Q&A for [ROM][L900] Dirty Unicorns 4.4.4 {10/23/2014}
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][L900] Dirty Unicorns 4.4.4 {10/23/2014}. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
No Power off Charge
Unfortunately, I do not have enough posts to post in the main thread. Been a member lurking here for years though.
So, I was on Synergy ROM 4.1.2 for the longest. Then 2 weeks ago I flashed Community 1.1 which is 4.4.2. After flashing community I was on 4.4.2 but still on MC2 Bootloader. Power-off Charge didnt work. It was a known issue. I flashed the fix for it in the community rom thread and it still didnt work. So someone said I need to upgrade to NE2 Bootloader. So I played flashed RWilcos NE2 Stock tar via Odin, which gave me Ne2 stock and uploaded my bootloader to Ne2 (verified by info.apk). I then flashed to DU. I have to say, best rom out. thanks for your work. Everything works 100%....except I still cannnot power off charge. I just freezes at the empty battery picture.
addt'l infos:
-Synergy was 4.1.2 with Persius kernal and MC2 bootloader (power off charge works)
-Community ROM 1.1 was 4.4.2 with JLmancuso's "Stockish" kernal and the MC2 bootloader (Power off problem begins)
-JWilco's Stock NE2 Completely Stock NE2 (DOnt know about kernal?) Stock NE2 Bootloader (Still no power off charge)
Now I am on:
DU (20141023-1754) 8.1
Bootloader: L900VPUCNE2
Kernel: 3.0.64-DU-g3ccb411
Dalvik VM: 1.6.0
Buildnumber: du_l900-userdebug 4.4.4 KTU8$Q
Any help please? Thanks! last help I got was from JLMancuso since this started when I flashed COmmunity ROM. He said I would need a NE2 Bootloader. Thats when I flashed back to JWilcos stock Ne2 and now JLMancuso is no longer with XDA unfortunately and all his threads are locked down. I have read in his thread and this one, where he came in here talking about the power-off charge bug and basically said there is no fix (Posts 1372 and 1373), that everyone is having this issue who runs a 4.4 rom and a Stock kernel, but some people are not having this issue. Any insight into a fix? Can I go to a different Kernel (Stock?) to fix it?
This post: http://forum.xda-developers.com/showpost.php?p=55745845&postcount=8866 Seems to have the fix,but is completely Greek to me. I think JLMancuso turned that fix into a ODIN'able file, but only gave it to a couple people in PM's while testing it. (I think this was different from his Charging off flashable .zip in the communit rom thread OP).
Even if no fix, I will keep using your ROM, its the best out there for the n2, hands down. Thanks so much for your hard work!
Any help please? Thanks!
<edit>
It is in fact charging while powered off, however, since it freezes on the charging greyscale animation, I have to do a battery pull to get it to boot. I can live without the animation now that I know it is charging. I am just looking for a way to not have to do a battery pull to get my phone to boot.
</edit>
No sound from headphones
I love the rom, but noticed when i tried to play music on pandora or listen to iheart with my headphones the sounds turn off when i lock the screen. This does not happen when i don't have headphones plugged in. Any ideas how i can fix this?
I have something strange happening. I have been using DU for a couple releases and love it. I have already tried a fresh install with no luck. My notifications are currently stacking over top of the status bar making everything on the bar unreadable. Also clearing the notification doesn't remove the stacked one on the status bar. Any help would be greatly appreciated thanks.
Sent from my SPH-L900 using XDA Free mobile app
I have the same issue when charging while power off I also have to pull the battery.
Sent from my SPH-L900 using XDA Free mobile app
Any idea why I am not able to install Netflix?
power saving mode?
i can't find a power saving mode for this rom. my battery life is decreasing from the android os. i tried to set the cpu max freq at 1200 in the notification panel... but it won't save. it'll go back to 1600 mhz. any help here?
So for some reason I don't get 4g or LTE. Is there something I can do to fix this?
Version 8.1 Update Change Question
First of all, I would like to thank the developers and team for such a great ROM. Lots of options and I can customize anything. It is like having a new phone all over again. I updated from version 7.9 to 8.1 (10/23 version) from a clean wipe and fresh install. I noticed a few option changes and can't find a few of the older options. For example the status bar message notification count use to be dirty tweaks, General UI, and Mis. Tweaks above the breathing message notifications. I did find it now under status bar tweaks, signal, and then notification count. On the previous version there was a setting to change the color the battery icon (I'm using the dotted circle with percentage). When charging I could change the color of the rotating circle. I must be missing the setting maybe it did not install. Does anyone know if this setting is still available? I thought previously I had more battery tweaks, but maybe I'm missing them or they are somewhere else. Any help would be greatly appreciated. Thanks
ccrun1800 said:
I have something strange happening. I have been using DU for a couple releases and love it. I have already tried a fresh install with no luck. My notifications are currently stacking over top of the status bar making everything on the bar unreadable. Also clearing the notification doesn't remove the stacked one on the status bar. Any help would be greatly appreciated thanks.
