I had problems with the Magnector X adapter not working well with my z3 with a case. This one looks a lot more friendly and is more high quality than the ones coming out of China. Just ordered one. Will report back when I get it.
http://www.amazon.com/MicroUSB-MAgnetic-Connector-Adaptor-Xperia/dp/B00KNLFS9E
aaronchi24 said:
I had problems with the Magnector X adapter not working well with my z3 with a case. This one looks a lot more friendly and is more high quality than the ones coming out of China. Just ordered one. Will report back when I get it.
http://www.amazon.com/MicroUSB-MAgnetic-Connector-Adaptor-Xperia/dp/B00KNLFS9E
Click to expand...
Click to collapse
I hate how the magnector ones are very weak moving them laterally up and down. But its very strong if you try to pull it straight off.
aaronchi24 said:
I had problems with the Magnector X adapter not working well with my z3 with a case. This one looks a lot more friendly and is more high quality than the ones coming out of China. Just ordered one. Will report back when I get it.
http://www.amazon.com/MicroUSB-MAgnetic-Connector-Adaptor-Xperia/dp/B00KNLFS9E
Click to expand...
Click to collapse
Hmm @ 21$ (with shipping included) wouldnt it make more sense to just buy a Magnet Connector Wire by itself instead of an adapter?
unk3 said:
Hmm @ 21$ (with shipping included) wouldnt it make more sense to just buy a Magnet Connector Wire by itself instead of an adapter?
Click to expand...
Click to collapse
The Magnector X adapter is $15 and the Magnector X cable is $18 so they are comparable in price and are higher quality than the ones you can get from China. I'm hoping I get a faster charge speed with this adapter than the one I have now.
unk3 said:
Hmm @ 21$ (with shipping included) wouldnt it make more sense to just buy a Magnet Connector Wire by itself instead of an adapter?
Click to expand...
Click to collapse
I prefer adapters. When the cable fails you swap out with another micro-usb. This is what I did with Apple lightning connectors as well. My wife has gone through several, but my son who uses a mucro-usb to lightning tip for his iPad has never needed me to buy him an expensive lightning cable . The point of failure is almost always going to be right where the cable meets the tip. If you can move that common failure point off your expensive adapter and on to your inexpensive usb cable it makes sense IMO.
I'm dying to know if the Magnector is tall enough to connect to a Z3C ensconced in a case. I haven't seen anyone definitively say whether it will or not. My Cruzerlite case and the phone itself should show up within the next couple of weeks at which point (I'm crossing my fingers) I'll find out everything works as I imagine it will.
A lot of people report that the Magnector adapter does not work with cases, and I can see why -- there is very little clearance between the charging surface and cable. Looking forward to hearing more about the Deff adapter.
I'm using a couple of cheapo ebay magnetic charging cables right now, which work fine and were cheap enough that they're virtually disposable so I don't care if they don't last long. I'm not expecting any adapter, however pricey, to be very stable laterally because the mag port was only really designed for the dock, which obviously holds the phone still while charging. AFAIK there is no official Sony magnetic charging cable, despite what ebay sellers want us to believe.
I got my deff and it is great. Enough clearance to fit with a case, strong magnet and produces more current than the cheap ones from China.
If you're looking for a good magnetic charger, pick up one of these adapters.
Sent from my D5803 using XDA Free mobile app
aaronchi24 said:
I got my deff and it is great. Enough clearance to fit with a case, strong magnet and produces more current than the cheap ones from China.
If you're looking for a good magnetic charger, pick up one of these adapters.
Click to expand...
Click to collapse
Sounds good, but boy are they expensive! Anyone know of a cheaper source than Amazon's sellers?
this looks like the charger i've been looking for, since none of the others have clearance for a case. thanks!
radiohead14 said:
this looks like the charger i've been looking for, since none of the others have clearance for a case. thanks!
Click to expand...
Click to collapse
All the cheapo Chinese ones I've tried have plenty of clearance for a case, and at $2 a pop I'm happy with them
pipspeak said:
All the cheapo Chinese ones I've tried have plenty of clearance for a case, and at $2 a pop I'm happy with them
Click to expand...
