Related
hi,
any help is hugely appreciated.
I wiped my phone in recovery with the option to wipe for new custom rom, this worked fine. when i went to install custom rom it failed and then turned itself off. now the phone just gets stuck at the Sony logo. the only way i can turn it off is via the red button in the sim slot.
I am unable to connect to the computer at all, no fastboot. I'm also unable to boot into recovery to restore.
Please help. Hope i haven't ****ed it up beyond fixing
Thanks
Flash a stock ftf with flashtool (in flashmode). You should definitely get into flashmode and fastboot, otherwise there is a problem with your computer.
Funny, I didn't even know there was a red button Holding Volume Up + Power for a few seconds always worked for me, no matter in which state the phone was.
Hi all,
I've exactely the same problem !!!
My phone stuck to Sony logo, and not reconyze on my 3 PC.... before that, usb connexion work fine on all PC, but now.... nothing
I've just POWER + and VOL+ (its power off the phone), i've no led color light
I've try flashboot, but not detect my phone
i've try to install :
flashtool-0.9.16.1-windows (not detected)
Flashtool-drivers-1.5-20140318 (my computer doesnt not see my phone)
Xperia_Z1_Compact_driver (my computer doesnt not see my phone too)
I can't go into Flashmode...
When i power off my Z1c, and i plug usb + (vol+) nothing appear...stuck Sony logo...
I'm lost... I need your help XDA members ! just U can help me
PS : the red button is in the SIM slot, but i think is same POWER + (VOL+).... its power off the phone
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Iruwen said:
Because you're doing it wrong. Vol+ enters fastboot mode, you have to press Vol- to enter flashmode. Then use Flashtool to restore the firmware.
Click to expand...
Click to collapse
THX for your response !
Sorry it's a mistake....
I've try both (vol+ and USB) and (vol- and USB).... but no sound (device not detected), in device manager nothing appear too.
I've make a fresh install of windows 7 x64 on another PC.
I finaly working to boot (2-3 times) with Vol- + USB cable, but stay in sony logo and Flashtool whait for device...
Please i need u're help beacause i'm really lost (usualy i flash many phone S4, Mediatek, phones, etc...) but now i dont find solution
My problem come from the original cable
All this because of the USB cable does not work ... CRAZY !
This USB cable is new and original sony... just 2 Weeks
I solved my problem with new one
That's unfortunate, good you found the issue.
i got my acro s hard bricked
I used twrp for making a backup for the the stock firmware.
and then i installed the 5.0.1 the lollipop custom firmware
the link :http://forum.xda-developers.com/showthread.php?t=2799765
, but it was not rooted but somehow the recovery was working good .. i decided to restore the stock using the backup version which i made in the beginning coz the ROM was sucks. after finishing the loading it asked for restart and after that i got a blank screen and the following
-no response for charging
-no LED lights at all
-non of any combinations working (volume+ and power on , hard reset or volume+up+power on)
-access to fastboot or flashtool is denied
-no power on no vibrations
but after a day of charging an Orange LED appears but i waited for two more days till the LED disappeared
and tried the flashtool but all i got is "device connected but with debugging off"
i think the problem was using recovery with unrooted device but can't find a solution for that
any suggestions ??!!
Notes:
am too calm
am not panic ..
am not in hurry too
and it's not a big deal
i just want the device back in order to get my stuff from it that's why going to Sony service center is not an option coz they format the whole device
Similar here on st26i
On 4.4 Paranoidandroid I've got after a five days of use in one second a lot of force closes. From every app from the system. It was impossible to stop it, or make normal reboot, so I've hold Power + VolUp and waited till three vibrations. Then turn on the phone, normal vibration and SONY logo.
After that black screen. First with some backlight, after minutes phone backlight turn off.
Now:
- No response for Power button
- No response for Power+VolUp combination
- No charging LED
- System find only SEMC Flash Device
- Flashtool says Device Connected with USB Debugging off
- Combination Power+VolUp make connected device to disconnect and connect again as SEMC Flash Device
- Cant acces fastboot, dwonload mode.
smogf said:
Similar here on st26i
On 4.4 Paranoidandroid I've got after a five days of use in one second a lot of force closes. From every app from the system. It was impossible to stop it, or make normal reboot, so I've hold Power + VolUp and waited till three vibrations. Then turn on the phone, normal vibration and SONY logo.
After that black screen. First with some backlight, after minutes phone backlight turn off.
Now:
- No response for Power button
- No response for Power+VolUp combination
- No charging LED
- System find only SEMC Flash Device
- Flashtool says Device Connected with USB Debugging off
- Combination Power+VolUp make connected device to disconnect and connect again as SEMC Flash Device
- Cant acces fastboot, dwonload mode.
Click to expand...
Click to collapse
it seems like we stuck here
Yup.