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
I had the same thing happen. I switched to a darker wallpaper and you didn't notice it anymore
du 4.4.4 mobile network
My sprint note 2 will not communicate with networks. Mobile data or voice. WiFi works though
Network Data Fail
I Installed the latest version on my sprint note2 last night. The installation went flawlessly, however, I have no access to the cellular towers. It doesnt know my phone number, wont obtain service (including roaming). I have no idea what I am doing. Perhaps its because I'm coming from a Rom that supported the S Pen or maybe its because it was an older version of android. Not really sure, but your input would be greatly appreciated!
Rom works great from the features I can access/utilize!
Thanks!
flashed du8.2 on l900, no network and evdo.
flashed the rom from cm10.1 to du 8.2 for sprint note 2 l900.
loses network and evdo range.
says unkown network and data state. no service...
sandeepak.daultani said:
flashed the rom from cm10.1 to du 8.2 for sprint note 2 l900.
loses network and evdo range.
says unkown network and data state. no service...
Click to expand...
Click to collapse
Make sure you are using a current recovery version
Sent from my SPH-L900 using XDA Free mobile app
jlmancuso said:
Make sure you are using a current recovery version
Sent from my SPH-L900 using XDA Free mobile app
Click to expand...
Click to collapse
using philz recovery cwm based 6.0.4.5
all steps as usual followed..
how do i get voicemail to stop coming in text messages?
i get a weird text in stead of a voicemail notification how can i get regular notification like stock rom?
what devices does this work on?
i just got this working on my note 2 for sprint i love it and now my friends want to have it on their devices also. also maybe you can list what you have successfully loaded it on. thanks. only thing i would like to try to fix is how my voicemail is delivered i get a text message is there a way to get it to go to my phone like stock rom?
Are the links dead? I am unable to download them on any of my devices.
Has anyone been able to get screen cast to work with a Roku? When I enable it in the display settings it doesn't seem to scan. Any ideas?
Sent from my SPH-L900 using Tapatalk
Impossible to download
The L900 version of DU is no longer on the downloads site. Where can we go to download now?
Related
Q&A for 10.01.14 | 4.4.2 | LikeWise S5 4.2 | NE4
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
BUG!
I have problems with the ROM, when no stack, no single load cell is restarted. HEEEEEEEEELP!
yo tengo problemas con la ROM, cuando no tiene pila, no carga el celular solo se reinicia. AYUDAAAA!!
Sorry, but I honestly don't have any idea what you mean here. Those are terms not really used when dealing with rom issues.
But the simple solution is to flash stock, factory reset and start again.
Beyond that, we'd need a better description of the problems.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Queartion about flashing
So i am on cyanogenmod 11 4.4.4 right now. I noticed it says you will need a 4.3 modem and bootloader. What does that mean? Am I not able to flash this rom? Sorry for the dumb question, I am new to rooting and flashing roms.
That is referring to your base firmware version. When you flash firmware via Odin, it flashes multiple partitions to what ever build is being flashed. This includes the bootloaders, modem, and others. You can then flash roms on top of that, but the base firmware would remain unchanged. Roms only flash the system and boot (kernel) partitions (sometimes data too).
For the 4.4.2 TouchWiz roms to work, that base firmware MUST be at least a 4.3 build.
To check what you currently have, install and open Terminal Emulator from the store and enter this:
getprop ro.bootloader
It will tell you your current base firmware/bootloader version. If it's not a 4.3 or 4.4.2 build, you have to update before flashing the rom.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
It says I747UCDLK3, do I have to flash an update to the bootloader?
Weather on Lockscreen
Is there a way to get the weather on the lock screen of a At&t galaxy S3 4.4.2 KK Rom like the attached picture?
There is no "additional Information" selection under the main lock screen setting.
Likewise Galaxy S5 Rom for Galaxy S3
Can anyone confirm if this rom works well with SGH-i747M from Bell Mobile? Also, if I download this, will I still be able to recieve OTA updates? And if not, will Samsung Kies still detect it? And if so, would it install at all or what?
Does anyone have a guide with steps on how to flash this properly?
Any help at all would be appreciated, I'm still bit of a newbie at this... :/
You can only get ota if you are 100% full stock. No root, no mods, no custom anything.