Click to collapse
can you link it?
drunkenmastera said:
can you link it?
Click to expand...
Click to collapse
Just search ebay for "sony magnetic cable" and a million options come up. In my (limited) experience they'll all fit more or less the same -- OK but by no means rock solid (I'm sire they're all made in the same Chinese factory). I did try modding one with a dremel tool to fit slightly better but now it doesn't work any more :cyclops: The best of my cheap bunch is the (slightly less cheap) Apple-style ones with a cylindrical head and in-line LED.
One thing to note... some (including my favorite) seem to have spring-loaded pins, so even though they stick out a bit from the charging head they will retract once in contact with the phone's charging pins.
I do want to try one of the Magnector-X cables, however. Looking at the design of the head it seems that it will be much more firmly attached to the phone because of the curved profile that matches the phone edge and gives a much greater area of contact. All the cheapies have a raised, flat charging surface so only the narrow magnet and pins are in contact with the phone. That means that however strong the magnet it's very easy for them to rock sideways and disconnect.
Dopes anyone have one of the newer Magnector -X cables (not he adapter)?
pipspeak said:
I do want to try one of the Magnector-X cables, however. Looking at the design of the head it seems that it will be much more firmly attached to the phone because of the curved profile that matches the phone edge and gives a much greater area of contact. All the cheapies have a raised, flat charging surface so only the narrow magnet and pins are in contact with the phone. That means that however strong the magnet it's very easy for them to rock sideways and disconnect.
Dopes anyone have one of the newer Magnector -X cables (not he adapter)?
Click to expand...
Click to collapse
I have both the cable and the adapter from Magnector, and the cable is way better in terms of staying on. I can pick up and use my phone with the cable without it disconnecting. It also works great while driving in my car mount. The adapter is good when just leaving it sit (charging overnight, for example).
The only drawback about the cable is that it's a bit shorter than I'd like, but that's easily solved with a USB extension cable. I've not tried any of the ebay ones, I wasn't too impressed from the comments of others in this forum.
Related
I bought 3 sets of micro-USB cables from monoprice, and I'm sad to say that they won't work with the Captivate. Due to the Captivate's recessed USB port, the cable can't be inserted all the way. The plastic around the end connector is too thick.
Donatron said:
I bought 3 sets of micro-USB cables from monoprice, and I'm sad to say that they won't work with the Captivate. Due to the Captivate's recessed USB port, the cable can't be inserted all the way. The plastic around the end connector is too thick.
Click to expand...
Click to collapse
Shave the plastic down?
I had to go to a work conference and left my charger and cable at the hotel =(. So I really need something today because my phone is on it's last leg. Does anyone have any idea where to find a cable/charger that will fit the captivate? And I mean locally by the way. Radio Shack, best buy, AT&T?
Just about any micro usb will work, but some don't seat all the way in so the cable could pop out if you move the phone. If you just lay it down to charge you will be OK.
Buy it, try it, if it doesn't work take it back. But like i said, I have not found one that doesn't work somewhat to at least get you a charge.
waffle418 said:
Shave the plastic down?
Click to expand...
Click to collapse
This.
Shave the bottom side at an angle. A box cutter, X-acto, or even sharp pocket knife will do the trick. Just mind your fingers.
Got mine in yesterday. Didn't fit as snug as first. Took it to the kitchen, one slice with a kitchen knife and it was perfect. Almost looks like it was specifically made for the phone since the angle was dead on
treylemkn said:
I had to go to a work conference and left my charger and cable at the hotel =(. So I really need something today because my phone is on it's last leg. Does anyone have any idea where to find a cable/charger that will fit the captivate? And I mean locally by the way. Radio Shack, best buy, AT&T?
Click to expand...
Click to collapse
radio shack, thats where i bought my phone from.
I bought 3 of these from Amazon and they work wonderfully. If you have Amazon Prime they ship free.
Well, I can't post links, but search Amazon for:
BlackBerry USB Cable Micro
They should be $1.99 a piece.
