Q&A for [RECOVERY] Ouya CWM Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] Ouya CWM Recovery. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Can't boot into CWM Recovery
Hi,
I was thinking about installing CM11 and saw that I would need to install an updated CWM Recovery so I downloaded to the internal SD card and tried to boot CWM to flash the new version. When I tried to boot I just keep booting into normal android recovery which is badly over scanned on my TV. Having tried repeatedly to boot and pressing ALT + Print + I it never gets to CWM Recovery. So I tried rebooting into recovery from the ROM Manager app (which recognises I have CWM installed) but still standard recovery.
So I tried to flash again using one click recovery script and no ADB as I had previously switched on Wireless ADB arghhhh! Anyway I found an app to turn it off and it switches off wireless for that session only and I ran one click again. It went through the whole script and booted into standard over scanned Android recovery!
I am stuck now what to do next, any ideas? I would be happy to start from scratch but would doing a factory reset blow away CWM recovery or leave it still there?
The ouya is fully rooted with SU / Busybox / xposed and runs play store fine.
Any advice appreciated.
Paul.
Here is an image of the script I see when trying to re-run one click recovery. I assume it is not normal to see the unknown ID references?
I'm stuck unable to load CM11 without updating CWM Recovery so any help would be appreciated.
Fixed
Ah well after much searching I found people with similar issues as me and basically whilst I cannot pinpoint the exact issue I believe I had a permissions issue that was stopping CMW being written. I am not a programmer just a user and if I understood it correctly a previous update seems to have stopped me going into CWM Recovery. I had tried reloading etc but the errors I saw seem to be permission issues. After a lot of reading and seeing people overcoming this by running SU as a script and then issuing manual commands I decided to reload SU and this time when I ran the install CWM Recovery from Mod Collection for Ouya I noticed that straight away I got the message that it had been granted SU access and on reboot I am back in CWM Recovery. Have since upgraded to 6.0.4.8 which I need to go to CM11.
Paul.
thankks!
Related
Q&A for [RECOVERY] [OFFICIAL][f2fs] [2.8.0.1] TWRP
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] [OFFICIAL][f2fs] [2.8.0.1] TWRP. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Thanks for you
unable to install?
QA Bot said:
Q&A for [RECOVERY] [OFFICIAL][f2fs] [2.8.0.1] TWRP
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] [OFFICIAL][f2fs] [2.8.0.1] TWRP. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Click to expand...
Click to collapse
I am unable to install TWRP USING TWRP manager, it installs but once i boot to recovery find there same old cwm. Unable to install it through cwm or odin. plz guide?
sahoo56 said:
I am unable to install TWRP USING TWRP manager, it installs but once i boot to recovery find there same old cwm. Unable to install it through cwm or odin. plz guide?
Click to expand...
Click to collapse
Try flashing the zip. Before that, check if you have ticked Update CM recovery in Developer options.
Also you can try to fastboot your recovery image via adb
NoobInToto said:
Try flashing the zip. Before that, check if you have ticked Update CM recovery in Developer options.
Also you can try to fastboot your recovery image via adb
Click to expand...
Click to collapse
I am unable to locate "Update CM recovery" in developers options. Plz elaborate?
sahoo56 said:
I am unable to locate "Update CM recovery" in developers options. Plz elaborate?
Click to expand...
Click to collapse
Um,which rom are you on? On all cm based roms, i find this. I'm not sure if this really interferes, but i would prefer to turn it off incase i dont want changing recoveries.
Have you tried flashing the zip or flashing via fastboot?
deleted
thanks i'm using this version and now i can flash custom roms. the previous version of twrp that i have, it's not letting me flash...
your works are just great.
awiting for net update
Bishnu840 said:
your works are just great.
awiting for net update
Click to expand...
Click to collapse
If you would check the right section then you would have seen he has just released this week the update 2.8.5.0 build 10
plz sir add this options (if possible )
1. Reboot to odin download mood. (Ive found that on another twrp old version)
2. Partion sd card. Which is available in cwm.
3. Show the file name in backup & restore process running.
& Thanks for ur work . For a stable recovery
not stable
i used twrp 2.8.6.0 on gt i9082 installed rom is cm 12.1 from pawitp. twrp works only for 5 min. then it switches off and android starts. i tried turning off the screen timeout option and tried backing up. but the backup is interrupted after 5 min.
