofficial for tab 3 sm-t210(r)
Hi, i was wondering if cm11 for the tab 3 7.0 will still be worked on?
Thanks
whether there will be stable version whether or not
gr8nole said:
Read the OP.
Click to expand...
Click to collapse
Hello Friends apologize bother me know if whether there will be a stable version this cm11 for the T210 (R)
I think cm11 is getting closer to having wifi. Can anyone tell if camera, video is working. If it has wifi, camera and video its enough of a cm to me.
Sent from my SM-T210 using XDA mobile app
Q&A for [ROM][5.0.1][BLISSPOP][OFFICIAL][SINGLESIM]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.1][BLISSPOP][OFFICIAL][SINGLESIM]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
BBM force close
jackeagle said:
snip, mod edit OP quote removed
Click to expand...
Click to collapse
hey, i try this rom and that awesome...but the bbm app always close "Unfortunately, bbm has stoped" everytime i open the app...anyone can solve the problem? i think cause the incompatible with ART
Updates?
(I hope for) Will there be regular updates for one more official roms for SGG ?
Good work! will try it soon
thepoetofthefalls said:
(I hope for) Will there be regular updates for one more official roms for SGG ?
Good work! will try it soon
Click to expand...
Click to collapse
Yes It will have regular updates (Weekly Based)
---------- Post added at 08:10 PM ---------- Previous post was at 08:09 PM ----------
fickyboy said:
hey, i try this rom and that awesome...but the bbm app always close "Unfortunately, bbm has stoped" everytime i open the app...anyone can solve the problem? i think cause the incompatible with ART
Click to expand...
Click to collapse
Plz Dont quote OP its against xda rules Regarding issue m sorry but i cant support issues with 3rd parts apps has may be they are not yet optimized for lollipop completly
Features not working ?? indian baseband?
hey @jackeagle,
great rom
just want to know the features not working and also is the indian baseband supported ??
and is CM12 calling disturbance bug fixed in your rom??
Great ROm for galaxy grand!
oh thanks guys, but will have support for Dual Sim ?
Crash!!
I get crash reports as soon as my galaxy grand opens with the blisspop rom..
I did everything as mentioned but no luck... I flashed back to cm12, works fine... help please
Awesome ROM
The Features are awesome .... Thanks a lot
Unpinning works with navigation buttons.But it doesn't happen in hardware buttons. Please look into that.
Great ROM works fine
---------- Post added at 03:06 PM ---------- Previous post was at 03:01 PM ----------
Gwache said:
I get crash reports as soon as my galaxy grand opens with the blisspop rom..
I did everything as mentioned but no luck... I flashed back to cm12, works fine... help please
Click to expand...
Click to collapse
-Clean wipe cache
-wipe Dalvik cache
-complete wipe (reset the phone)
-Install the ROM
-install the Gapps
thats it you are done.
The Rom has many features than cm12
this is about ur ROM .
I have just gone through ur rom.its amazing n smooth too.I love ur ROM but can u please built ur next build with dual sim enable please...and sir when we enable navigation bar the settings gets crashed. N these kind of bugs i have faced when i was doing customization u have provided in the build and I have done the same as u have told to do for the installation. Fully wiped.
Is the rom support root?? Thanks.
Abo altawfiq said:
Is the rom support root?? Thanks.
Click to expand...
Click to collapse
Yep.
There is a problem with battery life it down from 45% to 0% in 15m
Awsum work dev...another lollipop rom for our super galaxy grand...thanks alot.:thumbup:
Can someone pls tell me about the features it has different from cm12.
Thnks in advance.
Excellent work @jackeagle
Sent from my GT-I9082 using XDA Free mobile app
disable hardware keyz
Navigation bar dimensions dosenot works
Force close appears
And hardware keys are not disabled
Pleasefix it
And get extra more features
With high performance rom
bharath143 said:
Navigation bar dimensions dosenot works
Force close appears
And hardware keys are not disabled
Pleasefix it
And get extra more features
With high performance rom
Click to expand...
Click to collapse
Lollipop is new, we are lucky to have even 1 rom for our grand.