You flash just like any other rom or mod. If you are not familiar with this, I highly recommend you don't do anything until you've read the sticky threads and searched the forums for remaining questions or concerns.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
[SOLVED] Weather on Lock Screen
Beesvee said:
Is there a way to get the weather on the lock screen of a At&t galaxy S3 4.4.2 KK Rom like the attached picture?
There is no "additional Information" selection under the main lock screen setting.
Click to expand...
Click to collapse
For those who wanted the weather on the lock screen like the attached picture: Note I am a total noob who just likes fiddling around. I do not know why or how this worked but.... I am running Enewman17 S5-EXperience Rom Found in the Likewise S5 thread.
1. renamed the SecSettings, SecSettings Porvider, and Keygard to .bak. in the priv-app using root explorer.
2. I used the SecSettings, SecSettings Provider, and Keygard from the S5 Sensation Rom and placed them into the priv-app and changed the premissions rw-r-r.
3. Reboot. Upon rebooting I got FC on settings but once the phone settled FC never happened again.
4. Go into the settings, lockscreen, then select additional settings, toggle on and select weather on lock screen.
5. Lock the screen to notice the affect.
6. I had to repeat steps 4 and 5 a few times for some reason but now Bam! its working. Hopefully the geniuses working on Likewise can get the UPSM to work and we will have a full blown S5 Rom. Awesome Job guys!
DocHoliday77 said:
You can only get ota if you are 100% full stock. No root, no mods, no custom anything.
You flash just like any other rom or mod. If you are not familiar with this, I highly recommend you don't do anything until you've read the sticky threads and searched the forums for remaining questions or concerns.
Sent from my SAMSUNG-SGH-I747 using Tapatalk
Click to expand...
Click to collapse
That's very unforunate :/
I have actually flashed my phone back to the official firmware because I was on cyanogenmod at one point and didn't like it and tried to figure out if there was a way to go back to the stock rom, I had people help me on a different forum site though.
All I really want is a touchwiz rom that doesn't lag every two seconds, Samsung has too much bloat on their phones D:
There are a number of 4.3 roms you can try, and theres Likewise, TMS3KK and S3Rx built from 4.4.2.
All are great roms and you can always remove a lot of the bloat that you dont like. Likewise does have a heavier memory footprint though. But thats understandable and it still hasnt caused me any problems.
I agree with you about cm, but ive hardly ever had a single issue running on Touchwiz.
And dont take my response as not wanting to help. Im always happy to help folks out, but on xda it goes a long way with everyone if you are willing to take the time to try to help yourself first. Thats why I suggest reading the stickies. It can be a lot, but theres a lot of great info there that can help you on many ways.
Sent from my SGH-T999 using Tapatalk
I'm thinking about downloading the xposed installer but I'm scared of the word soft brick lol I've soft bricked my phone once and it took days to get it back has anyone soft bricked their phone downloading the xposed installer?
Sent from my SAMSUNG-SGH-I747 using XDA Free mobile app
On the 10 24 build I'm getting settings fc when booting and changing clock color and changing ringtone I did clean flash and wiped everything any
Ideas
S Health Pedometer
Has anyone been able to make this pedometer for S Health actually work? I cannot get it to count steps. It's always at 0 no matter how far I walk. And yeah its not on pause. Any help would be appreciated.
No mms (net10)
Hey Developers!
I have Problems with the Rom (No MMS).. I configure the APN and Nothing..
Thanks from Puerto Rico..
Questions I would VERY much appreciate answers to
DocHoliday77 said:
There are a number of 4.3 roms you can try, and theres Likewise, TMS3KK and S3Rx built from 4.4.2.
All are great roms and you can always remove a lot of the bloat that you dont like. Likewise does have a heavier memory footprint though. But thats understandable and it still hasnt caused me any problems.
I agree with you about cm, but ive hardly ever had a single issue running on Touchwiz.
And dont take my response as not wanting to help. Im always happy to help folks out, but on xda it goes a long way with everyone if you are willing to take the time to try to help yourself first. Thats why I suggest reading the stickies. It can be a lot, but theres a lot of great info there that can help you on many ways.
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
A few more questions, what do you mean by "stickie"?
And I noticed you have a "light" version of the ROM, but there's two different ones, what's the difference between them?
Also, in the regular rom the google drive link doesn't work, and the other link you have has multiple download links inside it, is it just the top one?
What do you mean by "4.3 modem and bootloader?" And how can I check if I have these things? Will it work if my phone is already at stock 4.4.2?
Is this rom compatible with Samsung Kies? I am asking because I need it to restore all my data if I manage to flash this successfully
Last question, would you recommend this rom as a daily driver? Also, whenever you release a new version, do I download it like any other software update? Where I can do it in the phone itself without any hassle?