Q&A for [BOOTLOADER][SAFEBOOT] Ouya Bootmenu (mlq)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [BOOTLOADER][SAFEBOOT] Ouya Bootmenu (mlq). If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Problems installing Boot Menu on OUYA
Hi,
I followed the instructions to load CM11 on my OUYA, I flashed CWM 6.0.4.8, Boot Menu v2.0.4, CM11 Nightly, Gapps and the Key mapping zips all from CWM Recovery (latest version) and the OUYA rebooted into CM11, set up all ok, very happy so far.
However it struck me when I rebooted that I didn't get a new boot menu, so I tried flashing again and I don't see any errors it just comes back to recovery and when I reboot there is no boot menu! I did not sideload the files using ADB I flashed the zips from recovery.
Previously when running stock OUYA (rooted) I could not flash recovery and it would not update and I suspect that this was a permission issue as it only worked when I reloaded SU. Is it possible that permissions are blocking the installation of the boot menu and if so how can I fix this?
Please note I am a real Newby by name and just a user, I really have no programming experience but am happy to do whatever to resolve the problem. So any advice is appreciated. Having CM11 is a great improvement.
Cheers
Paul.
newbyp said:
Hi,
I followed the instructions to load CM11 on my OUYA, I flashed CWM 6.0.4.8, Boot Menu v2.0.4, CM11 Nightly, Gapps and the Key mapping zips all from CWM Recovery (latest version) and the OUYA rebooted into CM11, set up all ok, very happy so far.
However it struck me when I rebooted that I didn't get a new boot menu, so I tried flashing again and I don't see any errors it just comes back to recovery and when I reboot there is no boot menu! I did not sideload the files using ADB I flashed the zips from recovery.
Previously when running stock OUYA (rooted) I could not flash recovery and it would not update and I suspect that this was a permission issue as it only worked when I reloaded SU. Is it possible that permissions are blocking the installation of the boot menu and if so how can I fix this?
Please note I am a real Newby by name and just a user, I really have no programming experience but am happy to do whatever to resolve the problem. So any advice is appreciated. Having CM11 is a great improvement.
Cheers
Paul.
Click to expand...
Click to collapse
Hi All,
I tried to sideload and get this error can anyone advise how I can overcome this?
newbyp said:
Hi All,
I tried to sideload and get this error can anyone advise how I can overcome this?
Click to expand...
Click to collapse
Ok I re tried loading the zip from CWM and as before it looks to install without any issue, this time I found the log under advanced and it showed success. I then rebooted and again I don't see the bootmenu.
Do you think that it is possible that it is installed but for some reason not showing up on the TV? I have a suspision that it is loaded and booting after the time out as the screen goes blank for about 10 seconds before the Cynogenmod logo appears. how can I test if I can't see it, does the boot menu respond to the keyboard, if so is it two down arrows and and return to get to recovery?
Cheers
Paul.
Hi, I have installed this marvellous boot system with cm rom. Now I want to install the new stock rom update. I download the ota zip but I don't know how I must install it with this boot. Please could any one help me and tell me step by step? Can I flash the zip from cwm? When we install ota update it delete this boot system?
Thanks
Enviado desde mi SM-N9005 usando Tapatalk 2
Remember to reboot into the new recovery (6.0.48) BEFORE flashing the bootmenu!
I got that problem as well. It just means that you need to reboot the Ouya once again. You can't flash the new recovery module and the bootmenu zips in one go. Instead you have to flash 6.0.48 while in the older recovery (6.0.32), reboot and then you can flash the bootmenu zip without any error.
I just wanted to note that a couple of TVs I've tried don't lock to the hdmi signal until the boot menu is gone. This means you won't see the boot menu even though it is there and functioning correctly.
If you push the power button once or twice about 3 seconds after you power on the ouya, you will actually be selecting from the boot menu and that will cause the boot menu screen to persist (hopefully) until the TV or monitor locks.
Q&A for [RECOVERY][deb/flo] TWRP 2.8.1.0 touch recovery [2014-10-29]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY][deb/flo] TWRP 2.8.1.0 touch recovery [2014-10-29]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
GFXi0N said:
Does this work with current lollipop factory images?
Click to expand...
Click to collapse
yes, it work
Having an issue. not sure TWRP related or not.