Is there any windows/linux software for SONY devices like KDZ for LG phones? Which have an emergency flash option and, etc.???
/EDIT
So... I have read a little and I think (wchich I supposed before witout reading) boot is "dead".
I think it will be possibly to flash new boot with s1boot, but. I cannot find service manual for lt26i. Can anyone have it? Or can say where is the Test Point in this device?
makaom said:
i got my acro s hard bricked
I used twrp for making a backup for the the stock firmware.
and then i installed the 5.0.1 the lollipop custom firmware
the link :http://forum.xda-developers.com/showthread.php?t=2799765
, but it was not rooted but somehow the recovery was working good .. i decided to restore the stock using the backup version which i made in the beginning coz the ROM was sucks. after finishing the loading it asked for restart and after that i got a blank screen and the following
-no response for charging
-no LED lights at all
-non of any combinations working (volume+ and power on , hard reset or volume+up+power on)
-access to fastboot or flashtool is denied
-no power on no vibrations
but after a day of charging an Orange LED appears but i waited for two more days till the LED disappeared
and tried the flashtool but all i got is "device connected but with debugging off"
i think the problem was using recovery with unrooted device but can't find a solution for that
any suggestions ??!!
Notes:
am too calm
am not panic ..
am not in hurry too
and it's not a big deal
i just want the device back in order to get my stuff from it that's why going to Sony service center is not an option coz they format the whole device
Click to expand...
Click to collapse
Same situation, really need help from someone because its my only android phone right now.
iv root my phone with locked boot loader & install timwin recovery for locked boot loader , its very good working then i decide try this CARBON-KK-UNOFFICIAL-20150221-2137-tianchi , copy 2 sd card & flash it whit tim win recovery all down but when i reboot it no responds
try to unlock bootloader with last version flash tools Version 0.9.18.5 but not entering flash mode by hold down vol botton just blink one time red & imiditly green light & agine red then turn led off
warning flash tool : Device connected with USB debugging off
04/037/2015 18:37:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
fastboot mode is work when hold down vol up & plug usb cable solid blue led turn on . device attached & respons when unlock bootloader with given number
FAILED (remote: Command did not succeed)
finished. total time: 0.093s
second time try
FAILED (remote: Device is already rooted)
finished. total time: 0.004s
try s1 tool with testpoint
resul:
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
PROCESSING ...
SERIAL NUMBER : D7E50A04
HARDWARE ID 04000100E1509100 NOT SUPPORTED
HARDWARE ID : 04000100E1509100
NOT SUPPORTED HASH :B77943D5B24F7012CB12EB2FF857C69EAA6518C0E58957AA70C0B0590E1F3BCA
Elapsed:21 secs.
pleas help un bricked my d5322
tanx
Do you have working a fastboot mode?
modesazhi said:
iv root my phone with locked boot loader & install timwin recovery for locked boot loader , its very good working then i decide try this CARBON-KK-UNOFFICIAL-20150221-2137-tianchi , copy 2 sd card & flash it whit tim win recovery all down but when i reboot it no responds
try to unlock bootloader with last version flash tools Version 0.9.18.5 but not entering flash mode by hold down vol botton just blink one time red & imiditly green light & agine red then turn led off
warning flash tool : Device connected with USB debugging off
04/037/2015 18:37:43 - INFO - For 2011 devices line, be sure you are not in MTP mode
fastboot mode is work when hold down vol up & plug usb cable solid blue led turn on . device attached & respons when unlock bootloader with given number
FAILED (remote: Command did not succeed)
finished. total time: 0.093s
second time try
FAILED (remote: Device is already rooted)
finished. total time: 0.004s
try s1 tool with testpoint
resul:
DETACH USB CABLE FROM PHONE
REMOVE BATTERY FROM PHONE
ATTACH TESTPOINT
PRESS "READY", THEN ATTACH USB CABLE TO PHONE
will use Sahara protocol ...
REMOVE TESTPOINT NOW, THEN PRESS "READY"
PROCESSING ...
SERIAL NUMBER : D7E50A04
HARDWARE ID 04000100E1509100 NOT SUPPORTED
HARDWARE ID : 04000100E1509100
NOT SUPPORTED HASH :B77943D5B24F7012CB12EB2FF857C69EAA6518C0E58957AA70C0B0590E1F3BCA
Elapsed:21 secs.
pleas help un bricked my d5322
tanx
Click to expand...
Click to collapse
Dude! If light is blink.. It's not a hard brick, just a soft brick don't worry everything thing is okay. You flashed a wrong kernel/locked bootloader.
Follow these setups
1.Download latest flash tool.