LiqudDeth said:
I bought 3 of these from Amazon and they work wonderfully. If you have Amazon Prime they ship free.
Well, I can't post links, but search Amazon for:
BlackBerry USB Cable Micro
They should be $1.99 a piece.
Click to expand...
Click to collapse
There are lots of options when you search for that.
Is it called "BlackBerry USB DataSync and Charging Cable with Micro USB for BlackBerry 8900, 9500, and 8220"?
Those look like they would fit and they are $2.15 each.
Croak said:
This.
Shave the bottom side at an angle. A box cutter, X-acto, or even sharp pocket knife will do the trick. Just mind your fingers.
Click to expand...
Click to collapse
Just did this. Worked like a charm. I used an X-acto knife.
I'm kinda too lazy to do it to the other 2 cables. I'll get to them eventually. Haha
Odd... the 2 micro USB cables I bought from Monoprice work just fine... No modification necessary...
They work, but they work better when you cut them down at an angle on one side. I got 4 from there and did it to all of them. Works like a charm, and $7 for 4 micro usb cables? Can't beat that with a stick.
rob989_69 said:
They work, but they work better when you cut them down at an angle on one side. I got 4 from there and did it to all of them. Works like a charm, and $7 for 4 micro usb cables? Can't beat that with a stick.
Click to expand...
Click to collapse
Damn withs hipping?
I have the Fascinate and had the same issue with these cables. Slicing just a little bit off does the trick and they fit nice and tight. You can see in the pic that I got a little over excited with the x-acto knife on one of them but its nothing a little electrical tape can't fix
As with the other posters, I picked up 4 for my captivate, really simple to shave em down once you get the hang of it, and they work for syncing too, can't get much better than that!
I don't like to point out people or say nasty things.. but you are a moron...
Did you happen to look at the phone to see that the micro usb port is inside the phone and not on the edge of the plastic?
Anyone with 1/10 of brain could figure out that you need to shave off some of the plastic.. due to Samsung's design... not because of monoprice cables.
I love monoprice and have ordered easily over 2,000 different types of cables from them and have never had an issue... to make a topic with a thumbs down is really dumb.
my only complaint about monoprice is their $7 portable dvd mount for the car... My kid ripped both of the arms off kicking and pulling it.
but seriously... if you can't figure out that you needed to shave the wire, please return your android phone and immediately go buy an iphone right now! This second! so you have your Iphone with Ical and you can be an Imoron!
rant over
Also...
change your topic... they cables due work
It's really easy to shave it down, which is what I did.
If the plastic is kinda hard then you can heat up an old knife and it'll slice through the plastic easier.
I even did this with the stock cable, and that fits a little better
Why the stock cable doesn't fit ideally I have no clue....
fatttire said:
It's really easy to shave it down, which is what I did.
If the plastic is kinda hard then you can heat up an old knife and it'll slice through the plastic easier.
I even did this with the stock cable, and that fits a little better
Why the stock cable doesn't fit ideally I have no clue....
Click to expand...
Click to collapse
I think the only way the stock cable won't fit perfectly is if you don't force the door open all the way through the click. It takes a surprising amount of force.
Sent from my SAMSUNG-SGH-I897 using XDA App
Check it out. I just ordered some.
http://cgi.ebay.com/Lot-10-Micro-US...ewItem&pt=PDA_Accessories&hash=item3a5cd179db
None of these 3rd party micro USB cable fits Captivate without physically mod them.
True, however they are very easily modded. I just cut mine at an angle with a box cutter. WOrked like a champ.
Yeah I don't mind cutting them. But I heard that the BB microUSB cables fit.
more importantly, what do you need 10 wires for?
Because if this is the new standard then friends will be comming over ask to charge there phone or I misplace cables. I swear in the last few years I have like like 20 MiniUSB cables. Or atleast it feels that way.
why dont they fit? a lil too big?
http://www.amazon.com/BlackBerry-Ca..._1_1?ie=UTF8&s=wireless&qid=1280986721&sr=8-1
$1.69 eligible for super saver shipping/2 day shipping with amazon prime, or $1.89 and free shipping with no minimum purchase (click on "26 used and new from $0.01")
Yes, 10 for $12 is cheaper per cable, but this is better if you only want 1 or 2.