So stop asking for features since they will be added as time passes by. Performance will also increase in due time.
j
NoobInToto said:
Lollipop is new, we are lucky to have even 1 rom for our grand.
So stop asking for features since they will be added as time passes by. Performance will also increase in due time.
Click to expand...
Click to collapse
We have endless rom for grand
Many lollipop roms
So stop saying lucky for even 1 rom
bharath143 said:
We have endless rom for grand
Many lollipop roms
So stop saying lucky for even 1 rom
Click to expand...
Click to collapse
I meant we are lucky to have lollipop roms, be it one or many.
Our lollipop are built from source. Our devs don't add features of their own. When the source is updated, our ROMs will be updated. So you can estimate yourself when the next build will be available.
double tap to wake
Does double tap to wake workss in setting in display
If it work 10/10 for this rom
same problem
yeah i faced a same fc while opening the nav bar dimensions
also when opening the owner info shows a blank screen doesnt show ant text!
Gallery Get's crashed and does not let upload pictures from any application
hey @jackeagle,
The gallery app is getting crashed as soon as i open the app and while browsing pictures it says "unfortunately android.process.media has stopped" and force me to FC or it hangs. it has the same problem with even google+ photo gallery app too.
it is also not showing pictures. (screenshot attached).
if iam using any other galley application it works fine.
i have attached the logcat and also screenshots showing the problem. please help.
its same with after the 1.3 update too and now google play services are crashing and sync error problems have started..
Q&A for Tweaked Lollipop Note 3 Coming soon
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for Tweaked Lollipop Note 3 Coming soon. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
is this a rom a can flash?? do I have to flash any extra stuff??
You don't have to flash anything Extra at the moment it can be use as daily driver bugs still being repair update are coming
Sent from my SM-N900T using XDA Free mobile app
MasterX007 said:
You don't have to flash anything Extra at the moment it can be use as daily driver bugs still being repair update are coming
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Idk what I did wrong i flashed then i was stuck at a bootload at the samsung note 3 screen..... But this has happen with all the tw lollipop roms i have tried to flash so i dont know what i am doing wrong
desean93 said:
Idk what I did wrong i flashed then i was stuck at a bootload at the samsung note 3 screen..... But this has happen with all the tw lollipop roms i have tried to flash so i dont know what i am doing wrong
Click to expand...
Click to collapse
What model of Note 3 are you using and recovery you using?
MasterX007 said:
What model of Note 3 are you using and recovery you using?
Click to expand...
Click to collapse
I have a Tmobile note 3 and i am using philz touch recovery
desean93 said:
I have a Tmobile note 3 and i am using philz touch recovery
Click to expand...
Click to collapse
in philz rec choose the option wipe to install clean rom and flash the Rom aafter just reboot the device let it boot its normal for it to take up to 10 minutes during the first boot
I am also on N900T it is working great
MasterX007 said:
in philz rec choose the option wipe to install clean rom and flash the Rom aafter just reboot the device let it boot its normal for it to take up to 10 minutes during the first boot
I am also on N900T it is working great
Click to expand...
Click to collapse
Ok.... Will try again So I dont need to flash a kernal?? For some reason I believe my problem is the kernal because any time I flash a custom rom and dont flash a kernal the rom doesnt want to boot up and Im stuck on the note 3 screen
desean93 said:
Ok.... Will try again So I dont need to flash a kernal?? For some reason I believe my problem is the kernal because any time I flash a custom rom and dont flash a kernal the rom doesnt want to boot up and Im stuck on the note 3 screen
Click to expand...
Click to collapse
no need to flash a kernel one is already provided in the Rom
MasterX007 said:
no need to flash a kernel one is already provided in the Rom
Click to expand...
Click to collapse
Ok.... Thank you so much!!! I will give it another try after this one didnt work... I had given up but I will try and flash again.... I will let you know the turnout
Thanks for the ROM. I'll be testing and report back on how it works for me.