2.Install and go eg C:/flashtool/drivers (install t2 drivers) /windows 8 has some problems_google it
3. Open SIM panel, you will find a purple button press once with pan tip/needle
4. Put your phone in charging keep 1_2 hours
5. Connect in fastboot, now try to unlock phone with Sony Official bootloader unlocking method.(Google it)
Best of luck
No charging just blink slowly red led continusly
hard brick of xperia t2 ultra d5322 device
I have rooted my sony xperia t2 ultra and installed twrp recovery on it and it worked fine..but when i try to flash a custom rom,it shows a successful message and got bricked afterwards..was on low battery that time..showing red blink on led but now thre is no vibration as well as there is no led blink..please help me to fix it..please..asap..
prabhata moharana said:
I have rooted my sony xperia t2 ultra and installed twrp recovery on it and it worked fine..but when i try to flash a custom rom,it shows a successful message and got bricked afterwards..was on low battery that time..showing red blink on led but now thre is no vibration as well as there is no led blink..please help me to fix it..please..asap..
Click to expand...
Click to collapse
It happened to me few hours ago. I flashed a wrong kernel, then got no response/screen/led. take your time and hold power and vol + buttons 'til you feel the phone vibrate 4 times (1+3). As it happens you're sure it's turned off. So, let it charge for one or two hours, then flash a previously working kernel through flashtools fastboot mode.
This worked for me and hope it helps you too.
Best regards.
Hello,
I think I bricked my phone
I wanted to upgrade from 4.4.2 to Lollipop http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
And before that I did a factory reset and format data (I got some issues on my phone and wanted to get rid of them).
Now I can not enter TWRP, I can not enter any thing. At the time beeing, after many restarts my red button is broken, I switch it off by "Power/Vol+". When I connect USB or push Power it starts and showing "SONY"-Logo, and that's it.
I can not enter flash-mode by swith off, hold Vol- and connect USB :crying:
What can I do to revive my Z1c?
Thanks for advices
BerWatch!
BerWatch said:
Hello,
I think I bricked my phone
I wanted to upgrade from 4.4.2 to Lollipop http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
And before that I did a factory reset and format data (I got some issues on my phone and wanted to get rid of them).
Now I can not enter TWRP, I can not enter any thing. At the time beeing, after many restarts my red button is broken, I switch it off by "Power/Vol+". When I connect USB or push Power it starts and showing "SONY"-Logo, and that's it.
I can not enter flash-mode by swith off, hold Vol- and connect USB :crying:
What can I do to revive my Z1c?
Thanks for advices
BerWatch!
Click to expand...
Click to collapse
Do you have adb / fastboot on your computer?
levone1 said:
Do you have adb / fastboot on your computer?
Click to expand...
Click to collapse
Yes, I have, but can not enter my phone/don't know how to enter.
I tried switch off (by Power and Vol+), holding Vol- (the same with Vol+) and plug in USB - it starts by showing red light for 2 sec than "SONY", and than stps - no vibration, no light, only steady "SONY"
cmd shows: D:\Programme\Android-Tools\ADB>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot recovery
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot bootloader
error: device not found
Phhu, hopefully I do something wrong?!
Install these:
http://developer.sonymobile.com/downloads/drivers/xperia-z1-compact-driver/
and try again
BerWatch said:
Yes, I have, but can not enter my phone/don't know how to enter.
I tried switch off (by Power and Vol+), holding Vol- (the same with Vol+) and plug in USB - it starts by showing red light for 2 sec than "SONY", and than stps - no vibration, no light, only steady "SONY"
cmd shows: D:\Programme\Android-Tools\ADB>adb reboot recovery
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot recovery
error: device not found
D:\Programme\Android-Tools\ADB>adb reboot bootloader
error: device not found
Phhu, hopefully I do something wrong?!
Click to expand...
Click to collapse
Power off by holding power and volume up, just wait until it turns off. When it's totally shut off, just hold volume up while plugging in cable and don't let go of volume until you see blue led. Then you're in fastboot mode. If you have drivers installed, it's very easy to get into recovery from there. Report back.
If everything fails...
Install Flashtool on your PC, install the necessary drivers (flashtool helps you with that), download the current firmware in .ftf format and apply it with Flashtool to your phone.
No worries, we all were at your point sometime but you can always recover
Thanks for your hints, folks!
I'll try them tomorrow and give feedback than.
Happened to me once.. Accidentally wiped my data..
Only thing I managed to do is reinstall kk via flashtool
Xperia Z1 Compact .386 rooted
...nothing works.
I have almost everything installed: adb.exe (800kb from 25.07.2013), fastboot.exe (157kb from 25.07.2013), Flashtool (Version 0.9.14.0 built on 12-02-2014 22:45:00), Xperia Companion (Vers. 1.1.24.0), Z1 Compact drivers (device manager says: Sony sa0109 ADB Interface Driver Vers. 2.0.10.30018 from 13.05.2013).
Nothing can connect my Win10-PC via USB3.0 to my phone, it always starts (when I connect it to USB by holding wether Vol+ or Vol-) with red (...pink?) light for about 4sec, followed by showing "SONY" - end of anything.