When I go into Root Explorer or Root Browser, I've tried both, I have no TWRP folder.
My wife's tablet is okay. It shows TWRP.
As I wrote on the main thread, after flashing TWRP, it only boots to it if the tablet is connected to the computer...
Is it going to be built new release with encryption feature for Lollipop?
I too am having the issue of TWRP not seeing my internal storage. My N7 came with 5.0.1 and was updated with the OTA to 5.0.2. I then unlocked it in fastboot and flashed TWRP. I cannot see any files or mount any partitions in TWRP. I have tried the last 2.8.5.0 and 2.8.2.2 as suggested by other posters without success. Anyone have any suggestions as to what is going on? I have also tried running 'fastboot -w' and that didn't help either.
fragon69 said:
I too am having the issue of TWRP not seeing my internal storage. My N7 came with 5.0.1 and was updated with the OTA to 5.0.2. I then unlocked it in fastboot and flashed TWRP. I cannot see any files or mount any partitions in TWRP. I have tried the last 2.8.5.0 and 2.8.2.2 as suggested by other posters without success. Anyone have any suggestions as to what is going on? I have also tried running 'fastboot -w' and that didn't help either.
Click to expand...
Click to collapse
I am having the same issues with mine. Are you seeing this, this is my post....
http://forum.xda-developers.com/nexus-7-2013/nexus-7-2013-qa/mount-recovery-t3064562
Is it possible to flash bootloader.img taking from a stock image(5.1.0) using twrp as i don't have a PC to use to upgrade my bootloader from 04.04 to 04.05 its just coz I guess I need to upgrade to flash 5.1 roms
Sent from my Nexus 7 using XDA Free mobile app
masterchiefb117 said:
I am having the same issues with mine. Are you seeing this, this is my post....
http://forum.xda-developers.com/nexus-7-2013/nexus-7-2013-qa/mount-recovery-t3064562
Click to expand...
Click to collapse
You mean my post. These are the errors I get, sorry for bad quality http://m.imgur.cm/wUNMvQc,FJLOXyd,8cis4qN,rms9SGF
2.8.7.0 < 10 mo
Hi maximusmullivan,
Can you please tell us where you dl that version which is < 10M, because on the official website dl.twrp.me/deb/, the only version I see is 10.9M?
I tried installing 2.8.6.0 instead, but my Nexus 7 wouldn't start. I believe it is not compatible with Lollipop 5.1.1 (but that's only a guess because I'm no expert).
Thanks,
Ben
On Android 6.0 Marshmallow, twrp v2.8.7.0:
Backup was successful, but trying to restore "system" results in error 255.
Vadzhik said:
On Android 6.0 Marshmallow, twrp v2.8.7.0:
Backup was successful, but trying to restore "system" results in error 255.
Click to expand...
Click to collapse
TWRP likely needs an update to handle M. Be patient. The TWRP team will get around to it.
Q&A for 9/6 Mandatory Update Official Clockworkmod Touch Recovery 5.8.4.0
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for 9/6 Mandatory Update Official Clockworkmod Touch Recovery 5.8.4.0. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
help
broncogr said:
Hey guys.
Koush has been hard at work with his new recovery for The One-x.
A lot of his testing is done in our own IRC Channel #HTC-one-X on Freenode
Link to the latest Official recovery:
http://download.clockworkmod.com/recoveries/recovery-clockwork-touch-5.8.4.0-endeavoru.img
MD5: 147B081A8FD9216FA62244031E44DF88
You need to flash in fastboot by using the command fastboot flash recovery nameofrecovery.img
Charging Issues Fixed !!!
ALL USB related issues fixed !!!
Make sure you are on 5.8.4.0 or later (Check from recovery!!)
All stock recovery versions can be found here:
Stock HTC Recovery Use right mouse click > save as! otherwise it will just open in your browser
Thanks to ARHD Team for hosting.
Known Issues:
Led light might be off in recovery but device charges
Cant flash Recovery from OS
Cant flash boot.img from recovery
Enjoy
Thanks To:
Koush for the recovery.
RichardTrip for patching the kernel to allow usb in recovery.
Dees_Troy for the Mount USB Storage toggle fix.
Toastcfh for the charging fix and overall involvement in fixing all issues
Click to expand...