One issue I immediately see if that wifi seems to not be working for me. Every time I try and turn it on, it is either greyed out and I can't toggle it, or if I am able to toggle it, it just doesn't do anything. I rebooted, still same issue. I think I flashed it properly (I wiped data, cache, dalvik, system), but I may try flashing again.
Has anyone else had this problem and is there a fix for this?
EDIT: Did a second full wipe and flash and still no wifi. Everything else seems to work connection wise, airplane mode, bluetooth, mobile data, just not wifi.
Already fix that problem
A new update should be here soon it is being uploading to mega wifi is fix
Sent from my SM-N900T using XDA Free mobile app
MasterX007 said:
Already fix that problem
A new update should be here soon it is being uploading to mega wifi is fix
Sent from my SM-N900T using XDA Free mobile app
Click to expand...
Click to collapse
Yup. That fixed it. Thanks.
I'm not having success getting Xposed Framework running on this ROM. Is there a way to get it working? Screenshot included.
want know how fix the heating and the loudness twerkv1 for n900t android 5.0
please can anyone tell me how to fix or conf the sound on this rom please
Techngro said:
I'm not having success getting Xposed Framework running on this ROM. Is there a way to get it working? Screenshot included.
Click to expand...
Click to collapse
Not yet compatible. Gotta wait for Xposed developer to make it compatible.
---------- Post added at 11:47 AM ---------- Previous post was at 11:46 AM ----------
mr adrian said:
please can anyone tell me how to fix or conf the sound on this rom please
Click to expand...
Click to collapse
You can look in the ROM thread for a fix...on page 4 or 5.
DPI change?
Hey, the ROM is still going smooth. No real issues so far (except my battery life isn't as good as before, but it's not terrible or anything).
I have been trying to change the DPI on this ROM, but I have not been able to make it stick. I have tried using the build prop editor app as well as directly editing the build prop via ES File Explorer. Neither has worked. Has anyone been able to change their DPI or is there something specific that I need to do to get it working?
Techngro said:
Hey, the ROM is still going smooth. No real issues so far (except my battery life isn't as good as before, but it's not terrible or anything).
I have been trying to change the DPI on this ROM, but I have not been able to make it stick. I have tried using the build prop editor app as well as directly editing the build prop via ES File Explorer. Neither has worked. Has anyone been able to change their DPI or is there something specific that I need to do to get it working?
Click to expand...
Click to collapse
Look in your battery stats see whats causing it
Sent from my SM-N9005 using XDA Free mobile app
I keep getting "invalid argument" when I try to download the mixerpath.xml for normal sound.. Is there another link for it?
bigdreco said:
I keep getting "invalid argument" when I try to download the mixerpath.xml for normal sound.. Is there another link for it?
Click to expand...
Click to collapse
Alright im going to post another link
Sent from my SM-N9005 using XDA Free mobile app
Q&A for [ROM] [ONLINE] InspireKat v1.4 [4.4.2 KitKat] [SM-T210R] [7/1/2015]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [ONLINE] InspireKat v1.4 [4.4.2 KitKat] [SM-T210R] [7/1/2015]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Inspirekat 1.4
Hi and thanks for a great ROM.
Theres a lot of stuff on there I'll never use (crosses fingers for a skinnykat ), but its all easy enough to remove.
Ive been using Rocket tab on my tab until recently I found a few bluetooth devices wouldnt pair (on two tab 3's both with rocket tab, stock jellybean worked). I also realised how out of date I'd become , had no idea kitkat was available for tab 3
I just have a couple of quickish questions.
My tab spends most of its life mounted in the car as a gps and media player, I rely on it heavily for work (lots and lots of driving around).
Which brings me to question number 1.... You disabled home button wake, how do i get it back? The power button is hard to reach when mounted.. especially when driving Ive looked in /system/usr/keylayout/generic.kl and have 'key 172 HOME WAKE'. Thats as far as I can get.
Secondly how to i get my long press Back button to kill again instead of the pop up multi window tray thingy?
the guides on the net pretty much say its all in the settings menu.. not mine. :s bugger.
apart from those two gripes ..im probably in the minority wanting these features .. an awesome rom,.