SiL3nTKiLL said:
why dont they fit? a lil too big?
Click to expand...
Click to collapse
Yea, the plastic around the connector is a bit big to fit in the recessed hole on the captivate. Not a problem though, a boxcutter cuts the excess plastic away easily.
Monoprice cables are far superior to everything else in terms of value/quality. The wire does in fact work with the captivate, but it doesn't go all the way in.
A minute of course nail file work or a quick swipe of a dull blade to take off the bottom corner will repair that. Super easy to fix and nobody would ever notice.
I think I bought a few gold plated 10' cables with ferrites for around $1.70 ea.
http://www.monoprice.com/products/p...=10303&cs_id=1030307&p_id=5459&seq=1&format=2
Monoprice always delivers top notch quality at less than the absolute lowest price.
Monoprice = pure love.
Or if you wanna be really cheap, you can go with this one. Its as cheap as your ebay crap but no doubt higher quality: http://www.monoprice.com/products/p...=1030307&p_id=4867&seq=1&format=2#description
Aight well I got my cables. 1st they are legit Black Berry cables or atleast in BB bags. and they fit in the Captivate with no trimming.
YellowGTO said:
Aight well I got my cables. 1st they are legit Black Berry cables or atleast in BB bags. and they fit in the Captivate with no trimming.
Click to expand...
Click to collapse
I agree no trimming needed, I used my BB micro usb cables with no issues. The rubber around the connectors on those babies are really large too.
eatkabab said:
Monoprice always delivers top notch quality at less than the absolute lowest price.
Monoprice = pure love.
[/url]
Click to expand...
Click to collapse
never heard of this site before. thanks for the link. i've always been a newegg guy, guess i might have a new favorite tech supply site. good prices
Typically I get my cables from monoprice, but since this connector is slightly different I decided to get some actual Samsung ones off ebay. They were 2.99 with free shipping... you can find them by searching for "OEM DATA CABLE Samsung Captivate i897 Vibrant T959 new!"
droidal said:
never heard of this site before. thanks for the link. i've always been a newegg guy, guess i might have a new favorite tech supply site. good prices
Click to expand...
Click to collapse
Monoprice doesn't supply everything. Monoprice is absolutely EXCELLENT for WIRES first and foremost, then they produce a slew of other products you might find useful as well. Such as a Digital HD antenna (TV must have digi tuner to use this)...
Beautiful site/company run by absolute saints.
The absolute cheapest and highest quality to ever come outta China
The Samsung USB cable that comes with the phone has little clips on it and is "made" for the phone. It looks like the plastic surrounding the beginning of the male end is pulled back a bit.
I bought a cheap micro USB cable at school and it barely fits then I went to best buy and bought one made for Blackberry. The blackberry one works better. Nothing works better than the cable that came with the phone.
Where can I get the official Galaxy S USB cables at? I want to get two or three of them. (money is no object relative to these cables)
Thanks,
JOe K.
If money is no object - then you can always pick them up from Samsung's accessory store:
http://www.samsung.com/us/mobile/cell-phones-accessories/APCBU10BBEGSTA
This is what I bought - works perfectly.
http://www.cellularaccessory.com/eta0u20jbebstd.html
wow no creativivty, the samsung cable has the same connector dimension as any other micro usb 5 pin, but the plastic housing is thinner. just sand or scrape or cut the corner of the plastic connector housing that interferes with the phones housing, i buy my cables at the dollar store! any where else it is labled as something special which it is not and often packaged with a charger of some sort and cost 10-30 times more.
I bought a spare for my car (OEM) for $3 on ebay.
I got one from Amazon for $6 with free shipping, official Samsung cable.
Sent from my SAMSUNG-SGH-I897 using XDA App
I'm not a big fan of the OEM cable. It's just too damned stiff. I'm making the love to retractable cables. Amazon. One Amzer and one Ziplinq.