Click to collapse
i HAVE A HTC ONE X and it is stuck in recovery mode because i am unable to flash it due to the battery suddenly died when it was on 84% when i was install the ROM and now i cant charge my phone up enough to be able to flash it. I have tried the .bat way and this only charges my battery up to 2300mv to 2900mv and when ever it goes over that this bat files brings it do any suggestions would help
Q&A for [N5120][LTE] UNOFFICIAL CYANOGENMOD-5.1.1
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [N5120][LTE] UNOFFICIAL CYANOGENMOD-5.1.1. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
rgib said:
Uploaded New Build.
I need testers, thanks.
Click to expand...
Click to collapse
Ok, will make a try. I am now on cm-11-20141008-SNAPSHOT-M11
with CWM-based Recovery v6.0.4.7
Its my working device so I need to make shure ability to go back
to the state where it is now, including data, system etc.
So if you can tell me in short steps what to save with recovery and how
to reach there again I will help you testing with my device which is
truly LTE 5120 Europe Version.
baerenbisch said:
Ok, will make a try. I am now on cm-11-20141008-SNAPSHOT-M11
with CWM-based Recovery v6.0.4.7
Its my working device so I need to make shure ability to go back
to the state where it is now, including data, system etc.
So if you can tell me in short steps what to save with recovery and how
to reach there again I will help you testing with my device which is
truly LTE 5120 Europe Version.
Click to expand...
Click to collapse
* you should flash my updated TWRP recovery using Odin
* make a full backup
* then install rom-gapps-supersu
* if you have problem : reboot to recovery and restore your previous backup
rgib said:
* you should flash my updated TWRP recovery using Odin
Click to expand...
Click to collapse
There
http://teamw.in/devices/samsunggalaxynote80.html
is no version for N-5120...
Can I use my existing "CWM-based Recovery v6.0.4.7" instead?
baerenbisch said:
There
http://teamw.in/devices/samsunggalaxynote80.html
is no version for N-5120...
Can I use my existing "CWM-based Recovery v6.0.4.7" instead?
Click to expand...
Click to collapse
Yes
Hi there.
I have this device and willing to participate in the test of CM12 builds.
I own the n5120 and am interested in helping. But I need a little help first...
I have root but the version is too low. I need a recovery archive that will work with Android 4.4 and above. "CWM-based Recovery v6.0.4.7" sure would help me!
Can someone assist?
I've done full wipe: /system, /data, /cache, /data/media (internal memory). Then I've installed ROM zip (nothing else, no gapps or supersu). Archive was installed too fast IMO, faster than just copying zip file from sdcard to internal memory. Installation script reported status code '0.200000'. After reboot I've got 'infinite' boot animation (waited for 10 minutes, animation didn't stop and nothing else happened). Device became moderately warm.
Understood. It's not easy to work on a device I don't even own.
Gonna work on next release.
Thanks
Installation aborted
Tried to install via CWM-based Recovery v6.0.4.7.
Result :
Finding update package...
Opening update package...
E:Can't open /external_sd/.../cm-12.1....zip
(bad)
Installation aborted.
Do you have checksum for the zip-file?
lg,
baerenbisch
rgib said:
Understood. It's not easy to work on a device I don't even own.
Gonna work on next release.
Thanks
Click to expand...
Click to collapse
Big thanks to you that you are trying to do it, because I had no hope that my n5120 will get update.
I had infinite boot animation problem on Galaxy Note 2 (n7100). Somehow I've managed to start adb daemon during boot process, so I've got shell and logcat and solved the problem. Unfortunately, this was long ago and I cannot reproduce same thing on n5120. Maybe, if you guide me, I could start adb again during boot and get some logs for you?
---
---
rgib said:
New Build 13-May-2015
Click to expand...
Click to collapse
Still infinite boot.
---
rgib said:
After a full wipe ?
How long did you wait? It takes 10 minutes for the first boot.
Click to expand...
Click to collapse
Yes, full wipe. I waited 20 minutes or so.
---
hangs
Tested with TEST3 and hangs when booting using as the CWM recovery
Clean flashed test3 zip on my n5120, bootloop. tried SferaDev's rom, also the same.
Full wipe (/system, /cache, /data, /data/media/0, /tombstones). TEST#3 still stuck in boot animation. Waited for 20-25 minutes.
TEST #03 - Bootloop after fullwipe.
5120 user