Hello. On the latest version 4.4 is there a way to add screen shot to the power menu? Also awesome job on 4.4!!
bigfoot.kom said:
Hello. On the latest version 4.4 is there a way to add screen shot to the power menu? Also awesome job on 4.4!!
Click to expand...
Click to collapse
I've added it with GravityBox [KK].
MMS Not working
S0T0MAY0R said:
Hey Developers!
I have Problems with the Rom (No MMS).. I configure the APN and Nothing..
Thanks from Puerto Rico..
Click to expand...
Click to collapse
Sometimes you have to use another msg app like Gosms pro. is the one I use and it works fine
Q&A for [ROM][OFFICIAL] CyanogenMod Nightly Builds for d2lte
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
I'm having the same problem as dewey1973 (http://forum.xda-developers.com/showthread.php?p=55932521#post55932521 - I don't have enough posts on my account to post there.), no LTE on M11. Except it's on RingPlus instead of Ting. I've tried flashing different apns-conf.xml files but they're no longer working in M11 while they were in M9 and M10.
Robotic Earthling said:
I'm having the same problem as dewey1973 (http://forum.xda-developers.com/showthread.php?p=55932521#post55932521 - I don't have enough posts on my account to post there.), no LTE on M11. Except it's on RingPlus instead of Ting. I've tried flashing different apns-conf.xml files but they're no longer working in M11 while they were in M9 and M10.
Click to expand...
Click to collapse
Have any of you tried taking the APN fix for boost mobile and just changing the APNs to what you need and flashing that?
If you're talking about this (can't post regular links yet, sorry)
Code:
androidforums.
com/boost-mobile-galaxy-s3-all-things-root/840501-mod-universal-boost-apn-fix-d2lte-builds-mod.html
then it looks like that worked! Thanks! I had tried a few other APN fixes that didn't work so I had been looking for another way. I'll send a PM to dewey1973 so he can post it in the main thread.
EDIT: It was working for a while but then stopped working. I'll test it more and update when I get a chance.
Well can anyone help me figure out how to fix the aspect ratio with the front facing camera in the latest few snapshots?? The default camera front facing is fine, but third party apps like snapchat distort.. For example, a perfect circle (a coin) will turn into an oval shape up and down. It's driving me crazy
Play Store has wrong carrier
I am running CM11 M12 and when I head to the play store it says that I am on Verizon instead of Sprint. Everything else works amazing except this. I can provide any information that is required. Thanks
knightsyde said:
I am running CM11 M12 and when I head to the play store it says that I am on Verizon instead of Sprint. Everything else works amazing except this. I can provide any information that is required. Thanks
Click to expand...
Click to collapse
This is a known issue. Shouldn't affect anything or prevent you from installing apps though.
It does interfere a little with setting up google voice, but can be handled by manually editing voicemail options
Battery Life M12
I just flashed to stock to get the modem update, then did a clean install of M12 + gapps + Ting APN's, and my battery life is just tanked. I have the phone plugged into USB currently, with Wifi on, bluetooth off, gps off, and I can't even break even on the charge; I'm at 11% and falling fast. I was on M9 (or M8? I can't remember) before this, and didn't have a problem like this. Is there any known issue with battery life in M12?
ADB Debug
I'm on the latest nightly, can everyone else enable ADB? I enable it and within the second it crashes. The catlog says:
Code:
got -1 reading
Communications error
Java.io.IOException: No such file or directory
Is this just me or a Nightly thing?
---------- Post added at 11:59 PM ---------- Previous post was at 11:15 PM ----------
bussemac said:
I just flashed to stock to get the modem update, then did a clean install of M12 + gapps + Ting APN's, and my battery life is just tanked. I have the phone plugged into USB currently, with Wifi on, bluetooth off, gps off, and I can't even break even on the charge; I'm at 11% and falling fast. I was on M9 (or M8? I can't remember) before this, and didn't have a problem like this. Is there any known issue with battery life in M12?
Click to expand...
Click to collapse
I had M12 for a while, I didn't have too much of a battery life problem, you can add the Performance Profile Tile to the Quick Settings Panel and change it from balanced to power save. I always recommend getting better battery stats, created by XDA Developer chamonix, it's not free but its excellent to see exactly what is draining your battery. Kernel Wakelock, Application Wakelock, or an Alarm or something. As always keep radios, modems and such upgraded.
No MMS or data when flashing the VMU APN fix on CM12.1
I flashed the APN fix and I don't have any data or MMS on CM12.1. Can anyone help me or post an APN fix I can use that will solve this problem for me?