Thanks man.
Inspirekat
works fine on galaxy tab 3 7.0 SM-T20 too.
yess, this rom is the best.
I like it
Inspirekat v1.5
I cant reply because Im new here, So I made it.
I hope you've seen this
I saw a question from here
http://forum.xda-developers.com/galaxy-tab-3/development-7/rom-inspirekat-v1-0-t3119776
from Cristiano Lira
--Doesn't work in SM-T210?
well I does,
it works on galaxy tab 3 SM-T210,
i tried it already on my tab 3 7.0 SM-T210
and works fine
rhamskhy said:
I cant reply because Im new here, So I made it.
I hope you've seen this
I saw a question from here
http://forum.xda-developers.com/galaxy-tab-3/development-7/rom-inspirekat-v1-0-t3119776
from Cristiano Lira
--Doesn't work in SM-T210?
well I does,
it works on galaxy tab 3 SM-T210,
i tried it already on my tab 3 7.0 SM-T210
and works fine
Click to expand...
Click to collapse
That is true buddy but i can't fully guarantee that you won't encounter any problems now or later on
Sent from my SM-T210R using Tapatalk
---------- Post added at 02:04 AM ---------- Previous post was at 01:58 AM ----------
AJ Rimmer said:
Hi and thanks for a great ROM.
Theres a lot of stuff on there I'll never use (crosses fingers for a skinnykat ), but its all easy enough to remove.
Ive been using Rocket tab on my tab until recently I found a few bluetooth devices wouldnt pair (on two tab 3's both with rocket tab, stock jellybean worked). I also realised how out of date I'd become , had no idea kitkat was available for tab 3
I just have a couple of quickish questions.
My tab spends most of its life mounted in the car as a gps and media player, I rely on it heavily for work (lots and lots of driving around).
Which brings me to question number 1.... You disabled home button wake, how do i get it back? The power button is hard to reach when mounted.. especially when driving Ive looked in /system/usr/keylayout/generic.kl and have 'key 172 HOME WAKE'. Thats as far as I can get.
Secondly how to i get my long press Back button to kill again instead of the pop up multi window tray thingy?
the guides on the net pretty much say its all in the settings menu.. not mine. :s bugger.
apart from those two gripes ..im probably in the minority wanting these features .. an awesome rom,.
Thanks man.
Click to expand...
Click to collapse
hi buddy thanks for your kind words
About long press to kill it is a mod that i would have to find a guide somewhere on xda because i don't know the coding for it and unfortunately i havent found a guide for kitkat that works and I have looked everywhere
Samsung devices don't have this feature built in btw
About the home button wake being disabled check my ROM Addons/Mods section in first post of my ROM Thread (OP) and flash the mod there in recovery
Sent from my SM-T210R using Tapatalk
Did you just add that?! ..because Im sure it wasnt there the other day when i looked
Exactly what I need, thanks.
As for the back button kill.. I thought it was stock in jellybean and removed in kitkat :s ignorance is bliss huh
Guess I got some reading to do
cheers man
archivo param.bin
AJ Rimmer said:
Did you just add that?! ..because Im sure it wasnt there the other day when i looked
Exactly what I need, thanks.
As for the back button kill.. I thought it was stock in jellybean and removed in kitkat :s ignorance is bliss huh
Guess I got some reading to do
cheers man
Click to expand...
Click to collapse
hello friends I am new to the forum, persent know if any of you can help me conseguier the file param.bin sansung galaxy tab 3 GT-P5200, it is that erro modify it and now I get the logo of sanung galaxy s3 . greatly appreciate your help. Thank You.
AJ Rimmer said:
Did you just add that?! ..because Im sure it wasnt there the other day when i looked
Exactly what I need, thanks.
As for the back button kill.. I thought it was stock in jellybean and removed in kitkat :s ignorance is bliss huh
Guess I got some reading to do
cheers man
Click to expand...
Click to collapse
Give THIS app a try for back button to kill.