I'm desperate :crying:
Do you get the green led light when connected in flash mode (vol down when connecting)?
Xperia Z1 Compact LP .386 rooted
No, only red light, than "SONY" without any vibration...
May it be, that usb-debugging was off, whenn I did format data?
BerWatch said:
No, only red light, than "SONY" without any vibration...
May it be, that usb-debugging was off, whenn I did format data?
Click to expand...
Click to collapse
I don't think it's related..
Maybe you don't have the right drivers on pc?
Xperia Z1 Compact LP .386 rooted
The fastboot or flashmode mode should always work - regardless of what you did regarding ROMs or setting or wipe etc.
It is there to save your phone if you messed up.
It is strange that you cant enter these modes. Normally its really a driver issue and you PC does not recognize your phone.
But it seems that you have tried installing them already.
Just to make sure... Your phone charges normally when you plug it in right? So it cant be a broken cable or broken micro-USB connection on your phone?
Also make sure your phone is really shut down - try resetting it with the red button next to your SIM-card slot.
Your volume buttons were fine before right?
Schlengge said:
The fastboot or flashmode mode should always work - regardless of what you did regarding ROMs or setting or wipe etc.
It is there to save your phone if you messed up.
It is strange that you cant enter these modes. Normally its really a driver issue and you PC does not recognize your phone.
But it seems that you have tried installing them already.
Just to make sure... Your phone charges normally when you plug it in right? So it cant be a broken cable or broken micro-USB connection on your phone?
Also make sure your phone is really shut down - try resetting it with the red button next to your SIM-card slot.
Your volume buttons were fine before right?
Click to expand...
Click to collapse
BINGO!!! ...the usb-cable, it's a pretty new one, but I know, the Z1c doesn't like every cable
Now I can enter Flashtools flash and fastboot mode.
I think I lost almost everything on my Z1c, even my TWRP, don't I?
What is now for noobs like me the best way to install this? http://forum.xda-developers.com/sony-xperia-z1-compact/general/stock-14-6-1-236-customized-lollipop-5-t3264557
Many Thanks!
Flash kitkat, root with pc, install twrp recovery, and flash lp rom from recovery
Xperia Z1 Compact LP .386 rooted
Oreltub said:
Flash kitkat, root with pc, install twrp recovery, and flash lp rom from recover/QUOTE]
...uuumpf, but thanks!
Does kiktkat mean 14.4.A.0.108 Android 4.4.4?
Click to expand...
Click to collapse
Yes
Xperia Z1 Compact LP .386 rooted
Thank you all for your input!
It was the usb-cable which did load my Z1c and in this case (no other data on the phone) light the purple LED and display the "SONY"-logo - but nothing else!
All the future problems are more on the software-side (my head) than on the hardware (the cable)...
Haha glad you sorted it out. I don't know why but I also have USB cables in my collection that just won't work with my Z1C... But now you know
If you need further help in restoring with flashtool you can also look up this thread for some helpful links : http://forum.xda-developers.com/showthread.php?t=2631291
Try to get your hands on a .108 firmware (I always keep one on my PC in case I f*** up ). They are easy to root with EasyRoot and from there you can flash dualrecovery. With TWRP you are good to access your backups or flash anything you want again.
Sent from my D5503 using XDA-Developers mobile app
Schlengge said:
Haha glad you sorted it out. I don't know why but I also have USB cables in my collection that just won't work with my Z1C... But now you know
If you need further help in restoring with flashtool you can also look up this thread for some helpful links : http://forum.xda-developers.com/showthread.php?t=2631291
Try to get your hands on a .108 firmware (I always keep one on my PC in case I f*** up ). They are easy to root with EasyRoot and from there you can flash dualrecovery. With TWRP you are good to access your backups or flash anything you want again.
Sent from my D5503 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks - I'll give a feedback when i'm through!
hi, ive tried to root my xperia xa1 ultra, but it failed after flash boot.img and recovery.img with flashtool.
if i power on without cable, freezes on sony logo with white background, and i have to wait until the battery is empty.
with charger, freeze in sony logo but if i unplug the cable the phone power off.
if i start the phone with cable connected on pc, in FLASHMODE, at 30+- seconds PHONE REBOOT IN FLASHMODE AND LOOP.
bootloader is unlocked.
i cant know what % of battery the phone have, but i think it charges while stuck on sony logo while is connected at the carger(no pc), and then i can unplug and the phone shutdown, and didnt have to wait ALL NIGHT to the battery empty.
so the questions,
is bricked? do i have a solution? how can i undo the failed root process and have the old recovery? remember that i have the loop with flashmode
ps: ive tried to reboot into recovery mode with adb commands but the phone is not recognized in adb devices, and i dont know if this is a possible solution
thanks you all, sorry for very bad english, please help me!!