Is anybody using this 12.1 ROM? Feedback? I am using the aicp ROM and it is awesome
Check out the Official 12.1 Builds for D2Spr!!
https://download.cyanogenmod.org/?device=d2spr
This is awesome!
So, I'm assuming flashing the CM12.1 would need to be a clean flash after a full wipe if coming from CM11, correct?
Sent from my CM12 ? HTC Desire 816 on Virgin Mobile USA
Videos
look at videos for recovery, root, and other things. They will explain every question you may possibly have.
Sprint S3 CM 12.1 nightly boot loop
I did a fresh install of cm-12.1-20150514-NIGHTLY-d2spr and Im stuck in boot loop. Tried older versions too and I get the same result. Can anyone help me, I'm running CWM 6.0.4.5
Please Help!!!
I have been searching the forums & Google for the past 2 days trying to find an answer to my question: Does the *stock* cm12.1 kernel (official nightlies) come with an alternative to MP-decision (hotplug) & thermald?! I'm desperate to know!! I've installed kernel adiutor and noticed a message stating that if my kernel has an alternative, to disable the option in the app... So I'm confused & haven't been able to find any info at all on the stock cm12.1 kernel, or what features it has, which would be very helpful & nice to know! Thanks in advance to anyone willing to help me out! Any info at all would be highly appreciated!!
Just incase it matters I'm using the d2spr official CM12.1 Nightlies, & I'm on the 5/24 build. Thanks!!!
Messaging force close
Hey I'm running cm 12.1-20151025 and I tried clean installing the snapshot and the 20151205 nightly and messaging would force close continuously. I tried Google messenger same problem. Does anyone have any ideas ?
Theblaide said:
Hey I'm running cm 12.1-20151025 and I tried clean installing the snapshot and the 20151205 nightly and messaging would force close continuously. I tried Google messenger same problem. Does anyone have any ideas ?
Click to expand...
Click to collapse
Did you wipe /system also? I skipped this and it wouldn't boot on the 12/05 build.
I'm also getting a no sim card notification, and not able to add APN's.
I need help ..Rom cm13 does not function on my phone I compound cm12.1 modem system ND8 what reason
Q&A for [ROM][4.4.4][OFFICIAL] LiquidSmooth v3.1 - n7100
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.4.4][OFFICIAL] LiquidSmooth v3.1 - n7100. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Is this consider a bug ?
I have flashed the Liquidsmooth v3.2 on my Samsung Galaxy Note 2 GT-N7100 and what i am facing now is when i switch off my phone..i plug in the usb cable to charge, then the screen will show the battery charging icon but it will be there forever, not like the other roms i flash it used to be off screen when charging. So may i ask is these a bug ?
dasian89 said:
I have flashed the Liquidsmooth v3.2 on my Samsung Galaxy Note 2 GT-N7100 and what i am facing now is when i switch off my phone..i plug in the usb cable to charge, then the screen will show the battery charging icon but it will be there forever, not like the other roms i flash it used to be off screen when charging. So may i ask is these a bug ?
Click to expand...
Click to collapse
That's a "problem" with your bootloader I believe. The battery icon just stays there and does nothing but your phone does charge in the background. Update your bootloader to MJ5 or later and that will stop happening. Again this is only your animation so it shouldn't bother you much :]
"The music is different here."
anyway to change the ui status bar icons? I'd like to have a 4g icon besides the h icon
Sent from my GT-N7105 using XDA Free mobile app
Hi Guys,
I'm just wondering if there is any way to get a swipe-able camera icon on the bottom right hand corner of the lockscreen?
Cheers.
System UI force Close
The rom is awsome. I'm using it on my note 2 n7100. Rom Gives more option to user. Im feeling like a SuperUser. But sometime, when i unlock the screen it shows "process.systemui.forceclose". And then the system UI restarts. i dont know why this is happening. Please Fix it. I like THis LIQUIDSMOOTH rom very much. As this is the stable version, this must not be happened.
thanks for the link. it really works!!!
Call quality
Hi,
My previous rom is cm11 snapshot m9. ROM was very smooth.but i had two problems.low volume(fixed with mod) and call quality issuewhich is persistent with liquid smooth rom also .some people may call it echo where person on other side hears distorted amplified sounds. But i switched to this rom. but unfortunately this rom also has that issue.i dont know what to do. i am getting many complaints about call quality.please resolve this issue.Thanks
Carrier name on lock screen
Hi,
First post here, and first and foremost I'd like to say a huge thanks to all the people that have provided so much valuable information on this forum and an even bigger "Thank you" to the developers of the LiquidSmooth ROM. It looks like a perfect fit for what I am looking for and I am hoping I will stick with it for quite some time.