And wall and car chargers with 2 USB ports each, without attached cable. Basically dual outlets for every modern portable device. 1 amp each outlet. The setup works great for me.
But of course, those of us who are truly Captivated have also got the battery charger and one or three spares . . .
Dankenstein said:
I'm making the love to retractable cables.
Click to expand...
Click to collapse
That just sounds bad...
I just ordered 4 of these:
http://www.amazon.com/gp/product/B001QATRCA/ref=oss_product
$5.68 shipped and should be here Friday or Monday.
Search Monoprice for part # 5457
Currently on sale for 0.48
Just have to carefully cut off a little plastic from the back and you're good to go.
I suppose that there's at least some comfort in getting a stiff, ****ty cable for really cheap. But life's too damned short to skim that hard on the durable everyday stuff, imo.
I mean, look at the pic in that link. Like how sadly that supposed power and data link is from wallowing in a sea of petroleum & plastics technology so ancient that just might be shale.
No way. I'm totally Captivated, so my data cables will be frequent and intimate companions. Like my girl, I want 'em tiny and flexible, and I want 'em to fill me other joy.
And the mere thought of using a cable that looks more suited to calf ropin' or to stopping the advance of the Wermacht . . . as a daily accessory for the phone that has so enthralled me that even my girl is jealous of the time we spend together . . . renders the pulse audible in my temples and almost stills my heart beneath the crushing weight of despair.
Oh, no. Not me. Carpe diem and then s-t-r-e-t-c-h it to a nice three feet or four feet, if you prefer . . . and then retract it back to its wonderfully compact resting shape.
Heh. Tried to do that from my Cappy on full desktop version.
This is a why she is a so beautiful to me.
Agree with xeemz, I bought a bunch of 3' and 6' ones and trimmed the plastic back. Now I have one at work, on the nightstand, at the computer, in the car... All for less than $5.
What's up w the cheapness dudes You heard of that diamond-encrusted iPhone?
Well wouldnt you be stoked to get a solid 24K gold plated micro usb cable for your galaxy!
I would pay $$$$$ for that.
Well, I'm old and need to make sure that I don't break another hip when I get whipped with an Indiana Jones cable.
But I would spend $9 on a gold plated phone vs. a regular metal and plastic one. Especially if I could get a FOUR foot Platinum plated cable for just $13.
But then I also need the flash to get the ladies.
I use one of these in my car:
http://www.usbfirewire.com/Parts/rr-aumcb-xxg.html
The cable is a little thick and stiff (heh heh...that's what she said) but the angle keeps it from protruding up in the air which I find annoying when the phone is sitting in its cradle or stand.
Dani897 said:
wow no creativivty, the samsung cable has the same connector dimension as any other micro usb 5 pin, but the plastic housing is thinner. just sand or scrape or cut the corner of the plastic connector housing that interferes with the phones housing, i buy my cables at the dollar store! any where else it is labled as something special which it is not and often packaged with a charger of some sort and cost 10-30 times more.
Click to expand...
Click to collapse
I have done this on some cables, but it doesn't work on all. Some of them have metal just under the plastic and it is not possible to get the tip small enough.
Just more insight that all cables are different.
All cables are certainly not created equal.
But I do have to admit that the stock cable is pretty unbeatable for durability (no pun intended, all you Latin scholars). And as a bonus, if you throw it around someone's shoulders, they are compelled to tell the truth.
Most of the cables I got don't fit right. I got a blackberry flat microusb which was $15 (I'm aware that's a rip off) and then I got a $3 one from my school both really don't fit in the phone at all.
The Samsung one fits so much nicer but they are backordered. Can anyone let me know where they got their cables which fit "near perfectly" into the phone. So far I'm 0/2. I don't want to screw up the phones charging USB ports by putting in cables that don't fit (albeit microusb).
Just post links of ones that fit near perfect.
Thanks,
JOe K.
jiannichan said:
I just ordered 4 of these:
amazon.com/gp/product/B001QATRCA/ref=oss_product
$5.68 shipped and should be here Friday or Monday.
Click to expand...