I tried to install this rom and it gave me a "E: Unable to mount '/system' error and it says there is no rom to install. I was on another rom before this without issues. Flashing with TWRP 2.8.2.0, any thoughts?
---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------
schellbl.bs said:
I tried to install this rom and it gave me a "E: Unable to mount '/system' error and it says there is no rom to install. I was on another rom before this without issues. Flashing with TWRP 2.8.2.0, any thoughts?
Click to expand...
Click to collapse
I tried flashing it again and it worked. I'm not sure what happened the first time.
schellbl.bs said:
I tried to install this rom and it gave me a "E: Unable to mount '/system' error and it says there is no rom to install. I was on another rom before this without issues. Flashing with TWRP 2.8.2.0, any thoughts?
---------- Post added at 05:53 AM ---------- Previous post was at 05:48 AM ----------
I tried flashing it again and it worked. I'm not sure what happened the first time.
Click to expand...
Click to collapse
There is a twrp issue for v2.8.2.0 when getting mount /system error and rom install error when flashing roms after wiping
The workaround is after you wipe go to the mount menu in Twrp recovery and uncheck mount system and then proceed to flash my rom
Sent from my A0001 using Tapatalk
---------- Post added at 11:20 PM ---------- Previous post was at 11:18 PM ----------
gr8nole said:
Give THIS app a try for back button to kill.
Click to expand...
Click to collapse
Hey i see your back developing i am glad you are back on xda
Sent from my A0001 using Tapatalk
JT1510365 said:
Hey i see your back developing i am glad you are back on xda
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks, I still pop in to answer a question every now and then, but that's about it.
Sent from my SM-G920V using Tapatalk
Thanks 4 the awesome rom. Runs smooth as silk. I am disabled and have tried most available roms 4 this tablet. I have plenty of time so I've flashed several. Yours by far is the best. Thanks!!
Custom Kernel
Is it possible to use the werewolf kernel with this Rom? Thanks In Advance
good rom
rom very good friend but I doubt that the screen is only switched on with the power button and not with the home button when locked
Levis335 said:
rom very good friend but I doubt that the screen is only switched on with the power button and not with the home button when locked
Click to expand...
Click to collapse
Thanks but yes by default the screen can only be turned on only by the power button and not by the home button! Why are you doubting this feature i would never lie to the people who use my ROM and i actually tested this on my tablet
Sent from my SAMSUNG-SGH-I337 using Tapatalk
---------- Post added at 05:24 PM ---------- Previous post was at 05:23 PM ----------
n00b15 said:
Is it possible to use the werewolf kernel with this Rom? Thanks In Advance
Click to expand...
Click to collapse
Idk but I wouldn't recommend it!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
InspireKat v2.3
Hello, Jon Tranchida! AKA: JT1510365
Thanks for reading my comment!
I just have a small request for you. Could you make a .tar version of the rom?
I am not asking for much, just another way to flash your GREAT rom with ODIN.
My reason is because when I try to flash the rom with TWRP, (I have TWRP v2.8.0.0 by the way),
this error message occurs:
Code:
E: Error executing updater binary in zip
'/sdcard/InspireKat-v2.3-ROM-Release.zip'
I have an SM-T210R (It02wifi) and I can't boot into android system, so I am stuck on recovery!
I also can't use ADB sideload because it doesn't work!
I've been searching for a long time and have not found anything!
If you can't make a .tar version, then could you or anyone else tell me other ways of flashing the rom?
Thank you for reading, and please consider my request. :fingers-crossed:
P.S: This is driving me crazy!
inspirekat 2.4 sdcard writable
Hi,
I've been using xda forums since 2003 , but, I've never posted.
Having said ghe above, plz forgive any rules etc., I might not be following.
Coming to the question, samsung galaxy tab 3 sm-t210 stock rom was doing fine until abt a year ago when google / samsung 4.2.2 kitkat took away our sdcard writable options. Now , I cannot update or install most of my apps as they were on the external sdcard. I can however update and install on the internal sdcard, which is extremely running low on space.
Does inspirekat 2.4 sort this problem and can I freely update , move to and install on my external sdcard?