I was hoping though someone can maybe help me figure this one little thing out. Summary "After flashing the ROM I see Telus on the lock screen as opposed to Koodo, any way to change it back?"
Details:
- I got a Note 2 from Koodo a few days ago, SGH-i317M, that came with 4.4.2
- Rooted using CF-Auto-Root (CF-Auto-Root-t0ltecan-t0ltevl-sghi317m.tar.md5)
- Installed Philz Touch (philz_touch_6.48.4-t0lteatt.tar.md5), everything fine so far (except for warranty as expected)
- Flashed Telus modem 4.1.1 (was not able to find Koodo 4.1.1 ROM), so I can carrier unlock, and after the unlock procedure flashed back to modem from 4.4.2 Koodo Stock.
- Installed LiquidSmooth from Official/3.1/Note_2_t0lte/
- Installed PA Gapps Nano modular package (pa_gapps-modular-nano-4.4.4-20141110-signed.zip)
Phone boots fine, and I am able to make / receive calls, wi-fi works, camera works, but my lock screen shows Telus as opposed to Koodo.
I tried flashing the modem.bin using Odin from the Koodo 4.4.2 stock rom again, but that didn't really change it back to Koodo as I hoped.
I have done a lot of reading during the past few days to learn how to do the things I did and surrounding risks / important bits, but I am still a newbie when it comes to Android, and have not seen or maybe just missed the answer to this question.
I am wondering then:
- where the source for this text comes from, and
- is there a way to get it back to Koodo.
Any help greatly appreciated !
Found a way to change it under Settings / Notifications / Notification Drawer / Custom carrier label. Would have never guessed I can find it there, but nevertheless it does what I needed.
My camera isn't working correctly
When i first boot the phone it works, no problems. After that it keeps giving me errors, can't acess the camera module. Am I missing something?
Thanks!
Camera can't connect after I flashed update v3.2 from v3.1, another issue with homescreen, It lost few of certain shortcuts once rebooting device, please advise.?! other than that, the rom is very nice!
Sometimes my phone hangs up and i have to force reboot my phone. This was a major problem when i was using 3.2 milestone version. I reflashed back to 3.1 and had the same problem (phone freezes) but that only occured once at the moment. Is it a launcher problem or its something else?
themes?
hello guys i have liquidsmooth at my s3 but i cant find themes if u can tell me where can i find themes and link me a lollipop theme
Restore S-pen apps
Hello.I have a question regarding the apps for the spen.Before flashing this rom,i did a backup of the stock one,and i would like to get the S pen apps restored on this rom.Copied the apk to /system/app,gave rw-r -r permissions,rebooted,no avail,spen app not showing in launcher.so my question is:how do i restore this apk?
am new to samsung devices cuz i been on xperia line for 4 years in these stuff some stuff seems different here as far as i know there is do need to unlock bootloader stuff to flash custom roms like this one so all i have to do is to root with kingroot and install twrp through twrp manger then flash this rom directly?or flash boot.img 1st through cmd then flash the rom in twrp cuz thats how was in all sony devices
Q&A for [ROM][5.0.1][OFFICIAL]Team UB ROM for T0LTE [15/12/2014]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][5.0.1][OFFICIAL]Team UB ROM for T0LTE [15/12/2014]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
flashing it.. um... hope it not be auto looping in bootloader, i am using CWM + philZ to flash it.
Im looking forward to trying this rom.
Im just doing the last backups - ill report back later
---------- Post added at 08:29 PM ---------- Previous post was at 07:43 PM ----------
It took a longer time than normal to install - like OP said. But it did flash, and it did boot (after a while)
However, there are no data connection, and there are no keyboard.
Any idea how to solve that?
EDIT:
I solved the problem with the keyboard.
Settings -> Language & input - > current keyboard. Slide the "Hardware" option to on.
Still no data connection
Data not working?
Data is not working on my T-Mobile note 2 after installing rom. I will get 3G for about 1 second and then it will disappear. It comes back every few seconds and then disappears again.
hello ub team ...
Team UB can you develop the same ROM for n7100 with all your tweaks and can you integrate touchwiz from s5 lollipop Poland release available on sammobile..see what you can do sir
jash2909 said:
Team UB can you develop the same ROM for n7100 with all your tweaks and can you integrate touchwiz from s5 lollipop Poland release available on sammobile..see what you can do sir
Click to expand...
Click to collapse
Team UB already support for n7100, you must only waiting it out. and tweaks and everything about touchwiz then.........nope, lol. don't ask. if you like touchwiz s5, you can make build for yourself
cm12 mobile data
hey guys i installed this rom on my n7105 last night and when i got to use mobile data the 3g icon just blinks one once then its gone it doesnt work.. any ideas?