Click to collapse
Are you Chad? haha
amazon.com/BlackBerry-Cable-Micro-1-0m-Black/product-reviews/B001QATRCA/ref=cm_cr_dp_synop?ie=UTF8&showViewpoints=0&sortBy=bySubmissionDateDescending#R1Y1YSUK1S2DXO
MaxRabbit said:
Are you Chad? haha
amazon.com/BlackBerry-Cable-Micro-1-0m-Black/product-reviews/B001QATRCA/ref=cm_cr_dp_synop?ie=UTF8&showViewpoints=0&sortBy=bySubmissionDateDescending#R1Y1YSUK1S2DXO
Click to expand...
Click to collapse
Lol, no. I haven't gotten mine in yet. Since there are enough positive reviews about it, I didn't really think about leaving one. Now that I think about it, I probably will as soon as it comes in just to let people know how it works with their Captivate. I only bought 2 for myself, one for a co-workers Evo and the other one for my brothers Blackerry.
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I like these mounts, the page just went up today. It's much better than the crap Verizon is pushing. Anyone else ever use these docks?
I can't tell from the pics but does the one that have the charger block the audio out?
Never mind, I can see the audio jack now in the pics.
i came on to post this...I just got an email from proclip confirming this. Ive used proclip in the past and they are of good quality
http://www.proclipusa.com/default.a...d=&parent_category=4&d_pcat=13451&d_cat=18854
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
bowsersoulstar said:
I'm guessing only the adjustable holder will fit our phones if we have cases on them?
Click to expand...
Click to collapse
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Roroco said:
Looks like it. I would like the active setup, but I will have a TPU case on it. I wonder if a heat gun can help me bend it out a bit.
Click to expand...
Click to collapse
I'm looking at the same problem here. I've been using a holder with the 2 amp charger for the past two years with my Incredible and absolutely love it. I've never been able to get an extended battery because of how tight it slides in, though. I'll email them and ask but I might have to just swap in the stock battery for rides I know I'll need the juice.
Pros of using this are great, though. Because it's 2 amp charger I would get ~25% in about 20 minutes of driving with my Incredible with fast charging enabled in the kernel. GPS and Bluetooth for Google Maps would slow the charge down but would still give me a full charge from 20% to full in an hour. With Cyanogen I would set my bluetooth to only turn on when connected to a wall charger so I'd slide this in and my buetooth would turn on and connect to my car automatically. Last but not least, your wires are all tucked away! Very clean look.
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
nomisunrider said:
Does the mount hold the audio cable so it doesn't move and it plugs into the phone?
Any issues with the diztronic TPU case? Would it prevent the microusb or audio plugs from inserting into the phone completely?
Click to expand...
Click to collapse
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Roroco said:
If you get the universal dock, the bottom of the phone is completely exposed so you won't have any issues. I got my wife one of these (universal) for her iPod a few years back and the build quality is top notch.
i wish I didn't have to also plug in the cables separately, but maybe I can jerryrig something up.
Click to expand...
Click to collapse
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
nomisunrider said:
Yah, that's I'm trying to avoid. Taking off my case every time I get in the car would be a big hassle.
Click to expand...
Click to collapse
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
Indeed the added battery won't make it work in 512324. Our adjustable holder listed with the Galaxy Nexus listing might work. Our custom holders are made for the device as it comes out of the box, and indeed any added thickness will make it not work in our custom holders.
Click to expand...
Click to collapse
So I guess not?
Roroco said:
If you don't want to remove the case, then you need to get the universal dock. I wish them made a version of the active dock that was slightly adjustable, but they don't.
Click to expand...
Click to collapse
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Mooem7 said:
My question is would the charging holder accommodate the extended battery given that it barely adds any thickness to the device. From the looks of the pictures, it looks like the device slides in and is held on to the sides only so it looks like shouldn't be a problem.
I contacted customer service and they said this:
So I guess not?
Click to expand...
Click to collapse
Most extended batteries tend to add a lot of bulk (more than cases sometimes). The person who emailed you back may not be aware that the GN's extended battery adds about 1-2 mm of bulk to the bottom half of the phone.