So far ive concluded that i really like lollipop
However, this version is unfortunately too buggy for me.
There are no data connection - and i assume there is no solution to that, since OP havnt responded to it.
Using the "call button" in the text notification isnt working either.
The system profiles, does not trigger on connecting to WIFI networks.
Good job porting the rom - but it needs a bit of work yet imo
Everything works fine except the wifi reboot thing and the application not installed problem. But anyway i love using this rom so much, so thanks for your work
nathantttt said:
Everything works fine except the wifi reboot thing and the application not installed problem. But anyway i love using this rom so much, so thanks for your work
Click to expand...
Click to collapse
No problems with data?
Is it t0lte you have, or one of the phone from an US carrier? like at&t or something?
Happy to say its been about 15 hours since install and I haven't had any issues at all. Phone, data, SMS, cameras, updating apps, FB, xda, email (gmail, yahoo), etc are all working fine. No issues, FCs or RRs to report! Definitely has become my DD! Thanks to the devs who have took the time to keep our GN2s still a force to be reckoned with! :thumbup:
Sent from my Lollipop T889 Note 2
Hello all. Installed this ROM 5 days agoo. Runs Berry smooth and not battery or hotspot problems for me. The only thing is that 3g doesnnot connect anymore. It connected wel the first day But after that daay it didnt connect anymore. Anyone experience the same problem? Im using stock kernel
What are still not working on this Rom? I have n7105 in Sydney
Hi
thx for this rom that allows me to test lolipop on my T0lte... that's stable for me... The GPS doesn't work with Tom tom or Google maps...
I also have issues with rabbit battery app, when it try to turn on data despite the lolipop addon...
Thx for all
How About Recents Menu Slugginess?
I checked 17 December build of CM12 and Resurrection Remix. How about this ROM, and if you did, how did you manage to fix it?
Anyone Got trouble with forwarding and backwarding a video? Fwd en rew any video format results in a freeze But sound works good. I tried hw and sw decode
Has anyone had any trouble with Google play movies instantly crashing on open? All other video apps open fine. Tried reinstalling the app and clearing data. Currently running nightly from 26th.
Everything else is working perfectly including moto360 and chrome os trusted unlocking.
Sent from my GT-N7105 using XDA Free mobile app
headset volume problems
hello there
We tested this rom on notes 2 7015 t going well but the call volume sounds very slowly compared to stock.
It applies to cyanogen 11
testing this rom so lets see
Issue when powered down and charging
First off want to say am loving the tomorrow and a big thank you to everyone for all their work the only issue I have found is that when I power down the phone at night to charge it freezes up on the empty battery image. Not sure if this is cause of the rom or not.
Q&A for [ROM] [5.0] Samsung Galaxy S3 [d2tmo] [Nightly] LiquidSmooth Lollipop
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [5.0] Samsung Galaxy S3 [d2tmo] [Nightly] LiquidSmooth Lollipop. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
cameron_taylor said:
Camera fix ??? .... really wanna use snapchat and instagram ...
Click to expand...
Click to collapse
Stock and instagram cameras are not working, but snapchat's IS working for me!
From my experience with the rom, open camera is working really good.
Willbur415 said:
Stock and instagram cameras are not working, but snapchat's IS working for me!
From my experience with the rom, open camera is working really good.
Click to expand...
Click to collapse
You can also take a picture with open camera/nexus camera and then share it with instagram/snapchat. A few extra steps but it works
Sent from my SGH-T999 using XDA Free mobile app
Does this rom have a black material design theme?
lilipop roms
So I am running the cyanide L shift kernel version of lolipop or android 5 and I was wondering what the differences are between the two...
Is it the Launcher used? or Is Cyanide L and Liquid Smooth the firmware and the Launchers are a totally different thing? I'm not having any issues with my build right now... its running smooth like butter (only negative thing is my data wifi signal is really bad... I updated to NC1 but heard I may need to go to NC2 or NC4?? I dunno... anyways whats the differences? and I don't mean one is cyanide the other is Liquid smooth... I mean what are the actual differences in detail please...
I really really don't like the launcher (nova) used in the cyanide L build...
Mic issues
Mic isnt working with video chat apps
Anyone able to deposit a check using any banking app? Bank of America app doesn't work for me. I assume this is related to the camera issues.
Sent from my SGH-T999 using XDA Free mobile app
scheduler
Hi i want to thank you for the great work your doing. Im having issues with changing the i/o scheduler in the performance menu. No matter what i pick it stays as row as soon as i exit settings and apply on boot doesnt work either. I have tried clean flash reboot clear cache wipe dalvik and no luck. The only way i can make it stay is by another app.
Seriously, what is going on with VIPER?
No matter how many time I install the driver it's always "Not running, or Driver Status: Abnormal."
I downloaed the se Linux change, and it set it to permissive. Everytime the phone resets it goes back to enforcing. WHy won't it stay on permissive? I am using the default kernel with the LiquidSmooth
I can't get viper to work. At all. This is on a brand new fresh install, wiped away clean internal SDCard, starting completely anew.
This is frustrating the crap out of me.
Sent from my SGH-T999 using XDA Free mobile app
two files
[/COLOR]Soft keys on my s3 don't vibrate I can't seem to find the option to turn them on?
[/COLOR]
nafeasonto said:
Seriously, what is going on with VIPER?
No matter how many time I install the driver it's always "Not running, or Driver Status: Abnormal."
I downloaed the se Linux change, and it set it to permissive. Everytime the phone resets it goes back to enforcing. WHy won't it stay on permissive? I am using the default kernel with the LiquidSmooth
I can't get viper to work. At all. This is on a brand new fresh install, wiped away clean internal SDCard, starting completely anew.
This is frustrating the crap out of me.
Sent from my SGH-T999 using XDA Free mobile app
Click to expand...
Click to collapse
Have you tried installing a different kernel yet? I have shift kernel installed on my LS LP and VIPER is working smoothly on my phone.
Jesus226 said:
[/COLOR]
Have you tried installing a different kernel yet? I have shift kernel installed on my LS LP and VIPER is working smoothly on my phone.
Click to expand...
Click to collapse
do you have a link, the link in the post is not working.
Sent from my SGH-T999 using XDA Free mobile app
Camera
I flashed latest version "v4.0-2015-01-27", disabled and wiped data for stock Camera app, installed both Open Camera and Nexus Camera and neither are working. The window just goes black and crashes. Any idea on how to fix? People were saying it worked earlier in the thread so maybe it broke in a more recent update, would flashing an older version fix it?
This more updated that the 5.0.2 LP version?
Is this ROM more updated than the 5.0.2 LP ROM that you have fenixus??
Reply
Thanks
WHich do I choose?
Do I choose the Liquid Themes or Liquid Layers??
jestincheppad said:
Do I choose the Liquid Themes or Liquid Layers??
Click to expand...
Click to collapse
That's up to you, but I believe LS is going to discontinue the Themes builds...
GS³: SlimKat + leanKernel Edition™
ギミチョコ！！
no sound for the incomming calls
Hey. I really like this ROM, however I have a problem with calls. When someone calls me, the phone doesn't ring, just vibrates (sometimes it vibrates just once and that is it). THat is very sad because this ROM is so smooth and fast. Does this happen only on my phone? and also, I am on the slimkat now with cyanogenmod based recovery, so whenever I flash this rom or any other lollipop based ROM, I get the message from the recovery that I may lose the root access. I always chose the Fix option and everything runs just fine with the root access. But, I get this message everytime I go to recovery. Thank you for your great work. Oh, and just to clarify, the above mentioned problems happen on the newest build (3/6/2015) and the previous build (don't remember which one specifically).
INazar said:
Hey. I really like this ROM, however I have a problem with calls. When someone calls me, the phone doesn't ring, just vibrates (sometimes it vibrates just once and that is it). THat is very sad because this ROM is so smooth and fast. Does this happen only on my phone? and also, I am on the slimkat now with cyanogenmod based recovery, so whenever I flash this rom or any other lollipop based ROM, I get the message from the recovery that I may lose the root access. I always chose the Fix option and everything runs just fine with the root access. But, I get this message everytime I go to recovery. Thank you for your great work. Oh, and just to clarify, the above mentioned problems happen on the newest build (3/6/2015) and the previous build (don't remember which one specifically).
Click to expand...
Click to collapse
Get with fenixus on the main thread on the calling issue. You may have to provide logcats for him. As for the second problem, I believe SuperSU should be automatically flashed when the ROM is flashed, not sure of that's a recovery issue, but I know the auto flashing of SuperSU works on TWRP...
GS³: SlimKat + leanKernel Edition™
ギミチョコ！！
This suffers from the same thing every Slim rom does.
Anytime you set your default Ringtone, when you restart it defaults back to default. I guess because it is on the External SD card. Is there no way around this?
Another thing that is happening is everytime i restart the phone it has to update Google Play services.
I am in the middle of installing the ROM.
When I did the same ROM before, it took a few minutes to install, this time it's just stuck there it looks like.
Have I done something wrong? its been 15minutes or so. I will wait longer.