Since the holder is a slide-in type, I can't see this being 'millimeter-tight'. Don't take my word for it but I'm willing to bet that this will fit even with the extended battery on.
I guess we won't know for sure until someone gets the fitted holders and try it though. I'd try, but I've a case so the fitted ones do me no good for sure.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
80 bucks for that dock. Ouch. Good concept, but that is a bit rich.
I wish you could buy these at a store. I've already got the whole set for the Nexus One and I've been waiting for the GN mount. I just added to my cart and it's an extra $20 in shipping (to Toronto). So after duty at the border I'm looking easy at $60 just for that one piece of molded plastic. Yeah the mount is great, but that's seriously expensive.
I've used their cases for the last 2 years, nexus s and thunderbolt, and they are great. I still have my Nexus S holder and the picture of the one on their site for the GNex looks like the same style, if so it should work with the extended battery. The slide in case is tight on the sides but leaves a gap behind the phone, see attached pic. The phone slides into that groove and the groove itself is very thin so it doesn't appear it will interfere with the rear battery cover at all.
Proclips is a great solution. I've used it for my car for years. I used them in 3 different cars. Pricey however, it works very well. A+
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
nomisunrider said:
Which I don't want. I want one with the charger, that can accomodate a case.
They make such a thing for the iphone. My co-worker has one.
http://www.proclipusa.com/brodit-de...and-pass-through-connector--516165-18357.aspx
I emailed them asking if they have plans for such a device for the galaxy nexus.
Click to expand...
Click to collapse
Hi
For those in the UK... just ordered an active mount from http://www.mountonus.com/
£59.99... bit steep but I guess thats the price you pay for a nice phone-specific/car-specific mount!
nomisunrider said:
Got a negative response =(
Unfortunately not. We only have adjustable holder with charging for our Apple line. These have all the same connectors in exact the same location.
For other phones there are too many differences in charging location and thickness of cases.
Best Regards,
Customer Service
ProClip USA, Inc.
Click to expand...
Click to collapse
It was to be expected. They are not going to design a niche product for a phone until it sells consistently in the millions. That said... Creating a Micro USB small swing arm to make it universal should be too hard....
If I feel industrial, I might see what I can make on my own.
http://owllus.com/product/carpadg-with-air-vent-mount/
I have to say it looks tempting. All I really do in my car is the occasional GPS (when my dashboard one sucks) and stream music. I know it won't charge past what I'm using but it's tempting to get a 100% going and then hop in the car and keep it there. But I'm curious what you guys have to say about it. If it's compatible with the Nexus I don't know why it wouldn't work for the Maxx. It looks like it might fit physically.
(To clarify I have the Maxx)
I don't see why it wouldn't work on the charging side but fitment may be an issue the maxx is much wider then the iphone.
bigv5150 said:
I don't see why it wouldn't work on the charging side but fitment may be an issue the maxx is much wider then the iphone.
Click to expand...
Click to collapse
How big is the Nexus 4? About the same size? Usually those things have clips on the side that spread out and you move them in, but I have no idea if this one does. It looks kind of cool though.
There is the "smart fit2" that's available all over ebay. I'd assume it would work. You have to buy the LG WCP-300 separately and plug it into a USB charger(I'd assume a nice high current charger). A bunch of sellers are showing the width as being adjustable from 4.5" to 6", but that ain't right. The WCP-300 is just 2.8" in diameter, and the Smart Fit2 squeezes down to about that size or a little smaller. It uses a standard 17mm ball, so you should be able to use it on a variety of mounting solutions.
Zenelia said:
Hiii
You can also check out this one too..I ordered this from fommy and believe me the grip on the phone is very good and even does not make any movement to the phone even on the sharp turns...so you can check this one...its good
Universal Lighter Socket Mount with Power Dongle
Thanks !!!
Click to expand...
Click to collapse
I bought the one from griffin with a coupon it was 31 dollars shipped.
bigv5150 said:
I bought the one from griffin with a coupon it was 31 dollars shipped.
Click to expand...
Click to collapse
This same company makes a version for the Nexus 4 that I had looked into.